d2d1c63b17
Revert "Catch meshing error in Meshmerizer"
...
This reverts commit 8f2986bc6a
2010-08-03 05:25:01 +02:00
8f2986bc6a
Catch meshing error in Meshmerizer
2010-08-02 21:54:47 -07:00
236c0f8e8b
Fix llSetForecAndTorque([0]) stops linear motion. Mantis #187
2010-07-16 22:17:06 +00:00
7ab103c96f
Rewrite collision dictionary handling, cleans up deleted obects/avs. Fixes occasional collision event failure. ChOde only.
2010-07-13 20:37:13 +00:00
ba38c697e8
Merge branch 'master' into careminster-presence-refactor
2010-06-27 20:05:55 +01:00
4a5979c311
minor: remove some mono compiler warnings
2010-06-25 21:09:15 +01:00
04b60aa490
Merge branch 'master' into careminster-presence-refactor
2010-06-19 20:32:01 +01:00
1e7ce6dbce
Hunting for the problem in #4777
2010-06-19 09:44:02 -07:00
9b410f5e94
Reverting my last two commits, putting back Melanie's exception handler. Doesn't solve #4777 .
2010-06-19 09:25:36 -07:00
f0f684161e
Reinstated the behavior of AddPrimShape *exactly* as it was as of December. Trying to fix mantis #4777
2010-06-19 08:57:58 -07:00
891214c65b
Merge branch 'master' into careminster-presence-refactor
2010-06-18 20:49:21 +01:00
47d5f90629
Remove an error in meshing error reporting. Now doesn't double-bomb
...
anymore on a bad sculpt
2010-06-18 19:49:14 +01:00
d2342319da
Merge branch 'master' into careminster-presence-refactor
2010-06-12 16:27:37 +01:00
ceac35bac1
Log and eat sculpt meshing exceptions caused by bad jp2 data.
2010-06-12 16:25:40 +01:00
6e2cc98eac
Fixed llMoveToTarget() and Rotation Lock/Enable (ChODE/ODEPrim only)
2010-06-08 16:15:16 -04:00
97501495eb
Merge branch 'master' into careminster-presence-refactor
2010-05-26 17:19:02 +01:00
5e719d13ef
fix sculpt normal direction for mirrored plane sculpts
2010-05-24 19:15:04 -07:00
420dd78fb7
Merge branch 'careminster' into careminster-presence-refactor
2010-05-08 14:17:43 +01:00
14fcc2510e
Merge branch 'master' into careminster-presence-refactor
2010-05-08 13:31:36 +01:00
a58859a0d4
GridUserService in place. Replaces the contrived concept of storing user's home and position info in the presence service. WARNING: I violated a taboo by deleting 2 migration files and simplifying the original table creation for Presence. This should not cause any problems to anyone, though. Things will work with the new simplified table, as well as with the previous contrived one. If there are any problems, solving them is as easy as dropping the presence table and deleting its row in the migrations table. The presence info only exists during a user's session anyway.
...
BTW, the Meshing files want to be committed too -- EOFs.
2010-05-07 21:29:56 -07:00
add7abc1de
Fix Mouse+WASD makes Av rise; Fix PREJUMP.
2010-05-07 14:12:07 -04:00
eb6d63ab8e
improve handling of undersize sculpt textures
2010-05-06 23:02:24 -07:00
39c5ddc837
corrections for face numbering and uv mapping, mostly for spheres - sync with PrimMesher r56
2010-05-06 22:08:59 -07:00
5d1e9947ed
Sculpt meshing refactoring - improves mesh accuracy and UV mapping
...
Sync with PrimMesher r55
2010-05-06 21:36:27 -07:00
f3c21524be
Fix Av jump motion S/W
2010-04-29 19:41:08 -04:00
f06772a088
Merge branch 'careminster' into careminster-presence-refactor
2010-04-29 23:33:20 +01:00
5c23b4aa56
Fix vertical attractor
2010-04-29 13:50:11 -04:00
9920e219dd
Merge branch 'careminster' into careminster-presence-refactor
2010-04-13 04:36:08 +01:00
9b6e89457c
Fixed LINEAR_MOTOR Z drive, Mantis #30
2010-04-11 14:12:01 -04:00
ba31b31ed0
Merge branch 'careminster' into careminster-presence-refactor
2010-04-05 18:22:15 +01:00
e2a521742a
ChODE Only: Corrected Heightmap load to iliminate crack at 255M. Added 'fence' option to prevent physical objects crossing region border.
2010-04-04 22:57:32 -04:00
add47befac
Update acceleration to 0 on no tphysical.
2010-03-19 18:53:16 -04:00
4c2a51b1b5
Merge branch 'master' into careminster-presence-refactor
2010-03-18 20:09:04 +00:00
65c1fbc14d
Fixing line endings
2010-03-15 20:54:48 -07:00
d3f33acc1a
Merge branch 'master' into careminster-presence-refactor
2010-03-15 17:23:35 +00:00
8198062610
RotLookAt repaired; debug msg cleanup.
2010-03-14 16:22:13 -04:00
1e73e16fd0
flip UVs for profile faces
2010-03-13 18:41:36 -08:00
41a98b902b
correct some references which could produce erroneous prim face numbers
2010-03-12 22:05:22 -08:00
1d14cf8c3f
some improvements to sculptmap alpha handling and LOD
2010-03-12 21:21:28 -08:00
3036aba875
* Added a better check to the SimianGrid connectors to test if they are enabled or not. This method should work equally well with standalone or robust mode
...
* Applying #4602 from Misterblu to add collision detection to BulletDotNET
2010-03-12 14:28:31 -08:00
1379ae4310
Fix Rotation Lock. NOTE: This version had poor border crossing control
2010-03-12 16:13:52 -05:00
7bd48d383d
Resolved merge
2010-03-12 13:48:31 -05:00
f6f6ef1532
Dynamics Integration Part 1
2010-03-11 19:12:38 -05:00
2fdd535302
Merge branch 'master' of ssh://melanie@3dhosting.de/var/git/careminster into careminster
2010-03-06 12:24:26 +00:00
1f7a0cf892
Merge branch '0.6.9-post-fixes' into careminster
2010-03-06 12:24:09 +00:00
87590491b5
Fix Physics angular reference frame.
2010-03-04 16:33:26 -05:00
300f4c58a6
Separate PhysX classes into separate files.
2010-02-22 13:16:40 +09:00
af265e001d
Formatting cleanup.
2010-02-15 19:21:56 +09:00
9821c4f566
Revolution is on the roll again! :)
...
Fixes: Undo, T-pose of others on login, modifiedBulletX works again, feet now stand on the ground instead of in the ground, adds checks to CombatModule. Adds: Redo, Land Undo, checks to agentUpdate (so one can not fall off of a region), more vehicle parts. Finishes almost all of LSL (1 function left, 2 events).
Direct flames and kudos to Revolution, please
Signed-off-by: Melanie <melanie@t-data.com>
2010-02-14 22:18:46 +00:00
9568718add
Angular motor adjustments
2010-02-12 15:56:21 -05:00
6a70349512
Merge branch 'master' of ssh://3dhosting.de/var/git/careminster
2010-02-12 14:08:32 -05:00
c8f3bb56ff
Merge branch 'master' into careminster
2010-02-08 22:11:38 +00:00
8556a9f1a8
Applying patch #4534 by Misterblue to fix ODE physics stickiness
2010-02-04 13:31:06 -08:00
48134af616
Motor angular decay fix.
2010-02-03 16:20:13 -05:00
8c20610293
AngMotor update 1
2010-02-02 13:28:42 -05:00
1abb70cc73
Add glue for llSetVehicleFlags(), llRemoveVehicleFlags(). ChODE: Add associated methods.
