time to wait to retransmit packets) always maxed out (no retransmissions
for 24 or 48 seconds.
Note that this is going to cause faster (and more) retransmissions. Fix
for dynamic throttling needs to go with this.
Handling these synchronously kills the inbound packet loop if many requests are made for remote land and those requests are handled slowly or timeout (timeout is 10s)
This can happen if a user searches for "land for sale" and then clicks many of the parcels in the list (or just presses down arrow to move through every entry).
This applies to adding/removing estate users, groups, managers and bans.
This is the application of the AllEstates_0.5.patch from http://opensimulator.org/mantis/view.php?id=5420
Thanks very much, Snoopy!
time to wait to retransmit packets) always maxed out (no retransmissions
for 24 or 48 seconds.
Note that this is going to cause faster (and more) retransmissions. Fix
for dynamic throttling needs to go with this.
In order to pass ILandObject into IClientAPI.SendLandProperties(), had to push ILandObject and IPrimCounts into OpenSim.Framework from OpenSim.Region.Framework.Interfaces, in order to avoid ci
Counts are showing odd behaviour at the moment, this will be addressed shortly.
This is in a very crude state, currently.
The LindenUDPModule was renamed LindenUDPInfoModule and moved to OptionalModules
OptionalModules was given a direct reference to OpenSim.Region.ClientStack.LindenUDP so that it can inspect specific LindenUDP settings without having to generalize those to all client views (some of which may have no concept of the settings involved).
This might be ess messy if OpenSim.Region.ClientStack.LindenUDP were a region module instead, like MXP, IRC and NPC
* Added Calculating Time Dilation in the OdePlubin
* When multiple object updates are stuffed into one packet, average the time dilation between them as a compromise.
* Time Dilation on the update is calculated when the EntityUpdate object is created. The pre-calc-ed TD is stored in the Entity update and used when it goes out on the wire. Previously, it was 1.0 all the time. The time dilation is tied to when the update is created, not when the update is sent.
* Adds an item that checks to see if the top request has been there for longer then 30 seconds without an update and sends an AbortXfer if it encounters one. This allows the client to cancel the Xfer on it's side so you can re-select the prim and get the inventory when it fails the first time.
* Some interesting locking... Using NewFiles to lock the rest of them. We'll see how that goes.
* The goal of this is to ensure that Xfers are restartable when they fail. The client will not do that on it's own.
These locks are necessary to avoid a delete/update race condition for scene objects.
However, since we're now locking on m_killRecord this shouldn't cause delays to m_entityUpdates reprioritization
Remove the too coarse CanEditParcel method in favor of a CanEditParcelProperties
method that takes a GroupPowers argument to specify what action is to be
taken. Also, make the method to set parcel data much more granular. Permissions
in a deeded setting should now work.
Revert "This may have been the biggest, baddest bug in OpenSim ever... confusion between bytes per second and bytes per millisecond."
This reverts commit 870bbcfc6c.
Remove the too coarse CanEditParcel method in favor of a CanEditParcelProperties
method that takes a GroupPowers argument to specify what action is to be
taken. Also, make the method to set parcel data much more granular. Permissions
in a deeded setting should now work.
If an LL 1.23.5 client (and possibly earlier and later) receives an object update after a kill object packet, it leaves the deleted prim in the scene until client relog
This is possible in LLUDPServer if an object update packet is queued but a kill packet sent immediately.
Beyond invasive tracking of kill sending, most expedient solution is to always queue kills, so that they always arrive after updates.
In tests, this doesn't appear to affect performance.
There is probably still an issue present where an update packet might not be acked and then resent after the kill packet.
For each agent, this command shows how many packets have been sent/received and how many bytes remain in each of the send queues (resend, land, texture, etc.)
Sometimes useful for diagnostics
This will cause visual params to be persisted along with worn items. With
this, alpha and tattoo laters will be saved. Multiple layers MAY work, but
not tested because I don't use Viewer 2.
