-- addition of varaible region size in X and Y
-- internal storage of heightmap changed from double[] to short[]
-- helper routines for handling internal structure while keeping existing API
-- to and from XML that adds region size information (for downward compatibility,
output in the legacy XML format if X and Y are 256)
Updated and commented Constants.RegionSize but didn't change the name for compatibility.
to denote terrain format revision.
Add terrain DB format revision codes to ISimulationDataStore.cs.
Setup so legacy compatible terrain storage and fetch is possible while
allowing future format extensions.
count number to integer world coordinates.
Added new methods RegionWorldLoc[XY].
Refactored name of 'RegionLoc*' to 'LegacyRegionLoc*' throughout OpenSim.
Kept old 'RegionLoc*' entrypoint to RegionInfo for downward compatability
of external region management packages.
This check is necessary to close a race condition where the CompleteAgentMovement processing could proceed when the UseCircuitCode thread had added the client to the client manager but before the ScenePresence had registered to process the CompleteAgentMovement message.
This is most probably why the message appeared to get lost on a proportion of entity transfers.
A better long term solution may be to set the IClientAPI.SceneAgent property before the client is added to the manager.
There is a possibilty that some V2 teleport failures are due to the viewer triggered CompleteMovement thread not seeing the change of m_originRegionID by the UpdateAgent thread.
This is specified in the MaxOutgoingTransferVersion attribute of [EntityTransfer] in OpenSim.ini, see OpenSimDefaults.ini for more details.
Default remains "SIMULATION/0.2"
Primarily for http://opensimulator.org/mantis/view.php?id=6755
Need an info message since this is currently important in detecting teleport issue when not at debug log level.
CompleteMovement message occurs before MakeRootAgent() one did
This reverts commit c7ded0618c.
This proves not to be necessary - the necessary checks are already being done via QueryAccess() before cross or teleport
This is necessary because the hypergrid groups checks (as referenced by estates) require an agent circuit to be present to construct the hypergrid ID.
However, this is not around until Scene.NewUserConnection(), as called by CreateAgent() in EntityTransferModule.
Therefore, if we're dealing with a hypergrid user, delay the check until NewUserConnection()/CreateAgent()
The entity transfer impact should be minimal since CreateAgent() is the next significant call after NewUserConnection()
However, to preserve the accuracy of query access we will only relax the check for HG users.
This occurs on v2 teleport since the source region now waits 15 secs before closing the old child agent, which could still receive chat.
This commit introduces a ScenePresenceState.PreClose which is set before the wait, so that ChatModule can check for ScenePresenceState.Running.
This was theoretically also an issue on v1 teleport but since the pause before close was only 2 secs there, it was not noticed.
Also separates out log messages to distinguish between close not finding an agent and wrong auth token, and downgrades former to debug and latter to warn
If this is attempted, they get a "Try moving closer. Can't sit on object because it is not in the same region as you." message instead, which is the same as current ll grid.
Sitting on ground is okay, since viewer navigates avatar to required region first before sitting.
This approach has problems if a client quits without sending a proper logout but then reconnects before the connection is closed due to inactivity.
In this case, the DoNotCloseAfterTeleport was wrongly set.
The simplest approach is to close child agents on teleport as quickly as possible so that races are very unlikely to occur
Hence, this code now closes child agents as the first action after a sucessful teleport.
IncomingCloseAgent() now sets the scene presence state machine properly, which is necessary to avoid races between multiple sources of close.
Hence, it's also necessary for everyone to consistently call IncomingCloseAgent()
Calling RemoveClient() directly is currently generating an attention-grabbing exception though this right now this is harmless.
This is giving much better results on teleports between simulators over my lan where for some reason there is a pause before the receiving simulator processes UpdateAgent()
At this point, v2 teleports between neighbour and non-neighbour regions on a single simulator and between v2 simulators and between a v1 and v2 simulator
are working okay for me in different scenarios (e.g. simple teleport, teleport back to original quickly and re-teleport, teleport back to neighbour and re-teleport. etc.)
This was occuring because teleport to B did not set DoNotCloseAfterTeleport on A as it was a neighbour (where it isn't set to avoid the issue where the source region doesn't send Close() to regions that are still neighbours (hence not resetting DoNotCloseAfterTeleport).
Fix here is to still set DoNotCloseAfterTeleport if scene presence is still registered as in transit from A
The root cause was that v2 was only closing neighbour agents if the root connection also needed a close.
However, fixing this requires the neighbour regions also detect when they should not close due to re-teleports re-establishing the child connection.
