e09ff343fb
Make QueuePacket() lock free. Eliminates an unneeded lock()
2008-07-22 22:49:13 +00:00
7fb103d374
Change one packet optimization to cover a case where the resend
...
queue may block indefinitely when a single packet is not acked
by the viewer and no others cwfromfor that region are pending.
2008-07-22 22:21:20 +00:00
b942d18379
renamed ScenePresence.SendFullUpdateToAllClients() to SendInitialFullUpdateToAllClients(), and added a replacement SendFullUpdateToAllClients() method. As the old one (now "Initial") has extra steps in it for sending initial updates/date, Not only was this leading to a lot more data being sent than needed to be, every time it was called. It also seems to have been causing the "other Avatars rotating when you sit down" bug.
2008-07-22 19:56:30 +00:00
f112cebde2
Refactor the packet scheduling out of ClientView. Add intelligent
...
resending, timeouts, packet discarding. Add notification event for
packet discarding. Add priority scheduling for packet queues.
Add outgoing duplicate detection facility. Correct packet sequencing.
Make provisions for automatic server side throttle adjustments (comes
in next installment)
2008-07-22 17:58:42 +00:00
b2b5675bd4
* refactor: move new inventory service call by user server to OGS1 with all the other service calls
...
* will post to mailing list about moving this shortly
2008-07-22 17:43:09 +00:00
a1d481d0f6
* minor: Make create user command appear on the region console only if the region is running standalone
2008-07-22 16:21:16 +00:00
186f83692c
Update svn properties. Squash a couple of warnings.
2008-07-22 15:01:04 +00:00
492b25362c
Clean up Meshmerizer.cs a bit to make it more readable
2008-07-21 23:08:23 +00:00
714e1f6786
* Give new uuids to all the objects loaded in from an archive.
...
* This should allow multiple copies of an archive to be loaded into different regions on the same region server
* This shouldn't affect existing operations.
2008-07-21 21:10:15 +00:00
1ef7a05b3e
Mantis#1544. Thank you kindly, Jonc, for a patch that:
...
Terrain revert using the PaintBrushes appears to work OK,
however when using 'apply to selection' the RevertArea
FloodEffect calculates the revert height incorrectly
unless the strength passed in from the viewer is 1.0
Attaching a patch to correctly reset the selected area
to the heights in the revertmap.
2008-07-21 19:29:55 +00:00
d9db56d86b
* minor: stick filename being loaded/saved from in save/load xml/oar information messages
2008-07-21 17:52:53 +00:00
8948ecbd8b
* minor: Make it clearer the region on which save and load xml/oar commands are operating
2008-07-21 17:42:13 +00:00
b798a9b7a0
* minor: add wiki link to archiving function invocation
2008-07-21 17:33:03 +00:00
5bceab785f
* Minor: correct change-region typo
2008-07-21 17:23:32 +00:00
a13a4c6144
* minor: change misleading 'all assets found' message to instead tell how many were actually located
2008-07-21 17:13:32 +00:00
6784cebf57
added support so that the packet tracker can resend packets itself as well as triggering a event. Next step to change the terrain packet resending to use these feature.
2008-07-21 16:21:59 +00:00
fb096dfbd5
added experimental packet tracker (LLPacketTracker.cs), which can be told to track a packet and if it hasn't been acked within a set time, trigger a IClientAPI event, that the application/scene can handle. Currently only terrain packet tracking is finished, Tracking for initial Prim packets (first full update for a prim) is being worked on. Future improvements would be to make it a more generic packet tracker with callback delegates instead of events.
...
Add a test event handler (which would fire after a minute if a terrain packet hadn't been acked) to scene to handle the OnUnackedTerrain event, which currently just resends the terrain patch.
The idea of this packet tracking is for the region level application to be able to know if the client stack gave up on sending a packet.
2008-07-21 15:13:34 +00:00
cda3206633
Mantis#1801. Thank you kindly, Junta_Kohime for a patch that:
...
I found a problem trying to get s value directly from a quaternion q.
Compiling a script which directly access to q.s value, caused the
following error:
CS0103: 'The . symbol cannot be used in LSL except in float values
or vector components'. Detected around: q.s
I did a small change to allow alphabetic letter "s" to be interpretated
as valid identifier. This solves the problem.
2008-07-21 13:44:56 +00:00
a432a07005
Mantis#1798. Thank you kindly, StrawberryFride for a patch that:
...
Fixes a couple of places where null reference exceptions were
being caught and ignored rather than null checks being performed.
2008-07-21 13:40:08 +00:00
9dbb6f28bc
* eliminated some warnings and added some const and readonlies
...
* refactored some member names for readability and ccc (code convention conformance)
* took away two refs from Rest.Inventory since
* System.IO is part of System
* System.Xml.Serialization is part of System.Xml
2008-07-21 10:02:55 +00:00
ce90e2ecce
some optimizations in quaternion normalization in llRot2Fwd, llRot2Left, and llRot2Up. llAxes2Rot now uses these functions for sign error correction instead of vector*quat products.
2008-07-21 09:36:22 +00:00
08f3d212ce
does some verification of the quaternion returned by llAxes2Rot and modifies the sign of the s term if a discrepency is found. This helps llAxes2Rot more closely match the Linden implementation.
2008-07-21 05:34:31 +00:00
bedd28e02e
Mantis#1797. Thank you kindly, StrawberryFride for a patch that solves:
...
Shutdown command on region server was presenting an error, failing to
send detach region for all regions, and failing to shut down
2008-07-20 22:19:39 +00:00
681433c4b7
Mantis#1796. Thank you kindly, StrawberryFride for a patch that:
...
Agent table code (INSERT / UPDATE, etc) now added to MSSQL provider.
2008-07-20 22:16:50 +00:00
8ae7dc628b
Make the max sizes of physical and nonphysical prims configurable in OpenSim.ini
...
Defaulted to 65536 and 10, respectively
2008-07-20 15:19:26 +00:00
212ab8c6d9
Change SQLite argument marker from the more standard '@' to the ':' supported
...
but earlier versions of the SQLite dll
2008-07-19 21:01:10 +00:00
9ff9279a7c
Mantis#1785. Thank you kindly, Junta_Kohime for a patch that"
...
llAxes2Rot now implemented. Important note: quaternion <x,y,z,s>
is equal to <-x,-y,-z,-s>. The result may be different from LSL
output, but it is correct. A problem of rounding caused an error
of square rooting of zero as negative number, corrected by squaring
again. Function tested 360° along 3 axes. Vector fwd, left and up
have to be normalized.
2008-07-19 14:45:10 +00:00
19fd2230bf
Update svn properties. Fix some inconsistent newlines.
2008-07-19 09:35:48 +00:00
351ee78d2a
Quick fix to make the estate ban list effective again, when the region
...
crossing is also a sim crossing. Prevents the CAPS handler from being set
up for a banned user,making them redmap out.
Dirty hack, temporary until I can work out how to do it right.
2008-07-19 06:20:57 +00:00
bcf74416a1
Fix prim link numbers (Mantis #1781 )
...
Implements additional unlink modes (unlink root prim from link set, some
multi-set operations). Linking (single and mutiple) fully implemented.
Consistent numbering of links while in world. Link/delink with predictable
link numbering. Correct link numbers in LSL.
Not all multi-set ops implemented. Link numbers still change when taken and
re-rezzed.
2008-07-19 04:05:34 +00:00
a73d87ef16
Introduce a separate connection string for estates, which defaults to the one gi
...
ven for the region datastore. Removes the flag to store prim inventories, which are now always stored.
2008-07-18 20:50:47 +00:00
bbd076544d
Patch to fix saving of estate managers list loaded during migration.
...
No longer teleports an agent home unless their root agent is being banned.
Visual blocking is still in effect.
2008-07-18 19:32:05 +00:00
6a7d544497
pulling query handling through the handlers. adding (non-functional,
...
work-in-progress) HttpHandler.
NOTE: non-active code. does not glow in the dark. non-combustible.
2008-07-18 19:28:52 +00:00
c0e389cfff
Mantis#1778. Thank you kindly, Junta_Kohime for a patch that:
...
llRot2Left and llRot2Up functions modified, using fast algebric
calculations instead of vectors and quaternions products.
The accuracy is the same. Normalization is now implemented.
