This had stopped working. However, at the moment it still allows the physics flag to be set even though this has no effect. This needs to be fixed.
Default for this flag is true as previously.
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
When a slider parameter is changed, the viewer uploads a new shape (or other asset) and the item is updated to point to it.
Viewer 1 uploaded the data in the initial request itself, so the asset references was almost always correctly updated.
However, viewer 3/2 always uploads data in a subsequent xfer, which exposed a race condition where the viewer would make the item update before the asset had uploaded.
This commit shuffles the order of operations to avoid this race, the item is updated with the new asset id instead of the old one while the upload was still taking place.
A second race had to be fixed where avatar appearance would also be updated with the old asset id rather than the new one.
This was fixed by updating the avatar appearance ids when the appearance was actually saved, rather than when the wearables update was made.
There were a few variables in LocalConsole with single character names, and the class fields did not use the m_ prefix.
I also removed a redundant variable, h. It was being set to 1 in a couple of places, and incremented in another, but never actually used.
Pressing backspace causes hidden input (such as passwords) to be revealed on the console. The echo state was not being taken into account when handling a backspace key press.
This is the message sent to the client when the object is returned.
We were sending byte[0] in the binary bucket. This didn't kill viewer 1 but did terminate viewer 3 (don't know about viewer 2).
So sending "\0" instead.
This is to address http://opensimulator.org/mantis/view.php?id=5683
When a user logs in, the attachment item ids are pulled from persistence in the Avatars table. However,
the asset ids are not saved. When the avatar enters a simulator the attachments are set again. If
we simply perform an item check then the asset ids (which are now present) are never set, and NPC attachments
later fail unless the attachment is detached and reattached.
Hopefully resolves part of http://opensimulator.org/mantis/view.php?id=5653
This was happening because we were using the source avatar's item IDs in the clone appearance.
Switch to using the asset IDs of attachments instead for NPCs.
The InventoryAccessModule and AttachmentModule had to be changed to allow rezzing of an object without an associated inventory item.
Hopefully goes some way towards resolving http://opensimulator.org/mantis/view.php?id=5653
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
This executes the callback on the same thread that made the request. Designed for use only by regression tests that rely on a predicable event ordering.
this is to allow walking on prims. it will be up to the script writer to be sure that there is a continuous path.
currently implemented in osNpcMoveToTarget(), but none of this is final.
This works by serializing and deserializing NPC AvatarAppearance to a notecard in the prim inventory and making the required baked textures permanent.
By using notecards, we avoid lots of awkward, technical and user-unfriendly issues concerning retaining asset references and creating a new asset type.
Notecards also allow different appearances to be swapped and manipulated easily.
This also allows stored NPC appearances to work transparently with OARs/IARs since the UUID scan will pick up and store the necessary references from the notecard text.
This works in my basic test but is not at all ready for user use or bug reporting yet.
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire.
Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this.
Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable.
Arguably, it would be better to do this where data is sent, but doing it here is much easier.
All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517, this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
This is instead of logging "Invalid XML" for all failures, even if they weren't a result of invalid xml.
A default TReponse is returned in the event of a 404, which is the same behaviour as previously.
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does
After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory
When phantom is toggled, the sculptdata is regenerated before remeshing.
But on resize, the sculptdata is not regenerated.
So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store.
This cuts asset library load time from 10 seconds to <1 sec.
Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear.
This is unrelated to this commit and needs to be fixed at some subsequent time.
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format, some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
and currently used for all of an avatars attachments by the other
policies. Also changed the way items are pulled from the update queues
to bias close objects even more.
command to look at the entity update priority queue. Added a "name" parameter
to show queues, show pqueues and show throttles to look at data for a specific
user.
per Melanie's very good suggestion. The immediate queue is
serviced completely before all others, making it a very good
place to put avatar updates & attachments.
Moved the priority queue out of the LLUDP directory and
into the framework. It is now a fairly general utility.
See http://opensimulator.org/mantis/view.php?id=5336
It turns out that viewer 2 was upset by the lack of a response to viv_watcher.php. This would send it into a continuous login loop.
Viewer 1 was quite happy to ignore the lack of response.
This commit puts in the bare minimum 'OK' message in response to viv_watcher.php. This allows viewer 2 voice to connect and appears to work.
However, at some point we need to fill out the watcher response, whatever that is.
