2b26d2f1a5
prevent "create region" console command from being able to create a region with the same id as one that already exists.
...
Addresses http://opensimulator.org/mantis/view.php?id=5617
2011-08-06 01:35:01 +01:00
76f46b2545
Do proper locking of m_localScenes list in SceneManager
2011-08-06 01:15:49 +01:00
dad1d6df18
rename TestHelper => TestHelpers for consistency
2011-08-06 00:31:03 +01:00
bda1a4be45
rename test SceneSetupHelpers -> SceneHelpers for consistency
2011-08-06 00:26:37 +01:00
cba40de109
extend phantom flag regression test to toggle back off
2011-08-06 00:22:14 +01:00
c6c91e6599
refactor: Fold most SOP.ScriptSet* methods back into script code. Simplify.
2011-08-06 00:13:08 +01:00
ba89fc3aa1
Add regression test for setting phantom status on a scene object. This is not yet complete.
2011-08-05 23:42:05 +01:00
f18780d0e3
Get "show region" command in GridService to show grid co-ordinates rather than meters co-ord.
...
This makes it consistent with "show regions"
Addresses http://opensimulator.org/mantis/view.php?id=5619
2011-08-05 22:56:53 +01:00
82f41fdcb5
BulletSim: fix problem with not convex hulling large objects by creating unit meshes and always scaling in Bullet
2011-08-05 14:53:39 -07:00
7d35bf8193
refactor: remove a sliver of unnecessary code
2011-08-05 22:45:42 +01:00
1a2518d19b
Instead of moving the file to its final place when FlotsamCache writes to disk, copy it instead.
...
This is to eliminate IOException where two threads compete to cache the same file.
2011-08-05 19:57:47 +01:00
c3f579046c
Merge branch 'master' into bulletsim
2011-08-05 11:13:02 -07:00
7640b5abf6
BulletSim: Parameters settable from ini file. Linksets. Physical property value tuning
2011-08-05 11:01:27 -07:00
94d496cf2b
remove the largely unused copy/pasted HandleAgentRequestSit() method
2011-08-05 00:57:43 +01:00
1918402cb1
if an NPC target is set to a ground location, then automatically land them when they get there.
...
This doesn't help where the target is a prim surface. In these situations, it might be better to provide manual overrides so the script can control whethre an avatar flys there/lands, etc.
2011-08-04 03:08:35 +01:00
54ce029342
if an NPC move to target is above the terrain then make it fly to destination
2011-08-04 02:31:40 +01:00
f999acd095
minor: remove some mono compiler warnings
2011-08-04 01:46:34 +01:00
c678b75d65
if a move to target is set underground, constrain it to the terrain height
2011-08-04 01:45:56 +01:00
61a931490d
move bAllowUpdateMoveToPosition switch outside of HandleMoveToTargetUpdate()
2011-08-04 01:30:37 +01:00
831f933ce6
only call move target code in SP.HandleAgentUpdate() if we're actually in the process of moving to a position
2011-08-04 01:22:01 +01:00
7b2b47530e
move reset code out of HandleMoveToTargetUpdate() so that we only call it where needed instead of passing in a flag
2011-08-04 01:16:24 +01:00
fc64cc2439
Make SIGNIFICANT_MOVEMENT SP constant a top-level property so that other classes can use it.
2011-08-04 01:05:43 +01:00
7f6f100c5a
When the NPC reaches within the SIGNIFICANT_CLIENT_MOVEMENT distance of the target, move it directly to the target.
...
This makes the movement exact. Regression test changed to check avatar reaches exact target.
Also has the nice side effect of making NPC animations continue to work after the first movement (which wasn't working). However, avatar still pauses in mid-stride
2011-08-04 01:00:33 +01:00
ba0c65e028
extend npc move test to check a second movement
2011-08-04 00:25:51 +01:00
6f913e8caf
eliminate pre-existing unused SP.StopMovement()
2011-08-04 00:13:27 +01:00
a2f5b4ac9a
Rename HandleMoveToPositionUpdate() to HandleMoveToTargetUpdate() for consistency. Improve method doc.
2011-08-04 00:10:53 +01:00
0299cb060e
eliminate a reset position flag by using functionally equivalent DCFlagKeyPressed
2011-08-04 00:06:01 +01:00
6ab01b338f
Stop calling the SP.ResetMoveToTarget() code if a target is not actually set
2011-08-03 23:59:13 +01:00
31fb6b2d72
remove move to duck walk compensation - no longer required.
...
extends npc move to regression test to check stop after sufficient sim updates
2011-08-03 23:40:05 +01:00
61d49d4f63
rename NPC.Autopilot to NPC.MoveToTarget internally. Add method doc to INPCModule
2011-08-03 23:20:36 +01:00
31cea17f8e
extend move test to check avatar is moving in the right direction after setting a move target
2011-08-03 23:13:52 +01:00
21d8a6b0e8
extend move test to check one beat of the simulator without actually asking the npc to move.
2011-08-03 23:06:18 +01:00
d78fe44191
Add passing but incomplete NPC move regression test
2011-08-03 22:51:46 +01:00
e0503d397c
stop avatar service being set up in NPC TestCreate() - it's no longer used
2011-08-03 22:45:43 +01:00
a333c60f28
refactor: rename the move to position methods to move to target to be consistent with terminology used by scene object part and elsewhere
2011-08-03 22:34:05 +01:00
2964467708
get rid of vestigal move to parameters
2011-08-03 22:11:05 +01:00
b7a3f36c65
enable the NPC module for its regression test
2011-08-03 04:48:47 +01:00
797def8aa4
Put config to enable disable [NPC] module.
...
Default is disabled. You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
6e4ec29722
Do a partial fix/implementation of OSSL osNpcMoveTo()
...
Avatar moves and stops. However, will stop in mid stride.
And if the move to position is in the air, avatar will continue to make vain and quite hilarious attempts to take off (but never doing so).
Clearly more work is needed.
2011-08-03 04:19:19 +01:00
68a5fe0431
Improve z axis move to/autopilot so the avatar does alternative crouch/huzzah when walking along the ground
...
Moving a flying avatar to a ground point doesn't yet land the avatar. This may or may not be the best thing
2011-08-03 02:59:49 +01:00
30e816bfa2
Implement move to/autopilot for z axis movement as well.
...
This is jerky (an artifact of the way it's being done, I think), but it's better than on implementation.
2011-08-03 02:04:38 +01:00
0c23764ce2
get autopilot/go here to work immediately.
...
This works with viewer 1.23.5 and so in theory should work with libopenmetaverse.
2011-08-03 01:12:32 +01:00
1c126e6e22
refactor: Move update_movement_flag and the final check inside the m_allowMovement if in HandleAgentUpdate() since it's logically only ever used there
2011-08-03 00:55:52 +01:00
f9689f5cc9
refactor: move out code from HandleAgentUpdate() which processes updates to move to a set position
...
Also comment out the really spammy log message I accidentally left in on the last commit.
2011-08-03 00:46:46 +01:00
74b23210a7
Fix Flotsam cache so it will use the disk cache if the memory cache is enabled
2011-08-02 23:44:40 +01:00
c122489e09
Partially fix autopilot/go here
...
This now works again except that it requires a click or avatar mvmt to get going
This is because the ScenePresence.HandleAgentUpdate() method doesn't trigger until the client does something significant, at which point autopilot takes over.
Even clicking is enough to trigger.
This will be improved presently.
2011-08-02 23:41:12 +01:00
b7f81d3492
If GetRegionByName can't match something in the local db, then search the hypergrid if that functionality has been enabled.
...
This should fix the problem today where old style HG addresses (e.g. "hg.osgrid.org:80:Vue-6400") stopped working since 8c3eb324c4
2011-08-02 01:06:32 +01:00
d2220da205
remove ancient late 2008 cruft that handles the situation where the GetRegionsByName used to not be implemented/returned null.
...
It's impossible that anybody is still running this since the infrastructure has changed massively since that time.
2011-08-02 00:58:08 +01:00
17e9d61f43
Change GridService.GetRegionByName() to only return info if there is an exact region name match, unlike GetRegionsByName()
...
This should fix the first part of http://opensimulator.org/mantis/view.php?id=5606 , and maybe 5605.
Thanks to Melanie for helping with this.
2011-08-02 00:52:48 +01:00
e6fb9d74ef
Revert "In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code."
...
This reverts commit 8d33a2eaa1
2011-08-02 00:40:23 +01:00
8d33a2eaa1
In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code.
...
This also fixes the problem where this method would not return a hypergrid region, unlike GetRegionsByName()
2011-08-02 00:26:17 +01:00
b6ac1c46cd
Get rid of AvatarAppearance.Owner to simplify the code.
...
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
2011-08-02 00:13:04 +01:00
59f548cda8
Get osNpcCreate appearance working with avatars that are currently in the scene.
...
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
2011-08-01 23:41:29 +01:00
05e94ff27e
Move common gemo/agent map name code into CreateGeom()
...
Fix build break.
2011-08-01 07:04:13 +01:00
f9d6a91252
Instead of preserving old name in geom_name_map in change size or shape, use the Name property instead.
...
