* Adds a configurable maximum object mass before the mass is clamped. Default is 10000.01. Configurable by changing maximum_mass_object in the [ODEPhysicsSettings] section.
* Clamping the mass is important for limiting the amount of CPU an object can consume in physics calculations. Too high, and the object overcomes restitution forces by gravity alone. This generates more collisions potentially leading to 'deep think'.
having this enabled results just in warning messages if no message service is actually available
haivng this disabled results in an unexpected failure if no message service is available
This appears to now give better ODE physics response (less sinking into the ground, etc.)
Please change it back if this is actually a bad idea for some reason
* Fixing a bug where the max burst rate for the state category was being set as unlimited, causing connections to child agents to saturate bandwidth
* Upped the example default drip rates to 1000 bytes/sec, the minimum granularity for the token buckets
* Hip offset should have been added not subtracted (it's a negative offset). This puts avatar feet closer to the ground
* Improved duplicate checking for terse updates. This should reduce bandwidth and walking through walls
* Added contacts_per_collision to the ODE config section. This allows you to reduce the maximum number of contact points ODE will generate per collision and reduce the size of the array that stores contact structures
* Commenting out the MySQL startup sequence that cleans out dropped attachments under the advice that it is no longer relevant. If anything, it could be brought back as a database cleanup console command
* Updated to the latest libomv 0.8.0-pre. UUID.TryParse() will no longer throw and catch exceptions for most failed UUID parses
* Added a new [Startup] config option called use_async_when_possible to signal how to run operations that could be either sync or async
* Changed Scene.ForEachClient to respect use_async_when_possible
* Fixing a potential deadlock in Parallel.ForEach by locking on a temporary object instead of the enumerator (which may be shared across multiple invocations on ForEach). Thank you diva
* Avoid allocating an Action<IClientAPI> object every round of the OutgoingPacketHandler
* Removed unnecessary semi-colon endings from OpenSim.ini.example [InterestManagement] section
* Only initialize Util's SmartThreadPool if it is actually being used
* No longer initializing Util's SmartThreadPool with a custom max stack size. From MSDN: "Avoid using this constructor overload. The default stack size used by the Thread(ThreadStart) constructor overload is the recommended stack size for threads."
* Changed Util.FireAndForget() to use any of five different methods set with async_call_method in the [Startup] section of OpenSim.ini. Look at the example config for possible values
* Replaced calls to ThreadPool.QueueUserWorkItem() with ThreadPool.UnsafeQueueUserWorkItem() since OpenSim does not use Code Access Security sandboxing
* OnQueueEmpty is still called async, but will not be called for a given category if the previous callback for that category is still running. This is the most balanced behavior I could find, and seems to work well
* Added support for the old [ClientStack.LindenUDP] settings (including setting the receive buffer size) and added the new token bucket and global throttle settings
* Added the AssetLoaderEnabled config variable to optionally disable loading assets from XML every startup. This gives a dramatic improvement in startup times for those who don't need the functionality every startup
* Moved all priority queue access to helper functions to improve reliability and readability
* New version of CSJ2K.dll (from libomv source tree) that fixes a JPEG2000 comment decoding bug
* Re-added openjpeg-dotnet files since they are used elsewhere in OpenSim * Updated prebuild.xml with a reference to CSJ2K
* Renamed IJ2KDecoder and J2KDecoder member names to follow standard naming conventions * Removed j2kDecodeCache cruft and replaced it with the OpenSim cache system * Rewrote the default layer boundary algorithm to use percentages instead of an exponent * Switched from an infinite in-memory cache to an expiring cache (10 minute timeout) * Slightly quieted logging errors for failed texture decodes
Replacing openjpeg-dotnet decoding with managed CSJ2K decoding. Should be much more reliable, faster, and use less memory
* Re-added openjpeg-dotnet files since they are used elsewhere in OpenSim * Updated prebuild.xml with a reference to CSJ2K
Http-in and makes the host name for URL generation configurable.
Applied with changes:
llGetSimulatorHostname was not changed, because the change breaks
existing behavior and carries a data exposure risk. That value needs
to be configurable, the proposed fixed change is not acceptable.
sweep every 10 minutes. If any texture data is older than 12 hours, it is
regenerated and the memory cache is refreshed. After each decode, the thread
delays for 5 seconds.
setting the path for it. This commit introduces NEW DEFAULT BEHAVIOR. To
retain the old behavior (eternal cache) you will need to change your OpenSim.ini
and set the timeout to 0.
