8960418e7d
Add regression test for presence crossing between regions on the same simulator.
...
Unlike a much earlier commented out version of this test, this is done in synchronous mode.
2013-03-06 21:37:53 +00:00
a675f7d4c3
Merge branch 'master' into careminster
2013-03-01 23:54:00 +00:00
326634a0b3
BulletSim: more things into the TODO list.
2013-03-01 09:44:39 -08:00
1c740798b4
BulletSim: add parameters, code cleanup around checking and enforcing
...
maximum velocity and angular velocity values for prims.
2013-03-01 09:44:37 -08:00
578174d21c
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/RegionLoader/Web/RegionLoaderWebServer.cs
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs
2013-02-27 18:05:04 +00:00
bf9132e1c7
BulletSim: fix crash around race condition when a mesh asset cannot
...
be fetched.
Update TODO list.
2013-02-26 11:32:01 -08:00
54ee95dd8e
Merge branch 'master' into careminster
2013-02-26 13:34:20 +00:00
2b53f08386
BulletSim: tweeks to make avatar jump work better.
2013-02-25 21:58:00 -08:00
9534d5f929
Merge branch 'master' into careminster
2013-02-22 01:28:54 +00:00
efb5da0aa6
BulletSim: add OutOfBounds logic and some position sanity checking
...
to eliminate some of the "cannot find terrain height" warning messages.
2013-02-21 08:52:11 -08:00
4779f7d7d5
Deleted all AssemblyFileVersion directives
2013-02-19 17:14:55 -08:00
26421294f6
BulletSim: experimental lock axis code using constraints. Not enabled
...
by default. Like more debugging is needed.
2013-02-17 20:13:50 -08:00
1d7276235a
BulletSim: add calls for creating all the different Bullet constraint types.
...
Updated the DLLs and SOs and code for BulletXNA to create the types.
All the detailed control calls are not all in place yet.
2013-02-17 20:13:49 -08:00
885b45b112
BulletSim: rework parameter setting for different types of values
...
(like vectors or quaternions).
2013-02-17 20:13:48 -08:00
e549c2922a
BulletSim: fix physical object appearing to slowly float off when
...
they stop moving.
2013-02-16 19:28:38 -08:00
d0c5e0990b
Merge branch 'master' into careminster
2013-02-13 01:54:06 +00:00
0194a3d890
BulletSim: fix density since the simulator/viewer track density in a
...
funny unit that is 100 times real density (default 1000).
Fix avatar drifting slowly when stationary flying.
Fix for physical prims getting corrected for being under terrain when it was
just its geometric center that was below terrain.
Add PreUpdatePropertyAction allowing plugable modifiction of phys
parameters returned from Bullet.
Fix an exception setting GravityMultiplier on initialization.
Update DLLs and SOs for good measure (no functional change).
2013-02-12 15:52:10 -08:00
fb903ff490
BulletSim: More work on center-of-mass. Remove linksetinfo and rely on simulator to update info.
2013-02-12 15:52:08 -08:00
069e587841
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Data/MySQL/Resources/RegionStore.migrations
2013-02-10 00:17:14 +00:00
4808b8ee38
BulletSim: add parameter to set global contact breaking threshold. Update DLLs and SOs for setting same.
2013-02-08 16:29:52 -08:00
222040f1ec
BulletSim: Change BSCharacter to use new base Density and Friction
...
variables rather than own local varaibles.
2013-02-08 16:29:45 -08:00
1b55a9d81e
BulletSim: fix avatar bobbing or jiggling while stationary flying.
...
Various comments and debugging message mods.
2013-02-08 16:29:40 -08:00
1b203601f4
BulletSim: include the linkage to the layered prim implementation. Separate layers for physical (vs simulator) location displacement and linksets.
2013-02-08 16:29:29 -08:00
2fd184e350
BulletSim: reclass BSPrim into layers so linkset and physical world displacement is implemented as overlay classes rather than if statements scattered about.
2013-02-08 16:29:24 -08:00
12971e73d4
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Asset/FlotsamAssetCache.cs
2013-02-08 23:29:47 +00:00
913965256f
BulletSim: Adapt BulletSim to the newer physical properties. Viewer
...
dialog setting of friction, restitution, ... working.
2013-02-07 17:13:28 -08:00
b545e13184
BulletSim: fix exceptions caused by setting physical properties before the prim body is initialized.
2013-02-07 17:13:27 -08:00
ebb63b55aa
BulletSim: add user setting of friction, density and restitution.
2013-02-07 17:13:27 -08:00
22675e6b14
Add some more code from Avination. This changes physics actor stuff around
...
to work with the new params. Not actually plumbed just yet.
2013-02-07 23:22:00 +00:00
765b0e4382
Rename "Bounce" to "Restitution" in PhysicsActor as well. It appears these
...
values are not even used.
2013-02-07 22:20:17 +01:00
9089757ea2
Revert "Add plumbing for physics properties to get to the physics engine."
...
This reverts commit c658fa1c0d
2013-02-07 21:05:58 +00:00
45f5a6a6db
Merge branch 'master' into careminster
...
Conflicts:
bin/HttpServer_OpenSim.dll
2013-02-07 20:51:51 +00:00
c658fa1c0d
Add plumbing for physics properties to get to the physics engine.
...
Addition of entries to PhysicsActor and setting code in SceneObjectPart.
2013-02-07 11:10:15 -08:00
af73ea909c
Change passed PhysicsParameter value from float to the more general string value
2013-02-07 11:10:14 -08:00
375114bea3
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
2013-02-07 01:40:11 +00:00
d2ece00e68
BulletSim: set removing zero width triangles in meshes to be enabled by default. This should fix the invisible barrier in sculptie doorways bug.
2013-02-06 15:59:59 -08:00
0baa2590be
BulletSim: check for completely degenerate meshes (ones with all
...
triangles having zero width) and output an error rather than
throwing and exception.
2013-02-06 15:52:28 -08:00
67d92e4e16
BulletSim: remove an exception which occurs if a physics mesh
...
asset is not found.
2013-02-06 14:00:27 -08:00
f567ff9f51
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Physics/BulletSPlugin/BSShapeCollection.cs
2013-02-06 02:22:12 +00:00
3646361279
BulletSim: make removing zero width triangles from meshes optional
...
and, for the moment, default to 'off'.
2013-02-05 17:19:55 -08:00
dce9e323f4
BulletSim: remove degenerate triangles from meshes. This fixes the
...
invisible barriers in sculptie doorways (Mantis 6529).
Bump up level-of-detail for physical meshes to 32 (the max). This
fixes the invisible barriers that showed up in prim cut arches.
NOTE: the default LOD values are removed from OpenSimDefaults.ini.
If you don't change your OpenSimDefaults.ini, you will continue
to see the arch problem.
