6a0de355e0
Add active status to "show connections"
2012-07-12 22:37:48 +01:00
65a25ee510
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-12 22:35:38 +01:00
ca412032e8
Put output for "show connections" command into standard table format.
...
Also moves into own method.
2012-07-12 21:36:33 +01:00
743437262e
Many explanitory comments added to the link and delink code in
...
SOG and SOP. Should have no functionality changes.
2012-07-11 16:12:38 -07:00
916e3bf886
Where possible, use the system Encoding.ASCII and Encoding.UTF8 rather than constructing fresh copies.
...
The encodings are thread-safe and already used in such a manner in other places.
This isn't done where Byte Order Mark output is suppressed, since Encoding.UTF8 is constructed to output the BOM.
2012-07-11 22:54:22 +01:00
33cff9b9d7
Allow XEngine StartDelay to be configured in the [XEngine] config section.
...
This is only currently meant for use by regression tests that don't have any issues if XEngine is started up quickly, since no other operations will be occuring simultaneously.
Therefore, this is not yet documented externally.
2012-07-11 21:55:18 +01:00
0e611c47d3
Remove WorldComm module from the regression TestCompileAndStartScript() since the infrastructure no longer fails if this module isn't present, at least on the tested codepaths
2012-07-11 21:46:46 +01:00
fc24563206
Add regression TestDetachScriptedAttachmentToInventory()
...
This currently only does a relatively crude check for a ScriptState node in the serialized xml
2012-07-11 21:43:35 +01:00
14d05dc2a9
Add regression TestRezScriptedAttachmentsFromInventory() though this currently only checks for the presence of script items, not for started scripts
2012-07-11 19:54:40 +01:00
337ea019bd
If a part has a sit target and an avatar is already sitting, allow another avatar to sit in the position given if no sit target was set.
...
Previous behave was that the second avatar could not sit.
This matches behaviour observed on the LL grid.
2012-07-10 23:55:22 +01:00
cdea572d2e
refactor: move management of SOP.SitTargetAvatar into SOP.AddSittingAvatar() and SOP.RemoveSittingAvatar()
2012-07-10 23:50:04 +01:00
11e0ad6dc8
Revert "refactor: Add SOP.IsSitTargetOccupied to improve readability"
...
This reverts commit c8f0d476d2
2012-07-10 23:39:05 +01:00
c8f0d476d2
refactor: Add SOP.IsSitTargetOccupied to improve readability
2012-07-10 23:34:40 +01:00
69a6f6e3cd
refactor: use sit orientation argument passed in to SP.SendSitResponse() rather than creating a new copy
...
There are no issues with side-effects since this is a struct.
2012-07-10 23:26:40 +01:00
e8347b7095
Move common code to detect whether a part has a valid sit target into a SOP property rather than being repeated in SP.
...
This also makes the detection in SP.FindNextAvailableSitTarget() and SendSitResponse() identical.
Previously they varied slightly (SendSitResponse didn't check for an older type of invalid quaternion) but the practical effect is most probably zero.
2012-07-10 23:21:39 +01:00
506437b684
Remove log line accidentally left in SP.SendSitResponse()
2012-07-10 23:06:34 +01:00
9f01c3d408
Disable logging in regression test in OSSL_ApiAttachmentTests
2012-07-10 23:04:44 +01:00
58869e5aa0
Fix recent SOP.GetSittingAvatars() to return null if there are no sitting avatars rather than throwing an exception.
...
Extends sitting avatar regression tests to test new sitters information
2012-07-10 23:03:52 +01:00
f3134b5cf6
When an attachment is detached to inv or derezzed, stop the scripts, update the known item with script state still in the script engine and then remove the scripts.
...
This is to fix a regression starting from 5301648
2012-07-10 22:41:11 +01:00
eb5ec4a786
If a script is being stopped manually, then give the scriptpool thread 1 second to finish normally before forcibly aborting.
...
This is to avoid the worst of the problems in mono 2.6, 2.10 where an aborted thread does not always release all its locks.
This very short grace period is identical to the existing behaviour when a script is removed from the scene.
2012-07-10 21:42:51 +01:00
c8af20f966
This script allows an object to be attached directly from prim inventory to another avatar in the scene.
...
Very useful in serious game/environment scenarios where its only allowed for trusted creators.
Threat level Severe
2012-07-09 23:08:41 +01:00
d6f563794e
Don't allow a prim to be sat upon if its part of an attachment
2012-07-09 21:43:44 +01:00
2eaa6d5ace
Do not allow a script to attach a prim if its being sat upon.
...
This prevents a stack overflow where a get position on the avatar will refer to the attachment which will in turn refer back to the avatar.
This required recording of all sitting avatars on a prim which is done separately from recording the sit target avatar.
Recording HashSet is null if there are no sitting avatars in order to save memory.
2012-07-09 21:24:32 +01:00
112cddc9ca
minor: rearrange INITIALIZATION COMPLETE log message so that it's clear init is only complete for a particular region at a time
2012-07-07 00:53:17 +01:00
16d5b79d57
minor: remove some recent mono compiler warnings
2012-07-07 00:36:01 +01:00
1201307c73
Remove duplicate Warp3DImageModule entry in CoreModulePlugin.addin.xml
...
This was causing 2 copies of the module to be created for each scene.
Probably no bad consequences other than a small waste of memory (both for the module and for the warp3D renderer it loaded)
2012-07-07 00:26:25 +01:00
a85741ac37
minor: Make WORLD MAP category log lines consistent
2012-07-07 00:14:16 +01:00
3bd134474b
minor: Get RegionReady module to shout initialization complete status to draw the eye
2012-07-07 00:09:33 +01:00
b19ead5f9e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-07-07 00:05:16 +01:00
7ff4eec79c
Remove redundant SetScene() function in Scene.AddSceneObject()
...
