Change user server to handle attachment assets record properly. Ensure
that attachments are not re-rezzed on region crossing. Persistence
will NOT WORK with earliser UGAI!!
Change region server to match.
Places touched:
- Added two events for in-packets to LLCLientView: RegionHandleRequest and
ParcelInfoRequest
- Added sending of two out-packets to LLCLientView: RegionIDAndHandleReply and
ParcelInfoReply.
- Scene handles the RegionHandleRequest, LandManagementModule the
ParcelInfoRequest
- Added inter-region request for LandData by RegionHandle and local position.
This was implemented as XML-RPC request. The returned LandData isn't
complete, it only contains the data necessary for answering the
ParcelInfoRequest
- Added new CAPS (0009) for RemoteParcelRequest and some methods for LandData
handling to LandManagementModule
- Added methods for fake parcelID creation and parsing to Util
- Fixed missing implementation of interface methods.
- Added new file:
OpenSim/Framework/Communications/Capabilities/LLSDRemoteParcelResponse.cs
NOTE: This is part of the patch, too.
Due to the many places touched, I would consider this patch as experimental.
* This is being done by preventing close from being called twice on child agent closure (nres which would have been thrown are being swallowed).
* However, it should be possible to do much better cleanup on this code in the future
occasionally, but are fixed on restart (issue 1919).
This patch introduces the following changes:
1. when a user teleports out of Region A, remove that user's profile
from the Region A user profile cache
2. when a user crosses between regions out of Region A, remove that
user's profile from the Region A user profile cache
3. the user profile cache's session ID member can now be set (written),
and is updated each time a connection with a new avatar is established (ie: a
new avatar enters the region)
4. when a region server looks up a user profile and a cache miss
occurs, fetch the user profile from the user server first instead of
immediately returning null
* May resolves inventory problems that occur when the user moves between two regions`
* e.g. if the user moves to a second region, adds an inventory item, moves back to the original region then tries to manipulate that item
* Not yet implemented for teleport
- LLSDLoginMethod should error out in similar way to XMLRPC login for already logged in condition
- Have LLSDLoginMethod mirror the sequence of the XMLRPC for easier side by side compare
- Log messages report which process XML or LLSD generated them for easier debugging
Add a test event handler (which would fire after a minute if a terrain packet hadn't been acked) to scene to handle the OnUnackedTerrain event, which currently just resends the terrain patch.
The idea of this packet tracking is for the region level application to be able to know if the client stack gave up on sending a packet.
Changes the permissions module to make scripts permissive only when intended
Adds security checks to asset transfers to prevent hacked clients fron
requesting script sources.
Adds security checks to llClientView to verify all aspects of ownership
and permissions for inventory based script retrieval.
UserManager.UpdateUserProfile(UserProfileData).
Adding UpdateUserProfile(UserProfileData) to IUserService interface.
Adding RemoteAdminPlugin.XmlRpcUpdateUserAccountMethod(...) to provide
a remote update capability.
* Migration should be automatic on sqlite and mysql
* Migration is not automatic on mssql, you will need to drop the invType column manually
* Migration should be fine, but as for any db change, I would recommend making sure you have backups before moving past this revision
And reverted CachedUserInfo back to revision 5262.
I don't think most of the inventory problems that people are reporting are due to these, but its easier to deal with one set of potential problems at a time, and I'm not going to get any time in the week to work on this anyway.
The Login service should now read/create new inventory on the inventory server that is set in a users profile.
Also added "Add-InventoryHost" console command to add a support for a new server to a region.
So it would be good if someone could test this. Set up the grid as normal, but then also run extra inventory server on a different computer (well actually it just has to be on a different network hostname, so one using "http://localhost:8004" and one using "http://127.0.0.1:8005" should work) then you need to manually edit the user profile database to set the new servers url in a user's "userInventoryURI" field.
Then on a region server, use the Add-InventoryHost to add the new server url (always include the full url, including http, but don't add a final /)
Login with that account and see if the inventory works.
Of course these needs to be made more user friendly.
