I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
Known issue: after TP, the self client doesn't see the animations going, but others can see them. So there's a bug there (TPs only, crossings seem to be all fine).
Untested: did not test animation overriders; only tested playing animations from the viewer.
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
interface. Shared modules will now only get added once, so the command
handler is called once per module, not once per scene. Removal of scenes
has no adverse effects. Nonshared modules will be called for each scene.
These changes replace all direct references to the AssetCache with
IAssetCache. There is no change to functionality. Everything works as
before.
This is laying the groundwork for making it possible to register
alternative asset caching mechanisms without disrupting other parts of
OpenSim or their dependencies upon AssetCache functionality.
line editing, context sensitive help (press ? at any time), command line
history, a new plugin command system and new appender features thet let you
type while the console is scrolling. Seamlessly integrates the ICommander
interfaces.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
* Typing help will now give a list of these topics at the top (as well as the rest of the current help stuff)
* Typing help <topic> will give information about commands specific to that topic
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
sceneB
* However, I'm not convinced that the actual process in the test completely reflects reality, and a lot of stuff had to be rigged up (which should get resolved over time)
I'll be writing some instructions on its use as part of a more general article on various methods of creating better initial avatars for new users. Which will include some code samples, but as each grid has its own requirements, there will be no out of the box solution included.
* Adds a prototype web stats module which is disabled by default. It's functional with one report right now, however, the database structure may change, so I don't recommend enabling this to keep actual stats right now. I'll let you know when it's safe.
* Adds Prototype for ajaxy web content
* removed a warning or two.
- Introducing synchronous Teleports. Now the receiving region calls back the sending region after the client has been made a root agent there, that is, after client sends CompleteMovement to the destination.
- SendCloseAgent moved from OGS1 Remoting to RESTComms.
* This means that you can now save terrain textures, water height, etc.
* Estate settings are not supported
* Older OAR files without these settings can still be loaded
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
* http://www.codeplex.com/webserver/WorkItem/View.aspx?WorkItemId=3110 fix erronious call to beginread that caused an exception which was caught and ignored (increase performance)
* Pass socket into httpclientcontectImp and call the disconnect + reuse method so the socket can be reused quicker (increase performance)
* Ensured that in every error scenario beginAccept is called (stability)
* Fixed header casing (standards compliance)
* Fixed Connection: close handling (standards compliance)
* This facility allows you to save changes to an object that you've rezzed into a region back into their original inventory item without having to take a copy of the rezzed
object.
aggressive at nixing the user out of the cache. We're now relying on NeedSceneCacheClear to decide
whether to nix it or not. All other mods in other files are for better debugging messages.
some of our DNS/dotted decimal issues that plague teleporting.
We are increasing the MajorInterfaceVersion from 1 to 2 in the
gridserver, so sims will need to be updated on various grids.
* This means that UserProfileCacheService no longer needs to know about IClientAPI and can leave it to callers to do their own error logging
* This is also more consistent with the way that item inventory manipulation is handled
* I don't really think Scene.PacketHandlers.cs should be a permanent home for these handlers - this is just for convenience
* This means that LL RAW terrains (one source being the upload/download buttons on the estate dialog in the viewer) are now imported the 'right' way around rather than being
flipped on the y axis
* Existing RAW terrains before this patch will need to be flipped with the "terrain flip y" command from the console after import
* More details on the mailing lists soon.
-This line, and those below, will be ignored--
M OpenSim/Region/Environment/Modules/World/Terrain/FileLoaders/LLRAW.cs
M OpenSim/Framework/Communications/Cache/CachedUserInfo.cs
M OpenSim/Framework/Communications/Cache/UserProfileCacheService.cs
* Disabled by default (see OpenSim.ini.example for how to enable)
* Saves exceptions to a folder on disk (default "crashes") when enabled.
* These reports can then be uploaded or posted to help debug an error.