This involves restructuring the code to introduce a scene presence state machine that can serialize the different add and remove client calls that are now possible with the late close of the
This commit appears to fix these issues and improve teleport, but still has holes on at least quick reteleporting (and possibly occasionally on ordinary teleports).
Also, has not been completely tested yet in scenarios where regions are running on different simulators
cap is something other than "localhost". A new interface for handling
external caps is supported with an example implemented for Simian. The
only linden cap supporting this interface right now is the GetTexture
cap.
The major departure from flotsam is to send only one message per destination region, as opposed to one message per group member. This reduces messaging considerably in large groups that have clusters of members in certain regions.
This is a test setup failure since code paths when adding a duplicate root scene presence now require the EntityTransferModule to be present.
Test fixed by adding this module to test setup
These were genuine failures caused by ScenePresence.CompleteMovement() waiting for an UpdateAgent from NPC introduction that would never come.
Instead, we do not wait if the agent is an NPC.
- Child and root agents are only closed after 15 sec, maybe
- If the user comes back, they aren't closed, and everything is reused
- On the receiving side, clients and scene presences are reused if they already exist
- Caps are always recreated (this is where I spent most of my time!). It turns out that, because the agents carry the seeds around, the seed gets the same URL, except for the root agent coming back to a far away region, which gets a new seed (because we don't know what was its seed in the departing region, and we can't send it back to the client when the agent returns there).
This prevents an issue if the user teleports back to the neighbour simulator of a source before 15 seconds have elapsed.
This more closely emulates observed linden behaviour, though the timeout there is 50 secs and applies to all the pre-teleport agents.
Currently sticks a DoNotClose flag on ScenePresence though this may be temporary as possibly it could be incorporated into the ETM state machine
In this new protocol, and as committed before, the viewer is not sent EnableSimulator/EstablishChildCommunication for the destination. Instead, it is sent TeleportFinish directly. TeleportFinish, in turn, makes the viewer send a UserCircuitCode packet followed by CompleteMovementIntoRegion packet. These 2 packets tend to occur one after the other almost immediately to the point that when CMIR arrives the client is not even connected yet and that packet is ignored (there might have been some race conditions here before); then the viewer sends CMIR again within 5-8 secs. But the delay between them may be higher in busier regions, which may lead to race conditions.
This commit improves the process so there are are no race conditions at the destination. CompleteMovement (triggered by the viewer) waits until Update has been sent from the origin. Update, in turn, waits until there is a *root* scene presence -- so making sure CompleteMovement has run MakeRoot. In other words, there are two threadlets at the destination, one from the viewer and one from the origin region, waiting for each other to do the right thing. That makes it safe to close the agent at the origin upon return of the Update call without having to wait for callback, because we are absolutely sure that the viewer knows it is in th new region.
Note also that in the V1 protocol, the destination was getting UseCircuitCode from the viewer twice -- once on EstablishAgentCommunication and then again on TeleportFinish. The second UCC was being ignored, but it shows how we were not following the expected steps...
- The existing event to scene has been split into 2: OnAgentUpdate and OnAgentCameraUpdate, to better reflect the two types of updates that the viewer sends. We can run one without the other, which is what happens when the avie is still but the user is camming around
- Added thresholds (as opposed to equality) to determine whether the update is significant or not. I thin these thresholds are ok, but we can play with them later
- Ignore updates of HeadRotation, which were problematic and aren't being used up stream
Revert "Trying to reduce CPU usage on logins and TPs: trying radical elimination of all FireAndForgets throughout CompleteMovement. There were 4."
This reverts commit 6825377380.
BestAvatarResponsiveness introduces the region rez delay in cases where the region is full of avatars with lots of attachments, which is the case in CC load tests. In that case, the inworld prims are sent only after all avatar attachments are sent. Not recommended for regions with heavy avatar traffic!
Justin, if you read this, there's a long story here. Some time ago you placed SendInitialDataToMe at the very beginning of client creation (in LLUDPServer). That is problematic, as we discovered relatively recently: on TPs, as soon as the client starts getting data from child agents, it starts requesting resources back *from the simulator where its root agent is*. We found this to be the problem behind meshes missing on HG TPs (because the viewer was requesting the meshes of the receiving sim from the departing grid). But this affects much more than meshes and HG TPs. It may also explain cloud avatars after a local TP: baked textures are only stored in the simulator, so if a child agent receives a UUID of a baked texture in the destination sim and requests that texture from the departing sim where the root agent is, it will fail to get that texture.