Fixes cookie handling and header name casing in HttpServer
Currently, cookies are never being processed on incoming HTTP requests. This patch makes sure cookies are parsed and inserted into IHttpRequest.Cookies, and fixes incoming headers to always have lower-case names.
http://opensimulator.org/mantis/view.php?id=4052
Add ability to silence IRC relay of region joins and quits from certain users
This is useful for admins who wish to remain hidden, or service bots.
Thanks RemedyTomm
* Hopefully this allows older mono versions to still work.
* A couple of points of note:
* TimeZoneInfo.. replaced with DateTime.UtcNow - TimeSpan.FromHours(7);
* HashSet<uint> replaced with Dictionary<uint,object>
* Force use of the managed version of ReaderWriterLockSlim (don't use the pre-processor defs)
* If this doesn't melt the Http Server, this will significantly reduce the number of threads in use on regions with many users.
* Adds AddPollServiceHTTPHandler, and RemovePollServiceHTTPHandler to BaseHttpServer
* Generic enough to be used for many long poll services, not only the EventQueue.
* Made various changes to BaseHttpServer to accommodate the new interfaces.
* This version has been significantly re-architected and may fail in unusual and insidious ways.
* Please pay attention to any errors you get and post a Mantis if you can reproduce an issue with the HTTPServer. I'm including the pdb and having the http server compiled in debug for a few weeks so that when an error occurs, it'll print the pertenant data.
* Once again, this is the full C# WebServer, not the lite branch that is included in LibOMV (we need SSL!)
this commit finally adds the VivoxVoiceModule: it supports positional
as well as conference call type voice (currently only per region
server), region and parcel voice, speaker indication (LL client
family), direct avtar-to-avatar voice chat. NOTE: you need to obtain
an customer admin account from Vivox to be able to use this module ---
DON'T ask me about how to about an admin account, i've NO clue, we
just wrote this code.
Set av_capsule_tilted to false in opensim.ini. Default is true, so there is
no change in avatar behavior (and no breaking of existing content which
relies on the tilted capsule).
This commit straightens up the avatar capsule so it behaves consistently
(e.g. same collision behavior against prims regardless of which direction
the avatar is coming from; ability to fit through narrow doorways).
Please note this introduces other side effects which have not been fixed.
In particular:
* The avatar frequently falls through the terrain if it is not flat, though
the avatar behaves pretty well on flat terrain. This requires investigation
of the ode terrain collider.
* The apparent foot position of the avatar with respect to the ground
is changed. This requires investigation of the avatar height/capsule height.
Please consider this as work in progress.
option for LLUDPServer. On windows .NET the default socket receive
buffer size is 8192 bytes, on recent linux systems it's about
111K. both value can be a bit small for an OpenSim instance serving
many clients. The socket receive buffer size can be configured via
an OpenSim.ini config option
- adds a general catch clause to LLUDPServer.OnReceivedData() to
prevent it submerging when an unexpected Exception occurs.
This change moves texture send processing out of the main
packet processing loop and moves it to a timer based
processing cycle.
Texture packets are sent to the client consistently over
time. The timer is discontinued whenever there are no
textures to transmit.
The behavior of the texture sending mechanism is controlled
by three variables in the LLCLient section of the config
file:
[1] TextureRequestRate (mS) determines how many times per second
texture send processing will occur. The default is 100mS.
[2] TextureSendLimit determines how many different textures
will be considered on each cycle. Textures are selected
by priority. The old mechanism specified a value of 10 for
this parameter and this is the default
[3] TextureDataLimit determines how many packets will be sent for
each of the selected textures. The old mechanism specified a
value of 5, so this is the default.
So the net effect is that TextureSendLimit*TextureDataLimit
packets will be sent every TextureRequestRate mS.
Once we have gotten a reasonable feeling for how these parameters
affect overall processing, it would be nice to autonmically manage
these values using information about the current status of the
region and network.
Note that this also resolves the pathologcal problem that
previously existed which was that a seated avatar generated very
few in-bound packets (theoretically) and would therefore be the
least able to retrieve the images being displayed by a
projector script.
Several improvements in the connectors themselves.
Several improvements in configurations.
Needed to add a hack in IUserService and UserManagerBase, to be removed when that service is refactored.
See the files: bin/config-include/GridCommon.ini.example and bin/config-include/StandaloneCommon.ini.example to configure and enable this caching method.
See the files: bin/config-include/GridCommon.ini.example and bin/config-include/StandaloneCommon.ini.example to configure and enable this caching method.
exe for each function, rather each function is a connector and the server ini
loads them. If you like your multiple processes, use -inifile with the server.
