XEngine listeners to EventManager.OnShutdown which is triggered from base.Close().
Possibly it could listen for the earlier OnSceneShuttingDown instead, but the easier solution right now is to relocate disposal of the physics scene.
This bug has existed since c150320 (Thu Jul 26 15:27:18 2012) and was in 0.7.4
I believe UseCircuitCode is sent on EnableSimulator EQ message, rather than EstablishAgentCommunication
At least with LL 3.3.4, EstablishAgentCommunication appears unnecessary in the teleport context -
viewer still requests it though possibly only after TeleportFinish(). However, we will continue to send it.
This controls how many undo steps the simulator will store for each prim.
Default is now 20 rather than 5 as it briefly was.
The default number could be increased through this is a memory tradeoff which will scale with the number of prims in the sim and level of activity.
This was present in the code but not enforced, which led to a memory leak over time as part properties were changed, whether by viewer, script or another source.
This commit enforces that limit, which will soon become configurable.
Regression test for undo limit added
Should help with http://opensimulator.org/mantis/view.php?id=6279
This resends appearance uuids to avatars in the scene once a minute.
I have seen this help in the past resolve grey appearance problems where viewers have for unknown reasons sometimes ignored the packet.
The overhead is very small since only the UUIDs are sent - the viewer then requests the texture only if it does not have it cached.
This setting will not help with cloudy avatars which are usually due to the viewer not uploading baked texture data or uploading something that isn't valid JPEG2000
Fix inconsistencies between configuration parameter names and their description names. Changing the configuration parameters for non physical prim size min-max from Nonphys* to NonPhys*.
Please update your OpenSim.ini and Regions.ini to reflect these changes.
This is to allow a second attempt to remove an avatar even if "show connections" shows them as already inactive (i.e. close has already been attempted once).
You should only attempt --force if a normal kick fails.
This is partly for diagnostics as we have seen some connections occasionally remain on lbsa plaza even if they are registered as inactive.
This is not a permanent solution and may not work anyway - the ultimate solution is to stop this problem from happening in the first place.
Add description and default of false (as before) to OpenSimDefaults.ini
If set to true, this config switch will resend avatar appearance information (a small amount of UUID data, not the baked textures themselves) to other avatars in the sim every 60 seconds.
For me, this has helped with situations where avatars appear persistently grey - the LL viewer sometimes did not appear to request assets the first time the appearance data was sent.
However, this switch will not help with other appearance failure situations (e.g. failure to bake assets).
This setting is experimental but will not have any significant impact on the simulator if turned to true.
themselves. For that, the physics module simply calls RequestAssetMethod, which
in turn points to Scene.PhysicsRequestAsset. This gives physics access to
the asset system without introducing unwanted knowledge of the scene class.
c150320 started explicitly disposing of the physics scene and nulling it out on region shutdown.
However, the update loop may not have yet checked Scene.ShuttingDown, particularly if avatars were not in the scene, causing failure when it tried to lookup time dilation.
This commit moves the setting of m_shuttingDown above the existing 500ms pause to notify avatars that they are being kicked.
This should not affect the few other places that use this flag.
This is fired when all regions are ready or when at least one region becomes not ready.
Recently added EventManager.OnRegionReady becomes OnRegionReadyStatusChange to match OnLoginsEnabledStatusChange
justincc's original work. Sample scripts before doing so. Also refactor some
crucial common code and eliminate parameters that were only ever used with
the same constant value.
justincc's original work. Sample scripts before doing so. Also refactor some
crucial common code and eliminate parameters that were only ever used with
the same constant value.
This replaces EventManager.OnLoginsEnabled which only fired when logins were first enabled
and was affected by a bug where it would never fire if the region started with logins disabled.
This saves listeners from having to re-retrieve the scene from their own lists, which won't work anyway if multiple regions with the same name have been allowed
Also changes separator from comma to bar to match existing [LoginService] config features.
Divergence of config names for identical facilities in different places makes for an unnecessarily confusing user experience.
This is to fix a regression starting from 5301648 where attachments had to start being deleted before persistence in order to avoid race conditions with hud update threads.