2013-02-05 16:56:33 -08:00
13233da66c
BulletSim: add debugging looking for doorway sculpty problems
2013-02-05 16:56:28 -08:00
ad438ee59f
BulletSim: rework some parameter setting implementation moving functionality that was in BSScene to BSParam. Remove unused parameters that were passed to the unmanaged code. Update DLLs and SOs for the new param block.
2013-02-05 16:56:23 -08:00
2b6d226911
BulletSim: correct angular vertical attraction to properly correct an upside down vehicle.
2013-02-05 16:56:17 -08:00
d3892bbd06
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Data/MySQL/MySQLSimulationData.cs
OpenSim/Framework/Servers/VersionInfo.cs
OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCaps.cs
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
2013-02-05 21:30:12 +00:00
1f1da23097
Bump version and assembly version numbers from 0.7.5 to 0.7.6
...
This is mostly Bluewall's work but I am also bumping the general version number
OpenSimulator 0.7.5 remains in the release candidate stage.
I'm doing this because master is significantly adding things that will not be in 0.7.5
This update should not cause issues with existing external binary DLLs because our DLLs do not have strong names
and so the exact version match requirement is not in force.
2013-02-05 00:23:17 +00:00
7482ad1c22
Merge branch 'master' into careminster
2013-02-04 19:21:39 +00:00
2ff301ca11
Correct spelling mistake in new RayFilterFlags, LSLPhanton -> LSLPhantom
2013-02-02 01:34:49 +00:00
5bb85a14d4
BulletSim: fix problem where editting a physical linkset caused the
...
child prim physical positions to get out of sync with the view.
More reliably compute the offset of children in a physical linkset.
2013-02-01 11:52:27 -08:00
75a05c16c5
BulletSim: fix crash caused when linksets were rebuilt. A problem added
...
when individual child pos/rot changes were implementated a week or so ago.
Remove some passing of inTaintTime flag when it was never false.
2013-01-31 15:56:10 -08:00
ed71c939fc
BulletSim: make sure vehicle physical properties are set when going
...
physical by delaying setting until pre-step time. Change vehicle.Refresh()
to schedule the pre-step setting.
Comments and updating of TODO list.
2013-01-31 15:56:02 -08:00
371449db2f
BulletSim: clean up TargetVelocity implementation by using the default defn in the PhysicsActor base class.
2013-01-31 15:55:53 -08:00
9a4de546fe
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
2013-01-31 02:53:11 +00:00
a61ecee227
BulletSim: fix physics repositioning when under ground to only happen
...
for physical objects. Non-physical objects can go anywhere they want.
2013-01-29 17:04:28 -08:00
47f09ed4c1
BulletSim: enable angular vertical attraction.
...
Increase terrain collision margin to help vehicles from tunneling
into same.
2013-01-28 17:21:13 -08:00
531d0429d1
BulletSim: first unit test: vehicle angular attraction
2013-01-28 17:08:34 -08:00
e9aff0a91d
BulletSim: do not zero an avatar's standing velocity if it is standing
...
on a moving object.
Rearrange pre/post action subscription code to put more in locks.
Add meshmerizer params to BulletSimTestUtil scene creation (and fix line endings).
Rebuilt version of DLLs and SOs with cleaned up code and no profiling for sure.
2013-01-28 15:11:50 -08:00
e4c6a19940
BulletSim: rename 'uint' to 'UInt32' to make clear the type that is passed to unmanaged code.
2013-01-28 15:11:20 -08:00
f6380a3ad3
BulletSim: fix the trimming of colliders so only the top 25 are returned.
2013-01-28 09:02:01 -08:00
b546af9ac2
BulletSim: simplify the initialization of some of the parameters.
...
Disable vertical attraction for vehicles by default (for the moment).
Fix bug where vehicle would go crazy when velocity got above a
certain speed.
2013-01-27 12:50:07 -08:00
26d4596080
BulletSim: reinstate the supression of rotational velocity for vehicles
2013-01-27 12:50:07 -08:00
a345a2feb7
BulletSim: add framework for BulletSim unit tests. No tests yet.
2013-01-27 12:50:06 -08:00
05adf4b30f
BulletSim: disable center-of-mass computation because it does not work yet
2013-01-27 12:50:06 -08:00
80f0a978db
BulletSim: fix compile error from last commit
2013-01-27 12:50:06 -08:00
36f401d850
BulletSim: parameterize the value for gravity reduction for ground vehicles on the ground. Set defaults for vehicle factors to one. Debug logging changes.
2013-01-27 12:50:05 -08:00
ddef8f16e5
BulletSim: first attempt at reporting top colliders
2013-01-27 12:50:05 -08:00
dd08e1fba6
BulletSim: parameterize several vehicle debugging values: physical linear and angular force factors now default to less than 1 (0.2) vehicle friction and restitution now default to low values
2013-01-27 12:50:05 -08:00
c44a8e9f92
BulletSim: finish the post step event for physical object actions. Modify vehicle to use post step event for logging.
2013-01-27 12:50:04 -08:00
e6e6e8ab15
Merge branch 'avination' into careminster
2013-01-27 01:09:07 +00:00
bfac09849f
bug fix: crash when too many collisions on a ode step
2013-01-26 06:12:26 +00:00
e28c042dce
Merge branch 'master' into careminster
2013-01-26 01:56:23 +00:00
5128ae7b86
* This adds llVolumeDetect functionality to the C# implementation of BulletSim.
2013-01-25 20:15:37 -05:00
6a5d088197
BulletSim: reduce the force of gravity on ground vehicles when they
...
are on the ground. Makes them a little more stable.
2013-01-24 16:26:04 -08:00
0b8bf69470
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs
2013-01-25 00:10:32 +00:00
c6e6614a44
Merge branch 'avination' into careminster
2013-01-24 23:25:38 +00:00
a2a32fc844
BulletSim: reduce the zeroing threshold for rotational velocity.
...
Sometimes settling of a vehicle from gravity introduces small
velocities that need to be kept.
2013-01-24 14:36:00 -08:00
591faac3ac
BulletSim: disable CCD (continuious collision detection) and
...
contact processing threshold since the first didn't solve tunneling
problems but used resources and the latter caused instabilities.
2013-01-24 14:35:42 -08:00
2cf29c87bc
BulletSim: zero motion on an object that we pop up because it is
...
below terrain. If the position is being corrected because it is out
of bounds, all other movement rules are out the window.
2013-01-24 14:35:23 -08:00
3ecfddd791
BulletSim: remove exception that can happen when setting physics parameters from the console.
2013-01-24 14:35:05 -08:00
d5b950633d
* Added in the manifold point dept on collision desc. In BulletSim engine BulletXNA.
2013-01-24 07:36:24 -05:00
ba9d6b7337
* Repairs the Object updates, Collision updates, and Child Prim methods making the bulletXNA engine work again.
...
* The only thing that had an issue was when creating a new RigidBody, BulletXNA didn't know the type SimMotionState and the upcast type is unknown in the constructor. Therefore, I had to update the IMotionState with a new method 'SetBody'. All of the duplicated type information has been removed and BulletXNA is not relying on any non-standard types external to the library.
