* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
* Finally got to the point where I could pull up the CustomiseResponse function. Major de-duplication.
* Introduced FromRegionInfo on RegionProfileData
* This revision needs both grid and standalone testing galore.
Work in progress!
* A saved archive now immediately expires the data in the asset cache that it used, rather than retaining all the assets (esp textures) in the cache.
* This is an imperfect solution. Ideally we would only expire the assets newly requested for the archive (not existing ones). But doing that would require a lot more
restructuring.
* I don't believe there are any locking issues due to the locking performed by the underlying memory cache, but please report any issues.
There were multiple tests in one test method (T011_Auth_Login). This
test has been refactored into multiple tests. Common setup code was
placed into a SetUp method executed before each test.
Recent changes in the code handling login_to_simulator XMLRPC method
calls caused two tests to fail because not enough parameters were being
supplied with the method call. The parameters added in this patch work,
but I'm not sure whether they are actually correct or even relevant.
Diva, please look over this.
Changed OpenSim.Framework.Communications.Tests.LoginServiceTests to use the LLStandaloneLoginService (from the LLStandaloneLoginModule) rather than LocalLoginService. Really these login tests should most likely be somewhere else as they are testing specific implementations of login services.
Commented out the old LocalLoginService as its no longer used, but want to check there are no problems before it gets deleted.
Added a flag (bool m_autoCreateLindenStack = true) which says if the ClientStack will be autocreated and initialised when creating regions. This helps with moving ClientStacks to Region modules.
Currently this flag is hardcoded to true, as it is only for testing at the moment, so you need to change the value in the code if you want to turn off auto creating.
Also in that plugin it registers the IUserService with all the Scenes (as they are created). So now we can start changing over all uses of IUserService, that currently access it from the CommunicationsManager to accessing it from the Scene.RequestModuleInterface call.
Once that is done we can move the UserService creation out to its own plugin and remove all references to it from the CommunicationsManager. Then we can take the next CommunicationsManager interface and repeat.
Added a ApplicationRegistry to OpenSimBase.
Changed LoadRegionsPlugin so it registers itself to that application registry.
Added a event to LoadRegionsPlugin, that is triggered when it creates a new scene ,although maybe this event should actually be in opensimBase incase other plugins are creating regions (like the RemoteAdminPlugin).
- handle GetUser request for nonexistent user gracefully
- include throttle levels in ClientInfo
- code to save/restore throttles in client stack
- only update/send updates to active clients
- make animation classes serializable
* Moves Entity Updates into a seperate thread, allowing for OpenSim to utilize a computers CPU more effectively in return for potentially greater user and prim capacity.
* Removes an expensive Sqrt call performed during Update on each object. This should lower CPU requirements for high-prim regions with physics enabled.
* MXP Changes: Centers the region around 0,0 for primitives instead of 128,128. Prim display should now look more correct for MXP viewers.
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
* Added estate ban table to migration scripts of all supported databases.
* Added nhibernate mapping for EstateBans property of EstateSettings
* Refactored property accessors for EstateBan object.
* Added comments for EstateBan properties.
* Ensured that NHibernate tests pass with NUnitGUI.
* Ensured that nant test target passes.
This fixes mantis #3210. Thank you, tlaukkan!
* Not locking causes enumeration exceptions as described in this matis
* part.TaskInventory needs to be locked for every access as it's a dictionary
* Extra locking will hopefully not cause any major issues - in places where the enumeration of the dictionary performs other lock or long running operations, the dictionary is
cloned instead
I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
Known issue: after TP, the self client doesn't see the animations going, but others can see them. So there's a bug there (TPs only, crossings seem to be all fine).
Untested: did not test animation overriders; only tested playing animations from the viewer.
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
interface. Shared modules will now only get added once, so the command
handler is called once per module, not once per scene. Removal of scenes
has no adverse effects. Nonshared modules will be called for each scene.
These changes replace all direct references to the AssetCache with
IAssetCache. There is no change to functionality. Everything works as
before.