Setting this to true avoids a 500ms or so client freeze when the LLUDP server thread is taken up with processing a UseCircuitCode packet synchronously.
Extensive testing on Wright Plaza appeared to show no bad effects and this seems to reduce login lag considerably.
Of course, a lot of login lag is still coming from other sources.
It contains a major interface version bump and will NOT work with earlier grid
services. This is preliminary work that will lead to layers support.
Rest appearance services are commented out completely, they will have to be
adapted by someone who actually uses them. Remote admin is working, but has
no layers support. There is no layers support in the database. Login likely
won't work. You have been warned.
AvatarService -- add two new methods, GetAppearance and SetAppearance
to get around the lossy encoding in AvatarData. Preseve the old
functions to avoid changing the behavior for ROBUST services.
AvatarAppearance -- major refactor, moved the various encoding
methods used by AgentCircuitData, ClientAgentUpdate and
ScenePresence into one location. Changed initialization.
AvatarAttachments -- added a class specifically to handle
attachments in preparation for additional functionality
that will be needed for viewer 2.
AvatarFactory -- removed a number of unused or methods duplicated
in other locations. Moved in all appearance event handling from
ScenePresence. Required a change to IClientAPI that propogated
throughout all the IClientAPI implementations.
Object updates are sent on the task queue. It's possible for an object update to be placed on the client queue before a kill packet comes along.
The kill packet would then be placed on the state queue and possibly get sent before the update
If the update gets sent afterwards then client get undeletable no owner objects until relog
Placing the kills in the task queue should mean that they are received after updates. The kill record prevents subsequent updates getting on the queue
Comments state that updates are sent via the state queue but this isn't true. If this was the case this problem might not exist.
This is necessary because it was still possible for an entity update packet to be constructed, the thread to pause, a kill to be sent on another thread, and then the original thread to resume and send the update
This would result in an update being received after a kill, which results in undeletable ghost objects until the viewer is relogged
Extending the lock looks okay since its only taken by kill, update and reprioritize, and both kill and update do not take further locks
However, evidence suggests that there is still a kill/update race somewhere
* Removed StorageManager
* CONFIG CHANGE: There are no more database settings in OpenSim.ini. Check the config-include configuration files for region store and estate store database settings
These levels correspond to packets that one isn't usually interested in when debugging (e.g. regular outgoing SimStats packets)
This is equivalent to what we had a year ago before it was removed. It's extremely crude since it doesn't allow one to pick individual clients or packets. However, it can still be useful when debugging packet race conditions.
On Linden Lab clients and some derivatives, receiving an entity update after an entity deletion notice results in an undeleteable prim that disappears upon client relog.
This check was dropped in 0.7 for unknown reasons but renewed testing demonstrates that queued updates can still be present after a scene object has been deleted.
At least on stock Linden clients, updating the texture on all faces of the prim will actually send an ObjectImage packet for each update.
There is a race condition if these are handled async, meaning that occasionally not all of the faces are correctly updated.
DisableFacelights option to OpenSim.ini to finally kill those immersion-
breaking, silly vanity lights that destroy nighttime RP. Girls, you look
just fine without them. Guys, you too. Thank you. Melanie has left the building.
DisableFacelights option to OpenSim.ini to finally kill those immersion-
breaking, silly vanity lights that destroy nighttime RP. Girls, you look
just fine without them. Guys, you too. Thank you. Melanie has left the building.
nonworking ownership assignment in SOG, which messed things up before.
No longer trust the client to send the ID of the person something is copied
as, since it allows to run a script with someone else's permissions. Properly
adjust inventory ownership and perms.
nonworking ownership assignment in SOG, which messed things up before.
No longer trust the client to send the ID of the person something is copied
as, since it allows to run a script with someone else's permissions. Properly
adjust inventory ownership and perms.
