Further filters "debug packet <level>" to exclused [Request]ObjectPropertiesFamily if level is below 25.
Adjust some method doc
Minor changes to some logging messages.
There were two problems here:
1) On object group update, we looked for the group is the IClientAPI group cache rather than in the groups service. This fails to groups created newly in that session
2) On object group update, we weren't setting the HasGroupChanged flag. This meant that the change was not persisted unless some other action set this flag.
This commit fixes these issues and hopefully addresses http://opensimulator.org/mantis/view.php?id=5588
This commit also moves HandleObjectGroupUpdate() to the GroupsModule from the Scene.PacketHandlers.cs file
The caller is already an async thread from LLClientView so this doesn't hold up the client.
However, launching on a separate thread does remove the effect of m_setAppearanceLock
This was potentially allowing two different SetAppearance threads to interfere with each other, though this probably rarely happens, if at all.
This is required for the substitution of different HTTP servers or the newer HttpServer.dll without having to commit to a particular implementation.
This is also required to write regression tests that involve the HTTP layer.
If you need to recompile, all you need to do is replace OSHttpRequest/OSHttpResponse references with IOSHttpRequest/IOSHttpResponse.
This required an option to be added to NullRegionData via ConnectionString for it to act as a non-static instance, so that regression tests (which only load this class once) don't get hopeless confused and complex to compensate.
Normal standalone operation unaffected.
This is misleading since a simulator will call this method before successfully trying remote regions.
Also comments out spammy "[SIMULATION]: Stream handler called" AgentHandlers messages for now.
This might help with
[USER AGENT CONNECTOR]: new connector to ()
[USER AGENT CONNECTOR]: Unable to contact remote server for GetServerURLs
[USER AGENT CONNECTOR]: Malformed Uri : Argument cannot be null.
Parameter name: uriString
Executing this asynchronously allows a race condition where subsequent friends fetches hit a cache that FetchFriendsList() had not yet populated.
Changing this to synchronous may improve issues where a user does not see friends as online even though they are.
I don't believe synchronous is a problem here, but if it is, then a more complicated signalling mechanism is required. Locking the cache isn't sufficient.
from previous commit which sort out which iterator is used are left
intact. A discussion is needed as to what constitutes an avatar vs a
ScenePresence.
the 3 iteration functions so more of them are using the correct
iteration for the action they are performing. The 3 iterators that seem
to fit all actions within OpenSim at this time are:
ForEachAvatar: Perform an action on all avatars (root presences)
ForEachClient: Perform an action on all clients (root or child clients)
ForEachRootClient: Perform an action on all clients that have an avatar
There are still a dozen places or so calling the old
ForEachScenePresence that will take a little more refactoring to
eliminate.
UpdateFlag is now referenced/used only within SOP and SOG. Outsiders are
using ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule on
SOP consistently now. Also started working toward eliminating those
calls to ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule
from outside SOP in favor of just setting properties on SOP and let SOP
decide if an update should be scheduled. This consolidates the update
policy within SOP and the client rather than everywhere that makes
changes to SOP. Some places forget to call update while others call it
multiple times, "just to be sure".
UpdateFlag and Schedule*Update will both be made private shortly.
UpdateFlag is intended to be transient and internal to SOP so it has
been removed from XML serializer for SOPs.
In AvatarFactoryModule.HandleAppearanceUpdateTimer(), we loop through appearance save and send requests and dispatch via a FireAndForget thread.
If there was more than one request in the save or send queue, then this led to a subtle race condition where the foreach loop would load in the next KeyValuePair before the thread was dispatched.
This gave the thread the wrong avatar ID, leaving some avatar appearance cloudy since appearance data was never sent.
This change loads the fields into local references so that this doesn't happen.
This should be unecessary since the folder update is already made at the time of the offer (and moved to trash if not accepted).
This code was also not taking into account the situation where an item was accepted.
Needs more fixing if this results in an aggression elsewhere.
