This was because the parts in scene objects were sometimes not serialized in link order.
This is perfectly fine since the parts still have the right link numbers, but an extra fix to adjust for this
had not been done in the SerialiserModule methods that OAR loading used.
Add regression test for same.
Addresses http://opensimulator.org/mantis/view.php?id=5948, http://opensimulator.org/mantis/view.php?id=5749
Will use one of three selected methods to route avatar landing
points when using Telehubs. The setting is in [Startup] using
SpawnPointRouting = closest/random/sequence
closest: The default setting. Routes avatar to the nearest SpawnPoint
to the location.
random: Picks random SpawnPoints to land the avatar.
sequence: Follows a sequence to place the avatar on the next available
SpawnPoint location
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
DuplicateObject() relies on source object having correct link numbers for the duration of the dupe.
Both link and delink can change link numbers such that they are not consistent for short periods of time.
Viewers 1 and 3 are fine with doing this immediately. However, Imprudence has a small delay (<200ms, >500ms) after receiving the AgentCompleteMovement reply packet on the destination region before regarding that region as the currnet region.
If Imprudence receives a DisableSimulator in this period, it quits.
We are not restoring the full 5000ms delay since this brings back a bug where teleports permanently fail if an avatar tries to teleport back too quickly.
This commit also sends the AgentCompleteMovement packet to the client before telling the source region to release its old agent, in order to further cut down any possibility of the DisableSimulator being recieved before the AgentMovementComplete.
This adds a non-advertised wait_for_callback option in [EntityTransfer]. Default is always true.
Teleport tests disable the wait for callback from the destination region in order to run within a single thread.
This happened because the scripts were notified about control changes (e.g., the user stopped pressing the Forward key) when the animation was still WALK, so the script didn't stop the walking animation. Fixing this required: a) Update the movement animation *before* notifying the script; b) Add locking to prevent clashes with the Heartbeat thread (which also updates the animations); c) Handle the case of a user who stops walking just as the avatar is in the air: the avatar should STAND in that case, not WALK.
This reverts commit feef1dd732.
This involves a large amount of change in test scene setup code to allow test scenes to share shared modules
SetupScene is now an instance method that requires an instantiation of SceneHelpers, though other SceneHelpers methods are still static
May split these out into separate classes in the future.
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
These are identical apart from setting Velocity = zero, which has no practical effect anyway since this is zeroed when the avatar is added back to the physics scene.
This was an oversight when removing some race conditions from PhysicsActor setting recently.
Regression tests extended to probe this code path.
Extending regression tests required implementation of a BasicPhysicsPrim (there was none before). However, BasicPhysics plugin is still of no current practical use other than to fill in as a component for other parts of regression testing.
On region restart, the whole object would become physical as expected.
Observed behaviour from elsewhere is that all prims in a new linkset should take on the status of the root prim.
Add regression test for this behaviour.
storage (dictionaries and arrays of string values) for scripts and region modules.
In addition, there are operations on the storage that enable "real" distributed
computation between scripts through operations similar to those of a tuple space.
Scripts can share task queues, implement shared locks or semaphores, etc.
The structured store is limited to the current region and is not currently
persisted. However, script operations are defined to initialize a store from a notecard
and to serialize the store to a notecard.
Documentation will be posted to the opensim wiki soon.
This makes it consistent with other parts of OpenSimulator that are treating ESTATE_MANAGER and ESTATE_OWNER as different entities.
As per opensim-dev mailing list.
Another thread could come and turn off physics for a part (null PhysicsActor) at any point.
Had to turn off localCopy on warp3D CoreModules section in prebuild.xml since on current nant this copies all DLLs in bin/ which can be a very large number with compiled DLLs
No obvious reason for doing that copy - nothing else does it.
Rename IFriendsModule.GetFriendPerms() -> GetRightsGrantedByFriend() to be more self-documenting and consistent with friends module terminology.
Add some method doc.
This adds ScenePresence to IClientAPI.SceneAgent earlier on in the add client process so that its information is available to EventManager.OnNewClient() and OnClientLogin()
Also add a code comment as to why we're caching friend information for child agents.
We need to cache child agents so that friends object edit/delete permissions will work across boarders on regions hosted by different simulators.
This reverts commit d9f7b8549b.
This allows us to avoid unnecessary multiple calls to the friends service.
All friends functions originate from the root agent and only go to other root agents in existing code.
This also allows us to eliminate complex ref counting.
On osgrid and other places, I have observed that manually sending appearance updates from the console often relieves grey avatar syndrome.
Despite hunting high and low, I haven't been able to find where this packet is sometimes being lost - it might be a persistent viewer bug for all I know.
