049bce4d00
Fixup the global defaults config parsing code.
2011-04-12 01:14:21 -04:00
64dc7e9f14
minor: remove now inaccurate comment
2011-04-11 22:35:07 +01:00
e8ecb2898c
minor: remove some mono compiler warnings
2011-04-11 22:33:24 +01:00
3a98fb080a
minor: adjust some spacing and indentation
2011-04-11 22:29:08 +01:00
464fa45ec9
Implimented HTTP_VERIFY_CERT for llHttpRequest
2011-04-11 22:22:11 +01:00
0bd6bc8fba
create "config show" as a region console command synonym for "config get".
...
This is to create greater consistency with all the other show commands.
2011-04-11 21:59:26 +01:00
d6948b15c4
Make it more obvious when it happens that DLL plugin loading fails. Improve exception output on Windows.
2011-04-11 21:51:17 +01:00
95a6ee0a37
Fix NREs harder.
2011-04-11 13:20:46 -04:00
4ad05fb01d
Fix some NREs on certain paths.
2011-04-11 13:12:26 -04:00
4974a1ce69
AutoBackup: Support region-independent settings too.
2011-04-11 12:34:26 -04:00
6e9cdb9ce3
New tokenbucket algorithm. This one provides fair sharing of the queues
...
when client and simulator throttles are set. This algorithm also uses
pre-defined burst rate of 150% of the sustained rate for each of the
throttles.
Removed the "state" queue. The state queue is not a Linden queue and
appeared to be used just to get kill packets sent.
2011-04-11 09:06:28 -07:00
72a24cf023
Merge branch 'queuetest' of ssh://opensimulator.org/var/git/opensim into queuetest
...
Conflicts:
OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs
OpenSim/Region/Framework/Scenes/Prioritizer.cs
2011-04-11 08:41:36 -07:00
f778056c7a
Removed some priority queue debugging code
2011-04-11 08:37:43 -07:00
ebc249e3be
Changed the "not in scene" check in the prioritizier to just
...
a warning. There appears to be a race condition on slow logins
that attempts to prioritize before the scene presence is fully
initialized.
2011-04-10 17:02:40 -07:00
19c6d1d569
Split the priority queue class into a seperate file. LLClientView
...
is big enough.
2011-04-10 16:57:02 -07:00
83dc2470f2
Fix a bug in the computation of the RTO. Basically... the RTO (the
...
time to wait to retransmit packets) always maxed out (no retransmissions
for 24 or 48 seconds.
Note that this is going to cause faster (and more) retransmissions. Fix
for dynamic throttling needs to go with this.
2011-04-10 16:57:02 -07:00
0bd06d8ba8
Fixed the prioritizer functions for the new priority queues
2011-04-10 16:57:02 -07:00
77cf9405de
Implements adaptive queue management and fair queueing for
...
improved networking performance.
Reprioritization algorithms need to be ported still. One is
in place.
2011-04-10 16:57:02 -07:00
9c0f3c73b1
Merge git://opensimulator.org/git/opensim
2011-04-10 18:28:54 -04:00
abea0c74c2
Add support for the new display name related functions in LSL. This does not
...
implement the display names functionality as such, but it allows scripts
that are display name aware to function as if the display name were implemented
and set to the avatar name.
2011-04-08 04:19:17 +01:00
d31175060f
trivial whitespace removal to trigger a panda rebuild
2011-04-08 00:42:35 +01:00
9bc2705f37
Fix bug where on duplication, the root part local id was continually used in populating the local id scene object index instead of each part's local id
2011-04-06 20:52:36 +01:00
8318915d7e
Signal prim count taint if the AbsolutePosition of a scene object changes.
...
This updates prim counts correctly if an object is moved by something other than an avatar (e.g. scripts, region modules)
Create TestMoveOwnerObject() regression test for this case.
2011-04-06 20:48:00 +01:00
63533412f8
Improve previous ILandObject method doc.
...
For test code, take a part name prefix when creating objects, so that these can be more easily identified in the logs
2011-04-06 18:57:50 +01:00
fa202a05e9
Add method doc to some land bitmap methods in ILandObject.
...
Also changes prim count tests to use the correct upper region bounds, though the method actually ignores the overage.
2011-04-06 17:19:31 +01:00
2497962360
Change some text to make the autoreturn mechanism more obvious, and align with the fact that it's one word rather than two.
2011-04-05 22:25:00 +01:00
acacee98c6
properly refresh object owner list when refresh button is hit on land parcel object tab
2011-04-05 22:15:06 +01:00
0e465da187
remove now unused individual LandData prim counts.
...
However, the calls to the land management module to record prims need to remain, since they were also being used to return owner object lists, etc.
This is probably why prim counts were being done there in the first place.
2011-04-05 21:25:54 +01:00
f030ba8992
replace magic numbers in llGetParcelPrimCount() with constants
2011-04-05 20:39:58 +01:00
dc6ce24443
switch llGetParcelPrimCount() to use new prim counts module
2011-04-05 20:31:52 +01:00
3d400fc663
If an object is selected, then don't include it in owner/group/others prim counts.
...
This fixes the total prim count that the viewer displays when prims are selected - it appears to ignore the total that we pass it and adds up the counts separately.
2011-04-05 18:24:23 +01:00
c1dec225ab
Handle the client's parcel info requests asynchronously rather than synchronously.
...