This is equivalent since the prim 'name' is never changed. In fact, this propery is never used for prims
2011-08-01 06:52:52 +01:00
40a78db182
comment out unused code in OdeScene.TriCallback()
2011-08-01 06:47:45 +01:00
ccb4b76242
On geom removal, remove the name from the OdeScene.geom_name_map too
2011-08-01 06:40:29 +01:00
f79df6f43f
remove the unused ODEPrim.prev_geom field
2011-08-01 06:35:59 +01:00
f32dbef647
When an ODE geom is removed (as when a non-phantom prim is deleted, resized or shape changed, also remove the OdeScene.actor_name_map entry pointing to the phys actor
...
This is to stop a small memory leak over time when prims are deleted or phantom-toggled
2011-08-01 06:32:30 +01:00
6618948ff9
refactor: centralize prim geom removal code from four places to one
2011-08-01 06:15:02 +01:00
509200d5cd
minor: add note to RemovePrimThreadLocked() to the effect that it contrary to the summary, it is being called from within Simulate() lock (OdeLock)
2011-08-01 05:48:27 +01:00
dfa2f7d715
If a prim changes size or shape, add actor to _parent_scene.actor_name_map with new prim_geom key, as the old one becomes invalid.
...
This resolves http://opensimulator.org/mantis/view.php?id=5603 where changing size or shape would stop collision_start being fired in a running script.
In both this and existing code we are not removing old actors from actor_name_map when the existing prim_geom is removed, which leads to a small memory leak over time.
This needs to be fixed.
2011-08-01 05:43:04 +01:00
2102964826
minor: indentation correction
2011-08-01 05:14:16 +01:00
434091d3f4
Allow removing users from search and avatar picker
2011-07-31 17:04:22 +02:00
b757583662
Comment out SOP logging message I accidentally left in
2011-07-31 03:41:35 +01:00
aea7007533
refactor: split out ninja joint part of SOP.DoPhysicsPropertyUpdate() so that we don't have to look at it if it's not relevant
2011-07-31 02:50:50 +01:00
450bdb3657
In the packetpool, if we encounter a data block that somehow wasn't retrieved via GetDataBlock() then create a new stack instead of throwing an exception
2011-07-31 02:30:40 +01:00
d041276517
Remove _mesh field since the mesh data no longer needs to be stored after it's initially used.
...
This may improve memory usage for regions using mesh and sculpts, though I suspect that it doesn't address the current memory leak.
2011-07-31 01:03:52 +01:00
bd8f538f80
refactor: Remove argument to pass in an initial mesh to OdePrim since this is no longer required and it prevents removal of the _mesh field (which is only used temporarily)
...
If passing in a mesh becomes important again in the future then this can be reinstated.
2011-07-31 00:49:49 +01:00
196a774b24
minor: correct method doc for last commit
2011-07-31 00:45:20 +01:00
454312f5bc
refactor: rename CreateGeom _mesh argument to mesh, so as to not confuse this with the pre-existing _mesh field
2011-07-31 00:44:23 +01:00
f1ce17071d
minor: method doc
2011-07-31 00:43:02 +01:00
e08be91c84
Refactor: Replace instances of m_isphysical with IsPhysical rather than have some code reference the private var and other the public var without any functionality difference.
...
Add some method doc to IsPhysical
2011-07-30 23:44:47 +01:00
4f4d080461
refactor: Rename ODEPrim.ParentPrim() to AddChildPrim() for code readability
2011-07-30 23:20:43 +01:00
49a3740ee9
minor: remove mono compiler warnings, some code spacing adjustments
2011-07-30 03:56:29 +01:00
9fc59e2bf2
minor: remove some mono compiler warnings
2011-07-30 03:19:00 +01:00
d917010433
minor: Add method doc to collision subscription methods. Change method case to reflect OpenSim standards.
2011-07-30 03:11:36 +01:00
310a685220
refactor: extract method that generates a physics mesh from prim shape data
2011-07-30 02:34:50 +01:00
4197f66052
refactor: extract code which generate points and faces from sculpt data into it's own method.
...
fix build break.
2011-07-30 02:22:05 +01:00
b0eacadeb4
fix bug in previous commit
2011-07-30 02:09:17 +01:00
122e01949d
refactor: move the code that generates physics meshs from prim mesh data into a separate method, in order to make the code more readable.
2011-07-30 02:08:32 +01:00
7791c1fd1e
Replace the generic exception logging in flotsam asset cache with more specific stuff to return more information.
2011-07-30 01:35:22 +01:00
c4c6b457c3
correct misleading "fcache status" text - deep scans are not performed when this command is invoked.
2011-07-30 01:16:10 +01:00
2f5995f5c0
Temporary code to change bad AvatarHeight values in the AvatarService to the default Ruth height.
...
I was persuaded to do this because simulators on osgrid will persist in inserting bad values for an unknown length of time, even after the original simulator bug which was inserting bad values is out in an osgrid distro
This code can be removed at some point in the future, though I think there is an argument for having services police these values in open grids.
2011-07-30 00:58:17 +01:00
6d866ba6d5
Temporarily put in a log line which shows which locale the user is running in.
2011-07-29 23:43:35 +01:00
9a5e0ede7c
For all Util.FireAndForget invocations, set thread to en_US before continuing wtih the invocation.
...
This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire.
Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this.
Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable.
Arguably, it would be better to do this where data is sent, but doing it here is much easier.
All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
2011-07-29 23:21:57 +01:00
84c68c61bd
When we start the appearance saving thread, make sure we set the culture to En_US so that a different culture doesn't save values with commas as decimal points, etc.
...
This will hopefully stop giants stalking the grid.
See http://opensimulator.org/mantis/view.php?id=5614
2011-07-29 22:27:04 +01:00
5043be13fb
Return null from CreateMeshFromPrimMesher if OpenJPEG decoding of the sculpt data fails.
...
This is to address http://opensimulator.org/mantis/view.php?id=5612
2011-07-29 21:49:23 +01:00
f3c5a5b745
fix extremely minor Ode bug where the _taintedPrimL list would always be cleared on every OdeScene.Simulate() even if it was already empty.
2011-07-29 01:18:42 +01:00
2a39d0cdb0
refactor: Move another chunk of ninja code out of the OdeScene.Simulate() loop for consistency and readability.
2011-07-29 00:51:07 +01:00
3f0d8f3cbf
refactor: Simplify reading OdeScene.Simulate() loop by shunting all the NINJA joints stuff into its own method.
...
Now if ninja joints isn't active (which is the default) don't have to wade through a lot of massively indented irrelevant code.
2011-07-29 00:39:02 +01:00
9c6227da66
refactor: unindent the OdeScene.Simulate() loop to ignore the long commented out ifs and locks
...
This is to make it more readable.
2011-07-29 00:23:42 +01:00
8c3eb324c4
When using osTeleportAgent() and osTeleportAvatar(), only teleport if the region name exactly matches (not near matches)
...
This is to prevent situations where the first name returned by GridService.GetRegionsByName is not one that exactly matches the given region name, even when there is an exact match later on in the list.
Only the above two functions call this teleport method (the map uses a different routine) so this seems safe to change.
Addresses http://opensimulator.org/mantis/view.php?id=5606
2011-07-29 00:00:35 +01:00
c4ffcd4b7d
Ensure that packet headers get parsed correctly
2011-07-27 09:12:00 +01:00
04eaca2af8
Ensure that packet headers get parsed correctly
2011-07-27 08:35:19 +02:00
5c012cac54
Add a timer to monitor the heartbeat. Restart it if it's been dead for
...
5 seconds.
2011-07-25 04:16:53 +02:00
2e83b48873
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-07-23 18:34:46 +02:00
c2de0c930c
Fix failure to find avatars due to trainling spaces being sent by viewers.
2011-07-23 18:29:43 +02:00
4cdc8806fb
Fix LLTextBox to work with the updated libOMV
2011-07-23 11:40:38 +01:00
96174595da
Fix LLTextBox to work with the updated libOMV
2011-07-23 11:39:32 +01:00
504de8bc47
Pass the first name and last name from the agent circuit data to the authorization service rather than from the account.
...
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517 , this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
2011-07-23 03:48:53 +01:00
4eaca4884e
Fixed serverside_object_permission default value confliction
2011-07-23 02:26:13 +01:00
be9b4ad23a
For default everyone permissions on library items, make notecards and scripts non-modifiable (but still copyable, etc).
...
Users should not be given the impression that they can modify these items.
This still does not solve the issue where library items cannot be dragged into prims or user inventory any time after they are initially seen.
Curiously, manually copying and pasting still appears to work.
On the surface, this seems to have something to do with library item caching on the client, since deleting the cache allows drag to work again once
Not sure what the exact problem is.
2011-07-23 02:18:23 +01:00
f0895028e9
Remove manually permissions settings on all current library items so that they use the defaults instead.
...
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
2011-07-23 02:13:11 +01:00
fcaa4f6012
Revert "Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default)."
...
There actually are uses for this. I will correct the perms instead since some entries appear to be wrong.
This reverts commit 667b54f5a2
2011-07-23 02:05:51 +01:00
667b54f5a2
Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default).
...