* However, this is not currently activated since it's not absolutely fully tested and there's a bug lurking in there to do with the sending of the BulkInventoryUpdate packets
prevent adjacent sims from using identical Local IDs for the attachment
Thanks to Mana Janus (Hippo Viewer) for providing the crucial bit of
information, namely that, due to a bug in the viewer, adjacent sims can't
use the same local ids.
Adds a new method to IClientAPI to allow adding message handlers
for GenericMessages (of which "autopilot" is one). Part 2 adds a
specific autopilot handler in ScenePresence.cs.
2) Removing unused variables and functions.
3) Simplifying the navigation logic in ScenePresence.cs. The
original patch was somewhat complex because it included orientation
logic for a future enhancement of orienting the avatar to point
towards the direction being walked. Currently this isn't working,
though, so I removed the orientation code, which leaves just the
smaller and hopefully simpler-to-understand movement code.
mechanism to prevent prim loss. Preserve link order on sim restart
and drag copy. Fix drag-copied prims' inventories. Fix persistence
of child prim inventories.
* This is Diva's hypergrid patch, as perviously discussed on the opensim-dev mailing list
* Applied some minor prebuild.xml jiggling to resolve a dependency issue
* Thanks Diva!
from the presence module to the message server, through the user server
and on into the database. This should fix the "Already logged in" issue
that grids see after a sim crashes, or a user crashes out of a sim.
Not yet a 100% solution for friends, but getting there.
This patch adds the option of adding the email when you create
a new user. This works in Gridmode as none Gridmode. This
option is also added to RemoteAdminPlugin. With a new handler
you can create a user with a email.
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
the IM module and makes it into a module of it's own, which can be used by
all other modules. Removes some ugly hacks. Refer to the IM module to see
how it's used. Also fixes the persistence issue (Mantis #2598)
Contains a migration. May contain nuts.
Please back up your inventory data store. This revision changes the interface
version!! No older regions can connect to these new UGAIM, and the new regions
can't connect to the old UGAIM. Fixes a long-standing issue of permissions loss
Currently persisted on MySQL only.
physical center of an avatar, for display purposes. This should keep the
avatar feet above ground visually in most cases. Tweaked for both height
extremes and various leg lengths. Improvements welcome
* Code Cleanliness Fixes in LLClientView
* Using field instead of local variable for handlerUpdatePrimGroupRotation (if you notice any new oddities with prim group rotation after this patch, please mantis)
* This is done by sending a 'major interface version' number on sim registration. Developers must increment this every time they make a change that would make the previous
OpenSim revision failure incompatible with the new one (non-fatal incompatibilities are fine).
* This number resides in OpenSim.Framework.Servers.VersionInfo.MajorInterfaceVersion
* This allows the grid service to stop older, incompatible regions from connecting
* Implements the SendInitiateDownload method in IClientAPI
* Uses the ITerrainModule Interface to write a terrain file to disk then uses a FileStream to read the binary file from the disk and put it in a byte array. and save to the xFer list.
* It then tells the client to download the file and the client initiates an Xfer request.
* Items will now be locally cached for only 24 hours from last access. (Rather than until restart)
* Caveat: Implementing the new caching mechanism means statistics gathering on AssetCache is no longer functional. (Justin - you might want to take a look and see if you can somehow get that back and running if you still need it)
* This patch is highly experimental and may cause clients to not be able to connect, if this is the case, it will be rolled back in approximately 5 minutes.
* Introducing IClientCore - this will be the key replacement for IClientAPI in the long run, it has a very minimal set of methods designed to allow you to access specialist API's.
* See https://lists.berlios.de/pipermail/opensim-dev/2008-September/003049.html for the early discussion on this.
This patch introduces a couple of read-only properties,
so that I can grab the asset server plugin from a region
module. This is needed to set up an http service for
accessing standalone assets remotely.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* This is to make things less confusing to users (and maybe a little easier to do future version filtering for grid connections)
* If there's disagreement about this, then please say so (preferably in the opensim-dev mailing list)
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
* And hopefully rebaking all the time should no longer be necessary now
* It turns out that when the client baked the texture, the uploaded asset had the Temporary flag to true (Temporary is actually deprecated).