This is always done later on in SceneGraph.AddSceneObject() if the call hasn't failed due to sanity checks.
There's no other purpose for this method to exist and it's dangerous/pointless to call in other conditions.
2012-07-07 00:02:45 +01:00
7aff238eee
Merge branch 'bulletsim2'
...
Cleanup preceeding major work. No major functional changes.
Collisions reported to simulator more efficiently.
BulletSim binaries updated using a more recent version of Bullet (v2.80-r2527).
2012-07-06 15:59:09 -07:00
f1f390cfdf
Remove now duplicate interregion object check that should have been removed a few commits ago in 43a2da9
2012-07-06 23:22:40 +01:00
74014a3854
minor: Remove some wrong comments in attachments regression tests
2012-07-06 23:13:00 +01:00
e4a6611865
Clean up collision reporting code so they are properly passed to
...
the simulator in batches.
More comments.
2012-07-06 15:09:19 -07:00
056c9a59b2
Add assert to attachment regression tests to check that number of objects in the scene graph
2012-07-06 23:07:50 +01:00
ae1f2114f5
Mantis 6077 trim NPC chat on channel zero.
...
This patch trims leading and trailing spaces from NPC chat and
suppresses the sending of empty chat strings on open chat channel 0.
2012-07-06 22:49:18 +01:00
1b1f841c6a
Mantis 6063 osNpcTouch.
...
Allow NPCS to touch obects.
2012-07-06 22:37:19 +01:00
43a2da9edb
Pull prim crossing/teleport checks up into Scene.IncomingCreateObject() from Scene.AddObject()
...
Only IncomingCreateObject() needs these checks. General object adding does not need to perform crossing perm checks
2012-07-06 22:33:16 +01:00
f6e5791ecd
refactor: extract method UpdateUserInventoryWithAttachment() from AttachObject() for better code comprehension
2012-07-06 22:07:19 +01:00
843112340e
Log MONO_THREADS_PER_CPU value on simulator startup, or "unset" if it is not set
2012-07-06 00:37:45 +01:00
7e73f609e5
Log warning if time between invocations of the watchdog thread is twice the timer setting.
...
This is to help detect situations where thread timeout warnings are being generated because of general machine issues rather than deadlock, network or other problems.
2012-07-05 23:15:59 +01:00
db9616f7ba
minor: add client name to various login service log messages to disambiguate messages from concurrent logins. Also adds destination resolution debug log message showing region endpoint.
...
Adding endpoint to the log helps to find issues where the region external host information has been wrongly configured
2012-07-05 21:30:20 +01:00
8674604ff5
regrade osFormatString, osMatchString and osReplaceString to VeryLow.
...
I can't see that these present any real hazard to sim functioning.
2012-07-05 21:10:59 +01:00
510e809aba
porting console commands from raw2sculpt 3.2
2012-07-05 00:16:31 +01:00
951b45b80f
Add OSSL function osForceAttachToAvatarFromInventory()
...
This works like osForceAttachToAvatar() but allows an object to be directly specified from the script object's inventory rather than forcing it to be rezzed in the scene first.
Still only attaches objects to the owner of the script.
This allows one to bypass the complicated co-ordination of first rezzing objects in the scene before attaching them.
Threat level high.
2012-07-05 00:05:06 +01:00
7b327848d0
Use GetInventoryItem() in llRezAtRoot rather than iterating through a cloned dictionary
2012-07-04 22:21:47 +01:00
2f998fce1f
refactor: In llGetNotecardLine() use existing GetInventoryItem() rather than inspecting a clone of the TaskInventory dictionary that was not cloned thread-safe
2012-07-04 22:00:39 +01:00
1816ecb747
refactor: In llGetNumberOfNotecardLines() use existing GetInventoryItem() rather than inspecting a clone of the TaskInventory dictionary that was not cloned thread-safe
2012-07-04 21:57:57 +01:00
eacba4fc0b
refactor: use existing GetInventoryItem() in GetScriptByName(), itself renamed from ScriptByName()
2012-07-04 21:54:30 +01:00
9fac7fd932
refactor: In llGetInventoryType() use existing GetInventoryItem()
2012-07-04 21:50:52 +01:00
f2b0377c28
refactor: In llGetInventoryCreator() use existing GetInventoryItem()
2012-07-04 21:49:21 +01:00
d933bdbd59
refactor: In llGetInventoryPermMask() use existing GetInventoryItem()
2012-07-04 21:47:20 +01:00
f9fa34408d
refactor: in llGetInventoryPermMask use existing GetInventoryItem()
2012-07-04 21:42:04 +01:00
857494f6bd
refactor: In llRemoteLoadScriptPin() use existing GetInventoryItem()
2012-07-04 21:36:44 +01:00
dff7cae2ee
refactor: replace use of LSL_Api.GetTaskInventoryItem() with existing GetInventoryItem()
2012-07-04 21:33:35 +01:00
0e3fce9b5c
refactor: In llGetInventoryKey() use existing GetInventoryItem()
2012-07-04 21:25:58 +01:00
4b2b14dad1
In llMessageLinked() use GetInventoryItems() rather than cloning TaskInventory directory
...
GetInventoryItems() returns a new list and so is equivalent, and creates this list under lock whereas Clone() is not thread-safe
2012-07-04 21:22:43 +01:00
3769739ca7
In llRequestInventoryData() use GetInventoryItems() rather than cloning TaskInventory directory
...
GetInventoryItems() returns a new list and so is equivalent, and creates this list under lock whereas Clone() is not thread-safe
2012-07-04 21:19:16 +01:00
3717812ce0
refactor: In llCollisionSound() use existing GetInventoryItem() method rather than have it iterate through TaskInventory itself.