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
2011-07-23 01:59:14 +01:00
869883f2dc
BulletSim: fix buoyancy for prims. Start of configurable physics parameters.
2011-07-22 15:23:57 -07:00
aadc4eb3b8
Fix problem where sculpts were not getting physical proxies
...
Fixed this by inspecting Shape.SculptEntry at various places instead of Shape.SculptType. Sculpties actually have a SculptType of Cylinder - only true mesh is SculptType.Mesh
This addresses http://opensimulator.org/mantis/view.php?id=5595
2011-07-22 19:23:38 +01:00
5ffec1cd64
Pass collisions and updates in pinned memory (saves marshaling).
...
Fix folding feet by using collision normals.
Add constraint specification.
2011-07-22 10:23:40 -07:00
4cbc912375
Merge branch 'master' into bulletsim
2011-07-22 09:02:32 -07:00
705f70064e
Fix merge artefact
2011-07-22 12:38:08 +01:00
0e52010c0e
Thank you, Michelle Argus, for a patch that adds reading the agent limit
...
from XML properly.
2011-07-22 12:36:49 +01:00
6ac0bc7259
Thank you, Michelle Argus, for a patch that adds reading the agent limit
...
from XML properly.
2011-07-22 12:36:05 +01:00
02e54c57c4
Generate the initial maptile asynchronously
...
Signed-off-by: Melanie <melanie@t-data.com>
2011-07-22 09:52:21 +01:00
d8228f4374
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-07-21 21:12:50 +01:00
71ef4a8fb3
When an uncached asset is requested multiple times concurrently, only load it once
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:52:56 +01:00
56830bfe07
When handling SetAppearance packet, always save the appearance; not only if the texture was changed
2011-07-21 20:18:36 +01:00
f97278610c
Fixed updating avatar appearance
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:13:32 +01:00
2c11f7fc38
Merge branch 'master' into bulletsim
2011-07-20 15:01:32 -07:00
3270bd560e
Removed unused AddPrimShape methods in PhysicsScene caused by merge conflicts
2011-07-20 14:34:02 -07:00
9fc7d65df7
Apply the localID to the Physics actor to prevent null calls later
2011-07-19 18:26:36 +01:00
51c47677a1
Tidy up a superfluous AddPrimShape override in PhysicsScene
2011-07-19 18:17:19 +01:00
cbaa4aa88f
Tidy up a superfluous AddPrimShape override in PhysicsScene
2011-07-19 18:16:44 +01:00
c768d18c92
Revert "Tidy up a superfluous AddPrimShape override in PhysicsScene"
...
This reverts commit f5623b5c39
2011-07-19 18:16:36 +01:00
f5623b5c39
Tidy up a superfluous AddPrimShape override in PhysicsScene
2011-07-19 10:15:34 -07:00
ee829a71c2
On all undo/redo operations, consistently lock the undo object for everything, in order to avoid any deadlock issues.
2011-07-19 06:13:05 +01:00
c50533659a
If we store an undo, wipe anything already present on the redo stack
...
This stops problems when we undo a few steps and start off down another path.
Surprisingly, apart from this now fixed problem, redo appears to be working too.
2011-07-19 06:11:16 +01:00
ec1ecd3633
stop redo throwing an exception if there is nothing to redo
2011-07-19 06:05:23 +01:00
25c532f2ec
refator: simplify UndoState.Compare() code
2011-07-19 05:58:52 +01:00
9dd5a24495
rip out pointless null checks in UndoState where part can never be null
2011-07-19 05:51:19 +01:00
bc3679b67d
Fix undo when changing just the root prim's position in a linkset.
...
I think (ha ha) this largely fixes undo, except for the fact that rotation a set of prims with 'edit linked parts' selected doesn't quite work properly (though this works fine if the checkbox isn't selected).
Also, the double undo bug for resize is still present.
Redo might be incredibly buggy, haven't even looked at that yet.
2011-07-19 05:46:17 +01:00
0ef29da9b2
refactor: rename UpdatePrimPosition() to UpdatePrimGroupPosition() for consistency
2011-07-19 05:20:04 +01:00
62325829ec
comment out all kinds of debugging guff
2011-07-19 05:14:58 +01:00
1fdb16f1cd
Fix undo for rotation of the root prim in a linkset on its own.
...
The only obviously broken things right now are the undo of the position of just a root prim (stays in place) and the fact that resizes need two undoes.
2011-07-19 05:05:50 +01:00
b2722e984a
Fix undo of rotation of single prims in a linkset
2011-07-19 04:40:02 +01:00
97f1edfd95
Fix undo of prim group rotation.
...
This isn't that great since I think I broke it a few commits earlier.
Undo of rotation of individual prims in a linkset is still broken
2011-07-19 04:15:27 +01:00
4b9ef4f39c
Rename UpdatePrimRotation() to UpdatePrimGroupRotation() since this is what it actually does and is more consistent with other method names.
2011-07-19 03:44:49 +01:00
7c468cda36
Stop undo of just the root prim position in the linkset from shifting the whole linkset.
...
However, what happens now is that undo just doesn't do anything when the root prim is selected on its own. This requires more code than just fiddling with undo states.
2011-07-19 03:38:22 +01:00
c94dc95844
fix undo when resizing of non-root individual prims in a linkset
...
undo resize, rotation and position still needs fixing when only editing root prim of a linkset
2011-07-19 03:27:16 +01:00
430a4aeba8
Fix undo for resizing linksets
...
This involves implementing a boolean in UndoState to signal whether the undo needs to be done for an entire group/linkset or just a single prim
Resizing individual components of linksets is still dodgy.
Resizing still has to be down twice, since for some reason the client is sending two multiobjectupdate packets on every resize except the very first. This applies to single prims and linksets. Need to look into this.
2011-07-19 03:01:54 +01:00
86f45f6fe7
remove undo state storage in a few places where it's pointless
...
no functional effect - existing bugs still remain
2011-07-19 01:24:43 +01:00
6fc74b36d1
Make various tweaks to undo code in an effort to get things working better.
...
Undo rotation and position appear to be working.
Resizing a single prim appears to be working, though the undo has to be done twice.
Resizing a group of prims still does not work properly - possibly because in the UndoState we don't store a knowledge of when we're resizing a whole group rather than individual prims.
This needs to be addressed.
2011-07-18 04:54:21 +01:00
aec3b58a57
use standard sdk stack in terrain model rather than OpenSim.Framework.UndoStack.
...
remove OpenSim.Framework.UndoStack
2011-07-18 02:06:06 +01:00
3f8e571b78
Use a standard generic system stack for the undo/redo stacks instead of our own homebrew.
...
system stack also uses an array, so no performance penalty.
Also exposes undo count and adds a test assertion for correct undo count after resize
2011-07-18 02:01:12 +01:00
bdd340b9fc
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-07-18 01:35:00 +01:00
e9a739f45f
refactor: group all the undo/redo code in SOP into one place for easier code reading
2011-07-18 01:33:57 +01:00
dd2564d7ec
refactor: Pull up Assembly of the SQLite classes as a protected property, so that it can be overwritten in subclasses. That way extensions can decide in which assembly migration resources should be looked up. This is a refactor similar to commit 9923a2ff10 for MySQL -- no functional changes.
2011-07-16 09:49:38 +02:00
f5ddf37112
Replace ifs in SOG.GroupResize() with Math.Min()
...
Also fiddle a bit with undo. This is not currently working properly, though to be fair it also didn't appear to work in 0.7.1.1 either (at least for resize).
Will get some more attention soon.
2011-07-16 05:23:21 +01:00
9a80adf33a
remove now unncessary parts of SceneObjectGroup.Resize()
2011-07-16 04:49:21 +01:00
122745fe1c
refactor: replace scale limiting code with more elegant Math.Min calls
2011-07-16 04:28:49 +01:00
2b68ac4ba3
refactor: Push all part resize code down into SceneObjectPart.Resize()
2011-07-16 04:22:57 +01:00
4b5a6b655b
add test for resizing one part in a group
2011-07-16 03:52:30 +01:00
df2a59d31b
refactor: make SceneObjectGroup.GroupScale() a property rather than a mehod
2011-07-16 03:30:14 +01:00
0f9882db5b
minor: add a log warning if a sculpt/mesh async asset request returns no data
2011-07-16 03:24:36 +01:00
6f9b855719
refactor: remove pointless sender != null tests, etc, in AssetReceived, since the method called always belongs to the object that generated the request
2011-07-16 03:16:24 +01:00
982e71b6b8
eliminate unused and redundant SceneObjectGroup.AssetReceived()
2011-07-16 03:08:28 +01:00
c82f19e41c
fix build break from last commit
2011-07-16 03:06:30 +01:00
3fc12e7224
Eliminate the pointless textured id argument to SculptTextureCallback
2011-07-16 03:02:28 +01:00
2b339b7d2b
minor: remove mono compiler warnings
2011-07-16 02:56:54 +01:00
27fae36a21
remove the need to supply SceneObjectGroup.GroupResize() with a localId.
...
This is utterly pointless scene we already know which sog we're dealing with.