Handling these synchronously kills the inbound packet loop if many requests are made for remote land and those requests are handled slowly or timeout (timeout is 10s)
This can happen if a user searches for "land for sale" and then clicks many of the parcels in the list (or just presses down arrow to move through every entry).
2011-04-05 17:47:11 +01:00
f58941e89f
Make the "All Estates" option work from the client (this makes chosen changes to all the estates that the user owns).
...
This applies to adding/removing estate users, groups, managers and bans.
This is the application of the AllEstates_0.5.patch from http://opensimulator.org/mantis/view.php?id=5420
Thanks very much, Snoopy!
2011-04-05 01:30:13 +01:00
8b134f37f2
Fix a bug in the computation of the RTO. Basically... the RTO (the
...
time to wait to retransmit packets) always maxed out (no retransmissions
for 24 or 48 seconds.
Note that this is going to cause faster (and more) retransmissions. Fix
for dynamic throttling needs to go with this.
2011-04-04 14:18:26 -07:00
15c4bbea59
Fixed the prioritizer functions for the new priority queues
2011-04-04 13:19:45 -07:00
6885b7220c
Implements adaptive queue management and fair queueing for
...
improved networking performance.
Reprioritization algorithms need to be ported still. One is
in place.
2011-04-04 11:41:07 -07:00
adb14ad20a
Implement rezzing coalesced objects
2011-04-03 20:32:04 +01:00
a4b3439025
Implement rezzing coalesced objects
2011-04-03 20:26:18 +01:00
b385d4aa03
Implement taking of coalesced objects.
...
WARNING!!!!!
You can TAKE them, but you can't REZ them again. Only the first of the contained
objects will rez, the rest is inaccessible until rezzing them is implemented.
Also, rotations are not explicitly stored. This MAY work. Or not.
2011-04-03 20:24:44 +01:00
e8e940e33e
Make CHANGED_OWNER work for deeding and god-mode in-world change
2011-04-03 14:16:41 +01:00
4f56c732bc
Comment out some startup logging lines to make up for the one I added earlier on.
...
Most of these are where the region modules are telling us they are disabled. Convention is only to log when enabled (even that is really noisy)
2011-04-02 02:29:42 +01:00
7bba0177fe
If land is not group owned (group ID is always UUID.Zero) then don't check if a prim should be added to the group count
2011-04-02 01:53:47 +01:00
8e668abc6d
add test for removing group owned objects
2011-04-02 01:46:06 +01:00
01b399055b
add test for adding group object, factor out initial zero counts test
2011-04-02 01:37:46 +01:00
c13502a5cf
add remove others object prim count test
2011-04-02 01:15:17 +01:00
2c86f6ba7d
refactor: rename m_dummyUserId to m_otherUserId
2011-04-02 01:13:10 +01:00
5b0936d4b5
If the land has no group ownership (it is UUID.Zero) then don't put prims in the group count when they are also not group owned.
...
Also adds simple test for others owned count when an object is added
2011-04-02 01:07:52 +01:00
3a113f9902
A stab at making CHANGED_OWNER work
2011-04-01 22:04:29 +01:00
e974fde953
check threat configuration for LSL print()
2011-03-31 22:56:04 -07:00
8c8a0a182e
implement LSL "print()" API function
2011-03-31 21:14:53 -07:00
8f4bf43534
When asked to join region to existing estate, make first estate name the default instead of None
2011-04-01 00:55:05 +01:00
e1ceb461c0
Make default answer for 'do you wish to join region to an existing estate' yes instead of no.
2011-04-01 00:51:10 +01:00
39c610c165
Log which address and port the UDP listener is configured for. This will match that given for InternalAddress in the config (e.g. 0.0.0.0)
...
Can't obtain actually bound address until the UDP socket is used for the first time.
2011-04-01 00:41:52 +01:00
4d0cffa06e
If the prim count gets an object with invalid bounds, don't try to count it.
...
This appears to be the more probable explanation for some failures seen. Either we're counting attachments which are temporarily out of bounds (shouldn't be due to the IsAttachment) check or we're counting scene objects which have out of bounds co-ordinates (seems more likely)
2011-03-31 23:56:26 +01:00
6ae76ede98
suspend check that IAR control file is loaded for now
...
I was mistaken - some previous opensim versions don't save this file first. Will have to bump iar version number and only check iars after the bump
2011-03-31 23:09:06 +01:00
efd0c003a3
Put in temporary logging message to find out if scene objects are requesting land objects for co-ordinates outside the region
2011-03-31 22:47:18 +01:00
8022400bd4
Remove unused Datastore parameter from RegionInfo (legacy from early 2008)
2011-03-31 22:16:09 +01:00
f7ed7fc05d
When a new parcel is created, make sure the prim counts are updated.
...
This is done by tainting the counts where appropriate
2011-03-30 00:42:02 +01:00
8b16f7d976
(re)implement selected prim count.
...
This does not currently count objects that are sat upon (which the viewer ui implies should be included in this count)
2011-03-30 00:13:07 +01:00
f754dedbef
Merge branch 'primcounts'
2011-03-29 23:08:44 +01:00
fe258753a0
disable prim count debug logging temporarily
2011-03-29 23:07:01 +01:00
d3771e5366
Added code to load a terrain tile of tiff/jpg format. Previously it only worked for one single region.
2011-03-28 16:48:12 -07:00
2d209d3844
Fix mantis #5413 . WARNING: new config variable in section [GridService] of the simulators called Gatekeeper -- intended to have the URL of the grid's Gatekeeper service (so that it can be checked against). See ini.examples.