Often, by the time the UDPServer realizes that an entity update packet
has not been acknowledged, there is a newer update for the same entity
already queued up or there is a higher priority update that should be
sent first. This patch eliminates 1:1 packet resends for unacked entity
update packets. Insteawd, unacked update packets are decomposed into the
original entity updates and those updates are placed back into the
priority queues based on their new priority but the original update
timestamp. This will generally place them at the head of the line to be
put back on the wire as a new outgoing packet but prevents the resend
queue from filling up with multiple stale updates for the same entity.
This new approach takes advantage of the UDP nature of the Linden protocol
in that the intent of a reliable update packet is that if it goes
unacknowledge, SOMETHING has to happen to get the update to the client.
We are simply making sure that we are resending current object state
rather than stale object state.
Additionally, this patch includes a generalized callback mechanism so
that any caller can specify their own method to call when a packet
expires without being acknowledged. We use this mechanism to requeue
update packets and otherwise use the UDPServer default method of just
putting expired packets in the resend queue.
types of property updates to be specified. Not sure if one form
of property update should supercede another. But for now the old
OpenSim behavior is preserved by sending both.
to the entity update queue. The number of property packets can
become significant when selecting/deselecting large numbers of
objects.
This is experimental code.
However, the calls to the land management module to record prims need to remain, since they were also being used to return owner object lists, etc.
This is probably why prim counts were being done there in the first place.
In order to pass ILandObject into IClientAPI.SendLandProperties(), had to push ILandObject and IPrimCounts into OpenSim.Framework from OpenSim.Region.Framework.Interfaces, in order to avoid ci
Counts are showing odd behaviour at the moment, this will be addressed shortly.
child agents in neighbor regions. This means you can extend
the view on a simulator beyond the default 3x3 regions.
This uses a region default draw distance and should be
replaced at some point by the avatar specified draw distance.
That will require more careful, dynamic recomputation of child
agents every time the draw distance changes.
WARNING: this is experimental and has known instabilities. specifically
all regions "within site" should be running the same default draw distance
or agents will not be closed correctly.
We're putting in a string of format "<region name><x pos floor int><y pos floor int><z pos floor int> which appears to be the expected value.
This resolves http://opensimulator.org/mantis/view.php?id=5356
enters a region the attachments module tries to update the
appearance with attachments that are already part of the appearance.
Just added a check to only save if the attachments weren't there
before.
The config get command shows a current config value on the console.
Now, if <key> is omitted then all the values for the given section are printed.
If <section> is ommitted then all sections and all keys are printed.
Current config can also be dumped to a file using "config save <path>". This can be handy for resolving or eliminating config issues
Made FireAndForgetWrapper a singleton class to allow us to drop
dependancy on the BclExtras35 library. BclExtras is broken in
Mono 2.8.2 and we used the library in only one function.
* Added Calculating Time Dilation in the OdePlubin
* When multiple object updates are stuffed into one packet, average the time dilation between them as a compromise.
* Time Dilation on the update is calculated when the EntityUpdate object is created. The pre-calc-ed TD is stored in the Entity update and used when it goes out on the wire. Previously, it was 1.0 all the time. The time dilation is tied to when the update is created, not when the update is sent.
* Adds an item that checks to see if the top request has been there for longer then 30 seconds without an update and sends an AbortXfer if it encounters one. This allows the client to cancel the Xfer on it's side so you can re-select the prim and get the inventory when it fails the first time.
* Some interesting locking... Using NewFiles to lock the rest of them. We'll see how that goes.
* The goal of this is to ensure that Xfers are restartable when they fail. The client will not do that on it's own.
Remove the too coarse CanEditParcel method in favor of a CanEditParcelProperties
method that takes a GroupPowers argument to specify what action is to be
taken. Also, make the method to set parcel data much more granular. Permissions
in a deeded setting should now work.
also, blank lines are not stored to history
this makes it easier to go back and correct a command which was simply mistyped rather than having to type it out again
save properly, as will the results of a resizer script working. Attachment
positions are no longer saved on each move, but instead are saved once on
logout. Attachment script states are saved as part of the attachment now
when detaching.
midday defaults when no specific LightShare profile is set.
This prevents LightShare info being send out when the region has no LightShare
profile, allowing normal day/night cycles to happen.
Enables RemoteConsole to add the appropriate HTTP header when responding to requests that use Cross-Origin Resource Sharing (CORS with simple requests). The allowed origin is set with configuration option "ConsoleAllowedOrigin" in section [Network]. For a suggestion to make this configuration option more flexible, see the TODO comment in the source code.
The WifiConsole uses this functionality with grid mode.
This will cause visual params to be persisted along with worn items. With
this, alpha and tattoo laters will be saved. Multiple layers MAY work, but
not tested because I don't use Viewer 2.