2011-07-16 02:53:36 +01:00
50bd48542c
Add very basic test for resizing a scene object with one prim
2011-07-16 02:44:00 +01:00
6179879308
minor: remove mono compiler warnings
2011-07-16 01:53:25 +01:00
da7340b9fb
If resized shape is a mesh/sculpt, leave it to the mesh asset callback to trigger the physics actor taint.
...
In the last commit, the fix was made by updating all the child prim physics actors with the new size rather than just the root part.
2011-07-16 01:42:56 +01:00
18652eb87e
Fix physics proxy regeneration when a mesh with more than one submesh is resized
...
Addresses http://opensimulator.org/mantis/view.php?id=5584
2011-07-16 01:36:27 +01:00
7247ca1644
use constants in llGetObjectDetails() rather than magic numbers
2011-07-16 00:08:11 +01:00
a9ba9d4a9e
change async parameter name in AddLocalPacketHandler since it becomes a reserved keyword in .net 5
...
Also adds some method doc.
2011-07-15 23:51:55 +01:00
0ee7a5ee81
If object is an attachment, make llGetVel() return the avatar's speed rather than the object's own zero speed.
...
As per http://opensimulator.org/mantis/view.php?id=5575
2011-07-15 23:36:32 +01:00
3e5b2d52ff
minor: method doc for baked texture uploading
2011-07-15 22:58:29 +01:00
b5fcd2caba
Fix some local id issues in physics glue
2011-07-15 20:11:12 +01:00
e9dbe54ab1
Fix some local id issues in physics glue
2011-07-15 20:07:59 +01:00
b55076990c
fix duplication of physical objects for physics engines that care about the initial value of localID
2011-07-15 11:37:34 -07:00
c7dbd7cbd0
Fox some local id issues in physics glue
2011-07-15 19:36:00 +02:00
8dff9d564d
Revert "Add localid support to ch0de properly"
...
This reverts commit bb402d0d95
2011-07-15 19:35:49 +02:00
8925fb5537
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-07-15 19:30:23 +02:00
bb402d0d95
Add localid support to ch0de properly
2011-07-15 12:08:40 -07:00
cc69d12d54
Fix a raycast issue
2011-07-15 11:12:10 -07:00
7fac07d9ab
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-07-15 18:48:43 +02:00
c7e8529122
minor: remove whitespace
2011-07-13 01:25:17 +01:00
0d64155bb5
Remove an unused 404 checker since on a 404, GetResponse() throws a WebException rather than proceeding.
2011-07-13 01:24:22 +01:00
938b4f8bf8
if a SynchronousRestObjectRequester request fails, then unless it's due to a 404, log the exception for diagnostic purposes
...
This is instead of logging "Invalid XML" for all failures, even if they weren't a result of invalid xml.
A default TReponse is returned in the event of a 404, which is the same behaviour as previously.
2011-07-13 01:19:12 +01:00
e434ba5e8e
Remove the obsoleted SynchronousRestObjectPoster
2011-07-13 00:52:32 +01:00
08dc07dc76
refactor: Move all callers of the obsoleted SychronousRestObjectPoster.BeginPostObject() to the identical SynchronousRestObjectRequester.MakeRequest()
2011-07-13 00:48:36 +01:00
5158ec0913
Add experimental module to check status of services that the simulator is connected to.
...
Currently disabled.
2011-07-13 00:24:55 +01:00
bf1b8397bb
Add a warning to URI config in GridCommon.ini.example not to add a slash to the end.
...
Tidy up GridCommon.ini.example
2011-07-12 23:35:06 +01:00
3e456163dd
Port implementation of llCastRay() from Aurora.
...
I haven't been able to test this since the viewer won't parse the llCastRay() function. Maybe some activation cap is missing. Could wait until it is activated by default in the viewer.
2011-07-12 22:13:15 +01:00
d31e0a67f7
temporarily fix the build break with building the OdePlugin tests assembly.
...
This needs to be fixed properly.
2011-07-12 03:26:22 +01:00
f75f906e35
minor: remove whitespace to trigger another build
2011-07-12 03:13:05 +01:00
df0e5cc9fe
When a mesh object is added to a scene, delay adding the physics actor until the sculpt data has been added to the shape (possibly via an async asset service request)
...
This prevents spurious 'no asset data' for meshes added on startup.
2011-07-12 02:33:09 +01:00
dbd954d701
Fix permissions problem where newly uploaded meshes rezzed from inventory could not be copied by owner.
2011-07-11 22:56:14 +01:00
b9cbe92f30
Merge branch 'master' into bulletsim
2011-07-11 12:23:20 -07:00
24efb021ff
minor Tack the prim name on the end of the "experimental mesh proxy generation" message.
...
Can probably comment out this message soon, once a few other issues are tidied up.
2011-07-11 04:23:30 +01:00
8e44a8e2b9
Properly regenerate physics proxy when a mesh is resized.
...
This is done in SOP.Resize(). More common code from callers needs to be refactored into this method to reduce confusing copy/pasting
2011-07-11 03:47:49 +01:00
0badf3718d
refactor: push the part of SceneObjectGroup.CheckSculptAndLoad() that actually deals with the part into a SceneObjectPart.CheckSculptAndLoad() method
2011-07-11 03:35:29 +01:00
2f3d0e209f
When a sculpt/mesh texture is received by a part on a callback request, don't do the unnecessary work of copying the base shape.
...
Just setting the new base shape is enough to reinsert the sculpt data and set the taint.
Also cleans up a few more left-in debugging messages.
2011-07-11 03:13:59 +01:00
ce85675e70
comment out accidential ProcessTaints physics debug line left in code
2011-07-11 02:29:51 +01:00
6a15464b0a
refactor: Make arguments to SceneGraph.UpdatePrimFlags() more readable
2011-07-11 02:29:19 +01:00
01b98c2e62
refactor: Make arguments for SceneObjectGroup.UpdatePrimFlags() more readable
2011-07-11 02:18:19 +01:00
e68ae44b6b
minor: remove mono compiler warning
2011-07-11 02:11:37 +01:00
c6d4304a04
refactor: very minor space insertion
2011-07-11 02:11:16 +01:00
c964114f7e
refactor: make argument to SOP.UpdatePrimFlags() more readable
2011-07-11 02:09:11 +01:00
b59b1ff3d9
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-07-10 18:16:09 +02:00
9c9b3e3976
Dammit, loggin the type of an exception without providing the FULL DUMP is NOT
...
going to help squash bugs!
2011-07-10 17:27:20 +02:00
457ba9d1a2
refactor: slightly simplify test
2011-07-09 02:27:47 +01:00
59aedbc94b
Rename SceneSetupHelpers.AddRootAgent to AddClient() to better represent its effects and return object
2011-07-09 02:25:40 +01:00
f99b89990c
Add scratch AvatarFactoryModuleTests with one test to do a partial check on AvatarFactoryModule.SetAppearance()
...
Baked texture set not yet checked, nor persistence of data in avatar service
This is a foundation for later npc related tests.
2011-07-09 02:21:56 +01:00
6963b8b046
refactor: Get LSLString(LSLInteger i) constructor to now call LSLString(int i) structure to remove code duplication.
2011-07-09 01:28:27 +01:00
df586c9d25
Raw int numbers (ex.LSL Constants) are displayed like "1.000000" when type cast to string
2011-07-09 01:27:12 +01:00
f680c13495
Fix osMatchString() so that it reports all instance of pattern matches, not just the first one.
...
This is a slight adaptation of the patch in http://opensimulator.org/mantis/view.php?id=4568 which doesn't apply directly since the underlying code was changed by earlier makopoppo patches.
Thanks makopoppo!
2011-07-09 01:24:30 +01:00
52c3671aa0
fix formatting issues from last patch
2011-07-09 01:17:35 +01:00
b983f38e2a
lsGetWindlightScene() returns raw int value, which makes unable to compare to another value with llListFindList()
2011-07-09 01:08:26 +01:00
04f8d0e45d
Made some LSL_Constant or LS_Constant raw int values
2011-07-09 01:08:13 +01:00
c920ff9d1d
Merge branch 'master' into careminster-presence-refactor
2011-07-09 01:06:46 +01:00
e7abf834d1
Instance-types-in-list fix for LSL/OSSL functions. This will fix llListFindList() which always returns -1 when you compare with the list from those functions.
...
*llCSV2List
*llGetAnimationList
*llGetLinkPrimitiveParams
*llGetObjectDetails
*llGetParcelDetails
*llGetParcelPrimOwners
*llGetPrimitiveParams
*GetLinkPrimitiveParamsEx
*osGetAgents
*osMatchString
*osGetLinkPrimitiveParams
*osGetPrimitiveParams
*osGetAvatarList
2011-07-09 00:49:53 +01:00
d79c6c8820
Rename SetSculptData() to SetSculptProperties(), since this is what it does (setting SculptData is done through the property)
2011-07-09 00:42:48 +01:00
5e8900dfd0
minor: code tidy and inserted log lines for future use.
...
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does
After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory
When phantom is toggled, the sculptdata is regenerated before remeshing.
But on resize, the sculptdata is not regenerated.