2012-07-04 21:15:00 +01:00
ae64d089c6
refactor: In llRemoveInventory() use existing GetInventoryItem() method rather than have it iterate through TaskInventory itself.
2012-07-04 21:05:51 +01:00
58b13d51a7
refactor: make llGiveInventory() use existing GetInventoryItem() method rather than iterate through TaskInventory itself.
2012-07-04 20:57:48 +01:00
5691a8b860
refactor: rename Watchdog.WATCHDOG_TIMEOUT_MS to DEFAULT_WATCHDOG_TIMEOUT_MS to reflect what it actually is
2012-07-04 00:15:03 +01:00
f7b4802577
Correct spelling mistake m_BanedViewers to m_BannedViewers
2012-07-03 23:26:02 +01:00
8183c2926d
minor: Add some method doc to HasGroupChanged and Schedule GroupForFull/PartUpdate() to indicate when region modules need to invoke them
2012-07-03 23:19:11 +01:00
3c9b9a848f
Fix issue in database tests where sogs being stored are not in a scene.
...
This puts an extra m_part.ParentGroup.Scene == null check at the top of SceneObjectPartInventory.QueryScriptStates()
2012-07-03 22:58:58 +01:00
3399596e0e
Adds a list of viewers that are allowed or banned from the region.
...
Signed-off-by: Melanie <melanie@t-data.com>
2012-07-02 18:45:11 +01:00
d32cf21576
Add preservation of running state of scripts when drag-copying.
2012-07-01 18:30:59 +01:00
1926de5a05
Remove some mono compiler warnings
2012-06-30 01:25:39 +01:00
a4551b027b
Removing unused handling of incoming create object by userID and itemID only.
...
It appears this was never actually used since attachments were rezzed in other code.
This was never available on remote simulator comms, only local.
2012-06-30 01:14:49 +01:00
56c776066c
Remove code listed for removal in 0.7.3 that handled script restart for incoming attachments from pre-fatpack regions (versions of OpenSimulator more than a year old)
2012-06-30 01:06:37 +01:00
0229e90dcc
Move update of the final optional ODE total frame stat inside the OdeLock rather than outside to avoid a very occasional race condition with the stat collection thread
2012-06-29 01:02:35 +01:00
e420f815dc
refactor: rename _collisionEventPrim to m_collisionEventActors and _collisionEventPrimChanges to m_collisionEventActorsChanges to reflect their actual contents.
...
These dictionaries handle all actor types, not just physical prims.
2012-06-29 00:54:40 +01:00
1a7be7b00e
Fix a regression where we stopped removing avatars from collision event reporting on logout, rather than stopping clearing their collision events.
...
This occurred in b18c8c8
2012-06-29 00:36:50 +01:00
0f6b7b6a41
If a link points to a non-existing item in FetchInventory caps, then don't try to add it to the return data rather than suffering an exception later on
2012-06-29 00:11:44 +01:00
f202c36106
Add IScene.Name for code clarity to replace the RegionInfo.RegionName used in many, many log messages.
2012-06-29 00:03:22 +01:00
bfa6896678
Change AttachmentsModule.DetachSingleAttachmentToInv() to accept a SOG directly instead of an item ID to then shuffle through attachments, saving CPU busywork.
...
Almost all callers already had the sog to hand.
Still checking that it's really an attachment, but now by inspecting SOG.AttachedAvatar
2012-06-28 23:31:23 +01:00
571fd966cb
Rather than iterating through all SOGs in the scene looking for the one that matches out fromItemID on detach, go through the agent's attachment sog list instead.
2012-06-28 23:01:12 +01:00
f263d6a910
Remove code that tried to delete an attachment back to inventory if RezSingleAttachmentFromInventoryInternal() returned null.
...
null would only ever be returned if the item couldn't be located within inventory and this would happen immediately.
In this case, derezzing wouldn't work anyway since there is no item to derez.
2012-06-28 22:48:49 +01:00
972b0b52f9
If rest of first line after colon is blank then still warn about running in XEngine if engine specified does not exist.
...
This is to take account of situations where the user was intending to specify a script engine using colon using its default language.
This probably generates few false positive as scripts are less likely to end a first line colon with a comment for other purposes.
2012-06-28 21:30:36 +01:00
25baa2d894
Avoid reporting false positives when a colon is in a comment in the first line of a script where the user was not trying to select a different script engine.
...
This works by only posting the "Selected engine unavailable" message if we're falling back on XEngine and the language is one handled by XEngine.
In cases where the language is not handled or not allowed, the user will still be notified by the later compiler error.
This avoids the overwhelming majority of false positives where the first line contains a : for other reasons (e.g. source control systems, vim settings, etc.)
Ultimately, I think it would be better to detect script language/engine with a mechanism that didn't just rely on : detection (e.g like #! in unix scripts).
2012-06-28 01:01:18 +01:00
f9769a9fcb
minor: reuse colon index calculation in XEngine.OnRezScript. The index if a colon is found on the first line will always be the same as for the whole script.
2012-06-28 00:37:23 +01:00
bb48060b44
Fix issue in InventoryArchiveTestCase where it didn't call down to OpenSimTestCase.SetUp()
2012-06-27 00:50:36 +01:00
d043213317
refactor: Move ScenePresence <-> AgentData attachments copying code into AttachmentsModule.
2012-06-27 00:41:46 +01:00
5bec5bcf71
Automatically disable log4net before each regression test so that logging is confined to a single test if it's turned on.
...
This involves making test classes inherit from a common OpenSimTestCase.
This will be applied to more classes as required.
2012-06-27 00:01:51 +01:00
87ca820f9b
Replace "kill uuid" console command with the more consistent "delete object uuid", which was present in the last opensim release.
