76239602b4
change avatar Health, from bad penetration depth to relative velocity
2016-07-25 00:51:37 +01:00
cdf215f613
add a missing field to ChatterBoxSessionAgentListUpdates. it is still wrong, and its use even worse
2016-07-23 01:28:57 +01:00
445fb51455
make getBoundsCenter() call GetBoundsRadius() to do the math if needed
2016-07-13 22:35:46 +01:00
00687d5b0f
use geometric center and not sog root position in culling
2016-07-13 22:29:09 +01:00
14296bc792
add missing prim count for stats
2016-07-13 10:25:52 +01:00
abf423e361
be nicer to PIs (actually linux)
2016-07-12 23:23:47 +01:00
bc6c342d01
let radius be radius, not diameter
2016-07-12 17:21:34 +01:00
5bb5eb4e37
don't break child agents start position
2016-07-12 16:33:09 +01:00
e0878864e8
work around missing information on child creation, hidding its effects with reduced view range in culling option is on
2016-07-12 15:50:05 +01:00
d879e119a8
add object UUID to a debug/warn message
2016-07-12 14:45:20 +01:00
fa9a4a9a2b
some changes to RequestInventoryFile()
2016-07-09 00:20:51 +01:00
11a8a722df
don't auto return objects if they have sitting avatars (not npcs) - mantis 7828 with diferent code
2016-07-08 09:56:59 +01:00
e38f16d800
Correction of a test introduced in 34b308d5b6
2016-07-07 13:06:37 -07:00
a058fca1ac
reduce lock time during object inventory ProcessInventoryBackup
2016-07-07 19:54:52 +01:00
668339f936
reduce the initial capacity of InventoryStringBuilder the 16k i added is
...
unreasonable for most cases. The coment about performance on a previus
commit refering to mantis 7904 was wrong, this changes will NOT do much in
terms of objects inventory download time, only a bit on cpu and memory
use"
2016-07-07 16:05:13 +01:00
416c02ef3a
hide the footprints of my previus bug ( take out comented code
2016-07-07 15:30:07 +01:00
a4fc22a6b6
forget InventoryStringBuilder.close()
2016-07-07 15:22:32 +01:00
14b9d31bd9
change InventoryStringBuilder. This will do much for mantis 7904 objects inventory sending is slow by design
2016-07-07 14:38:27 +01:00
f768effa87
move object inventory send to udp queue asset ( was task). Remove a call
...
to RefreshGroupMembership() on start. It was too soon and its Groups
module job
2016-07-07 12:23:53 +01:00
4119e60c0c
avoid InvalidBoundsRadius() calls caused by small changes
2016-07-07 00:16:25 +01:00
d7ab1cdd15
let RePrioritization also work on child agents
2016-07-06 18:58:28 +01:00
beafc99d43
bug fix, etc
2016-07-06 17:31:05 +01:00
0eabfb1e3e
add some needed InvalidBoundsRadius() calls
2016-07-06 16:45:27 +01:00
c02fe98b7d
add test option ObjectsCullingByDistance. In future, if true, it may
...
prevent sending objects outside view range to viewers. DO NOT SET TRUE
unless testing it. Code still not completei!!!
2016-07-06 16:13:27 +01:00
4468aa0dcf
Merge branch 'master' of opensimulator.org:/var/git/opensim
2016-07-04 03:37:45 +01:00
ea8f3c83bf
Finally remove the requirement for an InventoryItem/FolderBase object to
...
be passed into inventory queries.
This makes the API more homogenous and also will more clearly show
coding
errors related to HG inventory where the .Owner field has a meaning
for a query but wasn't always set.
2016-07-04 03:35:48 +01:00
e00603f78a
New config var: DisableObjectTransfer. If set to True, objects never cross; instead they stay in the region, possibly placed outside its borders.
2016-07-03 12:24:31 -07:00
42dd02fc32
scale down position X and Y acording to region size on sending coarse Updates. Viewers need to scale up by same amount.
