XEngine listeners to EventManager.OnShutdown which is triggered from base.Close().
Possibly it could listen for the earlier OnSceneShuttingDown instead, but the easier solution right now is to relocate disposal of the physics scene.
This bug has existed since c150320 (Thu Jul 26 15:27:18 2012) and was in 0.7.4
Viewer 3 will discard such a message if the chat message owner does not match the avatar.
We were filling the ownerID with the primID, so this never matched, hence viewer 3 did not see any script error messages.
This commit fills the ownerID in with the prim ownerID so the script owner will receive script error messages.
This does not affect viewer 1 and associated viewers which continue to process script errors as normal.
This is to make it easier to distinguish these exceptions from unexpected OpenSimulator problems internally and in regression tests.
No functional changes.
This introduces a pull stat type in addition to the push stat type.
A pull stat takes a method on construction which knows how to update the stat on request.
In this way, special interfaces for pull stat collection are not necessary.
Even when an avatar is standing still, it's sending in a constant stream of AgentUpdate packets that the client creates new UDPPacketBuffer objects to handle.
This option pools those objects. This reduces memory churn.
Currently off by default. Works but the scope can be expanded.
This is controlled via the "debug lludp start <in|out|all>" and "debug lludp stop <in|out|all>" region console commands.
The command "debug lludp status" will show current status.
I believe UseCircuitCode is sent on EnableSimulator EQ message, rather than EstablishAgentCommunication
At least with LL 3.3.4, EstablishAgentCommunication appears unnecessary in the teleport context -
viewer still requests it though possibly only after TeleportFinish(). However, we will continue to send it.
I think this is more useful right now since it tells us if the viewer requested a seed caps at all in various scenarios (such as when teleporting to a new region).
These were neither being returned or in many places reused.
Getting packets from a pool rather than deallocating and reallocating reduces memory churn which in turn reduces garbage collection time and frequency.
This allows different categories of stats to be shown, with options to list categories or show all stats.
Currently categories are scene and simulator and only a very few stats are currently registered via this mechanism.
This commit also adds percentage stats for packets and blocks reused from the packet pool.
This was stopping http://code.google.com/p/opensimtools/wiki/RemoteAdminPHPClass from working with some methods (e.g. create_user).
However, this casting has been around for at least 2 years so I'm puzzled that it worked in the first place, though it probably is extremely old sample code.
This allows a closed grid to delete asset types other than maptile remotely.
Only operational if AllowRemoteDelete = true also.
Defaults to false - do not enable if anybody other than you can make asset service requests.
This allows us to use a common check for both AssetService and XAssetService.
It also allows future console commands to delete an asset.
As before, deletion of maptile assets is not allowed remotely unless this is explicitly configured.
This is done in the way that one would expect (e.g. moving a folder increments version number on both source and destination parent folders).
This should hopefully improve viewer reuse of its cached inventory information.
Currently MySQL only but will be implement for SQLite/MSSQL if there are no issues.
This is to stop viewer inventory cache version numbers becoming out of sync with grid stored numbers when viewer performs these actions.
If there are no problems with these changes, they will be propogated to SQLite (and MSSQL if that's simple enough).
May also need to do the same on folder store/create/delete and maybe propogate version increments up the folder hierarchy, but that requires investigation.
This is to stop viewer inventory cache version numbers becoming out of sync with grid stored numbers when viewer performs these actions.
If there are no problems with these changes, they will be propogated to SQLite (and MSSQL if that's simple enough).
May also need to do the same on folder store/create/delete and maybe propogate version increments up the folder hierarchy, but that requires investigation.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This was present in the code but not enforced, which led to a memory leak over time as part properties were changed, whether by viewer, script or another source.
This commit enforces that limit, which will soon become configurable.
Regression test for undo limit added
Should help with http://opensimulator.org/mantis/view.php?id=6279
This was accidentally introduced in 4fc0cfb
This commit also consistently removes the AssetXferUploader when the transaction completes, no matter if it completed on asset upload or item operation.