So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
2011-07-09 00:35:30 +01:00
c3d82bdcb1
When loading library asset set, only store an asset if it's different from an existing one with the same id.
...
We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store.
This cuts asset library load time from 10 seconds to <1 sec.
Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear.
This is unrelated to this commit and needs to be fixed at some subsequent time.
2011-07-08 22:53:19 +01:00
a048ec3f95
stop the local inventory services connector from logging an error when an item id isn't found.
...
making this query is legitimate and so the log line can cause false positivies. It is up to callers to log an error if appropriate.
2011-07-08 22:34:03 +01:00
192bd1057e
fix bug where opening a library script would fail
2011-07-08 22:32:19 +01:00
5700c582ba
refactor: rename bool returning GetAgentInventoryItem() to CanGetAgentInventoryItem() to improve code readability
2011-07-08 22:28:17 +01:00
e8ad8593b6
refactor: eliminate redundant return statement
2011-07-08 20:58:44 +01:00
40300c886c
refactor: Factor out AddSubMesh() method from long CraeteMeshFromPrimMesher() method
...
Also remove some of the logging spam left in from the last commit.
2011-07-08 20:36:01 +01:00
b18ef976ff
Fix interpretation of physics mesh proxies from mesh data
...
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format , some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
2011-07-08 19:43:22 +01:00
29034bc0e0
minor: code tidy up - remove a couple of Console.WriteLine() accidentally added in the last commit
2011-07-08 18:34:44 +01:00
36df9ae79a
refactor: Separate the OdeScene class into its own file from OdePlugin.cs, to improve code readability
2011-07-08 18:16:48 +01:00
1dcad4ac66
minor: commented out log lines for future use and very small code tidy
2011-07-08 17:58:01 +01:00
3bda7711b3
Switch the MeshUploadFlag CAP module on and off with the existing config AllowMeshUpload flag in [Mesh] (in OpenSimDefaults.ini)
...
Default is on.
2011-07-07 23:49:19 +01:00
2fbc98fa5c
Make MeshUploadFlagModule non-shared rather than shared (since each scene needs its own cap)
2011-07-07 23:37:23 +01:00
e91861fff2
Ensure that the max transfer distance is initialized correctly.
2011-07-07 09:12:57 -07:00
281e80ccf3
add MeshUploadFlag capability fixed mesh upload with latest mesh viewer thank you dahlia and lkalif for helping to make this happen!
2011-07-07 03:30:37 -07:00
fedfa02b64
Remove another core SNAFU. AbsolutePosition is NOT equal to group position
...
in attachments! Breaks resizers!!!
2011-07-06 21:20:11 +02:00
06d5989f4d
Fix parcel prim count and max reporting. Viewer already multiplies.
2011-07-06 09:59:05 +02:00
f45746613d
Revert "If a user has the rights to edit a parcel's properties, then also allow them always to enter that parcel."
...
This reverts commit b8e7258051
2011-07-05 04:02:16 +01:00
47cf9c8fe0
Merge branch 'master' into careminster-presence-refactor
2011-07-05 04:01:59 +01:00
719e0702be
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-07-05 03:13:39 +02:00
30482e7ae5
Don't store the default WL profile. This will prevent "valid" from being
...
set on the default profile and hopefully finally fix day and night
2011-07-05 03:11:56 +02:00
d2fc23c034
Stop displaying "Sending windowslig profile to client" when WL is disabled
...
or there is no valid WL for that region.
2011-07-05 03:08:36 +02:00
af8773d6d0
Add TestClearCache()
2011-07-04 23:05:31 +01:00
cb02fc44f5
add TestExpireAsset()
2011-07-04 23:03:05 +01:00
f58de55c84
refactor: Move test setup code into setup method
2011-07-04 22:59:36 +01:00
bebc51a6e0
Make it possible to disable the file part of the flotsam asset cache
...
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
2011-07-04 22:51:47 +01:00
5dc785bbf2
refactor: Split file cache manipulation code into separate methods, as has already been done for the memory cache
2011-07-04 22:30:18 +01:00
46f5893d55
Add basic flotsam asset cache test for retrieved cached asset.
...
Disabled temporarily since file system caching disrupts subsequent test runs
2011-07-04 21:35:15 +01:00
b8e7258051
If a user has the rights to edit a parcel's properties, then also allow them always to enter that parcel.
...
This is patch http://opensimulator.org/mantis/view.php?id=5567
Thanks Snoopy!
2011-07-02 01:14:29 +01:00
bb4cb16512
Add profile, merge, noassets and skip-assets options for loading/saving oars via RemoteAdmin
...
This is http://opensimulator.org/mantis/view.php?id=5453
Thanks Michelle Argus!
2011-07-02 01:05:03 +01:00
513d63455e
Create a very basic initial test which just creates an 'npc' and tests that the scene presence exists
2011-07-02 01:01:40 +01:00
ed12e38480
refactor: simplify existing npc code by creating them directly rather than indirectly via a timer
...
no obvious reason for doing this asynchonously, especially as the caller was sleeping in order to pick up the response anyway!
2011-07-02 00:18:15 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
e765759f50
If OpenSim has been built from a git tree, then include version information automatically by dereferencing .git/HEAD
...
A blank bin/.version file will stop this being displayed.
2011-07-01 22:48:00 +01:00
759e855566
refactor: rename gitCommitFileName to manualVersionFileName since bin/.version doesn't necessary have to be a git hash
2011-07-01 21:47:30 +01:00
e41093635a
fix build break I just introduced
2011-07-01 21:37:03 +01:00
9f72fbcb75
Add an async inventory details sender to respond to FetchInventory packets.
...
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
2011-07-01 21:25:40 +01:00
5c18ebf424
Allow physics proxy generation for meshes using new asset format.
...
Fix an invalid cast exception while decoding new mesh asset format.
2011-06-29 17:36:41 -07:00
5f927dc104
Merge branch 'master' into careminster-presence-refactor
2011-06-30 00:26:03 +01:00
c84a1bd99f
Don't follow inventory links of links.
...
This is to avoid problems with corrupt inventories where an inventory link target points back at the source's folder
No viewer has been observed to set these up as of yet. If this ever happens, we will need a more sophisticated solution to track sent folders within the recursion
2011-06-29 01:33:41 +01:00
1b4c08730e
refactor: simplify redundant double containing folder check
2011-06-29 00:56:35 +01:00
3f0b8db0c1
If an inventory link target is in the same folder as the source, then don't recursively request that folder.
...
Currently, this should never actually happen but certainly best to handle this case
2011-06-29 00:54:53 +01:00
22f25fae38
Hack around with the NPC module to get osNpcCreate() partially working again.
...
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
2011-06-29 00:28:22 +01:00
ee92f22f2a
[PATCH 2/2] [FIX] osGetPrimitiveParams() and osSetPrimitiveParams()
...
crashes throwing System.NullReferenceException
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:29 -04:00
80010f8908
[PATCH] osSetSpeed() will accept float number
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
ffa790d69d
[PATCH] Get osGetWindParam() and osSetWindParam() accessible
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
882d5c82b3
[PATCH 1/2] Fixed the function names of some OSSL functions shown as
...
threat-level check error message
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
36e2054760
minor: temporarily comment out the local status notify friends messages seen on login/logout, since it's a bit noisy on the console.
...
Please uncomment if/when this is still needed.
2011-06-27 23:12:54 +01:00
5daac0584a
Fix bug in reset user password where entering an invalid name would cause an exception. Also, convert this commands log output to console output.
...
Console output is more appropriate for console commands. The log only gets one side of the conversation anyway (since it doesn't necessarily record command inputs).
2011-06-25 00:08:14 +01:00
296774495b
Implement "set user level" console command to set the user level (which determines whether a user has a god account)
...
Adapted from Makopoppo's patch in http://opensimulator.org/mantis/view.php?id=5552 . Thanks!
2011-06-25 00:03:34 +01:00
56dcc51094
Add a command "show account <first-name> <last-Name>" to the user account service that will show the given user details
2011-06-24 23:54:37 +01:00
7545692f32
Changed actual default values of 'ServiceConnectorModule' and 'MessagingModule' in [Groups] section in accordance with OpenSim.ini.example descriptions
2011-06-24 22:40:21 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
afb1248e39
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-24 21:57:16 +01:00
1a0a9d2290
Implement the latest mesh mechanism so that rezzing the uploaded mesh now works again.
...
Many thanks to the aurora project for pioneering this.
This code is almost certainly not bug free, but it does at least appear to handle simple meshes (except when the viewer crashes - but it is beta!).
2011-06-24 21:54:01 +01:00
1cad116b1d
Merge branch 'master' of /home/opensim/src/opensim
2011-06-24 16:33:40 -04:00
75199a0d2c
RegionReady Module:
...
Add notification to neighbors when logins are enabled.
2011-06-24 16:20:13 -04:00
37a7c16734
minor: method documentation
2011-06-24 21:01:48 +01:00
de20f0603f
Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
...