2010-01-21 19:31:02 -05:00
66692f90e3
ChODE Object Linear Motion update
2010-01-21 14:39:11 -05:00
253e2ed699
Merge branch 'master' of ssh://3dhosting.de/var/git/careminster
2010-01-03 23:10:01 -05:00
61ce884336
Merge branch 'master' into careminster
2010-01-03 21:43:39 +00:00
70d5b1c34c
Formatting cleanup. Add copyright headers.
2010-01-04 06:17:30 +09:00
3f901d313b
Vehicle Linear parameter adjustments
2009-12-31 16:07:36 -05:00
e7439efc74
Recover out-of-region objects during db load.
2009-12-24 19:19:44 -05:00
93b930b937
Fix conflicts
2009-12-22 00:33:31 -05:00
0a29842caf
Include ChOdePlugin
2009-12-22 00:20:04 -05:00
fa0621b486
Merge branch 'master' into careminster
2009-12-22 00:41:56 +00:00
e530180c1e
Glue code for a couple of new LSL function implementations
2009-12-22 00:26:12 +00:00
6483470ec5
Fix GetWorldRotation(), and a host of related Sit fixes.
2009-12-17 02:54:02 -05:00
b310efc50f
Merge branch 'master' into careminster
2009-12-12 12:54:43 +00:00
2f8b9cbf2b
* Commit some sit code that's commented out for now.
2009-12-08 11:28:13 -05:00
09bbfc1d56
Merge branch 'master' into careminster
2009-12-06 03:01:58 +00:00
8d196dbd14
* Adds Normal to the fields returned by the Physics Raycaster
...
* Fixes recognizing when a sit target is and isn't set.
* * 1. Vector3.Zero.
* * 2. Orientation: x:0, y:0, z:0, w:1 - ZERO_ROTATION
* * (or) Orientation: x:0, y:0, z:0, w:0 - Invalid Quaternion
* * (or) Orientation: x:0, y:0, z:1, w:0 - Invalid mapping, some older objects still exist with it
2009-12-05 22:18:00 -05:00
43a6fa1d01
Merge branch 'master' into careminster
2009-12-05 19:53:54 +00:00
c4b6010fb3
* Fixes mantis 4416. Animator is dereferenced on logout
2009-12-05 13:01:21 -05:00
781db43a76
* Fixes the 10x10x10 hard physics limitation. (wierdly, you have to set this for each region in your Regions.ini[PhysicalPrimMax = 10(default)])
...
* Adds a configurable maximum object mass before the mass is clamped. Default is 10000.01. Configurable by changing maximum_mass_object in the [ODEPhysicsSettings] section.
* Clamping the mass is important for limiting the amount of CPU an object can consume in physics calculations. Too high, and the object overcomes restitution forces by gravity alone. This generates more collisions potentially leading to 'deep think'.
2009-12-03 20:21:10 -05:00
cc18ab12f8
Merge branch 'master' into careminster
2009-11-27 00:40:56 +00:00
e2200026ca
* Fixes a case of d.BodyEnable with IntPtr.Zero passed as the parameter in linkset where EnableBody was called and the body is immediately disabled. The previous functionality assumed that a body was received in EnableBody but.. in some cases, it wasn't.
2009-11-26 17:03:00 -05:00
cad2bf5b08
Merge branch 'master' into careminster
2009-11-24 16:00:35 +00:00
3ebb528c79
* Resolves mantis 4390 http://opensimulator.org/mantis/view.php?id=4390
2009-11-23 11:44:22 -05:00
df121a7cd0
Merge branch 'master' into careminster
2009-11-23 04:24:58 +00:00
21f80b6507
* Adds a test for if the collision is at the bottom of the capsule on avatar. This prevents the 'double jump' capability that's been occurring for ages when avatar collide with prim on the side.
2009-11-22 22:04:52 -05:00
9ba10af6b2
* Added missing lock to m_forcelist when AddForce is called. When a user dragged a prim, in some cases, it would corrupt the datatype in memory and throw spurious IndexOutOfRangeExceptions.
...
* Physics a situation that causes physics to spew redline messages to the console forever.
2009-11-22 21:08:54 -05:00
0844e5951c
Merge branch 'master' into careminster
2009-11-21 16:00:18 +00:00
7760da1a4c
* Fixes the second of two terse update issues. Physical objects should react normally again.
2009-11-21 04:39:41 -05:00
0ffda7128e
* Fixes one of two terse update issues. There's still one left, but this one fixes the situation where the object on the server is moving but no updates are being sent.
2009-11-21 04:33:34 -05:00
7f0f5060ec
Clean up messages in ODE
2009-11-19 20:13:26 +01:00
4c10826caa
Fix merge conflicts
2009-11-16 02:12:56 +01:00
873c9098d8
Merge branch 'careminster' into tests
2009-11-16 01:40:15 +01:00
8ae3df22a2
clean up some cruft
2009-11-11 11:10:42 -08:00
6d88c96e01
minor: remove mono compiler warning
2009-11-11 18:49:05 +00:00
3e22bb24f5
add an overload to _SculptMesh for meshing from a list of coordinates
...
add conditional compilation for System.Drawing dependency
2009-11-09 18:44:03 -08:00
a88a463b50
Following various discussions on irc and in the OpenSim dev OSGrid meeting last week, change av_capsule_tilted to false by default
...
This appears to now give better ODE physics response (less sinking into the ground, etc.)
Please change it back if this is actually a bad idea for some reason
2009-11-09 19:26:42 +00:00
3274bc39c8
minor: remove some mono compiler warnings
2009-11-09 17:43:32 +00:00
af0e5d0974
Merge branch 'master' of ssh://justincc@opensimulator.org/var/git/opensim
2009-11-03 19:11:09 +00:00
1d737b010c
minor: remove some mono compiler warnings
2009-11-03 18:52:20 +00:00
82554e9a89
Delete depricated extrusion methods and redirect to universal extrude method.
...
Sync with PrimMesher.cs r47 on forge.
2009-11-02 22:24:58 -08:00
7132877075
* Log progress messages when loading OAR files with a lot of assets
...
* Change the PhysicsCollision callback for objects to send full contact point information. This will be used to calculate the collision plane for avatars
* Send the physics engine velocity in terse updates, not the current force being applied to the avatar. This should fix several issues including crouching through the floor and walking through walls
2009-10-29 01:46:58 -07:00
1c9696a9d2
Always send a time dilation of 1.0 while we debug rubberbanding issues
2009-10-28 15:11:01 -07:00
a069a1ee68
Limit physics time dilation to 1.0
2009-10-28 14:44:05 -07:00
a65c8cdc38
* Reduce the velocity tolerance on sending terse updates to avoid slowly drifting prims/avatars
...
* Added contacts_per_collision to the ODE config section. This allows you to reduce the maximum number of contact points ODE will generate per collision and reduce the size of the array that stores contact structures
2009-10-28 12:45:40 -07:00
ee0f7e10c8
Fixed a bad check on velocity in the ODE near() callback (it was only checking for velocity in certain directions, and was calling the get_Velocity() function three times)
2009-10-28 12:20:34 -07:00
2d470f8bde
Switching sculpty from CSJ2K back to OpenJPEG for now until more kinks are ironed out
2009-10-28 01:48:53 -07:00
e31024f08b
Print the exception message when CSJ2K decoding fails for sculpty textures
2009-10-28 01:30:39 -07:00
0c466b28bb
Move the calculation of time dilation from the scene to the physics engine. The scene is still the one reporting dilation so this does not break the API or remove flexibility, but it gets the calculation happening in the right place for the normal OpenSim usage. The actual calculation of physics time dilation probably needs tweaking
2009-10-27 16:24:43 -07:00
1113b3b6eb
Merge branch 'vehicles' into tests
...
