c4c6b457c3
correct misleading "fcache status" text - deep scans are not performed when this command is invoked.
2011-07-30 01:16:10 +01:00
2f5995f5c0
Temporary code to change bad AvatarHeight values in the AvatarService to the default Ruth height.
...
I was persuaded to do this because simulators on osgrid will persist in inserting bad values for an unknown length of time, even after the original simulator bug which was inserting bad values is out in an osgrid distro
This code can be removed at some point in the future, though I think there is an argument for having services police these values in open grids.
2011-07-30 00:58:17 +01:00
6d866ba6d5
Temporarily put in a log line which shows which locale the user is running in.
2011-07-29 23:43:35 +01:00
9a5e0ede7c
For all Util.FireAndForget invocations, set thread to en_US before continuing wtih the invocation.
...
This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire.
Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this.
Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable.
Arguably, it would be better to do this where data is sent, but doing it here is much easier.
All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
2011-07-29 23:21:57 +01:00
84c68c61bd
When we start the appearance saving thread, make sure we set the culture to En_US so that a different culture doesn't save values with commas as decimal points, etc.
...
This will hopefully stop giants stalking the grid.
See http://opensimulator.org/mantis/view.php?id=5614
2011-07-29 22:27:04 +01:00
5043be13fb
Return null from CreateMeshFromPrimMesher if OpenJPEG decoding of the sculpt data fails.
...
This is to address http://opensimulator.org/mantis/view.php?id=5612
2011-07-29 21:49:23 +01:00
f3c5a5b745
fix extremely minor Ode bug where the _taintedPrimL list would always be cleared on every OdeScene.Simulate() even if it was already empty.
2011-07-29 01:18:42 +01:00
2a39d0cdb0
refactor: Move another chunk of ninja code out of the OdeScene.Simulate() loop for consistency and readability.
2011-07-29 00:51:07 +01:00
3f0d8f3cbf
refactor: Simplify reading OdeScene.Simulate() loop by shunting all the NINJA joints stuff into its own method.
...
Now if ninja joints isn't active (which is the default) don't have to wade through a lot of massively indented irrelevant code.
2011-07-29 00:39:02 +01:00
9c6227da66
refactor: unindent the OdeScene.Simulate() loop to ignore the long commented out ifs and locks
...
This is to make it more readable.
2011-07-29 00:23:42 +01:00
8c3eb324c4
When using osTeleportAgent() and osTeleportAvatar(), only teleport if the region name exactly matches (not near matches)
...
This is to prevent situations where the first name returned by GridService.GetRegionsByName is not one that exactly matches the given region name, even when there is an exact match later on in the list.
Only the above two functions call this teleport method (the map uses a different routine) so this seems safe to change.
Addresses http://opensimulator.org/mantis/view.php?id=5606
2011-07-29 00:00:35 +01:00
c4ffcd4b7d
Ensure that packet headers get parsed correctly
2011-07-27 09:12:00 +01:00
4cdc8806fb
Fix LLTextBox to work with the updated libOMV
2011-07-23 11:40:38 +01:00
504de8bc47
Pass the first name and last name from the agent circuit data to the authorization service rather than from the account.
...
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517 , this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
2011-07-23 03:48:53 +01:00
4eaca4884e
Fixed serverside_object_permission default value confliction
2011-07-23 02:26:13 +01:00
be9b4ad23a
For default everyone permissions on library items, make notecards and scripts non-modifiable (but still copyable, etc).
...
Users should not be given the impression that they can modify these items.
This still does not solve the issue where library items cannot be dragged into prims or user inventory any time after they are initially seen.
Curiously, manually copying and pasting still appears to work.
On the surface, this seems to have something to do with library item caching on the client, since deleting the cache allows drag to work again once
Not sure what the exact problem is.
2011-07-23 02:18:23 +01:00
f0895028e9
Remove manually permissions settings on all current library items so that they use the defaults instead.
...
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
2011-07-23 02:13:11 +01:00
fcaa4f6012
Revert "Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default)."
...
There actually are uses for this. I will correct the perms instead since some entries appear to be wrong.
This reverts commit 667b54f5a2
2011-07-23 02:05:51 +01:00
667b54f5a2
Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default).
...
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
2011-07-23 01:59:14 +01:00
aadc4eb3b8
Fix problem where sculpts were not getting physical proxies
...