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
302d72701d
BulletSim initial checkin
2011-06-20 17:24:42 -07:00
1b7fec0842
Remove friends debug spam
2011-06-20 03:20:32 +02:00
f4f55c4d6b
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-06-20 03:08:56 +02:00
6ae73aea49
Merge branch 'master' into careminster-presence-refactor
2011-06-20 03:11:34 +01:00
163ee82168
Add some flags to control content in search better
2011-06-20 02:29:09 +02:00
7819b4a794
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-16 17:15:12 -07:00
409738726d
Added a couple of guards and warnings to the MapImage/MapImageServiceModule.
2011-06-16 17:14:41 -07:00
ad84728aba
Add localID to physical object creation functions.
2011-06-15 11:31:32 -07:00
29da57e380
Add the PhysActor to the correct SOP when duplicating a physical
...
prim. Thanks, MisterBlue
2011-06-15 11:26:45 -07:00
7a4fbdac7c
Added an expiring cache for region information to the
...
RemoteGridService connector. Timeout is currently set at five
minutes. Negative results are not cached.
The result is that operations like send an instant message do
not have to go through the grid service every time.
2011-06-15 11:22:51 -07:00
603dbea190
tweak messages. Make verbose inventory item save message give the item name as well as item id and asset id
2011-06-14 00:51:18 +01:00
822b9e085f
Added SimulatorFeatures capability. Thanks Aurora devs for the bootstrap on the contents of the response.
...
Changed the experimental capability introduced a couple of commits ago: now sending that extra information as part of the response in the SimulatorFeatures cap.
2011-06-13 10:21:29 -07:00
c62ccc75a1
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-13 09:14:17 -07:00
ecb28ae130
V2 map now working in grids too. WARNING: A few visible configuration variables added in order for this to work. See .ini.example changes
2011-06-13 09:13:44 -07:00
ab11835aeb
Same processing of the "/" in the MapImageService Cap as the one in the login service.
2011-06-13 07:59:28 -07:00
0e4db3ca39
Added experimental new capability URL called MapImageService meant to work with Kokua viewer if devs are willing to do it.
2011-06-13 07:56:52 -07:00
9b1d3f0c38
Merge branch 'master' into careminster-presence-refactor
2011-06-13 12:38:17 +01:00
dc978d02a7
match water color for warp3d map tiler and adjust lighting
2011-06-13 12:37:43 +01:00
4b9de140ab
Add credit and link to SimianGrid project. Thanks, guys!
2011-06-12 22:25:30 -07:00
95e050130c
People are bound to forget the '/' at the end of MapTileURL, so let's correct that from the inside.
2011-06-12 22:10:16 -07:00
2e77518c6d
bit depth: 24!!! begeez! -- zoom levels work now.
2011-06-12 21:51:26 -07:00
78c16da544
A few bug fixes on map V2. Zoom level weirdness still there.
2011-06-12 17:05:45 -07:00
fd57c91b4a
First pass at making the V2 map work. Standalones only for now. There are some issues with the zoom level -- TBD.
2011-06-12 15:37:42 -07:00
06e254c392
A few more cleanups on the way to close http://opensimulator.org/mantis/view.php?id=5516 once and for all. Moral of the story: don't send AgentOnline/Offline to viewers with a zero-length array.
2011-06-11 17:48:19 -07:00
e1ca77a0db
Only send AgentOnline to the client if the friendsOnline list has elements. Also, increased the timeout on UserAgentServiceConnector, StatusNotification again.
2011-06-11 17:22:35 -07:00
d992779397
Switched order of SQL statements in Friends migration -- resulted in the wrong key
2011-06-11 09:36:57 -07:00
a1c16a4200
Merge branch 'master' into careminster-presence-refactor
2011-06-11 12:08:02 +01:00
e07d71d298
Added a Sleep in between each site call, to slow the xml-rpc requests down.
2011-06-10 21:17:34 -07:00
5f311c91c7
More tweaking on the UserAgentServiceConnector: add constructor that does not do DNS lookup, and use that for friends notification.
2011-06-10 21:07:50 -07:00
0ae022d688
Decreased timeout of HG StatusNotification to 4secs. http://opensimulator.org/mantis/view.php?id=5516
2011-06-10 20:59:57 -07:00
487cb51f69
3rd way of reseting the HG Map. This time, don't use the grid service; instead keep track of which map blocks each client has seen in the region, and reset exactly those when the client closes.
2011-06-10 17:22:17 -07:00
9a62bfab0e
If the flotsam asset cache console command "fcache clear" is specified on its own, clear both memory and file caches
2011-06-11 00:50:20 +01:00
b13b54c526
Make the internal flotsam asset cache defaults match config-include/FlotsamCache.ini.example. Enable the flotsam console commands even if FlotsamCache.ini isn't present.
...
For the most part, defaults are made to match those already in FlotsamCache.ini.example.
The one exception is that the 48 hour file timeout from the code is used instead of the 0 hours that was in the example file. This can be tweaked if necessary.
Most importantly, the default cache directory is now ./assetcache (as in FlotsamCache.ini.example) rather than ./FlotsamAssetCache (as was the internal code default).
Therefore, if you were using flotasm without using the config file, then please rename your cache directory or start using the ini file and change the default there if you want to keep using your existing cache.
2011-06-11 00:04:21 +01:00
fc7e17baf7
When serializing objects, stop accidentally using the green text colour value for alpha
...
This addresses http://opensimulator.org/mantis/view.php?id=5111
2011-06-10 21:49:25 +01:00
c7bdb66a1f
Added missing "Old Guids=true" to ConnectionString
2011-06-10 21:10:37 +01:00
804fe2d9b0
Save the sun's position in OARs
2011-06-10 20:55:58 +01:00
08db3c5a8e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 20:42:15 +01:00
b5518dc906
minor: Add some commented out destructor logging messages for potential future use.
...
At the moment, client and scene objects are being garbage collected as expected, at least in simple scenarios.
2011-06-10 20:40:14 +01:00
eeac2275c9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 09:17:06 -07:00
98d1e7768a
New method for resetting the map on HG: do it only once upon changing grids, and reset only exactly the map blocks that had regions in them. WARNING: this fetches all the regions from the Grid service, so there is a chance that this is a really bad idea in large grids. Pushing it for testing.
2011-06-10 09:16:43 -07:00
387b228d68
partial update for new mesh asset format - handle both old and new formats for physics mesh
2011-06-10 00:38:38 -07:00
9149ef6c89
For MySQL, migrate region tables to the MyISAM storage engine rather than InnoDB
...
Using MyISAM proves vastly faster for persisting scene objects.
For instance, a scene object that took 9 seconds to persist before now takes 1. This also improves the experience of loading large OARs.
We don't use any of the transactional features of InnoDB.
The only thing that may have an impact is that InnoDB does row locking on inserts while MyISAM does table locking.
However, field reports say there is no noticeable difference.
2011-06-10 02:33:50 +01:00
d780500c58
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 02:29:30 +01:00
2bc8dcfdbd
minor: add method doc to make it clear that click action is fired when the click action is changed, not when a prim is clicked
2011-06-10 02:27:45 +01:00
8d3a8a0a81
The map breakage is actually at 2048!
2011-06-09 16:51:47 -07:00
e3e1f6308d
Change the name of the newest command to "show names" so that it doesn't conflict with the existing "show users"
2011-06-09 16:11:47 -07:00
4cf60c5d9d
Removing special casing on failures. This may also fix reports of this issue:
...
22:07:53 - [USER AGENT CONNECTOR]: remote call to http://hg.osgrid.org:80/ returned an error: Requested method [locate_user] from 127.0.0.1 threw exception: Object reference not set to an instance of an object at OpenSim.Services.HypergridService.UserAgentService.LocateUser (UUID userID) [0x00000] in <filename unknown>:0
2011-06-08 19:51:48 -07:00
326c46ba70
Merge branch 'master' into careminster-presence-refactor
2011-06-09 02:05:04 +01:00
49e4e53928
Consistency fix on the last commit.
2011-06-08 16:41:58 -07:00
2a46f756d6
Fixed a compilation problem. Also added a lengthy comment on the Map hack, so that it never goes unnoticed again.
2011-06-08 16:38:25 -07:00
1bd712c541
Reverting the [HG]MapModule to its buggy behavior above 4096. Ppl seem to prefer the color blue, and I have given up trying to make things work above 4096.
...
Revert "Improved reuse on the WorldMap/WorldMapModule.cs"
This reverts commit d473d9975e
2011-06-08 16:12:47 -07:00
80fc607d75
Fixed "Unknown User" listed as creator/owner on prims created with the Build button by foreign visitors. Added command to the UserManagementModule to list all the known bindings between user UUIDs and their names: show user-names.
2011-06-08 16:01:33 -07:00
9759b2a4bb
Added EventManager.OnPrimsLoaded, an event that modules can hook up onto so that they know when the scene's objects have been loaded from the DB.
2011-06-08 15:18:14 -07:00
90f657d77d
Deleted wrong debug message.