2012-06-26 23:28:48 +01:00
0b29877790
Fix output for help on some object region console commands
2012-06-26 23:15:15 +01:00
97437feb06
Show region positions in "show regions" robust console command
2012-06-26 23:05:10 +01:00
2524517986
minor: correct GridService "show regions" cibsike cinnabd usage statement
2012-06-26 22:54:41 +01:00
99954c1498
refactor: Remove unnecessary AttachmentModuleTests.m_userId in favour of local variables
2012-06-26 22:53:08 +01:00
2b82c421ad
refactor: Use local attachment module variables instead of global m_attMod.
...
This also avoids confusion between tests where one sets up m_attMod and another accidentally uses it after failing to set one up itself.
2012-06-26 22:31:25 +01:00
4329cc7b8a
refactor: make m_presence a local variable in all AttachmentsModuleTests since it doesn't need to be global and some tests set up more than one sp
2012-06-26 22:21:54 +01:00
32a4ce94f0
Add regression test to check that attachments in source region are deleting when an agent teleports to a neighbouring region
2012-06-26 22:16:44 +01:00
340005c5bf
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-26 22:12:39 +01:00
4b6c3fd4bb
If crossing attachments into another region pre-fatpack, clone objects before changing properties to avoid hud display race condition with update threads.
...
This matches behaviour in fatpack crossing, where attachments are cloned before their properties are changed.
This only applies to crossings to simulators running code released before April 2011.
2012-06-26 21:06:47 +01:00
988112d446
Add stub for llCastRay
2012-06-26 15:15:25 -04:00
1f22b29ca3
Add much easier ConsoleDisplayTable AddColumn() and AddRow() methods.
...
Use these for new "show regions" command rather than old cumbersome stuff.
2012-06-26 00:40:46 +01:00
5292b8b8be
Add "show regions" console command to ROBUST to show all regions currently registered.
...
Command is not added in standalone, which has its own version of "show regions" that can also show estate name
2012-06-26 00:34:37 +01:00
854f2a913c
Add "show region at" command to grid service to get the details of a region at a specific location. "show region" command becomes "show region name" to disambiguate
...
This is the same format as used by "show object name", etc.
"deregister region" also becomes "deregister region id"
2012-06-25 23:55:14 +01:00
f5316984ab
minor: update currently commented out log message at top of AvatarFactoryModule.SetAppearance() for future use
2012-06-25 23:31:22 +01:00
e5b739aaeb
When attachments are being saved and deleted for a closing root agent, delete first to avoid a hud race condition with update threads.
...
If delete doesn't occur first then the update thread can outrace the IsAttachment = false necessary to save attachments and send hud artifacts to other viewers.
2012-06-25 22:48:13 +01:00
5301648cff
In AttachmentsModule.DetachSingleAttachmentToInvInternal(), remove attachment before changing properties for correct inventory serialization.
...
Serialization of attachments requires IsAttachment = false so that correct positions are serialized instead of avatar position.
However, doing this when a hud is still attached allows race conditions with update threads, resulting in hud artifacts on other viewers.
This change sets SOG.IsDeleted before serialization changes take place (IsDeleted itself is not a serialized property).
LLClientView then screens out any deleted SOGs before sending updates to viewers.
2012-06-25 21:08:19 +01:00
6d3ee8bb39
Fix script "Running" behavior
...
Unchecking "Running" box in script editor now persists. This fixes http://opensimulator.org/mantis/view.php?id=6057
2012-06-23 04:15:14 -04:00
78143769bf
Resolve various race conditions between accessing and removing external script URLs by more consistently locking on m_UrlMap
2012-06-22 23:49:52 +01:00
dca04c7b61
Avoid a race condition where an incoming request to a script external URL can trigger an exception is the URL was being removed at the same time.
...
This involves three steps
1) Return gracefully in UrlModule.HttpRequestHandler() instead of throwing an exception when the url cannot be found in its index
2) Return true instead of false in HasEvents() if no matching request is found in the map. This call will only happen in the first place for raced requests.
3) Return a 404 in GetEvents() if the request is not in the index, rather than a blank 200 OK.
Many thanks to Tom Haines in http://opensimulator.org/mantis/view.php?id=6051 for doing some of the work on this.
2012-06-22 23:16:18 +01:00
80a41e670d
Avoid race condition between m_PrimObjects iteration in XEngine.PostObjectEvent and places where the list is modified by extending the m_PrimObjects lock.
2012-06-22 02:23:25 +01:00
9f3feeff8d
If starting scripts on initial sim start, provide INFO level log feedback each time 50 scripts have been started.
...
This is to provide an indication of what's happening now that the default isn't to report every single script start.
Changes XEngine logging level in OpenSim.exe.config from WARN to INFO.
2012-06-22 02:10:27 +01:00
f907182ab2
Eliminate unnecessary extra call to TriggerEmptyScriptCompileQueue in XEngine.DoOnRezScriptQueue()
...
The later invocation of this function will happen on an empty compile queue.
2012-06-22 01:57:14 +01:00
4cf49369b5
Stop flicking IsAttachment false and then true in AttachmentsModule.UpdateAttachmentPosition() in order to avoid a hud update race condition.
...
Previously, setting IsAttachment to false then true was necessary to serialize the updated attachment object information.
However, UpdateAttachmentPosition no longer does this update.
Whilst IsAttachment is set to false there is a race condition where the update thread can wrongly send hud object updates to clients that do not own the hud, resulting in screen artifacts.
2012-06-22 01:43:26 +01:00
fda39c11bf
Fix bug where attachments would not retain position if just rotated and not moved.
...
This was because we were not setting AttachedPos in SOG.UpdateGroupPositionPR, unlike UpdateGroupPosition
2012-06-22 01:33:27 +01:00
798846c5b6
refactor AttachmentsModule tests to use a common method for standard attachment item setup
2012-06-22 00:40:04 +01:00
06617ffd06
Add regression test for updating attachment position
2012-06-22 00:18:30 +01:00
d24122b706
Add item id, name, prim name and id to log message when state exists but loading fails.