2011-03-28 16:46:04 -07:00
f25749f025
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-03-27 21:22:31 +01:00
f2d2470c25
When an object is duplicated, add it to the full/local id SOG indexes as well as Entities
2011-03-26 02:24:32 +00:00
b11e3d33f1
add save of LLClientView I forgot from last commit
2011-03-26 02:20:16 +00:00
541cd3e8c8
move total parcel prim calculations into IPrimCounts instead of doing this in LLClientView
...
need to move selected prim counts from LandData/LMM still
2011-03-26 02:19:28 +00:00
bfd9cc44b4
When an object is duplicated, add the dupe to the uuid/local id indexes as well as the basic entities list.
...
Added a prim counts test to reinforce this - shift-copy was no incrementing prim count. This will sometime become a basic scene test.
New code needs to be refactored so we just call SceneGraph.AddSceneObject(). This will happen in the near future.
With this, basic owner prim counts on a single parcel appear to be working fine (with the same previous existing taint calls as used by the land management module).
More work to do.
2011-03-26 02:05:53 +00:00
3d0e072d50
Merge branch 'master' into primcounts
2011-03-26 00:57:52 +00:00
26d16567e1
Make SceneGraph.ForEachSOG() execute once for each SOG, not once for each prim (e.g. a SOG with 3 prims would have the action executed three times).
...
To do this, a new SceneObjectGroupsByFullID index in SceneGraph which just index's prims by their root part UUID, in order to avoid the inefficiency of filtering existing lists.
Existing callers to SceneGraph.ForEachSOG() did not fail due to the multiple per SOG action executions - they were probably just much less efficient.
Code suggests that no callers expected ForEachSOG() to execute actions on sog multiple times
2011-03-26 00:53:19 +00:00
f30bf429c2
refactor: rename SOG collections in SceneGraph to make it clearer that they are indexing each part's UUID, not just the root part.
2011-03-26 00:42:48 +00:00
cc8897fceb
Add test for PCM taint. This currently fails due to unexpected behaviour of SceneGraph.ForEachSOG(). This will be corrected soon.
...
Also adds lots of temproarily debug logging
2011-03-26 00:34:49 +00:00
6ae04448f7
Start using IPrimCounts populated by PrimCountModule instead of LandData counts populated by LandManagementModule.
...
In order to pass ILandObject into IClientAPI.SendLandProperties(), had to push ILandObject and IPrimCounts into OpenSim.Framework from OpenSim.Region.Framework.Interfaces, in order to avoid ci
Counts are showing odd behaviour at the moment, this will be addressed shortly.
2011-03-25 23:05:51 +00:00
7f5019b0f2
Add ILandObject.IPrimCounts for the new prim count module.
...
Not functional yet, but tests now act against this object rather than interrogating the module directly
2011-03-25 21:47:54 +00:00
eaa37d15f2
factor out common test setup code in PCM tests
2011-03-23 23:28:23 +00:00
f001aab8aa
extend TestAddOwnerObject() to add a second object
2011-03-23 23:19:15 +00:00
ebbe3afaf1
Add PrimCountModuleTests.TestRemoveOwnerObject().
...
Also adds SceneSetupHelpers methods to easily create sogs with different part UUIDs
2011-03-23 23:14:55 +00:00
de88227bc4
refactor: simplify part of AddSceneObject() test setup by moving sog construction into SceneSetupHelpers.CreateSceneObject()
2011-03-23 22:29:27 +00:00
88673c86a4
use a 3 part object for the pcm test rather than a 1 part, for improved test coverage
2011-03-23 22:17:47 +00:00
f1f4985ab6
user a non UUID.Zero user in pcm test to avoid any special treatment of UUID.Zero
2011-03-23 22:14:04 +00:00
654aa7abeb
Extend simple PCM add object test to check all counts
2011-03-23 22:12:20 +00:00
08c3cd6b36
Add method doc to the Get*() methods on PrimCountModule
2011-03-23 22:04:14 +00:00
67cafbd33a
remove a rogue Console.WriteLine() from the last commit.
2011-03-23 21:54:02 +00:00
d011896341
Add generic EventManager.OnObjectAddedToScene and get PrimCountModule to listen for that rather than EventManager.OnParcelPrimCountAdd
...
OnParcelPrimCountAdd had the wrong semantics for the PrimCountModule - it was invoked for every entity in the scene, not just new ones, which would screw up the untainted count.
Extend automated test for this scenario.
2011-03-23 21:53:14 +00:00
b34743e5fe
Add an initial confidence-building TestAddObject() for prim counts.
2011-03-22 23:47:36 +00:00
7acade00b9
On initial setup, include estate and regions names in questions to make it clearer what they relate to.
2011-03-21 23:26:35 +00:00
3382de4d8b
In initial setup, stop a user being able to create a new estate with the same name as an existing estate.
2011-03-21 23:16:57 +00:00
060a53b896
On initial opensim setup, don't ask the user whether they want to join an existing opensim estate when there aren't any. Proceed directly to estate setup instead.
2011-03-21 22:57:20 +00:00
ee7cfc2854
refactor: use EstateDataService property directly instead of loading it into a local variable
2011-03-21 22:47:02 +00:00
2d1f0d224c
minor: slightly adjust previous method doc.