This is laying the groundwork for making it possible to register
alternative asset caching mechanisms without disrupting other parts of
OpenSim or their dependencies upon AssetCache functionality.
line editing, context sensitive help (press ? at any time), command line
history, a new plugin command system and new appender features thet let you
type while the console is scrolling. Seamlessly integrates the ICommander
interfaces.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
* Typing help will now give a list of these topics at the top (as well as the rest of the current help stuff)
* Typing help <topic> will give information about commands specific to that topic
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
sceneB
* However, I'm not convinced that the actual process in the test completely reflects reality, and a lot of stuff had to be rigged up (which should get resolved over time)
I'll be writing some instructions on its use as part of a more general article on various methods of creating better initial avatars for new users. Which will include some code samples, but as each grid has its own requirements, there will be no out of the box solution included.
* Adds a prototype web stats module which is disabled by default. It's functional with one report right now, however, the database structure may change, so I don't recommend enabling this to keep actual stats right now. I'll let you know when it's safe.
* Adds Prototype for ajaxy web content
* removed a warning or two.
- Introducing synchronous Teleports. Now the receiving region calls back the sending region after the client has been made a root agent there, that is, after client sends CompleteMovement to the destination.
- SendCloseAgent moved from OGS1 Remoting to RESTComms.
* This means that you can now save terrain textures, water height, etc.
* Estate settings are not supported
* Older OAR files without these settings can still be loaded
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
* http://www.codeplex.com/webserver/WorkItem/View.aspx?WorkItemId=3110 fix erronious call to beginread that caused an exception which was caught and ignored (increase performance)
* Pass socket into httpclientcontectImp and call the disconnect + reuse method so the socket can be reused quicker (increase performance)
* Ensured that in every error scenario beginAccept is called (stability)
* Fixed header casing (standards compliance)
* Fixed Connection: close handling (standards compliance)
* This facility allows you to save changes to an object that you've rezzed into a region back into their original inventory item without having to take a copy of the rezzed
object.
aggressive at nixing the user out of the cache. We're now relying on NeedSceneCacheClear to decide
whether to nix it or not. All other mods in other files are for better debugging messages.
some of our DNS/dotted decimal issues that plague teleporting.
We are increasing the MajorInterfaceVersion from 1 to 2 in the
gridserver, so sims will need to be updated on various grids.
* This means that UserProfileCacheService no longer needs to know about IClientAPI and can leave it to callers to do their own error logging
* This is also more consistent with the way that item inventory manipulation is handled
* I don't really think Scene.PacketHandlers.cs should be a permanent home for these handlers - this is just for convenience
* This means that LL RAW terrains (one source being the upload/download buttons on the estate dialog in the viewer) are now imported the 'right' way around rather than being
flipped on the y axis
* Existing RAW terrains before this patch will need to be flipped with the "terrain flip y" command from the console after import
* More details on the mailing lists soon.
-This line, and those below, will be ignored--
M OpenSim/Region/Environment/Modules/World/Terrain/FileLoaders/LLRAW.cs
M OpenSim/Framework/Communications/Cache/CachedUserInfo.cs
M OpenSim/Framework/Communications/Cache/UserProfileCacheService.cs
* Disabled by default (see OpenSim.ini.example for how to enable)
* Saves exceptions to a folder on disk (default "crashes") when enabled.
* These reports can then be uploaded or posted to help debug an error.
* However, this is not currently activated since it's not absolutely fully tested and there's a bug lurking in there to do with the sending of the BulkInventoryUpdate packets
prevent adjacent sims from using identical Local IDs for the attachment
Thanks to Mana Janus (Hippo Viewer) for providing the crucial bit of
information, namely that, due to a bug in the viewer, adjacent sims can't
use the same local ids.
Adds a new method to IClientAPI to allow adding message handlers
for GenericMessages (of which "autopilot" is one). Part 2 adds a
specific autopilot handler in ScenePresence.cs.
2) Removing unused variables and functions.
3) Simplifying the navigation logic in ScenePresence.cs. The
original patch was somewhat complex because it included orientation
logic for a future enhancement of orienting the avatar to point
towards the direction being walked. Currently this isn't working,
though, so I removed the orientation code, which leaves just the
smaller and hopefully simpler-to-understand movement code.
mechanism to prevent prim loss. Preserve link order on sim restart
and drag copy. Fix drag-copied prims' inventories. Fix persistence
of child prim inventories.