...
Drop logging about memory limit exceeded to warn from error
2012-06-21 02:24:44 +01:00
afcabf5244
Retrigger build - last jenkins run was glitched
2012-06-21 02:13:03 +01:00
5709bed548
Add state file location to errors logged when there's some issue with retrieving state (e.g. exceeds memory limit)
2012-06-21 02:09:14 +01:00
68ea096f1b
Use HasPrivateAttachmentPoint properties in SOG.DeleteGroupFromScene() instead of magic numbers
2012-06-20 23:25:07 +01:00
714db90832
refactor: use SOG.HasPrivateAttachmentPoint in SOP.SendTerseUpdateToClient() instead of attachmentpoint magic numbers.
2012-06-20 22:46:01 +01:00
b23425c7c4
As with LLSDInventoryItem from commit 01a2b0b, send type values in LLSDInventoryFolder for inventory CAPs as integers rather than strings.
...
Should also resolve some issues with exceptions being thrown in some inventory fetches.
2012-06-20 02:28:00 +01:00
9ec9dafae6
Lower warn logging on not having friends/group module on permissions to debug.
...
It's a valid configuration not to have these modules, but I think it's still worth logging the fact that certain permissions won't work (always return true)
2012-06-20 01:33:25 +01:00
6c312bce7f
minor: Lower flotsam asset cache warning about not having a FlotsamCache.ini to debug
...
It's perfectly okay not to have this section.
2012-06-20 01:30:20 +01:00
4cfaa01c0a
Remove STARTUP COMPLETE message from the startuplogo.txt file and into main logging
2012-06-20 01:06:55 +01:00
6b3f9fcde0
Comment out the neighbour and land in connectors from info logging that they are starting up
2012-06-20 00:42:54 +01:00
625e5e913a
Comment out recently added log message detailing number of scripts started when compile queue empties for now
2012-06-20 00:25:18 +01:00
881e92a726
Raise some IO associated Exception logging in XEngine to error level, in line with other similar cases.
...
Remove more unnecessary Close() calls - these are being triggered by the Dispose() called when exiting the using statement for these sdk io objects.
2012-06-20 00:19:50 +01:00
0fa303b1cf
Log how many scripts are candidates for starting and how many are actually started.
...
Adds DebugLevel infrastructure to XEngine though currently commented out and unused.
2012-06-20 00:10:19 +01:00
9737e6d52e
If RegionReady is active, don't falsely say that logins are enabled in the main scene loop before RegionReady is signalled when initial script compilation finishes.
...
Also raises this logging level to Info from Debug since this information is of high importance. This matches the behaviour of the RegionReady module
2012-06-20 00:07:03 +01:00
e23d7ff9c0
minor: If logging because mesh/sculpt data isn't present for an object, log object UUID rather than local id, since UUID doesn't potentially vary between simulator starts.
2012-06-20 00:05:48 +01:00
ef686ead37
Like the assembly and text files, only write the c#-lsl linemap in XEngine.SetXMLState() if the trust binaries flag is set.
...
This doesn't affect other locations where the map is written, such as on script compilation.
2012-06-19 02:11:46 +01:00
8e7032ece8
minor: Add a little more detail to IOException logging in XEngine.SetXMLState()
...
Also removes superflous Close() commands for statements taking place within using() constructs
Also adds some comment out debug log messages for future use.
2012-06-19 01:53:50 +01:00
7119de56ff
Change read config paramter from max_urls_per_simulator to max_external_urls_per_simulator, which is what it was meant to be
2012-06-16 04:12:53 +01:00
ed513fc7be
Fix bug introduced in commit c6e3752 (13 Jun 2012) where poll responses would always return OK even if some other status code had been set
2012-06-16 03:43:45 +01:00
22f25dfcab
Implement max_external_urls_per_simulator setting in [LL-Functions] to allow configuration of how many urls can be set up by llRequestURL()
...
Defaults remains as 100.
This setting is per simulator instead of per region due to how the url script module is structured.
2012-06-16 03:32:47 +01:00
aaa30dcebc
Add region name to UseCircuitCode log messages
2012-06-15 05:01:36 +01:00
c935f03467
Put all debug console commands into a single Debug section rather than scattering them over other categories
2012-06-15 03:32:43 +01:00
94517c8d5c
Make the "debug http" command available for robust as well as the simulator. This allows one to see incoming requests as they happen.
...
This required making everything use the common MainServer class for registering and retrieving http servers, rather than duplicate structures.
2012-06-15 02:51:52 +01:00
257b1b517d
Add main instance to internal MainServer.m_Servers list to simplify internal logic.
...
This does require the server to be added before it is set as the main Instance
2012-06-15 02:03:50 +01:00
aeed4d3041
minor: Tell user the current debug http level if "debug http" console command is executed without a level parameter
2012-06-15 01:27:29 +01:00
478acfff34
When setting debug http level, do this for all known http servers, not just the main instance.
2012-06-15 01:24:36 +01:00
10e87f9cdc
Make XMLRPCModule use an existing HTTP server if one already exists on the desired port.
2012-06-15 00:59:53 +01:00
6993a26ba5
Get rid of some unnecessary null checks in RegionApplicationBase.StartupSpecific() - a constructor can never return null.
...
Also adds some method doc to MainServer
2012-06-15 00:40:12 +01:00
93ba0332c4
minor: Extend 'debug http' usage statement to 0..3 from 0..2
2012-06-14 23:54:12 +01:00
9825861f4a
Shuffle "debug http" levels so that 1 and 2 now cause different levels of warn to be logged if we receive invalid xml for xmlrpc.