2011-03-21 22:27:16 +00:00
793bfb5a66
add method doc to IEstateDataService and IEstateDataStore interfaces
2011-03-21 22:25:20 +00:00
d3a20a1e92
On initial region registration, if the user chooses the option to make the region part of an existing estate, then list the existing region names.
2011-03-21 21:37:06 +00:00
fb890e543f
Don't send a windlight profile to clients if windlight is not set for
...
that region. This should restore normal day and night cycles for
regions without WL settings.
2011-03-21 08:02:56 +00:00
a3651eb5d0
Thanks Kevin Cozens for a patch that:
...
Fixes several spelling mistakes
2011-03-17 05:48:42 -04:00
9885f68f44
When setting media on a prim values, use generic object permissions instead of media permissions.
...
Media permissions are just meant to be checked when we want to know if a user should be shown the navigation bar or allowed to navigate. It should not be checked when we're setting the media up.
This bug was preventing a user from ever setting any more values if they had unchecked the owner settings.
2011-03-14 22:47:14 +00:00
f6b638fec9
factor inventory file loading into its own method
2011-03-12 00:49:13 +00:00
c4060e56ef
factor out iar asset load code into its own method
2011-03-12 00:35:40 +00:00
a3c7c04ead
refactor: make boolean load indicators on load iars instance fields
2011-03-12 00:28:23 +00:00
367ed585e0
introduce iar load checks which make sure archive.xml comes first, then inventory nodes, then assets
...
this is necessary for correct loading. "save iar" always saves in this order so there shouldn't be any problems - these checks are to give better feedback to other systems that may construct IARs.
2011-03-12 00:21:52 +00:00
836ab6b0e8
Change how map blocks are encoded to make map search
...
work with viewer 2.
2011-03-10 15:23:46 -08:00
ad1dea5aff
Add test for simple case where creator account with appropriate uuid exists on the target system for an iar load
2011-03-10 22:56:11 +00:00
8d69e68311
refactor: rename test user account fields
2011-03-10 22:52:41 +00:00
9ecb745ed7
factor out common scene setup code in InventoryArchiveTestCase
2011-03-10 22:48:19 +00:00
66d2d35425
extend TestLoadIarV0_1AbsentCreator() to check serialized object CreatorId as well
2011-03-10 22:40:24 +00:00
ce4421497e
re-enable item.CreatorId check in TestLoadIarV0_1AbsentCreator()
2011-03-10 22:38:52 +00:00
b821f748ac
For objects loaded from an IAR, make sure the CreatorID points towards the OSP resolved ID if newer CreationData is not present.
...
This should resolve issues where the creator for rezzed objects was being shown as "Unknown user" where previous behaviour was to show the OSP resolved account.
This is being done by parsing the serialized objects and updating the CreatorID if no CreationData exists. This operation might be expensive for sculpties where the sculpt texture is inlined with the object data. Will just have to see.
This relies on the IAR streaming inventory data before asset data (as is currently the case). Will need to introduce more stringent checks for file order on loading (much like JAR zips must start with the manifest file).
This is for IAR loading only. Tests updated to check this behaviour.
2011-03-10 21:56:15 +00:00
a151afebe3
When setting up default iar for testing, use iar archiving code rather than constructing the tar manually
2011-03-10 19:40:19 +00:00
4dd60b7dce
Change existing users load iar test so that it fulfills it's original intention (i.e. OSPA resolution, which is still active).
...
Will need to write a separate test for the simplest case where creator accounts with appropriate uuids exist on iar load.
2011-03-10 00:19:17 +00:00
549b0ea17c
Split the inventory path testing parts of TestLoadIarV0_1ExistingUsers() into a new test TestLoadIarToInventoryPaths()
2011-03-10 00:06:32 +00:00
fa1996155e
Make the item created in the default test iar an object rather than a script
2011-03-09 23:58:26 +00:00
07f68c8318
minor: change the order of some default iar setup in test case
2011-03-09 23:54:52 +00:00
9456bb77fb
Upgrade nunit.framework.dll to version 2.5.9. Fix up tests appropriately.
...
This version removes the NUnit.Framework.SyntaxHelpers namespace, so any modules with their own tests will need to delete this using statement.
2011-03-09 23:25:24 +00:00
20aeace8d7
Add log messages on teleport failure to better pin down the cause.
2011-03-09 22:03:12 +00:00
ae507bb060
Split out path tests from InventoryArchiveTests. Factor common code into test case parent
2011-03-09 01:53:27 +00:00
8a2360bf81
Simplify TestLoadIarV0_1AbsentUsers() to use common IAR test setup. Make static dictionaries on NullUserAccountData instance instead to stop user accounts being carried over between tests
2011-03-09 01:21:31 +00:00
743a6b0da5
Make -m shortcut option for --merge on load iar specific. Correct some log message origins.
2011-03-08 22:44:02 +00:00
9b345ebf73
factor out SetPartMediaFlags() function in MoapModule.
2011-03-05 02:42:47 +00:00
2e46027c14
Construct test load iar only once and reuse for each test, rather than recreating it every time
2011-03-05 02:34:44 +00:00
9e579a7891
Fold ClearMediaEntry() back into SetMediaEntry()
2011-03-05 02:21:53 +00:00
9f85ee29ac
Change MoapModule.ClearMediaEntry to set TextureEntryFace.MediaFlags back to false
...
Implement test for ClearMediaEntry()
2011-03-05 02:18:03 +00:00
12d5a20094
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-03-04 17:18:49 -08:00
3c0d607f45
Changed order of checks for local regions when processing
...