Fixed this by inspecting Shape.SculptEntry at various places instead of Shape.SculptType. Sculpties actually have a SculptType of Cylinder - only true mesh is SculptType.Mesh
This addresses http://opensimulator.org/mantis/view.php?id=5595
2011-07-22 19:23:38 +01:00
6ac0bc7259
Thank you, Michelle Argus, for a patch that adds reading the agent limit
...
from XML properly.
2011-07-22 12:36:05 +01:00
02e54c57c4
Generate the initial maptile asynchronously
...
Signed-off-by: Melanie <melanie@t-data.com>
2011-07-22 09:52:21 +01:00
d8228f4374
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-07-21 21:12:50 +01:00
71ef4a8fb3
When an uncached asset is requested multiple times concurrently, only load it once
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:52:56 +01:00
56830bfe07
When handling SetAppearance packet, always save the appearance; not only if the texture was changed
2011-07-21 20:18:36 +01:00
f97278610c
Fixed updating avatar appearance
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:13:32 +01:00
3270bd560e
Removed unused AddPrimShape methods in PhysicsScene caused by merge conflicts
2011-07-20 14:34:02 -07:00
9fc7d65df7
Apply the localID to the Physics actor to prevent null calls later
2011-07-19 18:26:36 +01:00
51c47677a1
Tidy up a superfluous AddPrimShape override in PhysicsScene
2011-07-19 18:17:19 +01:00
ee829a71c2
On all undo/redo operations, consistently lock the undo object for everything, in order to avoid any deadlock issues.
2011-07-19 06:13:05 +01:00
c50533659a
If we store an undo, wipe anything already present on the redo stack
...
This stops problems when we undo a few steps and start off down another path.
Surprisingly, apart from this now fixed problem, redo appears to be working too.
2011-07-19 06:11:16 +01:00
ec1ecd3633
stop redo throwing an exception if there is nothing to redo
2011-07-19 06:05:23 +01:00
25c532f2ec
refator: simplify UndoState.Compare() code
2011-07-19 05:58:52 +01:00
9dd5a24495
rip out pointless null checks in UndoState where part can never be null
2011-07-19 05:51:19 +01:00
bc3679b67d
Fix undo when changing just the root prim's position in a linkset.
...
I think (ha ha) this largely fixes undo, except for the fact that rotation a set of prims with 'edit linked parts' selected doesn't quite work properly (though this works fine if the checkbox isn't selected).
Also, the double undo bug for resize is still present.
Redo might be incredibly buggy, haven't even looked at that yet.
2011-07-19 05:46:17 +01:00
0ef29da9b2
refactor: rename UpdatePrimPosition() to UpdatePrimGroupPosition() for consistency
2011-07-19 05:20:04 +01:00
62325829ec
comment out all kinds of debugging guff
2011-07-19 05:14:58 +01:00
1fdb16f1cd
Fix undo for rotation of the root prim in a linkset on its own.
...
The only obviously broken things right now are the undo of the position of just a root prim (stays in place) and the fact that resizes need two undoes.
2011-07-19 05:05:50 +01:00
b2722e984a
Fix undo of rotation of single prims in a linkset
2011-07-19 04:40:02 +01:00
97f1edfd95
Fix undo of prim group rotation.
...
This isn't that great since I think I broke it a few commits earlier.
Undo of rotation of individual prims in a linkset is still broken
2011-07-19 04:15:27 +01:00
4b9ef4f39c
Rename UpdatePrimRotation() to UpdatePrimGroupRotation() since this is what it actually does and is more consistent with other method names.
2011-07-19 03:44:49 +01:00
7c468cda36
Stop undo of just the root prim position in the linkset from shifting the whole linkset.
...
However, what happens now is that undo just doesn't do anything when the root prim is selected on its own. This requires more code than just fiddling with undo states.
2011-07-19 03:38:22 +01:00
c94dc95844
fix undo when resizing of non-root individual prims in a linkset
...
undo resize, rotation and position still needs fixing when only editing root prim of a linkset
2011-07-19 03:27:16 +01:00
430a4aeba8
Fix undo for resizing linksets
...
This involves implementing a boolean in UndoState to signal whether the undo needs to be done for an entire group/linkset or just a single prim
Resizing individual components of linksets is still dodgy.
Resizing still has to be down twice, since for some reason the client is sending two multiobjectupdate packets on every resize except the very first. This applies to single prims and linksets. Need to look into this.
2011-07-19 03:01:54 +01:00
86f45f6fe7
remove undo state storage in a few places where it's pointless
...
no functional effect - existing bugs still remain
2011-07-19 01:24:43 +01:00
6fc74b36d1
Make various tweaks to undo code in an effort to get things working better.