2008-07-18 19:09:51 +00:00
76840906b5
Patch adds bool IsManager(LLUUID) to IEstateModule.
...
Returns true whenever the LLUUID references a user who is either an EM or
the region owner.
Please note that ownership is region-scoped, while EM is estate-scoped.
2008-07-18 18:08:34 +00:00
449c09234d
fixing copy & paste artefact.
2008-07-18 15:36:38 +00:00
611b56070b
add some locks back into the sqlite asset path, as something changed
...
that is causing a lot of out of order execution on asset fetches on
multi region sims.
2008-07-18 15:34:32 +00:00
0ea73384d4
simplifying OSHTtpHandler (a bit), adding query string matching,
...
adapting OSHttpXmlRpcHandler accordingly.
NOTE: this code is not live.
2008-07-18 15:31:28 +00:00
df1485fc51
remove all the odd quoting, on the off chance this was causing some
...
of the issue.
2008-07-18 15:19:52 +00:00
d9ba7c8339
put the entire thing inside a transaction. This probably doesn't
...
help much, but it might.
2008-07-18 15:13:19 +00:00
e2a3be254f
fix typo in create index that caused the entire migration to fail.
...
put some drop table if exist clauses in here to hopefully let this
migration work for people that are in an intermediary broken state
right now.
2008-07-18 15:10:20 +00:00
aec5f0ceed
found a better pattern for SaveOrUpdate with nhibernate
...
cleaned up the asset path a bit
2008-07-18 15:06:24 +00:00
f8721c3c1c
* refactor: break out sog loading code into two parts so that post-deserialization changes can be carried out before adding it to a scene
2008-07-18 14:42:06 +00:00
a6e2589537
force Culture to en-US in BaseHttpserver.HandleRequest() --- this
...
fixes mantis #1748 and #1771 .
2008-07-18 14:40:07 +00:00
d44dcdf97b
remove NHPrim, this turned out to be a bad idea
2008-07-18 13:44:16 +00:00
03bd6c91a9
* Fix http://opensimulator.org/mantis/view.php?id=1761
...
* Now llGetLinkNumber() returns 0 if the prim is not linked, instead of 1
2008-07-18 11:51:27 +00:00
0171e76246
squashing further warnings.
2008-07-18 10:57:18 +00:00
3fb0a08619
fixing warnings in EstateSettings and correcting coding style:
...
* warning was:
OpenSim/Framework/EstateSettings.cs(277): warning CS0472: The result of comparing `libsecondlife.LLUUID' against null is always `false'. This operation is undocumented and it is temporary supported for compatibility reasons only
* coding style: space before flow control statements please! http://blogs.msdn.com/brada/articles/361363.aspx
2008-07-18 10:33:10 +00:00
473059905f
Commented out a readline that was preventing the sim from shutting down in some cases
2008-07-18 08:22:05 +00:00
8b613e677f
Implement cast to LSL_Types.LSLInteger from double. Fix issue 1770.
2008-07-18 07:52:44 +00:00
e0e0db3660
Thanks, sempuki, for a patch that moves all grid plugins to new PluginLoader (issue 1763).
2008-07-18 04:51:41 +00:00
230a7ecaec
masks MySQL password from console startup messages
2008-07-18 03:23:40 +00:00
263633e274
Patch #9151
...
Makes the estate dialog fully functional. Implements all client facing functionality. Moves estate data from estate_settings.xml, which is used to provide defaults, to the region data store. Creates one estate for each region, and places the region in it. Converts all region bans to estate bans.
2008-07-18 02:40:47 +00:00
f87d2d8a92
added region port number to output of "show regions" command
2008-07-18 02:08:14 +00:00
0b92ff4fde
Treat LSL_Types as special cases in llList2Integer and llList2Float. This could be implemented many other places, but let's do that on a case-by-case basis.
2008-07-18 02:05:20 +00:00
bc24c0e5d7
Mantis#1768. Thank you kindly, Junta_Kohime for a patch that:
...
llRot2Fwd function modified, using fast algebric calculations
instead of vectors and quaternions products. The accuracy is
the same. Normalization is now implemented.
2008-07-18 01:20:06 +00:00
49adb6e09f
refactor - commenting out needsMeshing() and all references as createMesh() has the same logic and obsoletes the need for it.
2008-07-18 00:03:28 +00:00
f54828c957
fix build break
2008-07-17 21:07:39 +00:00
18a5cfd10f
terrain is close to working, but I still end up at the bottom of the sea
...
right now.
2008-07-17 20:58:24 +00:00
50eab18590
need to synchronize the terrain updates
2008-07-17 20:58:23 +00:00
4663999c24
first pass at Terrain implementation
2008-07-17 20:58:20 +00:00
366e09b543
add a Terrain object for the purpose of mapping. This may make sense
...
to stick up in framework later, but for now we'll just keep it close
to the data.
2008-07-17 19:58:47 +00:00
8f2154916b
if no texture, make it plywood
2008-07-17 19:58:45 +00:00
a580d7ee35
add plywood texture as a constant, as we need it in a couple of places
...
and it's super cryptic to have random UUIDs hanging out.
2008-07-17 19:58:41 +00:00
26fd0595d7
Mantis#1598. Thank you kindly, Matth for a patch that addresses:
...
The previous implementation of llEuler2Rot was not mathematically
incorrect, but it was an awkward way of posing the problem that
led to a few degenerate cases which were not handled correctly -
for example, PI rotations around X and Z axes were wrong. I put
some comments in the source about how I arrived at the current
implementation, which I think is easier to read, and gives
results that match SL.
2008-07-17 19:11:56 +00:00
6084a7ea3e
Revert "git merge"
...
This reverts commit 80e1c3742a3ba7eb9aa1686a242b36f64331095a.
2008-07-17 18:59:10 +00:00
dd144e12ba
git merge
2008-07-17 18:59:06 +00:00
1c0f27b013
finish NHibernate mapping for prims, and it even seems to work
2008-07-17 18:59:04 +00:00
43df32c52c
fix the null case for deep copy
2008-07-17 18:59:02 +00:00
0a01be9a86
more safety checks
2008-07-17 18:59:01 +00:00
db9e6584bf
add a null check for safety
2008-07-17 18:58:58 +00:00
d5e0a3a184
got basic region object saves working time for lunch
2008-07-17 18:58:47 +00:00
9aa0302e5b
early remove calls
2008-07-17 18:53:38 +00:00
6ca23c1123
rearranging variables in OSHttpRequest and adding Query property.
2008-07-17 16:51:23 +00:00
e8412dcd42
Mantis#1736. Thank you kindly, StrawberryFride for a patch that:
...
Many issues with handling connections in MSSQL, have rearchitected to
ensure that connections are always opened and closed in a timely fashion
& disposed of cleanly, and removed unnecessary lock statements. SQL
Server performance seems to have improved considerably as a result,
and various timeout errors seem to have been fixed.
2008-07-17 13:43:31 +00:00
ed4241583f
morphing OSHttpHandler interface into an abstract base class. adding
...
HTTP method matching support. adapting OSHttpXmlRpcHandler
accordingly. dropping OSHttpXmlProcessor delegate in favour of good
old XmlRpcMethodHandler delegate (was the same signature).
2008-07-17 12:54:15 +00:00
2a30e85c97
added index to ParentID on prims, as this is sorted on for prim loading.
...
This should speed up initial load of prims, especially on primy regions.
2008-07-16 22:16:46 +00:00
40ab5f2085
clean up mappings for parent id
2008-07-16 21:28:01 +00:00
6adac3bd5a
getting close on saving prims via nhibernate
2008-07-16 21:27:59 +00:00
44d0b7c724
make ParentUUID be a cached value, but allow setting it for
...
short term storage (needed to rebuild SOGs)
2008-07-16 21:27:57 +00:00
d3190236cc
fix RegionStore creation so that the .sql file works
2008-07-16 21:27:55 +00:00
194ffb4d88
made SOP have a blank setter for 2 convenience properties.
...
Got RegionStore mapping to the point that nhibernate would start, though
definitely not complete
2008-07-16 21:27:52 +00:00
58a0d0bb32
be a little more discriminating on firing ShapeChanged script events
...
so that we don't get them on every object construction.