* It also had the StoreLocal flag set to true, which signifies that the asset should be stored locally. If it disappears we should reply to the asset request with
ImageNotInDatabasePacket
* However, last time this was enabled some clients started crashing. This may well no longer be the case and needs to be tested, but in the mean time we will store
the asset instead.
* This needs to be resolved in a better way, possibly by starting to send the ImageNotInDatabase packet again instead
* This moves authentication from the client thread (where failure was difficult to detect) to the particular thread handling that packet
* I've kept the authentication outside of the crucial clientCircuits lock (though any delay here is probably swamped by the other delays associated with login)
* Also added more to the unit test to ensure this doesn't regress
KeepAlive for certain XmlRpc handlers.
Making use of new AddXmlRpcHandler method in RemoteAdminPlugin to
avoid clients waiting indefinitely for response.
taking note of BaseHttpServer parameter in CommunicationsManager
constructor (was passed it but then just ignored so far).
* Unix epoch starts at midnight, not at 8:00am
* All date/time handling should be done in UTC in the server, not in
the local timezone.
* Refactor out repeated computation of a constant value
- Added setting of CreationTime to some places where inventoryitems
are created
This fixes Mantis#2390.
Add rezzing time to objects. Add Object return and traffic fields to land
database. Add plumbing for auto return. Implement auto return.
Contains a migration. May contain nuts.
* This allows multiple user profile providers to be specified in OpenSim.ini separated by commas
* If multiple providers are specified then a request for a user profile will query each in turn until the profile is either found or all have been queried
* Unfortunately I don't believe this order can currently be specified, which if true is something that will need to be fixed.
* Thanks to smeans for the original patch.
- Added two missing caps (UpdateScriptAgent, UpdateScriptTask)
- Added one missing EventQueue event (ScriptRunningReply)
- Changed DNE and XEngine to use this new event
As we only use the mono engine anyway, the "Mono" checkbox is set by
default but doesn't have any function.
* I believe this is reasonable since code outside the Linden client stack shouldn't be aware of the packet format being used
* I would love to have made the method protected, but the LoadBalancerPlugin is still calling it and resolving that would require more work
* Region registration is enabled by default in the configuration unless the user chooses otherwise
* On the console
* show status - shows grid status
* enable-reg - enables region registration to the grid
* disable-reg - disables region registration
* Enabling or disabling region registration will not affect any other grid functions or regions already on the grid
* Experimenting with the PacketPool mechanism.
* It's still disabled in the code, however there's now a flag to enable it.
* Converted to use Generic Collections vs Hashtables, also now uses a list of 'OK to pool' packets, starting with the high volume PacketAck packet.
fields is GONE (HttpServer does not support that), you can read the
"normal" HTTP headers available via properties, and you can add
headers. also, it is now possible to set a timeout for KeepAlive (for
those clients that pay attention to it).
this also fixes the broken REST inventory/assets/appearance services,
they should be working again.
testcase for OSHttpResponse will follow.
* I believe this was the cause of the remaining packet_out_of_order messages in the Linden client logs
* There were race conditions where multiple clientstacks would overwrite each other's sequence numbers
Implementation of llModifyLand() and There is a bug on
permission-check of land-terraforming: x an y-coordinates
are interchanged on function-call ExternalChecksCanTerraformLand.
Correct: x is west, and y is north. 2) Missing check of
"Other allow to terraform-flag" (Parcel.ParcelFlags.AllowTerraform)
- Added lookup in the data-layer
- MySQL works
- SQLite doesn't have a grid-db, so it won't work there
- I added MSSQL-code to the best of my knowledge; but I don't know MSSQL :-)
- Added the plumbing up to OGS1GridServices. This speaks with the grid-server
via XMLRPC.