2016-07-03 15:47:20 +01:00
a443dcce89
try to place avatars on a nicer location, when they arrive into a banned parcel
2016-07-03 10:22:14 +01:00
07c8e79b03
missing file
2016-07-01 19:32:14 +01:00
9358a6ad29
revert several changes to groups modules (agentGroupData is private). change interregions invite/eject messages, etc
2016-07-01 16:10:45 +01:00
90b825cda8
if a NPC is owned, allow access if ownerID matchs parcel owner or it is in the access list. option OS_NPC_OBJECT_GROUP it still needed if access is by group (this option should also work with not owned NPC) NEEDS TESTING, may prove to be a bad solution
2016-06-28 23:30:04 +01:00
a08c354a07
fix NPCs OS_NPC_OBJECT_GROUP option. group ID needs to be set during creation, before scenepresence.CompleteMovement, set tittle just after it.
2016-06-28 18:14:30 +01:00
c34fcae3f3
Added a test for checking permissions in inventory items that are transferred. This is a work in progress. All permission assertions are commented for now. Will get back to this later when permissions are fixed by Melanie.
2016-06-24 12:27:45 -07:00
b522f0916a
Mantis #7934 and related: landing points and telehubs for gods. Added a new configuration variable LandingPointBehavior that can switch between what we're used to in OpenSim and the behavior in SL.
2016-06-23 11:44:59 -07:00
f8bd3d2f2e
Mantis #7935 : regression on transferring attachments over the HG
2016-06-22 11:52:53 -07:00
0b32cf0e8f
Can't do it do it this low in the stack. Attachments on teleports apparently rely on
...
State being != 0.
Revert "Mantis #7932 : Some objects were being serialized with PCode=9 and State != 0 (meaning attachments). That should never happen."
This reverts commit f19199cf4a
2016-06-22 06:21:23 -07:00
f19199cf4a
Mantis #7932 : Some objects were being serialized with PCode=9 and State != 0 (meaning attachments). That should never happen.
2016-06-21 20:28:25 -07:00
34b308d5b6
Guard against multiple calls to SetOwnerId on one logical ownership change.
2016-06-20 16:02:37 -07:00
bc0fc16f44
Still mantis #7929 : apply next owner mask to the new owner, the group.
2016-06-20 15:32:22 -07:00
359908fa88
Related to mantis #7929 : "For sale" was not being accepted, because of permissions fail. This adds a new permissions check CanSellGroupObject. THIRD-PARTY PERMISSIONS MODULES TAKE NOTE OF THIS NEW EVENT.
2016-06-20 10:08:15 -07:00
623a2f859f
Mantis #7929 : objects deeded to the group were loosing some important properties. This makes the "For sale" be visible, but is not the end of the story.
2016-06-20 10:05:17 -07:00
8d99fe095a
Mantis #7920 : group info was not being updated in many situations. (regression) Putting back the heavy messaging.
2016-06-19 17:35:11 -07:00
76ab1ed10c
Restored sending group membership data via EventQueue -- this had been a regression. Took the opportunity to refactor that code, so that both Groups V2 and XmlRpcGroups can use the same function.
2016-06-19 16:27:12 -07:00
206faf0218
Guard against occurring null ref.
2016-06-18 17:00:15 -07:00
1e9a944633
Revert "More debug to diagnose osgrid"
...
This reverts commit b5f29e93f6
2016-06-13 20:39:52 -07:00
b5f29e93f6
More debug to diagnose osgrid
2016-06-13 20:35:40 -07:00
d0c65d15dc
Still mantis #7858 : send kill object / update to child agents too
2016-06-12 14:29:30 -07:00
634d85a30d
Detection of Cylinder and Prism for flexi prims
...
Signed-off-by: Mandarinka Tasty <mandarinka.tasty@gmail.com>
Signed-off-by: Diva Canto <diva@metaverseink.com>
2016-06-12 13:58:20 -07:00
42a9afdc43
Mantis #7858 : DeleteSceneObject done slightly differently. ProcessEntities now checks whether the objects have been deleted and, if so, sends an extra kill object packet, in order to compensate for potential race conditions encountered by the first one.
...
Note: I still cannot reproduce this problem, but I was able to emulate it by adding an artificial delay on ProcessEntities, which did, indeed, result in objects not being deleted. This fix fixed my emulated scenario.