This is always done later on in SceneGraph.AddSceneObject() if the call hasn't failed due to sanity checks.
There's no other purpose for this method to exist and it's dangerous/pointless to call in other conditions.
If delete doesn't occur first then the update thread can outrace the IsAttachment = false necessary to save attachments and send hud artifacts to other viewers.
This is always done as part of Scene.RemoveClient()
Also refactors try/catching in Scene.RemoveClient() to log NREs instead of silently discarding, since these are useful symptoms of problems.
This is done by making the kick user command call IClientAPI.Close() rather than routing through Scene.IncomingCloseAgent(), which also called IClientAPI.Close()
DisableSimulator for child agents is moved from IncomingCloseAgent() to RemoveClient(), this is not a functional change since IncomingCloseAgent() always ends up calling RemoveClient()
If this is done before then on ODE agent update calls still incoming can fail as they try to use a raycastmanager that has been disposed.
Bullet plugin does nothing on Dispose()
However, I wouldn't be at all surprised if individual region restarting was buggy in lots of other areas.
If this is allowed, then the client usually gets forcibly logged out and data structures might be put into bad states.
To prevent this, the binary state machine of EMT.m_agentsInTransit is replaced with a 4 state machine (Preparing, Transferring, ReceivedAtDestination, CleaningUp).
This is necessary because the source region needs to know when the destination region has received the user but a teleport back cannot happen until the source region has cleaned up.
Tested on standalone, grid and with v1 and v3 clients.
This is to help relieve a race condition when an agent teleports then immediately attempts to teleport back before the source region has properly cleaned up/demoted the old ScenePresence.
This is rare in viewers but much more possible via scripting or region module.
However, more needs to be done since virtually all clean up happens after the transit flag is cleared .
Possibly need to add a 'cleaning up' state to in transit.
This change required making the EntityTransferModule and HGEntityTransferModule per-region rather than shared, in order to allow separate transit lists.
Changes were also required in LocalSimulationConnector.
Tested in standalone, grid and with local and remote region crossings with attachments.
This includes prim count, script count, avatar count, etc.
Information is currently the same as "show stats", though show stats can only show one scene at a time because it listens for the latest outgoing stats packet (a bad approach that needs to change).
Might be better to tie this module into the other stats module to display arbitrary stats rather than fetching directly from scene.SimStatsReporter.
Console command is "show scene" because "show region" already exists for the grid service, which is unfortunate.
Might need to make a distinction between "scene" relating to a live scene and "region" relating to more static region data (url, coords, etc.)
From sl docs such as http://community.secondlife.com/t5/English-Knowledge-Base/Managing-Private-Regions/ta-p/700115
agent should apply to avatars only.
This makes sense from a user perspective, and also from a code perspective since child agents with no physics or actions take up a fraction of root agent resources.
As such, the check is now only performed in Scene.QueryAccess() - cross and teleport check this before allowing an agent to translocate.
This also removes an off-by-one error that could occur in certain circumstances on teleport when a new child agent was double counted when a pre-teleport agent update was performed.
This does not affect an existing bug where limits or other QueryAccess() checks are not applied to avatars logging directly into a region.
Will use one of three selected methods to route avatar landing
points when using Telehubs. The setting is in [Startup] using
SpawnPointRouting = closest/random/sequence
closest: The default setting. Routes avatar to the nearest SpawnPoint
to the location.
random: Picks random SpawnPoints to land the avatar.
sequence: Follows a sequence to place the avatar on the next available
SpawnPoint location
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
This involves a large amount of change in test scene setup code to allow test scenes to share shared modules
SetupScene is now an instance method that requires an instantiation of SceneHelpers, though other SceneHelpers methods are still static
May split these out into separate classes in the future.
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
This was an oversight when removing some race conditions from PhysicsActor setting recently.
Regression tests extended to probe this code path.
Extending regression tests required implementation of a BasicPhysicsPrim (there was none before). However, BasicPhysics plugin is still of no current practical use other than to fill in as a component for other parts of regression testing.