...
Undo rotation and position appear to be working.
Resizing a single prim appears to be working, though the undo has to be done twice.
Resizing a group of prims still does not work properly - possibly because in the UndoState we don't store a knowledge of when we're resizing a whole group rather than individual prims.
This needs to be addressed.
2011-07-18 04:54:21 +01:00
aec3b58a57
use standard sdk stack in terrain model rather than OpenSim.Framework.UndoStack.
...
remove OpenSim.Framework.UndoStack
2011-07-18 02:06:06 +01:00
3f8e571b78
Use a standard generic system stack for the undo/redo stacks instead of our own homebrew.
...
system stack also uses an array, so no performance penalty.
Also exposes undo count and adds a test assertion for correct undo count after resize
2011-07-18 02:01:12 +01:00
bdd340b9fc
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-07-18 01:35:00 +01:00
e9a739f45f
refactor: group all the undo/redo code in SOP into one place for easier code reading
2011-07-18 01:33:57 +01:00
dd2564d7ec
refactor: Pull up Assembly of the SQLite classes as a protected property, so that it can be overwritten in subclasses. That way extensions can decide in which assembly migration resources should be looked up. This is a refactor similar to commit 9923a2ff10 for MySQL -- no functional changes.
2011-07-16 09:49:38 +02:00
f5ddf37112
Replace ifs in SOG.GroupResize() with Math.Min()
...
Also fiddle a bit with undo. This is not currently working properly, though to be fair it also didn't appear to work in 0.7.1.1 either (at least for resize).
Will get some more attention soon.
2011-07-16 05:23:21 +01:00
9a80adf33a
remove now unncessary parts of SceneObjectGroup.Resize()
2011-07-16 04:49:21 +01:00
122745fe1c
refactor: replace scale limiting code with more elegant Math.Min calls
2011-07-16 04:28:49 +01:00
2b68ac4ba3
refactor: Push all part resize code down into SceneObjectPart.Resize()
2011-07-16 04:22:57 +01:00
4b5a6b655b
add test for resizing one part in a group
2011-07-16 03:52:30 +01:00
df2a59d31b
refactor: make SceneObjectGroup.GroupScale() a property rather than a mehod
2011-07-16 03:30:14 +01:00
0f9882db5b
minor: add a log warning if a sculpt/mesh async asset request returns no data
2011-07-16 03:24:36 +01:00
6f9b855719
refactor: remove pointless sender != null tests, etc, in AssetReceived, since the method called always belongs to the object that generated the request
2011-07-16 03:16:24 +01:00
982e71b6b8
eliminate unused and redundant SceneObjectGroup.AssetReceived()
2011-07-16 03:08:28 +01:00
c82f19e41c
fix build break from last commit
2011-07-16 03:06:30 +01:00
3fc12e7224
Eliminate the pointless textured id argument to SculptTextureCallback
2011-07-16 03:02:28 +01:00
2b339b7d2b
minor: remove mono compiler warnings
2011-07-16 02:56:54 +01:00
27fae36a21
remove the need to supply SceneObjectGroup.GroupResize() with a localId.
...
This is utterly pointless scene we already know which sog we're dealing with.
2011-07-16 02:53:36 +01:00
50bd48542c
Add very basic test for resizing a scene object with one prim
2011-07-16 02:44:00 +01:00
6179879308
minor: remove mono compiler warnings
2011-07-16 01:53:25 +01:00
da7340b9fb
If resized shape is a mesh/sculpt, leave it to the mesh asset callback to trigger the physics actor taint.
...
In the last commit, the fix was made by updating all the child prim physics actors with the new size rather than just the root part.
2011-07-16 01:42:56 +01:00
18652eb87e
Fix physics proxy regeneration when a mesh with more than one submesh is resized
...
Addresses http://opensimulator.org/mantis/view.php?id=5584
2011-07-16 01:36:27 +01:00
7247ca1644
use constants in llGetObjectDetails() rather than magic numbers
2011-07-16 00:08:11 +01:00
a9ba9d4a9e
change async parameter name in AddLocalPacketHandler since it becomes a reserved keyword in .net 5
...
Also adds some method doc.
2011-07-15 23:51:55 +01:00
0ee7a5ee81
If object is an attachment, make llGetVel() return the avatar's speed rather than the object's own zero speed.
...