2016-06-12 12:23:52 -07:00
1468ee9179
Mantis #7858 . This is s shot in the dark, because I cannot reproduce the problem. Removed what seemed to be redundant kill object calls that weren't there in 0.8.2 -- kill object is already being called in DeleteGroupFromScene.
2016-06-11 09:38:19 -07:00
bcee4e3772
Fix a line deletion that should not have been deleted
2016-05-23 19:33:36 +02:00
08bd80f5f4
Merge branch 'master' of opensimulator.org:/var/git/opensim
2016-05-23 19:20:05 +02:00
527ea6af02
Fixed discrepancy between code and ini symbols.
2016-05-23 19:19:36 +02:00
775a657bb1
Addressing #7903 . Fix legacy sit offsets to use legacy computation.
...
New offsets of course still use the correct math.
2016-05-23 19:18:24 +02:00
9e21647011
Mantis #7878 -- Landmarks were not being created in HGSuitcaseInventory
2016-05-16 19:36:20 -07:00
59ed89769a
Apply user specified default perms across the board, to items uploaded as well as items created and to rezzed prims in world.
...
This effectively removes the concept of "default permissions" from OpenSim
because all known modern viewers set the permissions flags on login.
Ancient abandoned viewers will now default to the SL defaults.
2016-04-29 22:36:56 +02:00
d42de53dda
Allow default permissions from the viewer to be applied to uploaded objects.
...
Make inventory items reflect coorect permissions immediately unstead of after relog
2016-04-29 21:23:32 +02:00
bedebf9498
Prevent "Object->Take" from working on attachments.
2016-04-29 17:11:36 +02:00
e8b46023e4
Add osRequestURL and osRequestSecureURL with an options list.
...
Only currently supported option is "allowXss" which will send the needed
Access-control-allow-origin: * header to allow xss scripting against
the LSL http server.
2016-03-16 20:04:52 +01:00
b65a18ef3f
Remove unused parameter ShouldUseFireAndForgetForCollisions. It was
...
used a while ago for testing but the execution code was removed.
2016-03-06 14:16:46 -08:00
feb058f5c5
BulletSim: Send out avatar position update if velocity is now zero
...
and it wasn't zero last tick. This will prevent some avatar creeping.
Adjust BulletSim default avatar velocity zeroing so the avatar stops sooner.
2016-03-06 11:30:25 -08:00
ab12a14279
Pushed AssemblyVersion up to VersionInfo, so that we don't need to do global replace anymore.
2016-02-21 11:14:02 -08:00
b34652e9eb
accept mantis 7785 requests, at least until bullet can be also be used fix landing height. (could not test)
2016-01-26 21:42:46 +00:00
668ff1e12c
make sure MaxRegionsViewDistance is lower than MaxDrawDistance
2016-01-26 20:55:00 +00:00
109723dc2d
add option MaxRegionsViewDistance to control the maximum range to tell viewer to connect to Neighbour regions, since that is diferent from view range
2016-01-26 20:39:37 +00:00
b02f29300d
Code cleanup to terse update sending as given in a patch in Mantis 7813.
...
Thanks tqlion!
2016-01-18 06:58:41 -08:00
ee15c51ba4
add npc create option OS_NPC_OBJECT_GROUP. with it the npc will be created with the group of the object with the script, if that object owner is member of that group. This should allow parcel access by group to work now, and not much else. The groupTitle will also be set, it the region option NoNPCGroup is not active.
2016-01-01 23:41:25 +00:00
24aa529715
fix avatar movetotarget that got broken with changes on significant movement. Do it all on scenepresence.cs, and not also on scene.cs. check distance to target only on X,Y if not flying or landing
2015-12-23 21:22:00 +00:00
5135214e5b
physics landing: don't land on top of volume detectors
2015-12-22 13:23:08 +00:00
6437a94388
a few changes to physics new root avatar position height estimation
2015-12-22 00:06:17 +00:00
7081ef948c
clean a bit
2015-12-21 17:56:12 +00:00
4b14ec3c45
add physics help on root agent arrival via some login types and if not under action of telehub or landpoint. will change land to the top of anything physics sees above ground up to 1024m above ground. Only works with ubOde (possible ode but untested). Feature testing... some results may be ugly.
