b1d8aa0b64
Use the "Content-Encoding" header to indicate gzipped streams
2014-03-25 15:36:59 +01:00
368b29a680
In Core Profiles: as a fallback, try to get profiles from foreign grids using the OpenProfile protocol
...
Resolves http://opensimulator.org/mantis/view.php?id=6954
2014-03-25 09:37:18 +01:00
f90aee696a
Always throw an exception if MakeRequest (used for HTTP POST) fails. (Previously many exceptions were ignored)
...
Resolves http://opensimulator.org/mantis/view.php?id=6949
2014-03-25 09:37:10 +01:00
f901a38204
Improved logging of HTTP requests
...
- MemoryBuffer isn't seekable, so we can't log it. Log the string instead.
- Handle compressed streams
- Don't attempt to dump binary data. Either don't log it at all (if we know it's binary), or at least convert non-ASCII characters to ASCII.
- Log responses to HTTP requests
- Use the same log prefix for all of these log messages ("[LOGHTTP]"), to make them easy to see at a glance
- Increased the snippet length to 200 (80 doesn't show enough), and add "..." only if the message was actually truncated
Resolves http://opensimulator.org/mantis/view.php?id=6949
2014-03-25 09:36:53 +01:00
4289b71141
Fixed unit tests due to changes in the threadpool
2014-03-25 10:04:52 +02:00
e131e73652
Run slow operations in a separate thread, instead of using FireAndForget (which has a 1-minute timeout)
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:55 +01:00
84d7227dfd
Changed LogThreadPool to have 4 logging levels. Added console command "debug threadpool level" to set the logging level.
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:50 +01:00
b13214af27
Added a watchdog to abort slow threads in the main thread pool
...
If a task in the thread pool hangs then it will permanently take up
one of the threads. If this happens repeatedly then the thread pool will
become exhausted and OpenSim will fail. This watchdog terminates threads in the
thread pool that have been executing for over a minute (which probably
means they're hung).
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:45 +01:00
e735f76553
LogThreadPool: when the thread is for ProcessPacketMethod, also log the packet type
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:41 +01:00
4031933475
Refactored DebugFlagsEnum
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:37 +01:00
8555e54e22
Automatically start logging FireAndForget activity if the threadpool is full
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:32 +01:00
7c0ebcb984
Added debug flag: LogThreadPool. It makes us log every use of the main threadpool.
...
Resolves http://opensimulator.org/mantis/view.php?id=6945
2014-03-25 08:01:13 +01:00
091f3a8000
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-03-25 00:20:38 +00:00
e12c044eab
Don't fail to enable permissions modules correctly if there is any leading or trailing whitespace between comma separate module combinations.
2014-03-25 00:19:24 +00:00
8276a9e5f7
Fixed Debug command for Groups. (Use of wrong capitalization caused *two* "debug" options to appear in "help")
...
This is a (small) part of http://opensimulator.org/mantis/view.php?id=6949
2014-03-24 18:27:18 +01:00
6a477e044d
If prim region crossing fails then don't delete the prim from the original region
...
Resolves http://opensimulator.org/mantis/view.php?id=6946
2014-03-24 18:24:50 +01:00
1769e93c42
Fixed parsing of coalesced objects if the XML starts with an XML Declaration ("<xml ...>")
...
Resolves http://opensimulator.org/mantis/view.php?id=6944
2014-03-24 18:18:29 +01:00
1a32b35279
In Load OAR, correctly restore group-owned objects
...
Resolves http://opensimulator.org/mantis/view.php?id=6943
2014-03-24 18:18:23 +01:00
305f5110c6
In Load OAR: Zero isn't a valid Group ID
...
Resolves http://opensimulator.org/mantis/view.php?id=6943
2014-03-24 18:18:08 +01:00
35078e03e5
During Load OAR, fix the User and Group ID's in objects that are embedded in assets (previously only rezzed objects were fixed)
...
Resolves http://opensimulator.org/mantis/view.php?id=6942
2014-03-24 18:17:59 +01:00
5fd9411143
Refactored Load IAR: created a generic mechanism to modify the SOG's as they are being loaded
...
Resolves http://opensimulator.org/mantis/view.php?id=6942
2014-03-24 18:17:35 +01:00
0ff61341e4
HGAssetService searches for the "HomeURI" setting in several sections: Startup, Hypergrid, HGAssetService
...
Resolves http://opensimulator.org/mantis/view.php?id=6940
2014-03-24 18:02:22 +01:00
8cec0b3fa1
If updating a user's profile notes fails then return an error
...
Resolves http://opensimulator.org/mantis/view.php?id=6938
2014-03-24 18:02:17 +01:00
1b30ae81b5
Fixed updating usersettings in the database
...
Resolves http://opensimulator.org/mantis/view.php?id=6938
2014-03-24 18:02:05 +01:00
b9e0d0fdb2
Don't show hidden groups in search results
...
Resolves http://opensimulator.org/mantis/view.php?id=6937
2014-03-24 18:01:56 +01:00
1d4551e52f
Check settings for groups module
...
Resolves http://opensimulator.org/mantis/view.php?id=6937
2014-03-24 18:01:47 +01:00
c8583e566d
When searching for users, don't add users from the local cache if they have an invalid UUID
...
Resolves http://opensimulator.org/mantis/view.php?id=6935
2014-03-24 18:01:37 +01:00
a2dd8f31de
Trim search queries (for users, groups, etc.). I have found that sometimes the viewer adds a space at the end, which causes searches to fail.
...
Resolves http://opensimulator.org/mantis/view.php?id=6935
2014-03-24 18:01:28 +01:00
6edc446780
Fixed: OnRegionInfoChange was never triggered
...
Resolves http://opensimulator.org/mantis/view.php?id=6934
2014-03-24 18:01:22 +01:00
bf68dbabd7
Save to database these parcel updates: Force Owner, Abandon Request, Reclaim. (Previously these updates only changed the parcel in memory)
...
Resolves http://opensimulator.org/mantis/view.php?id=6934
2014-03-24 18:01:08 +01:00
89945f8829
Refactored: ExternalRepresentationUtils should be the only place where the "CreatorData" field is calculated, to ensure uniformity
...
Resolves http://opensimulator.org/mantis/view.php?id=6933
2014-03-24 18:00:59 +01:00
edc04d4184
When updating the CreatorId of an inventory item, automatically update the CreatorIdAsUuid field as well
...
Resolves http://opensimulator.org/mantis/view.php?id=6933
2014-03-24 18:00:39 +01:00
5b2af7f99e
Moved the linkage between LoginService and HGInventoryService to the config file
2014-03-24 18:33:18 +02:00
df9845a283
When a user logs-in, automatically create the Suitcase folder
...
This is only done if the Suitcase Inventory Service is used.
Previously the Suitcase was created at a later time, which meant that it wasn't shown in the viewer until the viewer was restarted.
2014-03-24 17:02:13 +01:00
7496d0b0f7
Fixed unit tests for delinking objects
2014-03-24 15:05:39 +02:00
4bccfed80c
When logging in UserAgentServiceConnector, always log the original server URL (the hostname), not the IP
...
This resolves http://opensimulator.org/mantis/view.php?id=6955 (that patch was modified a bit)
2014-03-24 14:20:19 +02:00
921f0052f4
Get the full viewer name even if it's (incorrectly) sent in the 'Channel' field
...
Recent versions of Firestorm and Singularity have started sending the viewer name in the 'Channel' field, leaving only their version number in the 'Viewer' field. So we need to search both of these fields for the viewer name.
This resolves http://opensimulator.org/mantis/view.php?id=6952
2014-03-24 12:26:52 +01:00
6734b94761
Better error messages
...
This resolves http://opensimulator.org/mantis/view.php?id=6936
2014-03-24 12:22:32 +01:00
773ffcafc3
Removed "hacktastic" code that is no longer needed.
...
We no longer set the object's AbsolutePosition in this place, so the IsAttachment hack doesn't do anything anymore.
This resolves http://opensimulator.org/mantis/view.php?id=6936
2014-03-24 12:05:25 +01:00
62b3bdf0fc
When linking two groups, and then deleting the combined group: delete *all* of the combined group's prims, including those that came from the second subgroup
...
This fixes http://opensimulator.org/mantis/view.php?id=6175
2014-03-24 11:44:48 +01:00
b0cb0ec02f
BulletSim: fix problem where axis constraints were also constraining
...
linear motion.
The code was limiting linear motion to be only in the positive direction
for any axis that was constrained.
2014-03-23 13:08:31 -07:00
db83208794
Fix negative stat for Active Scripts
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2014-03-22 23:02:10 -04:00
ff5c38534d
Reverting "Set default name for mute list" that was pushed by mistake.
...
This reverts commit 58def34dbe
2014-03-22 16:38:48 -04:00
58d7e3b8ed
Reverting "Pass method to offline.php" commit that was pushed by mistake.
...
This reverts commit fe16a72a9a
2014-03-22 16:31:36 -04:00
fe16a72a9a
Pass method to offline.php using ?blah instead of /blah/. Avoids issue with Apache web servers running PHP via CGI.
2014-03-22 15:13:03 -04:00
58def34dbe
Set default name for mute list module as shown in OpenSim.ini.example
2014-03-22 15:13:03 -04:00
d4dad75a3c
BulletSim: Fix jumping while running. Was unintentional taking way all upward target motion for avatar when running.
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2014-03-22 15:00:48 -04:00
ebe7726cd7
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2014-03-22 01:49:28 +00:00
a4d322dcd1
Allow the setting from the environment to take effect if no explicit setting is given.
...
This is done by calling the constructor only with a directory if one is actually given.
2014-03-22 01:47:48 +00:00
ccf18fd2ef
Rename SOG.InSceneBackup to CanBeBackedUp to reflect its actual functionality.
...
It does not indicate that a SOG has been set to be backed up or not. It indicates that a SOG can be backed up in principle.
In practice, this was added by lbsa71 in 2007 and is set to always true, albeit as a virtual property.
2014-03-22 01:36:21 +00:00
3d0778bcd6
Allow Mono Plugin Registry setting for Regions
...
Signed-off-by: Melanie <melanie@t-data.com>
2014-03-22 01:29:51 +00:00
a5800f479e
If an object has it's temporary flag unset after being set, put it back in the persistence list.
...
Effectively uses the patch in http://opensimulator.org/mantis/view.php?id=7060
But also adds a regression test and exposes the necessary property to allow this to work.
2014-03-22 00:29:13 +00:00
178a5a5585
rename prefix of scene-inventory.<scene-name>.ProcessedFetchInventoryRequests and QueuedFetchInventoryRequests to inventory.httpfetch.*
...
Actual inventory processing is done with a single set of static structures rather than per scene.
2014-03-21 23:29:31 +00:00
fb312279c9
Mantis 6922: No particles are generated if their size exceeds the maximum allowed size.
...
This patch ensures that no particle scal value can exceed 4.0
2014-03-21 23:13:34 +00:00
47e7febebc
Add monitored thread last update times as stats in "show stats all"
...
These have the format server.thread.<thread-name>
2014-03-21 02:06:10 +00:00
da25903300
Adding a way to disable/enable the in built Dwell Module
2014-03-20 22:35:50 +00:00
7f027552ec
If we find an existing suitcase folder in HGSuitcaseInventoryService.GetRootFolder(), then return that as a response rather than null.
...
Fixes a regression from commit 346644016chttp://opensimulator.org/mantis/view.php?id=6969
But I'm assuming that was a mistake since clearly we should be returning this data - this was original behaviour
2014-03-20 20:36:47 +00:00
d04bb3ca9b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-03-20 20:15:57 +00:00
bd6f734d3a
Mantis 6974 PERMISSION_TRACK_CAMERA should be implicit on attach.
...
http://wiki.secondlife.com/wiki/Run_time_permissions
This change makes PERMISSION_TRACK_CAMERA implicit on attach
2014-03-20 20:11:26 +00:00
b5f94c72b9
Allow MaptileStaticFile path to be set to anywhere and not force it to bin/maptiles
2014-03-19 11:16:52 -04:00
61353dde80
Allow Region specific static maptiles to be loaded from file.
2014-03-18 22:18:50 -07:00
cf97535d9e
Revert "Simplify DoubleQueue to eliminate redundant sempahore work."
...
This reverts commit 52b7b40034
2014-03-19 01:40:56 +00:00
52b7b40034
Simplify DoubleQueue to eliminate redundant sempahore work.
...
Exclusion is already guaranteed by the lock on m_syncRoot.
Semaphore could not allow more than one thread in these sections anyway since the underlying SDK structures are not thread-safe.
2014-03-19 00:48:13 +00:00
1497b75361
minor: Put ProcessedFetchInventoryRequests and QueuedFetchInventoryRequests in stats category "scene-inventory" instead of "scene"
...
To distinguish from general scene stats
2014-03-19 00:37:06 +00:00
9858766516
minor: Make "stats show" an alias for "show stats" command.
2014-03-19 00:35:49 +00:00
e6080a38c5
Rename "debug stats record" command to "stats record" for consistency. Move from debug to general command category
2014-03-19 00:29:36 +00:00
1d0a9e521c
Allow a snapshot of stats to be dumped to a file with a "stats save" command
2014-03-19 00:28:57 +00:00
fad1d70180
Add httpserver.<port>.QueuedPollResponses and httpserver.<port>.ProcessedPollResponses statistics
2014-03-18 23:47:33 +00:00
9e0d419239
minor: Correction to description of QueuedPollResponses since this covers long poll and other 'poll' types
2014-03-18 23:24:22 +00:00
eed343ed8a
Add httpserver.<port-number>,QueuedPollResponses stat
...
This shows the number pf poll responses queued for processing.
2014-03-18 23:21:07 +00:00
7df325c275
Extend locking in BlockingQueue to cover operations that are not guaranteed to be thread-safe
2014-03-18 23:05:49 +00:00
a660c0a750
Add scene.<scene-name>.ProcessedFetchInventoryRequests
...
This shows the number of requests that have been processed.
These have not necessarily been sent back to the request since this is done separately by the PollServiceRequestManager
2014-03-18 20:59:11 +00:00
8ce3fa646b
Allow "show stats" console command to take a full stat name and display only that stat.
...
For example, scene.test.RootAgents will show only the RootAgents stat in the scene named "test"
2014-03-18 20:21:47 +00:00
e82d394ddf
Add scene.<scene-name>.QueuedFetchInventoryRequests stat
...