AgentUpdate messages. Should improve throttles and reprioritization
when an avatar is moving.
2011-03-04 17:17:53 -08:00
8efb01b3df
minor: remove some mono compiler warnings
2011-03-05 01:15:27 +00:00
72cb498fd0
minor: Make MoapModule namespace consistent with other modules
2011-03-05 01:13:59 +00:00
481ca910da
add test for MoapModule.SetMediaUrl()
2011-03-05 01:07:05 +00:00
3c89527b22
Fix bug where llSetPrimMediaParams() reported success but never set the media texture.
...
We weren't setting the TextureEntryFace.MediaFlags = true when a media texture was set directly via a script. This was being done when the viewer was setting them directly.
2011-03-05 00:06:51 +00:00
60989521a6
Merge git://opensimulator.org/git/opensim
2011-02-28 15:08:35 -05:00
b3c42e952f
Fix small bug with remove region; update settings docs.
...
Our impl of IRegionModuleBase.RemoveRegion didn't remove the scene from the states map.
2011-02-28 11:54:07 -05:00
018645f9f8
First pass at busy heuristics. Compile-tested only.
2011-02-28 11:45:50 -05:00
a01c44e74d
Be smarter about stopping timers. Cleanup formatting.
...
Use a boolean flag to tell timers that fire after IRegionModuleBase.Close() is called that they should not execute.
Also, I used MonoDevelop's auto-formatting feature to format the code uniformly. No guarantee about variable names though.
2011-02-28 11:04:54 -05:00
cea47491de
Fix a few little things
2011-02-27 19:49:23 +00:00
34b6904939
First working commit of AutoBackupModule.
...
It seems to do something! Heuristics are still TODO, but this is alpha 1.
2011-02-26 22:09:19 -05:00
d3511ca592
Start the timer. (Could it be that simple?)
2011-02-25 09:03:11 -05:00
cb049aa15f
s/True/true
2011-02-25 08:58:42 -05:00
bb1f03abc6
Make timer auto-respawn.
2011-02-25 08:57:48 -05:00
7fa8ed0c47
Config works, but timer isn't firing. Hmm.
2011-02-25 08:48:02 -05:00
2da9bb3ca2
Try to fix config one more time.
...
Note that the way we specify settings has changed significantly here.
2011-02-25 08:31:10 -05:00
2b04cab1ee
change some log messages from info to debug
2011-02-25 02:15:06 +00:00
0f545abfc1
Make the file expiration defaults the same whether the whole [FLOTSAM ASSET CACHE] section is missing or just the particular config values
2011-02-25 01:31:38 +00:00
939c47ac52
instead of using different default memory expiration depending on whether there is a [FLOTSAM ASSET CACHE] section present at all, use the same default all the time
...
this simplifies the code
2011-02-25 01:25:38 +00:00
beff0ac32f
log actual cache directory for FlotsamAssetCache instead of always logging the default
2011-02-25 01:18:43 +00:00
197cc3883f
Fix bug where having no maximum memory cache timeout would cause the flotsam asset cache to try using Double.MaxValue, which would cause the underlying OpenMetaverse.ExpiringCache to choke.
...
There is probably an underlying bug to fix in ExpiringCache.
2011-02-25 01:16:47 +00:00
2f5394e70d
Fix bug where avatars in other regions would not always show up on the mini-map
2011-02-24 22:33:54 +00:00
1bb0bae78a
Forces the owner of a rezzed object to be the "rezzer" of the
...
object rather than the owner of the inventory item. In theory,
this shouldn't happen unless you are using grid-wide library
for inventory.
2011-02-22 13:30:38 -08:00
5a16fa882c
Parameterizes the view distance used to compute and manage
...
child agents in neighbor regions. This means you can extend
the view on a simulator beyond the default 3x3 regions.
This uses a region default draw distance and should be
replaced at some point by the avatar specified draw distance.
That will require more careful, dynamic recomputation of child
agents every time the draw distance changes.
WARNING: this is experimental and has known instabilities. specifically
all regions "within site" should be running the same default draw distance
or agents will not be closed correctly.
2011-02-22 13:23:54 -08:00
c2658c2f14
More relevant console messages, and maybe fix config problem
2011-02-19 23:14:43 -05:00
7eac0af559
Fix an actual bug in the timer interval calculation (minutes -> msec)
2011-02-19 23:07:54 -05:00
e5c08a553c
More debug messages
2011-02-19 22:55:32 -05:00
3c9bf5c476
Fix config source stuff harder (debug console prints only; no fix yet)
2011-02-19 22:47:05 -05:00
06a4810d21
Fix config source by taking it from Initialize
2011-02-19 22:29:45 -05:00
99e8260282
Add [Modules] option for unconditionally disabling entire module globally (for easy configuration)
2011-02-19 22:08:19 -05:00
dfa63ff031
Let GetNextFile do all the string-building work for SEQUENTIAL.
2011-02-19 20:15:38 -05:00
85654f82a5
First cut of AutoBackupModule; only compile-tested so far
2011-02-19 12:25:04 -05:00
9e47018cfb
Remove test T020_TestMakeRootAgent() which hasn't been active for ages anyway
...
This test was non-viable. Keeping inactive T021_TestCrossToNewRegion() around for now since it's still useful for reference purposes in constructing a future working test.
2011-02-19 00:14:13 +00:00
60fe3d48ee
Put some CapabilitiesModule null checks in Scene
...