Another thread could come and turn off physics for a part (null PhysicsActor) at any point.
Had to turn off localCopy on warp3D CoreModules section in prebuild.xml since on current nant this copies all DLLs in bin/ which can be a very large number with compiled DLLs
No obvious reason for doing that copy - nothing else does it.
This adds ScenePresence to IClientAPI.SceneAgent earlier on in the add client process so that its information is available to EventManager.OnNewClient() and OnClientLogin()
Also add a code comment as to why we're caching friend information for child agents.
We need to cache child agents so that friends object edit/delete permissions will work across boarders on regions hosted by different simulators.
This reverts commit d9f7b8549b.
This allows us to avoid unnecessary multiple calls to the friends service.
All friends functions originate from the root agent and only go to other root agents in existing code.
This also allows us to eliminate complex ref counting.
On osgrid and other places, I have observed that manually sending appearance updates from the console often relieves grey avatar syndrome.
Despite hunting high and low, I haven't been able to find where this packet is sometimes being lost - it might be a persistent viewer bug for all I know.
Therefore, this experimental setting resends appearance data for everybody in the scene every 60 seconds. These packets are small and the viewer only fetches texture
data if it doesn't already have it.
Default is false.
The idea is to make the critical main scene loop as skinny as possible - it doesn't need to run things that aren't time critical and don't depend on update ordering.
This will be done gradually over time to try and uncover any issues. Many non-criticial scene loop activities are being launched on separate threadpool threads anyway.
This may also allow modules to register their own maintenance jobs without having to maintain their own timers and threads.
Currently the maintenance loop runs once a second, as opposed to the 89ms scene loop.
Update() now accepts a frames parameter which can control the number of frames updated.
-1 will update until shutdown.
The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
The first llDie() could lock Scene.m_deleting_scene_object.
The second llDie() would then wait at this lock.
The first llDie() would go on to remove the second script but always abort it since the second script's WorkItem would not go away.
Easiest solution here is to remove the m_deleting_scene_object since it's no longer justified - we no longer lock m_parts but take a copy instead.
This also requires an adjustment in XEngine.OnRemoveScript not to use instance.ObjectID instead when firing the OnObjectRemoved event.
This is to deal with the hundred lines of command splurge when one previously typed "help"
Modelled somewhat on the mysql console
One can still type help <command> to get per command help at any point.
Categories capitalized to avoid conflict with the all-lowercase commands (except for commander system, as of yet).
Does not affect command parsing or any other aspects of the console apart from the help system.
Backwards compatible with existing modules.
We can now do this since the entire scene and all objects within it are now successfully gc'd at the end of these tests.
This greatly improves the time taken to run each test (by reducing teardown time, not the time to actually do the test work that we're interested in).
Slightly simplifies config read in Scene constructor to help facilitate this.
This allows scripts to run in child prims that are outside region boundaries.
This is an interim patch applied from http://opensimulator.org/mantis/view.php?id=5899 though it does not resolve that bug
Thanks tglion!
On the first frame, all startup scene objects are added to the physics scene.
This can cause a considerable delay, so we don't start raising the alarm on scene loop timeouts until the second frame.
This commit also slightly changes the behaviour of timeout reporting.
Previously, a report was made for the very first timed out thread, ignoring all others until the next watchdog check.
Instead, we now report every timed out thread, though we still only do this once no matter how long the timeout.
This involves
1) On forcible teleport, call m_scene.RequestTeleportLocation() rather than ScenePresence.Teleport() - only EntityTransferModule now should call SP.Teleport()
2) When avatar is being forcibly moved due to banlines, use a 'stop movement' tolerance of 0.2 to requested position rather than 1
This prevents the avatar sometimes being stuck to banlines until they teleport somewhere else.
This aims to fix some problems in http://opensimulator.org/mantis/view.php?id=5822
potential bad update that places an object at the opposite side of the
origin sim for a moment before actually crossing it. Especially important in
grids like OSG where lag between sims is high.
These can be run using the "nant torture" target. They are not part of "nant test" due to their long-run future nature.