2012-06-14 23:46:09 +01:00
f4b02f8e39
Fix a regression in BaseHttpServer.HandleXmlRpcRequests() from recent c6e3752
...
Accidentally make responseString null by default instead of String.Empty.
It needs to be something in case the XmlRpcRequest deserialize throws an exception due to bad xml (a failure which we silently swallow!)
2012-06-14 04:29:15 +01:00
2c6555021f
Fix very recent regression in 917d753 where I put the ++updatesThisCall outside the batching part of ProcessEntityUpdates()
...
This stopped any batching happening and since this method is called periodically updates were sent very slowly
2012-06-14 03:49:54 +01:00
3888b9a670
If we're going to discard a terse update block because it's now someone else's hud, then don't still add it to the list of blocks for the update message.
2012-06-14 03:32:44 +01:00
1aa7469253
correct wrong incomplete comment from previous commit 3c3ea19 in AttachmentsModule
2012-06-14 02:30:40 +01:00
3c3ea19620
Fix a bug where scene objects attached as HUDs through scripts would not disappear for other avatars.
...
We do this by sending a kill message for that object to all other avatars apart from the one that has the hud.
2012-06-14 02:26:38 +01:00
0d2243a393
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-14 01:38:41 +01:00
917d753f1c
Fix a race condition where an object update for a hud could be sent to non-owner avatars if the hud was attached directly from within the region.
...
If this happens, then the non-owners would see unremovable huds that they did not own until relog, and sometimes even beyond that.
This was due to a race between the entity update and the attachment code when moving an object from within scene to a hud.
2012-06-14 01:36:37 +01:00
a4290048e5
Add SOG.HasPrivateAttachmentPoint to tell if a SOG has a private attachment point. HUDs attachment points are private.
...
Change SOP.SendFullUpdateToClient() and SoundModule.PlayAttachedSound() to use this rather than different magic number formulations.
This also corrects a bug in PlayAttachedSound() where the code assumed that all attachment points over 30 were HUDs.
It appears this is no longer true with Neck and Root (Avatar Center)
2012-06-14 01:20:55 +01:00
cba8b4f8b8
Fix not sending TransferInfo when an asset is not found. This clogs
...
up the sound pipeline in the viewer.
2012-06-14 00:58:17 +01:00
6a77a65675
minor: remove unnecessary IsAttachment = false setting for new object in UploadObjectAssetModule, property always starts as false
2012-06-14 00:35:26 +01:00
16ffc764bf
minor: refactor part of LLClientView.ProcessEntityUpdates() to remove duplicate code
2012-06-13 23:54:32 +01:00
cf080a68d6
Remove long obsolete and unused IClientAPI.KillEndDone()
2012-06-13 23:42:22 +01:00
f726150afd
Add ObjectUpdate as one of the packets that can be screened out when setting debug packet level
2012-06-13 23:39:23 +01:00
1f34c8277d
In the osGetGrid functions, if the [GridInfo] section does not exist then return "Configuration Error", as already happens if there is no GridInfoURI
2012-06-13 04:05:02 +01:00
66cb533f26
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-13 03:51:13 +01:00
5145356467
Add "deregister region" by uuid command to grid service to allow manual deregistration of simulators.
...
Useful if a simulator has crashed without removing its regions and those regions have been reconfigured differently
2012-06-13 03:49:22 +01:00
4e18e71089
Committing the Avination implementation of llCastRay. This is a complete rewrite
...
wich does it's thing independently of physics. Enjoy!
2012-06-13 02:32:25 +01:00
94bbbf96c7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-13 02:25:42 +01:00
c6e375291a
Don't include time to transmit response back to requester when assessing slow handling of requests.
...
This is to avoid logging a 'slow' request when the source of delay is the viewer in processing a response.
This is not something we can do much about on the server end - it's server-side delay that we're interested in.
To ensure consistency, this commit also had to refactor and simplify inbound non-poll network request handling, though there should be no functional change.
IOSHttpResponse no longer exposes the Send() method, only classes in OpenSim.Framework.Servers.HttpServer should be doing this.
Only the GetTextureHandler was sending its own response. Now it leaves this to BaseHttpServer, like all other core handlers.
2012-06-13 00:03:44 +01:00
c53c55fed0
Add variable timer configureation for the timer_Script
...
Added "timer_Interval" to the OpenSimDefaults.ini, leaving the default value set to 1200, as the previous default setting. The value represents seconds. To change the default, copy the entry to OpenSim.ini and multiply the number of minutes for the interval by 60.
2012-06-12 17:15:56 -04:00
2ca31a9841
Remove accidental timeout left in during earlier debugging. Has been in since two commits ago ( b099f26)
2012-06-12 02:46:14 +01:00
1b1f0a2d77
OnConnectionClosed listeners, retrieve data from IClientAPI.SceneAgent rather than scanning all scene for the presence with the right id
...
Stop checking IsLoggingOut on these listeners, if called with a root agent then we always want to perform these actions.
This covers cases where the client is closed due to manual kick, simulator shutdown, etc.
2012-06-12 02:43:33 +01:00
b099f26376
Set IClientAPI.IsActive = false early on client removal due to ack timeout rather than using IsLoggingOut flag.
...
IsActive is more appropriate since unack timeout is not due to voluntary logout.
This is in line with operations such as manual kick that do not set the IsLoggingOut flag.
It's also slightly better race-wise since it reduces the chance of this operation clashing with another reason for client deactivation (e.g. manual kick).
2012-06-12 02:16:36 +01:00
c89db34fc4
If the simulator closes a root agent due to ack timeout, then send the client a kick message with that reason, in case it is somehow still listening.
2012-06-12 02:03:31 +01:00
8c7149063b
In PresenceDetector.OnConnectionClose(), use the IsChildAgent check already available on IClientAPI.SceneAgent rather than retrieving it again by scanning all scenes.