This is one step towards reducing hud glitches on region crossing, since the viewer fails to display prims if it receives child full updates before the root prim full update
This commit also introduces a mechanism in LLClientView to stop child attachment updates ever going out before the root one
This is a very temporary mechanism and will be commented out when the next step of the fix (to give root prims higher udpate priority) is committed
This code is a foreport from the equivalent changes in 0.6.9-post-fixes
* Simplified the interest management code to make it easier to add new policies. Prioritization and reprioritization share code paths now
* Improved the distance and front back policies to always give your avatar the highest priority
This implements the 'share with group' flag for notecards and scripts in prim inventory since the PermissionsModule checks group membership and permissions.
Other than that, the code in PermissionsModule duplicates the checks in LLClientView so there should be no change other than allowing group members to edit embedded notecards and scripts.
For all other asset types, the permission checking code in LLClientView continues to be used, pending refactoring of suitable permissions code
This means that 'share with group' will not yet work for prim inventory items other than notecards and scripts
* Adds GetTextureModule that implements the "GetTexture" capability, aka HTTP texture fetching. This is a significantly optimized path that does not require any server-side JPEG2000 decoding, texture priority queue, or UDP file transfer
* Sanity check for null reference in LLClientView.RefreshGroupMembership()
If serverside permissions are off then this works as expected. Previously, it was impossible for more than one person to edit such items even if permissions were off.
If serverside permissions are on then this works as expected if the object was created by an avatar who had the required group active.
However, if the group for the object is later set then the contained item is still not editable. This may be linked to a wider bug where the object is still not modifiable by the group anyway
If a full update is sent after the kill, the object remains as in the linden viewer but in an undeletable and unowned state until relog
This patch prevents this by recording kills in LLClientView
* Moved the SL asset type to content type conversion methods from ServerUtils to OpenSim.Framework.SLUtil
* Linked content type to asset type in AssetMetadata
Fixes: Undo, T-pose of others on login, modifiedBulletX works again, feet now stand on the ground instead of in the ground, adds checks to CombatModule. Adds: Redo, Land Undo, checks to agentUpdate (so one can not fall off of a region), more vehicle parts. Finishes almost all of LSL (1 function left, 2 events).
Direct flames and kudos to Revolution, please
Signed-off-by: Melanie <melanie@t-data.com>
These patch should allow people using systems that do not have their locale set to En_US or similar to use OpenSim without suffering effects such as being a million miles up in the air on login.
The problem was caused by parsing strings without forcing that parse to be En_US (hence different decimal and digit group symbols were causing problems).
Thanks very much to VikingErik for doing the legwork on this fix and phacelia for spotting it in the first place.
This resolves the problem where eyes and hair would turn white on standalone configurations
When a client receives body part information, for some insane reason or other it always ends up uploading this back to the server and then immediately re-requesting it.
This should have been okay since we stored that asset in cache. However, the standalone asset service connector was not checking this cache properly, so every time the client made the request for the asset it has just loaded it would get a big fat null back in the face, causing it to make clothes and hair white.
This bug did not affect grids since they use a different service connector.
* Handle logout properly. This needed an addition to IClientAPI, because of how the logout packet is currently being handled -- the agent is being removed from the scene before the different event handlers are executed, which is broken.
When an object was deleted, the remove script instance call was aggregating the scripting events as normal.
This would queue a full update of the prim before the viewer was notifed of the deletion of that prim (QuitPacket)
On some occasions, the QuitPacket would be sent before the full update was dequeued and sent.
In principle, you would think that a viewer would ignore updates for deleted prims. But it appears that in the Linden viewer (1.23.5),
a prim update that arrives after the prim was deleted instead makes the deleted prim persist in the viewer. Such prims have no properties
and cannot be removed from the viewer except by a relog.
This change stops the prim event aggregation call if it's being deleted anyway, hence removing the spurious viewer-confusing update.
This merge was very conflicted. I think I got them all, but I can't be sure.
I had to merge to master or risk divergence to the point of unmergeability.
* Make several packets not asynchronous (such as AgentUpdate). In theory, all fast returning packet handling methods should not be asynchronous. Ones that wait on an external resource or a long held lock, should be asynchronous.
