This currently prints caps requests received and handled, so that overload of received compared to handled or deadlock can be detected.
This involves making BaseStreamHandler and BaseOutputStream record the ints, which means inheritors should subclass ProcessRequest() instead of Handle()
However, existing inheriting classes overriding Handle() will still work, albeit without stats recording.
"show caps" becomes "show caps list" to disambiguate between show caps commands
also moves the implementing code into LLUDPServer.cs along with other debug commands from OpenSim.cs
gets all debug lludp commands to only activate for the set scene if not root
This cannot be triggered as an event from Scene.EventManager since some invocations of UuidGatherer (e.g. IAR saving) use scene objects which are not in scenes.
There needs to be some way for modules to register for events which are not connected with a particular scene.
This is in order to reduce the likelihood of naming clashes, make it easier to filter in/out attributes, ensure uniformity, etc.
All dynattrs in the opensim distro itself or likely future ones should be in the "OpenSim" namespace.
This does alter the underlying dynattrs data structure. All data in previous structures may not be available, though old structures should not cause errors.
This is done without notice since this feature has been explicitly labelled as experimental, subject to change and has not been in a release.
However, existing materials data is being preserved by moving it to the "Materials" store in the "OpenSim" namespace.
Functionally the same as the patch by tglion in http://opensimulator.org/mantis/view.php?id=5334
However, not yet perfect - after editing just root prim on reattach the position is still wrong, though other prims are not set to far off positions.
This was introduced in git master d214e2d0 (Thu May 16 17:12:02 2013)
Caught out by the fact that value types used in iterators act like references and this was dispatched asynchronously.
Should address http://opensimulator.org/mantis/view.php?id=6658
This is because scripts (at least on XEngine) start unsuspended - deceptively the ResumeScripts() calls in various places in the code are actually completely redundant (and useless).
The solution chosen here is to use a copy of the SP attachments and not have the list locked whilst creating the scripts when an avatar enters the region.
This looks to address http://opensimulator.org/mantis/view.php?id=6557
This purports to fix the issue described in http://opensimulator.org/mantis/view.php?id=6653 where the camera can end up following the requested sit prim rather than the actual.
The original spot was by Vegaslon, this commit just goes about it in a slightly different way
This commit also makes m_requestedSitTargetUUID to be the actual UUID, which is consistent with m_requestedSitTargetID which was already doing this.
However, this adjustment has no practical effect since we only currently need to know that there's any requested sit UUID at all, not which one it is.
The UMMTGUN form of Unknown User seems to appear because a viewer sometimes sends a UUIDNameRequest UDP request that fails to find a binding.
However, in theory the incoming agent should have made that binding before any such request is triggered.
So moving this binding to an earlier point in the process to see if this makes a difference.
Unknown user name is also updated to UserUMMTGUN2 - if you see the old name then you need to clear your viewer cache.
This relates to http://opensimulator.org/mantis/view.php?id=6625
to avatar when it becomes root. This packet shows up in the viewer
logs as an error and appears to cause problems for completing the
texture rebake process for v1 viewers in some cases.
This is controlled by the viewer, not the server.
So as per http://wiki.secondlife.com/wiki/LlSetSoundQueueing, only two sounds can be queued per prim.
You probably need to use llPreloadSound() for best results
This is to reduce race conditions where neighbours may be responding erratically, thus mixing up create and close agent requests in time.
This mirrors OpenSimulator behaviour on enabling child agents where each region is contacted separately.
This was because this particular code path (unlike user delete) only sent kills to root presences, for no apparent good reason.
Added regression test for this case.
This fixes http://opensimulator.org/mantis/view.php?id=6627
This fixes the combined bounding box location for regions bigger than 256x256.
It also fixes the position on taking coalesced objects in the non-root regions, where position checks are properly done on rez instead.
It also fixes the megaregion land channel to return null if the land does not exist, which should probably also be done for the ordinary land channels rather than returning a dummy region.
Inspiration from Garmin's commit in http://opensimulator.org/mantis/view.php?id=6595. Thanks!
This was because AsyncCommandManager was handing an item ID to IHttpRequestModule.StopHttpRequest() rather than the expected request ID.
This commit also makes the http request asynchronous using BeginGetResponse() rather than doing this by launching a new thread
so that we can more safely abort it via HttpWebRequest.Abort() rather than aborting the thread itself.
This also renames StopHttpRequest() to StopHttpRequestsForScript() since any outstanding requests are now aborted and/or removed.
By checking against the grid's Avatar data, we can ignore viewer side attachments but still initiate these calls simulator-side.
Initiating simulator-side is always necessary for version 1 viewers.
This is a further commit to resolve http://opensimulator.org/mantis/view.php?id=6581
This was because the script resumption in AttachmentsModule was firing the attach event instead.
Had to reinstate the code in 285bd3a do we can resume the scripts there instead, though the bug existed before its removal.
This is to resolve http://opensimulator.org/mantis/view.php?id=6578
This is a further effort to reduce v3 viewer race conditions where this call may clash with the viewer signalling attachment wearing from its current outfit folder.