2008-07-16 18:29:03 +00:00
d9523b4e1a
change fields to private so everyone will use properties
2008-07-16 15:18:13 +00:00
f3173735fa
Revert "refactoring of PrimitiveBaseShape to properties"
...
This reverts commit 60e13a9997da89d224fbe8a97ab42bfc6114a45f.
2008-07-16 15:10:35 +00:00
1e447478b8
refactoring of PrimitiveBaseShape to properties
2008-07-16 14:41:57 +00:00
e2d02cbf65
further property refactoring of PrimitiveBaseShape
2008-07-16 14:41:53 +00:00
c6b1a190bc
refactoring primitive base shape to use properties
2008-07-16 14:41:49 +00:00
309e479ac4
work in progress on nhibernate
2008-07-16 14:40:19 +00:00
0106f96716
Mantis#1755. Thank you kindly, Matth for a patch that solves:
...
When using math operators +,-,*,/ in an LSL script with an LSLFloat
and an integer literal the wrong result is returned. This patch
adds operators to the LSLFloat type to handle this case.
2008-07-16 14:30:22 +00:00
1e39bfb036
squashing warnings critters
2008-07-16 09:42:14 +00:00
4350613f1d
Mantis#1746. Thank you kindly, nlin for pointing out that
...
I needed to apply the patch a little better then last night
for: Dot product operator in LSL_Types.cs incorrectly returns
a component-wise vector multiplication; it should return a
scalar dot product. Thanks to M. Igarashi for the patch.
2008-07-16 03:07:54 +00:00
18aa58c63b
Fix issue 1582. The maximum allowable length for a string passed to SimChat is 1500. If it was longer than 1500, it was being truncated to 1501 characters. This caused an exception and prevented the errors from reaching the console and the user in-world.
2008-07-16 01:19:32 +00:00
620f7926f3
Mantis#1753. Thank you kindly, Kinoc for a patch that:
...
Brings Yield Prolog up to date with sourceforge version 0.9.10
Patched applies to both DotNet and XEngine.
2008-07-16 01:00:40 +00:00
2f46ab5096
add migration for SceneGroupID to char(36) plus add an index. This
...
should actually speed up deletes substantially, especially for large
regions, as this was a table scan before.
2008-07-15 20:06:58 +00:00
b5efb49d74
added new ParentUUID property to map out from SOP.
...
Updated some nhibernate parts, started in on migration.
2008-07-15 18:57:18 +00:00
d75cacb050
* Expose client statistics to the console via 'show stats'
...
* Potentially useful for diagnostics without needing to log in a client
* Packet queue statistics commented out for now pending a better way to cope with the information overload
2008-07-15 18:07:23 +00:00
00c15eb0c4
cleanup: fixing CamelCase issue with RestDeserialiseHandler.
2008-07-15 13:33:31 +00:00
8b933e53c0
fixes handler scoring method. XmlRpc code path now fully working with
...
HttpServer. :-)
2008-07-15 13:06:30 +00:00
788c3c497b
removes a Console.WriteLine(...) remnant.
2008-07-15 13:02:10 +00:00
5d0b6343a0
killing a lonesome warning that managed to creep in...
2008-07-15 12:02:49 +00:00
b77bcb6660
fixes a couple of issues i introduced yesterday, one of them MapBlock queries crashing.
2008-07-15 11:46:13 +00:00
4848dcf0e3
I had to revert the Mantis#1746 patch as although the local build
...
with Windows compiled, the automated build failed.
2008-07-15 03:17:45 +00:00
ff16a886c1
Mantis#1746. Thank you kindly, nlin & M.Igarashi for a patch that:
...
Dot product operator in LSL_Types.cs incorrectly returns a
component-wise vector multiplication; it should return a scalar
dot product. Thanks to M. Igarashi for the patch.
2008-07-15 03:06:38 +00:00
8fcd9532ab
Mantis#1745. Thank you kindly, Lulurun for a patch that:
...
Fixes simulator webmap functionality.
2008-07-15 02:59:23 +00:00
edbf997e29
added RegionID get property
2008-07-14 21:39:30 +00:00
8e3f83b1c8
* Change load-oar/save-oar status to highly experimental.
...
* See http://opensimulator.org/wiki/OpenSim_Archives for more details.
* These commands can now be used on an experimental basis. save-oar saves the entire current region (prim data, assets, prim inventory items, terrain) to a single tar.gz file.
* load-oar loads an opensim archive and entirely replaces the current region (at the moment).
2008-07-14 20:56:53 +00:00
b100b841b3
Mantis#1739. Thank you kindly, Grumly57 for an additional patch that:
...
Changed code to include Melanie's advice about X-SecondLife-Region,
then put the exact same content format as a llHTTPRequest issued by
other grids.
2008-07-14 17:47:12 +00:00
177001cdfc
* On an archive load, make the master avatar the owner of all scene objects for now
2008-07-14 16:44:50 +00:00
9cb4ba9d6b
* For now, when loading an archive all the existing scene objects get deleted by default
2008-07-14 16:23:59 +00:00
31e5d348f6
adding support for Xml2 serialization format to XmlRpcLoadXMLMethod.
2008-07-14 14:40:39 +00:00
00791594ad
Mantis#1739. Thank you kindly, Grumly57 for a patch that:
...
Implements X-SecondLife-* HTTP Headers for llHTTPRequest
2008-07-14 13:51:54 +00:00
4476d484c3
fixing warning in IRCBridgeModule and logging the exception cause now.
2008-07-14 12:32:34 +00:00
7692f3e18f
further work in progress on the HttpServer side: XmlRpc handler path
...
almost complete and soon to be ready for testing; OSHttpResponse code
out.
2008-07-14 12:18:32 +00:00
d262fb5650
adds a default value of true to the new IRC bridge configuration option "nicknum" to provide backwards compatibility for existing OpenSim.ini files
2008-07-14 09:16:07 +00:00
07bd749ac5
Patch #9150
...
Patch 7 of the region patches. Finish off the region parts of the estate dialog. Full user functionality. Terrain textures, heights, water, avatar counts, prim bonus, debug settings and region toggles can now be set from the dialog on a per-region basis. Estate stuff defaults to sane values where there are no defaults, to estate_settings.xml otherwise. Sun still b0rked :(
2008-07-14 01:39:36 +00:00
eaf9383b59
Patch #9149
...
Make all of the toggles go live. Utilizes the new database table for almost everything. Remove lots of now unneeded settings from the EstateSettings class
2008-07-14 01:32:16 +00:00
12173034d9
Patch #9148
...
Patch 5 in the region settings series. Adds a migration to ensure corrupted
data is purged and re-read from defaults. Some changes. Still no full
functionality
2008-07-14 01:29:48 +00:00
e712678689
Patch #9147
...
Patch #4 of the region settings series. Partial functionality of the new
storage system. More patches to follow.
2008-07-14 01:27:47 +00:00
476e08286e
Mantis#1728. Thank you kindly, Mikem for a patch that solves:
...
The compiler was missing grammar rules for += etc. operators on
vector.member variables, which the attached patch implements.
2008-07-14 01:07:21 +00:00
d0fb5e8c90
Mantis#1638. Thank you kindly, Salahzar for a patch that:
...
Addresses an unused field in the asset server but never get filled up.
It also makes working the recent items tab in inventory :))))
2008-07-13 18:57:13 +00:00
92cac0c6de
* minor: make scene closing log message info rather than warn
2008-07-13 00:21:23 +00:00
eb63b9bbc1
* Actually persist restored archives to the database - wasn't actually doing this before (doh)
...
* Not quite perfect yet
2008-07-13 00:18:29 +00:00
bd9736c9f8
* Elminate most of the debugging log output from the archive commands
2008-07-12 22:31:46 +00:00
da55f4d2ae
* minor: comment out a couple of lines to eliminate nhibernate compile warnings for now
2008-07-12 22:18:54 +00:00
a89385818d
* On archive loading, tell the user how many objects we are ignoring because they already exist in the scene
...