Conflicts:
OpenSim/Region/Physics/Manager/PhysicsActor.cs
OpenSim/Region/Physics/OdePlugin/ODEPrim.cs
2009-10-27 22:42:55 +01:00
a81a16f22f
llRotLookAt Pt 2
2009-10-27 19:56:39 +01:00
f5cad91578
* Switched from OpenJPEG to CSJ2K in Meshmerizer
...
* Tested the previous patch and found no regressions
2009-10-26 19:03:55 -07:00
d199767e69
Experimental change of PhysicsVector to Vector3. Untested
2009-10-26 18:23:43 -07:00
119cf80e13
Added calls to GC.AddMemoryPressure() when unmanaged memory is allocated for ODE (helps the GC make better scheduling choices), and a call to GC.Collect() right before logins are enabled for a region. Although this doesn't change actual memory usage, it improves the reported usage from OpenSim and the operating system
2009-10-26 15:52:59 -07:00
428bd7a74b
No need to create dupe TriMeshData for ODE. A previous patch created a dictionary to store unique meshes in Meshmerizer based on creation params. This patch contains a dictionary to map each of those unique meshes to its ODE TriMeshData. This eliminated hundreds of megabytes of memory consumption in the unmanaged heap when there are lots of the same prim (roof tiles, bricks, siding, decks, chairs, etc). The objects do not need to be physical to benefit from this patch.
2009-10-26 15:14:19 -07:00
ff4b45a1e3
Do case-insensitive comparisons on region names in LLStandaloneLoginModule
2009-10-26 15:12:43 -07:00
ac7ccdf7d7
* Changed the watchdog timer to improve the speed of UpdateThread(), only track threads once the first call to UpdateThread() has been made, and allow re-tracking of threads that timed out but revived later
...
* Added a commented out call to Watchdog.UpdateThread() in OdeScene. If it turns out that loading a large OAR file or some other operation is timing out the heartbeat thread, we'll need to uncomment it
2009-10-26 14:41:27 -07:00
8428b25939
Add llRotLookat pt1.
2009-10-26 00:10:23 +01:00
730930955a
Changing Scene.ForEachClient to use the synchronous for loop instead of Parallel. This is quite possibly the source of some deadlocking, and at the very least the synchronous version gives better stack traces
...
* Lock the LLUDPClient RTO math * Add a helper function for backing off the RTO, and follow the optional advice in RFC 2988 to clear existing SRTT and RTTVAR values during a backoff
* Removing the unused PrimitiveBaseShape.SculptImage parameter * Improved performance of SceneObjectPart instantiation * ZeroMesher now drops SculptData bytes like Meshmerizer, to allow the texture data to be GCed * Improved typecasting speed in MySQLLegacyRegionData.BuildShape()
* Improved the instantiation of PrimitiveBaseShape
2009-10-25 00:40:21 -07:00
8ba3afb59b
Patch from dslake http://opensimulator.org/mantis/view.php?id=4291 0004291: Inconsistent locking of ODE tainted prims
2009-10-23 12:14:05 -04:00
f34e8adffb
* Moved Copyrights above the comments in ODEPrim and ODEDynamics so they're consistent with the rest (and so chi11ken's auto copyright adding script doesn't duplicate the copyright.
2009-10-22 18:28:42 -04:00
91084653bd
Commented out instrumentation in ODEPrim.cs
2009-10-22 21:14:00 +02:00
227c832d3b
Commented out instrumentation in ODEPrim.cs
2009-10-22 19:15:35 +01:00
c4969d47d9
Merge branch 'master' into vehicles
2009-10-22 07:12:10 +01:00
8151190a45
* Removing ODEPrim and ODECharacter GetHashCode() overrides since they were based on something that could change
...
* Tweaked a few other GetHashCode() overrides to bring them in line with MSDN recommendations
2009-10-20 10:56:15 -07:00
72078195c2
Merge branch 'prioritization' of ssh://opensimulator.org/var/git/opensim into prioritization
2009-10-19 15:20:38 -07:00
bd03cbd815
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim into prioritization
2009-10-19 15:19:37 -07:00
590d91e572
Forgot {} on last commit.
2009-10-19 15:03:55 -07:00
2dd8a6beac
More instrumentation in physics.
2009-10-19 14:48:17 -07:00
ffd59868f5
Merge branch 'master' into vehicles
2009-10-19 21:58:51 +01:00
6d04a213d6
Merge branch 'prioritization' of ssh://opensimulator.org/var/git/opensim into prioritization
2009-10-18 20:25:16 -07:00
0d29614ca1
Formatting cleanup.
2009-10-19 08:58:03 +09:00
baed19d068
A bit of instrumentation to figure out what's going on with physics actors.
2009-10-18 16:48:44 -07:00
2f2eeb6731
Zero out PrimitiveBaseShape.SculptData after the JPEG2000 data has been decoded to allow garbage collection on it
2009-10-18 02:53:36 -07:00
01051daaab
* One more tweak to inform the user that they may not be able to move until relogging.
2009-10-16 21:24:08 -04:00
d49424c421
* After seeing it repeat over and over again.. again, We won't inform the scenepresence that there was an issue so it doesn't try to make the capsule again. I have a feeling that this is some kind of object leak. We'll know for sure.. soon.
2009-10-16 21:20:55 -04:00
0079d0a7c4
* One more attempt at the NullRef In The OdePlugin. This might fix it, but it will definitely get us closer to the root cause.
2009-10-16 14:30:55 -04:00
1f28c6208b
* Added a message for when the null reference exception occurs to make debugging easier. Without this, from the user's perspective.. they cannot move, fly or otherwise do anything physical and without a message on the console, it would be hard to tell that this is what is occurring.
2009-10-16 03:40:44 -04:00
ac2f98b846
* A hacky attempt at resolving mantis #4260 . I think ODE was unable to allocate memory, and therefore the unmanaged wrapper call fails or worse.. there's some unmanaged resource accounting in the ODEPlugin for ODECharacter that isn't being done properly now.
...
* The broken avatar may not be able to move, but it won't stop simulate from pressing on now. And, the simulator will try to destroy the avatar's physics proxy and recreate it again... but if this is what I think it is, it may not help.
2009-10-16 03:32:30 -04:00
6deef7d0f3
Merge branch 'master' into vehicles
2009-10-15 21:14:13 +01:00
3828b3c0e8
* Eliminated unnecessary parameters from LLUDPServer.SendPacketData()
...
* Changed PrimMesher's Quat.Identity to return <0,0,0,1> instead of <0,0,0,1.1>
2009-10-13 10:38:35 -07:00
70553a979e
Merge branch 'master' into vehicles
2009-10-12 15:12:15 +01:00
50f509d600
Merge branch 'master' into vehicles
2009-10-12 15:11:01 +01:00
fe0940a22f
Optimize ODE mesh by removing sleep. On a region with 100,000 prims and ODE enabled, the first Heartbeat loop call to UpdatePhysics takes 20 minutes. 75% of that time is spent in this sleep. (100k prims * 10ms)
2009-10-12 01:53:57 -07:00
7b4183d7a0
sync PrimMesher with r46
2009-10-11 02:12:17 -07:00
41b27ef064
disambiguate System.Path (preparation for new PrimMesher)
2009-10-11 01:30:24 -07:00
8271528b1f
* comment out the velocity test, using updates every 500 ms as set in ScenePresence.AddToPhysicalScene.
...
* This causes time to be counted in ODECharacter and, when a collision occurs, the physics scene will report the collisions only if the the difference of last time it reported the collisions from now was more then the set ms.
* This is cool because the time accrues while collisions are not taking place and when they do take place again, you get an immediate update.
2009-10-10 04:01:36 -04:00
4ffe936ba8
* Make ODECharacter respect the scene's requested collision update time
...
