When this switch is used, iar folders are merged with existing same-name user inventory folders.
This makes it a little easier to back and restore entire individual user inventories, among other things
Added unit test to check behaviour
refers to prim OWNERS. A new option set, Creators_, is added to allow
selection by script creator. For existing installs, this means no functional
change. The warning from my prior commit doesn't apply anymore.
would be the IDs of the prim owners in whose prims these functions would
run. This changes it so the UUID is the SCRIPT CREATOR instead. Further,
osfunctions limited by uuid will not run if the creator and owner differ
and the owner has mod rights on the script.
There is still a danger in passing moodifiable scripts to others, as they
can insert a harmful function, then remove the mod rights to make it runnable.
As before, care needs to be taken, but where it was modable prims that were
the risk before, modable scripts are the weak spot now.
In cases where prim owner == script creator == script owner, nothing will
change.
Unfortunately, this meant publicly exposing the underlying service for the connector.
The other solution would be to create alternative initializers for services and connectors where objects could be given directly rather than loaded indirectly through config.
Unfortunately, this would require a lot of work in this case but might be the better way forward.
Fixes: Undo, T-pose of others on login, modifiedBulletX works again, feet now stand on the ground instead of in the ground, adds checks to CombatModule. Adds: Redo, Land Undo, checks to agentUpdate (so one can not fall off of a region), more vehicle parts. Finishes almost all of LSL (1 function left, 2 events).
Direct flames and kudos to Revolution, please
Signed-off-by: Melanie <melanie@t-data.com>
This merge was very conflicted. I think I got them all, but I can't be sure.
I had to merge to master or risk divergence to the point of unmergeability.
* Cleans redundant information out of the Simulator Version. Versions now look like:
"OpenSimulator 0.6.9(dev) Unix/Mono"
* [Minor] additional log info for MySQLInventoryData
script messages to region modules and sending back replies.
Hook IScriptModuleComms.OnScriptCommand to see commands and use
DispatchReply to reply to the script. It is recommended to pass the "id"
parameter from the event as the "k" parameter of the reply.
The script will receive the reply as a link message from link -1.
When I attempt to 'save oar' on a region with thousands of scripts with timers, I get a NullReferenceException every time. The problem comes from inconsistent locking in SensorRepeat.cs of the SenseRepeaters List. It is iterated and modified in many places and these places are all wrapped in a lock except in the GetSerializationData(). This is the function throwing the exception because an item in the list becomes null during iteration.
The attached patch locks SenseRepeatListLock in GetSerializationData()
* Shrinks the largest in-memory object, the LLRAW.HeightmapLookupValue struct (only used for exporting to LLRAW terrain files), to the minimum possible size. This seems to have the odd side effect of cutting the size of the two double[256,256] terrain objects in half. Possibly an alignment optimization?
there is only one element in the range, it must
also coincide with the specified stride. The
existing code assumes that the stride starts at
start ( which is the expected and most useful
behavior).
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
Http-in and makes the host name for URL generation configurable.
Applied with changes:
llGetSimulatorHostname was not changed, because the change breaks
existing behavior and carries a data exposure risk. That value needs
to be configurable, the proposed fixed change is not acceptable.
This patch allows the land owner to dynamically set the SIP address of a particular land parcel from script. This allows predetermined SIP addresses to be used, making it easier to allow non OpenSim users to join a regions voice channel.
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
association. Then, whenever there is an llSay to that channel,
the message is directed to the OpenSim console log (and NOT
forwarded to the client). This is a great way to capture scripting
events to the log. To enable, add ScriptConsoleChannel = -xxx to
the ScriptEngine parameters in the .ini file. Note that the
message is written using Console.WriteLine rather than
the rather more fragile log4net service. The console channel is
also not subjected to the 1024 character limit imposed on regular
say traffic.
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
implementation. If the range included only a single item
an empty list was always returned (has no-one been using
this function?)
Signed-off-by: dr scofield (aka dirk husemann) <drscofield@xyzzyxyzzy.net>
This needs to be looked into. This commit, unfortunately, reinstates
a memory leak in regions that see significant script fluctuation,
e.g. lots of scripted attachments, or script development.