2011-06-08 13:45:38 -07:00
61f1c2b2c5
Write estate errors on startup to the log
2011-06-07 20:20:04 -07:00
39323055bd
When a plugin fails to load because a DLL is missing, log which DLL it is
2011-06-07 20:17:49 -07:00
eabfc9ca15
Added error message to help understand http://opensimulator.org/mantis/view.php?id=5527
2011-06-07 20:05:24 -07:00
3307db5d4a
This hopefully fixes all issues with online/offline notifications across grids. http://opensimulator.org/mantis/view.php?id=5528
2011-06-07 19:36:04 -07:00
02b40670be
This makes the display names work better for foreigners
2011-06-07 12:10:57 -07:00
41627bdf8a
Remove scary error message
2011-06-07 12:09:32 -07:00
f5d82350bb
This fixes the crash reported in http://opensimulator.org/mantis/view.php?id=5529 related to sending IMs to foreign friends who are offline. Hopefully.
2011-06-07 10:51:12 -07:00
1a23d322ac
More on the hunt for the slow down on HGFriendsModule. - Don't requests the online friends on foreign grids. If this works, there's another way of getting that info.
2011-06-06 19:52:50 -07:00
dce0e46eaa
Moved the Mono Addins declaration of the HGFriendsModule to where the one for FriendModule is -- CoreModulePlugin.addin.xml (trying to hunt down the slowness reported by Nebadon related to HGFriends)
2011-06-06 18:20:02 -07:00
e77ca65e57
This should make offline IMs work again. It should work for incoming foreign IMs where the local recipient is offline. I can't test any of this, because I don't run an offline IM server.
2011-06-06 17:46:34 -07:00
6861606b6d
Narrow down the exception catching to exactly the exception of interest. This may decrease the time of processing prims with broken user data.
2011-06-05 19:46:29 -07:00
a41051f1dd
Make the last otem in a list created with llCSV2List findable
2011-06-05 17:08:21 +02:00
205b2f7ea4
Remove the unmaintained 'CMS' framework, which was really a 'source-control' experiment from 2008.
...
This hasn't been touched for about 2 years and I haven't being using it. If this is wrong then please let me know.
2011-06-04 03:01:52 +01:00
fe471b6424
Extend TestGiveInventoryFolder() to test giving back the freshly received folder
2011-06-04 02:44:53 +01:00
12b1cbf8bf
Fix give inventory tests to use different users rather than (accidentally) the same user. Extend TestGiveInventoryItem() to test giving back the same item.
2011-06-04 02:39:26 +01:00
fe890554fb
insert an InventoryArchiveUtils.FindItemsByPath() to return multiple items rather than just the first one
2011-06-04 01:37:01 +01:00
896f039513
create TestGetInventoryItem()
2011-06-04 00:51:49 +01:00
1543fd7fff
extend TestGiveInventoryFolder() to check for the receipt by user 2
2011-06-04 00:20:54 +01:00
66004a9375
If an llSensor() is in an attachment, make the detection cone face in the direction of the avatar, not the relative rotation of the attachment towards the avatar.
...
This is effectively a copy/paste from 459323a
2011-06-03 23:43:09 +01:00
d09210da86
minor: add in method print out to new test
2011-06-03 23:15:31 +01:00
527e10a04e
add stub UserInventoryTests.GiveInventoryFolder(). Not yet complete
2011-06-03 23:13:05 +01:00
cf86ba5559
Added prefix HG to the name of the landmark item in inventory, as a soft reminder that the landmark belongs to a place in another grid. People can change the name, but that's their decision.
2011-06-03 11:48:24 -07:00
623706d988
HG Landmarks bug fix: pull landmark asset data from user's asset server when user is traveling.
2011-06-03 11:33:44 -07:00
fde3e704d3
oops
2011-06-03 10:50:55 -07:00
e33cedfd42
HG Landmarks now working.
2011-06-03 10:26:58 -07:00
995b893e4c
HG Landmarks being created. WARNING: new config var under [HGInventoryAccessModule], Gatekeeper.
2011-06-03 09:04:34 -07:00
76c60f1f99
Moved CreateNewInventoryItem to the InventoryAccessModule in preparation for supporting HG landmarks.
2011-06-03 08:27:01 -07:00
2a12d143c2
HG IM: increase the timeout value
2011-06-02 10:44:10 -07:00
6312eea459
HG IM bug fix: grid_instant_message was being placed in the default port instead of the specified one.
2011-06-02 10:14:26 -07:00
458a8c6d0b
Persist Buoyancy in inventory
2011-06-02 18:44:51 +02:00
65c71050cc
Extra debug message
2011-06-02 09:39:29 -07:00
3c15c0b264
Added test IM client.
2011-06-02 09:39:09 -07:00
61bf2bf2dd
Make Buoyancy a prim property
2011-06-02 18:32:25 +02:00
4696a9c95e
Bug fix on HG IM.
2011-06-02 08:13:54 -07:00
f2f30a7890
HG Friends bug fix: connector was shrinking principalID to UUID.
2011-06-02 07:26:40 -07:00
c13acdf5a1
This is the better solution: make the combined key be only on the first 36 characters of each field -- that's the UUIDs. Thanks coyled. WARNING: Again, people who have gone through this migration and failed need to run it manually.
2011-06-01 20:19:22 -07:00
43ecc46a22
It looks like there's a better solution for that problem.
...
Revert "Changed Friends table to have 165-sized varchars on PrincipalID and FriendID. The reason for this number is the following: there is a combined key of these 2 fields; apparently MySql can't handle keys larger than 1000 bytes; when the table is created with utf8 encoding, this combined key is bigger than 1000 bytes, and the migration fails. WARNING: this is not a new migration! People who have gone through this migration and failed should update the sizes of these fields manually."
This reverts commit 3fa54a156a
2011-06-01 20:09:59 -07:00
3fa54a156a
Changed Friends table to have 165-sized varchars on PrincipalID and FriendID. The reason for this number is the following: there is a combined key of these 2 fields; apparently MySql can't handle keys larger than 1000 bytes; when the table is created with utf8 encoding, this combined key is bigger than 1000 bytes, and the migration fails. WARNING: this is not a new migration! People who have gone through this migration and failed should update the sizes of these fields manually.
2011-06-01 20:02:26 -07:00
46cdd442a8
[Profiles] --> [Profile]
2011-06-01 18:18:31 -07:00
777f57d946
Re-Apply Use current TravelingAgent if the the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady""
...
This reverts commit 0a430bbffb
2011-06-01 18:47:06 -04:00
0a430bbffb
Revert "Use current TravelingAgent if the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady"
...
This reverts commit 4b9e446c62
2011-06-01 18:10:56 -04:00
ac4d080aaf
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-01 17:01:40 -04:00
984b801dd9
Merge branch 'master' of /home/opensim/src/opensim
2011-06-01 17:01:08 -04:00
4b9e446c62
Use current TravelingAgent if the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady
2011-06-01 16:57:01 -04:00
b0ed0e63dc
Adding boolean alias for commandline switches like -save_crashes=yes
2011-06-01 21:14:16 +01:00
54096db30b
Fix: The command line switches 'save_crashes' and 'crash_dir' haven't actually worked
2011-06-01 21:06:43 +01:00
5fb0455e92
Updates to MSSQL to most recent compatibility, also included Windlight support. Needs plenty of testing but clean install and migration from 0.6.9 have been tested and work, a few indexes still need to be added for performance.
2011-06-01 21:01:04 +01:00
a3e0895f12
a few minor formatting tweaks
2011-06-01 20:55:03 +01:00
c43ad8a0e7
A final couple of tweaks to GroupsModule.cs. Remove unneeded delegate, and prettify codeing style/formatting
2011-06-01 20:51:52 +01:00
8bacf56e46
revert the prematurely included groups patch, yet again
2011-06-01 20:51:38 +01:00
929bdba346
Merge branch 'master' of /home/opensim/src/opensim
2011-06-01 13:47:38 -04:00
aed6e74080
Add alternate region handling for url based logins as found in login to "home" or "last"
2011-06-01 13:44:20 -04:00
5711ada5c9
Fix dumb sql mistake in MSSQLGenericTableHandler.Delete()
2011-05-31 22:42:18 +01:00
c67fa72d56
When sending an LLUDP MoneyBalanceReply message, fill out the transaction item description even though there is none.
...
This is to deal with a problem in libomv where calling ToBytes() without this crashes because of an ItemDescription.Lnegth dereference.
2011-05-31 19:57:08 +01:00
8129e64e2a
Fill in the new OwnerData field in the LLUDP ScriptDialog message.
...
If we don't do this then viewer 2.8 crashes.
Resolves http://opensimulator.org/mantis/view.php?id=5510
2011-05-31 19:25:01 +01:00
392d270264
revert the patch that accidentally got added in the last commit
2011-05-31 18:49:38 +01:00
c4b265aeae
update libomv libraries to 0.9.0
...
this is a prerequisite to fixing llDialog issues for the latest Linden viewers, since they are now making use of a new OwnerData field in the ScriptDialog message
2011-05-31 18:47:13 +01:00
44371118a2
Made GetMapImage public in the Hyperlinker
2011-05-30 20:23:45 -07:00
b81a304baa
Made the GatekeeperConnector a public property.
2011-05-30 20:12:05 -07:00
e14b7ec9e1
HGWorldMap: don't send map blocks of hyperlinks that are farther than 4096 cells from the current region.