Bottom line: we need to delay sending the new simulator data to the viewer until we are absolutely sure that the viewer knows that its main agent is in a new sim. Hence, moving it to CompleteMovement.
Now I am trying to tune the initial rez delay that we all experience in the CC. I think that when I fixed the issue described above, I may have moved SendInitialDataToMe to much later than it should be, so now I'm moving to earlier in CompleteMovement.
A separate PhysicsActor variable is used in case some other thread removes the PhysicsActor whilst this code is executing.
If this is now impossible please revert - just adding this now whilst I remember.
Also makes method comment into proper method doc.
This currently prints caps requests received and handled, so that overload of received compared to handled or deadlock can be detected.
This involves making BaseStreamHandler and BaseOutputStream record the ints, which means inheritors should subclass ProcessRequest() instead of Handle()
However, existing inheriting classes overriding Handle() will still work, albeit without stats recording.
"show caps" becomes "show caps list" to disambiguate between show caps commands
also moves the implementing code into LLUDPServer.cs along with other debug commands from OpenSim.cs
gets all debug lludp commands to only activate for the set scene if not root
This cannot be triggered as an event from Scene.EventManager since some invocations of UuidGatherer (e.g. IAR saving) use scene objects which are not in scenes.
There needs to be some way for modules to register for events which are not connected with a particular scene.
This is in order to reduce the likelihood of naming clashes, make it easier to filter in/out attributes, ensure uniformity, etc.
All dynattrs in the opensim distro itself or likely future ones should be in the "OpenSim" namespace.
This does alter the underlying dynattrs data structure. All data in previous structures may not be available, though old structures should not cause errors.
This is done without notice since this feature has been explicitly labelled as experimental, subject to change and has not been in a release.
However, existing materials data is being preserved by moving it to the "Materials" store in the "OpenSim" namespace.
Functionally the same as the patch by tglion in http://opensimulator.org/mantis/view.php?id=5334
However, not yet perfect - after editing just root prim on reattach the position is still wrong, though other prims are not set to far off positions.
This was introduced in git master d214e2d0 (Thu May 16 17:12:02 2013)
Caught out by the fact that value types used in iterators act like references and this was dispatched asynchronously.
Should address http://opensimulator.org/mantis/view.php?id=6658
This is because scripts (at least on XEngine) start unsuspended - deceptively the ResumeScripts() calls in various places in the code are actually completely redundant (and useless).
The solution chosen here is to use a copy of the SP attachments and not have the list locked whilst creating the scripts when an avatar enters the region.
This looks to address http://opensimulator.org/mantis/view.php?id=6557
This purports to fix the issue described in http://opensimulator.org/mantis/view.php?id=6653 where the camera can end up following the requested sit prim rather than the actual.
The original spot was by Vegaslon, this commit just goes about it in a slightly different way
This commit also makes m_requestedSitTargetUUID to be the actual UUID, which is consistent with m_requestedSitTargetID which was already doing this.
However, this adjustment has no practical effect since we only currently need to know that there's any requested sit UUID at all, not which one it is.
The UMMTGUN form of Unknown User seems to appear because a viewer sometimes sends a UUIDNameRequest UDP request that fails to find a binding.
However, in theory the incoming agent should have made that binding before any such request is triggered.
So moving this binding to an earlier point in the process to see if this makes a difference.
Unknown user name is also updated to UserUMMTGUN2 - if you see the old name then you need to clear your viewer cache.
This relates to http://opensimulator.org/mantis/view.php?id=6625
to avatar when it becomes root. This packet shows up in the viewer
logs as an error and appears to cause problems for completing the
texture rebake process for v1 viewers in some cases.
This is controlled by the viewer, not the server.
So as per http://wiki.secondlife.com/wiki/LlSetSoundQueueing, only two sounds can be queued per prim.
You probably need to use llPreloadSound() for best results
This is to reduce race conditions where neighbours may be responding erratically, thus mixing up create and close agent requests in time.
This mirrors OpenSimulator behaviour on enabling child agents where each region is contacted separately.
This was because this particular code path (unlike user delete) only sent kills to root presences, for no apparent good reason.
Added regression test for this case.
This fixes http://opensimulator.org/mantis/view.php?id=6627
This fixes the combined bounding box location for regions bigger than 256x256.
It also fixes the position on taking coalesced objects in the non-root regions, where position checks are properly done on rez instead.
It also fixes the megaregion land channel to return null if the land does not exist, which should probably also be done for the ordinary land channels rather than returning a dummy region.
