* It doesn't generate at_target events, because they don't exist yet in the script engine.
* The Tau is different, however, compatible with scripts I tested.
* Not perfect... but pretty good.
* We should not be using ASCII anywhere except for legacy compatibility reasons.
* A large number of UTF8 Encoders are being used in places where we should be using Util.StringToField instead. These have been tagged with // ENCODING FAULT
* This should fix Mantis#799 - Japanese Profile Text does not work.
structs (such as LLUUID) are considered values by mono. comparing them against null makes no sense and the mono compiler will flag that as evaluating to always false --- except if "cleverly" disguised. the attached patch fixes such an occurrence in OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/SensorRepeat.cs.
[yes, i'm on a crusade against comparing structs against null, go ask jradford from libsl ;-)]
Here's a diff of the changes I have made in support of the following LSL
script functions.
llSetScriptState
llGetScriptState
llCSV2List
llListRandomize
llList2ListStrided
llListFindList
llResetOtherScript
llGetScriptName
It was necessary to modify ExecutorBase in support of the ScriptState
implementations.
I also modified SceneObjectPart and SceneObjectPart.Inventory to
corrects a quoting mismatch in the commentary that through off live
parsing of the files.
I also simplified the State definition at the start of BuiltinCommands.
* Added osSetPrimFloatOnWater(BOOL) to make Physical prim float at the water level.
* osSetPrimFloatOnWater(TRUE); or osSetPrimFloatOnWater(FALSE);
* By default, prim do not float at the water level.
* More work is needed on the floating, but it's a start.
Also added osSetDynamicTextureDataBlend and osSetDynamicTextureURLBlend that will allow the various textures to be blended together, but currently there are still a few bugs in them. So not ready for use yet.
* Enabled new TerrainModule. (The king is dead, long live the king!)
* Use the console command: "script terrain save file.r32" / "script terrain load file.r32" to load/save terrain. Now uses the extension to determine file format.
* MANY of the old terrain features do not have a replacement function in the new module yet, this needs to be corrected, but has not been done so far. This being said, the new module is faster and more efficient and should be a good replacement.
* Impelements llInstantMessage
* Reimplements llOwnerSay as llInstantMessage(llGetOWner(),msg).
* Try's to better identify the "True Name" of objects in llDetectedName
by checking for avatar name, scene Object Part name and entity name.
* Uses similar logic in the llSensor and llSensorRepeat functions.
This patch is intended to implement the following functions:
llIntegerToBase64
llBase64ToInteger
llParseStringKeepNulls
None of these functions are dependent upon state elsewhere in the SIM,
so they are appropriately self-contained. I've tested them out of
context, and from a script attached to an object in my test region.
* Speeding up ScriptEngine shutdown
* Sharing threads so that minimum total thread count for any amount of regions will be 2. (1 maintenance, 1 script execution)
You can choose more script exec threads if you want of course.
In this commit: Sharing maintenance thread between all regions.
In his own words:
If a prim becomes a listener or remote channel and the script is deleted, it cannot become a listener or channel again with a new script.
This patch fixes that.
Changed the public IsAdministrator back to protected,
now checks Config to see whether it is allowed to run or not.
Defaults to false (not allowed).
To use add the following to OpenSim.ini
[LL-Functions]
AllowosConsoleCommand=true
Added some info to failure on GridServices listening port so people can see what actually went wrong.
Moved most of the function/event execution module to a baseclass so other execution methods (instead of reflection) can be used with custom script modules run by ScriptEngine.Common.
+ some accumulated patches
* Converted all instances of "256" spotted to use RegionSize instead. Some approximations used for border crossings (ie 255.9f) are still using that value, but should be updated to use something based on RegionSize.
* Moving Terrain to a RegionModule, implemented ITerrainChannel and TerrainModule - nonfunctional, but will be soon.
The ScriptDialogReply packet handler is a bit of a hack job. It is currently handled similar to ChatFromViewer, which will trigger the listen() event, however this is not exactly how LL's implementation works and will/can be fixed up later.
CONFIG SET section key value value value
CONFIG GET section key
CONFIG SAVE (it saves, but does it save correctly?:)
ScriptEngine will react correctly to any config change made while it is running.
Added VISUAL BASIC.NET-support
//cs, //lsl and //vb as first characters of script will determine what compiler is used.
Compile warnings are no longer treated as errors. Script will still run.