2013-01-24 07:11:32 -05:00
2ce4a758e2
Merge branch 'master' into careminster
2013-01-24 00:27:00 +00:00
be4c8c4931
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2013-01-24 00:25:08 +00:00
1c3d84fe03
BulletSim: pass up and report the real collision penetration.
2013-01-23 16:20:44 -08:00
a7b810ddee
BulletSim: remove setting of vehicle InterpolationRotationalVelocity.
...
This doesn't seem to help the vehicle stability.
Rename vehicle internal variables adding a "V" or "W" so it is clear
when coordinates are vehicle or world relative.
2013-01-23 14:25:42 -08:00
13182904da
BulletSim: small change to center-of-mass computation left out last commit
2013-01-23 14:25:30 -08:00
a5e9c665f0
BulletSim: center-of-gravity linkset changes. Not working yet.
...
Conflicts:
OpenSim/Region/Physics/BulletSPlugin/BSPrim.cs
2013-01-23 14:25:18 -08:00
c1371ab786
BulletSim: working on COM
2013-01-23 14:25:06 -08:00
775fd6f8cc
BulletSim: fix build break introduced by previous commit
2013-01-23 14:24:54 -08:00
a0d460e6bf
BulletSim: remove the unused RestoreBodyDependencies used by linksets
...
and vehicles and clean up code by removing their kludgyness.
2013-01-23 14:24:42 -08:00
c1795ed399
Add the Avination physics raycast glue so Core Physics can implement raycast
2013-01-23 21:03:24 +00:00
c75508ec8d
Fix a type (Suports => Supports). Also put the normal terrain collision check
...
into the physics check patch for now since physics doesn't properly return land for some reason (as tested by Nebadon)
2013-01-23 20:29:05 +01:00
74e04c0f03
Merge branch 'master' of ssh://melanie@3dhosting.de/var/git/careminster into careminster
2013-01-23 02:39:30 +00:00
cc4cfd9fa8
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/Physics/BulletSNPlugin/BSShapeCollection.cs
2013-01-23 02:38:59 +00:00
80b1e32bfa
BulletSim: Tweeks to vehicle motion.
...
Pass through old angular velocity making for smoother transitions.
Remove some old kludges for angular motion (damping and rotvel suppression).
2013-01-21 23:43:24 -08:00
471c477863
BulletSim: allow changing position and rotation of a child of a linkset
...
without rebuilding the whole compound shape. Should make vehicles move
smoother.
2013-01-21 15:58:22 -08:00
3f6698a595
BulletSim: remove unused MaxTaintsToProcessPerStep parameter
2013-01-21 09:19:09 -08:00
52b341e2e2
BulletSim: More aggressive as setting character velocity to zero
...
when should be standing.
Modify angular force routines to be the same pattern as linear force routines.
BulletSim vehicle turning is scaled like SL and is DIFFERENT THAN ODE!!
Fix some bugs in BSMotor dealing with the motor going to zero.
Add a bunch of parameters: MaxLinearVelocity, MaxAngularVelocity,
MaxAddForceMagnitude, VehicleMaxLinearVelocity, VehicleMaxAngularVelocity,
and most of the values are defaulted to values that are larger
than in SL.
Use the new parameters in BSPrim, BSCharacter and BSDynamic.
2013-01-20 23:09:54 -08:00
3c4868f613
BulletSim: fix problem of avatar sliding very slowly occasionally after stopping walking. Consolidate movement tests into the one prestep motion action
2013-01-20 23:09:54 -08:00
2cb1d5240e
BulletSim: small fix making sure terrain height is calculated
...
properly if the vehicle moves during vehicle actions.
2013-01-20 23:09:54 -08:00
3b0df52d10
BulletSim: modify motors to return correction rather than current value
...
to better use them for incremental updates.
Modify prim and character to use the new motors.
Simplify the vehicle linear movement code to just update the velocity
directly or the basic movement.
2013-01-20 23:09:53 -08:00
2c517d792f
This updates prebuild to remove BulletSimN, implements the BulletSim API in BulletSPlugin using the BulletXNA Bullet physics engine. It also updates the BulletXNA library to be compatible with the changes. OpenSimDefaults has been updated to describe how to switch engines and terrain implementations.
2013-01-20 08:18:16 -05:00
6a75949323
* Dumping BulletSimNPlugin in favor of combining the API
2013-01-20 08:07:49 -05:00
82b954b212
* Tweak the BulletSimN API a bit.
2013-01-20 08:06:15 -05:00
2d3a57a002
Merge branch 'avination'
...
Conflicts:
OpenSim/Framework/ThrottleOutPacketType.cs
OpenSim/Region/ClientStack/Linden/UDP/LLClientView.cs
OpenSim/Region/CoreModules/Avatar/Groups/GroupsModule.cs
2013-01-19 21:49:33 +01:00
12efac494a
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Framework/Servers/HttpServer/BaseHttpServer.cs
OpenSim/Framework/Servers/HttpServer/PollServiceRequestManager.cs
OpenSim/Region/Framework/Scenes/Animation/ScenePresenceAnimator.cs
2013-01-19 02:38:04 +00:00
c6b6c94ccb
BulletSim: reduce jitter in avatar velocity when walking or flying.
...
OpenSimulator is VERY sensitive to changes in avatar velocity and
will send an avatar update message when velocity changes more than
0.001m/s. This significantly reduces the number of avatar update messages by
smoothing the avatar velocity returned by Bullet.
2013-01-18 11:39:24 -08:00
482c7b5368
BulletSim: add logic to turn off pre-step actions when object goes
...
non-active. This turns off 'setForce', 'setTorque' and 'moveToTarget'
when the object is selected or made non-physical.
2013-01-18 11:37:36 -08:00
9aad815177
Merge branch 'master' into careminster
2013-01-18 19:35:09 +00:00
75f710f1e7
BulletSim: Add one function that all actors who act on the physical
...
can use to know if the object is currently active.
Code cleaning including use of Util.ClampV function.
2013-01-17 14:47:35 -08:00
206bfe0657
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/OSSL_Api.cs
OpenSim/Region/ScriptEngine/Shared/Instance/Tests/CoopTerminationTests.cs
2013-01-16 17:05:37 +00:00
8ee9daa121
BulletSim: add the editting children in linkset going phantom bug to TODO list.
2013-01-15 21:08:47 -08:00
5d098d8f17
BulletSim: don't modify angular parameters when doing LIMIT_MOTOR_UP.
...
It was a dumb idea to try and do a nose over feature for jumping cars anyway.
Add better logging of native shape creation/reuse so can tell the difference.
2013-01-15 21:08:46 -08:00
61ff79587b
BulletSim: add debugging messages to know when assets for physical
...
objects have been fetched.
Update TODO list with more work.