* Marking CoarseLocationUpdate as *not* zerocoded. Zerocoding can only save space when a packet contains three or more contiguous zeroes, and will use more space if it contains single zeroes randomly scattered through the packet (which is what you see when you send a long list of UUIDs)
InventoryDescendents packet. Testing has shown that UDP inventory now
works flawlessly and, unlike CAPS inventory, doesn't download the entire
agent inventory on start. Neither does it incessantly re-request folder
NULL_KEY. Therefore, I have disabled CAPS inventory.
* Unified the way region handles are stored and used in ScenePresence
* Fixed camera position for child agents
* CheckForSignificantMovement now checks avatar and camera position (both are important for scene prioritization)
* Removing debug code from the previous commit
* Fixing a bug where the max burst rate for the state category was being set as unlimited, causing connections to child agents to saturate bandwidth
* Upped the example default drip rates to 1000 bytes/sec, the minimum granularity for the token buckets
* Added a new [Startup] config option called use_async_when_possible to signal how to run operations that could be either sync or async
* Changed Scene.ForEachClient to respect use_async_when_possible
* Fixing a potential deadlock in Parallel.ForEach by locking on a temporary object instead of the enumerator (which may be shared across multiple invocations on ForEach). Thank you diva
* Lock the LLUDPClient RTO math * Add a helper function for backing off the RTO, and follow the optional advice in RFC 2988 to clear existing SRTT and RTTVAR values during a backoff
* Removing the unused PrimitiveBaseShape.SculptImage parameter * Improved performance of SceneObjectPart instantiation * ZeroMesher now drops SculptData bytes like Meshmerizer, to allow the texture data to be GCed * Improved typecasting speed in MySQLLegacyRegionData.BuildShape()
* Improved the instantiation of PrimitiveBaseShape
* Avoid allocating an Action<IClientAPI> object every round of the OutgoingPacketHandler
* Removed unnecessary semi-colon endings from OpenSim.ini.example [InterestManagement] section
* Changed Util.FireAndForget() to use any of five different methods set with async_call_method in the [Startup] section of OpenSim.ini. Look at the example config for possible values
* Change the OnQueueEmpty firing to use a minimum time until next fire instead of a sleep
* Set OutgoingPacket.TickCount = 0 earlier to avoid extra resends when things are running slowly (inside a profiler, for example)
* Removed the unused PacketSent() function
* Switched UnackedPacketCollection from a SortedDictionary to a Dictionary now that the sorting is no longer needed. Big performance improvement for ResendUnacked()
* Changed HandleQueueEmpty()'s Monitor.TryEnter() calls to locks. We want to take our time in this function and do all the work necessary, since returning too fast will induce a sleep anyways
* Clamp retransmission timeout values between three and 10 seconds
* Log outgoing time for a packet right after it is sent instead of well before
* Loop through the entire UnackedPacketCollection when looking for expired packets
* Changed the timer tracking numbers for each client to not have "memory". It will no longer queue up calls to functions like ResendUnacked
* Reverted Jim's WaitHandle code. Although it was technically more correct, it exhibited the exact same behavior as the old code but spent more cycles. The 20ms has been replaced with the minimum amount of time before a token bucket could receive a drip, and an else { sleep(0); } was added to make sure the outgoing packet handler always yields at least a minimum amount
* Added TokenBucket.cs to OpenSim, with some fixes for setting a more accurate MaxBurst value and getting a more accurate Content value (by Drip()ing each get)
* Send terrain data in a spiral pattern instead of a typewriter pattern (placeholder until terrain data becomes part of the interest list management)
* Added a debug line when resent packets are being sent
* Replaced calls to ThreadPool.QueueUserWorkItem() with ThreadPool.UnsafeQueueUserWorkItem() since OpenSim does not use Code Access Security sandboxing
* Initialize the LLClientView prim full update queue to the number of prims in the scene for a big performance boost
* Reordered some comparisons on hot code paths for a minor speed boost
* Removed an unnecessary call to the expensive DateTime.Now function (if you *have* to get the current time as opposed to Environment.TickCount, always use DateTime.UtcNow)
* Don't fire the queue empty callback for the Resend category
* Run the outgoing packet handler thread loop for each client synchronously. It seems like more time was being spent doing the execution asynchronously, and it made deadlocks very difficult to track down