Stop tests setting up a capabilities module by default
2011-02-18 23:50:54 +00:00
8249d77991
If GridService.GetNeighbours() could not find the region then log a warning rather than causing a null reference on the normal log line
...
This also extends the TestChildAgentEstablished() test to actually activate the EntityTransferModule, though the test is not yet viable
2011-02-18 23:25:59 +00:00
5c92f62941
minor: remove mono compiler warning
2011-02-18 23:10:46 +00:00
dd9efc1838
extend TestChildAgentEstablished() test slightly to put in EntityTransferModule. Not yet enabled.
2011-02-18 23:05:56 +00:00
eb699df5f6
On SceneSetupHelpers, go back to calling ScenePresence.CompleteMovement() for the last stage of AddRootAgent() instead of SP.MakeRootAgent()
...
Going this extra step doesn't appear to cause any test failures.
This is arguably better for test purposes, though at some stage another method may arise which does just call AddRootAgent().
2011-02-18 22:49:19 +00:00
023f953f39
remove another unused test teardown method
2011-02-18 22:25:45 +00:00
c155f57dbe
remove unused test teardown method
2011-02-18 22:22:51 +00:00
c763edf56d
separate attachment tests out into their own class
2011-02-18 22:20:08 +00:00
88da253c94
Add very basic test which invokes the scene update loop once and checks the frame number.
...
This makes Scene.Update() match its original description of performing a single update, which also matches the semantics of SOG and ScenePresence.
2011-02-18 21:54:44 +00:00
e774679f62
minor: add method doc to a few ScenePresence methods
2011-02-18 21:19:16 +00:00
4725221435
Stop the avatar sometimes pausing for more than a second on the border when region crossing.
...
This restores a RemoveFromPhysicalScene() call in ScenePresence.CheckForBorderCrossing() when the agent has been placed in transit.
If we don't remove the agent from the physical scene, then the method continues to be called via ScenePresence.Update()
until the handover of the client between regions is completed. Since this handover can take more than 1000ms (due to the 1000ms
event queue polling response from the server), this results in the avatar pausing on the border for the entire handover period.
2011-02-18 20:54:00 +00:00
4f9c3c73ad
Add support for new naming syntax of linked regions to osTeleportAgent and osTeleportOwner.
2011-02-17 13:47:13 +01:00
47a5d8d742
Make osTeleportOwner work in foreign regions by relaxing the restrictions on teleporting an agent.
2011-02-17 13:47:12 +01:00
25265c964f
Changed console command "alert" and added new command "alert-user".
...
This addresses Mantis #4709 .
Command "alert" always sends a message to everybody; the variant "alert general" has been removed. Sending messages to one user is done with the dedicated command "alert-user".
2011-02-16 18:36:57 +01:00
918c12c965
Change the QUERYACCESS method to eliminate spurious access denied messages
2011-02-16 08:06:11 +00:00
c75e916ccf
Set filter to send proper rotations for root part
...
This allows the root prim, alone or in a set, to send it's
rotation. This fixes unsitting the avatar on sit-offsest
type teleports where the sit target is in the root prim of
a linkset.
2011-02-13 07:42:53 -08:00
a8ced66e87
Improved error message on TP failure
2011-02-12 07:28:21 -08:00
9801bf03f8
minor: add comment explaining that GetRegionsByName needs to stay in TeleportAgent for its side effects.
2011-02-12 01:14:12 +00:00
03d82a5a85
Fix bug where "My estate" name was always used even if the user entered a different name on initial setup.
...
Turns out we had stopped saving estate settings immediately after the name change. The scene constructor then reloade the settings and oblitereted the different name.
This code could be more efficient since there's no reason for scene to reload the settings when they are already known to be valid.
Thanks to Thoneve for the spot on this.
2011-02-12 01:08:56 +00:00
7e21c1eadf
Hack in a crude temporary "estate show" command
...
This will show the estate for each region, along with that estate's id and the estate owner.
This is temporary because the command output might change.
This commit also converts the estate module from the old to the new region module format
2011-02-12 00:46:01 +00:00
26727ee044
refactor: split out estate management commands into separate class
2011-02-11 23:32:38 +00:00
8fd58aa00c
add estate name to show regions console command
2011-02-11 22:10:02 +00:00
45382e6f82
Reinstated a couple of null checks related to the previous revert.
2011-02-10 06:26:26 -08:00
89bb5c0941
Revert "Hunting down mantis #5365"
...
This reverts commit ebeef02fef
2011-02-10 06:09:04 -08:00
21715396fa
Put the Ack of UseCircuitCode back to where it used to be. Some ppl are reporting login issues.
2011-02-09 17:45:19 -08:00
f33e51e2ff
Comment instrumentation out. Not needed anymore. Left in comments, in case it is needed again. Mantis #5365
2011-02-09 09:50:26 -08:00
1cd951e5ae
Fix the negative number problem in TokenBucket. mantis #5365
2011-02-09 09:39:53 -08:00
830fee145d
Revert "Brute-force debug -- mantis #5365"
...
This reverts commit 585473aade
2011-02-09 08:35:36 -08:00
1bba9c6300
Revert "Don't build strings unless we're in emergency debugging."
...
This reverts commit ba202ea9b0
2011-02-09 08:35:21 -08:00
477a869fb2
More detection of negatives.
