Unfortunately, this meant publicly exposing the underlying service for the connector.
The other solution would be to create alternative initializers for services and connectors where objects could be given directly rather than loaded indirectly through config.
Unfortunately, this would require a lot of work in this case but might be the better way forward.
Fixes: Undo, T-pose of others on login, modifiedBulletX works again, feet now stand on the ground instead of in the ground, adds checks to CombatModule. Adds: Redo, Land Undo, checks to agentUpdate (so one can not fall off of a region), more vehicle parts. Finishes almost all of LSL (1 function left, 2 events).
Direct flames and kudos to Revolution, please
Signed-off-by: Melanie <melanie@t-data.com>
These patch should allow people using systems that do not have their locale set to En_US or similar to use OpenSim without suffering effects such as being a million miles up in the air on login.
The problem was caused by parsing strings without forcing that parse to be En_US (hence different decimal and digit group symbols were causing problems).
Thanks very much to VikingErik for doing the legwork on this fix and phacelia for spotting it in the first place.
This merge was very conflicted. I think I got them all, but I can't be sure.
I had to merge to master or risk divergence to the point of unmergeability.
* Cleans redundant information out of the Simulator Version. Versions now look like:
"OpenSimulator 0.6.9(dev) Unix/Mono"
* [Minor] additional log info for MySQLInventoryData
pass script state and assembly again properly. Reintroduce respecting tht
TrustBinaries flag. Changes the interregion protocol! No version bump
because it was broken anyway, so with a version mismatch it will simply
stay broken, but not crash. Region corssing still doesn't work because
there is still monkey business with both rezzed prims being pushed across
a border and attached prims when walking across a border. Teleport is
untested by may work.
script messages to region modules and sending back replies.
Hook IScriptModuleComms.OnScriptCommand to see commands and use
DispatchReply to reply to the script. It is recommended to pass the "id"
parameter from the event as the "k" parameter of the reply.
The script will receive the reply as a link message from link -1.
When I attempt to 'save oar' on a region with thousands of scripts with timers, I get a NullReferenceException every time. The problem comes from inconsistent locking in SensorRepeat.cs of the SenseRepeaters List. It is iterated and modified in many places and these places are all wrapped in a lock except in the GetSerializationData(). This is the function throwing the exception because an item in the list becomes null during iteration.
The attached patch locks SenseRepeatListLock in GetSerializationData()
debug pane. This will still use DEBUG_CHANNEL currently, since it is not
fully implemented. This also removes the "Compiled successfully" message
that pops up in the viewer.
* Shrinks the largest in-memory object, the LLRAW.HeightmapLookupValue struct (only used for exporting to LLRAW terrain files), to the minimum possible size. This seems to have the odd side effect of cutting the size of the two double[256,256] terrain objects in half. Possibly an alignment optimization?
there is only one element in the range, it must
also coincide with the specified stride. The
existing code assumes that the stride starts at
start ( which is the expected and most useful
behavior).
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
Linux (as an example), it is possible for the existence check to fail
because the file is not yet recognized by the file system. Although
the loop has a 250mS delay, in practise, the existence test in the for
loop is successful and no delay is introduced.
Next, this takes care of the two, unpredictable, situations where a
script fails to compile. The first is caused by an occasional SEGV in
the underlying mono VM while mcs is running, the second is caused by
file system latency.
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
Http-in and makes the host name for URL generation configurable.
Applied with changes:
llGetSimulatorHostname was not changed, because the change breaks
existing behavior and carries a data exposure risk. That value needs
to be configurable, the proposed fixed change is not acceptable.
This patch allows the land owner to dynamically set the SIP address of a particular land parcel from script. This allows predetermined SIP addresses to be used, making it easier to allow non OpenSim users to join a regions voice channel.
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
association. Then, whenever there is an llSay to that channel,
the message is directed to the OpenSim console log (and NOT
forwarded to the client). This is a great way to capture scripting
events to the log. To enable, add ScriptConsoleChannel = -xxx to
the ScriptEngine parameters in the .ini file. Note that the
message is written using Console.WriteLine rather than
the rather more fragile log4net service. The console channel is
also not subjected to the 1024 character limit imposed on regular
say traffic.
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
implementation. If the range included only a single item
an empty list was always returned (has no-one been using
this function?)