The amount of data being retained was small, since this was clothing/bodypart metadata in the asset rather than textures themselves.
This was only used if none of new item, update item or update task item had been set.
But since all transactions go through these paths this old code is redundant.
This was preventing the previous race condition fix in 4fc0cfb from actually working.
This commit also removes some of the pointless transaction id checks - these conditions are already being enforced in AgentAssetsTransactions.
This is done for consistency and to allow removal or some access methods that increase code complexity.
However, this path has not been used for a long time, not even by LL 1.23 - viewers use caps http upload for this instead
On creating these items, the viewer sends a UDP AssetUploadRequest followed by a CreateInventoryItem.
It was possible for the CreateInventoryItem/UpdateInventoryItem to occasionally outrace the AssetUploadRequest and fail to find an initialized Xfer object, at which point the item create would fail.
So instead we always set up a Xfer object on either the asset or inventory item update request.
This does not introduce a new race because code already exists to delay the item operation until the asset is uploaded if necessary (but this only worked if the xfer object already existed)
This allows you to display details of all objects in a given bounding box.
Values parts of the co-ord can be left out as appropriate (e.g. to get all objects between the ground and z=30.
See "help show object pos" for more details.
This is to resolve previous build break.
This unnecessarily but harmlessly reads and sets the parameter multiple times - scene was doing the same thing.
This should really be happening for all console commands (though many don't).
However, things might get difficult if both a console command and other code invoke the same paths.
This increments a SlowFrames counter if a frame takes over 120% of maximum time.
This commit also introduces a generic OpenSim.Framework.Monitoring.Stat which is available to any code that wants to register a statistic.
This is more granualar than asking objects to create their own reports.
At some point this will supersede earlier IMonitor and IAlert facilities in MonitoringModule which are only available to scene code.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This was present in the code but not enforced, which led to a memory leak over time as part properties were changed, whether by viewer, script or another source.
This commit enforces that limit, which will soon become configurable.
Regression test for undo limit added
Should help with http://opensimulator.org/mantis/view.php?id=6279
This was accidentally introduced in 4fc0cfb
This commit also consistently removes the AssetXferUploader when the transaction completes, no matter if it completed on asset upload or item operation.
The amount of data being retained was small, since this was clothing/bodypart metadata in the asset rather than textures themselves.
This was only used if none of new item, update item or update task item had been set.
But since all transactions go through these paths this old code is redundant.
This was preventing the previous race condition fix in 4fc0cfb from actually working.
This commit also removes some of the pointless transaction id checks - these conditions are already being enforced in AgentAssetsTransactions.
This is done for consistency and to allow removal or some access methods that increase code complexity.
However, this path has not been used for a long time, not even by LL 1.23 - viewers use caps http upload for this instead
On creating these items, the viewer sends a UDP AssetUploadRequest followed by a CreateInventoryItem.
It was possible for the CreateInventoryItem/UpdateInventoryItem to occasionally outrace the AssetUploadRequest and fail to find an initialized Xfer object, at which point the item create would fail.
So instead we always set up a Xfer object on either the asset or inventory item update request.
This does not introduce a new race because code already exists to delay the item operation until the asset is uploaded if necessary (but this only worked if the xfer object already existed)
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
Make AssetServiceConnector return more useful data on failure, such as what DLL it was trying to load
Allow LocalAssetServiceConnector.GetData() to work without a cache present, as works for the other lasc Get* methods.
This is to resolve a problem where an asset marked as local but not temporary but still used in the scene would be removed.
The timed expiry scan no longer tries to refetch assets from the scene that are not currently in the cache - this is not helpful since it just drags a lot of data into the cache that may never be referenced.
This removes the DeepScanBeforePurge option since setting this to false will introduce the above problem. This previously had a default of true.
As far as I know, this was only used by the IBM Rest modules, much of which has been commented out for a very long time now. Other similar code uses HTTP or stream handlers instead.
So commenting this out to reduce code complexity and the need to make this facility consistent with the others where it may not be used anyway.