2011-02-09 08:08:57 -08:00
473fac4dc7
Detect negative dripAmounts in TokenBuckets. These negatives result from overflown integer operations. Also added Total to the scene throttles in show throttles.
2011-02-09 08:06:20 -08:00
ba202ea9b0
Don't build strings unless we're in emergency debugging.
2011-02-08 21:09:10 -08:00
585473aade
Brute-force debug -- mantis #5365
2011-02-08 20:12:33 -08:00
117462cba1
Avoid potential race conditions on UseCircuitCode. I artificially made the race condition happen, and got very similar results to those described in mantis #5365 -- no prims/avie sent back.
2011-02-08 17:53:01 -08:00
f431bd20ec
Minor addition to the previous commit
2011-02-08 14:49:50 -08:00
82846afe4b
Minor improvement to previous commit.
2011-02-08 12:37:37 -08:00
ac7bc78555
Added emergency monitoring of UDP Outgoing packets thread. Just type "emergency-monitoring on/off"
2011-02-08 12:06:14 -08:00
d627122cdc
Mantis #5368 -- exception on WorldMap
2011-02-07 19:44:55 -08:00
d934add021
Thanks Tokeiito for noticing this bug. mantis #5366
2011-02-07 14:49:18 -08:00
ebeef02fef
Hunting down mantis #5365
...
Revert "refactor: remove redundant null checks"
This reverts commit 6e58996b4d
2011-02-07 07:45:03 -08:00
98ea78fc77
New command: show pending-objects
2011-02-06 19:39:29 -08:00
2c7e87c45b
Better output for show neighbours
2011-02-06 07:51:20 -08:00
3411d4867d
Honor check of m_Enabled in WorldViewModule.
2011-02-05 19:40:55 -08:00
cc81d924ca
Fixed Caps handlers leak
2011-02-05 19:34:02 -08:00
30fa5ad1e2
One more diagnosis command:
...
show caps
2011-02-05 19:21:12 -08:00
b20ab1063f
Added a couple of console commands to help diagnose issues:
...
show circuits: shows the lists of agent circuit data
show http-handlers: shows the currently registered http handlers
2011-02-05 17:57:30 -08:00
67555994ad
Amend to yesterday's deletions: forgot to delete the RemoteInventory module in th addin.xml file.
2011-02-05 07:55:54 -08:00
632babf8fb
Added an additional debug message, and removed a bunch of files that weren't being used anymore -- the old RemotsInventory connectors stuff.
2011-02-04 19:19:38 -08:00
f5a3eb9fd5
Added a config var to HGInventoryAccessModule called OutboundPermission that controls whether the sim lets asset POSTs happen to foreign grids or not. It's True by default. If ppl want to allow foreign visitors but don't want to allow any assets out of their grid, they should set this to False. This is the beginning of policies for these things...
2011-02-04 17:05:45 -08:00
cdd64bb8f5
For now, reinstate the call to World.GridService.GetRegionsByName() commented out in 933f47e
...
Even though we don't use the results, just getting the regions may have side effects in making hypergrid links available for the later World.RequestTeleportLocation()
2011-02-05 00:15:25 +00:00
5b7a5a5b8b
Add position to IM sent from llInstantMessage(), to better fulfill client expectations
2011-02-04 23:14:21 +00:00
722f0ba18c
Put something in the ImprovedInstantMessage.BinaryBucket for llInstantMessage() to stop this crashing viewer 2.4.0 (1.23.5 was fine with this).
...
We're putting in a string of format "<region name><x pos floor int><y pos floor int><z pos floor int> which appears to be the expected value.
This resolves http://opensimulator.org/mantis/view.php?id=5356
2011-02-04 23:07:47 +00:00
bc2e254b55
minor: fix indentation, spacing on commit 3585130
...
this previous commit tries to look up the texture by name first before just using the uuid.
this allows correct resolution of inventory textures which have uuids as names.
2011-02-04 21:55:22 +00:00
3585130ac8
SetTexture_fix
2011-02-04 21:52:06 +00:00
034327b51f
Send object date to viewer in microseconds (Fixes mantis bug #3990 )
2011-02-04 20:55:41 +00:00
1613d89383
minor: Correct misspelling of neighbour in log messages.
...
Thanks Fly-Man-
2011-02-04 20:51:51 +00:00
cf24069227
Change UpdateAgent (for changes in agent position) to be sent
...
once to each simulator rather than once to each region. This
should help with some of the delays caused by multiple outstanding
requests to a single service point.
2011-02-03 12:43:46 -08:00
8fdc810a23
Addresses mantis #5360 : CreatorData was being written as long as it wasn't null. This made iars backwards incompatible when some items had non-null foreign creators. This patch adds an explicit option (-c) to preserve foreign creator information.
2011-02-03 04:07:36 -08:00
4f7cf491e6
Comment out texture CAPS 'texture not found' message for now
2011-02-02 20:02:10 +00:00
2413e9eb3f
Record number of resent packets in LindenUDP stack and display in stats report
2011-02-02 20:00:50 +00:00
2344150b6e
Stop double counting dequeued packets for packets sent number
...
This is already being incremented in LLUDPServer.SendPacketFinal for every packet
2011-02-02 19:39:33 +00:00
0898be5750
Change SimianGroupsServicesConnectorModule.GetAgentGroupMembership() so that it returns null if the user isn't a member of the group.
...
This matches the behaviour of the same method for Flotsam Groups. This is the behaviour assumed by existing code.