This is necessary so that code in HttpServer can use framework facilities such as the thread watchdog for monitoring purposes.
Doing this shuffle meant that MainServer was moved into OpenSim/Framework/Servers
Also had to make OpenSim.Framework.Console rely on OpenSim.Framework rather than the other way around since it in turn relies on HttpServer
MainConsole and some new interfaces had to be moved into OpenSim/Framework to allow this. This can be reverted if parts of OpenSim.Framework stop relying on console presence (cheifly RegionInfo)
These are disabled by default, as before. Please only turn these on in secure grids, since they allow the same facilities as the existing SetPassword call (also disabled by default)
These facilities can be helpful when integrating external systems, in addition to the existing option of adapting an IAuthenticationService or using WebLoginKey
Unlike the other 3 stats mechanisms, monitor data can be queried per individual region, which makes this useful.
This doesn't affect an of the existing monitored stats.
ways to access the list/dictionary of child regions and locking was
inconsistent. There are now public properties which enforce locks.
Callers are no longer required to create new copies of lists.
Original request URLs that end with / will still work, but this will allow one to type /simstatus as well as /simstatus/
Can't do this with webstats yet since it does insane things to the path.
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
If a user account isn't available, this just passes on the name given by the agent instead.
I'm not sure this is particularly useful since I believe that agent names could be faked in this context - it might be no more useful than a viewer agent string.
In fact, there might even be an argument that passing on this name provides a false expectation of authenticity. However, I will apply for now.
Patch applied from http://opensimulator.org/mantis/view.php?id=5696
Thanks Michelle Argus.
When a slider parameter is changed, the viewer uploads a new shape (or other asset) and the item is updated to point to it.
Viewer 1 uploaded the data in the initial request itself, so the asset references was almost always correctly updated.
However, viewer 3/2 always uploads data in a subsequent xfer, which exposed a race condition where the viewer would make the item update before the asset had uploaded.
This commit shuffles the order of operations to avoid this race, the item is updated with the new asset id instead of the old one while the upload was still taking place.
A second race had to be fixed where avatar appearance would also be updated with the old asset id rather than the new one.
This was fixed by updating the avatar appearance ids when the appearance was actually saved, rather than when the wearables update was made.
It turns out that the HG lure module was setting up a pending lure when it intercepted the instant message on its way out to the target avatar.
However, an IM would only be sent if the user was remote, so it would not be set up for users on the same sim or in an immediate neighbour.
We fix this by adding the pending lure when the message goes out and ignoring a duplicate pending lure add if it goes to out via IM.
Hopefully addresses http://opensimulator.org/mantis/view.php?id=5690
Viewer 2 no longer contains the default avatar assets (i.e. "Ruth") that would appear if the user had insufficient body part/clothing entries.
Instead, avatars always appear as a cloud, which is a very bad experience for out-of-the-box OpenSim.
Default is currently off. My intention is to switch it on for standalone shortly.
This is not particularly flexible as "Ruth" is hardcoded, but this can change in the future, in co-ordination with the existing RemoteAdmin capabilities.
Need to fix creation of suitable entries for users created as estate owners on standalone.
Avatars still appear with spooky empty eyes, need to see if we can address this.
This commit adds a "Default Iris" to the library (thanks to Eirynne Sieyes from http://opensimulator.org/mantis/view.php?id=1461) which can be used.
Viewer 2/3 will sometimes attempt to rewear attachments, even though they have already been attached during the main login process.
This change ignores those attempts.
This stops script failures during login, as the rewearing was racing with the script startup code.
It might also help with attachments being abnormally put into deleted state.
Hopefully resolves some more of http://opensimulator.org/mantis/view.php?id=5644
As far as I can see, this is only invoked by a PUT request to ObjectHandlers, which is not being used anyway.
Invoking attachments code at this point is probably inappropriate since it would still be invoked when the client entered the scene.
Being commented to simplify analysis of attachments issues. Can be uncommented when in use.