Therefore, this experimental setting resends appearance data for everybody in the scene every 60 seconds. These packets are small and the viewer only fetches texture
data if it doesn't already have it.
Default is false.
The idea is to make the critical main scene loop as skinny as possible - it doesn't need to run things that aren't time critical and don't depend on update ordering.
This will be done gradually over time to try and uncover any issues. Many non-criticial scene loop activities are being launched on separate threadpool threads anyway.
This may also allow modules to register their own maintenance jobs without having to maintain their own timers and threads.
Currently the maintenance loop runs once a second, as opposed to the 89ms scene loop.
This lets us remove the dependency of OpenSim.Framework.dll on data/avataranimations.xml, which is not necessary for ROBUST.
This commit also takes care of the odd situation where animations are stored and used internally with uppercase names (e.g. "STAND")
but scripts refer to them with lowercase names (e.g. "sit").
Update() now accepts a frames parameter which can control the number of frames updated.
-1 will update until shutdown.
The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
The previous lines-per-second measurement used for top scripts report was inaccurate, since lines executed does not reflect time taken to execute.
Also, every fetch of the report would reset all the numbers limiting its usefulness and we weren't even guaranteed to see the top 100.
The actual measurement value should be script execution time per frame but XEngine does not work this way.
Therefore, we use actual script execution time scaled by the measurement period and an idealised frame time.
This is still not ideal but gives reasonable results and allows scripts to be compared.
This commit moves script execution time calculations from SceneGraph into IScriptModule implementations.
from region modules. The LSL translator is extended to generate the
modInvoke format of commands for directly inlined function calls.
A region module can register a function Test() with the name "Test".
LSL code can call that function as "Test()". The compiler will translate
that invocation into modInvoke("Test", ...)
The first llDie() could lock Scene.m_deleting_scene_object.
The second llDie() would then wait at this lock.
The first llDie() would go on to remove the second script but always abort it since the second script's WorkItem would not go away.
Easiest solution here is to remove the m_deleting_scene_object since it's no longer justified - we no longer lock m_parts but take a copy instead.
This also requires an adjustment in XEngine.OnRemoveScript not to use instance.ObjectID instead when firing the OnObjectRemoved event.
However, it looks like we should retain SP.ParentID since it's much easier to use that in places where another thread could change ParentPart to null.
Otherwise one has to clumsily put ParentPart in a reference, etc. to avoid a race.
This is to deal with the hundred lines of command splurge when one previously typed "help"
Modelled somewhat on the mysql console
One can still type help <command> to get per command help at any point.
Categories capitalized to avoid conflict with the all-lowercase commands (except for commander system, as of yet).
Does not affect command parsing or any other aspects of the console apart from the help system.
Backwards compatible with existing modules.
We can now do this since the entire scene and all objects within it are now successfully gc'd at the end of these tests.
This greatly improves the time taken to run each test (by reducing teardown time, not the time to actually do the test work that we're interested in).
Slightly simplifies config read in Scene constructor to help facilitate this.
OnNewScript fires when a script is added to a scene
OnRezScript fires when the script actually runs (i.e. after permission checks, state retrieval, etc.)
This allows scripts to run in child prims that are outside region boundaries.
This is an interim patch applied from http://opensimulator.org/mantis/view.php?id=5899 though it does not resolve that bug
Thanks tglion!
On the first frame, all startup scene objects are added to the physics scene.
This can cause a considerable delay, so we don't start raising the alarm on scene loop timeouts until the second frame.
This commit also slightly changes the behaviour of timeout reporting.
Previously, a report was made for the very first timed out thread, ignoring all others until the next watchdog check.
Instead, we now report every timed out thread, though we still only do this once no matter how long the timeout.
This involves
1) On forcible teleport, call m_scene.RequestTeleportLocation() rather than ScenePresence.Teleport() - only EntityTransferModule now should call SP.Teleport()
2) When avatar is being forcibly moved due to banlines, use a 'stop movement' tolerance of 0.2 to requested position rather than 1
This prevents the avatar sometimes being stuck to banlines until they teleport somewhere else.
This aims to fix some problems in http://opensimulator.org/mantis/view.php?id=5822
potential bad update that places an object at the opposite side of the
origin sim for a moment before actually crossing it. Especially important in
grids like OSG where lag between sims is high.
This fixes the problem by fixing the permissions module to look at root part permissions rather than having to do this for every caller.
Resolves http://opensimulator.org/mantis/view.php?id=5569
At least on mono 2.6.4, running GC.Collect() is not guaranteed to force gc of all objects when run in the same method where those objects had references.
Therefore, GC.Collect() is now being done in the per-script teardown of ObjectTortureTests.
