This is not as useful as it sounds, since you can only request rebakes for texture IDs already received.
In other words, if the viewer has never sent the server this information (which happens quite often) then it will have no effect.
Nonetheless, this is useful for diagnostic/debugging purposes.
Further filters "debug packet <level>" to exclused [Request]ObjectPropertiesFamily if level is below 25.
Adjust some method doc
Minor changes to some logging messages.
This is handled by treating UUID.Zero as a special case.
Currently, asking for the "none" group returns nothing because XMLRPC groups, at least, is not properly handling this case.
It may be better in the future to have GroupsModule return an appropriate GroupsData structure instead or require the underlying services to behave appropriately.
This is a further component of http://opensimulator.org/mantis/view.php?id=5588
There were two problems here:
1) On object group update, we looked for the group is the IClientAPI group cache rather than in the groups service. This fails to groups created newly in that session
2) On object group update, we weren't setting the HasGroupChanged flag. This meant that the change was not persisted unless some other action set this flag.
This commit fixes these issues and hopefully addresses http://opensimulator.org/mantis/view.php?id=5588
This commit also moves HandleObjectGroupUpdate() to the GroupsModule from the Scene.PacketHandlers.cs file
This means that avatar/appearance data of other avatars and scene objects for a client will be sent after the ack rather than possibly before.
This may stop some avatars appearing grey on login.
This introduces a new OpenSim.Framework.ISceneAgent to accompany the existing OpenSim.Framework.ISceneObject and ISceneEntity
This allows IClientAPI to handle this as it can't reference OpenSim.Region.Framework.Interfaces
This is required for the substitution of different HTTP servers or the newer HttpServer.dll without having to commit to a particular implementation.
This is also required to write regression tests that involve the HTTP layer.
If you need to recompile, all you need to do is replace OSHttpRequest/OSHttpResponse references with IOSHttpRequest/IOSHttpResponse.
Curiously, a Vector3.ToString() will not display the last two places of the float. In this case, the failure of
the assertion would confusingly report Expected: <0, 0, 0.8454993> But was: <0, 0, 0.8454993> when actual Z figure is 0.845499337
Should fully address http://opensimulator.org/mantis/view.php?id=5779
This is to partially address http://opensimulator.org/mantis/view.php?id=5769
We don't need to call SP.HandleAgentSit() again if we are within 10m since the autopilot won't trigger.
By calling it twice, the position of the sitting NPC was wrongly adjusted, ending up near <0,0,0>.
However, this change does mean that NPCs further than 10m away will not attempt to autopilot to the prim, though this code was broken anyway (is actually a different mechanism to normal NPC movmeent).
Hopefully this can be addressed soon.
from previous commit which sort out which iterator is used are left
intact. A discussion is needed as to what constitutes an avatar vs a
ScenePresence.
the 3 iteration functions so more of them are using the correct
iteration for the action they are performing. The 3 iterators that seem
to fit all actions within OpenSim at this time are:
ForEachAvatar: Perform an action on all avatars (root presences)
ForEachClient: Perform an action on all clients (root or child clients)
ForEachRootClient: Perform an action on all clients that have an avatar
There are still a dozen places or so calling the old
ForEachScenePresence that will take a little more refactoring to
eliminate.
This is necessary so that code in HttpServer can use framework facilities such as the thread watchdog for monitoring purposes.
Doing this shuffle meant that MainServer was moved into OpenSim/Framework/Servers
Also had to make OpenSim.Framework.Console rely on OpenSim.Framework rather than the other way around since it in turn relies on HttpServer
MainConsole and some new interfaces had to be moved into OpenSim/Framework to allow this. This can be reverted if parts of OpenSim.Framework stop relying on console presence (cheifly RegionInfo)
Format is osNpcSit(<npc-uuid>, <target-uuid>, OS_NPC_SIT_IMMEDIATE)
e.g. osNpcSit(npc, llGetKey(), OS_NPC_SIT_IMMEDIATE);
At the moment, sit only succeeds if the part has a sit target set.
NPC immediately sits on the target even if miles away - they do not walk up to it.
This method is in development - it may change so please don't trust it yet.
Standing will follow shortly since that's kind of important once you're sitting :)
I thought that I had implemented this but must have accidentally removed it.
Adds a regression test to detect if this happens again.
Temporarily disables automatic landing of NPC at a target. Will be fixed presently.
This stops the npc walking backwards if the target is directly behind.
This means that the npc no longer returns to its original rotation once movement has finished.
If you want this behaviour, please store and reset the original rotation after movement.