2013-01-15 21:08:46 -08:00
daef2b8d87
BulletSim: reduce maximum force a script can apply (like in llApplyImpulse)
...
to the documented maximum from the outragious number previously.
2013-01-15 21:08:46 -08:00
70fa41863d
Merge commit 'f54b398540698e6e09022fe77b6405624b532f5c' into careminster
2013-01-16 01:13:14 +00:00
fc5711fa7a
Merge commit '8bf0a9f85dda4b1831630b65620d5c6868196c11' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
2013-01-16 01:11:20 +00:00
021964c6e0
BulletSim: tweeks to improve hover.
2013-01-15 04:24:24 -08:00
181d4c6fcb
BulletSim: temporarily disable banking and direction deflection
...
because the computations are wrong.
Add VehicleTorqueImpulse routines.
2013-01-15 02:58:14 -08:00
0374b2a0b4
BulletSim: fix logic for enabling unmanaged code debug messages.
...
Free pinned memory when physics engine is unloaded.
2013-01-15 02:21:38 -08:00
13778c895a
BulletSim: by default, turn on continuious collision detection (CCD)
...
and enable friction computation caching. Remove dangerous BulletSim
settings from OpenSimDefaults.ini.
2013-01-15 01:44:34 -08:00
4e1ca890c2
BulletSim: fix not moving physical objects below terrain to over terrain.
...
Add locking on register prestep action list preventing potential race conditions.
Little comment and formatting changes.
2013-01-14 15:46:46 -08:00
8bf0a9f85d
BulletSim: disable center-of-mass computation for linksets until debugged. Move physical prim above ground if it is underground. Previously tried to correct by applying and up force but the prim would never go through the ground.
2013-01-14 07:50:58 -08:00
923e5df7ae
Merge branch 'master' into careminster
2013-01-13 13:44:24 +00:00
2028787c0d
prevent potencial invalid refs
2013-01-13 12:25:41 +00:00
459fcd81c9
BulletSim: move center of gravity of linkset to its geometric center.
...
Necessitated allowing simulator and physical position of a body to
get out of sync since Bullet assumes that <0,0,0> is the center of mass.
Update DLLs and SOs for the UpdateChildTransform so positions of
individual prim in a linkset can be implemented.
2013-01-11 16:47:53 -08:00
eacc2561d1
BulletSim: add osGetPhysicsEngineType() LSL function and update
...
the physics engines to return the name that is specified in the INI
file ("physics = XXX") as the type of engine.
This os function is a little different than the others in that it
does not throw an exception of one is not privilaged to use it.
It merely returns an empty string.
2013-01-11 16:47:35 -08:00
93adc4cb66
BulletSim: Add IsSelected attribute to physical objects. Have vehicles check to see if physical before trying to step. Replace vehicle gravity application. Previously relying on Bullet to apply gravity but since vehicles over-ride the velocity calculation, gravity never had a chance to accelerate the body down. Added AddForceImpulse as well as AddForce for those who need to apply immediate velocity updates. Use the impulse to apply the linear motion.
2013-01-11 16:47:20 -08:00
7e58bbaac6
BulletSim: Redo linear function coding so they can better interact. New algorithm for limitMotorUp that relies on going up when not colliding rather than distance from ground. Add parameter for turning on and off embedded source vehicle debugging.
2013-01-11 16:46:53 -08:00
98168edc29
BulletSim: remove double application of buoyancy. Centralize computation of buoyancy. Add motor angular debugging controls.
2013-01-11 16:46:38 -08:00
b592ec265b
BulletSim: fix the 'No recognised physics mesh found ...' error spew by remembering that the last asset fetch failed until the simulator resets the shape parameters.
2013-01-11 16:44:34 -08:00
3a495ccd56
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCaps.cs
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/Plugins/Timer.cs
OpenSim/Region/ScriptEngine/XEngine/XEngine.cs
2013-01-10 01:38:03 +00:00
aecb32b74e
Merge branch 'avination' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2013-01-10 01:25:07 +00:00
df1d7414ad
BulletSim: Fix hover height (boats float at the correct level).
...
Fix problem of vehicles going crazy when backing up.
2013-01-08 16:37:49 -08:00
1603606f1d
BulletSim: improve vehicle angular banking and deflection computation. Rotate angular correction forces to be world relative rather than vehicle relative.
2013-01-07 22:00:50 -08:00
d5066ae678
* DAnger, TEST * change camera plane collision detection. Still bounces on
...
* prim edges due to camera lag
2013-01-08 00:21:09 +00:00
8452c0a870
BulletSim: add function to push avatar up when hitting stairs.
...
It looks like BulletSim and ODE rely on penetration correction to cause
the avatar to move up and thus allowing walking up stairs. Object
penetration was minimized for walking and flying (so one doesn't go
through walls) and this stopped stairs from working. This commit
introduces avatar movement code to check for collisions at the
feet while walking and attempts to raise the avatar for the steps.
Not yet perfect but movement is better.
2013-01-07 16:05:02 -08:00
599dbc3d95
BulletSim: fix exception when re-creating the terrain when loading an OAR file
2013-01-07 16:04:21 -08:00
d2cb2da790
also exclude land
2013-01-07 11:03:36 +00:00
982328b4ed
exclude avatars from unfiltered RaycastWorld
2013-01-07 10:56:30 +00:00
2e5222055f
BulletSim: comments and removing small compile errors introduced in last commit.
2013-01-06 22:56:16 -08:00
9393403253
BulletSim: update DLLs and SOs with better debugging output.
...
Add definition of hand crafted avatar mesh. Not used yet.
Comments and cleanup.
2013-01-06 14:01:15 -08:00
dc6b7bb5c9
don't try to read geom positions outside main ode thread :(
2013-01-06 12:07:16 +00:00
083ac92b34
Merge branch 'avination' into careminster
2013-01-06 10:52:22 +00:00
40955fee2a
Merge branch 'master' into careminster
2013-01-06 10:52:16 +00:00
2eba80a8cd
BulletSim: fix problem where mesh shapes were physically just their bounding box and not the complete mesh. Fill mesh physical objects are back.
2013-01-04 17:06:52 -08:00
48cfc6d089
BulletSim: implement llMoveToTarget by adding PIDActive, etc.
...
Implementation of non-vehicle hover but haven't tested it a lot.
Update TODO list.
2013-01-04 17:06:51 -08:00
d0c7f7f050
BulletSim: add some features to the PID motor to make it more flexible.
2013-01-04 17:06:51 -08:00
613f516007
BulletSim: convert avatar movement from a force to an impulse. Shouldn't
...
change functionality but removes an oddity in computing the force.
2013-01-04 17:06:50 -08:00
2c6b269b6e
BulletSim: add initial implementation of llMoveToTarget and hover height.
...
Not all there yet.
2013-01-04 17:06:50 -08:00
5432180027
BulletSim: reorganize motor code a little to pull together common functions.
...
Add BSFMotor.