In addition, scene loop update is being run after garbage collection in order to clean out the viewer update list of scene objects in the SceneGraph.
These measures mean that scene objects/parts are now garbage collected after a test run if deleted from the scene, resulting in a much better memory usage report (though probably still not very accurate).
However, deletion takes a very long time - what's really needed is to find out now why the entire scene isn't being GC'd by this measure.
This change hasn't yet been applied to the other stress tests.
Logging level was DEBUG before 312e145 (Fri Feb 3 2012).
312e145 also accidentally removed the 'general error' log message if any shape deserialization failed.
This commit restores it, though this has no functional impact.
Setting PermissionMask.All will cause next permissions to replace current permissions when the object is rezzed, since bit 4 will be set.
This is not correct behaviour for a freshly uploaded mesh. Freshly rezzed in-world prims also do not have bit 4 set (don't yet know exactly what this is).
Should resolve http://opensimulator.org/mantis/view.php?id=5651
This illustrates that references to Scene, SOG, etc. are not currently being released when a stress test ends (or at regression test end in general).
This means even the current stress tests take much more memory than they need, a problem that will have to be addressed.
The Path.GetDirectoryName call in Compiler.CompileFromDotNetText is unnecessary since AppDomain.CurrentDomain.BaseDirectory is always a directory.
Later path concatenation is already done by Path.Combine() which handles any trailing slash.
Removing Path.GetDirectoryName() will not affect the runtime but allows NUnit to work since it doesn't add a trailing slash to AppDomain.CurrentDomain.BaseDirectory.
This resolves the recent regression from deeb728 where notecards could not be saved in prim inventories.
This looks like a better solution than deeb728 since only non-caps updates pass in a transaction ID.
Hopefully resolves http://opensimulator.org/mantis/view.php?id=5873
These can be run using the "nant torture" target. They are not part of "nant test" due to their long-run future nature.
Such tests are designed to do some testing of extreme situations and give some feedback on memory usage, etc.
However, data can be inconsistent due to different machine circumstances and virtual machine actions.
This area is under development.
Viewers since at least Linden Lab 1.23 use the script upload capability to save script changes.
It's unknown whether the commented out code was working for very old viewers or not.
Code is commented out to reduce complexity and so that useful error messages don't need to be removed.
If there is a substantial population using extremely old viewers that can't upgrade to a newer version 1 viewer (e.g. 1.23) or similar TPV then this can be revisited.
This allows NPCs to be sensed as agents by LSL sensors rather than as a specific NPC type (which is currently an OpenSimulator-only extension).
Wiki doc on this and other recent NPC functions will follow soon
llGetOwnerKey() could also be extended but this does not allow one to distinguish between an unowned NPC and some other result (e.g. 'no such object' if NULL_KEY is the return.
Also, any future extensions to LSL functions by Linden Lab are unpredictable and OpenSim-specific extensions could clash.
Doing this in every script is unnecessary since the event trigger is parameterized by the item id.
All that would happen is 2000 scripts would trigger 1999 unnecessary calls, and a large number of initialized scripts may eventually trigger a StackOverflowException.
Registration moved to UrlModule so that the handler is registered for all script engine implementations.
This required moving the OnScriptRemoved and OnObjectRemoved events (only used by UrlModule in core) from IScriptEngine to IScriptModule to avoid circular references.
Add configuration option - DEBUG to enable debugging methods. This is temporary for helping users testing teleport routing be able to report back the data with the test cases. We can remove when finished with this, or leave it if it proves to be useful.
Users: set DEBUG = true in OpenSim.ini to get more information from teleport routing. The default is false. It presently prints the TeleportFlags value.
Switch to our TeleportFlags enum instead of LibOMV because we need to define a type for HG Logins. Also moved some debugging in ScenePresence into a function to make it simpler to enable/disable.
Incoming HG owner/estate manager, etc. is routed according to the rules defined for teleports within the local grid. Left some commented debugging code inside so we can test other cases. Will remove when tings are settled in.
Update basic profile to use the replaceable interface, making configuration less error-prone. Add support to query avatar's home user account and profile service for regions usng the updated OpenProfileModule with Hypergrid.
This is a nasty situation. The map tile UUID is, in principle, stored authoritatively in RegionSettings. However, it also needs to be stored in the Grid Service because that's how other sims can retrieve it to send it in Map Blocks to non-V3 viewers. So every time the tile image changes, that change needs to propagate to the Grid Service, and this is done via RegisterRegion (ugh!). Interestingly, this problem didn't affect grids because by default AllowRemoteDelete is false, so the prior images aren't being deleted from the asset servers -- but they were not being correctly updated in the map either, the map was stuck with old images.