Also, small tweak to lock and log removal of a SOG from the SceneObjectGroupsByLocalPartID collection in SceneGraph.GetGroupByPrim() if an inconsistency is found.
Attach and detach packets are processed asynchronously when received from a viewer.
Bugs like http://opensimulator.org/mantis/view.php?id=5644 indicate that in some situations (such as attaching/detaching entire folders of objects at once), there are race conditions between these threads.
Since multiple data structures need to be updated on attach/detach, it's not enough to lock the individual collections.
Therefore, this commit introduces a new IScenePresence.AttachmentsSyncLock which add/remove operations lock on.
Leaving them at UUID.Zero meant that when a viewer 2 logged into a region that had been freshly created, it received UUID.Zero for these textures, and hence display the land as plain white.
On a simulator restart, the problem would go away since when the database adapators loaded the new region settings, RegionSettings itself has code to use default textures instead of UUID.Zero.
This commit resolves the problem by saving the default texture UUIDs instead of Zero.
However, we currently have to do this in a roundabout way by resaving once the RegionSettings have been created by the database for the first time. This needless complexity should be addressed.
This change will also have the effect of replacing any existing UUID.Zero terrain textures with the default ones.
However, this shouldn't have any effect since the UUID.Zeros were already being replaced in memory with those same UUIDs.
This is to address http://opensimulator.org/mantis/view.php?id=5669
However, if this failure was happening I'm kind of surprised that local HG inventory was working at all.....
We probably weren't seeing these exceptions previously because we weren't logging them when the reached the top of a FireAndForget thread.
This is for http://opensimulator.org/mantis/view.php?id=5669
If we can't retrieve an IUserManagement module we complain, and we also warn in the log when its manually set in XISC by HGInventoryBroker
When a user logs in, the attachment item ids are pulled from persistence in the Avatars table. However,
the asset ids are not saved. When the avatar enters a simulator the attachments are set again. If
we simply perform an item check then the asset ids (which are now present) are never set, and NPC attachments
later fail unless the attachment is detached and reattached.
Hopefully resolves part of http://opensimulator.org/mantis/view.php?id=5653
The code in question is over three years old and just be catching an inconsistency rather than being wholly necessary.
This commit still carries out the check and prints all the previous log warnings but a 'failure' no longer prevents avatar region crossing or teleport, and it doesn't give the client the error message.
This will have some kind of impact on http://opensimulator.org/mantis/view.php?id=5672
Not doing this causes NREs whenever that user tries to access inventory when Hypergrid is turned on since the Remote connector does not have a scene (which is only used to fetch the UserManager)
Aims to address http://opensimulator.org/mantis/view.php?id=5669
This was happening because we were using the source avatar's item IDs in the clone appearance.
Switch to using the asset IDs of attachments instead for NPCs.
The InventoryAccessModule and AttachmentModule had to be changed to allow rezzing of an object without an associated inventory item.
Hopefully goes some way towards resolving http://opensimulator.org/mantis/view.php?id=5653
This method wasn't actually doing anything since dropped attachments retain a PCode of 9.
Also, behaviour of dropped attachments in other places appears to be that they persist after avatar logout rather than get deleted.
Even though we don't use these on rez they are still present after an unlink, after which selecting them causes various viewers to crash
Hopefully really does address http://opensimulator.org/mantis/view.php?id=5664
It's never possible for SOG to have no RootPart, except in the first few picosends of the big bang when it's pulled from region persistence or deserialized
The only times when ParentGroup might be null is during regression tests (which might not be a valid thing) and when scene objects are being constructed from the database.
At all other times it's not possible for a SOP not to have a SOG parent.
The approach here, as in other parts of OpenSim, is to return a copy of the list rather than the attachments list itself
This prevents callers from forgetting to lock the list when they read it, as was happening in various parts of the codebase.
It also improves liveness.
This might improve attachment anomolies when performing region crossings.