Such tests are designed to do some testing of extreme situations and give some feedback on memory usage, etc.
However, data can be inconsistent due to different machine circumstances and virtual machine actions.
This area is under development.
Add configuration option - DEBUG to enable debugging methods. This is temporary for helping users testing teleport routing be able to report back the data with the test cases. We can remove when finished with this, or leave it if it proves to be useful.
Users: set DEBUG = true in OpenSim.ini to get more information from teleport routing. The default is false. It presently prints the TeleportFlags value.
Switch to our TeleportFlags enum instead of LibOMV because we need to define a type for HG Logins. Also moved some debugging in ScenePresence into a function to make it simpler to enable/disable.
This is a nasty situation. The map tile UUID is, in principle, stored authoritatively in RegionSettings. However, it also needs to be stored in the Grid Service because that's how other sims can retrieve it to send it in Map Blocks to non-V3 viewers. So every time the tile image changes, that change needs to propagate to the Grid Service, and this is done via RegisterRegion (ugh!). Interestingly, this problem didn't affect grids because by default AllowRemoteDelete is false, so the prior images aren't being deleted from the asset servers -- but they were not being correctly updated in the map either, the map was stuck with old images.
Naturally, default is true.
When set to false, "phantom" flags on prims can be set as usual but all prims remain phantom.
This setting is for test purposes.
This switch does not affect the collision of avatars with the terrain.
There were two problems here:
1) On object group update, we looked for the group is the IClientAPI group cache rather than in the groups service. This fails to groups created newly in that session
2) On object group update, we weren't setting the HasGroupChanged flag. This meant that the change was not persisted unless some other action set this flag.
This commit fixes these issues and hopefully addresses http://opensimulator.org/mantis/view.php?id=5588
This commit also moves HandleObjectGroupUpdate() to the GroupsModule from the Scene.PacketHandlers.cs file
This prints out both exception message and stacktrace (Exception.ToString()) isn't enough on Windows.
This also uses m_log.*Format() which is more efficient than string concat.
The only caller is the LLUDP stack and this has to validate the UDP circuit itself, so we know that it exists.
This allows us to eliminate another null check elsewhere and simplifies the method contract
This means that avatar/appearance data of other avatars and scene objects for a client will be sent after the ack rather than possibly before.
This may stop some avatars appearing grey on login.
This introduces a new OpenSim.Framework.ISceneAgent to accompany the existing OpenSim.Framework.ISceneObject and ISceneEntity
This allows IClientAPI to handle this as it can't reference OpenSim.Region.Framework.Interfaces
If sp becomes null right after we've checked or created it, then behaviour down the line is going to be wrong anyway.
So instead retain the check/create ScenePresence reference and use this.
prim update to only triple queuing. Existing method was:
1. Schedule prim for update, adding to scene update list
2. Update on SOGs during heartbeat queues update onto each SceneViewer
3. Update on SPs during heartbeat queues update onto each IClientAPI
4. ProcessEntityUpdates queues updates into UDP send stack
Now the SceneViewer has been eliminated so updates are scheduled at any
time and then put onto the IClientAPI priority queues immediately during
SceneGraph.UpdateObjectGroups.
from previous commit which sort out which iterator is used are left
intact. A discussion is needed as to what constitutes an avatar vs a
ScenePresence.
the 3 iteration functions so more of them are using the correct
iteration for the action they are performing. The 3 iterators that seem
to fit all actions within OpenSim at this time are:
ForEachAvatar: Perform an action on all avatars (root presences)
ForEachClient: Perform an action on all clients (root or child clients)
ForEachRootClient: Perform an action on all clients that have an avatar
There are still a dozen places or so calling the old
ForEachScenePresence that will take a little more refactoring to
eliminate.
SinceLastFrame was calculating the interval between any sleep that had occurred to pad out the frame time and the start of the next frame.
This would usually be below MinFrameTime but occasionally if the sleep was long it would be above, often due to the time required to update the watchdog.
This doesn't appear to play much practical role right now.
ODE was actually ignoring it entirely. Bullet might be helped slightly by receiving a non-varying value.