It contains a major interface version bump and will NOT work with earlier grid
services. This is preliminary work that will lead to layers support.
Rest appearance services are commented out completely, they will have to be
adapted by someone who actually uses them. Remote admin is working, but has
no layers support. There is no layers support in the database. Login likely
won't work. You have been warned.
The attachment code appears to work correctly for 1.23 viewers so, in
spite of some big changes in the internal representation, there don't
appear to be regressions. That being said, I still can't get a viewer2
avatar to show correctly.
* The last 4 commits are a patch from otakup0pe that's supposed to make URLs better somehow in an effort to make it easier to do hypergrid (I think).. But as it seems that I'm the only one who was able to apply the patch.. and I looked it over and it doesn't look like it breaks anything via the diffs.. I'll sign off on it.
Signed-off-by: Teravus Ovares (Dan Olivares) <teravus@gmail.com>
AvatarService -- add two new methods, GetAppearance and SetAppearance
to get around the lossy encoding in AvatarData. Preseve the old
functions to avoid changing the behavior for ROBUST services.
AvatarAppearance -- major refactor, moved the various encoding
methods used by AgentCircuitData, ClientAgentUpdate and
ScenePresence into one location. Changed initialization.
AvatarAttachments -- added a class specifically to handle
attachments in preparation for additional functionality
that will be needed for viewer 2.
AvatarFactory -- removed a number of unused or methods duplicated
in other locations. Moved in all appearance event handling from
ScenePresence. Required a change to IClientAPI that propogated
throughout all the IClientAPI implementations.
Set the projection parameters in the host prim ...
osSetProjectionParam(bool Enabled,
key TextureMaskUUID,
float FOV,
float Focus,
float Ambiance);
Set the projection parameters in a target prim ...
osSetProjectionParam(ikey target uuid,
bool Enabled,
key TextureMaskUUID,
float FOV,
float Focus,
float Ambiance);
Threat Level very high
Signed-off-by: Melanie <melanie@t-data.com>
The formatting of lines with the help of a regular expression match will be done only for output with an explicitly given logging level.
This fixes the issue of colons being added to help texts on the local console.
* Added MundaneFrameworkTests.cs for the really mundane tests like testing properties,constructors, etc in OpenSim.Framework.
* Fixed LeftAxis and UpAxis unpacking from OSD to AgentPosition (copy and paste error caught while writing mundane test) (Good thing nobody uses the camera frustum from remote regions yet)
* Removed StorageManager
* CONFIG CHANGE: There are no more database settings in OpenSim.ini. Check the config-include configuration files for region store and estate store database settings
Reverting mostly because of the texture asset files that got committed and cause grief with the 0.7-post-fixes branch. But also because I'm going to go at those mantises in another way.
This reverts commit e47608fc62.
Recent libomv update broke the json serialization for
XStats. This uses String.Format to convert all data to
strings with fixed decimal (2 places ), or integer formats
as appropriate.
THIS CHANGE ALTERS THE SERIALIZATION FORMAT, HOPEFULLY FOR THE LAST TIME. If you're testing, please start with a new database.
This commit also improves locking for manipulation of media entries.
using an OSD serialization rather than auto forces serialization code to be placed in OpenSim.Framework
this makes the media texture raw data staging post in PrimitiveBaseShape redundant, now we just directly call the code in PrimitiveBaseShape.MediaList itself
THIS WILL BREAK ANY EXISTING MEDIA TEXTURE SERIALIZATIONS. If you're testing this, please start with new databases.
This makes media textures serialized in the same way, which is probably better in the long term.
This is better modularity. It also allows MoapModule to be replaced with some other media module that may behave completely differently in the future.
Remaining non-modularity:
PrimitiveBaseShape needs explicit Media and MediaRaw fields. MediaRaw is required in order to shuttle the pre-serialization data back and forth from the database layer.
The database also needs to know about MediaRaw though not about Media.
IMO, it would be extremely nice to remove these hard codings but this is a bridge too far at the present time.
This allows the media texture to persist in memory - logging in and out will redisplay it (after a click) though navigation will be lost
Next need to implement media uri on prim and delegate more incoming llsd parsing to libomv
currently, for smoe reason the page only appears when you click a face.
also, actually navigating anywhere always snaps you back to the google search box, for some unknown reason
you can still change the url and normal navigation will work again
When this switch is used, iar folders are merged with existing same-name user inventory folders.
This makes it a little easier to back and restore entire individual user inventories, among other things
Added unit test to check behaviour
Justin Clark-Casey (justincc)