TODO next is to make the login server read/write a users inventory from the correct server (the inventory url set in a userprofile)
On the region side, although not tested with multiple servers it should work if that inventory url was set, and the inventory servers urls have been added to the CommunicationsManager, using CommunicationsManager.AddInventoryService(string hostUrl)
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
Fixes:
- Wearable icon and name sreset to default on copy/paste
- Cache is not updated when renaming/moving folders
- Partial refactor to make inventory less dependen on AssetBase having a "Name" field
- Add llGiveInventoryList() function
* This currently has various bugs which are more to do with the way its been hacked together than the feature itself (e.g. on save-oar, ghost prims will appear of the saved
contained items). These will be found and eliminated in subsequent patches.
* Not yet ready for use
* Implemented a hack so regions beyond the 10,000m range will show the map without having to click on the map before they'll start to show. The hack shows regions around the one you're in, but it won't show the one you're in.. you still need to click on the map to get that (not sure why yet). Additionally, the map still only shows pictures for regions that are hosted on the same instance (no change).
having reached the intermediate level of .NET's XmlSudoku, i've
now figured out how to do deserialization using different
XmlSerializers (this stuff begins to grow on me, sigh).
[still not used code, work-in-progress]
* adding convenience property on OSHttpRequest.cs (from awebb)
having spent the last couple of days wrestling with .NET XmlSerializer
and trying to get it to do what is required by XMPP (RFC 3920 & 3921)
this is the preliminary result of that wrestling (you should see the
other guy!): XmppSerializer allows us to serialize Xmpp stanza (and
theoretically deserialize [or reify] them), XmppWriter helps avoiding
various gratuitous crap added in by off-the-shelf XmlSerializer.
this is currently not used anywhere but the plan is to use it for
at least an XMPPBridgeModule.
* User tries to log-in but is already logged in. Userserver will send message to simulator user was in to log the user out there.
* From the UserServer, admin types 'logoff-user firstname lastname message'.
* Some regions may not get the message because they're not updated yet.
* Looks up UUIDNames for script time and colliders in a separate thread.
* Hopefully this'll allow you to look at top scripts on a region that has a lot of scripts without crashing your client thread.
If a request is made for an asset which is not in the cache yet,
but has already been requested by something else, queue up the
callbacks on that requester instead of swamping the asset server
with multiple requests for the same asset.
provide OSHttpRequest and OSHttpResponse to our REST handler.
also, this adds proper RestPlugin.IsGod() checking against the X-OpenSim-Godkey
HTTP request header.
last, i added XML doc comments to RestPlugin.cs
You sure can. This change set restores pants (and the rest of the
default appearance) in grid mode. The
root issue had to do with serializing multi-faced textures to the
grid server. This also restores the lookup path through the avatar
factory module, as that seems the reasonable place to have it live.
Some clean up patches are coming later as well, plus testing on
standalone, but this should be in a good kicking around state for
grid users.
enhancing IStreamHandler and IStreamedHandler interfaces so that OSHttp{Request,Response} get passed in,
allowing RestHandlers to set response status code, redirections, etc.
* If the status cannot be retrieved, then the region startup will terminate.
* The aim of this is for earlier detection of situations where the region can send messages out but cannot accept incoming requests (often due to firewall issues)
* This is currently an extremely simplistic check which completely trusts whatever http uri is given by the region
* This contact may be problematic, though since the user service needs to be able to contact the region http uri, it doesn't seem unreasonable for the grid to have to be able to do so too at this stage
* This change will require a prebuild
* Linden client 1.19.1.4 appears to be happy using UDP for this request again, and Linden's own servers (1.21) don't appear to be supplying the CAPS version currently
* This should for now fix the bug where texture selection in the edit window both shows only already open textures, and later stops subsequent inventory requests from working.
* The resolution takes the form of not crashing the session if the folder the user is attempting to add already exists (e.g. there is one already with the same UUID).
* Printing out warnings instead
* Detaching from right clicking in world, detaches to your inventory.
* If you go up to a prim and attach it from in world, it appears in your inventory.
* Attachment placement is saved when you detach them.
* Choosing wear remembers your last attachment point from inventory.
* Wrote a method to update an inventory item's asset and sends the updated inventory item to the Client
* Wrote a recursive method to find the folder of a known existing inventory item.
* Removed a block on physics object position on creation. This might crash a region or two, let us know via Mantis if your region crashes because of a physics out of bounds error.
* Drop doesn't work. The menu item doesn't even come up. Don't know why :P.