2013-01-04 17:06:50 -08:00
44492b3a49
BulletSim: add comments to force and impulse setting functions
...
so it is clear what Bullet is actually doing with the set values.
2013-01-04 17:06:49 -08:00
92a6958b6d
BulletSim: fix problem where pre-step actions would not replaced
...
by new registrations thus causing multiple instances of an action.
2013-01-04 17:06:49 -08:00
2eda385f5e
BulletSim: add ResetBroadphasePool and ResetConstraintSolver diagnostic
...
functions. If values set from console, the functions are called. Looking
for why the collision pools fill up with unnecessary stuff.
2013-01-04 17:06:48 -08:00
c961cfe19e
bug fix, cleanup...
2013-01-03 21:53:21 +00:00
a504704071
i try to fix avatar orientation in some cases..
2013-01-02 21:59:19 +00:00
be6b6bf191
add a lock to CollisionEventsThisFrame
2013-01-02 20:06:57 +00:00
7980a1d849
*TEST* avatar unscripted sit. Some guessing/automation
2013-01-02 19:39:46 +00:00
7943c8d11c
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs
2013-01-02 11:52:37 +00:00
aa236b2020
BulletSim: add parameter to have Bullet output performance statistics
...
every so many frames. Default to off.
2013-01-01 17:27:34 -08:00
b14b65ea95
BulletSim: move selection of the unmanaged Bullet DLL from BSPlugin
...
into the unmanaged Bullet interface class.
2013-01-01 17:27:33 -08:00
9d840fd2ee
BulletSim: move over and port the interface for BulletXNA.
...
Copied BulletSNPlugin.BulletSimAPI to a new
BulletSPlugin.BSAPIXNA.cs and then modifyed the latter to
comply with the BSAPITemplate definition. Not totally debugged
but the code is all there for an INI variable to select either
unmanaged C++ Bullet or the C# version of Bullet.
2013-01-01 17:27:33 -08:00
0662d109c2
BulletSim: fix line endings.
2013-01-01 17:27:33 -08:00
04132d3af4
BulletSim: subclass Bullet[World|Body|Shape|Constraint] for unmanaged
...
to have pointers and managed to have objects.
Initial paste of XNA code. Commented out.
2013-01-01 17:27:32 -08:00
db3b6e8921
BulletSim: remove unused unmanaged memory reference functions from BSAPITemplate.
2012-12-31 19:57:26 -08:00
6988b5ceaf
BulletSim: remove rigid body contruction functions from BSAPITemplate that relied on prebuilt construction info structures.
2012-12-31 19:57:25 -08:00
9396ccc078
BulletSim: eliminate the use of the unmanaged HeightMapInfo structure.
...
Remove all related calls from the unmanaged and BSAPITemplate interfaces.
Update DLLs and SOs to include the version without HeightMapInfo structures.
2012-12-31 19:57:25 -08:00
3d0fc70864
BulletSim: complete movement of BulletSimAPI functions to BSAPITemplate.
...
Update BulletSim DLLs and SOs with simplier step function interface.
2012-12-31 19:57:24 -08:00
c2a7af18b6
BulletSim: nearly complete in conversion from BulletSimAPI to BSAPITemplate. Only initialization and debug fuctions left.
2012-12-31 19:57:23 -08:00
5379d6d112
BulletSim: remove all the debug printing of pointer formatting (.ToString(X)) and replace it with a method on BulletBody, BulletShape, ...
2012-12-31 19:57:22 -08:00
9218748321
BulletSim: another round of conversion: dynamics world and collision object functions.
2012-12-31 19:57:22 -08:00
9fd0e1b080
BulletSim: add the implementation files for the two versions of Bullet:
...
unmanaged (C++) and managed (C#).
2012-12-31 19:57:21 -08:00
48f718f39f
BulletSim: first round of conversion from direct BulletSimAPI interfacing by BulletSim core to using the BulletSimAPITemplate. Physical object creation and destruction first.
2012-12-31 19:57:21 -08:00
203588e3c0
BulletSim: change physical data structures to classes. Add default
...
instantiations for PhysBody and PhysShape when BSPhysObject is created
to account for them being classes and not structures.
Update TODO list.
2012-12-31 19:57:21 -08:00
7e98dfd70b
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2012-12-30 03:43:51 +00:00
28a8949b9f
BulletSim: remove check for small motor movement because, while it
...
did the right thing for stopping (speed reducing to zero), it prevented
movement from starting (speed increasing from zero). Will revisit
when the generalize PID motor is debugged.
2012-12-29 10:19:47 -08:00
0538096fa3
BulletSim: an 'if' to suppress multiple setting of avatar orientation.
...
Looks like the viewer bombards the server with avatar orientation
information (we're talking several hundred a second) when the avatar
is being turned or when walking. This change just reduces the number
of 'set' calls into unmanaged code.
2012-12-29 08:32:57 -08:00
db6c0363f0
BulletSim: tweeking avatar capsule code in an attempt to have
...
asymmetrical avatar capsule work now that rotation is being passed
from the simulator. Turns out the Bullet capsule is just not very
functional: it doesn't scale properly, the implementation only half
does asymmetry and, in general, is hard to work with.
Avatar shape is about what it was before these changes.
Added initial data structures for avatar shape mesh.
2012-12-29 08:03:57 -08:00
7266eeca6e
BulletSim: add 'AvatarAlwaysRunFactor' parameter and use in setTargetVelocity
...
to implement the 'always run' feature.
2012-12-28 12:01:57 -08:00
70e0a86601
BulletSim: fix problem of avatars appearing to walk through walls
...
by moving the movement motor to a pre-step action and out of its
questionable previous home in UpdateProperties.
2012-12-28 11:56:07 -08:00
3ab1bd0403
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2012-12-28 08:32:34 +00:00
1f6aaad0b5
BulletSim: correct collision mask definition for linkset children.
...
Remove unused code. Add comments and TODOs.
2012-12-27 22:12:28 -08:00
422f0fd6ec
BulletSim: fix physical object not interacting with static objects.
...
Another instance of the underlying Bullet doing, ah, helpful things
when items are added to the world.
2012-12-27 22:12:28 -08:00
c1e7539c77
BulletSim: Parameterize nominal frame rate (55) and add parameters to dynamially turn on/off detailed, unmanaged data dumping of prims and vehicles.
2012-12-27 22:12:28 -08:00
7a5f598399
BulletSim: move logic for IsColliding, CollidingGround and CollidingObj from individual sub-classes and up to parent BSPhysObject class.
2012-12-27 22:12:27 -08:00
e57c0e6731
BulletSim: fix buoyancy so it's properly set by a script when an
...
object is selected.
Update TODO list.
2012-12-27 22:12:26 -08:00
7230990679
BulletSim: fix odd code that wasn't really recomputing the mass of a
...
rebuilt linkset. I was burnt by making get/set methods with side
effects. I should know better.