Fixes Mantis #3979
Applied with changes. Changed ThreatLevel to High since all discovery
functions are a high threat. Overriding that is the responsibility
of the grid owner.
|Date: Wed, 5 Aug 2009 09:51:52 -0700
|Subject: [PATCH] Closed two major memory leaks for scripted objects
|
|Two major memory leaks for the scripted objects were fixed
|- One leak had to do with remoting acrossing app domains. When a script and
| its controlling agent communicate across an application boundary, it calls
| functions on a stub proxy object that then invokes the remote method on
| the object in the other app domain. These stub objects (two for each script)
| were setup to have infinate lifetimes and were never being garbage collected.
|- The second leak was the result of adding a scene object part instance method
| to a scene event and never removing it. This cause the event's delegate list
| to maintain a link to that object which is then never freed as the scene event
| object is never destroyed.
Patch applied, please direct feedback to me. Possible issue: Longtime idle
scripts like vendors may fail.
The vector parameter to llSetPos() specifies an absolute position for
an unlinked prim or the root prim of a linkset; however, when the
function is used by a child prim, the vector specifies a relative
offset from the root prim. The changed introduced in llSetPos() treats
this value as an absolute position in all cases, which has the unintended
effect of mangling the position of child prims.
balancer plugin work again. Create a new method, GetClientEP, to retrieve
only the EndPoint for script usage. Marked the purpose of the method
in IClientAPI.cs with a warning. Also restored the corresponding SetClientInfo
functionality.
Attached is a patch that changes the oar file saving of creation date/time to an integer
instead of a string. I did this after justincc emailed me saying there is a problem
with internationalisation doing it the old way and I said I'd fix it. Its been
tested with MySQL and I've made the changes for MSSQL but that hasn't been well tested.
This change addresses two issues:
[1] It adds a flag field to the blendface call which allows the
caller to indicate whether or not the generated asset is
temporary, and whether or not the asset being replaced should
be explicitly retired fromt the memory cache. The decimal
values correspond to:
0 - Permanent asset, do not expire old asset
1 - Permanent asset, expire old asset
2 - Temporary asset, do not expire old asset
3 - Temporary asset, expire old asset
'3' corresponds to the default behavior seen today, and is
the continued behavior of the non-blendface calls.
[2] The dynamic texture routines are highly-asynchronous and can
be scheduled simultaneously on a multi-core machine. The nature
of the texture management interfaece is such that updates may
be lost, and the nature of asynchornous operation means that
they may be processed out of order. A lock has been added to
ensure that updates are at least atomic. No attempt has been
made to enforce ordering. The lock applies to the SceneObjectPart
being updated and is held for the lifetime of the TextureEntry
used to carry texture updates (the one instance carries all
faces supported by the prim).
Users of these services should remember that the dynamic texture
call is asynchronous and control will be returned *before* the
texture update has actually occurred. As a result, a isubsequent
GetTexture call may not return the expected asset id. A script
must wait for the corresponding TEXTURE_CHANGED event before
retrieving any texture information.
This patch adds oar file date and time (UTC) meta data to an oar file
when it is created. It also adds a unique ID, though this id does not
in anyway identify the machine that the oar file was created on.
When an oar file with this meta data is loaded this extra information
is saved with the region settings and available via LSL through:
- osLoadedCreationDate()
- osLoadedCreationTime()
- osLoadedCreationID()
If there is no meta data these fields will be blank. Subsequent oar
file loads will erase the information for the previous oar file
load. Persistence has only been implemented for MySQL, the other
backends need updating.
Overall this allows us to much more easily identify the specific version of
software that clients are using. Its very straightforward to edit the oar file
to change the ID string to be something more human friendly.
Included in the patch is a new file OpenSim/Data/MySQL/Resources/030_RegionStore.sql
required for the MySQL DB migration.
btw I had a chat with justincc about this a few weeks ago since he
wrote the oar file import/export and he sounded happy to accept
something that included date/time information but didn't want anything
that would silently leak private information like machine names.
The attached patch implements llPassTouches. It has been added
to the export/import XML along with the flag for AllowedInventoryDrop.
The MySQL backend has been updated as well, though I haven't
done one of those before so could do with a check. I added
the migration mysql file as well.
The other data backends need updating as well.
The attached patch implements llPassTouches. It has been added
to the export/import XML along with the flag for AllowedInventoryDrop.
The MySQL backend has been updated as well, though I haven't
done one of those before so could do with a check. I added
the migration mysql file as well.
The other data backends need updating as well.
