Addresses Mantis #3381
The current implementation works as expected if the object has no rotation or
only rotation around the Z axis; you can spin the object left or right (around
the world Z axis).
It works a little unexpectedly if the object has a non-Z-axis rotation; in this
case the body is spun about its local Z axis, not the world Z-axis. (But SL
also behaves oddly with a spin on an arbitrarily rotated object.)
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
sceneB
* However, I'm not convinced that the actual process in the test completely reflects reality, and a lot of stuff had to be rigged up (which should get resolved over time)
* This facility allows you to save changes to an object that you've rezzed into a region back into their original inventory item without having to take a copy of the rezzed
object.
* However, this is not currently activated since it's not absolutely fully tested and there's a bug lurking in there to do with the sending of the BulkInventoryUpdate packets
Adds a new method to IClientAPI to allow adding message handlers
for GenericMessages (of which "autopilot" is one). Part 2 adds a
specific autopilot handler in ScenePresence.cs.
2) Removing unused variables and functions.
3) Simplifying the navigation logic in ScenePresence.cs. The
original patch was somewhat complex because it included orientation
logic for a future enhancement of orienting the avatar to point
towards the direction being walked. Currently this isn't working,
though, so I removed the orientation code, which leaves just the
smaller and hopefully simpler-to-understand movement code.
* Implements the SendInitiateDownload method in IClientAPI
* Uses the ITerrainModule Interface to write a terrain file to disk then uses a FileStream to read the binary file from the disk and put it in a byte array. and save to the xFer list.
* It then tells the client to download the file and the client initiates an Xfer request.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
Add rezzing time to objects. Add Object return and traffic fields to land
database. Add plumbing for auto return. Implement auto return.
Contains a migration. May contain nuts.
* I believe this is reasonable since code outside the Linden client stack shouldn't be aware of the packet format being used
* I would love to have made the method protected, but the LoadBalancerPlugin is still calling it and resolving that would require more work
* I believe this was the cause of the remaining packet_out_of_order messages in the Linden client logs
* There were race conditions where multiple clientstacks would overwrite each other's sequence numbers
Implementation of llModifyLand() and There is a bug on
permission-check of land-terraforming: x an y-coordinates
are interchanged on function-call ExternalChecksCanTerraformLand.
Correct: x is west, and y is north. 2) Missing check of
"Other allow to terraform-flag" (Parcel.ParcelFlags.AllowTerraform)
old way: each region module interested in chat from client had to
- subscribe to scene.EventManager.OnNewClient
- then in its OnNewClient delegate it would subscribe to
client.OnChatFromViewer to capture chat messages coming
new way: ChatModule is the only region module that uses the "old
way" approach but is now forwarding all client chat via
scene.EventManager.OnChatFromClient
- each region module interested in chat from client now only
subscribes to scene.EventManager.OnChatFromClient
this not only simplifies code, but also allows us to substitute
ChatModule with derived classes (ConciergeModule is going to be one
example).
Also, this changeset changes ChatFromViewer to ChatFromClient as it
doesn't necessarily have to be a viewer that is a chat source.
i've taken great care to only comment out those OnNewClient delegates
that were only used for getting at the client chat --- hope it's not
breaking anything.
Estate/ Manager Owner Uses the Region/Estate Menu Region TAB,
and uses "Teleport Home All Users..." (Action Button), the
action will complete but no one will be teleported and all
users still function in the region ok.
* It seems kind of silly to be building a 256x256 array just to use two 16 float blocks.. but for now the layerdata routine requires it so we'll go along with that.
* We only fill a 32x16 area of the 256x256 float array with data.
* We use patches 0,0 and 0,1 for the first and second patch to determine the direction and magnitude of the wind.
* A little wind wouldn't hurt anyone, right? This is the 'slightly breezy' setting.. hopefully you won't notice 'much' of a difference.
* It turns out the terrain patch routine is similar enough to the wind version that it can be used to hack together a breeze generator with a few mods.
* Not much configuration.. yet. You only get breeze updates in the general vicinity of your camera now to keep bandwidth usage down.. and we're not talking about 'much' movement at the moment.
* initial version... could use improvement I'm sure.
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
the first part of gesture persistence.
----------------------------------------------------------
Attachments no longer vanish on walking crossing. Teleport is still
problematic, but will now be blocked with message "Inconsistent
attachment state" rather than losing the attachment. Detach to be
able to TP in that case.
Places touched:
- Added two events for in-packets to LLCLientView: RegionHandleRequest and
ParcelInfoRequest
- Added sending of two out-packets to LLCLientView: RegionIDAndHandleReply and
ParcelInfoReply.
- Scene handles the RegionHandleRequest, LandManagementModule the
ParcelInfoRequest
- Added inter-region request for LandData by RegionHandle and local position.
This was implemented as XML-RPC request. The returned LandData isn't
complete, it only contains the data necessary for answering the
ParcelInfoRequest
- Added new CAPS (0009) for RemoteParcelRequest and some methods for LandData
handling to LandManagementModule
- Added methods for fake parcelID creation and parsing to Util
- Fixed missing implementation of interface methods.
- Added new file:
OpenSim/Framework/Communications/Capabilities/LLSDRemoteParcelResponse.cs
NOTE: This is part of the patch, too.
Due to the many places touched, I would consider this patch as experimental.
the database is now intepreted as follows: low byte = user flags.
Next byte, low nibble: Deternines the text (Resident, Lifetime, etc)
shown. No customn text support yet.
Adds the new access semantics and the new flag (allow only age verified)
Plumbs in the abuse email address from sim to viewer. The other way around,
libomv appears to be lacking support for the data field in the packet.
Includes a migration, run prebuild!
resending, timeouts, packet discarding. Add notification event for
packet discarding. Add priority scheduling for packet queues.
Add outgoing duplicate detection facility. Correct packet sequencing.
Make provisions for automatic server side throttle adjustments (comes
in next installment)
Add a test event handler (which would fire after a minute if a terrain packet hadn't been acked) to scene to handle the OnUnackedTerrain event, which currently just resends the terrain patch.
The idea of this packet tracking is for the region level application to be able to know if the client stack gave up on sending a packet.
Makes the estate dialog fully functional. Implements all client facing functionality. Moves estate data from estate_settings.xml, which is used to provide defaults, to the region data store. Creates one estate for each region, and places the region in it. Converts all region bans to estate bans.
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
llLoopSound sends out one packet to clients in view, so it doesn't work anymore
when clients enter later on, or the prim is modified in any way.
Solution: Stored sound data on prim, send full update instead.
llStartSound and llLoopSound now accept both LLUUIDs to a sound as well as object
inventory sound names. llStopSound clears prim data and sends full update.
There's some oddness with the parcel counts, but if you can get past the oddness, you can return objects under an owner that you have permission to return.
Nothing huge, but the new button code for producing
a new script does well, but the script will not allow
for name change once created. It reverts back to new script.
Jeff Ames