This is to aid in detecting whether there are fetch inventory requests remaining to be processed.
2014-03-18 20:10:41 +00:00
d5f5649750
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-03-18 20:09:15 +00:00
c605c7a7b7
Lock m_syncRoot on DoubleQueue.Count. This is not documented as a thread-safe operation
2014-03-18 19:54:07 +00:00
a53272c5fb
Add delete maptile ability to MapImageService - yet untested
2014-03-18 00:50:00 +00:00
ae56b946cf
Fix a bug in previous commit 01520bb where I accidentally saved OtherCleanTime instead of Dwell
2014-03-18 00:34:40 +00:00
01520bbb3e
Save and load dwell parcel stat in MySQL DB adaptor. Field in table already exists!
...
The SQLite database adaptor was loading and saving dwell whilst MySQL was not, even though the field already exists in the db table.
2014-03-18 00:02:55 +00:00
f3e177814a
Add regression test for http inventory fetch.
...
Involved some restructuring to allow regression tests to dequeue inventory requests and perform poll responses synchronously rather than async
2014-03-17 20:51:35 +00:00
873eee5431
Implement osForceBreakAllLinks().
...
Identical to llBreakAllLinks() except that it doesn't require the script to have link permissions.
2014-03-13 00:04:20 +00:00
6a279feb2f
Only allow llBreakAllLinks() to work if script has received PERMISSION_CHANGE_LINKS
...
As per http://wiki.secondlife.com/wiki/LlBreakAllLinks
Same as existing llCreateLink() and llBreakLink()
2014-03-12 23:54:20 +00:00
296d63e20b
Implement osForceCreateLink() and osForceBreakLink()
...
These are identical to llCreateLink() and llBreakLink() except that they don't require script permissions.
However, osForceCreateLink() still requires that linked and linkee still have the same owner.
There's also an AutomaticLinkPermission setting in [XEngine] that could be set to true to prevent the LSL function checks.
But this doesn't allow the finer control over which users/scripts, etc. can do this that the OSSL functions provide.
2014-03-12 23:05:16 +00:00
beba20846f
When sending group notices through group messaging, allow the agent ID to use for fetching group data to be different from im.fromAgentID
...
This is because xmlrpcgroups currently always checks visibility for the requesting agent ID (unlike Groups v2, which can accept UUID.Zero)
But group notice IMs have a from agent which is the group rather than the sending agent.
Further addresses http://opensimulator.org/mantis/view.php?id=7037
2014-03-12 19:31:04 +00:00
7112ee0015
Enable MapImageServiceModule with no refresh
2014-03-11 23:52:11 +00:00
86630a1b70
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-03-11 23:39:07 +00:00
d975b42f6a
Instead of auto-creating a parcel on request if one doesn't cover a given location, fill in gaps or extend existing parcel right after initial data load.
...
This is in line with simpler and still existing behaviour where a default parcel is created if no parcels are in storage at all.
Making this change as another step to address current problems with spurious parcels occasionally being created.
Also adds regression tests for different load behaviours depending on existing stored parcel data.
Relates to http://opensimulator.org/mantis/view.php?id=7035
2014-03-11 23:38:22 +00:00
8edf4225f3
varregion: remove serialization of region terrain to floats when sending patches.
...
This should eliminate much memory thrashing and CPU usage while sending initial
terrain.
The old way of passing terrain was to convert it to an array of floats. This is
really bad for large terrain (think 4096x4096 floats). This change passes a dummy
float array since the real region info is used anyway and the floats are ignored.
(The ignoring the terrain floats is a kludge so as to not change IClientAPI.)
2014-03-11 07:12:47 -07:00
742f505440
Change terrain update sending to be triggered by frame tick rather
...
than everytime terrain is changed.
The TerrainModule now hooks the frame event and, if terrain has changed,
sends terrain updates to the clients. This polling pattern replaces
the previous push on change pattern and will make it easier to do per
client throttling and per scene presence terrain update ordering.
2014-03-10 22:05:18 -07:00
0237d9113d
Don't start KeyframeMotion timers until all the regions are ready. This prevents problems in megaregions (prims that think they've crossed over to other regions).
2014-03-11 00:55:58 +00:00
120f872d2b
After an object with KeyframeMotion is copied into inventory, resume the motion (previously it remained stopped)
2014-03-11 00:43:22 +00:00
932c9e757b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-03-11 00:16:31 +00:00
77e7bbcbf7
Send group notices through the same messaging module mechanism used to send group chat to avoid timeout issues when sending messages to large groups.
...
Only implementing for XmlRpcGroups initially to test.
May require MessageOnlineUsersOnly = true in [Groups] to be effective.
In relation to http://opensimulator.org/mantis/view.php?id=7037
2014-03-11 00:11:18 +00:00
9de3fe9410
Add Varregion support to osGetRegionSize OSSL function
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2014-03-07 17:48:07 -05:00
8225e3f40c
Remove try/catch in LandManagmentModule.GetLandObject() - this is very old code and the caught exceptions can no longer occur.
2014-03-07 01:41:31 +00:00
3c05d67094
Lock m_landlist whilst loading parcels from storage to prevent a race against any parcel auto-creation in GetLandObject()
2014-03-07 01:36:06 +00:00
6b7625a56b
Only auto-create a land parcel when there is none in a specified tile if there is more than 1 existing land parcel.
...
This is because there are still issues with bad parcels being generated in http://opensimulator.org/mantis/view.php?id=7035
Theorizing now that it's possible that something is calling GetParcel() before any parcel data has been loaded from persistence.
2014-03-07 01:23:19 +00:00
71918eeab4
Add regression test for sending group notices via xmlrpc groups connector.
2014-03-07 01:04:54 +00:00
ddd38a3dea
Add scene name to bad parcel add logging
2014-03-06 19:12:16 +00:00
58c0ed78d4
refactor: Simplify land object by using c# get/set auto-properties where applicable.
2014-03-06 02:12:58 +00:00
470d053443
minor: slightly simplify code in LandObject.ContainsPoint()
2014-03-06 00:51:39 +00:00
ed14e97bb4
Remove array initialize calls in LMM - these are unnecessary as the VM already does this.
2014-03-06 00:46:16 +00:00
aa2fb1ec25
minor: Increase size of parcel name field in "land show" console command output. Construct table using CDT rather than string formats
2014-03-06 00:40:24 +00:00
14569992e1
Prevent adding a land object if it overlaps any existing objects that have not had their bitmaps adjusted.
...
This is to prevent an immediate problem in http://opensimulator.org/mantis/view.php?id=7035 where a development code bug occasionally overlays all the existing parcels with a blank parcel owned by the estate manager and to gather more data.
My guess is that this parcel is being created by the new code in LandManagementModule.GetLandObject(), probably some race between threads since this only happens occasionally.
Adds regression tests for this case and for parcel subdivide.
2014-03-06 00:11:13 +00:00
4e6f7435d0
Add UUID and ready status (whether region has finished starting up) to "show regions" console output.
2014-03-05 01:23:48 +00:00
39ed382ddf
Don't request a terse update after local teleport - this will be done by the main frame loop anyway and has the potential to race that thread.
2014-03-05 00:59:27 +00:00
c9415fd763
If an avatar is sitting, send out position updates to clients for any change, not just those outside the usual tolerances.
...
This is to allow small adjustments of less than 0.05m in functions such as llSetPrimitiveLinkParams() to work
This is another fix for http://opensimulator.org/mantis/view.php?id=7044
Extends regression test for this case.
2014-03-05 00:38:38 +00:00
31de7b845f
When positioning agent with PRIM_ROTATION in llSetLinkPrimitiveParams(), set the global rotation rather than the local rotation
...
Functionally the same as the patch in http://opensimulator.org/mantis/view.php?id=7044 , thanks Aleric.
This commit also extends the regression test
2014-03-03 23:35:21 +00:00
5038a59ef3
Maybe slightly reduce warp3d memory leakage by disposing of decoded bitmap in Warp3DImageModule.GetTexture()
...
However, this still appears to be leaking massively, at least for me. Possible cause is warp3D using GDI objects internally and not disposing of them.
2014-02-28 00:16:06 +00:00
88b1fc1382
Set up a StreamReader and call ReadToEnd() instead of using the GetStreamString() extension method
...
This eliminates some stream seeking that was never necessary and makes disposable of the StreamReader consistent with other code
2014-02-27 23:13:26 +00:00
94ad69faf2
Remove long unused UntrustedWebRequest class
...
This purports to check web requests but doesn't appear to actually do that.
2014-02-27 22:58:44 +00:00
5fafea6631
refactor: More consistently use using construct within WebUtil to match other existing code there.
2014-02-27 22:52:43 +00:00
1f4f09ad69
Add more details to InvalidOperationException logging in SychronousRestFormsRequest.MakeRequest().
2014-02-27 20:35:56 +00:00
91333b9267
Stop LSL_Api.GetLinkEntities() from creating an unused list on every parameter except LINK_THIS. Simplify code.
2014-02-27 00:23:24 +00:00
ed760f2586
minor: remove unused variable from recent commit 0e23374
2014-02-27 00:14:16 +00:00
d7c9725ec0
refactor: Make osGetPrimtiveParams() and soSetPrimitiveParams() use common get/set params code in LSL_Api rather than an old copy&pasted section.
2014-02-27 00:11:50 +00:00
6955190c7d
Add Util method to load OpSys env vars
2014-02-26 23:39:45 +00:00
ce5d308d23
Add some regression tests for previous commit 0e23374
2014-02-26 23:13:56 +00:00
0e23374aa2
Implement PRIM_ROTATION, PRIM_ROT_LOCAL, PRIM_POSITION and PRIM_POS_LOCAL when manipulating avatars via llSetLinkPrimitiveParams()
...
Combination of core parts of Freaky's patch at https://github.com/ft-/opensim-patches/blob/master/opensim-llsetlinkprimitive-agent-fix.patch plus further adjustments from myself.
Resolves Mantises 6121, 6421, 6573, 6657
2014-02-26 23:07:13 +00:00
26fe59c35e
Improve regression test TestSetAppearance()
2014-02-24 19:43:06 +00:00
bc9952f901
Re-enable regression TestSaveBakedTextures()
2014-02-24 19:30:33 +00:00
fd1b2a1c57
Stop mesh avatars that specify the alpha texture in their bake slots from causing the simulator to continually request that they rebake
...
This is because the alpha texture is not in the cache, we must continue to have the fallback of looking for these and other persisted bakes in the asset service.
Relates to http://opensimulator.org/mantis/view.php?id=6927
2014-02-24 19:20:50 +00:00
0f03c64a0c
Make Scene.DefaultDrawDistance to be the max of the region size and the
...
user setting. Seems this parameter has many side effects.
2014-02-23 21:56:37 -08:00
0b213af675
Fix problem of hurricane speed winds. Thanks Vegaslon.
2014-02-22 15:04:28 -08:00
cddf1ec0dc
Added 2 new behaviors to pCampBot
2014-02-21 10:06:08 -08:00
97c74afca8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-02-21 10:05:06 -08:00
d27e188fe2
Added 2 new behavirors to pCampBot. These are part of a systematic study I'm doing for understanding the load that AgentUpdate packets incur on the server.
2014-02-21 10:04:12 -08:00
11b4f534c2
If texture decode fails in Warp3D map maker, log uuid of asset that failed to decode along with exception
2014-02-20 23:36:50 +00:00
d50d169441
If GetFolderContent called by WebFetchInvDescHandler.Fetch() fails for some reason and returns null, log and return empty contents rather than throwing an exception that ends up terminating the simulator.
2014-02-20 22:35:41 +00:00
28419251bf
minor: Add some method doc to AFM,SetAppearanceAssets()
2014-02-20 19:30:47 +00:00
d1bb73d068
In core.groups GroupsServiceRemoveConnector, if GetGroupRecord() or UpdateGroup() do not have a RESULT parameter in the result message, return null rather than fail with NullReferenceException
...
This check was already done by other methods.
Looks to resolve http://opensimulator.org/mantis/view.php?id=7012
2014-02-20 19:17:21 +00:00
4d1426e77d
For now, do not replacing missing wearables with default wearables if itme details cannot be found.
...
This is causing many issues on OSGrid, possibly due to teleporting timing differences with simulators hosted in different places or HG teleports
Added a bit more logging for debug purposes.
See http://opensimulator.org/mantis/view.php?id=6939
2014-02-20 18:40:21 +00:00
a2866b85f3
add newRegion parameter to CrossAgentToNewRegion event and trigger the event after crossing thread is invoked
2014-02-20 00:18:28 -08:00
269a6410a0
add EventManager event OnCrossAgentToNewRegion
2014-02-19 17:52:38 -08:00
c26f01ff8c
varregion: make scene default draw distance to be the maximum size of the
...
region. This is a temp fix for the use of draw distance to compute child
regions. Eventually must use the draw distance from the viewer for the
computation.
2014-02-19 09:51:49 -08:00
fc9930e420
Repair check for if in region position (I mean || is kinda like &&).
2014-02-15 18:49:40 -08:00
79200ed270
Fix displacement and location operations on legacy trees and grass in
...
the 'load oar' and 'scene' commands. Before they were ignored but the
code now relies on the SOG.IsAttachment function for attachmentness.
2014-02-15 17:10:20 -08:00
7fc289c039
Properly restore position on crossing failure for mega-regions.
...
Fix odd "cannot cross into banned parcel" viewer error message when crossing
into non-existant region. Proper permission failure messages are now returned.
2014-02-15 17:02:53 -08:00
877bdcdce1
Rewrite of mega-region code to use new form of border checking.
...
This commit eliminates all of the 'border' class and list code and replaces
it with testing if in the current region.
Impacts: can make a mega-region out of varregions of the same size; and
mega-region combinations must be rectangular (not square but rectangular)
2014-02-15 16:01:43 -08:00
bdbbeaa494
Non-functional changes of numbers into symbolic references and a few
...
comments on what variables really mean.
2014-02-15 16:01:01 -08:00
f6913e911e
Merge branch 'justincc-master'
2014-02-15 01:18:10 +00:00
f74aafaf63
In GridUserService, if a UUID is given consistently use the longest matched entry (as already done by GetGridUserInfo()) in order to avoid problems with multiple entries.
...
This is to avoid issues where LoggedIn, SetHome, etc were always using the exact UUID match but GetGridUserInfo() would use the longest.