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
* LongVersion nIni may be causing the test thread death. Pausing OpenSimulator during startup causes a nIni error that makes debugging startup operations difficult for users. It might be because when it's in pause mode, something else reads from the nini config passed? If it is, it might not be fixable.. however, if it's concurrency that causes nini death it would make sense to give each section of the tests a new IConfigSource so that they don't read from the same configsource at the same time.
This needs to be looked into. This commit, unfortunately, reinstates
a memory leak in regions that see significant script fluctuation,
e.g. lots of scripted attachments, or script development.
Fixes Mantis #3979
Applied with changes. Changed ThreatLevel to High since all discovery
functions are a high threat. Overriding that is the responsibility
of the grid owner.
|Date: Wed, 5 Aug 2009 09:51:52 -0700
|Subject: [PATCH] Closed two major memory leaks for scripted objects
|
|Two major memory leaks for the scripted objects were fixed
|- One leak had to do with remoting acrossing app domains. When a script and
| its controlling agent communicate across an application boundary, it calls
| functions on a stub proxy object that then invokes the remote method on
| the object in the other app domain. These stub objects (two for each script)
| were setup to have infinate lifetimes and were never being garbage collected.
|- The second leak was the result of adding a scene object part instance method
| to a scene event and never removing it. This cause the event's delegate list
| to maintain a link to that object which is then never freed as the scene event
| object is never destroyed.
Patch applied, please direct feedback to me. Possible issue: Longtime idle
scripts like vendors may fail.
[1] Added a new OnAttach event to Scene/EventManager
[2] Hooked up existing attach event handler in XEngine.
[3] Modified SceneGraph and Scene.Inventory to trigger
attach events at the appropriate places. I was forced
to distribut the changes across two files because of
the way attach processing is distributed across the
two files.
[4] In the case of RezSingleAttachmentFromInventory it is
necessary to handle event scheduling in a special way.
There is no synchronous path available, so the fact
that this object is attached, and who it is attached to,
is cached when the ScriptInstance is created. When
the script is started, the attached handler is driven
after on_rez (but before changed, this should be reviewed).
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
The vector parameter to llSetPos() specifies an absolute position for
an unlinked prim or the root prim of a linkset; however, when the
function is used by a child prim, the vector specifies a relative
offset from the root prim. The changed introduced in llSetPos() treats
this value as an absolute position in all cases, which has the unintended
effect of mangling the position of child prims.
balancer plugin work again. Create a new method, GetClientEP, to retrieve
only the EndPoint for script usage. Marked the purpose of the method
in IClientAPI.cs with a warning. Also restored the corresponding SetClientInfo
functionality.
Attached is a patch that changes the oar file saving of creation date/time to an integer
instead of a string. I did this after justincc emailed me saying there is a problem
with internationalisation doing it the old way and I said I'd fix it. Its been
tested with MySQL and I've made the changes for MSSQL but that hasn't been well tested.
Changing the names of these methods because they were being picked up by
nunit as tests even though they were marked private. Naming them Check*
after the original Test*.
This change addresses two issues:
[1] It adds a flag field to the blendface call which allows the
caller to indicate whether or not the generated asset is
temporary, and whether or not the asset being replaced should
be explicitly retired fromt the memory cache. The decimal
values correspond to:
0 - Permanent asset, do not expire old asset
1 - Permanent asset, expire old asset
2 - Temporary asset, do not expire old asset
3 - Temporary asset, expire old asset
'3' corresponds to the default behavior seen today, and is
the continued behavior of the non-blendface calls.
[2] The dynamic texture routines are highly-asynchronous and can
be scheduled simultaneously on a multi-core machine. The nature
of the texture management interfaece is such that updates may
be lost, and the nature of asynchornous operation means that
they may be processed out of order. A lock has been added to
ensure that updates are at least atomic. No attempt has been
made to enforce ordering. The lock applies to the SceneObjectPart
being updated and is held for the lifetime of the TextureEntry
used to carry texture updates (the one instance carries all
faces supported by the prim).
Users of these services should remember that the dynamic texture
call is asynchronous and control will be returned *before* the
texture update has actually occurred. As a result, a isubsequent
GetTexture call may not return the expected asset id. A script
must wait for the corresponding TEXTURE_CHANGED event before
retrieving any texture information.
SL's LSL supports lone idents:
integer x;
x;
as well as lone idents in for-loop assignments:
for (x; x < 10; x++) { ... }
while those are errors in C# (MONO at least). This patch skips lone
idents in such places.