2015-12-21 16:31:49 +00:00
52d7aca6a2
simplify avatar updates throotle control, this possible needs to get more complex again
2015-12-21 13:20:24 +00:00
b31adde5fc
BUG FIX on avatar position updates send control
2015-12-20 11:12:48 +00:00
a4f91e5064
do not change a attachment phatom state on crossings
2015-12-19 19:49:27 +00:00
01a27e8c71
establish a minimun for ReprioritizationDistance
2015-12-19 17:39:42 +00:00
48f6010a1c
a more clean enforcement of BestAvatarResponsiveness (others aren't good at moment
2015-12-19 17:29:51 +00:00
56e28c6c27
fix silly bug: Dynamics are to apply to root prim not child
2015-12-17 19:02:46 +00:00
01b4b25cdb
current priority code uses avatar position not camera, so fix reprioritizer. This may need to be reviewed in future.. it should be camera
2015-12-17 18:15:33 +00:00
ed74fb5da4
save a expensive call to CameraPosition
2015-12-17 12:24:37 +00:00
a4ed6111b0
change updates reprioritization control code. Do it under normal avatar updates timing and with a workjob not a timer issued thread.
2015-12-17 12:20:02 +00:00
3505ab759d
dont bother another thread to try to send if there is no one to listen
2015-12-16 23:54:48 +00:00
764f270d34
revert last change and add delays on testing, since child updates now have time control, since they are heavy http connections
2015-12-16 23:13:10 +00:00
ddd067266b
temporary remove the delay on first child updates
2015-12-16 22:43:31 +00:00
41ae6f06e0
several changes to parcels access control and scenepresence updates rates
2015-12-16 22:16:51 +00:00
9327bb2546
a few more changes on parcels location finding
2015-12-15 18:19:08 +00:00
a9e8bd2884
remove replaced code
2015-12-15 17:20:00 +00:00
c7b963df8f
replace GetNearestPoint... funtions
2015-12-15 17:13:32 +00:00
2f7e9a97db
rename a parameter
2015-12-14 14:07:30 +00:00
78794b1dfe
bug fix
2015-12-14 14:06:17 +00:00
2a354f6c28
calculate land startpoint, endpoint and center estimate when it is updated, it not every time they are needed
2015-12-14 11:57:24 +00:00
6c5005aa3b
several changes to telehubs, LandPoint and land access
2015-12-13 16:59:01 +00:00
36e53b0e03
fix: do tell and log denied access to estate
2015-12-13 12:42:15 +00:00
5d6da6bb35
fix: if no groups module, deny access
2015-12-13 12:14:31 +00:00
f3c03aaa62
several changes to region and land access control - this may be a bit broken now
2015-12-13 11:31:06 +00:00
0934e1cf71
add IsEstateManager check to Permissions
2015-12-12 10:03:07 +00:00
b35d3a3134
fix backup control flag, still a bad merge effect
2015-12-11 02:06:32 +00:00
6de7da467a
keep SOG reference to root part since two many things depend on deleted SOGs not being deleted
2015-12-10 17:04:39 +00:00
62009ba9c0
remove some SOG references on delete to help GC
2015-12-10 14:00:43 +00:00
7d8b783d31
send a full update on GroupResize, not a terse
2015-12-05 08:30:30 +00:00
e37c4e878c
more changes on lookAt and RotLookAt; do something in attachments
2015-12-01 12:11:48 +00:00
a9e58d6175
some changes due to lookAt and RotLookAt
2015-12-01 10:15:38 +00:00
9928076d1a
remove terrain height clamping left over the ushort format testing
2015-11-27 23:46:58 +00:00
bb0db96256
DeregisterRegion from grid earlier on close
2015-11-27 14:01:42 +00:00
e2fb600bf5
change Backup on scene close to Forced, and not dependent on last change time.
2015-11-27 13:56:57 +00:00
c5395cef74
remove thread Heartbeat from watchdog
2015-11-27 13:45:14 +00:00
9afe2b018f
Mantis #7765 : Add new ClampNegativeZ option. Defaults to false to restore prior functionality.
...
Avination code wasn't designed for deep building.