2012-12-27 22:12:26 -08:00
f3baed5827
BulletSim: add physical parameter min/max constants in BSParam. I just don't like raw numbers scattered around the code.
2012-12-27 22:12:25 -08:00
e98e223927
BulletSim: complete applyImpulse function in BSCharacter (like I said
...
I did last time).
2012-12-27 22:12:25 -08:00
258588d5b5
Merge branch 'master' into careminster
2012-12-26 01:16:08 +00:00
bbc5a5089f
BulletSim: Rename some of the interface structures (BulletWorld, ...)
...
to get ready for...
Start creation of BulletAPITemplate. This defines the abstract interface
functions. Following commits will move over to the new interface.
This will enable switching between the managed and unmanaged version of
Bullet.
2012-12-24 20:18:06 -08:00
4759a8acee
BulletSim: Default avatar density changed to 3.5 which is WAY closer
...
to the SL value.
Fixed frictin values for physical materials which were just wrong
which caused things that should have slipped to not.
2012-12-24 20:16:10 -08:00
80cee1b85a
BulletSim: Fix single physical prim reporting its mass as zero.
...
Properly return root mass as mass of just the root prim rather
than the mass of the linkset. SOG has the logic to add the masses
together to get the linkset mass.
Update TODO list.
2012-12-24 08:56:02 -08:00
9318870607
* Update BulletSimN terrain implementation to default to Heightfield, it's less CPU intensive.
2012-12-23 16:17:18 -05:00
92e4f9f412
* Initial commit of BulletSimN (BulletSNPlugin). Purely C# implementation of BulletSim. This is designed to be /as close as possible/ to the BulletSim plugin while still being entirely in the managed space to make keeping it up to date easy as possible (no thinking work). This implementation is /slower/ then the c++ version just because it's fully managed, so it's not appropriate for huge sims, but it will run small ones OK. At the moment, it supports all known features of BulletSim. Think of it like.. POS but everything works. To use this plugin, set the physics plugin to BulletSimN.
2012-12-23 15:21:25 -05:00
6eeb4cb3f7
Revert "Whitespace change to trigger ircbot"
...
This reverts commit ca30559b05
2012-12-23 18:10:34 +00:00
ca30559b05
Whitespace change to trigger ircbot
2012-12-23 18:07:32 +00:00
a126097d6b
Merge branch 'master' into careminster
2012-12-23 18:05:17 +00:00
30807b81cc
BulletSim: modify avatar motor code to make falling movement better. Clean up some usages. Disable motor when done.
2012-12-22 17:09:40 -08:00
144322a7c9
BulletSim: remove post step one-time taints (doesn't make any sense). Rename pre and post step event invocation routines to Trigger* to be consistant. Remove old, unused code.
2012-12-22 17:07:52 -08:00
16e49035f7
BulletSim: add Enabled parameter and operation to motors.
2012-12-22 17:06:13 -08:00
5b2cbc0ae6
BulletSim: remove all special vehicle code from BSScene. Replace per-frame updates for vehicles with per-frame action registration. One fewer special case.
2012-12-21 23:24:31 -08:00
a54392d7cc
BulletSim: remove the movement decay while flying. Made flying slow down over time.
2012-12-21 23:05:05 -08:00
37fb691ba5
BulletSim: Fix llApplyImpulse so it works after the first impulse. The problem was Bullet deactivating the object between the pushes (when, as far as the physics engine is concerned, it isn't moving).
2012-12-21 23:03:27 -08:00
3d659fe97d
BulletSim: add BSPhysObject code to manage registrations of preStep events. Use same to implement setForce and setTorque so the values are restored at the beginning of each step (since Bullet zeros forces applied last step). Simplify implementation of AddForce and AddTorque by relying on the addition of forces in Bullet.
2012-12-21 17:27:53 -08:00
6dbf9c8ed4
BulletSim: repair vehicle problems introduced in previous 'improvements'. Fix line endings in BSParams.
2012-12-21 15:21:32 -08:00
569f39e124
Merge branch 'master' into careminster
2012-12-21 22:13:41 +00:00
ae4d932e7f
BulletSim: Move all the parameter variables, tables and get and fetch logic to a separate, static class for easier addition and to remove all that bulk from the BSScene class.
2012-12-21 13:35:44 -08:00
2e3e95e846
BulletSim: small fix to avatar movement motor use which keeps avatar from flying up forever. This doesn't fix the overall problem but keeps avatar flying from being totally unusable.
2012-12-21 10:04:12 -08:00
8c99f63239
BulletSim: avatar movement smoothed with motor that modifies avatar velocity to target velocity. Fails in incorporating physical world effects (gravity) so avatar doesn't fly correctly.
2012-12-21 10:00:03 -08:00
b4f8a05e9a
BulletSim: Better detail logging of VMotor actions.
2012-12-21 09:56:31 -08:00
750492796d
BulletSim: begin movement of parameters from pinned memory block to variables all in managed code. Add note to TODO list to remember to do the rest. Other updates to TODO list.
2012-12-21 09:55:20 -08:00
9d2f569d60
BulletSim: fix incorrectly defined property changed flag.
2012-12-20 16:06:52 -08:00
e522bdb96a
BulletSim: Check for unspecified TimeScale in BSVMotor and don't scale if not specified. Add test dump routine. Don'e zero current and target values when error goes to zero as the values could be used externally to store the actual target values, etc.
2012-12-20 16:05:33 -08:00
a5b2539cf9
BulletSim: replace use of funky nullable values for vehicle property update control (m_known* stuff). Bitmaps will be quicker to test and to clear.
2012-12-20 10:32:33 -08:00
e73dac4deb
BulletSim: angularMotorUp working again (seems a little slow as it takes longer than timescale to correct, but getting better). Disabled angularDeflection (need to resolve interactions between angular corrections). Update TODO list.
2012-12-20 10:19:16 -08:00
b7ad44e3a6
BulletSim: reorganize motor step code to separate error computation allowing subclass for PID error correction.
2012-12-20 08:35:36 -08:00
a9b9c0f035
BulletSim: improve angularVerticalAttraction calculation to compute angular correction velocity rather than estimating correction (excuse to use trig functions).
2012-12-18 23:05:59 -08:00
7b84bcfbb8
BulletSim: initial implementation of a PID motor. Not hooked up yet.
2012-12-18 22:59:59 -08:00
cf89e29ac3
BulletSim: comments and TODO list update
2012-12-18 19:25:51 -08:00
29cdf0f3dd
* Merges BulletSim Updates to BulletSimN(BulletSNPlugin)
2012-12-18 15:00:10 -05:00
225b564573
BulletSim: scale the force for external AddForce by the simulation
...
step time so it will be applied completely the next step. The internal
AddForce routine does not scale the force.
2012-12-26 10:25:50 -08:00
d1ede1df3a
BulletSim: make llBuoyancy work. For some reason, Bullet resets an
...
object's individual gravity to the world gravity when the object
is added to the physical world.