This is to simplify the code (no tricky 'wasChild' signalling required)
and to reduce the risk of a thread clash between simulator-side attaching (necessary for v1 viewers)
and the viewer-side attaching the v3 viewers perform.
with our own and add export permissions as well as a new definition for "All" as meaning "all conventional permissions" rather than "all possible permissions"
This now does a check for border crossing (required to trigger the teleport) immediately in SP.MakeRootAgent().
If left any later, it looks like the physics scene changes the position and stops the cross happening.
If done any earlier, nothing happens because the cross-code currently requires a PhysicsActor to be in place, thuogh it's probably not necessary for this case.
Also adds regression test for the case where the viewer couldn't connect with the destination region.
Also refactoring of regression test support code associated with entity transfer in order to make this test possible and the code less obscure.
This resolves issues (at least in my tests with LL 3.3.4) where this can make attachments invisible until one zooms in on the avatar.
This doesn't affect version 1 viewers since this delay is shorter than the login delay.
This doesn't increase the login time since this part of the process was already being performed asynchronously.
This may be a temporary solution.
For some reason, sending updates before this will not have this effect.
This may be something related to some viewers (e.g. LL 3.3.4) or something OpenSimulator isn't getting quite right.
This addresses http://opensimulator.org/mantis/view.php?id=6567
This creates a ScenePresence.GetWorldRotation() with the same semantics as SOP.GetWorldRotation()
SP.Rotation can't be used since it's relative to the sat upon prim if the avatar is sitting.
This allows region modules to add dynamic objects to SOPs rather than having to continually push and pull OSD dynamic attributes.
This is to explore the original MOAP use case for dynamic attributes where it could be very awkward and possibly time-consuming to keep reconstructing MediaEntrys from stored DynamicAttributes.
This commit adds a DOExampleModule to demonstrate/evolve this code.
Dynamic objects involve no storage or persistence changes - the 'backing store' for any data that does need to be saved will remain the DAMap.
DOExampleModule in this commit only attaches a fresh dynamic object. Actually constructing this from stored dynamic attributes and handling persistence is left for later.
These changes should affect no existing functionality, though it may or may not reveal necessary changes in DAMap down the road.
This change also corrects the setting names - they were actually wrong (though the text in {} was correct).
If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
This is for consistentency with the verb:noun naming approach existing json script functions and other script functions.
Corresponding c# methods also changed since verb:noun is also the .net c# method naming guideline (as used by OpenSimulator) and for consistency with script functions.
As agreed with cmickeyb
interface. JsonPathType returns the type of node pointed to by the
path and deprecates the functionality of both JsonTestPath
functions. JsonArrayLength returns the length of an array node.
Fix bug that allowed only login access to regions with mis-configured telehubs. Administrators now have teleport access when there exists a mis-configured telehub in the region. Estate owners are now placed at region center in the absence of spawnpoints instead of being denied access. Grid Gods are unrestricted. All others are denied access to the region until spawnpoints are assigned to the telehub object.
script functions. Adds JsonAttachObjectStore to associate a store identifier with
an object (scripts can only access the store in their host object, this could be
extended but isn't necessary for now).
Note this opens a method to the DAMap OSDMap. This will be removed later, but
greatly simplifies the code for now.
The JsonStore and these scripts are disabled by default.
Implements the parameters as properties, the serialization and
database storage (MySQL only). Implements llSetPrimitiveParams for
prim physics shape and the other 4 extra params. Only the prim shape type
"None" is currently functional. No support for the Viewer UI (yet), that
will be ported in due course. Lots more to port, this is a large-ish changeset.
This would practically never happen.
This makes this overloaded version of the function consistent with the other version.
It looks like this accidentally came over in commit c5af16a from Tue Oct 16 12:40:21 2012
However, there's arguably a case for looking for an item name that matches a UUID before assuming that the identifier is already an asset ID.
Renames functions to better reflect what they do.
This is so that code registering with modInvoke() can reuse this code to provide functions that behave in a consistent manner with existing LSL/OSSL functions.
This is mostly Bluewall's work but I am also bumping the general version number
OpenSimulator 0.7.5 remains in the release candidate stage.
I'm doing this because master is significantly adding things that will not be in 0.7.5
This update should not cause issues with existing external binary DLLs because our DLLs do not have strong names
and so the exact version match requirement is not in force.
This also changes UuidGatherer to reutn an AssetType.Unknown for embedded script/lsl references instead of Texture, since these are often not textures.
This is added to help people in determining when they have missing assets such as textures, etc.
In this case, one wants to run "fcache clear" first.
sends an asset transaciton but it is empty. So we can't ignore name data
when a transaction is present and can't treat every transaction as valid.
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
Also hooks up moving_start and moving_end script events, eliminating itemID on XEngine EventManager methods since this is completely unused.
An adaptation of the patch in http://opensimulator.org/mantis/view.php?id=6515
Thanks Garmin Kawaguichi and Signpost Marv.
Diva Canto