Inspiration from Garmin's commit in http://opensimulator.org/mantis/view.php?id=6595. Thanks!
This was because AsyncCommandManager was handing an item ID to IHttpRequestModule.StopHttpRequest() rather than the expected request ID.
This commit also makes the http request asynchronous using BeginGetResponse() rather than doing this by launching a new thread
so that we can more safely abort it via HttpWebRequest.Abort() rather than aborting the thread itself.
This also renames StopHttpRequest() to StopHttpRequestsForScript() since any outstanding requests are now aborted and/or removed.
By checking against the grid's Avatar data, we can ignore viewer side attachments but still initiate these calls simulator-side.
Initiating simulator-side is always necessary for version 1 viewers.
This is a further commit to resolve http://opensimulator.org/mantis/view.php?id=6581
This was because the script resumption in AttachmentsModule was firing the attach event instead.
Had to reinstate the code in 285bd3a do we can resume the scripts there instead, though the bug existed before its removal.
This is to resolve http://opensimulator.org/mantis/view.php?id=6578
This is a further effort to reduce v3 viewer race conditions where this call may clash with the viewer signalling attachment wearing from its current outfit folder.
This is to simplify the code (no tricky 'wasChild' signalling required)
and to reduce the risk of a thread clash between simulator-side attaching (necessary for v1 viewers)
and the viewer-side attaching the v3 viewers perform.
with our own and add export permissions as well as a new definition for "All" as meaning "all conventional permissions" rather than "all possible permissions"
This now does a check for border crossing (required to trigger the teleport) immediately in SP.MakeRootAgent().
If left any later, it looks like the physics scene changes the position and stops the cross happening.
If done any earlier, nothing happens because the cross-code currently requires a PhysicsActor to be in place, thuogh it's probably not necessary for this case.
Also adds regression test for the case where the viewer couldn't connect with the destination region.
Also refactoring of regression test support code associated with entity transfer in order to make this test possible and the code less obscure.
This resolves issues (at least in my tests with LL 3.3.4) where this can make attachments invisible until one zooms in on the avatar.
This doesn't affect version 1 viewers since this delay is shorter than the login delay.
This doesn't increase the login time since this part of the process was already being performed asynchronously.
This may be a temporary solution.
For some reason, sending updates before this will not have this effect.
This may be something related to some viewers (e.g. LL 3.3.4) or something OpenSimulator isn't getting quite right.
This addresses http://opensimulator.org/mantis/view.php?id=6567
This creates a ScenePresence.GetWorldRotation() with the same semantics as SOP.GetWorldRotation()
SP.Rotation can't be used since it's relative to the sat upon prim if the avatar is sitting.
This allows region modules to add dynamic objects to SOPs rather than having to continually push and pull OSD dynamic attributes.
This is to explore the original MOAP use case for dynamic attributes where it could be very awkward and possibly time-consuming to keep reconstructing MediaEntrys from stored DynamicAttributes.
This commit adds a DOExampleModule to demonstrate/evolve this code.
Dynamic objects involve no storage or persistence changes - the 'backing store' for any data that does need to be saved will remain the DAMap.
DOExampleModule in this commit only attaches a fresh dynamic object. Actually constructing this from stored dynamic attributes and handling persistence is left for later.
These changes should affect no existing functionality, though it may or may not reveal necessary changes in DAMap down the road.
This change also corrects the setting names - they were actually wrong (though the text in {} was correct).
If there are settings in [Startup] they will continue to be used and anything there will override settings in [AccessControl]
Existing map settings in [Startup] will continue to work, and if present will override anything in [Map]
However, the proper place for such settings would now be [Map]
This is to reduce the use of [Startup] as a bag for non-generic settings which should really go in sections, in common with other settings.
This commit also extends Diva's previous work to allow a default setting to be given when looking at multiple sections for settings.
This is for consistentency with the verb:noun naming approach existing json script functions and other script functions.
Corresponding c# methods also changed since verb:noun is also the .net c# method naming guideline (as used by OpenSimulator) and for consistency with script functions.
As agreed with cmickeyb
interface. JsonPathType returns the type of node pointed to by the
path and deprecates the functionality of both JsonTestPath
functions. JsonArrayLength returns the length of an array node.