* (ability to give objects new uuids will come later)
2008-07-12 22:14:38 +00:00
23c4a409b7
minor: method documentation
2008-07-12 21:43:35 +00:00
7d97169351
* minor: thought up a better name for the last allocated local id
2008-07-12 21:07:42 +00:00
000d5e8b93
* minor: just some null guards and name changes to make it clearer that prim count is actually a prim local id dispenser
2008-07-12 21:03:12 +00:00
e30ca523ae
* refactor: Move xml/archive loading and saving code into separate methods ready for future modularization
2008-07-12 20:14:17 +00:00
b835b1d7ec
* refactor: collapse scene debug settings into same format as packet debug settings
2008-07-12 20:04:31 +00:00
91a208b6a5
* Refactor: Minor cleanup of Debug method in OpenSim.cs
2008-07-12 19:47:45 +00:00
451c3d1dd7
* Hive off ConsolePluginCommand into its own framework class
2008-07-12 19:29:49 +00:00
35d5b3991b
* Make archive default tar file modes more permissive
2008-07-12 19:19:22 +00:00
77723f8b8d
* Remove warning
2008-07-12 19:08:46 +00:00
654b3424c7
* Remove warning and tidy up logic in SceneObjectGroup.UpdatePrimFlags()
2008-07-12 19:05:12 +00:00
4e7dd0d919
* Start compressing archives
2008-07-12 18:54:21 +00:00
4ff529bdaf
Patch #9146 (No Mantis)
...
Prevent an exception caused by inventory server fetch requests
2008-07-12 18:26:25 +00:00
932ed5ec54
Mantis#1726. Thank you kindly, StrawberryFride for a patch that:
...
On an MSSQL-based Grid OpenSim installation, users could log in to the sim once,
then log off - after a short time before retrying users would be unable to log in,
and would see an empty alert box on the client with just a "close" button and no text.
Despite no users being logged into the sim, user server would report a higher number
of logins than logouts.
2008-07-12 18:05:57 +00:00
33971a7ce8
Mantis#1681. Thank you kindly, Vytek for a patch that:
...
Adds additional support for llEmail().
2008-07-12 17:23:30 +00:00
0b28cf84f1
Mantis#1718. Thank you kindly, Mircea for a patch that:
...
Adds some IRC bridge improvement.
2008-07-12 17:19:24 +00:00
132b95ec95
Mantis#1714. Thank you kindly, Krtaylor for a patch that:
...
Solves llGetListLength fails scripts when list is not initialized.
2008-07-12 17:11:43 +00:00
bdec1aea92
Mantis#1716. Thank you kindly, Nlin for a patch that:
...
Addresses the Gap when sitting on single prims with
a sit target (discrepancy with SL)
2008-07-12 17:08:34 +00:00
e6d3f7c39d
Mantis#1691. Thank you kindly, Phrearch for a pactch that:
...
Solves llGetCameraPos() implementation + permission bug.
2008-07-12 17:04:56 +00:00
9e20318667
Patch #9145 (Mantis #1723 )
...
Allows direct viewing of library scripts from inventory again
2008-07-12 13:42:32 +00:00
f629fdb88d
Patches #9143 and #9144 (Mantis #1723 )
...
Changes the permissions module to make scripts permissive only when intended
Adds security checks to asset transfers to prevent hacked clients fron
requesting script sources.
Adds security checks to llClientView to verify all aspects of ownership
and permissions for inventory based script retrieval.
2008-07-12 06:24:43 +00:00
13399ff439
Passes prim physical status to mesher from physics plugins
...
Small prims now get a full mesh if they are physical
Fixed a logic bug that was preventing many prim meshes from having excess memory cleaned up
Switched to more conservative method of vertex and triangle list trimming to prevent possible crash
2008-07-12 01:58:20 +00:00
d85774c101
Patch #9142 (No mantis)
...
Add a config option to OpenSim.ini to select between script compilers
in the XEngine without recompile.
Set UseNewCompiler=true in OpenSim.ini and try it out.
Creates the ICodeConverter interface and adapts the new compiler to it.
2008-07-12 01:34:36 +00:00
f6c7f167b9
Overloads CreateMesh method of interface IMesher to pass prim physical status to mesher
2008-07-12 01:02:41 +00:00
746c6fb1a2
Patch #9141 (Mantis #1655 )
...
Untangles llDie handling in XEngine, which resulted in a thread being
aborted while executing inside of Scene.
2008-07-12 00:06:45 +00:00
b42770bf7a
Trim out nulls from mesh vertex and triangle lists to try and save more memory
2008-07-11 20:32:58 +00:00
da68f18a6b
* Guard against a null point passed to RemoveClientCircuit (odd that this happens at all)
...
* Patch from Kurt Taylor (IBM) in http://opensimulator.org/mantis/view.php?id=1720
* Thanks Kurt!
2008-07-11 17:58:26 +00:00
53461fad2c
Patch #9140 (Mantis #1683 )
...
Add LifetimeService overrides to all MarshalByRef derived classes
to prevent the remoting interfaces from expiring.
2008-07-11 17:52:39 +00:00
3646cc32c4
Experimental physics optimization: prims with all 3 dimensions less than 0.2 meters will be meshed as a simple box
2008-07-11 17:22:37 +00:00
297ca095df
* Oops, turn off permissions debugging I stupidly hardcoded
2008-07-11 17:16:03 +00:00
f7d9b0bab7
* Move thread tracking code to base opensim server so that it's available for all servers (UGAIM as well as Region)
...
* This will work as long as those servers are actually registering any threads they use (does not include stuff plucked from the thread pool)
* command is now "show threads" rather than threads
2008-07-11 16:24:52 +00:00
8535cb52e0
* Put an info entry in the log if permissions are being bypassed
...
* might help to diagnose mantis 1712
2008-07-11 16:03:12 +00:00
1472cee72f
Mantis#1005. Thank you kindly, Mircea for a two patches that:
...
Addresses both locale issues and setting the waterHeight correctly.
2008-07-11 15:40:56 +00:00
aad55e5034
* Comment out body of experimental ParcelMediaSetTime() since MW says it causes a mono 1.2.4 compile to fail
...
and MW says it will soon be replaced anyway.
2008-07-11 14:51:02 +00:00
eec67d7402
trying to fix mantis #1711 .
2008-07-11 14:33:47 +00:00
3b9cf65234
Update svn properties.
2008-07-11 09:18:17 +00:00
130d8047a2
Thanks Mike for another LSL compiler patch which fixes a bug where 'vector v=<0, 0, -0.5>' caused a syntax error, and implements multiple assignments in one line (x = y = 3;)
2008-07-11 08:33:53 +00:00
cda5269391
Mantis#1682. Revert temporarily, Sempuki's mono addins patch
...
while he studies the issues in Windows a little bit.
2008-07-11 02:04:02 +00:00
14a6656948
Mantis#1541. Thank you kindly, Phrearch for a patch that:
...
Solves Remote Admin create_region type Casting failure.
2008-07-10 13:55:01 +00:00
81af87545e
Mantis#1391. Thank you kindly, Phrearch for a patch that:
...
Solves svnbackup svn add directory failure.
2008-07-10 13:51:56 +00:00
7fd63d9dc8
Mantis#1682. Thank you kindly, Sempuki for a patch that:
...
Move control of Mono.Addins from source attributes to external XML files.
This removes a lot of coupling of the source with Mono.Addins
2008-07-10 13:45:46 +00:00
d41c1f40a8
Patch from Mike: errors from the LSL/C# compilers are now reported to the user in-world
2008-07-10 05:40:45 +00:00
38da8960e9
Mantis#1707. Thank you, Melanie for a patch that:
...
This patch limits the maximum size of prims that can be created using libsl bots
or modified clients to 65536mper side. It also limits LSL functions to that size.
If a prim is already physical, the enforced constraint is 10m.
A prim that is larger than 10m cannot be turned physical, either via script or UI.
Linksets are handled correctly, so scaling of physical linksets is constrained by
the size of it's largest component prim. Also, turning linksets physical is based
on the size of it's largest ptim.
2008-07-10 03:13:29 +00:00
c9a7bf7e58
Mantis#1673. Thank you kindly, Matth for a patch that:
...
LSLInteger + literal integer is not an LSLInteger.
The included patch fixes the issue: LSLInteger + literal
integer is not an LSLInteger (also fixed for -,*,/)
2008-07-10 00:40:38 +00:00
817a0fa40c
*Patch as supplied in Mantis #0001705 by melanie. Fixes: Locked prims allow *any avatar* to deposit scripts in them, regardless of permissions
2008-07-09 19:53:22 +00:00
96b64d6973
Mantis#1127. Thank you kindly, Grumly57 for a patch that:
...