Otherwise, you get one server process that serves all configured funcions, see
example .ini. The new exe is OpenSim.Server.exe. Clean your bin, loads of names
have changed!
We've encountered problems with textures never fully downloading and
objects not moving or being deleted (from the client's point of view)
even when the bandwidth settings on the client have been set very
low. This can happen over reasonably lossy links (eg you're on the
other side of the world from the server) as the server retries 3 times
and then gives up.
Whilst its possible to set ReliableIsImportant, this forces the server
to keep retrying no matter what which potentially could lead to
problems. This patch allows for the setting of MaxReliableResends
explicitly (is set to 3 normally) in OpenSim.ini so if you know you
will have clients connecting with poor connections you can set it a
bit higher (10-15 works quite well even for very poor connections).
This may break a lot of things, but it needs to go in. It was tested in standalone and the UCI grid, but it needs a lot more testing.
Known problems:
* HG asset transfers are borked for now
* missing texture is missing
* 3 unit tests commented out for now
default but can be enabled in OpenSim.ini. If enabled, things can be sold
for $0. Other amounts will cause the buyer to see a message and the transaction
will fail.
- AssetType isn't InventoryType. Those enums contain different numbers. Use AssetType for the asset type, InventoryType for the inventory type.
- The ToString method (or ToLower) of AssetType/InventoryType doesn't necessarily return the correct LLSD string.
- Replaced several magic numbers by their corresponding enum.
- Fixed the invType for gestures and animations in the library.
This should fix Mantis #3610 and the non-terminating inventory loading
Move json stats to non-published resource name
Remove well-known resource name for json stats,
creating dynamic uris with private keys and add
a user configurable resource name for region owner usage.
Different people using Hippo 0.5.1 report that trying
to send group instant messages crashes the viewer
(Hippo 0.5.1). This is the case even for empty groups
or if all group members are online.
Don't allow packets to be resent before they have actually been sent for the
first time. Switch from serializing a packet to get it's length to the LibOMV
provided Length property. Fix resend timing. Fix the use of dangling references
to Acked packets. Fix the packet handler to play nice with the packet pool.
Fix the packet pool. Add data block recycling to the packet pool. Packet pool
is now ENABLED by default. Add config option to disable packet and data block
reuse. Add ObjectUpdate and ImprovedTerseObjectUpdate to the packets being
recycled.
The attached patch provides the necessary infrastructure to support
security and authentication features of the xmlrpc server.
* Read/Write keys for accessing a Group's xmlrpc service.
* Requiring user session verification for write operations.
- Adds an admin_modify_region call to allow changing of parcel voice
settings and changing of public/private status
- add boolean "public" and boolean "enable_voice" to
admin_create_region XmlRpc call to allow specifying of
public/private status and to allow enabling voice for all parcels;
also added config variables to allow setting of defaults for those
- fixing cut-and-paste artefacts
* Refactors the xmlrpc calls to a single location to
make it easier to debug and include alternative
xmlrpc call mechanisms
* Includes an alternative xmlrpc call mechanism that
sets HTTP Keep-Alive to false which solves nearly all
System.Net exceptions on some windows environments
Added is a patch that adds a rough Groups implementation. This patch allows
the creation, adding and maintaining Groups, Roles and Members. Work has begun
on a very naive implementation of messaging, and minimal support for notifications
{no attachments yet}. Proposals are not yet supported, but are on the to-do list.
This implementation is not active by default, and must be configured in
OpenSim.ini to become active.
* Tweak the LLSetStatus results in the ODEPlugin. Hopefully it's a little less unstable.
* ODEPlugin is using experimental math for LLSetStatus, use with caution! :)
Fixes Mantis #3421
Change the agent/avatar events subscriptions to just OnNewClient. The data only needs to be sent once and keeping track of log ins/movements is not required. This will also send cloud data to child agents so that they can see clouds above neighbouring regions not just regions that they have visited.
- Change several classes to use the new plugin for handling of region-modules
(NOTE: No regionmodule is using this yet)
- Add necessary prebuild parts (don't forget to runprebuild)
Attention: Work in progress. This shouldn't break anything, but you never know...
* It's not ready to try. It doesn't do what you expect in many ways.
* It throws errors and prints jibberish on the console
* Test it out only if you're brave and you've backed up first.
* The opensim.ini line is physics = BulletDotNETPlugin
Added safemode config to Standalone Hypergrid, similar effect to AllowRegionAccessToInventory in Inventory Server. Everyone should have these vars set to their default values except me!
Justin Clark-Casey (justincc)