Added a few useless and useful config options:
Write script source to harddisk for debug, Default compile language, Allowed compilers (languages), compile in release or debug mode, clean up old scripts on startup
Loads of warnings for incorrect config
Added comments and regions, restructured code
Changed a lot of AppDomain junk from console from using Console.Write to Log.Verbose and set it to #if DEBUG
All modules should now refresh their configuration runtime
Made all logging in ScriptEngine.Common get script name from actual engine
Renamed LSLLongCmdHandler to AsyncLSLCommandManager
Added auto-recover with 5 sec throttle for new MaintenanceThread
Bugfix: Scripts exceeding max and set to be killed were not killed, only removed.
Added ability to re-read configuration while OpenSim is running
All regions now sharing one MaintenanceThread
New MaintenanceThread:
- checks for script execution timeout
- re-reads config
- starts/stops threads if thread active count becomes too high/low compared to config
Speed increase on event execution:
- Reuse of try{}catch{} blocks
- Time calculation on event execution
* We still need to set the 'default particle' texture as, a particle system with no texture set doesn't work.
* The particle System Flags don't seem to be quite right yet as some flags don't seem to have an effect. So no alpha in/out, color change, affected by the wind, etc.. yet
* Thanks to Alondria for some massive work here. This update just tweaks a few things that she did.
* An example changed event syntax is at: http://opensimulator.org/wiki/Changed_Event_Example
* You can use this to trigger actions in your script if someone sits on your object_rez
* You can use this to figure out all of the CHANGED_ constants except for CHANGED_REGION, CHANGED_TELEPORT, and CHANGED_ALLOW_DROP
* Cleaned up copyright notices in AssemblyInfo.cs's
* Added Copyright headers to a bunch of files missing them
* Replaced several common string instances with a static constant to prevent reallocation of the same strings thousands of times. "" -> String.Empty is the first such candidate.
from the c# implementations of string.SubString(start,len) and string.Remove(start,len).
Especially since negative indexing and exclusion are included in the LSL versions.
This patch is closer to the LSL version. Maybe an osSubString and osRemoveString
would be appropriate?
Loads of things has been put into interfaces instead of the specific class.
We are now one step closer to ScriptServer, and its very easy to implement new script languages. Just a few lines required to make them a OpenSim script module with all its glory.
* added Util.Clip(value, min, max)
* modified asset cache's numPackets calculation to use max packet size (600) instead of 1000
* removed a few magic numbers
The list type and a bunch of support functions to LSL
Added/ReImplmented: llGetListLength(), llList2Integer(), osList2Double() (note rename),
llList2Float(), llList2String(), llList2Key(), llList2Vector(), llList2Rot(),
llList2List(), llDeleteSubList(), llGetListEntryType(), llList2CSV(), llCSV2List(),
llListInsertList(), llDumpList2String(),
Borked Still: llListSort(), llListRandomize(), llList2ListStrided(), llListFindList(),
Changed: llHTTPRequest() (Made wrapper of LSL_Types.list->List<string>)
rot * rot, vec / rot, == and != overriders for Rotations and Vectors.
Also: llRotBetween(), llGetRegionTimeDilation(). And fixing:
Error in LSL2CSConverter that botched a variable with a type name in it (ex: rotationCenter)
Fixed: Error in LSL2CSConverter that parsed which() loops incorrectly.
Fixed: Changed definition of Quaternion to <x, y, z, r> from <x, y, z, t> (As per LSL)
Finished: llEuler2Rot()
This patch implements the llHttpRequest function via a region module,
HttpScriptsRequest. There were bits and peices in LSLLong_cmd_handler,
which I moved into the region module, and just check for completed
requests and dispatch the http_response callback event instead.
works for me as of r2674
float * vector, vector * float, vector / float, vector + vector,
vector - vector, vector * vector, vector % vector and changing
x, y, z, (and r) parts of vector and rotation to be lower case
(similar to LL's LSL vectors/rots). With these changes we should
expect to run kan-ed#1, kan-ed#2 and most of kan-ed#3.
Some more modules templates classes (hoping that someone will pick some of these and work on implementing them).
Early version of the "Dynamic Texture Module", although currently there are no render modules included (so not really functional without them).
Added osSetDynamicTextureURL script function, for attaching a dynamic texture to a prim.
Some work on the console command handling. Added "change-region <regionname>" and "exit-region" so that after the use of change-region, the commands entered will apply to that region only. Then use exit-region to return to the top level (so commands then function as they did before and either apply to all regions or to the first region) (Note: this hasn't been tested very much)
Jeff Ames