Looks to address http://opensimulator.org/mantis/view.php?id=6986
2014-02-15 01:13:58 +00:00
4fed301e65
Don't request group information in SP.MakeRootAgent() if the presence belongs to no group (UUID.Zero)
...
This was trigger the XmlRpcGroups errors described in http://opensimulator.org/mantis/view.php?id=6986
Introduced in commit 5b73b9c4
2014-02-14 23:43:07 +00:00
733e067958
Log information about which function, request data and agent ID triggered an XmlRpcGroupsServiceConnector error
2014-02-14 21:28:45 +00:00
ffd0da23fb
Merge branch 'justincc-master'
2014-02-14 00:16:17 +00:00
f49d513089
Change warns associated with UserAgentServiceConnector to debugs, as this is not necessarily a problen with the source simulator (e.g. someone else's remote simulator cannot be contacted).
...
This is Oren Hurvitz's second patch from http://opensimulator.org/mantis/view.php?id=6956 with a small amount of correction
2014-02-14 00:08:13 +00:00
fc35b45e21
If calls to UserAgentServiceConnector fail then throw an exception. This lets the caller decide whether to discard the error or not.
...
This is Oren Hurvitz's 0001 patch from http://opensimulator.org/mantis/view.php?id=6956 but I ended up doing some tweaking to resolve patch application issues.
2014-02-14 00:01:12 +00:00
bc7fda39b4
Merge branch 'justincc-master'
2014-02-12 23:23:56 +00:00
e10012a7a6
If a caller tries to queue a CAPs message to a scene presence that has no event queue (e.g. an NPC), only warn if event queue debugging is greater than zero.
...
Removes the spurious log warnings if groups are active when NPCs are used.
Adds more regression tests associated with adding messages to the event queue
2014-02-12 23:18:10 +00:00
3a7c8d1f32
BulletSim: the minimum vehicle velocity was set too low so moving slow
...
was getting zeroed too easily. Added VehicleMinVelocity parameter.
2014-02-11 21:07:55 -08:00
c0cc5e0fa4
varregion: Send large region patches for wind and clouds.
2014-02-11 21:07:55 -08:00
b83a224147
Add JsonRezAtRoot script function. Operation is very similar to
...
llRezAtRoot except that the start parameter is a Json string that will
be unpacked into a json store identified by the objects uuid. This
makes a much more expressive (and simpler) way of passing initial
parameters to a rezzed object.
2014-02-09 18:07:49 -08:00
cf61cdf58c
Fix - Viewer crash during HG Teleport
...
Signed-off-by: Robert Adams <misterblue@misterblue.com>
2014-02-06 11:33:17 -08:00
1913ab5ad5
Update the SimianMaptile uploader to accommodate varregions.
2014-02-05 21:26:39 -08:00
29c8461631
Remove the added whitespace, test concluded
2014-02-04 05:54:28 +00:00
8f372b8ac8
Bot test
2014-02-04 05:52:22 +00:00
342be228c6
Remove compile error from returning value in void function
2014-02-03 21:53:14 -08:00
1b41ec0a85
Fix raw32 terrain heightmap reader so it estimates terrain size from
...
the size of the input stream. This is required since the raw heightmap
format (.r32) does not contain any size information.
The estimation relies on terrain being square.
2014-02-03 21:23:32 -08:00
31cba5aa66
Add one check for a blank URL because the module wasn't quite sure not to work when unconfigured :|
2014-02-04 04:20:37 +00:00
f0f852b27f
Final code drop for appearance. Adding Avination's baked texture storage server.
2014-02-04 02:29:02 +00:00
1197658233
Adding the Avination XBakesModule, the client for the persistent bakes system
2014-02-04 02:09:39 +00:00
e1d1c27965
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2014-02-04 01:55:41 +00:00
49c2213a01
Dropping the rest of Avination's modified appearance code for core.
...
Module to follow.
2014-02-04 01:54:16 +00:00
41b6602a77
Add "--no-objects" parameter to 'load oar'.
2014-02-02 22:16:01 -08:00
8c6a0cb44a
Really add the old parameter names to load oar to keep downward compatibiliy
2014-02-02 17:18:08 -08:00
2a4dd34616
Change new 'load oar' parameters to be hyphenated to be consistant with
...
existing parameters. ('--forceterrain' becomes '--force-terrain').
The old forms have been kept for downward compatiblity.
2014-02-02 12:21:18 -08:00
9c97fb8e12
Implement terrain merging in TerrainChannel.
...
Modify archiver to use terrain merging when loading oars.
This makes displacement AND rotation properly work on terrain when loading oars.
Especially useful when loading legacy region oars into large varregions.
2014-02-02 11:17:49 -08:00
a8e64cd59a
Overload INPCModule.CreateNPC() to allow agentID to be specified. Note: this is intended for use in region modules and is not exposed to scripts.
2014-02-01 04:09:20 -08:00
abb193ec94
In UuidGatherer, gather materials referenced in the prim's TextureEntry
...
Signed-off-by: dahlia <dahlia@nomail>
2014-02-01 02:56:15 -08:00
b2878eb773
Merge branch 'justincc-master'
2014-01-31 00:51:22 +00:00
b8e22f02e7
Make sure Web streams are disposed after use
2014-01-31 00:44:22 +00:00
1380b37d71
Made error messages more consistent
2014-01-31 00:24:52 +00:00
3d62f4369d
Replaced throwing exceptions with calls to Error()
2014-01-31 00:24:47 +00:00
d405254971
Replaced llSay()ing LSL errors with calls Error()
2014-01-31 00:24:43 +00:00
9db4090c07
Replaced LSLError() calls with calls to Error()
2014-01-31 00:24:40 +00:00
c9550e473d
Updated "deprecated" LSL errors to use Deprecrated()
2014-01-31 00:24:36 +00:00
257f9cec40
Updated "not implemented" LSL errors to use NotImplemented()
2014-01-31 00:24:31 +00:00
13bb9ea682
Updated ShoutError() calls to use new LSL error methods
2014-01-31 00:21:22 +00:00
67ec95bde8
Updated methods for handling LSL script errors, deprecated, and not implemented
2014-01-31 00:20:10 +00:00
c467dfcd81
Merge branch 'justincc-master'
2014-01-30 00:42:20 +00:00
b73baeb4a4
Record whether login to home fails because no home set (UUID.Zero) or region not found.
2014-01-30 00:40:56 +00:00
b50e5704b8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-30 00:06:09 +00:00
7807b19a89
Merge branch 'justincc-master'
2014-01-30 00:05:12 +00:00
bdab05df0e
Add "show grid user" robust/standalone console command for debug purposes.
...
Shows all data on entries which match or start with a given ID.
This would usually be a UUID.
2014-01-30 00:03:22 +00:00
0842e2e15b
BulletSim: default physical terrain implementation to heightmap.
...
It originally looked like mesh terrain would perform better for vehicles
but, after much use, heightmap is the clear winner.
Force terrain implementation to heightmap if the physics region is
larger than legacy region size. This solves running out of memory for
very large regions.
2014-01-29 06:44:14 -08:00
fbf33ef1de
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-28 22:42:35 -08:00
3f5c6c897f
One more run at fixing the sun module. Parameter setting fixed to
...
work through the OSSL interface. And setting the parameters now
adjusts all the dependent variables correctly so the sun moves
at the modified rate.
2014-01-28 22:40:39 -08:00
1900254e77
Restore brush tests with correct values and adjustments for new terrain height
...
rounding characteristics.
2014-01-28 21:43:18 -08:00
678c107915
Temporarily disable brush test. It will come back when tuning is complete.
2014-01-28 16:58:27 -08:00
dde0e547a7
Change area of brush test to account for rounding errors in terrain implementation
2014-01-28 16:48:34 -08:00
226b5e4d75
Increase the strength of brushes in brush test in an attempt to overcome rounding
...
introduced with new terrain height class.
2014-01-28 16:36:56 -08:00
cfe1bced7d
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-28 16:34:49 -08:00
2877c7d94d
Actually make the parameter updates change the behavior of
...
sun movement.
2014-01-28 16:34:22 -08:00
0c3493f619
clear land tainting when tested. Then testing, pass scene to LandObject as now needed to get region size
2014-01-28 16:25:01 -08:00
d25265ae82
Fix terrain tests by properly initializing low detail terrain to zero height.
...
Also remove PI heightmap test as new heightmaps only have two significant digits.
2014-01-28 15:58:45 -08:00
1d533b0f01
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-28 15:47:24 -08:00
bfb0011cd3
Some major surgery on the sun module. Updates to the client were gated
...
by a "mode" check. That mode check has been removed (it didn't result
in any change of behavior anyway). Also added a command line variable
update to set the sun position time offset (offset from the system
clock). Default is no offset to preserve existing behavior.
2014-01-28 15:43:47 -08:00
e5d59dc696
Repair database routines so they properly return null when asked for
...
the heighmap of a region that does not exist.
2014-01-28 15:29:06 -08:00
8eec717f5f
Merge branch 'master' into varregion
2014-01-28 08:50:28 -08:00
4faf11e001
varregion: fix for teleporting by double clicking on a map location.
...
Thanks Garmin.
2014-01-28 08:49:22 -08:00
cd35d298fa
Merge branch 'justincc-master'
2014-01-28 00:23:10 +00:00
2cf224166f
Added osGetRegionSize(), which returns the region size in meters and recognizes megaregions
2014-01-28 00:11:50 +00:00
f7172095e0
Convert tabs to spaces from previous commit 8c2b41b01
2014-01-28 00:04:55 +00:00
8c2b41b01d
Make inidirectory files supercede distro files
2014-01-27 23:56:10 +00:00
a4017ee1eb
Reinsert attachments list taking code in SP.MakeRootAgent()
...
Locking attachments then launching script instances on a separate thread will not work, attachments will simply be unlocked and vulnerable to race conditions.
2014-01-27 23:47:43 +00:00
1b86239f79
refactor: Remove identical part.ParentGroup.AddAvatar(UUID); calls which occur no matter which branch of the conditional is executed
2014-01-27 23:17:09 +00:00
e2fbc88d98
Re-enabled NPCModuleTests.TestCreate()
2014-01-27 22:56:51 +00:00
49af6b53e7
varregion: enable teleporting to a varregion by clicking on the map and
...
pressing the 'teleport' button.
This commit adds returning region map info for all the subregions of a
varregion. This also handles the selection of the extra region and then
the displacement of the postion so the teleport is to the correct location.
2014-01-26 19:32:28 -08:00
13a9d5409c
Merge branch 'master' into varregion
...
Conflicts:
OpenSim/Region/CoreModules/World/LegacyMap/MapImageModule.cs
OpenSim/Region/CoreModules/World/LegacyMap/ShadedMapTileRenderer.cs
OpenSim/Region/CoreModules/World/LegacyMap/TexturedMapTileRenderer.cs
2014-01-26 07:56:47 -08:00
6831e58616
varregion: modify MapImageModule structure so it will better merge
...
with changes made in master.
2014-01-26 07:38:28 -08:00
0eda7dd1c7
Merge branch 'justincc-master'
2014-01-24 19:41:41 +00:00
fea8345f56
minor: remove long unused state queue from "show queues" console reports
2014-01-24 19:40:14 +00:00
c9b5ba78d9
minor: correct the usage statement on the "show image queues" console command - should not have been "image queues show"
2014-01-24 19:36:12 +00:00
4a9796a506
Skip IClientAPIs that don't implement IStatsCollector (such as NPCAvatar) from the "show queues" console report to stop screwing up formatting.
...
"show pquques" already did this
2014-01-24 19:31:31 +00:00
afb2e07111
varregion: pass region size in more HG services.
2014-01-24 06:30:38 -08:00
674a3a5639
Enable the simulator to handle region size information returned from
...
a hypergrid gatekeeper. Fields are "size_x" and "size_y". Server side
will be updated separately.
2014-01-23 16:20:18 -08:00
966ab21839
Merge branch 'justincc-master'
2014-01-24 00:17:39 +00:00
a2d5d810e0
Properly dispose of drawing objects to reduce/stop memory leakage on generating map tiles with the MapImageModule and TexturedMapTileRenderer (the current defaults)
2014-01-24 00:14:58 +00:00
a859464e91
Add "generate map" console command to allow manual regeneration and storage of maptiles
...
Primarily for test purposes though could be useful if one prefers to manually update the map tile
2014-01-23 23:44:21 +00:00
4c362a83f9
Merge branch 'master' into varregion
2014-01-21 11:31:51 -08:00
83626e60e6
Adds a configuration option to cannibalize bandwidth from the
...
udp texture throttle and move it to the task throttle. Since most
viewers are using http textures, the udp texture throttle is holding
onto bw that could be used for more responsive prims updates. See
the documentation for CannibalizeTextureRate in OpenSimDefaults.ini.
Option is disabled by default.
2014-01-20 18:59:43 -08:00
7bd42fc42f
Add back code to UuidGatherer to retrieve UUIDs for materials stored in DynAttrs. This is unfortunately still necessary until a better solution for handling existing legacy materials can be implemented
2014-01-20 15:01:18 -08:00
af58631f00
rather than converting existing materials to assets, just retrieve them and make them available for viewing. Any new materials added to the scene will become assets.
2014-01-20 13:57:14 -08:00
719810e9d8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-20 11:54:36 -08:00
1cae3664a5
add null texture entry face check before converting legacy materials
2014-01-20 11:53:33 -08:00
5fc871027e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2014-01-20 19:38:47 +00:00
2cf7478b9a
Merge branch 'justincc-master'
2014-01-20 19:34:55 +00:00
2e78e89c36
Clean up orphaned json stores. This can happen when an object is
...
removed, when a script is removed, or when a script is reset. Also
added a stats command to track the number of json stores used by
a region. Will probably add some more commands later.
2014-01-20 11:33:49 -08:00
8e72b53edc
Stop exceptions being generated on agent connection if a telehub object has been deleted or has no spawn points.
2014-01-20 19:16:19 +00:00
36d8a24a86
force SOG update when converting legacy materials to ensure changes are persisted
2014-01-20 03:11:01 -08:00
95c926b2cd
delay texture entry parsing until absolutely necessary while converting legacy materials
2014-01-20 03:02:30 -08:00
28723beb0c
Add code to convert legacy materials stored in DynAttrs to new asset format and store them as assets
2014-01-20 02:57:08 -08:00
d1f16c4b4b
Check agent permissions before modifying an object's materials. Also, when creating a Material asset, set the current agent as the Creator.