- Modified MapSearchModule to use the new data. It's backward compatible; if
used with an old grid-server, it just returns one found region instead of a
list.
- Refactored a bit.
Note: This updates data, grid-server and region code. No new files.
old way: each region module interested in chat from client had to
- subscribe to scene.EventManager.OnNewClient
- then in its OnNewClient delegate it would subscribe to
client.OnChatFromViewer to capture chat messages coming
new way: ChatModule is the only region module that uses the "old
way" approach but is now forwarding all client chat via
scene.EventManager.OnChatFromClient
- each region module interested in chat from client now only
subscribes to scene.EventManager.OnChatFromClient
this not only simplifies code, but also allows us to substitute
ChatModule with derived classes (ConciergeModule is going to be one
example).
Also, this changeset changes ChatFromViewer to ChatFromClient as it
doesn't necessarily have to be a viewer that is a chat source.
i've taken great care to only comment out those OnNewClient delegates
that were only used for getting at the client chat --- hope it's not
breaking anything.
* Switched it on by default
* Updated OpenSim.ini.example to reflect this
* Caught a UDP Server issue that occurs when the network pipe is saturated
* Still experimental :D
required to log in. set_login_params accepts avatar_uuid and password of a
user with god level 200 or more, and allows setting either or both the
login_motd or login_level
* This is a HUGE update.. and should be considered fraut with peril.
* SSL Mode isn't available *yet* but I'll work on that next.
* DrScofld is still working on a radical new thread pump scheme for this which will be implemented soon.
* This could break the Build! This could break your Grid!
* This is an initial basic experimental code for inventory import and export from the region server
* Probably not yet ready for general use
* Thanks Kayne!
Estate/ Manager Owner Uses the Region/Estate Menu Region TAB,
and uses "Teleport Home All Users..." (Action Button), the
action will complete but no one will be teleported and all
users still function in the region ok.
* returns FAKEEVENT instead of the connection returning a 502. It doesn't like our 502's for some reason.. so, in leau of this.. send it a fake event.
* Once again, this is still 'really early' code, so please don't blame us if you have no more threads left.
* This won't function yet as far as the client can tell.. because it doesn't respond to the first query with a 200 message.
* We have to figure out how to encode those binary values in the example code in the module...
* Committing this so we have a start point. Will continue to work on this more today.
* It seems kind of silly to be building a 256x256 array just to use two 16 float blocks.. but for now the layerdata routine requires it so we'll go along with that.
* We only fill a 32x16 area of the 256x256 float array with data.
* We use patches 0,0 and 0,1 for the first and second patch to determine the direction and magnitude of the wind.
Scene. Make the script engines check that the engine name in the
//Engine:language comment is a valid engine and treat it as a normal
comment if it's not.
//DotNetEngine: needs to be written as //ScriptEngine.DotNetEngine: now, since
that is it's real internal name. //XEngine: still works
Check the client dialog box (from top menu) WORLD / REGION ESTATE
/ REGION tab. The client dialog box seems to have a hard limit of
about 32 characters per line available for displaying the region
version number. Our regions are sending a string which is greater
than the limit, causing the client to wrap the text and look ugly.
* A little wind wouldn't hurt anyone, right? This is the 'slightly breezy' setting.. hopefully you won't notice 'much' of a difference.
* It turns out the terrain patch routine is similar enough to the wind version that it can be used to hack together a breeze generator with a few mods.
* Not much configuration.. yet. You only get breeze updates in the general vicinity of your camera now to keep bandwidth usage down.. and we're not talking about 'much' movement at the moment.
* initial version... could use improvement I'm sure.
Active gestures are sent as part of the login-response. Added
fetchActiveGestures to SQLite and MySQL; added an empty one for MSSQL and
NHibernate. Using the empty ones won't cause errors, but doesn't provide
persistence either, of course.
diva