Settings are at bottom of [Startup] in OpenSimDefaults.ini, override in OpenSim.ini to change
Defaults are the same as previously.
More information to come on opensim-dev shortly.
Feel free to tweak but if you do please don't expect any support unless feedback on certain tweaks is explicitly requested.
ways to access the list/dictionary of child regions and locking was
inconsistent. There are now public properties which enforce locks.
Callers are no longer required to create new copies of lists.
Some of the places where agentMS was added were in separate threads launched by the update loop. I don't believe this is correct, since such threads are no longer contributing to frame time.
Some of the places were also driven by client input rather than the scene loop. I don't believe it's appropriate to add this kind of stuff to scene loop stats.
These changes hopefully have the nice affect of making the broken out frame stats actually add up to the total frame time
I thought that I had implemented this but must have accidentally removed it.
Adds a regression test to detect if this happens again.
Temporarily disables automatic landing of NPC at a target. Will be fixed presently.
Viewer 2 no longer contains the default avatar assets (i.e. "Ruth") that would appear if the user had insufficient body part/clothing entries.
Instead, avatars always appear as a cloud, which is a very bad experience for out-of-the-box OpenSim.
Default is currently off. My intention is to switch it on for standalone shortly.
This is not particularly flexible as "Ruth" is hardcoded, but this can change in the future, in co-ordination with the existing RemoteAdmin capabilities.
Need to fix creation of suitable entries for users created as estate owners on standalone.
Avatars still appear with spooky empty eyes, need to see if we can address this.
This commit adds a "Default Iris" to the library (thanks to Eirynne Sieyes from http://opensimulator.org/mantis/view.php?id=1461) which can be used.
As far as I can see, this is only invoked by a PUT request to ObjectHandlers, which is not being used anyway.
Invoking attachments code at this point is probably inappropriate since it would still be invoked when the client entered the scene.
Being commented to simplify analysis of attachments issues. Can be uncommented when in use.
Also, small tweak to lock and log removal of a SOG from the SceneObjectGroupsByLocalPartID collection in SceneGraph.GetGroupByPrim() if an inconsistency is found.
This is the message sent to the client when the object is returned.
We were sending byte[0] in the binary bucket. This didn't kill viewer 1 but did terminate viewer 3 (don't know about viewer 2).
So sending "\0" instead.
This is to address http://opensimulator.org/mantis/view.php?id=5683
Leaving them at UUID.Zero meant that when a viewer 2 logged into a region that had been freshly created, it received UUID.Zero for these textures, and hence display the land as plain white.
On a simulator restart, the problem would go away since when the database adapators loaded the new region settings, RegionSettings itself has code to use default textures instead of UUID.Zero.
This commit resolves the problem by saving the default texture UUIDs instead of Zero.
However, we currently have to do this in a roundabout way by resaving once the RegionSettings have been created by the database for the first time. This needless complexity should be addressed.
This change will also have the effect of replacing any existing UUID.Zero terrain textures with the default ones.
However, this shouldn't have any effect since the UUID.Zeros were already being replaced in memory with those same UUIDs.
This method wasn't actually doing anything since dropped attachments retain a PCode of 9.
Also, behaviour of dropped attachments in other places appears to be that they persist after avatar logout rather than get deleted.
It's never possible for SOG to have no RootPart, except in the first few picosends of the big bang when it's pulled from region persistence or deserialized
The only times when ParentGroup might be null is during regression tests (which might not be a valid thing) and when scene objects are being constructed from the database.
At all other times it's not possible for a SOP not to have a SOG parent.
This meant punching in another AddUser() method in IUserManagement to do a direct name to UUID associated without the account check (since NPCs don't have accounts).
May address http://opensimulator.org/mantis/view.php?id=5645
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
This is to prevent situations where the first name returned by GridService.GetRegionsByName is not one that exactly matches the given region name, even when there is an exact match later on in the list.
Only the above two functions call this teleport method (the map uses a different routine) so this seems safe to change.
Addresses http://opensimulator.org/mantis/view.php?id=5606
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517, this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
Justin Clark-Casey (justincc)