* Set the Scene collision update time to 500 ms
2009-10-10 03:53:53 -04:00
d06c7d90a1
Correct a build break caused by an optimization in trunk
2009-10-07 06:56:00 +01:00
0374f1b144
Merge branch 'master' into vehicles
2009-10-06 17:44:59 +01:00
10c4b88ccf
minor: remove mono compile warning
2009-10-05 18:20:37 +01:00
8d5a40aad0
Merge branch 'master' into vehicles
2009-10-05 12:58:52 +01:00
6d52974c5f
Eliminate pinned Mesh data on managed heap by using IntPtrs to memory allocated on the unmanaged heap. This prevents fragmentation of the managed heap and the resulting stress on GC. A region with ~150,000 prims using ODE and Meshmerizer saw memory remain flat around 1.2GB as opposed to 1.5GB and continually growing due to pinned memory. This patch complements the unique mesh dictionary patch applied to Meshmerizer but is independent. The net effect is a 60-75% reduction in memory for our largest regions.
2009-10-05 12:45:41 +01:00
0744292b47
Merge branch 'master' into vehicles
2009-10-05 10:17:23 +01:00
5c593f3892
only cache mesh if meshing was successful
...
re-enable sculpt mesh caching
2009-10-04 20:01:44 -07:00
95ebb7794c
flexible extrusion shape defaults to linear
2009-10-04 02:59:12 -07:00
0cbd9eee2f
Exclude sculpt proxies from mesh caching
2009-10-04 02:14:13 -07:00
9eccea5777
Merge branch 'master' into vehicles
2009-10-02 19:53:42 +01:00
31d8cec0f8
Merge branch 'master' into diva-textures
2009-10-02 08:23:38 +01:00
41ff39414b
Merge branch 'master' into vehicles
2009-10-01 14:08:15 +01:00
1eb6f99d19
Create j2k cache directory if it doesn't exist. The Meshmerizer needs it there.
2009-09-30 20:27:40 -07:00
606e831ff5
Formatting cleanup.
2009-10-01 09:38:36 +09:00
07df0e0ab0
Merge branch '0.6.7-post-fixes' into vehicles
2009-09-30 19:07:18 +02:00
827b0fb199
Commit initial version of KittoFlora's vehicle changes
2009-09-30 18:51:02 +02:00
ee205e7e81
Formatting cleanup.
2009-10-01 01:17:47 +09:00
f00126dc2d
Add copyright header. Formatting cleanup.
2009-09-29 08:32:59 +09:00
fb2cabd6b3
corrections to viewerMode AddPos()
2009-09-25 13:01:48 -07:00
1b2828f5d8
Meshmerizer stores dictionary of unique Meshes keyed on construction parameters. CreateMesh() returns a Mesh from the dictionary or creates a new Mesh if it has not been created before. Meshes are never purged from the dictionary. The raw Mesh data is discarded once the memory is pinned for ODE use. All copies of the same prim/mesh use the same pinned memory. ONLY IMPLEMENTED AND TESTED WITH MESHMERIZER AND ODE
...
Signed-off-by: dahlia <dahliaTrimble@gmailDotCom>
2009-09-24 18:20:59 -07:00
daffb69174
modify BulletDotNETPrim.cs in preparation for Mantis #4181
2009-09-24 18:16:29 -07:00
56edbe9b60
Alternate algorithm for fixing avatar capsule tilt (Mantis #2905 )
...
Eliminate dynamic capsule wobble. Instead introduce a small, fixed
tilt, and allow the tilt to rotate with the avatar while moving; the
tilt always faces away from the direction of avatar movement. The
rotation while moving should eliminate direction-dependent behavior
(e.g. only being able to climb on top of prims from certain directions).
Falling animation is still too frequently invoked.
Ideally the tilt should be completely eliminated, but doing so
currently causes the avatar to fall through the terrain.
2009-09-18 11:39:08 +09:00
0683cf6e0d
Add test to check behaviour if an iar is loaded where no user profile exists for the creators
...
Disable generation of temporary profiles for now, instead record loading user as creator
2009-09-09 18:03:49 +01:00
b93f512433
* Fix for GetTerrainHeightAtXY to make it compatible when Constants.RegionSize isn't 256
2009-09-04 02:48:07 -04:00
bb5857c4bb
* Fixes the function 'GetTerrainHeightAtXY'
2009-09-04 00:03:54 -04:00
6cf610bc44
eliminate unnecessary storage of mesh objects which are no longer necessary after recent startup optimizations
2009-09-02 17:40:55 -07:00
56ddd6828c
Add copyright headers. Formatting cleanup.
2009-09-03 02:04:17 +09:00
9505297fb1
* One last attempt to get the bordercrossing/primcrossing/attachmentcrossing right in the new border framework.
...
* This also contains some inactive preliminary code for disconnecting combined regions that will be used to make one root region a virtual region of a new root region.
2009-09-02 04:39:00 -04:00
f32de6fe88
Thank you, dslake, for a set of patches to improve OpenSim startup
...
and idle performance.
2009-09-02 03:33:31 +01:00
c89fc36f28
Applying Mantis #4079 . Thank you, dslake
2009-09-01 02:17:08 +01:00
54e05a083d
Merge branch 'master' of ssh://MyConnection/var/git/opensim
2009-08-26 11:48:05 -04:00
cf2d1b5c10
Add copy constructor to PhysicsVector.
2009-08-26 14:28:54 +09:00
256624566f
Formatting cleanup, minor refactoring.
2009-08-26 14:02:01 +09:00
e1b38ff001
* It turns out that Physics heightmap values were being stored in managed memory in _heightmap and using multiple heightmaps caused them all to overwrite each other and the last one was the heightmap for all of the regions. This fixes that. It also reduces the terrain resolution to half.
2009-08-21 13:22:49 -04:00
64dcb71c14
* Fixes Terrain issues with combined regions.
2009-08-20 23:26:40 -04:00
311b51a184
*remove conflicts
2009-08-18 11:09:43 -04:00
c54cb59a71
* Some Physics Scene Changes to prepare for larger regions
2009-08-18 11:05:07 -04:00
9ad3e72ae1
Did I say that i don't like git? Remove some stuff that shouldn't have
...
gone in.
2009-08-17 22:06:51 +01:00
644db1e540
Add System.Xml reference to the console project
2009-08-17 09:40:38 +01:00
9d9fcac038
Misc cleanup.
2009-08-16 17:14:21 +09:00
30ce56e721
Merge branch 'master' of ssh://MyConnection/var/git/opensim
2009-08-15 13:10:21 -04:00
8000812700
* part one of adding physics combining
2009-08-15 13:10:10 -04:00
1123a326ab
Formatting cleanup. Fix some compiler warnings.
2009-08-13 15:43:24 +09:00
3e247a8eaa
Minor: formatting cleanup.
2009-08-11 00:32:59 +09:00
8863092f7c
Split BasicPhysics classes into separate files.
2009-08-11 00:32:59 +09:00
e88903f481
* Fix one physics crash for regions larger then 512mx512m
2009-08-08 10:38:53 -04:00
2b990a61bf
This is the second part of the 'not crash on regionsize changes'. This lets you configure region sizes to be smaller without crashing the region. I remind you that regions are still square, must be a multiple of 4, and the Linden client doesn't like anything other then 256. If you set it bigger or smaller, the terrain doesn't load in the client, the map has issues, and god forbid you connect it to a grid that expects 256m regions.
2009-08-07 20:31:48 -04:00
c8a68fb3fb
* Remove hard coded 256 limitations from various places. There's no more 256m limitation within the OpenSimulator framework, however, the LLClient ClientView does not support regions larger then 256 meters so, if you try and make your region larger by setting Constants.RegionSize = 512; in OpenSim.Framework.Constants.cs, the terrain will not display on clients using the LLUDP protocol
2009-08-07 18:40:56 -04:00
190bdc8a2e
* Remove some mono compiler warnings
2009-08-05 17:33:23 +01:00
21e62e87c7
starting to refactor path generation out of prim extrusion
2009-08-03 22:59:47 -07:00
6c94ce1cca
Flag certain meshes to avoid vertex list compaction. This should help speed up meshing time at startup.