This is somewhat to address http://opensimulator.org/mantis/view.php?id=5678
It's never possible for SOG to have no RootPart, except in the first few picosends of the big bang when it's pulled from region persistence or deserialized
The approach here, as in other parts of OpenSim, is to return a copy of the list rather than the attachments list itself
This prevents callers from forgetting to lock the list when they read it, as was happening in various parts of the codebase.
It also improves liveness.
This might improve attachment anomolies when performing region crossings.
This meant punching in another AddUser() method in IUserManagement to do a direct name to UUID associated without the account check (since NPCs don't have accounts).
May address http://opensimulator.org/mantis/view.php?id=5645
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
Default for this function is now not to automatically land.
This allows better control by scripts when an avatar is going to be landing on a prim rather than the ground.
Stopping the avatar involves faking a collision, to avoid the pid controller making it overshoot.
A better approach would be to gradually slow the avatar as we near the target
this is to allow walking on prims. it will be up to the script writer to be sure that there is a continuous path.
currently implemented in osNpcMoveToTarget(), but none of this is final.
This works by serializing and deserializing NPC AvatarAppearance to a notecard in the prim inventory and making the required baked textures permanent.
By using notecards, we avoid lots of awkward, technical and user-unfriendly issues concerning retaining asset references and creating a new asset type.
Notecards also allow different appearances to be swapped and manipulated easily.
This also allows stored NPC appearances to work transparently with OARs/IARs since the UUID scan will pick up and store the necessary references from the notecard text.
This works in my basic test but is not at all ready for user use or bug reporting yet.
This doesn't help where the target is a prim surface. In these situations, it might be better to provide manual overrides so the script can control whethre an avatar flys there/lands, etc.
This makes the movement exact. Regression test changed to check avatar reaches exact target.
Also has the nice side effect of making NPC animations continue to work after the first movement (which wasn't working). However, avatar still pauses in mid-stride
Avatar moves and stops. However, will stop in mid stride.
And if the move to position is in the air, avatar will continue to make vain and quite hilarious attempts to take off (but never doing so).
Clearly more work is needed.
This now works again except that it requires a click or avatar mvmt to get going
This is because the ScenePresence.HandleAgentUpdate() method doesn't trigger until the client does something significant, at which point autopilot takes over.
Even clicking is enough to trigger.
This will be improved presently.
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
this is a prerequisite to fixing llDialog issues for the latest Linden viewers, since they are now making use of a new OwnerData field in the ScriptDialog message
at the moment, this just performs a baked avatar check for everybody in the region. If the check returns 'corrupt' then a baked texture is missing and other avatars will continue to see the gas ball.
This reverts commit a8913141c0.
Pulling this back until some testing under various money
modules can be done. Need to be able to make purchases as
a child agent.
At the moment, this command just asks the AvatarFactory to perform the existing baked texture check for each avatar in the simulator and returns "OK" or "corrupt".
This is for debugging purposes
We want to execute the (optional) user script after I/O is done on the oar.
I wasn't aware that ArchiveRegion is asynchronous -- now I am.
Should fully resolve comment 0018290 at
http://opensimulator.org/mantis/view.php?id=5440
limits because the only ones used now are the defaults (which are overwritten
by the client throttles anyway). Updated the default rates to correspond to
about 350kbps.
Also added a configuration to disable adaptive throttle. The default
is the previous behavior (no adaptation).
command to look at the entity update priority queue. Added a "name" parameter
to show queues, show pqueues and show throttles to look at data for a specific
user.
See http://opensimulator.org/mantis/view.php?id=5336
It turns out that viewer 2 was upset by the lack of a response to viv_watcher.php. This would send it into a continuous login loop.
Viewer 1 was quite happy to ignore the lack of response.
This commit puts in the bare minimum 'OK' message in response to viv_watcher.php. This allows viewer 2 voice to connect and appears to work.
However, at some point we need to fill out the watcher response, whatever that is.
to the entity update queue. The number of property packets can
become significant when selecting/deselecting large numbers of
objects.
This is experimental code.
This applies to adding/removing estate users, groups, managers and bans.
This is the application of the AllEstates_0.5.patch from http://opensimulator.org/mantis/view.php?id=5420
Thanks very much, Snoopy!
In order to pass ILandObject into IClientAPI.SendLandProperties(), had to push ILandObject and IPrimCounts into OpenSim.Framework from OpenSim.Region.Framework.Interfaces, in order to avoid ci
Counts are showing odd behaviour at the moment, this will be addressed shortly.
Use a boolean flag to tell timers that fire after IRegionModuleBase.Close() is called that they should not execute.
Also, I used MonoDevelop's auto-formatting feature to format the code uniformly. No guarantee about variable names though.
Justin Clark-Casey (justincc)