2015-11-26 17:29:50 +01:00
172bb05ec2
suspend the use of DisableSimulator, that is causing teleport and crossing issues
2015-11-25 04:13:13 +00:00
e9345479c4
remove warning on siting in phantom prims without sittarget
2015-11-23 22:11:27 +00:00
cc992bf156
Changes to TerrainModule/ITerrainModule to support importing OARs with different Region sizes to the destination region.
...
Signed-off-by: UbitUmarov <ajlduarte@sapo.pt>
2015-11-22 01:32:36 +00:00
7cac0ccbe3
Changes to TerrainChannel/ITerrainChannel to support importing OARs with different Region sizes to the destination region.
...
Signed-off-by: UbitUmarov <ajlduarte@sapo.pt>
2015-11-22 01:32:08 +00:00
3f4fdacb34
remove a warning
2015-11-21 01:55:17 +00:00
156fdd4908
remove some duplicate using statements
2015-11-21 01:49:31 +00:00
0c93159297
remove unused return value on DeliverMessageTo()
2015-11-20 00:09:56 +00:00
f242137e31
work around some 'tests' errors: add a DefaultPermitions module to sceneB
2015-11-19 01:18:34 +00:00
da5aad87bf
start adding LegacySitOffsets option. TRUE will prevent the use of new math for the compensation of SL sittarget bug, and so not break content. (this is the main code change)
2015-11-17 17:41:09 +00:00
0991ad321a
work around some 'tests' errors: UUID.Zero is a invalid ownerID
2015-11-17 08:58:00 +00:00
f7f5aba597
remove unused parameter
2015-11-17 07:59:11 +00:00
16d158f2f1
work around some 'tests' errors: missing call to InventoryDeQueueAndDelete()
2015-11-17 05:49:39 +00:00
ec0a16c559
work around some 'tests' errors: suspend sit on sittarget until im not 2 sleepy to fix the math
2015-11-17 01:53:44 +00:00
083b52173b
work around some 'tests' errors: suspend undo-redo tests until new ones can be written to conform to new code
2015-11-17 01:44:15 +00:00
67aefb5e42
bug fix: StateSource of a SOG that is not a attachment is StateSource.PrimCrossing
2015-11-17 00:48:35 +00:00
895a57e426
work around some 'tests' errors: backup is async
2015-11-16 23:25:28 +00:00
52a3cc39e9
work around some 'tests' errors: fix math
2015-11-16 22:41:36 +00:00
3a65627481
work around some 'tests' error: internal GroupResize() doesn't heave Undo
2015-11-16 21:42:39 +00:00
10d5c80910
work around some 'tests' error: object is deleted on DeRezObjects, fix last commit side effects
2015-11-16 21:28:59 +00:00
ca4b7efd0f
dont find parts of groups marked as Deleted
2015-11-16 21:11:22 +00:00
99ecf522cd
work around some 'tests' error: object is deleted on DeRezObjects
2015-11-16 20:59:57 +00:00
250db8c82a
work around some 'tests' error: object crossing is async
2015-11-16 20:34:23 +00:00
8c7f475740
Add some values to the SimulatorFeatures cap's OpenSimExtras section:
...
SimulatorFPS: The actual optimal FPS of the simulator, un-fudged
SimulatorFPSFactor: The fudge factor that is applied to the stats sent to the viewer
SimulatorFPSWarnPercent: The percentage below which a lag meter should go to amber
SimulatorFPSCritPercent: The percentage below which a lag meter should go to red
To display the real values, a viewer would divide the reported FPS by the SimulatorFPSFactor and use that to calculate the percentage of SimulatorFPS. E.g. reported is 55fps, SimulatorFPSFactor is 5.0 and SimulatorFPS is 11.
2015-11-12 21:13:44 +01:00
d3911606ef
Move a call to RequestModuleInterface to a new scene callback function
...
because the current implementation would have always returned null
2015-11-12 20:34:09 +01:00
2b937fdf40
reduce the small MTU violation sending terrain compressed patchs
2015-11-10 23:56:08 +00:00
d17633f6c0
replace StatisticsFPSfactor that needed to be changed with FrameTime to a simpler true or false Normalized55FPS that is now TRUE by default. Incorrectly this commit also contains changes that should had their own commits: changes to heartbeat time control ant to gathering and calculation of related statistics.