2012-06-12 01:25:09 +01:00
bab7dab4c5
Comment out the scene presence sitting debug log messages for now
2012-06-11 23:37:16 +01:00
daad0a3e11
Revert "Bind ~ and ! operators in LSL tighter in order to resolve issues in LSL where these aren't evaluated propertly."
...
This reverts commit a8a9d13dc0
2012-06-11 23:30:58 +01:00
a927787434
Add last frame time monitor to MonitorModule now that this value is useful
2012-06-11 23:30:11 +01:00
cbb5ddd944
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-11 23:27:48 +01:00
71ba85137f
Commitig the Avination implementation of llTeleportAgent and
...
llTeleportAgentGlobalCoords. These do NOT use PERMISSION_TELEPORT like
their SL counterparts because that permission is not yet understood by TPVs
based on v1.x.
2012-06-11 16:45:52 +01:00
a8a9d13dc0
Bind ~ and ! operators in LSL tighter in order to resolve issues in LSL where these aren't evaluated propertly.
...
Addresses http://opensimulator.org/mantis/view.php?id=3268
2012-06-09 05:11:08 +01:00
817f2d341d
Fix regression in 5f4f9f0 (Fri Jun 8 2012) which stopped "show stats" and json stats from working
2012-06-08 23:36:53 +01:00
794d184c25
Stop sending a DisableSimulator packet in LLClientView.Close(), which is a duplicate for child agents and unnecessary for root agents.
...
Close() already calls Scene.RemoveClient() which sends the right eq or udp DisableSimulator message to child agents.
2012-06-08 04:32:51 +01:00
f94b92df46
Instead of retrieving the known client again in LLUDPServer.RemoveClient(), check the IsLoggingOut flag instead.
...
This is slightly better thread-race wise
2012-06-08 04:12:22 +01:00
c215b1ad16
If logging a client out due to ack timeout, do this asynchronously rather than synchronously on the outgoing packet loop.
...
This is the same async behaviour as normal logouts.
This is necessary because the event queue will sleep the thread for 5 seconds on an ack timeout logout as the client isn't around to pick up the final event queue messages.
2012-06-08 03:53:03 +01:00
5f4f9f0230
Add regression test for client logout due to ack timeout.
2012-06-08 03:12:23 +01:00
d73805d7f4
Remove null checks at top of LLUDPServer.ProcessInPacket(). Neither packet nor client are ever null.
2012-06-08 01:51:28 +01:00
d71c6dea7e
Store already retrieve IClientAPI in IncomingPacket structure for later use rather than doing another retrieve on dequeue.
...
Instead of checking whether the client still exists by trying to retrieve again from the client manager, this patch gets it back from IncomingPacket and checks the IClientAPI.IsActive state.
2012-06-08 01:43:58 +01:00
30f4a33f01
Don't make duplicate call to ScenePresence.Close() separately in ETM.DoTeleport() if an agent needs closing.
...
This is always done as part of Scene.RemoveClient()
Also refactors try/catching in Scene.RemoveClient() to log NREs instead of silently discarding, since these are useful symptoms of problems.
2012-06-08 01:26:43 +01:00
5c162ccd57
Go back to calling IncomingCloseAgent() in the "kick user" command for consistency instead of IClientAPI.Close() directly.
...
This no longer double counts child agent removals
2012-06-08 00:59:39 +01:00
d547bcf8d1
Remove duplicate update of user count in Scene.IncomingCloseAgent()
...
This is already done in Scene.RemoveClient() which IncomingCloseAgent() always ends up calling.
2012-06-08 00:40:38 +01:00
b56673c920
Fix bug with "kick user" reducing agent counts by 2 instead of 1.
...
This is done by making the kick user command call IClientAPI.Close() rather than routing through Scene.IncomingCloseAgent(), which also called IClientAPI.Close()
DisableSimulator for child agents is moved from IncomingCloseAgent() to RemoveClient(), this is not a functional change since IncomingCloseAgent() always ends up calling RemoveClient()
2012-06-08 00:18:25 +01:00
0c5fefacb4
Record the fact that child agents can have asset transactions.
...
Also change code to grab the agent asset transaction module once.
2012-06-07 23:51:04 +01:00
de87e4871b
Don't send kill object messages to clients when a child agent is closed.
2012-06-07 23:35:21 +01:00
a1e857932a
Make change to fix Windows builds
2012-06-07 10:17:37 -04:00
7550b97e65
Log warning if we try to remove a UDP client that has already been removed.
2012-06-07 04:00:29 +01:00
98b46d48fe
Allow the thread watchdog to accept an alarm method that is invoked if the timeout is breached.
...
This alarm can then invoke this to log extra information.
This is used in LLUDPServer to show which client was being processed when incoming and outgoing udp watchdog alarms are triggered.
2012-06-07 02:44:13 +01:00
514dd85199
minor: Change log messages on Warp3DImageModule to show they are from this module
2012-06-06 04:18:38 +01:00
53c25a4778
Rename MapImageModule for Warp3D to Warp3DImageModule to match its class name and make it easier to distinguish between map image modules.
2012-06-06 04:15:00 +01:00
2b0de66216
Actively dispose of Bitmaps in Warp3D image module and world map module once we've finished with them.
...
This might help with memory leakage issues though I suspect it won't.
2012-06-06 04:11:16 +01:00
3b25021180
enabling all corners of a sim to be set in one call
2012-06-06 02:47:47 +01:00
abf94627f6
Ensure closure of bitmap and memory stream with using() statements in WorldViewModule.
...
If this has any effect then it will only be to the map images returned via requests to the /worldview simulator HTTP path (not enabled by default)
2012-06-06 02:45:36 +01:00
6adc810eaa
Stop accidentally reading 4 Int16s instead of 2 in SIZE section of Terragen file when loaded from a stream.