2014-01-20 00:38:44 -08:00
68d83425c6
When asked to change the Material for one face, change only that face; not the default material
2014-01-20 00:38:43 -08:00
3018b2c5d7
Materials module: a) Store materials as assets; b) Finalized it (removed the "Demo" label; removed most of the logging); c) Enabled by default
...
Changed UuidGatherer to use 'sbyte' to identify assets instead of 'AssetType'. This lets UuidGatherer handle Materials, which are defined in a different enum from 'AssetType'.
2014-01-20 00:38:42 -08:00
ca0336d834
Renamed MaterialsDemoModule to MaterialsModule
2014-01-20 00:38:41 -08:00
e8273fa8ad
- Materials: support the viewer removing the material (in which case matsMap["Material"] is missing) - Reduced logging
2014-01-20 00:37:26 -08:00
90fa3202c6
varregion: remove debugging splat file saving that fills up the
...
maptile dir and causes errors.
2014-01-19 13:37:51 -08:00
5e6a47f13f
varregion: remove --noterrain and --noparcel parameters in 'load oar'.
...
Add --forceterrain and --forceparcel to 'load oar'. In order to not change
the operation of --merge (which does an object merge and suppresses terrain
and parcel information loading), added the --force* parameters to be used
when loading multiple oars to build up a varregion.
Added --rotation and --rotationcenter parameters to 'load oar' which apply a rotation to
the loaded oar objects before displacing. The rotation is in degrees (pos or neg)
and the center defaults to "<128, 128, 0>".
2014-01-19 12:45:16 -08:00
6fbfb47b92
varregion: add --noterrain and --noparcel to 'load oar'.
...
--noterrain suppresses the loading of the terrain from the oar.
--noparcels suppresses the loading of parcel information from the oar.
2014-01-19 11:03:08 -08:00
dd6db72939
varregion: add --displacement parameter to 'load oar'.
...
Adds displacment to all objects and terrain loaded from the oar.
As an example, if you have a 512x512 region and an old 256x256 oar, doing
load oar --displacement "<128,128,0>" oarFile.oar
will load the object (and terrain) into the middle of the 512x512 region.
If displacement is not specified, 'load oar' works like it always has.
If you have a 5
2014-01-19 10:09:43 -08:00
f127e4b4ee
Merge branch 'master' into varregion
2014-01-19 07:38:53 -08:00
4fb3d314b8
Fix casting error for float type INI file parameter parsing.
2014-01-19 07:37:14 -08:00
54a4b9eab4
varregion: Update Warp3D to properly handle varregions.
...
This includes additions to Warp3D:
Optional rendering of mesh and scupltie prims (INI parameter. Off by default)
Texturing of large prims (INI parameter. On by default)
Better garbage collection
2014-01-19 07:33:56 -08:00
813f0da00b
Add J2K decoder routine that converts directly to an image.
2014-01-19 07:32:41 -08:00
08fa0a6a8a
Fix casting error for float type INI file parameter parsing.
2014-01-19 07:26:55 -08:00
60de0bc3c2
varregion: split up generated maptile images for storage in map. This
...
makes maps for varregions show up properly.
2014-01-19 05:09:03 -08:00
d466446df3
Merge branch 'justincc-master'
2014-01-18 01:39:45 +00:00
e9454d4672
Following on from 50ea2e0, only fetch scene presence for check if lightscript function has failed initial IsEstateManagerOrOwner() check
2014-01-18 01:36:40 +00:00
50ea2e0d67
Fixed: Windlight functions caused an error if called when the script's owner isn't in the scene
2014-01-18 01:26:30 +00:00
0cbe5f8424
Remove redundant methods in FlotsamAssetCache
2014-01-18 00:55:49 +00:00
b9453a8f6f
implement CoreAssetCache.Check()
2014-01-18 00:52:36 +00:00
427ffd3387
implement GlynnTuckerAssetCache.Check()
2014-01-18 00:48:20 +00:00
fc7ccfdafa
Properly implement CenomeAssetCache.Check()
2014-01-18 00:30:23 +00:00
ee8ba1ab9a
Simplify FlotsamAssetCache.CheckFromMemoryCache()
2014-01-18 00:21:53 +00:00
d381da81d6
minor: Add method doc to IImproveAssetCache
2014-01-18 00:15:38 +00:00
97fbb8ed45
Elminate some copy/paste in FlotsamAssetCache.CheckFromFileCache() and use using() construct to ensure filestream is always closed
2014-01-18 00:12:12 +00:00
12bfce7b9f
elminate unnecessary asset != null check in FlotsamAssetCache.UpdateFileCache()
...
Passed in asset is always not null
2014-01-18 00:06:12 +00:00
b52b50ee56
minor: reinsert some method doc back into IEntityTransferModule
2014-01-17 23:36:23 +00:00
9fefbcf7fc
minor: since structs are values, assigning them to another variable copies it. Instantiation is unnecessary.
2014-01-17 23:32:37 +00:00
14c72d4a5b
Revert "Fixed: Windlight functions caused an error if called when the script's owner isn't in the scene"
...
This reverts commit 39e5785c0f
2014-01-17 01:58:10 +00:00
39e5785c0f
Fixed: Windlight functions caused an error if called when the script's owner isn't in the scene
2014-01-17 01:47:37 +00:00
4fa843ff19
Reorder checks in SP.CompleteMovement() to fix test failures
2014-01-16 23:44:17 +00:00
f467121c51
Merge branch 'justincc-master'
2014-01-16 23:33:30 +00:00
3bc669ffc7
Actually put IsChildAgent = true inside the lock, otherwise there is still a small window for race conditions on duplicate CompleteMovement calls
2014-01-16 23:31:50 +00:00
3ffd90496a
Prevent duplicate invocations or race dontision in SP.CompleteMovement()
...
This can happen under poor network conditions if a viewer repeats the message send
If this happens, physics actors can get orphaned, which unecessarily raises physics frame times
2014-01-16 20:23:31 +00:00
1a8b56fa87
Merge branch 'justincc-master'
2014-01-16 00:33:04 +00:00
2d9d6fe922
Can delete the Offline Messages sent to/from a user.
...
This is useful if the user is deleted.
2014-01-16 00:24:51 +00:00
46c2791fe2
In the offline message table, store the sender.
...
This data is useful for preventing abuse (e.g., someone who sends too many messages), or for deleting message if their sender has been deleted.
2014-01-16 00:16:33 +00:00
21bc799a17
Fixed offline IM
2014-01-16 00:10:10 +00:00
e99a7d879e
Remove old IInterRegionComms and references. This hasn't been used since 2009 and was superseded by ISimulationService
2014-01-16 00:05:04 +00:00
cc5cffc212
varregion: properly pack the region size parameters so he viewer will parse them.
...
This gets rid of the viewer crash when teleporting into varregions and allows
multiple, adjacent varregions (of the same size) with border crossings.
2014-01-11 22:00:52 -08:00
1eea6fd452
varregion: Debug messages for region crossing debugging.
2014-01-11 22:00:24 -08:00
3760d10cd0
varregion: remove unnecessary border checking code in ScenePresence.
2014-01-11 21:59:22 -08:00
1cf17a3cf7
Merge branch 'master' into varregion
...
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/SceneBase.cs
OpenSim/Services/Interfaces/IGridService.cs
OpenSim/Services/LLLoginService/LLLoginResponse.cs
(conflicts were debug statements that are commented out in master branch)
2014-01-11 08:52:23 -08:00
239b85d7ce
Fix crash in BulletSim which sometimes happens making a linkset physical
...
(like sitting on and activating a vehicle) and crossing borders.
This keeps better bookkeeping on compound shapes so BulletSim can
identify them when being freed.
2014-01-10 22:52:31 -08:00
b5ef585069
Merge branch 'justincc-master'
2014-01-11 01:22:42 +00:00
bc0ff5e7d4
Allow Boolean nodes in XML to be specified as "0/1". AuroraSim does that.
2014-01-11 00:54:41 +00:00
09e800f4b1
Merge branch 'justincc-master'
2014-01-10 20:46:00 +00:00
08f2fc63cd
Fixed llTextBox error message text
2014-01-10 20:43:24 +00:00
68cbccb288
Merge branch 'justincc-master'
2014-01-10 20:37:14 +00:00
9050c152b4
Dynamically adjust to the number of visual params sent.
2014-01-10 20:31:52 +00:00
da47bcae3e
When moving the root prim of an attachment: a) Change the attach position; b) Move the other prims in the reverse direction to compensate
2014-01-10 20:24:11 +00:00
5e72de1908
Merge branch 'justincc-master'
2014-01-10 20:19:38 +00:00
88f01a4130
When creating a coalesced object, set its permissions to the lowest-common-denominator of all the sub-objects
2014-01-10 20:01:08 +00:00
a94e1e0e08
When creating a coalesced object, set its Creator ID if all the objects have the same creator
2014-01-10 19:54:17 +00:00
91fd9c4670
Refactored: use a single function to apply an object's folded permissions to its main permissions
2014-01-10 19:50:03 +00:00
13f31fdf85
Refactored setting permissions when rezzing items: use the same function when rezzing from user inventory and prim inventory.
...
Also, fixed a bug: when rezzing a coalesced object from a prim's inventory, apply the coalesced object's name and description only to the first sub-object; not to all the objects in the coalescence. (This was already done correctly when rezzing from a user's inventory.)
2014-01-10 19:37:59 +00:00
32e9c16957
Merge branch 'justincc-master'
2014-01-08 01:04:26 +00:00
0155d42b80
If an agent is sitting, then do send the rotation in the agent update instead of zeroing it to resolve mouselook camera problems
...
Addresses http://opensimulator.org/mantis/view.php?id=6892
Thanks to tglion for this spot.
This resolves a recent regression from 17b32b764a
2014-01-08 00:54:39 +00:00
38148bd4b6
Some missing definitions needed for successful compilation.
2014-01-04 19:01:05 -08:00
8ff2ff1a36
Remove some chatty DebugFormat statements. No functional changes.
2014-01-04 19:01:04 -08:00
7e32313a49
varregion: Add region size to teleport event messages (EnableSimulator,
...
CorssRegion, TeleportFinishEvent).
Have Simian grid service return the region size.
Many teleport related debug log messages. Can be removed when teleport
works (like that's ever going to happen).
Conflicts:
OpenSim/Framework/RegionInfo.cs
2014-01-04 19:01:04 -08:00
004ecee314
varregion: send region size in LLLoginResponse.
2014-01-04 19:01:03 -08:00
d9848943a9
Add routines in Util.cs for conversion of region handles to region
...
locations and for the conversion of region world location to region
'region' location. These routines will replace all the arithmatic
scattered throughout OpenSimulator.
2014-01-04 19:01:03 -08:00
dd96fef940
Dynamically adjust to the number of visual params sent.
2014-01-04 21:18:37 +00:00
fd045d520e
Merge branch 'master' into varregion
...
Conflicts:
OpenSim/Framework/Constants.cs
OpenSim/Framework/RegionInfo.cs
OpenSim/Services/GridService/GridService.cs
OpenSim/Services/Interfaces/IGridService.cs
Most conflicts had to do with Util routines not in master branch yet.
2014-01-04 08:57:51 -08:00
9984ecf862
varregion: Add region size to teleport event messages (EnableSimulator,
...
CorssRegion, TeleportFinishEvent).
Have Simian grid service return the region size.
Many teleport related debug log messages. Can be removed when teleport
works (like that's ever going to happen).
2014-01-03 07:41:06 -08:00
eab9390e05
Initialize default region size in GridRegion in the no parameter constructor
...
as is used by the grid connector tests.
2013-12-28 07:20:14 -08:00
6869633d76
Add serialization/deserialization of region size to RegionInfo, GridRegion, and RegionData.
...
This does not modify interfaces or handling of variable sized regions. This only
enables the loading and storing of the region size and the reporting of the
region size in grid service responses.
The database tables already have the code to load and store the region size.
2013-12-28 06:58:15 -08:00
01c0bbf181
varregion: extract banned region logic into a class for cleanlyness.
...
Add 'not found' caching in EntityTransferModule.GetRegionContainingWorldLocation
so hitting borders and bad teleports do not continuiously hammer on the GridService.
2013-12-27 08:23:37 -08:00
2d2bea4aa7
varregion: many more updates removing the constant RegionSize and replacing
...
with a passed region size. This time in the map code and grid services code.
2013-12-26 22:45:59 -08:00
e5f7c8b6e8
varregion: add lots of DEBUG level log messages. Especially for teleport.
2013-12-24 12:31:26 -08:00
b40b57776b
varregion: remove unused Scene.HaveNeighbor routine. Its computation
...
was wrong for large regions anyway.
2013-12-24 12:28:54 -08:00
5c9fa15f30
varregion: fix bug where destination region is not found and object is
...
not restored to its original location.
2013-12-24 11:51:50 -08:00
540fa84842
Merge branch 'justincc-master'
2013-12-21 01:12:45 +00:00
2f94165dcc
Add lsl arg syntax checking for control event
2013-12-21 01:00:50 +00:00
f1cd813a29
refactor: rename internal lsl parser VectorDeclaration -> VecDeclaration for consistency
2013-12-21 00:49:01 +00:00
871ac5b16c
Add arg checking for at_target lsl event
2013-12-21 00:46:34 +00:00
a5e4780547
Add lsl event arg checking for at_rot_target
2013-12-21 00:37:56 +00:00
b757ab2586
Add lsl event argument checking for attach and on_rez
2013-12-21 00:08:36 +00:00
a01862509e
Merge branch 'master' into varregion
2013-12-20 06:52:28 -08:00
68773ee7c4
Merge branch 'justincc-master'
2013-12-19 01:41:04 +00:00
e298bf41ff
Add missing viewer param elements for butt and breast physics.
...
Patch from http://opensimulator.org/mantis/view.php?id=6864 except with tabs replaced by spaces
Thanks cinderblocks!
2013-12-19 01:24:36 +00:00
a5ca15c428
Create regression test TestSendAgentGroupDataUpdate() for groups agent data sending
2013-12-18 23:35:38 +00:00
6937eec258
Merge branch 'master' into varregion
...
Add new region crossing code to varregion
Conflicts:
OpenSim/Region/CoreModules/Framework/EntityTransfer/EntityTransferModule.cs
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2013-12-17 06:18:13 -08:00
141d771a93
Fix issue with editing notes for other avatars
2013-12-16 17:36:21 -05:00
b03ec6137f
Populate user preferences with UserAccount email if it is present, else return an error indicating no email is on record for the user.