2009-07-30 07:06:23 +00:00
a133e83f3a
Formatting cleanup.
2009-07-23 15:32:11 +00:00
e2e43f1ab7
* Whoops, forgot the water heightfield.
2009-07-22 04:11:51 +00:00
9f4b8260c2
* Exclude heightfield geom from the raycast test.
...
* Fixes mantis #3922
2009-07-22 04:04:30 +00:00
156c393a44
* nothing in this commit, re-triggering panda.. which crashed while testing.
2009-07-21 03:28:12 +00:00
5c8fe5c01c
* Fixed a case where a prim was a NullPhysicsActor instead of an OdePrim
...
* Commented logic that wasn't being used.
* This should fix the errors in OdeScene.near
2009-07-21 03:18:19 +00:00
08819bcbea
* Created a way that the OpenSimulator scene can ask the physics scene to do a raycast test safely.
...
* Test for prim obstructions between the avatar and camera. If there are obstructions, inform the client to move the camera closer. This makes it so that walls and objects don't obstruct your view while you're moving around. Try walking inside a hollowed tori. You'll see how much easier it is now because your camera automatically moves closer so you can still see.
* Created a way to know if the user's camera is alt + cammed or just following the avatar.
* Changes IClientAPI interface by adding SendCameraConstraint(Vector4 CameraConstraint)
2009-07-19 02:32:02 +00:00
01446074b1
Revert the nonessential part of r10033 to restore sanity to trampolines
2009-07-16 19:09:03 +00:00
8e1ab33ed3
* Tweaking collision reporting a little more in ScenePresence to not check if the collisions will affect health if the avatar is invulnerable. (saves 3 loops)
2009-07-16 04:50:49 +00:00
56d295cfb5
Fix for avatar falling through terrain when av_capsule_tilted=false, Mantis #2905
...
This fix re-introduces a small tilt into the capsule to prevent
avatar falling through terrain. Re-introduction of the tilt means
that some direction-dependent behavior when walking over prims, but
I have tried to minimize this.
Additionally this commit allows the capsule to wobble slightly when
being pushed around the terrain. This should make walking over prims
easier, as the capsule can wobble and glide diagonally over the prim's
edge, instead of rigidly being stopped vertically against the prim's
face.
2009-07-15 10:09:37 +00:00
750f75c514
Thank you, Twitch, for a patch to restore mayhem and murder to OpenSim
...
Fixes Mantis #3888
2009-07-14 23:20:59 +00:00
73251ed346
add a constructor overload and an AddPos method to SculptMesh
2009-07-14 06:09:18 +00:00
3f2ee8915d
Some improvements to prim face numbering - only affects viewers using PrimMesher
2009-07-11 04:53:41 +00:00
0ec6dfb1a1
Experimental fix for tilted avatar capsule, Mantis #2905
...
Set av_capsule_tilted to false in opensim.ini. Default is true, so there is
no change in avatar behavior (and no breaking of existing content which
relies on the tilted capsule).
This commit straightens up the avatar capsule so it behaves consistently
(e.g. same collision behavior against prims regardless of which direction
the avatar is coming from; ability to fit through narrow doorways).
Please note this introduces other side effects which have not been fixed.
In particular:
* The avatar frequently falls through the terrain if it is not flat, though
the avatar behaves pretty well on flat terrain. This requires investigation
of the ode terrain collider.
* The apparent foot position of the avatar with respect to the ground
is changed. This requires investigation of the avatar height/capsule height.
Please consider this as work in progress.
2009-07-08 01:41:05 +00:00
652bcf91d5
- fixes a "collection out of sync" exception in the ODE physics
...
engine, caused by an "avatar infinite position" occurring under
heavy load.
- fixes "value too small" exception in ChatModule
2009-06-25 07:39:48 +00:00
034de5ecd6
Properly reset a vehicle's status to VEHICLE_TYPE_NONE when requested
2009-06-19 22:32:02 +00:00
8045ed28ec
From: Alan Webb <alan_webb@us.ibm.com>
...
Eat collision errors --- NOTE: this fix might be naive, it seems to
have helped us getting to 81 avatars (whereas we'd crash with 20
before), but it sure would benefit from some check-over by a person
skilled in the art of ODE physics.
2009-06-10 11:48:13 +00:00
a23d64dec1
Formatting cleanup.
2009-06-10 04:28:56 +00:00
f94e192b86
some code cleanup
...
test commit with cygwin svn
2009-06-06 08:41:27 +00:00
1e3f378c57
Fix comparison of UUID with null.
2009-06-04 01:26:31 +00:00
6f37fd8399
* Pried apart the ODE tests. This fixes mantis #3212
2009-06-02 18:12:34 +00:00
840de6c036
Minor: Change OpenSim to OpenSimulator in older copyright headers and LICENSE.txt.
2009-06-01 06:37:14 +00:00
be41a2cb7e
reduce verbosity of sculpt map cache messages to reporting cache failures only
2009-05-31 23:57:52 +00:00
179724b4fc
some clean up of sculpt map caching code
...
remove a redundant debug message
2009-05-29 08:57:10 +00:00
05cbf0b502
reinstate a hopefully more robust experimental decoded sculpt map caching scheme
2009-05-29 06:50:15 +00:00
1609e7eac0
disable sculpt map caching until a better method of avoiding asset requests can be found
2009-05-29 05:11:50 +00:00
db4f8d1298
Experimental decoded sculpt map caching
2009-05-29 02:46:35 +00:00
85e91ddb67
Revert "* Added IntegrationTest Attribute and tagged the ODETestClass"
...
This reverts commit 8f0096cc7b112fea8f69f391224911f624482747.
To get us back to compiling on fresh checkouts.
2009-05-27 12:53:29 +00:00
17f0a4be53
* Added IntegrationTest Attribute and tagged the ODETestClass
2009-05-27 12:36:58 +00:00
ba360ede8b
* Upped version number to 0.6.5
2009-05-25 11:43:56 +00:00
1d02636c27
cleaning out warnings.
...
NOTE: we currently have a gazillion warnings caused stuff flagged as
"obsolete" (OGS1 stuff) --- what's up with that?
2009-05-22 14:57:00 +00:00
87b95e324e
Sculpt mesher refactor
...
adds some previously missing geometry to sculpties
new LOD improves vertex accuracy
fix torus mode mesh edge joining
sync with primmesher r37
2009-05-19 10:09:33 +00:00
14c1e991c6
some sculpted prim geometry accuracy and meshing speed improvements
2009-05-15 03:14:04 +00:00
bd3a4e5f01
Added a Copy() method to PrimMesh and SculptMesh as suggested by dmiles. Sync PrimMesher.cs and SculptMesh.cs with PrimMesher.dll r36.
2009-05-08 03:04:45 +00:00
09522743cb
alter behavior of sculpted prim "Inside out" setting. Addresses Mantis #3514
2009-05-03 06:25:52 +00:00
6f3437b77e
some code cleanup
...
sync with primmesher r35
2009-04-24 19:43:15 +00:00
9c13a93583
Limit hollow size of physics proxy to 95%
2009-04-24 19:28:29 +00:00
c5a3ff231f
* It turns out vehicle Angular Motor direction is always in global space.
2009-04-20 17:46:37 +00:00
b98f93212b
* Prevent a vehicle crash
2009-04-20 06:56:53 +00:00
21d4423030
* Allow passing of material type to physics engine
...
* Define low friction and medium bounce for Glass
2009-04-20 03:07:53 +00:00
716e1fe0e1
Keep IsColliding updated for the recent changes in ScenePresence so that walk/stand animations will get used instead of just falling
2009-04-19 12:28:29 +00:00
03901c8c0d
* Rudimentary angular motor implementation for the LSL Vehicle API
2009-04-19 08:12:10 +00:00
5f1fa0d3d7
Added a "force_simple_prim_meshing" option to the ODE settings in OpenSim.ini which will use meshes for collisions with simple prim shapes rather than internal ODE algorithms. This may help with Mantis #2905 and Mantis #3487 for those experimenting with capsule settings.