Addresses HTTP_METHOD parameter does not work for POST requests.
2008-07-09 18:42:34 +00:00
130cbd4376
Mantis#1704. Thank you kindly, Mjm for a patch that:
...
The attached patch implements llRemoveInventory().
2008-07-09 18:03:22 +00:00
9f68bcd80b
Mantis#1700. Thank you, Melanie for a patch that:
...
Lets osSetParcelMediaTime honor the AllowOSComamnds setting
2008-07-09 14:32:21 +00:00
58ce018625
for testing purposes only:
...
added void osSetParcelMediaTime(double time) command to script engines.
which sets the position of the media that is playing. Time is in seconds.
Doesn't do any security checking (should be checking that the object/script is owned by the parcel owner). So could be abused, if it is then we should remove it, or add the security.
Only tested in dotnet scripting engine, but should work in XEngine too.
2008-07-09 12:02:01 +00:00
7db2e19500
corrected the params types on IClientAPI.SendParcelMediaCommand. the command parameter should be set to the the ParcelMediaCommandEnum value. While flags seems to need to be set to (uint)(1<<[value of the command enum])
2008-07-09 11:01:26 +00:00
5609292101
Patch from Mike which removes a lexer warning in the LSL compiler.
2008-07-09 07:37:42 +00:00
79f68e571f
* Don't fail the archive operation if exceptions are encountered while analyzing prims
2008-07-08 17:58:45 +00:00
00a38df75a
* Guard against a failure to find an inventory item in a move request by complaining in the log rather than terminating the session
2008-07-08 16:57:48 +00:00
af825dae40
small console message change related to last revision
2008-07-08 15:37:52 +00:00
9a5a7b2614
Added option to userserver config, to be able disable/enable the LLSD Login support. As far as I know, the LLSD login method is currently only used by libsl based clients/bots. So could be useful to be able to disable this if a grid comes under a griefing attack from libsl bots.
2008-07-08 15:36:27 +00:00
01904e66f2
Mantis#1690. Thank you kindly, Melanie for a patch that:
...
esets script permissions when a script is recompiled.
2008-07-08 15:16:43 +00:00
27e3fee1cd
Mantis#1690. Thank you, Malanie for a patch that:
...
addresses "recompiles clear perms:
2008-07-08 15:10:53 +00:00
71666a894a
Mantis#1691. Applied Melanie's modification of
...
Phrearch's iiGetCameraPos() patch, but not the original
yet. Thank you Phrearch and Melanie.
2008-07-08 15:05:23 +00:00
b7fc172254
* Added experimental SendParcelMediaCommand and SendParcelMediaUpdate to IClientAPI. These methods have not been tested, but feel free to start wiring them to llParcelMediaCommandList.
2008-07-08 14:17:59 +00:00
6c13d68489
* Changed casing of some archaic methods to conform with code standards
2008-07-08 11:30:08 +00:00
d9b802bb26
* Split out various classes from IClientAPI into their own files, in accordance with code standards
2008-07-08 11:25:18 +00:00
c1d5291ae0
RegionInfo.configMember can be null for dynamically created regions
...
that are not backed by a file.
2008-07-08 11:13:26 +00:00
b1b529f94e
* Moved script packet handlers from 'unimplemented' to 'Script Packets'
2008-07-08 11:02:53 +00:00
27d9aeab0c
Patch from Mike: added unit tests for the LSL compiler
2008-07-08 08:42:17 +00:00
a73e3b4e3f
another patch from Mike: the llscript compiler is now available in XEngine as well. Thanks Mike
2008-07-08 03:02:11 +00:00
e75ff8f0a3
llscript compiler patch from Mike: adds LSL jumps and implicit variable initializations
2008-07-08 02:34:45 +00:00
1122f3f693
Mantis#1685. Thank you kindly, Mjm for a patch that:
...
The attached patch tries to read the SVN revision from local file
"svn_revision" before checking "../.svn/entries".
This allows simulators not running from the source tree to properly
display the SVN revision, if the installer generates the
"svn_revision" file.
2008-07-08 01:11:52 +00:00
19c4c9798b
changes to use NHPrim instead of SOP directly
2008-07-07 21:50:45 +00:00
b2febd03f0
add NHPrim to subclass SOP so we can stick region uuid in there.
...
I think the only place we need it is in NHibernate so a subclass
is probably appropriate.
2008-07-07 20:52:13 +00:00
7634c1311e
added skeleton (no function) region store component
2008-07-07 20:40:14 +00:00
867d72c956
change SitTarget calls from functions to properties
2008-07-07 20:12:14 +00:00
7fa00f9ecd
* remove redundant sync locking in AssetServerBase since this is already being done by the lower database layers
2008-07-07 19:32:21 +00:00
1813946937
* remove unused CommitAssets() hook for now
2008-07-07 19:18:44 +00:00
0b2fcbfec4
* Start scripts loaded from an archive
2008-07-07 18:54:11 +00:00
9362d9b231
* switch terrain archiving to raw32 rather than png to avoid unnecessary posterization. Thanks to Adam for the tip.
2008-07-07 16:37:02 +00:00
aaf8fff57e
adding support for IP EndPoint whitelisting in HttpServer code.
2008-07-07 11:25:09 +00:00
c5333af7a2
added a hollow size constraint to box, cylinder, and prism prim meshes to prevent a possible sim lockup
2008-07-07 10:09:35 +00:00
7420f96128
switching to safer locks.
2008-07-07 09:58:01 +00:00
7f0bcc5aa1
further progress on HttpServer integration: OSHttpRequest can now be
...
instantiated from both .NET and HttpServer code path.
2008-07-07 09:47:36 +00:00
56c6bdcb26
Addresses more problem box cut angles
2008-07-07 05:42:37 +00:00
063365c0dc
fix some Meshmerizer problem angles for sphere dimple and box path cut
2008-07-07 04:32:05 +00:00
6914fb6f13
disables changes in r5356 until I have more time to do further characterization
2008-07-06 19:44:59 +00:00
dfd5e675c0
Mantis#1678. Thank you kindly, Vytek for a patch that:
...
Changes ...TimeOfDay.Milliseconds to ...TimeOfDay.TotalMilliseconds
for llGetTimeOfDay() in both LSL_Api.cs and LSL_BuiltIn_Commands.cs
2008-07-06 18:39:37 +00:00
ae468bfc9b
Corrects errors in sphere mesh with dimple start angle > 0 and hollow == 0
2008-07-06 17:18:59 +00:00
ca97dda603
* In archiver, scan scripts for embedded asset uuids and save these out
2008-07-06 16:19:04 +00:00
238f2274e3
* refactor: archiver code clean up so that it's more readable for the next functionality addition
2008-07-06 15:38:39 +00:00
18c8bf99a4
Mantis#1677. Thank you, Melanie for a patch that:
...
Patch propagates the permissionToTake flag into the timer handler,
so that "take copy" and delete permissions are honored.
2008-07-06 14:19:55 +00:00
d470d30c09
Copyright notices and formatting cleanup.
2008-07-06 14:02:22 +00:00
1b69714c44
* minor: documentation in SceneObjectPart.Inventory.cs. Refactor AddInventoryItem methods to reduce code duplication
2008-07-06 13:08:52 +00:00
666626db6d
* minor: remove unnecessary locking from SOP.GetInventoryItem()
2008-07-06 12:46:17 +00:00
0b16f9eee2
* minor: Stop spurious 'item not found' messages when placing things into a prim's inventory
2008-07-06 12:35:00 +00:00
f6375fceb4
Mantis#1674. Thank you kindly, Matth for a patch that:
...
This patch fixes an error in llSetPrimitiveParams() that
prevents correctly setting the type of the prim to SCULPT_TYPE.
2008-07-06 03:47:21 +00:00
55dda82180
* Moves sending items to inventory via a delete into a seperate thread (this thread can be expanded to support all sends to inventory from inworld easily enough). Thread is temporary and only exists while items are being returned.
...
* This should remove the "lag" caused by deleting many objects.
* Patch brought to you by Joshua Nightshade's bitching at me to fix it.