2013-12-16 17:36:04 -05:00
fe01e7d1cc
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2013-12-16 22:11:03 +00:00
f69e91dc2d
This is the acutal sitting avatar crossing code. This commit implements the
...
actual crossing mechanics for seated avatars, using the supporting code from
the previous commits. Physics is not supported yet, although some few bits
for them are already in place due to the earlier code drops. With this commit,
crossing sitting avatar by "editing" the prim across the border, by using
llSetPos or keyframe motion may already be possible. Vehicles will come next.
2013-12-16 22:08:02 +00:00
13a9a4b653
varregion: rename 'LegacyRegionLocX' back to 'RegionLocX' and same for Y and Z.
...
Rename 'RegionWorldLocX' to 'WorldLocX' and same for Y and Z.
This keeps the downward compatibility and follows the scheme of 'region'
and 'world' location naming that is happening in the Util module.
2013-12-14 07:53:01 -08:00
00e632ec3a
Merge branch 'justincc-master'
2013-12-14 02:49:23 +00:00
51da52f904
Extend TestLlGetNotecardLine() regression test to contain chars that are two bytes in utf8
2013-12-14 02:48:29 +00:00
38d7d46c17
Merge branch 'justincc-master'
2013-12-14 02:33:08 +00:00
957449e62c
ParseNotecardToList() returned data past end of notecard text (mantis #6881 ).
2013-12-14 02:25:28 +00:00
ee163b5751
Merge branch 'justincc-master'
2013-12-14 02:23:12 +00:00
e7a294e739
Wrap analysis of the particle system in the UUID Gatherer in a separate try/catch as sometimes it appears that this can be corrupt.
...
As per Oren's suggestion.
2013-12-14 01:48:03 +00:00
996a6c2eea
After previous discussion, put eye-catcher 'SCRIPT READY' messages to console rather than log as warning
...
The problem with logging at warn is that these aren't actually warnings, and so are false positives to scripts that monitor for problems.
Ideally, log4net would have a separate "status" logging level, but currently we will compromise by putting them to console, as they are user-oriented
2013-12-14 01:34:28 +00:00
63ccc3dbf5
Convert if-blocks to return statements in small functions such as GetStartParameter().
2013-12-14 01:20:24 +00:00
bf826699a5
Merge branch 'justincc-master'
2013-12-14 01:13:17 +00:00
d656ec2a07
Make WindParamSet success a console message rather than a log message.
...
This effectively disables the log message as requested by http://opensimulator.org/mantis/view.php?id=6890
2013-12-14 01:07:37 +00:00
5ddd818238
minor: Make wind console commands print out to console rather than log
2013-12-14 00:50:06 +00:00
bcb8c4068e
Comment out sit position checks in TestSitAndStandWithSitTarget() in SP and NPC tests until positions are known to be stable.
...
Also resolve issues with NoSitTarget() tests where I was trying to use a destroyed PhysActor
2013-12-14 00:36:25 +00:00
d2d4ae541b
Fix build break in test from previous commit 54cc229 - hadn't realized ScenePresence inst var name was slightly different
2013-12-14 00:19:04 +00:00
54cc229768
Fix TestSitAndStandWithNoSitTarget NPC and SP tests.
...
These stopped working because current code calculates sit heights based on avatar physics rather than appearance data.
Also changed BasicPhysics to not divide Z param of all set sizes by 2 - there's no obvious good reason for this and basicphysics is only used in tests
2013-12-14 00:10:32 +00:00
11f177d6a8
Eliminate unnecessary line from my previous commit 1d605642
2013-12-13 23:30:08 +00:00
1d605642f7
Refix sitting on child prims by reinserting relevant code back into SP.HandleAgentSit()
2013-12-11 23:59:52 +00:00
82ebb86d58
Replace proprietary file header with BSD one
2013-12-11 01:51:57 +00:00
92aad6f1bb
Add missing files *blush*
2013-12-11 01:44:03 +00:00
5b73b9c4a8
Committing the Avination Scene Presence and related texture code
...
- Parts of region crossing code
- New bakes handling code
- Bakes now sent from sim to sim without central storage
- Appearance handling changes
- Some changes to sitting
- A number of unrelated fixes and improvements
2013-12-11 01:39:56 +00:00
3df8990e6f
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2013-12-11 00:14:16 +00:00
97934e00e6
This is the Avination Entity Transfer Module. Surprisingly, it still compiles
...
but I don't know if it runs. Will probably crash and burn as the supporting
code isn't there yet.
2013-12-11 00:12:36 +00:00
0875050161
Add console utility commands "scale scene" and "translate scene". Note that repeated use of these commands will induce floating point accumulation errors. Please back up your region before using.
2013-12-10 13:57:18 -08:00
8f221a3077
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-12-06 16:25:26 -08:00
c0380d1bfe
apparently mono DeflateStream has no CopyTo method =(
2013-12-06 16:24:44 -08:00
5047bd7b44
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-12-06 16:02:03 -08:00
4058e5f709
Fixed misleading comment
2013-12-06 16:01:29 -08:00
aba2a44453
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-12-06 15:58:51 -08:00
1496de7ce9
use System.IO.Compression.DeflateStream for mesh decompression in an attempt to reduce mesh asset decoding failures
2013-12-06 15:58:19 -08:00
1842388bb4
Add support for user preferences (im via email)
2013-12-06 02:52:13 -05:00
4eb52eb19e
Merge branch 'master' into varregion
2013-12-05 21:07:44 -08:00
04f8fc1ce9
Adding profile partners fix to SQLite and PgSQL drivers
2013-12-05 20:25:28 -05:00
823a175f07
Stop writing partner id to record when updating profile data. This should be changed only by admin in backend.
2013-12-05 20:06:04 -05:00
9b76a46df0
Reversing back to the row["ColumnName"] case field name. http://opensimulator.org/mantis/view.php?id=6868
2013-12-06 00:41:02 +00:00
bb4f4d9480
minor: Use enums for setting inv/asset types on data upload rather than magic numbers
2013-12-06 00:38:18 +00:00
16aaba77d4
Properly set InventoryType.Snapshot when a snapshot is uploaded
...
Resolves http://opensimulator.org/mantis/view.php?id=6857
This prevents the inventory service complaining later about an attempt to change an invariant
2013-12-06 00:30:44 +00:00
17b32b764a
Fix regression where mouse look flight direction no longer worked by zeroing x/y rot before sending agent updates, instead of before any agent update processing
...
It turns out that the x/y rot data in mouselook is needed to implement this and to push the avatar against the ground if walking in mouselook.
Doing this in the terse send so that we preserve mouselook rotation information
2013-12-05 02:10:46 +00:00
62a2d7836f
Ignore X and Y body rotations when sent by mouse look.
...
Fixes http://opensimulator.org/mantis/view.php?id=3274
When not in mouselook, avatar only sends rotations around the Z plane (since that's the only way an avatar can rotate).
However, in mouselook it also sends X and Y information. But sending X and Y in terse updates causes issues with wrong camera movement in mouselook.
So strip out X and Y components for now. If this is an issue, then could strip out before sending avatar terse update, though this generates more cpu work.
Thanks to mirceakitsune for suggesting an initial fix
2013-12-03 02:27:40 +00:00
31bacfbb63
Merge branch 'master' into varregion
2013-12-01 15:51:42 -08:00
6cd0d7a62b
varregion: Add MaxRegionSize constant and enforce in RegionInfo.
...
Intermediate checkin of changing border cross computation from checking
boundry limits to requests to GridService. Not totally functional.
2013-11-30 15:28:39 -08:00
8ebad90800
Actually use the SP.AgentControlStopSlowWhilstMoving parameter intoroduced for slow walk/run in 4cfe02a rather than the magic number
2013-11-30 01:56:46 +00:00
96018afab4
Remove unused SP.Updated flag, which appears unused for many years and was only set true once and never reset
2013-11-30 01:52:45 +00:00
4cde02a2a3
Implement most effects of AGENT_CONTROL_STOP
...
AGENT_CONTROL_STOP is specified to SP.HandleAgentUpdate if the user holds down the space bar on a viewer.
For a stopped avatar, this prevents fly or walk/run (though not rotate) until released.
For a walking/running avatar, this reduces movement to half speed.
For a flying avatar, this stops the avatar.
These are observed behaviours on the LL grid - there was no previous OpenSimulator implementation
This commit introduces an optional parameter to SP.AddNewMovement(), which means that it will no longer compile on .NET 3.5 or earlier versions of Mono than 2.8
Currently, this does not work for jumping, and if used whilst flying the avatar continues the fly animation even though it does not move
2013-11-30 01:44:30 +00:00
4bd4f1cd83
Remove nudgehack from SP.HandleAgentUpdate by making MovementFlag a uint rather than a byte
2013-11-30 01:14:12 +00:00
8b3a4367ea
Still send CameraEyeOffset in UDP SendSitReponse even if at offset is Vector3.Zero
2013-11-29 02:51:35 +00:00
5f0e763062
Remove unused sp.ParentPosition, which has not been used for some time
2013-11-29 02:48:59 +00:00
84bfde3bdf
Comment out debug sit message accidently left active
2013-11-29 02:45:14 +00:00
ca079c378a
Merge branch 'link-sitting'
2013-11-29 02:41:32 +00:00
868c0c2746
Fix regression where sitting on ground stopped working.
...
This was due to the PhysicsActor no longer being recreated on stand from ground.
2013-11-29 01:56:49 +00:00
f9193e3c51
Restore SP.AbsolutePosition to properly return actual absolute position when sitting
2013-11-29 01:50:12 +00:00
a64377149d
Add parameter checking for land_collision, land_collision_start and land_collision_end lsl events
...
Wrong number of parmeters now generates syntax error on compile, as seen on LL grid
2013-11-29 00:44:53 +00:00
109136c074
varregion: add ITerrainChannel.GetHeightAtXYZ() for eventual mesh terrain.
...
Implementation of same in TerrainChannel.cs.
Check for bounds in TerrainChannel[x,y] to prevent array access exceptions.
2013-11-28 08:22:41 -08:00
7aa00632b9
varregion: many replacements of in-place arithmetic with calls to
...
the Util functions for converting world addresses to region addresses
and converting region handles to locations.
2013-11-28 08:20:16 -08:00
73dadef8df
Change the log level for the LOGIN DISABLED and LOGIN ENABLED messages is
...
the RegionReady module to be warn so that the message will show up in the
log for simulators running in a more production mode (knowing when logins
are functional is useful).
2013-11-27 12:01:09 -08:00
e52a8d388f
"rotate scene" command now uses Constants.RegionSize / 2 to pick the center of rotation and center can be optionally overridden in the command line
2013-11-26 21:07:37 -08:00
0785210e29
Fix stand positions rather than having the stand jump to the root prim.
2013-11-27 02:08:22 +00:00
5a9ec0748b
add a "rotate scene" console command. Seems to work for prims/sculpts/mesh but not for foliage, don't know why. Also doesn't work on terrain. Successive use of this command will likely introduce floating point error accumulation. Back up your region before using it :)
2013-11-26 17:18:44 -08:00
a3c72dafe6
Only translate linked prim specified offset pos by the link prim rotation, not any specified avatar rotation as well.
...
Don't translate root prim position by avatar rotation.
2013-11-26 01:40:55 +00:00
36d146bf27
fix position changes when sitting on a prim with position and/or orientation explicitly specified
2013-11-26 00:43:35 +00:00
0ad45531a1
Corrected case to get columns from Regions table from PostgreSQL http://opensimulator.org/mantis/view.php?id=6865
...
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2013-11-25 18:33:49 -05:00
3193bcaae1
Merge branch 'master' into varregion
2013-11-24 07:23:12 -08:00
60e049ea39
Revert "Fix issue where sitting on non-root linked prims would send camera to wrong position in third-person and mouselook"
...
Reverting to place on separate branch
This reverts commit ff4e7de776
2013-11-23 02:31:39 +00:00
1999b218fd
Revert "Add line accidentally left out of recent non-root prim sit fix"
...
Reverting to place on new branch
This reverts commit ed1029712a
2013-11-23 02:31:17 +00:00
a68d1fad73
Revert "Still send CameraEyeOffset in UDP SendSitReponse even if at offset is Vector3.Zero"
...
This reverts commit 9bdd3dc7de
2013-11-23 02:29:14 +00:00
eb172be541
Revert "Fix non-root prim sit positions for prims where a sit target has been specified as well."
...
Revert to place on separate branch for now
This reverts commit 70e651a8d1
2013-11-23 02:28:30 +00:00
910f07dffa
Revert "Refix fix for sitting on non-root linked prims with explicit sit targets."
...
This reverts commit 78649eb099
2013-11-23 02:27:26 +00:00
5aa3236ebe
Revert "fix avatar rotation when sitting on a linked part"
...
Reverting for now to place on separate branch
This reverts commit 65304260af
2013-11-23 02:27:03 +00:00
b9e42aeb6e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-23 02:09:54 +00:00
65304260af
fix avatar rotation when sitting on a linked part
...
Need to take into account rotation of linked prim now that we are always specifying sits wrt the root prim
2013-11-23 02:09:03 +00:00
f3f3d390f7
Fixed the update StoreRegionWindlightSettings() wasn't updating regionwindlight table, raising PrimaryKey violation;
...
Signed-off-by: Fernando Oliveira <fernando@oliveira.eti.br>
Signed-off-by: Michael Cerquoni <nebadon2025@gmail.com>
2013-11-22 20:48:12 -05:00
78649eb099
Refix fix for sitting on non-root linked prims with explicit sit targets.
...
I forgot that m_post is being set inconsistently between non-explicit and explicit ragets
2013-11-23 01:35:08 +00:00
70e651a8d1
Fix non-root prim sit positions for prims where a sit target has been specified as well.
2013-11-23 01:32:29 +00:00
ed1029712a
Add line accidentally left out of recent non-root prim sit fix
...
Original commit is ff4e7de7
2013-11-23 01:18:07 +00:00
9bdd3dc7de
Still send CameraEyeOffset in UDP SendSitReponse even if at offset is Vector3.Zero
...
As far as I can see it's valid to change the eye offset even if you aren't changing the at target.
2013-11-23 01:12:20 +00:00
9f4a548a49
Fix false positive test failure in TestRepeatSameDrawContainingImageReusingTexture() and TestRepeatSameDrawContainingImage() if localhost has a webserver set up.