Method doc also added to IGroupsServicesConnector to the make the contract clear.
2011-01-31 22:54:36 +00:00
8f008f394d
Flash out the prim count module
2011-01-29 04:27:20 +00:00
e7d5ff9bd2
Create the structure of classes and interfaces to replace the cruft that
...
is in the land management module today
2011-01-29 02:24:27 +00:00
0936455725
Adding the prim count module skeleton
2011-01-28 23:44:17 +00:00
38bfdb0c9d
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-01-28 23:22:16 +00:00
5942385d0e
Add the prim count interfaces
2011-01-28 23:21:41 +00:00
933f47e89d
Comment out unused call to GridService in TeleportAgent()
2011-01-28 22:59:07 +00:00
a4acf485d7
minor: don't bother reparsing the sources for includes if ReadConfig() was unsuccessful
2011-01-28 22:50:49 +00:00
1fcb919798
If a non-globbed included file from config cannot be found then warn the user
2011-01-28 22:46:29 +00:00
ab1ec3c3cc
minor: remove a few mono compiler warnings
2011-01-28 21:51:25 +00:00
a0380af18f
Display supported file extensions/formats in "terrain load help" (Mantis #5349 )
2011-01-28 21:24:05 +00:00
9798b044fe
Added loading and saving of terrain files using Terragen format (Mantis #1564 )
...
Terrain files can now be loaded and saved using the Terragen (.ter) format.
Selection of the terrain file loader to use is now based on the extension
of the filename being loaded and the data is loaded using a memory stream
instead of writing it to a file and then loading it from the file.
2011-01-28 21:19:53 +00:00
188d86998d
Fix up QueryAccess to also check parcels
2011-01-28 04:09:04 +00:00
d90b0c53ec
Fix bumping into sim borders and check estate bans for walking crossings
2011-01-28 02:38:14 +00:00
80bf95b7b4
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-01-28 02:34:45 +00:00
5a0cb7d37e
Thank you, Goetz, for a patch to fix prim count display in cut regions.
2011-01-28 02:34:07 +00:00
f9ea5e69c5
Refactor: Break out LoadObjects() and LoadParcels() from a longer method
2011-01-27 21:07:21 +00:00
19e4473a97
Put confirmation on "land clear" command to avoid nasty accidents
2011-01-27 20:57:59 +00:00
be3685b1a2
When an oar is loaded, do not create a default parcel before loading the parcels from the OAR.
...
The region spanning parcel shouldn't exist in this situation. If it does, when the land data is loaded it is repersisted with a local ID which comes after the ones loaded via the oar, which obliterates the oar loaded one.
Resaving the data we just loaded from the database is somewhat odd in itself (though this makes sense from the way that OAR loading was already using the same event).
2011-01-27 20:36:50 +00:00
42c0dbf49a
Show local IDs in "land show" output.
...
Also properly insert region name in "land clear" command
2011-01-27 20:11:30 +00:00
ab9a0f2f1d
Add "land clear" command
...
This clears all parcels from the currently selected region and replaces them with the single region spanning default parcel owned by the estate owner
2011-01-27 19:37:20 +00:00
5a26dc2743
Fix OAR parcel loading so that old parcels are replaced by the new instead of merged.
...
The --merge switch will still merge the old and new land parcelling.
2011-01-27 18:48:48 +00:00
e33cb3db93
remove unused CreateBaseLand()
2011-01-27 16:50:41 +00:00
b0f641fa15
Make it work
2011-01-27 06:41:07 +00:00
17801bd78b
Add a TeleportFlags member to SP so we can tell how we got there.
2011-01-27 05:33:46 +00:00
2bab8e5538
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-01-26 13:35:21 -08:00
240c0eaf1d
Remove the RestorePresences functions (which don't seem to be doing
...
anything) and clean up the code in AddNewClient (so Appearance only
gets assigned once, not three times).
2011-01-26 13:33:34 -08:00
8eb2789ae1
Add some comments on ILandObject.StartPoint and EndPoint
2011-01-26 21:19:22 +00:00
a0469daf75
Implement command "land show". This shows all the parcels on the currently selected region/s
...
This is useful for diagnostics. The command is "land show" rather than "show land" because it's implemented as a module specific subcommand.
2011-01-26 21:12:41 +00:00
c4727645b8
Removed a few more spurious appearance saves. When an avatar
...
enters a region the attachments module tries to update the
appearance with attachments that are already part of the appearance.
Just added a check to only save if the attachments weren't there
before.
2011-01-25 14:23:58 -08:00
b91c99b596
Fix script data not being reset as it should be
2011-01-24 03:07:01 +00:00
cc39d0bf4e
Fixes mantis #5343
2011-01-23 14:47:58 -08:00
a32381cb9b
stop extremely old region serialization commands from appearing in the console
...
as far as I know these are unused and unsupported. Please re-enable if this is not the case. This does not effect save-xml[2]/load-xml[2]
2011-01-22 00:27:34 +00:00
cb14e1d272
Update the "config get <section> <key>" command to "config get [<section>] [<key>]"
...
The config get command shows a current config value on the console.
Now, if <key> is omitted then all the values for the given section are printed.
If <section> is ommitted then all sections and all keys are printed.
Current config can also be dumped to a file using "config save <path>". This can be handy for resolving or eliminating config issues
2011-01-21 23:59:55 +00:00
41105948bd
remove some mono compiler warnings
2011-01-21 23:19:52 +00:00
Sean McNamara