* Now, if you own an item in a prim, you should be able to successfully drag it back into your inventory
* Temporarily, users which are not owners of the item cannot copy it, even if 'everyone can copy' is set
* This is pending fixes/implementation of upstream permission implementation
* Now, emptying the trash should remove folders and the items they contain as well as items which were not in a subfolder.
* This will only work once both the region and grid servers have reached this revision.
* You may also need to clear your cache before this will work
* Refactoring to follow.
* On standalone, folders (and their items) should now be persistently deleted on trash emptying, as well as immediate child items
* An implementation for grid mode will follow.
* This replaces the old behaviour of failing straight away, which could cause lost updates if the inventory service was slow in responding
* This is the first baby step to making all inventory requests behave this way, to reduce inventory lossage
the attached patch set is centered around RemoteAdminPlugin and focuses
mainly on making it more robust (i.e. more parameter checking and better
error reporting) but also we've re-implemented the LoadTerrain stuff that
got disabled during the terrain code reworking:
* missing PostInitialize() calls on region modules that were loaded
for regions created via RemoteAdmin's CreateRegion XmlRpc call
* re-implements RemoteAdmin's LoadTerrain XmlRpc call (probably lost
during the TerrainModule rework)
* adds lots more parameter checking and error reporting to RemoteAdmin
* adds a read-only property to RegionApplicationBase so that we can
access the CommsManager
* adds Exceptions to TerrainModule so that we get better error case
feedback (and can report more meaningful errors in turn)
* adds a CheckForTerrainUpdate() call to
TerrainModule.LoadFromFile() to make terrain changes effective
* adds TryGetCurrentScene(LLUUID) to SceneManager so that we can
retrieve Scenes not only by name but also by LLUUID
cheers,
dr scofield
* A much more significant fix is required to clean up the cache when a user moves out of a region, but really better handling of delayed inventory cache updates needs to be
written first, and possibly better affinity to cut down agent inventory requests when the move is between two regions hosted on the same server.
* This allows caps requests to be routed to regions where the agent is currently a root agent instead of the region that they logged into as it did previously.
* This fixes a wide variety of bugs related to 'can't do X once i've crossed a border'.
* The first seed cap request fails, the second one works. (this generates an error message on the console)
* Experimental.
ansgar and i have been working on an asterisk voice module that will allow
us to couple opensim with an asterisk VoIP gateway.
the patch below consists of
* AsteriskVoiceModule region module: alternative to the plain-vanilla
VoiceModule, will make XmlRpc calls out to an asterisk-opensim
frontend
* asterisk-opensim.py frontend, living in share/python/asterisk, takes
XmlRpc calls from the AsteriskVoiceModule
* account_update: to update/create a new SIP account (on
ProvisionVoiceAccountRequest)
* region_update: to update/create a new "region" conference call
(on ParcelVoiceInfo)
* a asterisk-opensim test client, living in share/python/asterisk, to
exercise astersik-opensim.py
this still does not give us voice in OpenSim, but it's another step on
this path...
* This is very early support which would only be triggered in a rather unlikely case (if the user server correctly received an inventory skeleton, but later on failed to return the whole inventory in a timely manner. Also, this only applies to the 1.19.1.4 client onwards
* Code cleanup and support for other failure cases (failure of inventory caching on region crossing, failure to actually add a folder/item, etc, should follow.
* Added license info to a few files it was missing from.
* Fleshed out the landbuy interfaces
* If you add '-helperuri http://127.0.0.1:9000/' to your list of parameters you tell the client to use when you start it up you can transfer ownership of parcels now in standalone. Structured gridmode requires a lot more work, see the documentation in the example money module. The example money module is not secure especially in standalone mode.
* This will reduce failures where the inventory server is simply slow
* Still need to properly inform the user if the inventory service has failed altogether
* A much larger race condition where the inventory request could be made before the region gets any data at all will also be fixed in the near future.
* This change also fixes a regression from two patches ago where items stopped appearing in standalone inventory
* This is required in order to work towards eliminating some inventory race conditions and to better deal with situations where a grid inventory server is slow or not responding.
* You will probably need to clear your client's cache before this will take effect
* The problem was that the underlying libsecondlife.AssetType was returning "primitive" rather than "object". This fix is in lieu of correcting/updating our libsecondlife.dll
Melanie Thielker