As per http://opensimulator.org/mantis/view.php?id=5575
2011-07-15 23:36:32 +01:00
3e5b2d52ff
minor: method doc for baked texture uploading
2011-07-15 22:58:29 +01:00
e9dbe54ab1
Fix some local id issues in physics glue
2011-07-15 20:07:59 +01:00
b55076990c
fix duplication of physical objects for physics engines that care about the initial value of localID
2011-07-15 11:37:34 -07:00
c7e8529122
minor: remove whitespace
2011-07-13 01:25:17 +01:00
0d64155bb5
Remove an unused 404 checker since on a 404, GetResponse() throws a WebException rather than proceeding.
2011-07-13 01:24:22 +01:00
938b4f8bf8
if a SynchronousRestObjectRequester request fails, then unless it's due to a 404, log the exception for diagnostic purposes
...
This is instead of logging "Invalid XML" for all failures, even if they weren't a result of invalid xml.
A default TReponse is returned in the event of a 404, which is the same behaviour as previously.
2011-07-13 01:19:12 +01:00
e434ba5e8e
Remove the obsoleted SynchronousRestObjectPoster
2011-07-13 00:52:32 +01:00
08dc07dc76
refactor: Move all callers of the obsoleted SychronousRestObjectPoster.BeginPostObject() to the identical SynchronousRestObjectRequester.MakeRequest()
2011-07-13 00:48:36 +01:00
5158ec0913
Add experimental module to check status of services that the simulator is connected to.
...
Currently disabled.
2011-07-13 00:24:55 +01:00
bf1b8397bb
Add a warning to URI config in GridCommon.ini.example not to add a slash to the end.
...
Tidy up GridCommon.ini.example
2011-07-12 23:35:06 +01:00
3e456163dd
Port implementation of llCastRay() from Aurora.
...
I haven't been able to test this since the viewer won't parse the llCastRay() function. Maybe some activation cap is missing. Could wait until it is activated by default in the viewer.
2011-07-12 22:13:15 +01:00
d31e0a67f7
temporarily fix the build break with building the OdePlugin tests assembly.
...
This needs to be fixed properly.
2011-07-12 03:26:22 +01:00
f75f906e35
minor: remove whitespace to trigger another build
2011-07-12 03:13:05 +01:00
df0e5cc9fe
When a mesh object is added to a scene, delay adding the physics actor until the sculpt data has been added to the shape (possibly via an async asset service request)
...
This prevents spurious 'no asset data' for meshes added on startup.
2011-07-12 02:33:09 +01:00
dbd954d701
Fix permissions problem where newly uploaded meshes rezzed from inventory could not be copied by owner.
2011-07-11 22:56:14 +01:00
24efb021ff
minor Tack the prim name on the end of the "experimental mesh proxy generation" message.
...
Can probably comment out this message soon, once a few other issues are tidied up.
2011-07-11 04:23:30 +01:00
8e44a8e2b9
Properly regenerate physics proxy when a mesh is resized.
...
This is done in SOP.Resize(). More common code from callers needs to be refactored into this method to reduce confusing copy/pasting
2011-07-11 03:47:49 +01:00
0badf3718d
refactor: push the part of SceneObjectGroup.CheckSculptAndLoad() that actually deals with the part into a SceneObjectPart.CheckSculptAndLoad() method
2011-07-11 03:35:29 +01:00
2f3d0e209f
When a sculpt/mesh texture is received by a part on a callback request, don't do the unnecessary work of copying the base shape.
...
Just setting the new base shape is enough to reinsert the sculpt data and set the taint.
Also cleans up a few more left-in debugging messages.
2011-07-11 03:13:59 +01:00
ce85675e70
comment out accidential ProcessTaints physics debug line left in code
2011-07-11 02:29:51 +01:00
6a15464b0a
refactor: Make arguments to SceneGraph.UpdatePrimFlags() more readable
2011-07-11 02:29:19 +01:00
01b98c2e62
refactor: Make arguments for SceneObjectGroup.UpdatePrimFlags() more readable
2011-07-11 02:18:19 +01:00
e68ae44b6b
minor: remove mono compiler warning
2011-07-11 02:11:37 +01:00
c6d4304a04
refactor: very minor space insertion
2011-07-11 02:11:16 +01:00
c964114f7e
refactor: make argument to SOP.UpdatePrimFlags() more readable
2011-07-11 02:09:11 +01:00
457ba9d1a2
refactor: slightly simplify test
2011-07-09 02:27:47 +01:00
59aedbc94b
Rename SceneSetupHelpers.AddRootAgent to AddClient() to better represent its effects and return object
2011-07-09 02:25:40 +01:00
f99b89990c
Add scratch AvatarFactoryModuleTests with one test to do a partial check on AvatarFactoryModule.SetAppearance()
...