2012-12-25 23:55:25 -08:00
5f71ee57c4
BulletSim: stop avatar from sliding VERY slowly after walking by
...
only zeroing the movement motor in the UpdateProperties routine.
2012-12-25 23:54:10 -08:00
79bdf464d3
Merge branch 'avination' into careminster
2012-12-18 09:48:12 +00:00
caea7601cb
Merge branch 'master' into careminster
2012-12-18 09:45:40 +00:00
b9939a46a1
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectGroup.cs
2012-12-18 09:44:10 +00:00
ed9cb18cf0
missing file
2012-12-18 00:54:40 +00:00
f87af983f3
fix
2012-12-18 00:50:36 +00:00
9089bc7e37
some clean up/fix
2012-12-17 22:11:29 +00:00
8653ea93b2
BulletSim: apply friction to linear and angular motion before returning advanced motor value. This seems to be the problem with BulletSim vehicles turning too quickly. Also removed the configuration parameter that controlled the timestep scaling kludge for angular velocity that was added to research the question of quick turning.
2012-12-17 13:51:39 -08:00
11532a4390
BulletSim: fix vehicles going underground when unsat. Problem was that, when doing unsit, the order of operations on the prims and the vehicle is very chaotic and not in a good order so the root prim was being left physical and thus it fell for a bit. Also changed default of velocity scaling to be closer to the movement standard.
2012-12-17 13:22:04 -08:00
021623a17d
BulletSim: fix vehicles being shot in the air at border crossings because of mis-application of correction to postion for below groundness.
2012-12-16 22:31:22 -08:00
2b8efa24dd
BulletSim: add parameter to UpdateProperties call into the linkset so changes from the physics engine can be differentiated from changes made by the user. This eliminates a linkset rebuild loop. Also add logic to not rebuild or freak out when the object/linkset crosses a terrain boundry.
2012-12-16 21:19:13 -08:00
3f2aaffd4d
BulletSim: add even more to the TODO list.
2012-12-16 21:19:13 -08:00
7ed860d3ac
BulletSim: add check for border crossing in character position sanity check.
2012-12-16 21:19:12 -08:00
4cbc5082ff
BulletSim: refactor to combine common terrain height testing code. Add function to test if a position is over known terrain.
2012-12-16 21:19:12 -08:00
f3b1efd889
BulletSim: remove some errors on shutdown by moving terrain destruction until after physical object destruction. TerrainManager also made disposable and that feature used.
2012-12-16 21:19:11 -08:00
ace1f1e931
BulletSim: rip out old code for linkset child position fetching. BulletSim doesn't need to do that bookkeeping because SOG/SOP already does it.
2012-12-16 21:19:10 -08:00
9d1a6558d9
*TESTP unscripted sit: missing files
2012-12-17 01:43:16 +00:00
d003aa2e7b
* TEST * unscripted sit
2012-12-17 01:40:48 +00:00
0a876a305c
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneObjectPart.cs
OpenSim/Region/ScriptEngine/Shared/Instance/ScriptInstance.cs
2012-12-16 21:19:30 +00:00
664dad53dd
BulletSim: Add more to the TODO list. Clean up and improve some comments.
2012-12-13 23:08:01 -08:00
469c6c000a
Return the last set targetVelocity rather than the current velocity as the default action made available in PhysicsActor.TargetVelocity. Doesn't change any physics operation but makes DSG work better as the targetVelocity value does not keep moving around.
2012-12-13 16:32:25 -08:00
31d3952477
BulletSim: fix problem with continuious rebuilding of physical linksets. This caused movement problems and large prim vehicles to take up a LOT of simulation time.
2012-12-13 16:32:19 -08:00
60950bfab5
BulletSim: correct line endings in new BulletSimData.cs file.
2012-12-13 16:32:12 -08:00
3b2b785a46
BulletSim: Add 'BulletSimData' which separates structures created
...
for the operation of BulletSim and those defintiions/structures defined
so they can be used in the unmanaged world.
Consolidate setting of collision flags so implementation is not scattered.
2012-12-13 16:32:06 -08:00
9e0dd9952b
BulletSim: remove extra linkset rebuilds.
2012-12-13 16:32:00 -08:00
e1814aa827
BulletSim: fix problem of avatar's floating off the ground after unsitting. Reworked size/scale logic so physical scale is kept in Bullet and physObject scale is the preferred size -- usually same as size but avatars are computed differently.
2012-12-12 16:51:43 -08:00
6f1f7f0206
BulletSim: non-functional commenting and reorganization of material attribute specifications.
2012-12-12 16:51:36 -08:00
7bb5613dc6
BulletSim: updates and rearrangement of the TODO list.
2012-12-12 16:51:29 -08:00
bb6eeb5429
BulletSim: do not return the current velocity for targetVelocity.
2012-12-12 11:01:36 -08:00
71fc9f29f9
make ubitODE ignore X and Y rotation components on avatar rotations
2012-12-11 22:53:24 +00:00
a082ce9da7
BulletSim: fix crash caused by the creation of a linkset child that is under the terrain. Users can sure find some interesting corner conditions.
2012-12-11 14:27:09 -08:00
d4e0e98c00
BulletSim: protect character property setting to remove crash from taints setting properties after the destroy character taint.
2012-12-11 13:54:26 -08:00
63099184db
BulletSim: protect prim property setting to remove crash from taints setting properties after the destroy object taint has happened.
2012-12-11 13:42:23 -08:00
f35e3c6fe0
changes on the fast speed avatars collider, collisions from above, etc
2012-12-11 19:38:44 +00:00
28ea08c3e2
fix let other phys plugins work.. broken when added feetOffset
2012-12-11 17:14:32 +00:00
905d7c43ad
BulletSim: modify LIMIT_MOTOR_UP to limit BOAT types to be at water rather than ground level. This makes boats float at water level better but not perfectly. There probably needs to be some interaction between HOVER and LIMIT_MOTOR_UP.
2012-12-11 00:35:16 -08:00
8b861e880a
BulletSim: add ini file and command line parameters to control
...
dumping of physical vehicle parameters (out of Bullet) on each
simulation step and to optionally scale vehicle angular velocity
by the time step. The latter looks to be part of a difference
between angular parameters for ODE and BulletSim. SL docs say
angular velocity is measured in radians/timeScale. Not sure if this
is different than what ODE does.
2012-12-11 00:13:13 -08:00
ebf30e7ba6
BulletSim: set mass for single prim linksets when going physical. This fixes single prim vehicles not working (the surf board now zooms).
2012-12-11 00:02:20 -08:00
9a253c7c04
missing files remove some warnings...
2012-12-11 04:49:14 +00:00
420015b7d0
missing file
2012-12-11 04:47:40 +00:00
80639ace95
a few more changes on avatar collider
2012-12-11 04:36:27 +00:00
93393fb975
BulletSim: comment out some chatty debug logging. Rearrange some code in BSDynamics to make velocity vs force calculation clearer.