2008-07-06 02:27:10 +00:00
fd69251bcd
alters a problem path cut angle for the cylinder prim profile
2008-07-06 02:04:24 +00:00
fdbf0c39d2
Add implementation of llGetTimeOfDay()
2008-07-05 16:46:03 +00:00
8465f378ac
changes prompting of create user console command to only ask for unspecified parameters and avoid an exception if the wrong number of parameters are supplied
2008-07-05 08:13:22 +00:00
c0af057588
Changed default terrain lower limit to -100 instead of 100
2008-07-05 06:31:13 +00:00
e45fa5d32d
* extend archiving asset analysis to clothing
2008-07-04 20:18:00 +00:00
8179b472c3
* On archiving, analyze body parts and save textures referenced from them
2008-07-04 20:01:55 +00:00
e1782bc249
* refactor: break out archiver's combined sync-async asset request routine ready for analysis of inventory item types other than objects
2008-07-04 18:36:12 +00:00
35bd6e8760
* Make default inventory grid server db mysql rather than sqlite
...
* This is to match all the other grid servers
2008-07-04 17:05:41 +00:00
6265a09ff9
Renaming UserManagerBase.SetUserProfile(UserProfileData) to
...
UserManager.UpdateUserProfile(UserProfileData).
Adding UpdateUserProfile(UserProfileData) to IUserService interface.
Adding RemoteAdminPlugin.XmlRpcUpdateUserAccountMethod(...) to provide
a remote update capability.
2008-07-04 11:13:25 +00:00
2dadbc2f70
mini-warnings-safari, plus cleanup of IUserServices method naming.
2008-07-04 10:19:58 +00:00
382fb8cea6
The new llScript-cs parser. Thanks Mike
2008-07-04 08:59:41 +00:00
23ec21e44a
Mantis#1647. Thank you very much, Sempuki for a patch that:
...
Updates the previous module loader work.
2008-07-04 03:11:53 +00:00
ce5122ebf3
Mantis#1659. Thank you, Melanie for a patch that:
...
In LSL, the state command should have an immediate effect.
The OpenSim script engine seems to wait until the function
ends to process the state transition.
2008-07-04 00:59:38 +00:00
cf87a9c5fe
Mantis#1660. Thank you, kindly, Melanie for a patch that:
...
Attached patch changes TRUE and FALSE to be LSLIntegers.
2008-07-03 23:06:38 +00:00
8251508412
* On client login, send only one terrain patch at a time (with pauses) instead of 4 at a time
...
* Certain terrains which are fine went patches are sent singly cause a libsecondlife failure when patches are sent in batches
* See http://opensimulator.org/mantis/view.php?id=1662 for more details
2008-07-03 23:04:12 +00:00
7fea52be35
Mantis#1661. Thank you kindly, CMickeyb for a patch that:
...
patch attached to check for timeouts on mysql connections *before*
operations occur that are likely to timeout. if timeout occurs or
the connections is down, it is reconnected before the operation fails.
2008-07-03 22:30:16 +00:00
af82b1e710
Mantis#1463. Thank you, Melanie for a patch that addresses:
...
sometimes, incorrect sit rotation is sent to other clients
2008-07-03 22:24:31 +00:00
a5e3439cf0
*.Raw files should now be loadable using "terrain load-tile" functionality
2008-07-03 22:16:09 +00:00
b1ab680a66
Mantis#1658. Thank you, Melanie for a patch that:
...
Adds IEmailModule and a module skelaton
2008-07-03 20:58:29 +00:00
a9b3c2582a
add 3 migrations, 1 each for prims, primshapes, and primitems
...
to move all their UUID stores from varchar(255) -> char(36). Based
on past evidence, this should help with performance.
2008-07-03 19:41:01 +00:00
8eb57b68f3
migrate the myisam mysql regions to innodb
2008-07-03 18:45:32 +00:00
f0f1e00ec3
add a couple of LL conversion properties to SOP. I'll wait to clean
...
up the sit target usage until the sit target fix patch goes in, but it should
be cleaned.
Get prims table mappings to the point where nhibernate likes them enough
to start.
Remove field from asset mapping so it will start
2008-07-03 18:25:18 +00:00
b9bba13c39
playing with multicolumn mapping of vectors using a custom type
2008-07-03 16:37:44 +00:00
103093cf11
Mantis#1654. Thank you kindly, Matth for a patch that:
...
Updates llGetPrimitiveParams() and associated files.
2008-07-03 15:34:05 +00:00
e3a583f4b4
Mantis#1653. Thank you kindly, Vytek for a patch that:
...
Implements llGetTimeOfDay().
2008-07-03 14:25:43 +00:00
fde6983cce
Update svn properties.
2008-07-03 03:01:02 +00:00
ba2afef0f1
*Parcel Claim date is no longer Epoch (Jan 1, 1970). Now shows the actual creation/reclaim/sale date.
2008-07-03 01:29:18 +00:00
c1456936a6
Mantis#1652. Thank you, Melanie for a patch that:
...
Applies the patch to LSL_Api.cs
2008-07-03 00:40:02 +00:00
35ec3b7a3f
Mantis#1649. Thank you kindly, Matth for a patch that:
...
This patch adds the ability to set the prim type using llSetPrimitiveParams().
Seems to work ok, but there are a staggering number of cases to test,
so I have not yet tested them all.
2008-07-02 23:19:00 +00:00
bc20c88a0a
* Allow archiver to operate even if there are 0 scene objects to save
2008-07-02 23:07:52 +00:00
3183a20632
* Start writing out control file in archive. Only contains version information right now.
2008-07-02 22:53:36 +00:00
2c113c00cf
property encapsulation for SOP
2008-07-02 20:31:17 +00:00
79f937612e
* Twiddle with archive asset extensions yet again
...
* Reintroducing asset type but this time in a long form, and with _ rather than .
2008-07-02 17:35:33 +00:00
13d6615263
Adds experimental Meshmerizer support for "prim torture" effects of sphere dimple on prim types box, cylinder, and prism
2008-07-02 17:08:52 +00:00
9052c43319
* Drop InvType from the assets table since it is no longer used
...
* Migration should be automatic on sqlite and mysql
* Migration is not automatic on mssql, you will need to drop the invType column manually
* Migration should be fine, but as for any db change, I would recommend making sure you have backups before moving past this revision
2008-07-02 16:20:54 +00:00
1deaa50240
Mantis#1647. Thank you kindly, Sempuki for a patch that:
...
attached patch adds support to constrain the number of
plugins that can be loaded per extension point.
2008-07-02 14:14:29 +00:00
7580fa5c0a
Mantis#1648. Thank you, Melanie for a patch that:
...
Fix a script Xengine deadlock/hang if llResetScript is used in changed()
2008-07-02 13:31:39 +00:00
d40bea4a8e
From: Alan M Webb <awebb@vnet.ibm.com>
...
This adds REST services for inventory access. It also allows inventory
uploads.
2008-07-02 09:02:30 +00:00
e4d68a8b64
Mantis#1643. Thank you Melanie for a patch that:
...
In the new runtime, there is a flag to diable all os* comamnds.
The implementation of osGetScriptEngineName ignored it.
This patch fixes this.
2008-07-01 21:57:36 +00:00
f162f4544c
merge rotational and angular velocity
2008-07-01 21:31:02 +00:00
c9fe500212
Added "save-prims-xml2 <PrimName> <FileName>", as we were lacking a method to save a single primitive or small group of them. This command will save all prims in the current scene that name matches the "PrimName" parameter. The saved file is in standard xml2 format, so can be loaded using load-xml2
2008-07-01 19:23:45 +00:00
0aaf0c4565
Mantis#1640. Thank you, Chernega for a patch that addresses:
...
It would appear that calling llResetScript() in state_entry() causes deadlock of region.
Probably due to llResetScript calling state_entry again. llResetScript should see who called it,
and not recall state_entry() after a state/variable reset. Once this script is in a prim,
the region/world/debug/script window shows it consuming the server (from 2,400 to 800,000 milliseconds).
2008-07-01 13:42:47 +00:00
b8a3a27221
Mantis#1641. Thank you, Lulurun for a patch that addresses:
...
The 1st "GetAvatarAppearance" *always* fails and returns default
avatarappearance. Avatarappearance seems to be working well because
the 2nd "GetAvatarAppearance" gets the right appearance.