...
Note that this will increase memory usage and region startup time.
2009-04-19 01:21:38 +00:00
15b9c528c5
Add some documentation. (note this is *not* a thinly veiled attempt to increase my commit frequency *wink*)
2009-04-18 17:15:56 +00:00
68190617b4
* A few fixes to the Linear Motor
2009-04-17 23:04:33 +00:00
07c113a766
* Add Implementation of Linear Motor and Linear friction from the LSL Vehicle API in Physics
2009-04-17 21:10:54 +00:00
e95fe66dd5
* Set some minimum values to avoid divide by zero errors.
2009-04-17 04:38:31 +00:00
0d00a767bc
* Commit a few fixes to the Vehicle settings
...
* Vertical Attractor servo
2009-04-17 04:34:52 +00:00
8a7a0190e6
* Remove some super experimental stuff in BulletDotNETPlugin since it was causing issues.
...
* Tweak the ODEPrim PID a bit more.
2009-04-16 08:11:05 +00:00
eac5d4015d
* Committing more BulletDotNETPlugin work
...
* Tweak the LLSetStatus results in the ODEPlugin. Hopefully it's a little less unstable.
* ODEPlugin is using experimental math for LLSetStatus, use with caution! :)
2009-04-16 07:31:48 +00:00
d34d5eb3f7
* Adding some organization of vehicle type stuff in the ODEPlugin.
...
* Vehicles do NOT work. This is just organization and a bit of logical code to make doing vehicles easier
2009-04-14 09:03:18 +00:00
c2e75aecd1
* Commit a variety of fixes to bugs discovered while trying to fix the NaN singularity.
...
* WebStatsModule doesn't crash on restart. GodsModule doesn't crash when there is no Dialog Module. LLUDPServer doesn't crash when the Operation was Aborted.
* ODEPlugin does 'Almost NaN' sanity checks.
* ODEPlugin sacrifices NaN avatars to the NaN black hole to appease it and keep it from sucking the rest of the world in.
2009-04-14 01:57:35 +00:00
2dca78b2bf
* BulletDotNETPlugin supports Axis lock (LLSetStatus) from the script engine now.
2009-04-11 03:04:08 +00:00
53026affb3
* Instead of referencing mesh stuff in the physics plugin.. change the IMesh Interface. (blame prebuild)
2009-04-11 00:11:54 +00:00
474b982eba
* Adds Physical/Active Linkset support to BulletDotNETPlugin
2009-04-10 23:26:42 +00:00
10f5615573
* Tweak the character controller some more
...
* Add cursory integration with script engine.
* LLMoveToTarget, LLSetBouyancy, LLSetStatus (Physical only), LLApplyImpulse, LLApplyTorque, LLPushObject.. etc.
* Still missing linked physical active and LLSetStatus with an axis lock.
2009-04-10 06:01:29 +00:00
b05a1aa4b7
* Whoops, never saved the BulletDotNETScene.. Last commit continued.....
2009-04-09 22:00:15 +00:00
4050dec682
* Changes the timstep of the bullet world
...
* Enables border crossings when using the BulletDotNETPlugin
* Enabled variable time steps in BulletDotNETPlugin
* Still no 'linked physical objects' yet
* Still no script engine integration
2009-04-09 21:48:11 +00:00
b326b55bcd
* Added finite testing to the character and object constructor
2009-04-07 16:41:07 +00:00
9bbc7e8bf6
* Added a routine to check if a PhysicsVector and Quaternion is finite
...
* Now validating input to the Physics scene and warning when something is awry.
* This should help nail down that Non Finite Avatar Position Detected issue.
2009-04-07 16:13:17 +00:00
11f8ea30f9
* Tweak the BulletDotNETPlugin character controller so it feels more finished.
2009-04-07 15:01:46 +00:00
0d4880d5cf
* This fixes BulletDotNET so it can now be used on linux.
2009-04-07 03:33:28 +00:00
9459b16cc2
* BulletDotNET Updates.
...
* Should react somewhat normally to editing, and setting physics now.
2009-04-07 00:13:08 +00:00
465f1df592
Add copyright headers, formatting cleanup.
2009-04-06 14:36:44 +00:00
f73d4f9735
unspecified sculpt stitching mode now defaults to plane instead of sphere. Addresses Mantis #3403
2009-04-05 19:25:39 +00:00
cf1e8b1723
* Fixing SVN properties
2009-04-05 08:43:29 +00:00
e592d03843
* Committing what I have on the BulletDotNETPlugin that I have so far.
...
* It's not ready to try. It doesn't do what you expect in many ways.
* It throws errors and prints jibberish on the console
* Test it out only if you're brave and you've backed up first.
* The opensim.ini line is physics = BulletDotNETPlugin
2009-04-05 08:35:38 +00:00
5f4cab6ed3
fix an error in hollow cylinder face number calculation
2009-04-03 08:45:32 +00:00
b42fec5c74
partial support for sculpted prim "inside out" setting
2009-04-02 06:54:48 +00:00
958d764172
* Upped trunk version number to 0.6.4 as we just tagged 0.6.4-release
2009-04-01 19:44:46 +00:00
8493123629
Hard code scaled image resolution to 96 dpi prior to sculpt meshing to prevent a mono 2.4 failure. Thanks to cmickeyb for pointing out the failure.
2009-04-01 18:38:51 +00:00
aecb4fb72a
From: Alan M Webb <alan_webb@us.ibm.com>
...
Add sanity check to fly-height calculation so that it does
not attempt to retrieve information from non-existent
regions.
2009-03-31 12:45:34 +00:00
0318e824ae
* Remove a debug line of localIDs
2009-03-30 14:13:56 +00:00
6522b4f5d4
* Fixing thread safety of avatar adding and removing from the Physics Scene in the ODEPlugin
...
* This may help one of the symptoms or mantis 3363 , however it probably won't solve the occasional NonFinite Avatar Position detected.. issues that some people see. That is probably an entirely different issue(NaN).
2009-03-30 14:10:24 +00:00
ad012d4b46
add x-axis mirror capability to sculpted prim mesh - addresses Mantis #3342
2009-03-26 18:12:10 +00:00
3bedb59f50
make some arrays static to prevent excessive re-initialization - suggested by jhurliman
2009-03-26 03:10:30 +00:00
aab38c2cb2
Ensure the remembered velocity is zero when physical is turned off on a prim. Without this the velocity gets sent to the client and the prim appears to move.
...
Fixes Mantis #3303
2009-03-20 15:59:11 +00:00
fa5fef33a9
fixed propagation of normalized sculpt mesh vertex normals
2009-03-15 09:05:35 +00:00
acad0328b2
* Make all coded defaults match settings in OpenSim.ini.example
...
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
2009-03-11 18:02:22 +00:00
f9ebdee1d2
* Tweak llMoveToTarget per mantis 3265
...
* Add some comments to the Wind Module
* Add the BinBVH decoder/encoder as a scene object (to encode/decode animations programmatically).
* Add m_sitState for upcoming code to improve sit results.
2009-03-09 04:33:53 +00:00
385d3a467c
Minor formatting cleanup.
2009-03-07 16:16:00 +00:00
93a697b24d
Correct a typo, purely cosmetic.
...
FixesMantis #3263
2009-03-07 14:39:42 +00:00
5a49c772ca
* Making the minimum ground offset for flying a configurable offset in the OpenSim.ini. This is the code that causes you to rise off the ground when you press the fly button and attempts to keep you above ground automatically when flying in a simulator.
...
* minimum_ground_flight_offset, by default is 3 meters, as per Kitto Flora See OpenSim.ini.example for an example.