Apart from one obvious bug, this was failing because attempting to serialize the script from inside the script (as part of saving the attachment as an inventory asset) was triggering an extremely long delay.
So we now don't do this. The state will be serialized anyway when the avatar normally logs out.
The worst that can happen is that if the client/server crashes, the attachment scripts start without previous state.
llRegionSay will now message avatars on chan 0
and will message attachments on the avatar that
listen on channels other than 0.
This behavior is consistant with the LL
implementation as tested on regions in Agni
with one exception: this implementation does
not include issue:
https://jira.secondlife.com/browse/SCR-66?
This meant punching in another AddUser() method in IUserManagement to do a direct name to UUID associated without the account check (since NPCs don't have accounts).
May address http://opensimulator.org/mantis/view.php?id=5645
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
This executes the callback on the same thread that made the request. Designed for use only by regression tests that rely on a predicable event ordering.
Copying doesn't prevent IOExceptions on Windows due to file locking. (e.g. Mantis 5642, 5630).
So instead go back to moving the file, swallowing IOExceptions that occur just for the move due to competing caching threads or even different opensimulator instances.
This hopefully addresses http://opensimulator.org/mantis/view.php?id=5634
This is the most probable cause of the memory problems that people have been seeing in the past month.
This bug has been around since commit 5dc785b (4th July 2011). Doh! This is why regressions tests are such a good idea... :)
Many thanks to Nebadon for using git bisect to track down this bug, which made it a 5 minute fix.
This works by serializing and deserializing NPC AvatarAppearance to a notecard in the prim inventory and making the required baked textures permanent.
By using notecards, we avoid lots of awkward, technical and user-unfriendly issues concerning retaining asset references and creating a new asset type.
Notecards also allow different appearances to be swapped and manipulated easily.
This also allows stored NPC appearances to work transparently with OARs/IARs since the UUID scan will pick up and store the necessary references from the notecard text.
This works in my basic test but is not at all ready for user use or bug reporting yet.
Avatar moves and stops. However, will stop in mid stride.
And if the move to position is in the air, avatar will continue to make vain and quite hilarious attempts to take off (but never doing so).
Clearly more work is needed.
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517, this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
Users should not be given the impression that they can modify these items.
This still does not solve the issue where library items cannot be dragged into prims or user inventory any time after they are initially seen.
Curiously, manually copying and pasting still appears to work.
On the surface, this seems to have something to do with library item caching on the client, since deleting the cache allows drag to work again once
Not sure what the exact problem is.
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
RemoteGridService connector. Timeout is currently set at five
minutes. Negative results are not cached.
The result is that operations like send an instant message do
not have to go through the grid service every time.
For the most part, defaults are made to match those already in FlotsamCache.ini.example.
The one exception is that the 48 hour file timeout from the code is used instead of the 0 hours that was in the example file. This can be tweaked if necessary.
Most importantly, the default cache directory is now ./assetcache (as in FlotsamCache.ini.example) rather than ./FlotsamAssetCache (as was the internal code default).
Therefore, if you were using flotasm without using the config file, then please rename your cache directory or start using the ini file and change the default there if you want to keep using your existing cache.
Like "save oar", this saves an iar without assets
This can be useful for backup when you know the required assets will still be present (e.g. you're backing up the assets db separately).
This also bumps the iar format version to 0.3 and 1.2 respectively.
0.3 is backward compatible with previous opensim versions
1.2 is used if the --profile switch is specified. It is only compatible with 0.7.1 presently.
This adds a <assets_included>true|false</assets_included> element to the oar control file, though this is not used on reloading at this time.
This addition is backward compatible with previous opensim releases
This switch stops any assets being saved in the oar.
This can be useful if you're using OAR to backup regions and you know you'll always have the original asset database available.
At the moment, this command just asks the AvatarFactory to perform the existing baked texture check for each avatar in the simulator and returns "OK" or "corrupt".
This is for debugging purposes
Diva Canto