Baked texture set not yet checked, nor persistence of data in avatar service
This is a foundation for later npc related tests.
2011-07-09 02:21:56 +01:00
6963b8b046
refactor: Get LSLString(LSLInteger i) constructor to now call LSLString(int i) structure to remove code duplication.
2011-07-09 01:28:27 +01:00
df586c9d25
Raw int numbers (ex.LSL Constants) are displayed like "1.000000" when type cast to string
2011-07-09 01:27:12 +01:00
f680c13495
Fix osMatchString() so that it reports all instance of pattern matches, not just the first one.
...
This is a slight adaptation of the patch in http://opensimulator.org/mantis/view.php?id=4568 which doesn't apply directly since the underlying code was changed by earlier makopoppo patches.
Thanks makopoppo!
2011-07-09 01:24:30 +01:00
52c3671aa0
fix formatting issues from last patch
2011-07-09 01:17:35 +01:00
b983f38e2a
lsGetWindlightScene() returns raw int value, which makes unable to compare to another value with llListFindList()
2011-07-09 01:08:26 +01:00
04f8d0e45d
Made some LSL_Constant or LS_Constant raw int values
2011-07-09 01:08:13 +01:00
e7abf834d1
Instance-types-in-list fix for LSL/OSSL functions. This will fix llListFindList() which always returns -1 when you compare with the list from those functions.
...
*llCSV2List
*llGetAnimationList
*llGetLinkPrimitiveParams
*llGetObjectDetails
*llGetParcelDetails
*llGetParcelPrimOwners
*llGetPrimitiveParams
*GetLinkPrimitiveParamsEx
*osGetAgents
*osMatchString
*osGetLinkPrimitiveParams
*osGetPrimitiveParams
*osGetAvatarList
2011-07-09 00:49:53 +01:00
d79c6c8820
Rename SetSculptData() to SetSculptProperties(), since this is what it does (setting SculptData is done through the property)
2011-07-09 00:42:48 +01:00
5e8900dfd0
minor: code tidy and inserted log lines for future use.
...
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does
After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory
When phantom is toggled, the sculptdata is regenerated before remeshing.
But on resize, the sculptdata is not regenerated.
So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
2011-07-09 00:35:30 +01:00
c3d82bdcb1
When loading library asset set, only store an asset if it's different from an existing one with the same id.
...
We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store.
This cuts asset library load time from 10 seconds to <1 sec.
Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear.
This is unrelated to this commit and needs to be fixed at some subsequent time.
2011-07-08 22:53:19 +01:00
a048ec3f95
stop the local inventory services connector from logging an error when an item id isn't found.
...
making this query is legitimate and so the log line can cause false positivies. It is up to callers to log an error if appropriate.
2011-07-08 22:34:03 +01:00
192bd1057e
fix bug where opening a library script would fail
2011-07-08 22:32:19 +01:00
5700c582ba
refactor: rename bool returning GetAgentInventoryItem() to CanGetAgentInventoryItem() to improve code readability
2011-07-08 22:28:17 +01:00
e8ad8593b6
refactor: eliminate redundant return statement
2011-07-08 20:58:44 +01:00
40300c886c
refactor: Factor out AddSubMesh() method from long CraeteMeshFromPrimMesher() method
...
Also remove some of the logging spam left in from the last commit.
2011-07-08 20:36:01 +01:00
b18ef976ff
Fix interpretation of physics mesh proxies from mesh data
...
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format , some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
2011-07-08 19:43:22 +01:00
29034bc0e0
minor: code tidy up - remove a couple of Console.WriteLine() accidentally added in the last commit
2011-07-08 18:34:44 +01:00
36df9ae79a
refactor: Separate the OdeScene class into its own file from OdePlugin.cs, to improve code readability
2011-07-08 18:16:48 +01:00
1dcad4ac66
minor: commented out log lines for future use and very small code tidy
2011-07-08 17:58:01 +01:00
3bda7711b3
Switch the MeshUploadFlag CAP module on and off with the existing config AllowMeshUpload flag in [Mesh] (in OpenSimDefaults.ini)
...
Default is on.
2011-07-07 23:49:19 +01:00
2fbc98fa5c
Make MeshUploadFlagModule non-shared rather than shared (since each scene needs its own cap)
2011-07-07 23:37:23 +01:00
e91861fff2
Ensure that the max transfer distance is initialized correctly.