Changes to support client-side image pre-caching in the region. This
commit adds an additional calling sequence to the DynamicTexture data
and URL calls. The new interface allows a dynamic image to be loaded
into a specific object face (rather than the mandatory ALL_SIDES
supported today.
This is in part fulfilment of ticket #458.
This may break a lot of things, but it needs to go in. It was tested in standalone and the UCI grid, but it needs a lot more testing.
Known problems:
* HG asset transfers are borked for now
* missing texture is missing
* 3 unit tests commented out for now
This is to handle the changes in the v1.23 viewer
of LL regarding the adult rating. With this patch
a region can be changed to the adult rating from
LL viewer v1.23 and above.
- AssetType isn't InventoryType. Those enums contain different numbers. Use AssetType for the asset type, InventoryType for the inventory type.
- The ToString method (or ToLower) of AssetType/InventoryType doesn't necessarily return the correct LLSD string.
- Replaced several magic numbers by their corresponding enum.
- Fixed the invType for gestures and animations in the library.
This should fix Mantis #3610 and the non-terminating inventory loading
that region. I decided against sending the terrain on every call to osTerrainSetHeight
(which makes it abysmally slow), and added a osTerrainFlush instead, which should be
called after all the terrain-changes have been done. Changed some return types to
LSL types, too, and removed some end-of-line spaces.
The attached patch implements osKey2Name and osName2Key
which converts between a UUID key for an avatar and
an avatar name and vice-versa.
osKey2Name is similar to llKey2Name except that it will work
even if the avatar being looked up is not in the same region
as the script.
This Fixes Mantis #3331
Also corrected the capping calculation in llApplyImpulse and several integer "boolean" comparisons from "== 1" to "!= 0" for true
With some support from HomerH, this patch adds support for Wind
Model plugins via the mono.Addin framework.
* Adds console & OSSL access to Wind Parameters
* Adds plug-in support for custom wind models
* Provides two example Wind Model plug-ins
Documentation for the wind module is temporarily located at http://code.google.com/p/flotsam/wiki/CoreWindModule [^]
-- will move this documentation to http://opensimulator.org [^]
after the patch has been committed.
* Important: HttpServer.dll was changed to HttpServer_OpenSim.dll so that the HttpServer references do not conflict if you've copied the OpenMetaverse.Http.dll and requirements to the OpenSimulator bin folder.
This means that if you reference HttpServer.dll in any projects, you will need to change the reference to HttpServer_OpenSim.dll. It still uses the Same HttpServer namespace though.
Attached is a patch which enabled through an OpenSim.ini option the ability
to read long notecard lines. Currently although the data is read from
the notecard it is truncated at 255 characters (same as for the LL servers.
This patch allows the setting of that limit to a different value.
; Maximum length of notecard line read
; Increasing this to large values potentially opens
; up the system to malicious scripters
; NotecardLineReadCharsMax = 255
this allows for save/restore functionality using notecards without
having to worry about very short line length limits.
Attached is a patch which provides osAvatarPlayAnimation() the ability to
also trigger animations contained within the same prim as the script, as
llStartAnimation() does. (It also modifies osAvatarStopAnimation(),
otherwise the script wouldn't be able to stop animations it had started.)
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
Also truncate messages that may exceed the limit set by the packet size. The limit in OpenMetaverse is 1100 bytes including a zero byte terminator.
Fixes Mantis #3244
llSetHoverHeight() should not clamp the x/y position of an object the way MoveTo does,
and it should recalculate the absolute height to hover at as an object moves to reflect
the current ground/water height under it.
Correctly implementing required adjusting the Physics interfaces and implementing at
the physics plug-in level. The attached is a patch that correctly implements
llSetHoverHeight() including updates to the ODE physics plug-in.
Changes to IWindModule interface: Change from assuming a single array of
256 Vector2 values to a lookup function that takes region x, y, z and returns a Vector3
* Changed llWind() to use new lookup method of IWindModule
* Moved logic for determining the wind at a given point in the data array from
llWind() to the Wind Module itself.
isn't tested, but it doesn't break anything else. The reason for this
function is to let in world tools be used to coordiante out of world
network services that need access to client ip addresses.
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
The built-in default is OpenSim, unless a user server url is given, then
that is used, unless "shard" is also goven, then shard takes precedence.
The defult in OpenSim.ini is "OpenSim" for compatibility.