...
Use 0.0.0.0 instead of localhost
2013-11-23 01:04:31 +00:00
ff4e7de776
Fix issue where sitting on non-root linked prims would send camera to wrong position in third-person and mouselook
...
We now specify sits as offsets from the root prim, as the viewer expects.
2013-11-23 00:53:09 +00:00
c896b4179e
Added admin_authenticate_user command
2013-11-20 00:09:32 +00:00
b44c69807d
Fix bug where "show modules" would accidentally list all the shared modules again as "non-shared"
...
Addresses http://opensimulator.org/mantis/view.php?id=6860
2013-11-19 23:53:15 +00:00
f9984a9685
rename private field ACD.ViewerInternal to m_viewerInternal in line with conventions used elsewhere in code
2013-11-19 23:39:52 +00:00
b71952df49
Stop AgentCircuitData.Viewer.get() from throwing an error if no Viewer has been set.
...
Continue to return null instead.
2013-11-19 23:36:44 +00:00
9ba5a7e190
Normalize viewer version string to accomodate new style version reporting in the viewers
2013-11-19 23:29:10 +00:00
f94d07f2e2
Add regression test to check that specifying a non-existent event raise a syntax error
...
This was the case before any of the recent changes
2013-11-16 03:02:57 +00:00
79c1ed8cb9
Add syntax checking for no_sensor() no-arg event
2013-11-16 03:00:03 +00:00
ec4d96acc9
refactor common code out of no argument LSL event regression tests
2013-11-16 02:58:06 +00:00
edd7e19463
If anything other than a single integer is specified for events that only take a single integer, generate a syntax error on LSL script compile rather than an exception later on.
...
This applies to events changed, collision, collision_start, collision_end, on_rez, run_time_permissions, sensor, touch, touch_start, touch_end
2013-11-16 02:50:14 +00:00
62006baaef
Make state_exit, moving_end, moving_start, not_at_rot_target, not_at_target and timer LSL events generate a syntax error if inappropriately given arguments.
...
This matches behaviour seen on the LL grid and a previous change for state_entry.
These are all the events which should take no arguments
2013-11-16 01:30:23 +00:00
d728c1beb2
refactor LSL_EventTests.TestStateEntryEvent into single method to test compile
2013-11-16 01:25:25 +00:00
ecfb78dd16
minor: Use default(UUID) in rez attachment failure error logging rather than (UUID)null
...
Patch from http://opensimulator.org/mantis/view.php?id=6843
Thanks Kira.
2013-11-15 23:16:12 +00:00
346644016c
If HGSuitcaseInventoryService.GetRootFolder() fails to create a suitcase folder when required, then don't try to store the null and perform other operations on it.
...
Patch from http://opensimulator.org/mantis/view.php?id=6844
Thanks Kira.
2013-11-15 23:10:59 +00:00
604b39cea9
Merge branch 'master' into varregion
2013-11-15 14:56:13 -08:00
7cab41f422
refactor: replace verbose checks with String.IsNullOrEmpty where applicable.
...
Thanks to Kira for this patch from http://opensimulator.org/mantis/view.php?id=6845
2013-11-15 21:45:08 +00:00
b4932bda2a
If a local land ID is given to the "land show" command, then output to console the full details of that parcel.
...
Using "land show" without a land ID still outputs a summary of parcels in the region
2013-11-15 00:16:33 +00:00
d67236c09d
Merge branch 'master' into varregion
2013-11-13 16:10:25 -08:00
8114ae0f8b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-13 23:27:25 +00:00
7da10850b0
Fix bug where removing a physical linkset would only decrement the Active Objects statistic by 1 instead of by the number of prims removed.
...
Unlike LL, OpenSimulator currently uses this stat to record the number of prims in the physics simulation, even when they are at rest.
Added regression test for this case.
2013-11-13 23:25:54 +00:00
869a23e223
Update OpenSim.32BitLaunch.exe and Robust.32BitLaunch.exe to .NET 4 versions.
...
Also fixes some issues in associated solution files
2013-11-13 01:07:14 +00:00
e2a1fa806d
varregion: extend TerrainModule to use the region size from RegionInfo
...
rather than using Constants.RegionSize. This allows loading and saving
of terrain heightmaps that match the size of non-legacy sized regions.
2013-11-10 21:12:17 -08:00
c12e68e34d
varregion: fix GetLandObject error return and initialization of square
...
land object bitmaps. This fixes creation of child presences and the
editing of parcels.
Also lots of commented out debugging messages.
2013-11-10 19:52:31 -08:00
7061784cc6
Merge branch 'master' into varregion
2013-11-08 20:55:28 -08:00
beeec1c467
varregion: elimination of Constants.RegionSize from all over OpenSimulator.
...
Routines in Util to compute region world coordinates from region coordinates
as well as the conversion to and from region handles. These routines have
replaced a lot of math scattered throughout the simulator.
Should be no functional changes.
2013-11-08 20:53:37 -08:00
a7a837550e
varregion: Massive work to LandManagementModule and LandObject to
...
handle variable sized regions. Many changes for both the region and parcels.
Most of the constant "4" (for the 4x4 parcel units) have been replaced
with symbols and math.
2013-11-08 20:51:09 -08:00
fd24147afa
Add initial test for checking that specifying a parameter in LSL state_entry() generates a syntax error.
...
Same for other events to follow at a later date.
2013-11-09 00:36:05 +00:00
5cef8bf64e
Make admin_save_oar request submit a request ID and log this for tracking.
...
Previous behaviour of always logging 'name' is unhelpful since this actually an error message parameter which is only filled out if an error has occurred
2013-11-08 00:31:26 +00:00
f7bd0da026
Merge branch 'master' into varregion
2013-11-06 06:32:11 -08:00
0b4577d5b0
add support for particle glow LSL functions
2013-11-05 23:48:44 -08:00
709814c194
add support for particle blending LSL functions
2013-11-05 23:38:43 -08:00
a75ce7423c
Merge branch 'master' into varregion
2013-11-05 21:42:27 -08:00
d0854e4ace
varregion: properly sense size of terrain heightmap and store as
...
compressed 2D database blob if a varregion.
2013-11-05 21:33:02 -08:00
26fd29622d
Added sending (for now hard-coded) sim isze in SendMapBlockSplit()
2013-11-06 03:52:04 +01:00
8e1bf55e7b
Add IncomingPacketsResentCount clientstack statistics
...
This records how many packets were indicated to be resends by clients
Not 100% reliable since clients can lie about resends, but usually would indicate if clients are not receiving UDP acks at all or in a manner they consider timely.
2013-11-06 01:02:20 +00:00
caf2abe311
Record individual region bot disconnects in pCampbot log
2013-11-05 23:32:26 +00:00
fb23f78928
minor: comment out "SetLastPosition" GridUserService debug message for now.
2013-11-05 23:18:09 +00:00
2d315ec207
Fix a race condition where pCampbot actions could continue even if a bot had disconnected.
2013-11-05 20:58:52 +00:00
c931b16c1f
Merge branch 'master' into varregion
2013-11-04 22:12:57 -08:00
f2810bf03a
varregion: add plumbing to pass region size from Scene down to the
...
physics engine.
Older physics engines will default to the legacy region size.
Update BulletSim to use the new region size information.
2013-11-04 22:10:54 -08:00
cd1a23fc14
varregion: remove uses of region size constant. In particular, update scene
...
to check for border crossings based on the size of the region.
2013-11-04 22:09:52 -08:00
ac94dc8a14
varregion: remove unused terrain serialization code in SQLite and PGSQL modules
2013-11-04 22:06:20 -08:00
9bf363e9be
varregion: send the proper terrain patch layer code for large terrain.
...
Code cleanups.
2013-11-03 08:14:51 -08:00
79b031bd0c
varregion: send region size in LLLoginResponse.
2013-11-02 15:42:26 -07:00
6df7d4219d
varregion: add linkage for region size in creations and conversions
...
of GridRegion. New variables for size and code to initialize same.
2013-11-02 15:40:48 -07:00
f66737fe56
varregion: Enforce the configuration of square regions in RegionInfo.cs.
2013-11-02 15:36:16 -07:00
2b069a3b1e
If the LSL state_entry() event definition contains any parameters, then generate syntax error as seen on the LL grid
...
This is done through the parser and so generates the same syntax error message if any parameters are wrongly specified for this event.
We were already enforcing event names in the parser.
This is only for state_entry so far as an initial test of the approach - appears to work correctly.
2013-11-02 00:39:12 +00:00
92c06a5d0b
varregion: fix lawn-mower terrain fill so it works for non-square regions.
...
Add some debugging logs on region creation to report region size.
2013-11-01 16:37:27 -07:00
976530569a
varregion: enforce multiple of 256 for region size when parameters fetched from user.
...
Output info and warning messages for non-legacy region sizes.
2013-11-01 16:06:19 -07:00
7faf286d00
add null check for jpeg2000 sculpt image decode failure. Note: the j2kDecodeCache folder should be cleared after updating to this revision so that sculpts containing alpha can be re-decoded and successfully meshed.
2013-11-01 13:45:09 -07:00
ff5885ab23
varregion: push TerrainData implementation up and down the database storage stack.
...
Implement both LoadTerrain and StoreTerrain for all DBs.
Move all database blob serialization/deserialization into TerrainData.
2013-11-01 11:35:31 -07:00
ce94f990bb
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-01 01:42:43 -07:00
f4ded3af63
discard alpha in 4-plane sculpt textures before generating physics proxy mesh
2013-11-01 01:40:56 -07:00
db32e5d304
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-11-01 02:05:12 +00:00
c6395240f0
For individual bots, seed random number generator with a random number from BotManager rather than Environment.Tickcount
...
Otherwise, since bots are now created all at once, a bunch will get exactly the same tickcount and hence number sequences
2013-11-01 02:04:04 +00:00
cc73ef4eb9
add new particle system blending rule enumerations
2013-10-31 17:49:01 -07:00
cc7065f9ee
minor: change "bot" pCampBot help cateogry to "Bots"
2013-11-01 00:04:18 +00:00
4c4a1cf715
Start counting resent packets in the places that I missed when the stat was first added a few commits ago
2013-10-31 23:59:22 +00:00
50794c9008
minor: remove mono compiler warnings in AvatarPickerSearchModule and UploadBakedTextureModule
2013-10-31 23:51:01 +00:00
3d5a7e9b19
Add OutgoingPacketsResentCount clientstack stat.
...
This allows one to monitor the total number of messages resent to clients over time.
A constantly increasing stat may indicate a general server network or overloading issue if a fairly high proportion of packets sent
A smaller constantly increasing stat may indicate a problem with a particular client-server connection, would need to check "show queues" in this case.
2013-10-31 23:45:52 +00:00
b7c57294cc
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-31 23:45:19 +00:00
eb52d346c0
add new LSL constants associated with new "ribbon", "glow", and "blend" particle system functionality. Note that this does *not* complete required server side changes for implementing the new particle system
2013-10-31 16:13:03 -07:00
0e07fad2e1
minor: update pCampbot usage/help statement
2013-10-31 20:19:57 +00:00
39777db8ef
varregion: fix problem of X/Y dimensions swapped and incorrect terrain
...
compression base computation.
Complete replacement of float[] for terrain heightmap with TerrainData instance.
2013-10-31 09:24:06 -07:00
fdd1c63c3c
Make "fcache status" command also display information on disk/mem cache hit rate that is currently only displayed if LogLevel >=1 in [AssetCache] config
2013-10-30 18:57:51 +00:00
28f36d8db5
Put fcache commands output to console, not log
2013-10-30 18:32:53 +00:00
edaf0a98d6
Give the caller AddMapTile a valid reason response if this failed due to blank response from server or connection failure.
...
Raise log lines which indicate problems to warning from debug
2013-10-29 23:37:22 +00:00
26c2d9e627
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-28 23:48:43 +00:00
39de7614ec
Remove legacy sqlite lines added internally by OpenSimulator to the [Startup] section.
...
These are long unused but confusingly will be seen in the [Startup] section on a "config save".
2013-10-28 18:03:34 +00:00
2be0347f50
Merge branch 'master' into varregion
2013-10-28 09:30:26 -07:00
93d5d66fbd
BulletSim: update collision flags to make sure they fit in the shorts provided.
2013-10-26 21:20:19 -07:00
df76e52310
minor: Add commented out code for apparent passing of texture IDs in ObjectProperties UDP replies to viewer
...
Not yet shown that this is used or resolves a bug where not all textures appear on objects with an "XML with textures" upload from singularity 1.8.3
Proper texture entries are actually present and appear properly on relog, but not on select from viewer until at least one face texture is changed.
2013-10-24 23:00:02 +01:00
31989bd51e
Show texture ids for full object/part info console commmds
2013-10-24 21:29:57 +01:00
cccdfcb59e
Comment out LLUDPServer.BroadcastPacket() to reduce code complexity. Appears to be a never used method.
2013-10-24 00:37:49 +01:00
5d61c4039d
Only set the data present event if we actually queued an outoing packet (not if we sent immediately)
2013-10-24 00:33:14 +01:00
511122834b
BulletSim: change collision flags for groundplane to not interact with static objects.
...
Reorder collision flag setting code for terrain to fit pattern used elsewhere.
2013-10-23 16:07:03 -07:00
84a149ecbf
Call ScriptSleep() instead of llSleep() in routine for llEmail.
...
Signed-off-by: teravus <teravus@gmail.com>
2013-10-18 14:30:05 -05:00
0094971186
After finishing to edit an attachment, let other avatars see the changes. (The changes weren't visible before because updates to attachments aren't sent while the attachment is selected.)
2013-10-17 23:10:16 +01:00
67ffb64764
Corrected estateID to EstateID on getEstates function at PGSQLEstateData.cs
2013-10-16 21:58:22 -05:00
f83343d302
* One More thing, add an appdomain data element to ensure that we don't duplicate the assembly resolving.
2013-10-16 21:20:11 -05:00
8fdf70b87e
* Fixes mantis mantis 0006803 [PGSQL] - Simulator crashes - Mono.Security.dll missing. The root of the issue is that the Postgres driver relies on Mono.Security.dll from the mono project. Unfortunately, when using Mono, including the dll in the distribution causes conflicts. This solution puts Mono.Security.dll in bin/lib/NET/ and, if windows .NET is the runtime, informs the assembly loader to load bin/lib/NET/Mono.Security.dll when .NET is scanning for the Mono.Security namespace. On Mono, the included Mono.Security assembly is ignored.