2011-07-07 09:12:57 -07:00
281e80ccf3
add MeshUploadFlag capability fixed mesh upload with latest mesh viewer thank you dahlia and lkalif for helping to make this happen!
2011-07-07 03:30:37 -07:00
af8773d6d0
Add TestClearCache()
2011-07-04 23:05:31 +01:00
cb02fc44f5
add TestExpireAsset()
2011-07-04 23:03:05 +01:00
f58de55c84
refactor: Move test setup code into setup method
2011-07-04 22:59:36 +01:00
bebc51a6e0
Make it possible to disable the file part of the flotsam asset cache
...
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
2011-07-04 22:51:47 +01:00
5dc785bbf2
refactor: Split file cache manipulation code into separate methods, as has already been done for the memory cache
2011-07-04 22:30:18 +01:00
46f5893d55
Add basic flotsam asset cache test for retrieved cached asset.
...
Disabled temporarily since file system caching disrupts subsequent test runs
2011-07-04 21:35:15 +01:00
b8e7258051
If a user has the rights to edit a parcel's properties, then also allow them always to enter that parcel.
...
This is patch http://opensimulator.org/mantis/view.php?id=5567
Thanks Snoopy!
2011-07-02 01:14:29 +01:00
bb4cb16512
Add profile, merge, noassets and skip-assets options for loading/saving oars via RemoteAdmin
...
This is http://opensimulator.org/mantis/view.php?id=5453
Thanks Michelle Argus!
2011-07-02 01:05:03 +01:00
513d63455e
Create a very basic initial test which just creates an 'npc' and tests that the scene presence exists
2011-07-02 01:01:40 +01:00
ed12e38480
refactor: simplify existing npc code by creating them directly rather than indirectly via a timer
...
no obvious reason for doing this asynchonously, especially as the caller was sleeping in order to pick up the response anyway!
2011-07-02 00:18:15 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
e765759f50
If OpenSim has been built from a git tree, then include version information automatically by dereferencing .git/HEAD
...
A blank bin/.version file will stop this being displayed.
2011-07-01 22:48:00 +01:00
759e855566
refactor: rename gitCommitFileName to manualVersionFileName since bin/.version doesn't necessary have to be a git hash
2011-07-01 21:47:30 +01:00
e41093635a
fix build break I just introduced
2011-07-01 21:37:03 +01:00
9f72fbcb75
Add an async inventory details sender to respond to FetchInventory packets.
...
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
2011-07-01 21:25:40 +01:00
5c18ebf424
Allow physics proxy generation for meshes using new asset format.
...
Fix an invalid cast exception while decoding new mesh asset format.
2011-06-29 17:36:41 -07:00
c84a1bd99f
Don't follow inventory links of links.
...
This is to avoid problems with corrupt inventories where an inventory link target points back at the source's folder
No viewer has been observed to set these up as of yet. If this ever happens, we will need a more sophisticated solution to track sent folders within the recursion
2011-06-29 01:33:41 +01:00
1b4c08730e
refactor: simplify redundant double containing folder check
2011-06-29 00:56:35 +01:00
3f0b8db0c1
If an inventory link target is in the same folder as the source, then don't recursively request that folder.
...
Currently, this should never actually happen but certainly best to handle this case
2011-06-29 00:54:53 +01:00
22f25fae38
Hack around with the NPC module to get osNpcCreate() partially working again.
...
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
2011-06-29 00:28:22 +01:00
ee92f22f2a
[PATCH 2/2] [FIX] osGetPrimitiveParams() and osSetPrimitiveParams()
...
crashes throwing System.NullReferenceException
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:29 -04:00
80010f8908
[PATCH] osSetSpeed() will accept float number
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
ffa790d69d
[PATCH] Get osGetWindParam() and osSetWindParam() accessible
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
882d5c82b3
[PATCH 1/2] Fixed the function names of some OSSL functions shown as
...
threat-level check error message
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
36e2054760
minor: temporarily comment out the local status notify friends messages seen on login/logout, since it's a bit noisy on the console.
...
Please uncomment if/when this is still needed.
2011-06-27 23:12:54 +01:00
5daac0584a
Fix bug in reset user password where entering an invalid name would cause an exception. Also, convert this commands log output to console output.
...
Console output is more appropriate for console commands. The log only gets one side of the conversation anyway (since it doesn't necessarily record command inputs).