If this facility is actually being used then please notify me or uncomment it if you are core.
This allows us to associate debug logging messages with the right request.
It also allows us to put a request number on 'long request' logging even if other debug logging is not enabled, which gives us some idea of whether every request is suffering this problem or only some.
This is a separate internal number not associated with any incoming number in the opensim-request-id header, this will be clarified when logging of this incoming request number is re-enabled.
This commit also adds port number to HTTP IN logging to allow us to distinguish between different request numbers on different ports.
This is only printed if debug http level >= 4 and the request didn't take more than the time considered 'long', in which case the existing log message is printed.
This displaces the previous log levels 4 and 5 which are now 5 and 6 respectively.
This is for debugging purposes.
This is controlled via the "debug http" command which can already log incoming requests.
This now gains a mandatory parameter of in, out or all to control what is logged.
Log messages are also shortened and labelled and HTTP IN or HTTP OUT to be consistent with existing UDP PACKET IN and PACKET OUT messages.
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
Make AssetServiceConnector return more useful data on failure, such as what DLL it was trying to load
Allow LocalAssetServiceConnector.GetData() to work without a cache present, as works for the other lasc Get* methods.
This is to resolve a problem where an asset marked as local but not temporary but still used in the scene would be removed.
The timed expiry scan no longer tries to refetch assets from the scene that are not currently in the cache - this is not helpful since it just drags a lot of data into the cache that may never be referenced.
This removes the DeepScanBeforePurge option since setting this to false will introduce the above problem. This previously had a default of true.
Viewer LL 3.3.4 and before sometimes fail to properly redisplay dynamic textures that have a small data length compared to pixel size when pulled from cache.
This appears to happen when the data length is smaller than the estimate discard level 2 size the viewer uses when making this GetTexture request.
This commit works around this by always regenerating dynamic textures that fall below this threshold rather than reusing them if ReuseDynamicTextures = true
This can be controlled by the [Textures] ReuseDynamicLowDataTextures config setting which defaults to false.
This is because recent viewers (3.2.1, 3.3.4) and probably earlier ones using the http GetTexture capability will sometimes make such invalid range requests.
This appears to happen if the viewer's estimate of texture sizes at discard levels > 0 (chiefly 2) exceeds the total texture size.
I believe this does not normally happen but can occur for dynamic textures with are large but mainly blank.
If this happens, returning a RequestedRangeNotSatisfiable will cause the viewer to not render the texture at the final resolution.
However, returning a PartialContent (or OK) even with 0 data will allow the viewer to render the final texture.
If true, this setting reuses dynamically generated textures (i.e. created through osSetDynamicTextureData() and similar OSSL functions) where possible rather than always regenerating them.
This results in much quicker updates viewer-side but may bloat the asset cache (though this is fixable).
Also, sometimes issue have been seen where dynamic textures do not transfer to the viewer properly (permanently blurry).
If this happens and that flag is set then they are not regenerated, the viewer has to clear cache or wait for 24 hours before all cached uuids are invalidated.
CUrrently experimental. Default is false, as before.
Intended for use if there are future issues with mono crashes whilst generate dynamic textures.
This test is triggered via a new test-stress nant target.
Not run by default.
Disabled (status quo) by default.
This flag makes the dynamic texture module reuse cache previously dynamically generated textures given the same input commands and extra params for 24 hours.
This occurs as long as those commands would always generate the same texture (e.g. they do not contain commands to fetch data from the web).
This makes texture changing faster as a viewer-cached texture uuid is sent and may reduce simulator load in regions with generation of lots of dynamic textures.
A downside is that this stops expiry of old temporary dynamic textures from the cache,
Another downside is that a jpeg2000 generation that partially failed is currently not regenerated until restart or after 24 hours.
This prevented more than one additional ordinary folder from being created in the base "My Inventory" user folder.
Added regression test for this case.
Switched tests to use XInventoryService with mostly implemented TestXInventoryDataPlugin rather than InventoryService
Disabled TestLoadIarV0_1SameNameCreator() since this has not been working for a very long time (ever since XInventoryService) started being used
since it doesnt' preserve creator data in the same way as InventoryService did and so effectively lost the OSPAs.