2009-03-07 07:17:43 +00:00
6c7151109b
* fixes mantis 3259
...
* I'm concerned however that the 'minimum fly height' should really be implemented in ScenePresence and not in the specific physics plugin so that all of the physics plugins can take advantage of it and if desired, a person could swap out the 'minimum fly height' functionality with other functionality.
2009-03-07 06:51:27 +00:00
3a93bb992f
* Added some limits to the maximum force applied per second by llMoveToTarget. Currently, it's 350 times the mass in newtons applied per second, maximum.
2009-03-07 00:27:56 +00:00
b637a11b58
Fixes Mantis #3260 . Thank you kindly, MCortez for a patch that:
...
llSetHoverHeight() should not clamp the x/y position of an object the way MoveTo does,
and it should recalculate the absolute height to hover at as an object moves to reflect
the current ground/water height under it.
Correctly implementing required adjusting the Physics interfaces and implementing at
the physics plug-in level. The attached is a patch that correctly implements
llSetHoverHeight() including updates to the ODE physics plug-in.
2009-03-06 23:01:35 +00:00
ac84d3d26b
* Fixing a few mass calculation errors suggested by jhurliman
2009-03-05 21:59:27 +00:00
36e648a37a
* minor: Remove most mono compiler warnings
2009-02-25 20:53:02 +00:00
8afad46d10
remove log4net dependency and from PrimMesher.cs
...
sync PrimMesher.cs with PrimMesher.dll version 29 on forge
2009-02-24 06:02:44 +00:00
8f55b9d735
Mantis#3218. Thank you kindly, TLaukkan (Tommil) for a patch that:
...
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
2009-02-22 20:52:55 +00:00
2e095f5727
* Upped VersionInfo to 0.6.3 and in the process, changed assemblyinfo to 0.6.3.* to better track down dll ref and overwrite problems.
2009-02-20 16:47:31 +00:00
5af465a364
* Changed all AssemblyInfo to explicit version 1.0.0.0 to not confuse poor poor Nant. We probably should take the opportunity to let the non-module bins reside in their /bin/Debug dirs later.
2009-02-19 14:51:33 +00:00
3d5a9e6748
This started as way to correct Mantis #3158 , which I believe should be fixed now. The flying status was temporarily being ignored, which caused the avie to drop sometimes -- there was a race condition. In the process it also fixes that annoying bug in basic physics where the avie would drop half-way to the ground upon region crossings (SetAppearance was missing). Additionally, a lot of child-agent-related code has been cleaned up; namely child agents are now consistently not added to physical scenes, and they also don't have appearances. All of that happens in MakeRoot, consistently.
2009-02-15 05:00:58 +00:00
7731c055e4
Set sculpt map alpha to 255 prior to scaling and meshing. Addresses Mantis #3150
2009-02-15 04:00:00 +00:00
95d53d48d4
Add copyright headers. Minor formatting cleanup. Fix some compiler warnings. Fix some m_log declarations.
2009-02-13 02:06:28 +00:00
d21601d497
Thanks Kitto Flora for a patch that adds automatic min fly height to ODE - Mantis #3134
2009-02-12 07:58:10 +00:00
c0c330988f
* Some minor cleanup
...
* sealed OdeScene
2009-02-08 17:41:15 +00:00
26ca3e26bf
Reverts patch from tuco/mikkopa/sempuki mantis #3072
2009-02-08 17:25:02 +00:00
b60931b686
* Limit the total number of joints created per frame to the maximum possible without causing a stack collision.
...
* This fixes crashing on large sets of physical prims because of stack collisions (assuming you follow the directions on linux for starting ode with ulimit). After the maximum joints are created, objects will start to fall through the ground and be disabled. Not the best solution, but it's better then a crash caused by a stack collision with the process exceeding the maximum available memory/recursions per thread.
* Make a clean region, make a stack of 5000 prim, 20 layers high. Make them physical, *SLOW*, but no crash.
2009-02-08 03:02:43 +00:00
08a9a85376
* Fixes colliding with the terrain lower then 0 and higher then 256m
...
* The actual AABB of the heightfield on the Z is now determined by the minimum and maximum heightfield value in the terrain array (assuming it's a reasonable number). This might optimize collisions in simulators that have a small difference between minimum and maximum heightfield values.
2009-02-08 01:05:09 +00:00
949ae6136e
Change access levels from private to protected to facilitate
...
subclassing; also add new method signatures. Thanks tuco and mikkopa.
Fix Mantis #3072 .
2009-02-03 08:31:08 +00:00
85c0c0557e
* Tweaks some locks when modifying an ODECharacter. This actually allows a user to log-in while the physics scene and the scripts are starting up. This also seems to smooth out the jerks on teleport/connect/disconnect a little bit.
...
* If you log-in while the simulator is starting up, you won't be able to move and the sim stats will say 0 FPS, and 0 Physics Frames and you may see only terrain. Once the sim finishes starting up, it'll all resume as normal.
2009-01-31 16:49:32 +00:00
1a55dd11f1
* More friendly OpenJpeg error handling.
...
* Often times now the only reason OpenJpeg doesn't work is because it requires Glibc 2.4 The error messages reflect that.
* In J2kDecoder module, It stops trying to decode modules if it encounters a dllnotfound exception and instead sends a full resolution layer that causes the texture sender to only send the full resolution image. (big decrease in texture download speed, but it's better then nasty repeating error messages)
2009-01-21 11:16:33 +00:00
032b30ffdb
Fix an error in sculpt LOD calculation
2009-01-21 02:40:09 +00:00
bfdf2479fb
Improve parsing of joint parameters for NINJA physics (Mantis #2966 ).
...
Multiple spaces or leading/trailing spaces when specifying the prims
to connect should no longer cause problems.
2009-01-14 04:59:57 +00:00
20670ff0c8
sync with primmesher r26 on forge
2009-01-04 19:09:31 +00:00
f836e36c49
Improve LOD scaling for anisotropic sculpted prim meshes
2009-01-04 18:36:13 +00:00
a72d3522ff
Slight optimisation: Don't check for duplication if we won't use the result anyway.
2008-12-31 20:09:17 +00:00
4b760bba79
- Added the fixed Ode.NET.dll
...
- Adapted code to match the corrected signatures
- Fixes Mantis #2934 . Hopefully.
Note: Physics on linked objects still don't work correctly:
It doesn't crash the region anymore, but the example object in
the mentioned mantis now falls through the ground.
2008-12-31 19:35:46 +00:00
067a9f3d5f
Added a missing setMass for initializing the mass of prims
2008-12-31 19:35:33 +00:00
e4c7bdc730
* Remove mono compiler warnings
...
* Leaving the 23 warnings in ChildAgentDataUpdate.cs for Diva to look at
2008-12-30 20:48:31 +00:00
2be0f7a6f0
Update svn properties, minor formatting cleanup.
2008-12-30 01:08:07 +00:00
6eed7fcd1e
* More NINJA Joint physics fixes from nlin.
...
fixes mantis #2874
2008-12-28 16:30:00 +00:00
b378bd33ad
* Fixes mantis #2922
...
* Converts some C# 3.0 syntax into it's 2.0 equivalent so that Visual Studio 2005 can compile it successfully.
2008-12-27 00:17:08 +00:00
ec2dc354b4
* Applying Nlin's NINJA Joint patch. v2. Mantis# 2874
...
* Thanks nlin!
* To try it out, set ninja joints active in the ODEPhysicsSettings
and use the example at:
* http://forge.opensimulator.org/gf/download/frsrelease/142/304/demo-playground.tgz .
* Don't forget to change the .tgz to .oar and load it with load-oar.