2011-05-30 17:19:46 -07:00
d473d9975e
Improved reuse on the WorldMap/WorldMapModule.cs
2011-05-30 17:15:55 -07:00
5cb7d8bc71
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-28 13:52:27 -07:00
d5326197ac
Fixed an issue with the response of CreateAgent over the SimulationConnector.
2011-05-28 13:52:06 -07:00
3326e417b4
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 16:21:30 -04:00
c7e18f9017
Adding an event to signal that logins are enabled
...
Added an event to signal the eabling of logins and added an alert to send to a configured service.
2011-05-28 16:20:10 -04:00
d2c2a4301b
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 00:39:21 -04:00
99f42c0a6e
Add option to disable logins
...
This just covers script loading for now. More to come.
2011-05-28 00:35:06 -04:00
6f4a2685cf
minor: remove mono compiler warning
2011-05-27 23:43:31 +01:00
28cd03cda5
fix bug where generic sqlite table delete wasn't working.
...
this would have caused dupe links bugs when using the sqlite adaptor
2011-05-27 22:54:59 +01:00
b0c9696de0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-27 21:21:01 +01:00
e9988a3728
Make sure culture is en-US when saving archive related xml.
...
This might resolve http://opensimulator.org/mantis/view.php?id=5475
2011-05-27 21:19:20 +01:00
fcef4688a8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-27 13:07:39 -07:00
76525be7b2
HG lures working! Friends can offer friends HG teleports via the profile. WARNING: additional configuration for HG inis -- see *Common.ini.example
2011-05-27 13:07:18 -07:00
4e4db749eb
If parsing fails in the primitive base shape (which prints out a debug log message), also print out the name and uuid of the part containing this shape.
...
This is to help in diagnosing parsing failures.
2011-05-27 20:59:35 +01:00
0af5bb239f
When saving an iar, don't chase down link asset IDs (since these points to other items rather than real assets)
...
This bug had no practical effect other than to make "save iar" misreport the number of missing assets
2011-05-27 19:39:03 +01:00
4087a453dc
Avoid a scary warning message about null replies from the user agent service.
2011-05-27 08:53:26 -07:00
d60f525baa
HG inventory transfers over the profile working.
2011-05-27 08:19:40 -07:00
36f9d55c36
Added a BasicProfilemodule so that the profile-based actions (like give inventory, etc) work. This is just a mock profile, the same for all users, and with no DB backend behind it -- meaning that nothing will be saved. For serious profiles, use 3rd party implementations.
2011-05-27 07:00:36 -07:00
0d29f73916
Commented a few extra debug messages.
2011-05-26 19:13:03 -07:00
f02fbdbc68
Merge branch 'master' into careminster-presence-refactor
2011-05-27 01:10:02 +01:00
b17afe43c4
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-26 15:52:34 -07:00
0c58a9e680
HG IM in grid mode working fairly well. Unknown target user references looked back in source user's User Agent service.
2011-05-26 10:04:48 -07:00
3e54aad76c
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-05-26 16:29:45 +02:00
4d324f1b74
Change setter on changed flags to public so modules can reset it
2011-05-26 16:29:00 +02:00
03525959c9
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-05-26 03:42:45 -07:00
b000d9ba72
Some additional protection, it seems that responsedata needs to be locked, but I can't immediately see where it's being accessed from another thread. For now, this will protect the server
2011-05-26 03:42:01 -07:00
91ec1a572a
improve help information for "appearance show"
...
at the moment, this just performs a baked avatar check for everybody in the region. If the check returns 'corrupt' then a baked texture is missing and other avatars will continue to see the gas ball.
2011-05-26 02:48:47 +01:00
3270f4353e
Add --noassets option for "save iar"
...
Like "save oar", this saves an iar without assets
This can be useful for backup when you know the required assets will still be present (e.g. you're backing up the assets db separately).
This also bumps the iar format version to 0.3 and 1.2 respectively.
0.3 is backward compatible with previous opensim versions
1.2 is used if the --profile switch is specified. It is only compatible with 0.7.1 presently.
2011-05-26 02:22:52 +01:00
c7e46e8a51
Bump OAR file format version up to 0.7 for this development cycle.
...
This adds a <assets_included>true|false</assets_included> element to the oar control file, though this is not used on reloading at this time.
This addition is backward compatible with previous opensim releases
2011-05-26 01:37:15 +01:00
ab855e6f8d
fix bug where outfit folder links could not be deleted
2011-05-26 01:32:36 +01:00
d9889ae2e7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-26 01:28:48 +01:00
6f4d079fc5
Add a --noassets option to "save oar".
...
This switch stops any assets being saved in the oar.
This can be useful if you're using OAR to backup regions and you know you'll always have the original asset database available.
2011-05-26 01:27:01 +01:00
587b17e23b
HG: Renamed, shuffled some interfaces around. Move them all to IHypergridServices.
2011-05-25 12:37:37 -07:00
5c2168cae7
HG: Instant Message working. Tested on HG standalones only. Needs a lot more testing.
2011-05-25 12:32:21 -07:00
e398c33648
Add PayPrice to serialization format Xml2
2011-05-25 12:17:46 +01:00
932db1c374
Add PayPrice to serialization format Xml2
2011-05-25 11:30:21 +02:00
ef3f6b4e63
Revert "Make client event handlers for money only work on root agents"
...
This reverts commit a8913141c0
2011-05-24 16:33:51 -04:00
a8913141c0
Make client event handlers for money only work on root agents
2011-05-24 16:07:48 -04:00
e19031849e
Added necessary code to drop inventory on hg friends using the profile window, but can't test because this mechanism doesn't seem to work without a profile service.
2011-05-24 09:38:03 -07:00
28c25d8477
Allow disabling the legacy backup mechanism to avoid the object clone if
...
backup is not used.
2011-05-24 04:03:51 +01:00
24f28d3534
HG friends: Status notifications working. Also initial logins get the online friends in other grids.
2011-05-23 19:45:39 -07:00
61d4291da5
Create a method to force the script engine to save state from outside
2011-05-24 03:17:12 +01:00
62e0c96036
Allow disabling the legacy backup mechanism to avoid the object clone if
...
backup is not used.
2011-05-24 03:37:25 +02:00
d5841e07c2
Create a method to force the script engine to save state from outside
2011-05-24 02:40:59 +02:00
178d541dca
Add an event for an orderly region shutdown that fires once per region before
...
the SceneGraph is torn down.
2011-05-24 01:19:48 +01:00
8b42f824d3
Add an event for an orderly region shutdown that fires once per region before
...
the SceneGraph is torn down.
2011-05-24 00:53:28 +02:00
b9fb7cdf9f
Merge branch 'master' into careminster-presence-refactor
2011-05-23 03:39:20 +01:00
24c00acedc
Fix Mantis #4429 : Allow llGiveInventory to work across sim borders.
2011-05-23 02:52:28 +01:00
336665e035
More on HG Friends. Added Delete(string, string) across the board. Added security to friendship identifiers so that they can safely be deleted across worlds. Had to change Get(string) to use LIKE because the secret in the identifier is not always known -- affects only HG visitors. BOTTOM LINE SO FAR: HG friendships established and deleted safely across grids, local rights working but not (yet?) being transmitted back.
2011-05-22 16:51:03 -07:00
fed3cc630e
File to be removed
2011-05-22 15:35:40 -07:00
9c1f799582
Implement llGodLikeRezObject and llGetUsedMemory
2011-05-22 21:01:31 +02:00
dc95e38e42
Add stubs for unimplemented lsl functions
2011-05-22 14:59:18 -04:00
89705b19c7
Merge branch 'careminster-presence-refactor' of ssh://3dhosting.de/var/git/careminster into careminster-presence-refactor
2011-05-22 20:00:59 +02:00
be1996f121
Merge branch 'master' into careminster-presence-refactor
2011-05-22 20:23:25 +01:00
58c53c41de
Fixed permissions bug related to friends in PermissionsModule. Added FriendsData[] GetFriends(string principalID) to IFriendsData and FriendInfo[] GetFriends(string PrincipalID) to IFriendsService. Refactored some more in the FriendsModule. Made client get notification of local friends permissions upon HGLogin. HG Friends object permissions work.
2011-05-21 16:48:00 -07:00
80457111e0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-21 14:07:30 -07:00
bb9b317f15
Get rid of OpenSim.Tests.Common.Setup subpackage in favour of just OpenSim.Tests.Common instead
2011-05-21 01:05:20 +01:00
4073f10133
rename test helpers enclosing package from Setup to Helpers
2011-05-21 00:51:34 +01:00
94553d4753
rename UserInventoryTestsUtils -> UserInventoryHelpers for consistency
2011-05-21 00:48:01 +01:00
156cc1418b
test helper rename for consistency
2011-05-21 00:44:58 +01:00
d7e5b76d73
refactor: rename AddSceneObjectItem to AddSceneObject
2011-05-21 00:39:42 +01:00
084059319c
refactor: move scene object item creation code into TaskInventoryHelpers
2011-05-21 00:37:20 +01:00
9103fe84d5
move test task inventory notecard item creation into a new TastInventoryHelpers class
2011-05-21 00:25:58 +01:00
Justin Clark-Casey (justincc)