2013-10-16 20:16:29 -05:00
c581506058
varregion: update PGSQL driver for storing variable terrain size blobs.
2013-10-16 08:13:06 -07:00
8937a2244d
Merge branch 'master' into varregion
2013-10-16 07:53:44 -07:00
97bc5263de
varregion: move the compressed heighmap compression factor from
...
Constants into TerrainData.
Save compression factor with the terrain blob in the database.
2013-10-16 07:52:30 -07:00
766a31431e
BulletSim: implement the SL bug where VEHICLE_HOVER_UP_ONLY disables
...
the vehicle buoyancy if the vehicle is above its hover height.
This is a known misfeature of this vehicle flag which has been accepted
since it would break too many implementations. The problem is noticed
when creating a jetski-like vehicle that jumps over sand bars. A boat
normally is configured with neutral buoyancy and hovering at water
height. When it jumps the sandbar, it needs to have gravity applied
to get back to water level.
2013-10-15 17:02:22 -07:00
d0c1780839
Fixed rezzing coalesced objects from a prim's inventory
...
Previously only the first object in the Coalesced Object was rezzed. Now all the objects are rezzed.
2013-10-15 23:59:16 +01:00
d82d6bb1ec
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-10-15 23:18:50 +01:00
5ca7395e17
Added support for attachments to group notices when using Flotsam groups.
2013-10-15 23:07:49 +01:00
3e1ca2bd21
* Fixes mantis #6802 Simulator crashes whist loading (lighshare enabled)
...
* Please test
2013-10-15 11:55:08 -05:00
f106ba87ca
Made terrain uploads thread-safe
2013-10-15 00:12:56 +01:00
ff8a768258
Fernando Oliveira's Postgress SQL Server Data Connector as a single commit.
...
* Added PostGreSQL support
* Added MySQL/MySQLXGroupData.cs
* PostgreSQL data access implementation
* PostgreSQL dll binarie and RegionStore.migrations
* Migrations Scripts from MSSQL to POSTGRES
* Postgres SQL Type fixes
* Postgres SQL Connection string
* Data type issues
* more fixes
* tests and +tests
* UUID x string - FIGHT!
* Fixed PG types to internal csharp types
* More data type fix (PostgreSQL fields are case sensitive) :(
* more field case sensitive fixes
* changed the migration files to be case sensitive for fields.
* fixed fields case
* finished converting, now search for hidden bugs.
* some more fixes
* bool type fixed
* more case fixes;
* creatorID case fixed
* case fields fixed
* fixed default now() for TMStamp fields with don't allow nulls.
* fix case sensitve for Region name and Estate name
* fixed case for names for search
* fix class name Error
* Bug fixed on select and migrations
* Un-Reverting my change due to Postgres issue with the ILIKE function
* Fixed some issued for Diva Distro
* Fixes for integration with Diva Distro
* Added System.Core to prebuild.xml for PG project
* Configured to make DIff for Push to OpenSim Project
* Diffs only to PostgreSQL mods.
2013-10-12 16:33:45 -05:00
8b5e2f2cd2
BulletSim: Fix snap back from edge of region problem. Mantis 6794.
2013-10-11 13:29:43 -07:00
75f63ecfcd
* Add a session concurrency option per key. Allows developer/config to specify number of concurrent requests on a service.
2013-10-09 22:21:25 -05:00
e7ea053c4a
* Remove a test *cleanup*
2013-10-07 23:52:44 -05:00
1df58d04b1
* Move the BasicDOSProtector.cs to OpenSim.Framework (all useful classes belong there.....)
...
* Add an IsBlocked(string Key) method so it can be used more generically. (think.. if we want to rate limit login failures, we could have a call in the Login Service to IsBlocked(uuid.ToString()) and ignore the connection if it returns true, if IsBlocked returns false, we could run the login information and if the login fails we could run the Process method to count the login failures.
2013-10-07 23:48:24 -05:00
75fdd6054d
* Refactor
...
* Break out common BasicDOSProtector code into separate class.
2013-10-07 23:19:50 -05:00
f76cc6036e
* Added a Basic DOS protection container/base object for the most common HTTP Server handlers. XMLRPC Handler, GenericHttpHandler and <Various>StreamHandler
...
* Applied the XmlRpcBasicDOSProtector.cs to the login service as both an example, and good practice.
* Applied the BaseStreamHandlerBasicDOSProtector.cs to the friends service as an example of the DOS Protector on StreamHandlers
* Added CircularBuffer, used for CPU and Memory friendly rate monitoring.
* DosProtector has 2 states, 1. Just Check for blocked users and check general velocity, 2. Track velocity per user, It only jumps to 2 if it's getting a lot of requests, and state 1 is about as resource friendly as if it wasn't even there.
2013-10-07 21:35:55 -05:00
86bf79aa2b
Merge branch 'master' into varregion
2013-10-07 13:58:17 -07:00
7416809077
varregion: plug in TerrainData class and modify TerrainModule and LLClientView to use same. This passes a terrain info class around rather than passing a one dimensional array thus allowing variable regions. Update the database storage for variable region sizes. This should be downward compatible (same format for 256x256 regions).
2013-10-07 13:57:40 -07:00
25ae59b9eb
varregion: remove scattered use of Constants.RegionSize by having routines reference RegionInfo.RegionWorldLoc?.
2013-10-07 13:57:30 -07:00
9b150194f6
varregion: add new TerrainData and TerrainCompressor routines. TerrainCompressor needed to replace the one in libopenmetaverse that doesn't know about the larger terrain packets.
2013-10-07 13:57:16 -07:00
31246ecd04
* Added a unique and interesting WebSocket grid login processor by hijacking the LLSD login code. This sends the data through the normal login channels and spits out a JSON object back that mimics the login response. Feel free to comment on the best way to set this up as a config option.
2013-10-04 20:53:01 -05:00
85593d8d25
* Add an initial complete frame timeout to the WebSocket processor to make it easier to write WebSocket service code that is resistant to Denial of Service attacks.
2013-10-04 20:37:59 -05:00
083eb7679b
Added SimulatorFeatures/OpenSimExtras: say-range, whisper-range, shout-range, at the request of Singularity dev Liru-Dargon
2013-10-04 17:32:17 -07:00
44580e2233
Update an AssmblyVersion property that I missed to 0.8.0
2013-10-04 23:36:28 +01:00
42bdf44658
Bump OPenSimulator version and assembly versions up to 0.8.0 Dev
2013-10-04 23:33:47 +01:00
970249a3c7
Add OnChatToNPC and OnInstantMessageToNPC messages to NPCAvatar to allow region modules to directly subscribe to chat and messages received by NPCs
...
Currently still requires INPC from NPCModule.GetNPC() to be cast to an NPCAvatar.
2013-10-04 19:40:43 +01:00
8c1d80fdfd
varregion: serious rework of TerrainChannel:
...
-- addition of varaible region size in X and Y
-- internal storage of heightmap changed from double[] to short[]
-- helper routines for handling internal structure while keeping existing API
-- to and from XML that adds region size information (for downward compatibility,
output in the legacy XML format if X and Y are 256)
Updated and commented Constants.RegionSize but didn't change the name for compatibility.
2013-09-28 07:33:56 -07:00
aea5d3a842
Remove time based terrain storage in SQLite so revision number can be used
...
to denote terrain format revision.
Add terrain DB format revision codes to ISimulationDataStore.cs.
Setup so legacy compatible terrain storage and fetch is possible while
allowing future format extensions.
2013-09-28 07:33:55 -07:00
fa1c688342
varregion: go back to using Constants.RegionSize so as not to break
...
external modules. People shouldn't use it but don't want to cause
too much breakage of legacy modules.
2013-09-28 07:33:54 -07:00
139639d25e
VarRegion: add RegionSize[XYZ] to RegionInfo.cs.
...
Update RegionInfo parameter and serialization routines to serialize
the region size if it is not the LegacyRegionSize.
2013-09-28 07:33:53 -07:00
317c04fe17
VarRegion: change RegionInfo storage of region coordinates from region
...
count number to integer world coordinates.
Added new methods RegionWorldLoc[XY].
Refactored name of 'RegionLoc*' to 'LegacyRegionLoc*' throughout OpenSim.
Kept old 'RegionLoc*' entrypoint to RegionInfo for downward compatability
of external region management packages.
2013-09-28 07:33:52 -07:00
8996ac1a9c
minor: Disable logging left active on regression test TestSameSimulatorIsolatedRegionsV2()
2013-09-27 22:33:42 +01:00
2cd95fac73
refactor: Rename Scene.AddNewClient() to AddNewAgent() to make it obvious in the code that this is symmetric with CloseAgent()
2013-09-27 22:27:39 +01:00
b16bc7b01c
refactor: rename Scene.IncomingCloseAgent() to CloseAgent() in order to make it clear that all non-clientstack callers should be using this rather than RemoveClient() in order to step through the ScenePresence state machine properly.
...
Adds IScene.CloseAgent() to replace RemoveClient()
2013-09-27 19:14:21 +01:00
b704de9bf8
minor code formatting for the sake of consistency and readability
2013-09-26 16:27:11 -07:00
d6d82dbd3c
minor: correct attachment spelling mistake in log message in HGEntityTransferModule.OnIncomingSceneObject()
2013-09-26 20:13:29 +01:00
e24edada24
minor: Comment out windlight log message about sending scene data for now.
2013-09-26 00:39:32 +01:00
253f8de8cd
minor: Add scene name to baked textures in cache log message
2013-09-26 00:33:50 +01:00
babfbe8d6d
minor: log MaxOutgoingTransferVersion at EntityTransferModule startup
2013-09-26 00:31:33 +01:00
4664090b34
minor: correct spelling of Initialized in LSC connector version message
2013-09-25 22:59:57 +01:00
b22c92368f
Move adding UUID.Zero -> Unknown User binding to UMM.Init() so that it's also called by HGUserManagementModule
2013-09-25 21:53:38 +01:00
32ddfc2740
Reinsert client.SceneAgent checks into LLUDPServer.HandleCompleteMovementIntoRegion() to fix race condition regression in commit 7dbc93c (Wed Sep 18 21:41:51 2013 +0100)
...
This check is necessary to close a race condition where the CompleteAgentMovement processing could proceed when the UseCircuitCode thread had added the client to the client manager but before the ScenePresence had registered to process the CompleteAgentMovement message.
This is most probably why the message appeared to get lost on a proportion of entity transfers.
A better long term solution may be to set the IClientAPI.SceneAgent property before the client is added to the manager.
2013-09-25 18:45:56 +01:00
732554be04
Reinsert 200ms sleep accidentally removed in commit 7dbc93c (Wed Sep 18 21:41:51 2013 +0100)
2013-09-25 18:29:14 +01:00
f384a6291e
Instead of swallowing any socket begin/end receive exceptions, log them for debugging purposes.
...
This may reveal why on some teleports with current code, the UseCircuitCode message gets through but CompleteMovement disappears into the ether.
2013-09-25 00:02:17 +01:00
7889e7757a
Don't use 'Indented' formatting for RpcXml responses.
...
(cherry picked from commit 93abcde69043b175071e0bb752538d9730433f1d)
2013-09-22 21:10:01 -05:00
2dc92e7de1
Preserve attachment point & position when attachment is rezzed in world
...
Patch taken from
http://opensimulator.org/mantis/view.php?id=4905
originally by Greg C.
Fixed to apply to r/23314 commit
ba9daf849e
2013-09-22 21:10:01 -05:00
a37c59b43e
minor: Recomment out log message uncommented in previous cbdfe969
2013-09-21 00:40:23 +01:00
cbdfe96905
When giving items between avatars in different simulators, only add the item to the receiving avatar's inventory once.
...
When a user gives an item, the user's client sends an InventoryOffered IM message to its simulator. This adds the item to the receiver's inventory. If the receiver isn't in the same simulator then XMLRPC is used to forward the IM to the correct simulator. The bug was that the receiving simulator handled the message by calling OnInstantMessage() again, which added a second copy of the item to the inventory. Instead, the receiving simulator should only notify the avatar that the item was offered.
2013-09-21 00:32:56 +01:00
4c0ec86176
minor: Add prefix to log message in LureModule
2013-09-21 00:14:57 +01:00
e2b3b7a2ae
minor: Correct minor spelling mistake Reseting -> Resetting in HG Map module log message
2013-09-20 23:42:55 +01:00
8502517d80
Make UUID.Zero resolve to "Unknown User" in user cache.
...
This is to avoid massive numbers of 'no user found' logs when user IDs are missing for some reason.
UUID.Zero should not be used for any user ID.
2013-09-20 23:07:24 +01:00
c01db5fbdd
Lock around read/write of ScenePresence.m_originRegionID to make sure that all threads are seeing the latest value and not a cached one.
...
There is a possibilty that some V2 teleport failures are due to the viewer triggered CompleteMovement thread not seeing the change of m_originRegionID by the UpdateAgent thread.
2013-09-20 22:41:53 +01:00
c6dea6ee78
Change some message log levels in Scene.IncomingUpdateChildAgent() for debugging purposes
2013-09-20 20:19:44 +01:00
35a6361b24
BulletSim: reduce avatar walking stopped threshold.
...
Add parameter for setting the walking stopped threshold.
This fixes the slight jump when an avatar stops walking.
2013-09-20 09:58:45 -07:00
07d7a5fd76
BulletSim: zero velocity when avatar not moving.
...
This fixes a movement jitter that happens when an avatar is standing on a
tilted surface.
2013-09-20 09:58:25 -07:00
c06a9ffe5c
Make new regions PG by default instead of Mature.
...
This makes scripted object sounds and a few other things play by default instead of having to switch the viewer to adult
This reduces the support burden
2013-09-20 00:04:33 +01:00
f1267730ef
UUID Gatherer: find assets used in Light Projection, Particle Systems, and Collision Sounds.
2013-09-19 23:01:06 +01:00
979b17165b
For debug purposes, allow simulators to force use of earlier SIMULATION/0.1 teleport protocol even if SIMULATION/0.2 is available.
...
This is specified in the MaxOutgoingTransferVersion attribute of [EntityTransfer] in OpenSim.ini, see OpenSimDefaults.ini for more details.