* Rewrote some expensive math in LandObject.cs
* Optimized EntityManager to only lock on operations that need locking, and use TryGetValue() where possible
* Only update the attachment database when an object is attached or detached
* Other small misc. performance improvements
* Changed the Send*Data structs in IClientAPI to use public readonly members instead of private members and getters
* Made Parallel.ProcessorCount public
* Started switching over packet building methods in LLClientView to use Util.StringToBytes[256/1024]() instead of Utils.StringToBytes()
* More cleanup of the ScenePresences vs. ClientManager nightmare
* ScenePresence.HandleAgentUpdate() will now time out and drop incoming AgentUpdate packets after three seconds. This fixes a deadlock on m_AgentUpdates that was blocking up the LLUDP server
* Handle the AgentFOV packet
* Bypass queuing and throttles for ping checks to make ping times more closely match network latency
* Only track reliable bytes in LLUDPCLient.BytesSinceLastACK
* Changed the throttling logic to obey the requested client bandwidth limit but also share bandwidth between some of the categories to improve throughput on high prim or heavily trafficked regions
Replaced the update lists with a priority queue implementation in LLClientView.
The priority queues are based on the MinHeap implementation also included in
this commit within the OpneSim.Framework namespace. Initially setup to exactly
mimic the behavior beofre the change which was a first come first serve queue.
* Removed two redundant parameters from SceneObjectPart
* Changed some code in terse update sending that was meant to work with references to work with value types (since Vector3 and Quaternion are structs)
* Committing a preview of a new method for sending object updates efficiently (all commented out for now)
* Apparently the LLClientView should have been doing this previously.. Also fixed the 'You' on the index block.. so the client doesn't display an extra green dot.
* Thanks lkalif for bringing it to our attention.
* OnQueueEmpty is still called async, but will not be called for a given category if the previous callback for that category is still running. This is the most balanced behavior I could find, and seems to work well
* Added support for the old [ClientStack.LindenUDP] settings (including setting the receive buffer size) and added the new token bucket and global throttle settings
* Added the AssetLoaderEnabled config variable to optionally disable loading assets from XML every startup. This gives a dramatic improvement in startup times for those who don't need the functionality every startup
* Changed the way the QueueEmpty callback is fired. It will be fired asynchronously as soon as an empty queue is detected (this can happen immediately following a dequeue), and will not be fired again until at least one packet is dequeued from that queue. This will give callbacks advanced notice of an empty queue and prevent callbacks from stacking up while the queue is empty
* Added LLUDPClient.IsConnected checks in several places to prevent unwanted network activity after a client disconnects
* Prevent LLClientView.Close() from being called twice every disconnect
* Removed the packet resend limit and improved the client timeout check
* Added some missing implementations of IClientAPI.RemoteEndPoint
* Added a ClientManager.Remove(UUID) overload
* Removed a reference to a missing project from prebuild.xml
* Changed the ClientManager interface to reduce potential errors with duplicate or mismatched keys
* Added IClientAPI.RemoteEndPoint, which can (hopefully) eventually replace IClientAPI.CircuitCode
* Changed the order of operations during client shutdown
* Removed the confusing (and LL-specific) shutdowncircuit parameter from IClientAPI.Close()
* Updated the LLUDP code to only use ClientManager instead of trying to synchronize ClientManager and m_clients
* Remove clients asynchronously since it is a very slow operation (including a 2000ms sleep)
* Move ViewerEffect handling to Scene.PacketHandlers
* Removing the unused CloseAllAgents function
* Trimming ClientManager down. This class needs to be reworked to keep LLUDP circuit codes from intruding into the abstract OpenSim core code
* Changing OpenSimUDPBase back to high concurrency. High concurrency mode seems to make other problems happen faster, so it's helpful for working out other bugs and will probably
#13:53:03 - [LLUDPSERVER]: Packet exceeded buffer size during zerocoding. Removing MSG_ZEROCODED flag
#13:53:03 - [Scene]: Failed with exception System.ArgumentException: Offset and length were out of bounds for the array or count is greater than the number of elements from index to the end of the source collection.