2011-06-25 00:08:14 +01:00
296774495b
Implement "set user level" console command to set the user level (which determines whether a user has a god account)
...
Adapted from Makopoppo's patch in http://opensimulator.org/mantis/view.php?id=5552 . Thanks!
2011-06-25 00:03:34 +01:00
56dcc51094
Add a command "show account <first-name> <last-Name>" to the user account service that will show the given user details
2011-06-24 23:54:37 +01:00
7545692f32
Changed actual default values of 'ServiceConnectorModule' and 'MessagingModule' in [Groups] section in accordance with OpenSim.ini.example descriptions
2011-06-24 22:40:21 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
afb1248e39
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-24 21:57:16 +01:00
1a0a9d2290
Implement the latest mesh mechanism so that rezzing the uploaded mesh now works again.
...
Many thanks to the aurora project for pioneering this.
This code is almost certainly not bug free, but it does at least appear to handle simple meshes (except when the viewer crashes - but it is beta!).
2011-06-24 21:54:01 +01:00
1cad116b1d
Merge branch 'master' of /home/opensim/src/opensim
2011-06-24 16:33:40 -04:00
75199a0d2c
RegionReady Module:
...
Add notification to neighbors when logins are enabled.
2011-06-24 16:20:13 -04:00
37a7c16734
minor: method documentation
2011-06-24 21:01:48 +01:00
de20f0603f
Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
...
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
7819b4a794
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-16 17:15:12 -07:00
409738726d
Added a couple of guards and warnings to the MapImage/MapImageServiceModule.
2011-06-16 17:14:41 -07:00
ad84728aba
Add localID to physical object creation functions.
2011-06-15 11:31:32 -07:00
29da57e380
Add the PhysActor to the correct SOP when duplicating a physical
...
prim. Thanks, MisterBlue
2011-06-15 11:26:45 -07:00
7a4fbdac7c
Added an expiring cache for region information to the
...
RemoteGridService connector. Timeout is currently set at five
minutes. Negative results are not cached.
The result is that operations like send an instant message do
not have to go through the grid service every time.
2011-06-15 11:22:51 -07:00
603dbea190
tweak messages. Make verbose inventory item save message give the item name as well as item id and asset id
2011-06-14 00:51:18 +01:00
822b9e085f
Added SimulatorFeatures capability. Thanks Aurora devs for the bootstrap on the contents of the response.
...
Changed the experimental capability introduced a couple of commits ago: now sending that extra information as part of the response in the SimulatorFeatures cap.
2011-06-13 10:21:29 -07:00
c62ccc75a1
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-13 09:14:17 -07:00
ecb28ae130
V2 map now working in grids too. WARNING: A few visible configuration variables added in order for this to work. See .ini.example changes
2011-06-13 09:13:44 -07:00
ab11835aeb
Same processing of the "/" in the MapImageService Cap as the one in the login service.
2011-06-13 07:59:28 -07:00
0e4db3ca39
Added experimental new capability URL called MapImageService meant to work with Kokua viewer if devs are willing to do it.
2011-06-13 07:56:52 -07:00
dc978d02a7
match water color for warp3d map tiler and adjust lighting
2011-06-13 12:37:43 +01:00
4b9de140ab
Add credit and link to SimianGrid project. Thanks, guys!
2011-06-12 22:25:30 -07:00
95e050130c
People are bound to forget the '/' at the end of MapTileURL, so let's correct that from the inside.
2011-06-12 22:10:16 -07:00
2e77518c6d
bit depth: 24!!! begeez! -- zoom levels work now.
2011-06-12 21:51:26 -07:00
78c16da544
A few bug fixes on map V2. Zoom level weirdness still there.
2011-06-12 17:05:45 -07:00
fd57c91b4a
First pass at making the V2 map work. Standalones only for now. There are some issues with the zoom level -- TBD.
2011-06-12 15:37:42 -07:00
06e254c392
A few more cleanups on the way to close http://opensimulator.org/mantis/view.php?id=5516 once and for all. Moral of the story: don't send AgentOnline/Offline to viewers with a zero-length array.
2011-06-11 17:48:19 -07:00
e1ca77a0db
Only send AgentOnline to the client if the friendsOnline list has elements. Also, increased the timeout on UserAgentServiceConnector, StatusNotification again.
2011-06-11 17:22:35 -07:00
d992779397
Switched order of SQL statements in Friends migration -- resulted in the wrong key
2011-06-11 09:36:57 -07:00
e07d71d298
Added a Sleep in between each site call, to slow the xml-rpc requests down.