Default remains "SIMULATION/0.2"
Primarily for http://opensimulator.org/mantis/view.php?id=6755
2013-09-19 22:45:50 +01:00
b6f10780c2
minor: Make SP.MakeRootAgent() private - no external code has any business calling this method
2013-09-19 21:44:30 +01:00
03b2b5b77b
minor: Make log message at top of ScenePresence.CompleteMovement info level and comment out later log message in ScenePresence.MakeRootAgent()
...
Need an info message since this is currently important in detecting teleport issue when not at debug log level.
CompleteMovement message occurs before MakeRootAgent() one did
2013-09-19 20:59:27 +01:00
6bdef1f70b
minor: Stop debug logging whenever an npc is moved, other npc log related formatting cleanups
2013-09-19 20:49:55 +01:00
3a9a8d2113
Revert "Also check user authorization if looking to upgrade from a child to a root agent."
...
This reverts commit c7ded0618c
2013-09-19 20:26:26 +01:00
83c113896e
Create regression TestCrossOnSameSimulatorNoRootDestPerm() to check that avatars are not allowed to cross into a neighbour where they are not authorized, even if a child agent was allowed.
2013-09-19 20:26:08 +01:00
8999f06025
minor: correct method name in comment
2013-09-18 23:13:31 +01:00
ddcbd4bb7d
refactor: rename *ChildAgentDataUpdate() methods to *UpdateChildAgent()
...
verb-noun is consistent with other similar methods
2013-09-18 23:09:38 +01:00
3ce46adb2a
minor: Make log message when Scene.IncomingChildAgentDateUpdate() more explicit that there is a problem if it still finds the agent to be a child if the sender wanted to wait till it became root
...
Add some comments about the mssage sequence, though much more data is at
http://opensimulator.org/wiki/Teleports
2013-09-18 22:56:00 +01:00
f4d82a56f4
Double the time spent waiting for a UseCircuitCode packet in LLUDPServer.HandleCompleteMovementIntoRegion()
...
This is to deal with one aspect of http://opensimulator.org/mantis/view.php?id=6755
With the V2 teleport arrangements, viewers appear to send the single UseCircuitCode and CompleteAgentMovement packets immediately after each other
Possibly, on occasion a poor network might drop the initial UseCircuitCode packet and by the time it retries, the CompleteAgementMovement has timed out and the teleport fails.
There's no apparant harm in doubling the wait time (most times only one wait will be performed) so trying this.
2013-09-18 22:09:46 +01:00
7dbc93c62a
Change logging to provide more information on LLUDPServer.HandleCompleteMovementIntoRegion()
...
Add more information on which endpoint sent the packet when we have to wait and if we end up dropping the packet
Only check if the client is active - other checks are redundant since they can only failed if IsActve = false
2013-09-18 21:41:51 +01:00
1d2466889a
Reinstate insertion of "Unknown UserUMMAU4" now, as naive removing may be generating too many repeating user requests from other sources.
...
Leaves in the dropping of the client GUN8 (now 9) uuid binding message, since this was the much more common case from the viewer-side and this can only affect viewers.
2013-09-17 01:20:55 +01:00
845d2b193a
Comment out warning about no grid user found in UMM.TryGetUserNamesFromServices() for now
2013-09-17 00:54:53 +01:00
69ec85f491
Fix issue in recent 3f0fa9f7 where the code start adding unknown user cache entries with no name
2013-09-17 00:02:36 +01:00
2603a2891b
Reinsert comments about possible race conditions when sending bulk inventory updates on non-flag clothing editing
2013-09-16 23:26:13 +01:00
f99dae03cb
Fix bug where using PRIM_LINK_TARGET with only two remaining list items (e.g. link number then PRIM_ROTATION) would not return the parameter
...
Extended regression test for this case
2013-09-16 23:00:40 +01:00
60cf42cb8d
Make llGetLinkPrimitiveParams() abort and return existing list of params when it encounters an invalid link number, rather than throwing an exception
...
Addresses http://opensimulator.org/mantis/view.php?id=6768
Thanks to talun for the patch on that commit - in the end I took a different approach that also deals with invalid PRIM_LINK_TARGET
However, not yet generating the same warning on invalid PRIM_LINK_TARGET as seen on LL grid
This commit also adds regression tests for some cases of llGetLinkPrimitiveParams()
2013-09-16 22:56:08 +01:00
3f0fa9f707
To avoid viewers (particularly on the Hypergrid) from permanently caching a UUID -> "Unknown User" binding, drop the binding request rather than replying with "Unknown User"
...
By not binding UUID -> "Unknown User", we leave open the possibility that the binding may be correctly resolved at a later time, which can still happen in some Hypergrid situations.
Observed behaviour of LL viewer 3.3.4 is that a dropped bind request is not retried until the next session.
2013-09-16 19:45:42 +01:00
07d6a0385f
6762: llList2Key fails to convert a string in a list to a key
...
llGetPrimitiveParams changed to return the sculpty key as an LSL_String so
that type checking in llList2Key will work
2013-09-12 23:23:52 +01:00
3c85afbb43
Allow setting the EntityTransfer-max_distance to 0 to override distance checks. This is to facilitate current viewer work fixing the distance limitations for teleporting.
2013-09-12 11:46:12 -04:00
dacc20ee48
BulletSim: remove collision cache clearing logic for physical objects.
...
This fixes constraints from getting messed up when properties change.
2013-09-11 16:50:27 -07:00
b29e9d37e7
Change handling of the FetchInventoryDescendents2 capability configuration to allow
...
for external handlers.
2013-09-11 12:15:16 -07:00
6e39cc316f
BulletSim: add ClearCollisionProxyCache function to API.
...
Add proxy cache clearing when some properties are changed. This fixes
a problem where objects would stop colliding of they were moved
with setPosition mulitple times.
2013-09-11 09:12:24 -07:00
c5eabb28b4
BulletSim: add LSL function and plumbing for setting a spring
...
equilibrium point in the physics engine constraint.
2013-09-11 09:12:19 -07:00
5827b6e1aa
BulletSim: add extended physics LSL constants for axis specification.
...
Add specific error warnings for mis-matched parameter types in extended
physics functions.
2013-09-11 09:12:18 -07:00
cf2cdc191d
BulletSim: ability to specify groups of axis to modify in constraint parameters that control multiple axis. Add useLinearReferenceFrameA constraint parameter.
2013-09-11 09:12:16 -07:00
7c54630a2d
BulletSim: add axis parameter for specifying enable, damping, and stiffness for spring constraints. Renumber parameter ops since I can as no one is using them yet.
2013-09-11 09:12:14 -07:00
30b3657a66
BulletSim: implementation of setting spring specific physical parameters. Add setting of linkset type to physChangeLinkParams. Lots of detail logging for setting of linkset constraint parameters.
2013-09-11 09:12:12 -07:00
67195618d5
BulletSim: add requestor's ID to post taint detail log message.
2013-09-11 09:12:10 -07:00
3dbf4a1002
BulletSim: remove chatty debug message from previous commit.
2013-09-11 09:12:09 -07:00
e0b457d3c3
BulletSim: add position and rotation update for child prim physics update events. Normally, physics engines do not return updates for child prims so, under normal operation, this code should never execute. Will only be used when using flexible linkset linkages.
2013-09-11 09:12:07 -07:00
d09c35f506
BulletSim: pass both root and child BSPhysObjects to Extension function. Update routines to use the new parameters list from above change.
2013-09-11 09:12:05 -07:00
995314f91f
BulletSim: add ID parameter to TaintedObject calls so logging will include LocalID of object which created the taint.
2013-09-11 09:12:03 -07:00
4781297b4e
BulletSim: Extension parameters passed through the classes made to pass just and array of objects rather than a mixture of parameters and array. Makes understanding and parsing what is being passed much easier.
2013-09-11 09:12:02 -07:00
6d83f3f021
BulletSim: adjust avatar capsule height calculation to be closer to defined SL heights. Correct BSParam avatar height defaults to be what's in OpenSimDefaults.ini.
2013-09-11 09:12:00 -07:00
e1120cb74d
BulletSim: add extended physics function physGetLinkType(linkNum). Add implementation of physChangeLinkParams() in BSLinksetConstraint.
2013-09-11 09:11:58 -07:00
f6fdfd16f5
BulletSim: change ExtendedPhysics constants to 'const' so they can be used as case variables in switch statements.
2013-09-11 09:11:54 -07:00
455d36c4c7
BulletSim: add physChangeLinkParams to set individual parameters on link constraints. Not fully functional. Remove double definition of ExtendedPhysics parameters by having BulletSim reference the optional module (addition to prebuild.xml and usings).
2013-09-11 09:11:52 -07:00
b2a1348adc
BulletSim: update C++ HACD parameters to values that handle enclosed hollow spaces better. This shouldn't affect many since this HACD routine is off by default.
2013-09-11 09:11:50 -07:00
6aee08ac3c
BulletSim: add physChangeLinkSpring to change linkset link to be a spring constraint. Add implementation to create spring constraint. Send up property updates for linkset children at the end of flexible linkset links. The simulator probably doesn't do the right thing yet.
2013-09-11 09:11:48 -07:00
dff0fb5690
BulletSim: Linkset.Refresh() calls internal ScheduleRebuild() to recreate the linkset physics at next PostTaint time. Replace the existing calls to ScheduleRebuild to be calls to Refresh(). This allows external routines to make changes to parameters and then cause the linkset to rebuild.
2013-09-11 09:11:46 -07:00
f3cc20050e
BulletSim: initial implementation of physChangeLinkFixed that resets a linkset's link back to a fixed, non-moving connection.
2013-09-11 09:11:45 -07:00
c6a6631efc
BulletSim: move linkset extension operations into BSPrimLinkable where they should be.
2013-09-11 09:11:43 -07:00
993bcec088
BulletSim: add unmanaged and XNA functions for hinge, slider and spring constraints.
2013-09-11 09:11:41 -07:00
0971c7ae77
BulletSim: complete linkage of spring constraint into linkset constraint.
2013-09-11 09:11:39 -07:00
9a7d0e489c
BulletSim: add spring constraint to linkset constraint types.
2013-09-11 09:11:37 -07:00
48ee73bfa7
BulletSim: add API and calls for spring constraint parameters.
2013-09-11 09:11:36 -07:00
725751fd6c
BulletSim: fixes for change linkset implementation of physical linksets.
2013-09-11 09:11:34 -07:00
b05cb3b2bf
Change collision logic in SceneObjectPart so land_collision will happen.
...
The previous logic would generate land_collision_start and land_collision_end
but would not generate the land_collision itself.
2013-09-09 14:50:33 -07:00
a97f6f8668
Fix configuration/ini expansion issue. Thanks to smxy for testing.
2013-09-07 13:11:31 -04:00
04619a9b13
Restore group membership check for HG users in QueryAccess.
2013-09-05 07:44:27 -07:00
dc74a50225
Stop "show client stats" from throwing an exception if somehow Scene.m_clientManager still retains a reference to a dead client.
...
Instead, "show client stats" now prints "Off!" so that exception is not thrown and we know which entries in ClientManager are in this state.
There's a race condition which could trigger this, but the window is extremely short and exceptions would not be thrown consistently (which is the behaviour observed).
It should otherwise be impossible for this condition to occur, so there may be a weakness in client manager IClientAPI removal.
2013-09-04 23:48:24 +01:00
c7ded0618c
Also check user authorization if looking to upgrade from a child to a root agent.
...
Relevant if a child agent has been allowed into the region which should not be upgraded to a root agent.
2013-09-04 00:44:17 +01:00
5f0d54c209
For a Hypergrid user, delay estate access checks until NewUserConnection() so that they work.
...
This is necessary because the hypergrid groups checks (as referenced by estates) require an agent circuit to be present to construct the hypergrid ID.
However, this is not around until Scene.NewUserConnection(), as called by CreateAgent() in EntityTransferModule.
Therefore, if we're dealing with a hypergrid user, delay the check until NewUserConnection()/CreateAgent()
The entity transfer impact should be minimal since CreateAgent() is the next significant call after NewUserConnection()
However, to preserve the accuracy of query access we will only relax the check for HG users.
2013-09-04 00:42:23 +01:00
b781a23c44
In pCampbot PhysicsBehaviour.Close(), only cancel jumping if bot is connected
2013-09-03 19:58:27 +01:00
9c3c9b7f5f
Make pCampbot "add behaviour" and "remove behaviour" console commands work for all bots if no bot number is given
2013-09-03 19:57:34 +01:00
76bd2e2d72
Consistently give responsibility for thread sleeping to behaviours rather than controlling from the main action loop
...
This is to avoid excessive and inconsistent delays between behaviours that currently need to embed sleeps in other actions (e.g. physics) and other behaviours.
Might need a more sophisticated approach in the long term.
2013-09-03 19:41:12 +01:00
3dbe7313d1
Add Close() method to IBehaviour to allow behaviours to cleanup when removed or bot it disconnected.
...
In this case, it is used to turn off jump when physics testing behaviour is removed.
2013-09-03 19:33:17 +01:00
1a2627031d
Add pCampbot "remove behaviour" console command for removing bot behaviours during operation.
...
Doesn't currently work very well as stopping physics, for instance, can leave bot travelling in old direction
2013-09-03 19:05:54 +01:00
9bd6271570
Add ability to adjust pCampbot bot behaviours whilst running with "add behaviour <behaviour-name> <bot-number>" console commad
2013-09-03 18:51:55 +01:00
01cb8033a4
And fix break in "show bot" from commit 9c65207
2013-09-03 17:55:20 +01:00
a89c56dcf1
Fix build break from last commit 9c65207. Mono 2.4 lacks string.join(string, List<string>), or some auto casting is missing
2013-09-03 17:53:29 +01:00
9c65207936
Show behaviours of pCampbot bots in "show bots" and "show bot" console commands
2013-09-03 17:07:57 +01:00
431156f6c4
minor simplification of some unix date functions in Util. No functional change.
2013-09-03 00:17:50 +01:00
5f15ee95dc
Fix logic errors in "show grid users online" console command which didn't actually filter out users shown continuously online for more than 5 days
...
Remove confusion in command output.
2013-09-03 00:16:43 +01:00
fc9f50d940
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2013-09-03 00:06:50 +01:00
4035badd20
Add experimental "show grid users online" console command to show grid users online from a standalone/robust instance.
...
This is not guaranteed to be accurate since users may be left "online" in certain situations.
For example, if a simulator crashes and they never login/logout again.
To counter this somewhat, only users continuously online for less than 5 days are shown.
2013-09-03 00:04:12 +01:00
Oren Hurvitz