However, nobody noticed/complained about this issue and OSPAs have been superseded by HG like creator information via the --home save oar/iar switch.
This is to accomodate situations where viewers will create more than one 'type' subfolder (e.g. calling cards)
But at the same time to prevent multiple such 'system' folders (those in the base "My Inventory" user folder).
This also makes GetFolderForType() only return a folder in the base "My Inventory" folder, if such a type folder exists
This doesn't affect any core OpenSimulator code since all callers were passing true anyway
But it allows region modules to create objects that are never persisted.
In testing, it appears that if multiple threads dispose of separate GDI+ objects simultaneously,
the native malloc heap can become corrupted, possibly due to a double free(). This may be due to
bugs in the underlying libcairo used by mono's libgdiplus.dll on Linux/OSX. These problems were
seen with both libcario 1.10.2-6.1ubuntu3 and 1.8.10-2ubuntu1. They go away if disposal is perfomed
under lock.
This is to resolve a reported issue in http://opensimulator.org/mantis/view.php?id=6232
Here, the land management module is using OpenSim.Framework.Cache (the only code to currently do so apart from the non-default CoreAssetCache).
This is to allow a second attempt to remove an avatar even if "show connections" shows them as already inactive (i.e. close has already been attempted once).
You should only attempt --force if a normal kick fails.
This is partly for diagnostics as we have seen some connections occasionally remain on lbsa plaza even if they are registered as inactive.
This is not a permanent solution and may not work anyway - the ultimate solution is to stop this problem from happening in the first place.
This was working in 0.7.2 but was accidentally removed from 0.7.3.
The --publish option for "save oar" will now save oars stripped of parcel owner information as well as scene object info.
Please use the --publish option if you want to publish oars that may be later loaded by others to the same grid from which they were saved.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
The bug manifested as follows: a large world was saved. All the assets were found. But for some unknown reason, the timeout timer was restarted. So after 1 minute it closed the Archive Writer, because it didn't receive any more assets during that minute. That caused the OAR to become corrupted because ArchiveWriteRequestExecution.Save() was still running.
The convention is that if an object implements IDiposable() the code must explicitly call Dispose() or call it via the using statement.
This may be particularly important for GDI+ objects since they encapsulate native code entities.
themselves. For that, the physics module simply calls RequestAssetMethod, which
in turn points to Scene.PhysicsRequestAsset. This gives physics access to
the asset system without introducing unwanted knowledge of the scene class.
A deadlock was observed today where NPC removal on a script thread would lock the NPC list and then try to lock the sensor list via scripted attachment removal.
Concurrently, the sensor sweep thread would lock the sensor list and then try to lock the NPC list to check NPC status.
This commit resolves the deadlock by replacing the sensor list on update rather than locking it for the duration of the sweep.
c150320 started explicitly disposing of the physics scene and nulling it out on region shutdown.
However, the update loop may not have yet checked Scene.ShuttingDown, particularly if avatars were not in the scene, causing failure when it tried to lookup time dilation.
This commit moves the setting of m_shuttingDown above the existing 500ms pause to notify avatars that they are being kicked.
This should not affect the few other places that use this flag.
Possibly this was for a feature that was never implemented or was otherwise removed.
Thanks to SignpostMarv for the spot of the warning that shows this parameter was never changed.
and into its own class. The BulletSim data structures track
individual prims as linksets of 1 so most of the prim code is not
different between a linked and unlinked object.
If we copy the asset description then we will only ever replicate the very first description, if there was one, not any subsequent changes.
Thanks to Oren Hurvitz of Kitely for this patch from http://opensimulator.org/mantis/view.php?id=6107
I have adapted it slightly to change the order of arguments (name before description rather than vice-versa) and slightly improve some method doc.
This aims to capture the amount of memory that OpenSim turns over whilst operating a region.
This memory is not lost - apart from leaks it is reclaimed by the garbage collector.