2011-06-10 21:17:34 -07:00
5f311c91c7
More tweaking on the UserAgentServiceConnector: add constructor that does not do DNS lookup, and use that for friends notification.
2011-06-10 21:07:50 -07:00
0ae022d688
Decreased timeout of HG StatusNotification to 4secs. http://opensimulator.org/mantis/view.php?id=5516
2011-06-10 20:59:57 -07:00
487cb51f69
3rd way of reseting the HG Map. This time, don't use the grid service; instead keep track of which map blocks each client has seen in the region, and reset exactly those when the client closes.
2011-06-10 17:22:17 -07:00
9a62bfab0e
If the flotsam asset cache console command "fcache clear" is specified on its own, clear both memory and file caches
2011-06-11 00:50:20 +01:00
b13b54c526
Make the internal flotsam asset cache defaults match config-include/FlotsamCache.ini.example. Enable the flotsam console commands even if FlotsamCache.ini isn't present.
...
For the most part, defaults are made to match those already in FlotsamCache.ini.example.
The one exception is that the 48 hour file timeout from the code is used instead of the 0 hours that was in the example file. This can be tweaked if necessary.
Most importantly, the default cache directory is now ./assetcache (as in FlotsamCache.ini.example) rather than ./FlotsamAssetCache (as was the internal code default).
Therefore, if you were using flotasm without using the config file, then please rename your cache directory or start using the ini file and change the default there if you want to keep using your existing cache.
2011-06-11 00:04:21 +01:00
fc7e17baf7
When serializing objects, stop accidentally using the green text colour value for alpha
...
This addresses http://opensimulator.org/mantis/view.php?id=5111
2011-06-10 21:49:25 +01:00
c7bdb66a1f
Added missing "Old Guids=true" to ConnectionString
2011-06-10 21:10:37 +01:00
804fe2d9b0
Save the sun's position in OARs
2011-06-10 20:55:58 +01:00
08db3c5a8e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 20:42:15 +01:00
b5518dc906
minor: Add some commented out destructor logging messages for potential future use.
...
At the moment, client and scene objects are being garbage collected as expected, at least in simple scenarios.
2011-06-10 20:40:14 +01:00
eeac2275c9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 09:17:06 -07:00
98d1e7768a
New method for resetting the map on HG: do it only once upon changing grids, and reset only exactly the map blocks that had regions in them. WARNING: this fetches all the regions from the Grid service, so there is a chance that this is a really bad idea in large grids. Pushing it for testing.
2011-06-10 09:16:43 -07:00
387b228d68
partial update for new mesh asset format - handle both old and new formats for physics mesh
2011-06-10 00:38:38 -07:00
9149ef6c89
For MySQL, migrate region tables to the MyISAM storage engine rather than InnoDB
...
Using MyISAM proves vastly faster for persisting scene objects.
For instance, a scene object that took 9 seconds to persist before now takes 1. This also improves the experience of loading large OARs.
We don't use any of the transactional features of InnoDB.
The only thing that may have an impact is that InnoDB does row locking on inserts while MyISAM does table locking.
However, field reports say there is no noticeable difference.
2011-06-10 02:33:50 +01:00
d780500c58
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 02:29:30 +01:00
2bc8dcfdbd
minor: add method doc to make it clear that click action is fired when the click action is changed, not when a prim is clicked
2011-06-10 02:27:45 +01:00
8d3a8a0a81
The map breakage is actually at 2048!
2011-06-09 16:51:47 -07:00
e3e1f6308d
Change the name of the newest command to "show names" so that it doesn't conflict with the existing "show users"
2011-06-09 16:11:47 -07:00
4cf60c5d9d
Removing special casing on failures. This may also fix reports of this issue:
...
22:07:53 - [USER AGENT CONNECTOR]: remote call to http://hg.osgrid.org:80/ returned an error: Requested method [locate_user] from 127.0.0.1 threw exception: Object reference not set to an instance of an object at OpenSim.Services.HypergridService.UserAgentService.LocateUser (UUID userID) [0x00000] in <filename unknown>:0
2011-06-08 19:51:48 -07:00
49e4e53928
Consistency fix on the last commit.
2011-06-08 16:41:58 -07:00
2a46f756d6
Fixed a compilation problem. Also added a lengthy comment on the Map hack, so that it never goes unnoticed again.
2011-06-08 16:38:25 -07:00
Justin Clark-Casey (justincc)