2008-12-26 12:58:02 +00:00
8a86439985
Removed some debugging code that was inadvertently left in in my last commit :/
2008-12-22 07:25:41 +00:00
c66cfb51f7
Fix a floating point comparison that was causing some misshaped triangles on some prim faces
2008-12-22 06:07:51 +00:00
62dd67b8b8
Mantis#2796. Thank you kindly, Gerhard for a patch that addresses:
...
On a call of llVolumeDetect(1) (or any other number !=0) volume
detection is enabled. Together with VD, the phantom flag is set to the GUI.
On a call of llVolumeDetect(0), vd detection is switched of again,
also the phantom state is removed. On a call to llSetState(STATE_PHANTOM,
false) while VD is active, also VD is switched off. The same is true for
unchecking the phantom flag via GUI. This allows to take back VD without
the need to script just by removing the phantom flag.
Things missing in this patch: persistance of the volume-detection flag.
This needs more discussion and will be included in another patch soon.
2008-12-20 21:36:42 +00:00
2537a4098a
Enabled complex meshing for simple box prims with non-zero shear
2008-12-18 17:53:38 +00:00
ff7c8551ba
* remove mono compiler warnings
...
* should work - the last compile failure looks like a random glitch...
2008-12-17 18:42:23 +00:00
3b0db66b92
* Apply http://opensimulator.org/mantis/view.php?id=2775 with small tweaks
...
* This pushes an identifier for the OpenSim scene to the physics scene. This allows log messages from the physics scene to identify which OpenSim scene they relate to.
* Thanks Gerhard
2008-12-15 18:39:54 +00:00
8ad6f575eb
* Implements the torque/Rotational Impulse methods in the PhysicsAPI and the ODEPlugin and pipes them to their respective LSL method.
...
* NBody will need to be updated, this is an API change. Torque property and AddAngularForce
2008-12-14 14:30:28 +00:00
b5dec9a37f
* Added Avatar minimum size in the ODEPlugin and a stern warning about setting the capsule size too low in OpenSim.ini
2008-12-14 07:29:40 +00:00
6f7a560c04
* A Few physical prim + linkset fixes. Prevent some crashes
2008-12-14 06:34:05 +00:00
7f80eff067
* Committing a slightly distilled version of nlin's ODECharacter race condition eliminator.
...
* The modifications that I made were only so that it didn't require changes to the public physics api.
2008-12-10 23:46:20 +00:00
cb73cf1a92
* Fixes a few instances of llSetStatus with Axis lock gone wrong.
...
* Sums up the masses of the objects within a physical linkset
2008-12-09 16:27:07 +00:00
3ba0bc8f44
Minor formatting cleanup.
2008-12-09 12:15:02 +00:00
3844e73d27
* Gerhard's patch m2781. Does some initial work for setting up llVolumeDetect.
...
* Warning! Physics API change. This means that the NBodySimulation needs to be updated!
* PhysicsActor -> void SetVolumeDetect(int) needs to go into classes that use PhysicsActor as their base class.
2008-12-09 11:11:16 +00:00
44d133da66
clean up some old debugging code
2008-12-09 08:17:31 +00:00
e61dacb928
* Adds some rudimentary error handling to the physics debug drawstuff tool.
2008-12-08 07:19:26 +00:00
76e1462dff
* Tweaks physics so that linked prim are a single body. This will make linked prim more stable and probably the last obstacle to vehicles physics wise.
...
* Fixed a bug that caused physics proxies to be scattered when you link an object.
* Single physical prim work exactly the same as before, just linked physical prim will have changed.
2008-12-07 04:03:09 +00:00
bdffd56a45
killing warnings, reformatting RemoteAdminPlugin
2008-12-05 15:28:03 +00:00
b4db3a550a
* Apply http://opensimulator.org/mantis/view.php?id=2750 with a small tweak.
...
* Initializes ODE only when a scene is grabbed rather than on plugin load. This means we don't initialize ode if that physics engine is not used, and it allows other ode use
plugins to be used instead.
2008-12-04 20:29:34 +00:00
d324389dd9
Update svn properties.
2008-12-03 04:41:31 +00:00
098f16fe31
Remove duplicated avatar height calculation in lsl functions.
...
Use height calculation in Basic Physics and Physics of Simplicity so that avatars larger than the default walk with straight legs and shorter walk on the ground.
2008-12-01 00:49:36 +00:00
07ee2c3504
Revert r7548 and r7549 until someone with prebuild-fu can help structure the dependencies
2008-11-30 03:52:18 +00:00
37afd69feb
Removed remaining meshing code
...
Add PrimMesher.dll r21
All meshing tasks are now passed through Meshmerizer and handled by PrimMesher.dll
2008-11-30 03:13:02 +00:00
fdd2388331
Update meshing code to sync with current PrimMesher.cs on forge.
...
Migrate sculpt meshing code to primMesher version. This should result in more accurate physical sculpted prim proxies.
Remove much obsolete code from Region/Physics/Meshing
2008-11-29 11:02:14 +00:00
b9c07730f5
* refactor: change some method names and doc in the physics plugin manager
...
* move the directory choice for plugins outside into RegionApplicationBase
2008-11-20 19:52:55 +00:00
d625095959
* Allow physics dlls to be loaded separately, rather than just the contents of bin/Physics
...
* This is primarily to see if not loading ODE in the unit tests will allow them to proceed, though the option of separate loading is probably a good thing in itself
2008-11-20 18:28:30 +00:00
81dcf223bf
* Add enough infrastructure code to run an extremely basic and flaky add root agent scene test
2008-11-20 16:58:40 +00:00
6f0e068cf1
Guard against a strange nullref in ODE
2008-11-19 20:04:41 +00:00
a3f785e978
Changed sculpted prim texture scaling method to bilinear to reduce scaling artifacts
2008-11-16 00:24:10 +00:00
a760586f26
* minor: remove mono compiler warnings
2008-11-14 20:15:22 +00:00
cec112c87a
* refactor: as per a recent opensim-dev thread, rename InnerScene to SceneGraph to make it more descriptive of its intended function
2008-11-12 20:16:46 +00:00
ce37b80c68
Thank you, idb, for a patch that fixes avatar height calculation
...
Our feet will now be above ground
2008-11-10 01:28:37 +00:00
087d2f9147
Enabled SoftERP for the contact structure but not SoftCFM.
...
A tube on a pole is a bit less "flubbery" so maybe this is
the right direction.
2008-11-09 20:20:20 +00:00
c6ed72b4fa
Clean up a few comments.
2008-11-09 18:43:46 +00:00
8ed4821c47
Clean up the mass < 0 logic a tiny bit when
...
calculating mass.
2008-11-09 18:22:36 +00:00
c6dad833f5
* minor: remove some mono compiler warnings
2008-11-06 21:01:16 +00:00
9770cf778e
* minor: Make some 'startup config failed to load' log messages more consistent
2008-11-06 20:38:04 +00:00
5fffc04ae6
Add more vertex normals and UV coordinates. Sync with primmesher.dll forge project.
2008-11-05 10:22:41 +00:00
9299be0080
Revert last checkin. Avatars fall through non-physical prims now.
...
There is more to the solution then just enabling soft_erp and
soft_cfm for all d.Contact cases.
2008-11-01 17:58:34 +00:00
1e376deedd
Added soft_cfm and soft_erp to the general "contact" initialization
...
for physical prim interactions. They were not previously enabled
for prim-prim interactions.
2008-11-01 17:30:06 +00:00
5cf6a7f118
Viewer side normals and UV fixes on profile cuts. Sync with primmesher.dll forge project.
2008-10-29 09:47:45 +00:00
7beeaf51f8
* minor: remove mono compiler warnings
2008-10-28 21:47:43 +00:00
ae5d92a167
some sorely needed extruder code simplification and refactoring, also some fixes to cut face UV coordinates
2008-10-28 08:57:15 +00:00
754f6ba2a2
* minor: remove mono compiler warnings
2008-10-27 20:16:42 +00:00
Melanie Thielker