2008-07-01 13:34:05 +00:00
0a657b9416
making XmlRpcs of RemoteController more robust; this fixes mantis #1467
2008-07-01 08:50:22 +00:00
5e63206018
From: kurt taylor (krtaylor)
...
Another new OSSL function for returning the name of the script engine
currently running, osGetScriptEngineName, added to both DotNet and XEngine
OSSL API.
2008-07-01 07:16:02 +00:00
bf34f65125
Mantis#1639. Thank you, Melanie for a patch that:
...
Reads estate_settings.xml and populates the database from it.
If there is no record, just passes the defaults to the application.
2008-07-01 02:16:58 +00:00
32ca6b6035
attempt to expire out old dynamic textures, so they don't grow forever.
2008-06-30 18:27:01 +00:00
721988adcd
add the ability to cherry pick expire something from the asset
...
cache. Bandaid until we rethink the caches a bit more.
2008-06-30 15:05:30 +00:00
4cb42d4c35
Mantis#1637. Thank you kindly, Melanie for a patch that:
...
Make each region load it's settings from the database on startup.
No user functionality yet.
2008-06-30 14:09:19 +00:00
2dfaa3c5e4
Update svn properties.
2008-06-30 12:41:32 +00:00
313f7f60fd
properly explaining each #pragma warning disable
...
massaging OSHttpRequestPump to not abort on exceptions...
2008-06-30 11:57:47 +00:00
b0287a43bd
disables spam-like debugging messages inadvertently left on in last commit (oops)
2008-06-30 06:11:43 +00:00
7077cffe52
Corrects Meshmerizer orientation of profile cut angles for ring type prim
2008-06-30 06:08:43 +00:00
a944ef4947
Corrects meshmerizer profile cut angle orientation for tube type prims
2008-06-30 02:08:27 +00:00
b0330a0bb5
disabled the multiple inventory server support in login service again.
...
And reverted CachedUserInfo back to revision 5262.
I don't think most of the inventory problems that people are reporting are due to these, but its easier to deal with one set of potential problems at a time, and I'm not going to get any time in the week to work on this anyway.
2008-06-29 20:39:34 +00:00
d8e18ad0f0
* Reload terrain from archive if there is one
2008-06-29 20:08:58 +00:00
f8d9ccc70e
* Save terrain information in archive
...
* Not yet reloading
* Terrain saving will be optional a little further down the line
2008-06-29 19:53:33 +00:00
ca06387123
Add minor comments.
2008-06-29 19:30:01 +00:00
7d5a21ddbf
* Allow terrains to be loaded and saved from streams as well as directly to and from files
...
* Should be making use of this in the next revisions
2008-06-29 19:21:43 +00:00
31c63558c8
* Fix for http://opensimulator.org/mantis/view.php?id=1512
...
* Introduce experimental wait timeout checking to mysql region datastore code
* This should mean that if the mysql connection has timed out, we should automatically reconnect and not fail or drop queries on region database manipulations
2008-06-29 18:10:38 +00:00
7917398451
added patch 1633, thanks Melanie.
...
Although I think a bit of abstraction needs to be done to make it easy to override the deleting off the inventory item when rezzing a object.
2008-06-29 13:52:03 +00:00
037b31f9db
patch from mantis #1632 , thanks Melanie
2008-06-29 12:33:45 +00:00
f3f31744ab
patch and files from mantis #1630 , Thanks Melanie
2008-06-29 11:48:58 +00:00
68bec3f69f
couple of small fixes to try to fix support for multiple inventory servers in the loginservice
2008-06-29 10:27:22 +00:00
7f847166a9
* Syncs the current revision XML Schema(xsd) to the XML Schema of revision 5251.
...
* This should resolve creating content, taking it, and being able to rez it again.
2008-06-29 02:04:44 +00:00
031b3d5314
small change to see if that helps with the inventory problems.
2008-06-28 23:05:08 +00:00
85f893f0b3
more disabling multiple inventory server support in LoginService
2008-06-28 22:19:48 +00:00
2efdeda79f
disabled multiple Inventory server support in loginservice until I get more time to look into the problems people are having.
2008-06-28 22:17:07 +00:00
6480d4ae80
small fix
2008-06-28 21:14:01 +00:00
1091f78e04
Mantis#1626. Thank you kindly, Melanie for a patch that:
...
Fixes IAvatarService for grid and standalone modes
2008-06-28 19:04:28 +00:00
0260b33517
Altered prim description/debugging message code to be more warning friendly
2008-06-28 18:04:04 +00:00
5cfc468d95
more work on the support for multiple inventory servers.
...
The Login service should now read/create new inventory on the inventory server that is set in a users profile.
Also added "Add-InventoryHost" console command to add a support for a new server to a region.
So it would be good if someone could test this. Set up the grid as normal, but then also run extra inventory server on a different computer (well actually it just has to be on a different network hostname, so one using "http://localhost:8004 " and one using "http://127.0.0.1:8005 " should work) then you need to manually edit the user profile database to set the new servers url in a user's "userInventoryURI" field.
Then on a region server, use the Add-InventoryHost to add the new server url (always include the full url, including http, but don't add a final /)
Login with that account and see if the inventory works.
Of course these needs to be made more user friendly.
2008-06-28 17:52:06 +00:00
590df180a4
Manti#1624. Thank you, Melanie for a patch that:
...
Sets XEngine threads to en-US culture before calling script events,
fixes i18n issues with european locales.
2008-06-28 17:47:06 +00:00
a9347b6ceb
Extracted the Avatar appearance functions out of the IUserService interface and moved them into a IAvatarService
...
Although "out of the box", there is no actual functional change to behavior
2008-06-28 17:43:20 +00:00
7a255d4404
Comment out StringTest until we use it somewhere.
2008-06-28 17:01:26 +00:00
2f70baee52
Mantis#1623. Thank you, Melanie for a patch that:
...
Fully defines the equality operators on the lsl types and plubs
in the script engine side of the work begun in 0001616 (aly, this one's for you)
2008-06-28 16:18:47 +00:00
c06dbf4fe5
Mantis#1620. Applied Melanie's patch
2008-06-28 16:13:11 +00:00
9a0ef22ed9
Mantis#1616. Applied Melanie's patch. This may or may
...
not break trunk.
2008-06-28 16:08:12 +00:00
86defd0a69
plumbing for multiple inventory servers. Mostly done on the region server side.
...
TODO next is to make the login server read/write a users inventory from the correct server (the inventory url set in a userprofile)
On the region side, although not tested with multiple servers it should work if that inventory url was set, and the inventory servers urls have been added to the CommunicationsManager, using CommunicationsManager.AddInventoryService(string hostUrl)
2008-06-28 15:13:17 +00:00
42e892140c
Remove one warning. We are now down to 16 warnings in
...
a build with VS2005.
2008-06-28 14:46:20 +00:00
55a4cf33a3
From: Kurt Taylor <krtaylor@us.ibm.com>
...
Patch to fix the passed parms and properly show llTakeCamera and
llReleaseCamera as deprecated. Patch for both XEngine and DotNetEngine.
2008-06-28 07:30:49 +00:00
ec7110f2cf
* Melanie adds the event manager back to the XEngine so all yr events are hers, I mean, fire.
2008-06-28 03:45:52 +00:00
e5649e0dd5
* Various documentation to some black magic parts of LLClientView
...
* Added IClientAPI.SendTexture stub.
2008-06-28 00:33:17 +00:00
8b8b45267e
altered prior warning fix to Meshmerizer.cs to allow mesh debugging code to function
2008-06-28 00:16:41 +00:00
30592156c8
tart the property wrapping in SOP. This will be a long process
...
will do more next week.
2008-06-27 23:22:14 +00:00
748f72326d
last round of warning squashing. calling it a day now.
2008-06-27 23:03:39 +00:00
20940951b2
more warnings to go.
2008-06-27 20:40:25 +00:00
810d3da2b9
* Experiment with not bothering with a seperate assets metadata file - extract necessary minimum metadata from asset filenames
...
* Make all file extensions single - double extensions look ugly and probably aren't good for Windows
2008-06-27 20:08:29 +00:00
3d26e6ede0
move along, nothing to see here. just a couple of lazy variables.
2008-06-27 19:57:06 +00:00
333b741e30
run NArrange on SOP to stack together the attributes,
...
properties, private methods, public methods, etc.