* Not locking causes enumeration exceptions as described in this matis
* part.TaskInventory needs to be locked for every access as it's a dictionary
* Extra locking will hopefully not cause any major issues - in places where the enumeration of the dictionary performs other lock or long running operations, the dictionary is
cloned instead
The attached patch implements osGetDrawStringSize that looks like:
vector osGetDrawStringSize(string contentType, string text, string
fontName, int fontSize)
in LSL. It is meant to be used in conjunction with the osDraw*
functions. It returns accurate information on the size that a given
string will be rendered given the specified font and font size.
This allows for nicely formatted and positioned text on the generated
image.
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
The following patch fixes http://opensimulator.org/mantis/view.php?id=3107
[^] by changing call from setRot to llSetRot, the later handles
child prim being rotated relative to root prim in linked set.
In SL if llAbs() is called with the minimum integer value of -2147483648
it will return that value untouched without error.
this patch replicates the SL functionality.
OpenSim currently throws an overflow exception: number too small under
mono or a "System.OverflowException: Negating the minimum value of a
twos complement number is invalid. " under .NET
NOTHING has been deleted or moved off to forge at this point. what
has happened is that OpenSim.Region.Environment.Modules has been split
in two:
- OpenSim.Region.CoreModules: all those modules that are either
directly or indirectly referenced from other OpenSim packages, or
that provide functionality that the OpenSim developer community
considers core functionality:
CoreModules/Agent/AssetTransaction
CoreModules/Agent/Capabilities
CoreModules/Agent/TextureDownload
CoreModules/Agent/TextureSender
CoreModules/Agent/TextureSender/Tests
CoreModules/Agent/Xfer
CoreModules/Avatar/AvatarFactory
CoreModules/Avatar/Chat/ChatModule
CoreModules/Avatar/Combat
CoreModules/Avatar/Currency/SampleMoney
CoreModules/Avatar/Dialog
CoreModules/Avatar/Friends
CoreModules/Avatar/Gestures
CoreModules/Avatar/Groups
CoreModules/Avatar/InstantMessage
CoreModules/Avatar/Inventory
CoreModules/Avatar/Inventory/Archiver
CoreModules/Avatar/Inventory/Transfer
CoreModules/Avatar/Lure
CoreModules/Avatar/ObjectCaps
CoreModules/Avatar/Profiles
CoreModules/Communications/Local
CoreModules/Communications/REST
CoreModules/Framework/EventQueue
CoreModules/Framework/InterfaceCommander
CoreModules/Hypergrid
CoreModules/InterGrid
CoreModules/Scripting/DynamicTexture
CoreModules/Scripting/EMailModules
CoreModules/Scripting/HttpRequest
CoreModules/Scripting/LoadImageURL
CoreModules/Scripting/VectorRender
CoreModules/Scripting/WorldComm
CoreModules/Scripting/XMLRPC
CoreModules/World/Archiver
CoreModules/World/Archiver/Tests
CoreModules/World/Estate
CoreModules/World/Land
CoreModules/World/Permissions
CoreModules/World/Serialiser
CoreModules/World/Sound
CoreModules/World/Sun
CoreModules/World/Terrain
CoreModules/World/Terrain/DefaultEffects
CoreModules/World/Terrain/DefaultEffects/bin
CoreModules/World/Terrain/DefaultEffects/bin/Debug
CoreModules/World/Terrain/Effects
CoreModules/World/Terrain/FileLoaders
CoreModules/World/Terrain/FloodBrushes
CoreModules/World/Terrain/PaintBrushes
CoreModules/World/Terrain/Tests
CoreModules/World/Vegetation
CoreModules/World/Wind
CoreModules/World/WorldMap
- OpenSim.Region.OptionalModules: all those modules that are not core
modules:
OptionalModules/Avatar/Chat/IRC-stuff
OptionalModules/Avatar/Concierge
OptionalModules/Avatar/Voice/AsterixVoice
OptionalModules/Avatar/Voice/SIPVoice
OptionalModules/ContentManagementSystem
OptionalModules/Grid/Interregion
OptionalModules/Python
OptionalModules/SvnSerialiser
OptionalModules/World/NPC
OptionalModules/World/TreePopulator
line editing, context sensitive help (press ? at any time), command line
history, a new plugin command system and new appender features thet let you
type while the console is scrolling. Seamlessly integrates the ICommander
interfaces.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
Justin Clark-Casey (justincc)