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
The viewer warns in the log if it receives this.
Stopping this doesn't appear to have adverse effects on viewer 1 or viewer 3 - the viewer gets its own appearance from body parts/clothes and self-baked textures.
Further filters "debug packet <level>" to exclused [Request]ObjectPropertiesFamily if level is below 25.
Adjust some method doc
Minor changes to some logging messages.
There were two problems here:
1) On object group update, we looked for the group is the IClientAPI group cache rather than in the groups service. This fails to groups created newly in that session
2) On object group update, we weren't setting the HasGroupChanged flag. This meant that the change was not persisted unless some other action set this flag.
This commit fixes these issues and hopefully addresses http://opensimulator.org/mantis/view.php?id=5588
This commit also moves HandleObjectGroupUpdate() to the GroupsModule from the Scene.PacketHandlers.cs file
Stop hiding RemoveAvatar failure, add log messages when characters are removed through defects or re-added unexpectedly.
Add commented out log lines for future use.
Use automatic property for PhysicsActor for better code readability and simplicity
This prints out both exception message and stacktrace (Exception.ToString()) isn't enough on Windows.
This also uses m_log.*Format() which is more efficient than string concat.
The only caller is the LLUDP stack and this has to validate the UDP circuit itself, so we know that it exists.
This allows us to eliminate another null check elsewhere and simplifies the method contract
This means that avatar/appearance data of other avatars and scene objects for a client will be sent after the ack rather than possibly before.
This may stop some avatars appearing grey on login.
This introduces a new OpenSim.Framework.ISceneAgent to accompany the existing OpenSim.Framework.ISceneObject and ISceneEntity
This allows IClientAPI to handle this as it can't reference OpenSim.Region.Framework.Interfaces
If sp becomes null right after we've checked or created it, then behaviour down the line is going to be wrong anyway.
So instead retain the check/create ScenePresence reference and use this.
It makes far more sense anyway to use TryGetRootScenePresence().Scene, in common with the rest of the code
This method could also return any scene for child or root agents, depending in which order the scenes happened to lie in the list
This is required for the substitution of different HTTP servers or the newer HttpServer.dll without having to commit to a particular implementation.
This is also required to write regression tests that involve the HTTP layer.
If you need to recompile, all you need to do is replace OSHttpRequest/OSHttpResponse references with IOSHttpRequest/IOSHttpResponse.
This required an option to be added to NullRegionData via ConnectionString for it to act as a non-static instance, so that regression tests (which only load this class once) don't get hopeless confused and complex to compensate.
Normal standalone operation unaffected.
This reverts to situation where animation updates are made each frame on SP.PhysicsCollisionUpdate (though a packet is only sent if the anim actually changes).
m_updateCount was not being update on various avatar state changes, causing the correct animations to never be sent.
Always setting in HandleAgentUpdate() is not enough since the avatar is continually sending AgentUpdate packets.
One would need to identify all the conditions under which animations need to play out and set m_updateCount appropriately in SP.HandleAgentUpdate()
Neither of these can have any effect on child agents
Now leaving warning about trying to set animation on a child agent active. Might temporarily pop up now and again.
This involves getting IScene.RequestModuleInterfaces() to return an empty array (as was stated in the method doc) rather than an array containing one null entry.
Callers adjusted to stop checking for the list reference being null (which never happened anyway)
These are just the result of an attempt to canonicalize received messages - it's not important that we constantly log them.
Also finally get the deregister grid service message working properly
Executing this asynchronously allows a race condition where subsequent friends fetches hit a cache that FetchFriendsList() had not yet populated.
Changing this to synchronous may improve issues where a user does not see friends as online even though they are.
I don't believe synchronous is a problem here, but if it is, then a more complicated signalling mechanism is required. Locking the cache isn't sufficient.
prim update to only triple queuing. Existing method was:
1. Schedule prim for update, adding to scene update list
2. Update on SOGs during heartbeat queues update onto each SceneViewer
3. Update on SPs during heartbeat queues update onto each IClientAPI
4. ProcessEntityUpdates queues updates into UDP send stack
Now the SceneViewer has been eliminated so updates are scheduled at any
time and then put onto the IClientAPI priority queues immediately during
SceneGraph.UpdateObjectGroups.
This is to avoid http://opensimulator.org/mantis/view.php?id=5783 when a collision with a ground sitting avatar causes that avatar to automatically stand and sometimes not be able to move
A better solution may be to keep gound sitting avatars solid but remove their collision status. However, this requires some physics code work.
This means that if the avatar is within 10 meters of the selected target, it sits on it immediately without walking.
Existing autopilot outside this range will be disabled in a later commit
BlueWall