2008-06-27 19:21:15 +00:00
1646f42a80
Mantis#1615. Thank you, Matth for a patch that:
...
causes deprecated LSL functions to throw the deprecated
exception rather than not-implemented.
2008-06-27 19:13:42 +00:00
2f6a5f5575
dr scofield's continuing warnings safari:
...
* code caught lingering around with no real purpose other than causing warnings
will be taken down.
2008-06-27 18:32:32 +00:00
442a938a3f
* fix a bug where I was assuming all entities would be SceneObjectGroups - of course, some are ScenePresences
...
* would be nice to have a separate list in InnerScene in the future since a lot of methods end up screen entities for SOGs
2008-06-27 18:18:44 +00:00
7d55dfba8a
dr scofield's warnings safari:
...
* commenting out unused variables
2008-06-27 17:25:03 +00:00
feb30217de
dr scofield's warning safari:
...
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
2008-06-27 16:58:21 +00:00
ba989e9fd1
* restore suppression of mono addins manager warnings
2008-06-27 16:51:24 +00:00
9bf67201c3
* Remove responsibilty for signalling scene object change from SceneObjectPart.SendFullUpdate()
...
* This means that we will no longer pointlessly repersist all the prims in the scene when OpenSim first starts up
* This also means that force-update on the console will not trigger repersistence.
* Also, in other places persistence is no longer done where it wasn't actually necessary
* I think I changed the code for all instances correctly, but it's not possible that I missed some and some things which did persist properly have stopped
* Please patch or mantis if this is the case
2008-06-27 16:36:19 +00:00
cea6e03ae0
dr scofield's warning safari: hunting down those little buggers
2008-06-27 16:18:56 +00:00
92e04ea587
status: work-in-progress, non-functional
...
fleshing out OSHttpRequestPump code.
2008-06-27 15:57:33 +00:00
6175021300
* refactor: Remove group changed responsibilty from ScheduleGroupForTerseUpdate
2008-06-27 15:04:35 +00:00
afd2a4b206
somehow, I seem to have actually made appearance persistant
...
correctly with nhibernate. Go figure. :)
User services still remain partial, but I'm going to move
on to Region Store to get that chunk out of the way.
2008-06-27 14:53:56 +00:00
c299953ce5
* Remove SOG.SendGroupFullUpdate() group changed responsibility
2008-06-27 14:46:44 +00:00
d34a46eae1
* refactor: Move responsibility for deciding whether a group should be repersisted on to callers of SceneObjectGroup.SendGroupTeruseUpdate()
2008-06-27 14:39:21 +00:00
836557a2f7
* refactor: fission InnerScene.AddSceneObject()
2008-06-27 14:25:36 +00:00
c8cd381c56
added in new type for mapping texture objects to the db
2008-06-27 14:22:18 +00:00
c9b41bdc4e
* Add extra backup parameter to InnerScene.AddRestoredSceneObject()
2008-06-27 14:15:14 +00:00
63a1a2739a
status: work in progress, non-functional
...
having OSHttpHandler as a delegate was not too hot, i'm
refactoring it into an interface.
2008-06-27 09:29:41 +00:00
3697e0898c
Mantis#1612. Thank you, kindly, Matth for a patch that:
...
Adds the beginnints of llRemoteLoadScriptPin() and
llSetRemoteScriptAccessPin().
2008-06-27 02:22:33 +00:00
ca8d1d57e1
Mantis#1591. Thank you graciously, Sempuki for a patch that:
...
Currently module loading is done ad-hoc. I propose creating a simple
loader class that leverages Mono.Addins (and perhaps the new .NET
addins when they become available in mono). Attached is a basic
patch for review that compiles into HEAD, but doesn't yet replace
any existing ad-hoc loaders.
2008-06-27 02:15:57 +00:00
176efe3f06
Mantis#1610. Thank you, Melanie for a patch that:
...
Implements the beginning of llInventoryDrop. Doesn't cover
the actual dropping yet, just the permissions for it.
2008-06-26 23:37:21 +00:00
751150100b
Mantis#1603. Thank you, Matth for a patch to llGiveInventory
...
and Melanie for helping to finish it.
2008-06-26 20:52:05 +00:00
f8ccf00f1c
Apply patch from bug #1609 -- Documentation for Data/MSSQL. Thanks kerunix_Flan!
2008-06-26 20:25:57 +00:00
d96caaa14e
Apply patch from bug #1606 -- Documentation for Data/Null, Data/Base. Thanks kerunix_Flan!
2008-06-26 20:20:30 +00:00
9fae975a53
Apply patch from bug #1605 -- Documentation for Data/SQLite. Thanks kerunix_Flan!
2008-06-26 20:14:33 +00:00
56802afff4
Update svn properties. Minor formatting cleanup.
2008-06-26 20:04:06 +00:00
fa5f27acfa
* Put extensions on all assets in an archive
...
* Choice of extensions is a scratch set, may not yet be correct
* This facility is not useable yet - not least because I've just come across a significant save bug I need to investigate
2008-06-26 17:36:54 +00:00
314181a70d
small change to last commit
2008-06-26 17:23:05 +00:00
682ec53420
As per the suggestion on the mailing list, added support for a OpenSim.xml config file, instead of a ini file. INI files still work the same as they did before, just now if a ini file isn't found, it looks for a OpenSim.xml file (of course in xml format) and if found uses that.
...
Includes a OpenSim.Example.xml for reference (the default settings saved as a xml file).
2008-06-26 17:20:08 +00:00
744b44dc8b
WORK-IN-PRGRESS: beware of falling pieces and shifting
...
tectonic plates: starting AddHandler() code.
2008-06-26 16:10:04 +00:00
6d5d911f3f
Mantis#1600. Thank you, Melanie for a patch that:
...
Fixes persistence of variable values to address
broken persistence in the big refactor.
2008-06-26 13:49:11 +00:00
a58a47a759
Mantis#1597. Thank you, Melanie for a patch that:
...
Adds handlers for the reclaim land functionality,
plus all needed permissions checks.
2008-06-26 13:45:36 +00:00
cf00df106d
Mantis#1602. Thank you, Kinoc for a patch to:
...
Patch to activate YieldProlog on Xengine.
Only adds YieldProlog to assembly if required.
2008-06-26 13:42:18 +00:00
ca724636d4
Apply patch from bug #1601 -- more documentation for Data/MySQL. Thanks kerunix_Flan!
2008-06-26 12:38:03 +00:00
1c6bf4fe77
Mantis#1595. Thank you, Melanie for a patch that:
...
Adds pipes for the prim item flags field
2008-06-26 02:51:59 +00:00
1cd6b71b60
Mantis#1594. Thank you, Melanie for a patch that:
...
Fixes:
- Wearable icon and name sreset to default on copy/paste
- Cache is not updated when renaming/moving folders
- Partial refactor to make inventory less dependen on AssetBase having a "Name" field
- Add llGiveInventoryList() function
2008-06-26 02:46:29 +00:00
76e24d02ad
Minor refactoring of POS. Adds a Util.Clamp(x, min, max) function.
2008-06-26 02:03:40 +00:00
8a0a0f9bb5
Add patch from bug #1596 - adds Doxygen documentation in OpenSim.Data.MySQL files. Thanks kerunix_Flan!
2008-06-26 01:12:28 +00:00
e75dc1bd23
Separate POS classes into mutiple files.
2008-06-26 00:30:33 +00:00
cf1cf73839
added the flag param to IClientAPI.SendMapBlock
2008-06-25 20:14:47 +00:00
35e1a2fdfc
first part of Requestmapblocks fixes: Adds uint flags param to the OnRequestMapBlocks event (and handler), as when a client sends a map block request it also sends what layer it wants it for 0,1,2. It will always send two requests, one of them being for layer 2 (the overlay layer) and the other one either 0 or 1 depending on the tab that is selected in the client worldmap window. We should also be sending what layer the reply is for in IClientAPI.SendMapBlock (current always set to 0). That will come in next part (most likely at the weekend).
2008-06-25 20:03:16 +00:00
e4f85bcbe7
forgotten methods in SceneManager for the terrain serialising.
2008-06-25 19:46:48 +00:00
d1d846f23f
chugging away on nhibernate, more incremental process
2008-06-25 19:45:56 +00:00
Melanie Thielker