2015-11-09 15:06:41 +00:00
097c56330a
rename MinFrameTime as FrameTime, since it is not a minimum but a target value; retune its value a bit so reported FPS is closer to integer value; change ode step size acording to reduce jitter in phys FPS; Make Statistics Scaling factor (fludge factor) configurable. (legacy default of 5.0 in code)
2015-11-08 04:28:46 +00:00
69585a4824
More plumbing of the EntityTransferContext (not yet complete)
2015-11-01 19:11:14 +01:00
72684592ba
Merge branch 'master' into avinationmerge
...
Conflicts:
OpenSim/Framework/AvatarAppearance.cs
OpenSim/Framework/Servers/ServerBase.cs
OpenSim/Framework/VersionInfo.cs
OpenSim/Region/CoreModules/Agent/AssetTransaction/AssetXferUploader.cs
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/CoreModules/ServiceConnectorsOut/Simulation/LocalSimulationConnector.cs
OpenSim/Region/CoreModules/ServiceConnectorsOut/Simulation/RemoteSimulationConnector.cs
OpenSim/Region/Framework/Interfaces/IEntityTransferModule.cs
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/PhysicsModules/ConvexDecompositionDotNet/Properties/AssemblyInfo.cs
OpenSim/Region/PhysicsModules/Ode/ODEPrim.cs
OpenSim/Region/PhysicsModules/Ode/OdeScene.cs
OpenSim/Services/Connectors/Simulation/SimulationServiceConnector.cs
OpenSim/Services/HypergridService/GatekeeperService.cs
OpenSim/Services/Interfaces/IAvatarService.cs
OpenSim/Services/LLLoginService/LLLoginService.cs
2015-11-01 03:01:59 +00:00
ea56f4f27c
Introduce an EntityTransferContext carrying the version numbers to pass
...
to all interested functions. Should fix the varregion conditional.
Still a testing version, do NOT use in production!
2015-10-31 18:13:02 +01:00
e8e0ba6d8f
Remove testing cruft that is blocking the new protocols. Unit tests no
...
longer test TP v1 now.
TP v1 will be removed within 6 months anyway.
2015-10-31 17:22:27 +01:00
9232876421
let silly tests override version on local connections
2015-10-31 02:05:11 +00:00
f0fd028ed9
Merge branch 'master' of opensimulator.org:/var/git/opensim
2015-10-31 00:06:34 +01:00
dc6d9eadf3
Testing stage of the new versioning system. Use at own risk. May not
...
work. Will eat your babies. Yada. Yada.
2015-10-31 00:01:35 +01:00
dd9b06e3b6
fix mantis 7733, reverting setting of IsAttachment on first call to full check. Replace instead same simple IsAttachment tests by full checks
2015-10-29 22:14:11 +00:00
9e6d9e0436
friends rights to edit objects display on viewers fixed. This needs to be optimized in future
2015-10-27 01:17:32 +00:00
c3532ba876
set SOG.IsAttachment when doing a full check, so future gets see the right value
2015-10-25 19:59:05 +00:00
28d4afbe3a
replace objects scale clamp by a more readable clamp. Simplify GroupResize and let rescale factors < 1 also be checked for size limits, Set new scales directly not checking them again.
2015-10-23 01:39:53 +01:00
7cb6ecb9f5
Make physics engines finish internal representation of loaded prims before starting simulation so it does start for all at same time. Currently only in use by ubOde
2015-10-22 17:34:28 +01:00
e464bf5d82
recover scripts execution time stat i lost on previus changes. Behing async, this will not add with other time stats giving total frame time, as happens on other simulators. But its a good diag stat.
2015-10-21 18:34:06 +01:00
0045398324
move ugly convertion of axis locks 3 bit flags to a wasted vector3 down to PhysicsActor. Let engines use LockAngularMotion with either Vector3 argument or byte
2015-10-20 19:00:26 +01:00
d8528a7ba0
add axis locks to sop serializer. Now they are also saved to inventory
2015-10-20 18:37:24 +01:00
UbitUmarov