However, the more memory that gets turned over the more work the GC has to do to reclaim it.
This is fired when all regions are ready or when at least one region becomes not ready.
Recently added EventManager.OnRegionReady becomes OnRegionReadyStatusChange to match OnLoginsEnabledStatusChange
There is less justification for this word arrangement (verb after noun) now that command help is categorized.
Also removes "image queues show" in favour of existing alias "show image queues".
justincc's original work. Sample scripts before doing so. Also refactor some
crucial common code and eliminate parameters that were only ever used with
the same constant value.
When linking, detach the no longer used SOG's from backup so they can be
collected. Since their Children collection is never emptied, they prevent
their former SOPs from being collected as well.
Physical linksets are fully functional.
Tweeking of the vehicle code to make it semi-work.
Utilize the new API2 for some setting operations.
Add GetOrientation() API call for proper reporting of children of linksets.
Changes the interface between C# and C++ code so old DLLs won't work!
with an ini configuration parameter.
Correct computation of relative offsets of children in a linkset.
Remove a prim from any link relationship before deleting it.
Minor code flow cleanups.
This same constant will later be used with llGetDetectedType().
This constant has a different name from NPC to avoid possible conflict with future LSL changes.
This constant has a different value to try and avoid unnecessary conflict with future constants that may use the same value.
Using the 'NPC' constant with llSensor() will remain valid but is deprecated.
Giving a large folder from one avatar to another was causing a long delay when handled synchronously, since it took some time to retrieve the necessary data from the inventory service.
Handling this asynchronously instead stops this delay from disrupting all avatars in the scene. This has been shown in OSGrid.
I see no reason for not handling all IM messages asynchronously, just as incoming chat is handled asynchronously, so this has been switched for all instant messages.
Thanks to Nebadon for testing this change out.
Even where checks are being made they aren't enough since they all assume that the Animator they just checked is still there in the next line, which is not necessarily the case without locking.
The memory used is small and these should be GC'd anyway when the SP is released. If this is not happening then the wider problem of old SPs being retained needs to be resolved.
This replaces EventManager.OnLoginsEnabled which only fired when logins were first enabled
and was affected by a bug where it would never fire if the region started with logins disabled.
This saves listeners from having to re-retrieve the scene from their own lists, which won't work anyway if multiple regions with the same name have been allowed
This reverts commit 59a29f5f22.
The original revert was committed by mistake - it turns out this was not the cause of Mantis 6089
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
This appears to be a regression from back in commit db91044 (Mon Aug 22 2011) where we started to send TaskInventoryOffered msg dialog rather than InventoryOffered dialog.
This is probably correct, but failed because the bucket was too large and because we wouldn't have handled the TaskInventoryDeclined option anyway.
This patch handles both of these and make llGiveInventoryList() use TaskInventoryOffered as well
Fixes http://opensimulator.org/mantis/view.php?id=6089
Note, this behaviour appears to be at variance with the ll grid as of Tues 17 July 2012, testing with viewer 3.2.1.
The item name in inventory does not change either at the point of detach or after a relog.
This doesn't seem to make any sense and probably stems from a period when this code was directly involved in attaching objects directly from the scene.
This message is already being sent by InventoryAccessModule code instead.
This was because teleporting to the new region invoked the new session setup code before the agent was removed from the old region, which then invoked the session teardown code.
Now, we only invoke the teardown code if the region ID occupied by the agent being removed is the same as the one registered for the current session.
This may well come back in the future when this subinterface is actually used but it currently isn't and I feel the name was poor.
Everything uses IClientAPI.RemoveEndPoint which also returned the full endpoint rather than just the ip address.
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
Also change to use standard table formatting
"show circuits" and "show connections" console commands are very similar but access different data structures.
The encodings are thread-safe and already used in such a manner in other places.
This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
This is only currently meant for use by regression tests that don't have any issues if XEngine is started up quickly, since no other operations will be occuring simultaneously.
Therefore, this is not yet documented externally.
Justin Clark-Casey (justincc)