* This is Diva's hypergrid patch, as perviously discussed on the opensim-dev mailing list
* Applied some minor prebuild.xml jiggling to resolve a dependency issue
* Thanks Diva!
from the presence module to the message server, through the user server
and on into the database. This should fix the "Already logged in" issue
that grids see after a sim crashes, or a user crashes out of a sim.
Not yet a 100% solution for friends, but getting there.
This patch adds the option of adding the email when you create
a new user. This works in Gridmode as none Gridmode. This
option is also added to RemoteAdminPlugin. With a new handler
you can create a user with a email.
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
the IM module and makes it into a module of it's own, which can be used by
all other modules. Removes some ugly hacks. Refer to the IM module to see
how it's used. Also fixes the persistence issue (Mantis #2598)
Contains a migration. May contain nuts.
Please back up your inventory data store. This revision changes the interface
version!! No older regions can connect to these new UGAIM, and the new regions
can't connect to the old UGAIM. Fixes a long-standing issue of permissions loss
Currently persisted on MySQL only.
physical center of an avatar, for display purposes. This should keep the
avatar feet above ground visually in most cases. Tweaked for both height
extremes and various leg lengths. Improvements welcome
* Code Cleanliness Fixes in LLClientView
* Using field instead of local variable for handlerUpdatePrimGroupRotation (if you notice any new oddities with prim group rotation after this patch, please mantis)
* This is done by sending a 'major interface version' number on sim registration. Developers must increment this every time they make a change that would make the previous
OpenSim revision failure incompatible with the new one (non-fatal incompatibilities are fine).
* This number resides in OpenSim.Framework.Servers.VersionInfo.MajorInterfaceVersion
* This allows the grid service to stop older, incompatible regions from connecting
* Implements the SendInitiateDownload method in IClientAPI
* Uses the ITerrainModule Interface to write a terrain file to disk then uses a FileStream to read the binary file from the disk and put it in a byte array. and save to the xFer list.
* It then tells the client to download the file and the client initiates an Xfer request.
* Items will now be locally cached for only 24 hours from last access. (Rather than until restart)
* Caveat: Implementing the new caching mechanism means statistics gathering on AssetCache is no longer functional. (Justin - you might want to take a look and see if you can somehow get that back and running if you still need it)
* This patch is highly experimental and may cause clients to not be able to connect, if this is the case, it will be rolled back in approximately 5 minutes.
* Introducing IClientCore - this will be the key replacement for IClientAPI in the long run, it has a very minimal set of methods designed to allow you to access specialist API's.
* See https://lists.berlios.de/pipermail/opensim-dev/2008-September/003049.html for the early discussion on this.
This patch introduces a couple of read-only properties,
so that I can grab the asset server plugin from a region
module. This is needed to set up an http service for
accessing standalone assets remotely.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* This is to make things less confusing to users (and maybe a little easier to do future version filtering for grid connections)
* If there's disagreement about this, then please say so (preferably in the opensim-dev mailing list)
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
* And hopefully rebaking all the time should no longer be necessary now
* It turns out that when the client baked the texture, the uploaded asset had the Temporary flag to true (Temporary is actually deprecated).
* It also had the StoreLocal flag set to true, which signifies that the asset should be stored locally. If it disappears we should reply to the asset request with
ImageNotInDatabasePacket
* However, last time this was enabled some clients started crashing. This may well no longer be the case and needs to be tested, but in the mean time we will store
the asset instead.
* This needs to be resolved in a better way, possibly by starting to send the ImageNotInDatabase packet again instead
* This moves authentication from the client thread (where failure was difficult to detect) to the particular thread handling that packet
* I've kept the authentication outside of the crucial clientCircuits lock (though any delay here is probably swamped by the other delays associated with login)
* Also added more to the unit test to ensure this doesn't regress
KeepAlive for certain XmlRpc handlers.
Making use of new AddXmlRpcHandler method in RemoteAdminPlugin to
avoid clients waiting indefinitely for response.
taking note of BaseHttpServer parameter in CommunicationsManager
constructor (was passed it but then just ignored so far).
Mike Mazur