Fix bug that allowed only login access to regions with mis-configured telehubs. Administrators now have teleport access when there exists a mis-configured telehub in the region. Estate owners are now placed at region center in the absence of spawnpoints instead of being denied access. Grid Gods are unrestricted. All others are denied access to the region until spawnpoints are assigned to the telehub object.
script functions. Adds JsonAttachObjectStore to associate a store identifier with
an object (scripts can only access the store in their host object, this could be
extended but isn't necessary for now).
Note this opens a method to the DAMap OSDMap. This will be removed later, but
greatly simplifies the code for now.
The JsonStore and these scripts are disabled by default.
Implements the parameters as properties, the serialization and
database storage (MySQL only). Implements llSetPrimitiveParams for
prim physics shape and the other 4 extra params. Only the prim shape type
"None" is currently functional. No support for the Viewer UI (yet), that
will be ported in due course. Lots more to port, this is a large-ish changeset.
This would practically never happen.
This makes this overloaded version of the function consistent with the other version.
It looks like this accidentally came over in commit c5af16a from Tue Oct 16 12:40:21 2012
However, there's arguably a case for looking for an item name that matches a UUID before assuming that the identifier is already an asset ID.
Renames functions to better reflect what they do.
This is so that code registering with modInvoke() can reuse this code to provide functions that behave in a consistent manner with existing LSL/OSSL functions.
This is mostly Bluewall's work but I am also bumping the general version number
OpenSimulator 0.7.5 remains in the release candidate stage.
I'm doing this because master is significantly adding things that will not be in 0.7.5
This update should not cause issues with existing external binary DLLs because our DLLs do not have strong names
and so the exact version match requirement is not in force.
This also changes UuidGatherer to reutn an AssetType.Unknown for embedded script/lsl references instead of Texture, since these are often not textures.
This is added to help people in determining when they have missing assets such as textures, etc.
In this case, one wants to run "fcache clear" first.
sends an asset transaciton but it is empty. So we can't ignore name data
when a transaction is present and can't treat every transaction as valid.
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.Inventory.cs
Also hooks up moving_start and moving_end script events, eliminating itemID on XEngine EventManager methods since this is completely unused.
An adaptation of the patch in http://opensimulator.org/mantis/view.php?id=6515
Thanks Garmin Kawaguichi and Signpost Marv.
This makes use of EventWaitHandles since various web references indicate that Thread.Interrupt() can also cause runtime instability.
If co-op termination is enabled, then termination sets the wait handle instead of waiting for a timeout before possibly aborting the thread.
This allows the script to cleanly terminate if it's in a llSleep/LL function delay or the next time it enters such a wait without any timeout period.
Co-op termination is not yet testable since checking for termination request within loops that never trigger a wait is not yet implemented.
This commit, unlike 1b5c41c, passes the wait handle as an extra parameter through IScript.Initialize() instead of passing IScriptInstance itself.
This makes use of EventWaitHandles since various web references indicate that Thread.Interrupt() can also cause runtime instability.
If co-op termination is enabled, then termination sets the wait handle instead of waiting for a timeout before possibly aborting the thread.
This allows the script to cleanly terminate if it's in a llSleep/LL function delay or the next time it enters such a wait without any timeout period.
Co-op termination is not yet testable since checking for termination request within loops that never trigger a wait is not yet implemented.
This involves making Attachments module listen for start/stop script changes.
It also involves removing the script from the region on detach in the same manner as every other DeleteSceneObject() call rather than simply stopping it
This is necessary tue to the bad assymetry of start and stop script triggers but it appears to be the correct behaviour anyway, as detached objects are completely gone from the sim.
Not just in a state where their scripts have been stopped.
As per http://wiki.secondlife.com/wiki/LlGetLinkKey
This is done by keeping a scene-object wide list of sitters.
This also fixes bugs in this function where linknums 0 and 1 weren't treated properly if there were sitting avatars on a single prim.
This also fixes a minor race condition for multiple concurrent sitters on a prim with no current sitters by locking on the object-wide list rather than individual sop lists
Addresses http://opensimulator.org/mantis/view.php?id=6477
When an object is removed, its scripts are stopped and then the thread running them is aborted if stop takes too long.
However, it appears that aborting a thread at just the wrong moment when it is obtaining a ReaderWriterLockSlim lock can leave this lock in an inconsistent state.
One symptom of this is that mono leaps to 100% cpu and a vm thread dump reveals lots of threads waiting for a ReaderWriterLockSlim lock without any thread actually holding it.
This is probably the same problem as encountered originally in commit 12cebb12
This commit looks to plaster this problem by putting lock obtaining methods inside finally blocks which should be uninterruptible by thread aborts.
Oren Hurvitz