2012-12-10 16:46:12 -08:00
9df85eadf4
BulletSim: Fix crash on the destruction of physical linksets.
...
While fixing the above, add methods to physical body and shape pointer
wrapper so routines won't have to know that IntPtr.Zero means no
physical instance.
Fix problem with physical linksets failing after a few sits and
unsits by properly restoring child prom positions for compound
linksets after multiple selection and deselections.
2012-12-10 15:35:53 -08:00
a19896cc56
BulletSim: some comments about rebuilding linksets (having to recompute and restore a child's position in the world based on its position in the moved linkset).
2012-12-09 22:32:46 -08:00
ce5083a504
BulletSim: adjust friction and restitution based on material type.
2012-12-09 22:32:46 -08:00
f30d519bcc
Merge branch 'master' into careminster
2012-12-09 21:27:32 +00:00
04e64d73df
BulletSim: set material properties for static objects. Move Linkset.MakeStatic() after call to ForceActivationState2() since linkset might change activation state. Make BSPrim.CreateGeomAndObject public as linkset rebuilding might need access to it. Only rebuild prim if selection state is actually changes -- OpenSimulator calls PhysObject.Selected() multiple times whenever a prim is selected or deselected.
2012-12-08 09:14:40 -08:00
216c121935
BulletSim: fix small problem with setting size/scale of native shapes which caused the native shapes to be rebuilt when not necessary.
2012-12-08 09:14:34 -08:00
addb791f3d
BulletSim: update comments and add more to TODO list.
2012-12-08 09:14:28 -08:00
2ea0dc55d7
create a new ode character also with the new information
2012-12-07 20:06:35 +00:00
d2499c4c31
*TEST* Use new avatar size in ubitODE.
2012-12-07 15:54:46 +00:00
2cb824d3fc
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/InstantMessage/MessageTransferModule.cs
OpenSim/Region/Framework/Scenes/Scene.cs
2012-12-07 03:49:04 +00:00
7fd8202ae3
BulletSim: rewrite and improve vehicle angularDeflection, verticalAttraction,
...
linearMotorUp and related vehicle forces.
Fixed problems with downward vehicle position correction forces being too large.
Add vehicle collision flag so can sense whether vehicle is on the ground.
2012-12-06 09:31:12 -08:00
edd1b353a5
BulletSim: update and add to the TODO list.
2012-12-06 09:31:05 -08:00
18fe35906d
BulletSim: add detail logging detail flag so I don't have to comment and uncomment the detail logging when changing the depth of logged info.
2012-12-06 09:30:57 -08:00
cc59e3cbdf
BulletSim: only check position sanity if the prim is physical -- the user can do anything dumb they wish.
2012-12-06 09:30:50 -08:00
2ecd8e6720
BulletSim: add values for material friction and restitution. Fix line endings in material definition file.
2012-12-06 09:30:42 -08:00
6d7f66f781
BulletSim: Don't add gravity to down force -- let Bullet do that. Add VehicleAddForce to set of managed vehicle prim properties.
2012-12-06 09:30:35 -08:00
e599a8b242
BulletSim: Vehicle angular vertical attraction works. Other vehicle angular forces commented out for the moment for debugging.
2012-12-06 09:30:28 -08:00
de3180a63e
avatar collision plane send to viewer is only relative to feet. change
...
avatar collider, just rounding the boxes, etc
2012-12-05 23:19:18 +00:00
5837e731bf
Merge branch 'master' into careminster
...
Conflicts:
OpenSim/Region/CoreModules/Avatar/InstantMessage/OfflineMessageModule.cs
2012-12-04 23:01:18 +00:00
b6d29aa124
move characters (avatars) to own collision space, also fixing a problem
...
with previus code that was still assuming the avatar is g2
2012-12-04 02:46:40 +00:00
fc1be7e41f
raise standing avatar a bit to reduce knees bending on some collisions.
...
reduce head size a bit
2012-12-04 01:54:37 +00:00
787636b97a
BulletSim: Reduce idle region physics overhead where there are MANY
...
static objects by more restrictive selection of objects that collide
with static objects.
Rename collision mask fuctions from 'filter' to 'group' so it is clear
what is being set.
Rename BulletSimAPI.SetCollisionFilterMask() to SetCollisionGroupMask to match above.
Restore passing of time step to linear and angular motion component routines.
Use buffering vehicle physical parameter get/set routines consistantly.
Make range enforcement clearer by using ClampInRange() function for parameter setting.
Remove commented out experimental vehicle calculations.
2012-12-03 16:25:51 -08:00
b7c3a4fa7f
Merge branch 'avination' into ubitwork
2012-12-03 19:46:16 +01:00
8aa5fdb6a3
*TEST* diferent avatar collider
2012-12-03 19:45:45 +01:00
f21d990820
fix vertex rounding direction
2012-12-03 19:41:29 +01:00
aa00308b10
*TEST* reduce all mesh vertices resolution to 1e-5. This reduces number
...
of unique vertices only originated by math errors in PrimMesher
2012-12-03 19:41:21 +01:00
c50fda8bf5
adjust avatar standing Z position
2012-12-03 19:41:14 +01:00
41f1c5b7f7
BulletSim: rework angular corrections to remove any hybrid code and compute absolute collections.
2012-12-03 07:59:56 -08:00
2586bab2dd
BulletSim: add stubs for generalization of preStep actions. Will eventually replace the specialized vehicle processing with preStep event processing. Add TODO comments about this feature. Redo line endings in TODO file to be all Linux.
2012-12-03 07:59:52 -08:00
dc0497c1b8
BulletSim: begin tracking a TODO list. There just are so many things to remember to do.
2012-12-03 07:59:49 -08:00
10fcc70b36
BulletSim: revert angular vertical attraction from motor to code. The motor code did not return the restoring difference but the current value. Remove unused commented out code.
2012-12-03 07:59:46 -08:00
f9fed421fe
BulletSim: format vehicle detail logging messages so vehicle changs are grouped better in the log output.
2012-12-03 07:59:42 -08:00
20c3ec7d92
BulletSim: localize vehicle property setting so the vehicle prim is only updated at the end of the vehicle simulation step and the push of the physics property update event only happens if the properties are actually changed.
2012-12-03 07:59:39 -08:00
b124aae05e
BulletSim: Add DumpActivationInfo2 function. Change static objects from DISABLE_SIMULATION to ISLAND_SLEEPING. Update DLLs and SOs to add DumpActivationInfo2 function.
2012-12-01 15:39:13 -08:00
ec63e4ff29
BulletSim: remove time scaling of computed vehicle absolute velocity since Bullet will scale the movement by the time slice. Restore LIMIT_MOTOR_UP to definitition of BOAT simce some vehicle engines use it even for land vehicles. Push vehicle parameter updates through the regular property update to solve vehicles floating off when they should be stopped.
2012-11-29 22:21:45 -08:00
Justin Clark-Casey (justincc)