Fixes Mantis #3042.
For loops with no assignment are no longer syntax errors. For example,
this is now valid:
for ( ; i < 10; i++) { ... }
Corresponding changes to lsl.{lexer,parser} in r99 in opensim-libs.
Fixes Mantis #2501. Fixes Mantis #2884.
It seems overloading the method TestllAngleBetween confused nunit a bit
and caused it to try running the private TestllAngleBetween method. The
method's access modified prevented that from happening, and nunit
complained.
This patch adds oar file date and time (UTC) meta data to an oar file
when it is created. It also adds a unique ID, though this id does not
in anyway identify the machine that the oar file was created on.
When an oar file with this meta data is loaded this extra information
is saved with the region settings and available via LSL through:
- osLoadedCreationDate()
- osLoadedCreationTime()
- osLoadedCreationID()
If there is no meta data these fields will be blank. Subsequent oar
file loads will erase the information for the previous oar file
load. Persistence has only been implemented for MySQL, the other
backends need updating.
Overall this allows us to much more easily identify the specific version of
software that clients are using. Its very straightforward to edit the oar file
to change the ID string to be something more human friendly.
Included in the patch is a new file OpenSim/Data/MySQL/Resources/030_RegionStore.sql
required for the MySQL DB migration.
btw I had a chat with justincc about this a few weeks ago since he
wrote the oar file import/export and he sounded happy to accept
something that included date/time information but didn't want anything
that would silently leak private information like machine names.
The attached patch implements llPassTouches. It has been added
to the export/import XML along with the flag for AllowedInventoryDrop.
The MySQL backend has been updated as well, though I haven't
done one of those before so could do with a check. I added
the migration mysql file as well.
The other data backends need updating as well.
The attached patch implements llPassTouches. It has been added
to the export/import XML along with the flag for AllowedInventoryDrop.
The MySQL backend has been updated as well, though I haven't
done one of those before so could do with a check. I added
the migration mysql file as well.
The other data backends need updating as well.
Changes to support client-side image pre-caching in the region. This
commit adds an additional calling sequence to the DynamicTexture data
and URL calls. The new interface allows a dynamic image to be loaded
into a specific object face (rather than the mandatory ALL_SIDES
supported today.
This is in part fulfilment of ticket #458.
This may break a lot of things, but it needs to go in. It was tested in standalone and the UCI grid, but it needs a lot more testing.
Known problems:
* HG asset transfers are borked for now
* missing texture is missing
* 3 unit tests commented out for now
This is to handle the changes in the v1.23 viewer
of LL regarding the adult rating. With this patch
a region can be changed to the adult rating from
LL viewer v1.23 and above.
- AssetType isn't InventoryType. Those enums contain different numbers. Use AssetType for the asset type, InventoryType for the inventory type.
- The ToString method (or ToLower) of AssetType/InventoryType doesn't necessarily return the correct LLSD string.
- Replaced several magic numbers by their corresponding enum.
- Fixed the invType for gestures and animations in the library.
This should fix Mantis #3610 and the non-terminating inventory loading
that region. I decided against sending the terrain on every call to osTerrainSetHeight
(which makes it abysmally slow), and added a osTerrainFlush instead, which should be
called after all the terrain-changes have been done. Changed some return types to
LSL types, too, and removed some end-of-line spaces.
This is sent to all root prims of all attachments of an avatar when the
animation state changes. llGetAnimation() can thenbe used to find the
new movement animation. This eliminates the need for fast timers in AOs
of objects from the scene, and of scripts from objects. This facilitates
the development of modules that can register prims with externall servers
for inbound email and XMLRPC. Currently implemented in XEngine only.
Also applying cmickeyb's compiler locking patch, since it seems risk-free.
* Now, the 144 unit tests takes roughly as long time to run (16s on my laptop) that the 10 long running takes. The database tests takes forever.
* Feel free to run the unit tests as you code, and the rest before commit.
The attached patch implements osKey2Name and osName2Key
which converts between a UUID key for an avatar and
an avatar name and vice-versa.
osKey2Name is similar to llKey2Name except that it will work
even if the avatar being looked up is not in the same region
as the script.
This Fixes Mantis #3331
Also corrected the capping calculation in llApplyImpulse and several integer "boolean" comparisons from "== 1" to "!= 0" for true
Melanie