# at System.Buffer.BlockCopy (System.Array src, Int32 srcOffset, System.Array dst, Int32 dstOffset, Int32 count) [0x000b7] in /home/grid/install/mono24/mono-2.4.2.3/mcs/class/corlib/System/Buffer.cs:116
# at OpenSim.Region.ClientStack.LindenUDP.LLUDPServer.SendPacketData (OpenSim.Region.ClientStack.LindenUDP.LLUDPClient client, System.Byte[] data, Int32 dataLength, PacketType type, Boolean doZerocode, ThrottleOutPacketType category) [0x00060] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/ClientStack/LindenUDP/LLUDPServer.cs:290
# at OpenSim.Region.ClientStack.LindenUDP.LLUDPServer.SendPacket (OpenSim.Region.ClientStack.LindenUDP.LLUDPClient client, OpenMetaverse.Packets.Packet packet, ThrottleOutPacketType category, Boolean allowSplitting) [0x00077] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/ClientStack/LindenUDP/LLUDPServer.cs:265
# at OpenSim.Region.ClientStack.LindenUDP.LLClientView.OutPacket (OpenMetaverse.Packets.Packet packet, ThrottleOutPacketType throttlePacketType) [0x00000] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs:5244
# at OpenSim.Region.ClientStack.LindenUDP.LLClientView.SendCoarseLocationUpdate (System.Collections.Generic.List`1 users, System.Collections.Generic.List`1 CoarseLocations) [0x0012a] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/ClientStack/LindenUDP/LLClientView.cs:3424
# at OpenSim.Region.Framework.Scenes.ScenePresence.SendCoarseLocationsDefault (UUID sceneId, OpenSim.Region.Framework.Scenes.ScenePresence p) [0x000fa] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/Framework/Scenes/ScenePresence.cs:2536
# at OpenSim.Region.Framework.Scenes.ScenePresence.SendCoarseLocations () [0x0000d] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/Framework/Scenes/ScenePresence.cs:2491
# at OpenSim.Region.Framework.Scenes.ScenePresence.Update () [0x00011] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/Framework/Scenes/ScenePresence.cs:2404
# at OpenSim.Region.Framework.Scenes.SceneGraph.UpdateEntities () [0x0001b] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/Framework/Scenes/SceneGraph.cs:164
# at OpenSim.Region.Framework.Scenes.Scene.Update () [0x000dc] in /home/grid/PLAZA/wrightplaza/opensim/OpenSim/Region/Framework/Scenes/Scene.cs:1031 On Region: Wright Plaza
* Allow the UDP server to bind to a user-specified port again
* Updated to a newer version of OpenSimUDPBase that streamlines the code even more. This also reintroduces the highly concurrent packet handling which needs more testing
#2009-10-08 12:58:34,462 ERROR - OpenSim.Application [APPLICATION]:
#APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs
#
#Exception: System.Exception: Object reference not set to an instance of an object. ---> System.NullReferenceException: Object reference not set to an instance of an object.
# at OpenSim.Region.ClientStack.LindenUDP.J2KImage.SendFirstPacket(LLClientView client) in c:\Opensim\OpenSim\Region\ClientStack\LindenUDP\J2KImage.cs:line 230
# at OpenSim.Region.ClientStack.LindenUDP.J2KImage.SendPackets(LLClientView client, Int32 maxpack) in c:\Opensim\OpenSim\Region\ClientStack\LindenUDP\J2KImage.cs:line 84
Mic Bowman