...
Fixes a bug introduced 2 weeks ago in 67ebe80
2012-06-05 19:40:16 +01:00
a5410c2c19
minor: Add user feedback when executing fix-phantoms
2012-06-05 01:37:40 +01:00
42179578fc
Allow fix-phantoms command to appear even if CombineContiguousRegions = false, since this allows one to go back from a megaregion to normal regions.
...
Adapted from a patch by Garmin Kawaguichi in http://opensimulator.org/mantis/view.php?id=6027
Garmin says that fix-phantoms allows one to reset objects when going back from megaregion to normal regions as well as the othe rway around.
Thanks!
2012-06-05 01:33:58 +01:00
008c6a4610
Mantis 4597 AgentPaused packet is ignored.
...
The packet was actually being handled but not acted on.
This change extends the default timeout for paused clients to 5 minutes
and makes both the paused and non-paused timeout periods configurable.
2012-06-05 01:22:05 +01:00
01280e9b94
Remove unused ScenePresence list structure in llGetAgentList()
2012-06-05 00:34:18 +01:00
96d1ba90d7
Scale down per frame MS stats to match scaled simulator FPS stat.
...
This makes frame time stats properly tally with fps, which saves confusion and makes it easier to interpret numbers.
In some ways this is not so artifical - physics FPS runs at the higher rate.
2012-06-05 00:27:51 +01:00
655625ab87
Start sending spare frame time MS viewer stat. Make frame time correctly display total frame time, not just non-spare time.
...
This makes it easier to see when components of frame time exceed normal permitted frame time.
Currently reflect scene frame times.
2012-06-05 00:17:55 +01:00
c3d9acc9a9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-06-05 00:15:29 +01:00
a7f4804f53
Properly show per frame millisecond statistics per frame, not as amount of time taken per second.
...
This is to make these statistics actually match their names (and also be more accurate as number of frames can vary under heavy load)
Currently using scene frames (11.23 every second) instead of physics frames (56.18 per second)
2012-06-04 23:07:53 +01:00
3229e32b4e
Add replaceable region modules to the "show modules" command
2012-06-04 17:25:38 -04:00
d9d4fb10d9
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-06-04 18:22:43 +01:00
f94ef37b46
Correct the delegate specification in EventManager.TriggerTerrainTainted. Looks like the wrong one was cut and pasted.
2012-06-04 10:26:39 -07:00
5c646e2603
Remove the "Profile" config as it's covered by the replaceable interface
2012-06-04 18:22:09 +01:00
729d90173f
Fix build break whree accidentally did inv.Folders rather than inv.Folders.Count in a minor change.
2012-06-02 05:03:56 +01:00
2de5479c3f
minor: tidy up some comments
2012-06-02 05:01:56 +01:00
01a2b0b289
Fix various issues with http inventory
...
1) The return messages were being wrongly populated with the names of asset, inventory and sale types when their corresponding integers should have been used instead.
2) Folders with links were including the linked items in the descendents figure, when only the links should be included.
3) Links and linked items in link folders were not being included in the return data, and not in the correct order.
Now that these issues have been addressed, outfits and attachments appear to work consistently when HTTP inventory is enabled (as is now the default).
2012-06-02 04:57:10 +01:00
72219eae7d
Instead of updating sim stats root agent, child, objects and scripts accounts every single scene frame, update in the once every 3 seconds SimStatsReporter run
2012-06-01 04:47:11 +01:00
6375db1533
Add optional total avatars, total prims and active prims stats to ODE plugin.
...
These will act as a sanity check with the main scene stats, to show that physics scene entities are being managed properly.
Total prims will not match scene total prims since physics total does not include phantom prims
2012-06-01 04:23:36 +01:00
4e06a46dc5
If OdeScene.Near() returns no collision contacts, then exit as early as possible. All subsequent code is only relevant if there are contacts.
2012-06-01 04:07:39 +01:00
200376b3c4
Add optional stat for the other collision time per frame not spent in ODE native spaces or geom collision code
2012-06-01 03:49:42 +01:00
d34b84b531
Add avatar forces calculation, prim force and raycasting per frame millisecond optional stats
2012-06-01 03:23:19 +01:00
9ff8efc720
Collection optional avatar and prim taint frame millisecond times
2012-06-01 03:03:48 +01:00
d1b5f8d9d7
Remove recent optional native collision frame milliseconds stat
...
Unnecessary since this has now been broken down into space collisions and geom collisions
2012-06-01 02:35:11 +01:00
31343aa7c3
Add optional stat that records milliseconds spent notifying collision listeners in physics frames
2012-06-01 02:33:44 +01:00
5f44be99ef
Add avatar and prim update milliseconds per frame optional stats
2012-06-01 02:25:42 +01:00
5cc9b820e5
Add option native step frame ms stat
2012-06-01 01:58:28 +01:00
f2c8c7a7b8
Add total ODE frame time optional stat, as a sanity check on the main scene physics stat
2012-06-01 01:37:19 +01:00
8333b928fa
Break down native ODE collision frame time stat into native space collision and geom collision stats
2012-06-01 01:27:19 +01:00
c33c8db825
Rename new collision stats to 'contacts' - there are/can be multiple contacts per collision and this is what is actually being measured.
2012-06-01 01:15:27 +01:00
e1f8d2adb0
Stop adding an unnecessary duplicate _perloopcontact if the avatar is standing on a prim.
...
This has already been added earlier on in the method.
2012-06-01 01:12:30 +01:00
8301f7b17f
minor: comment out currently unused OdeScene.sCollisionData
2012-06-01 00:57:55 +01:00
93fa9e8991
Add ODE avatar and prim collision numbers if extra stats collection is enabled.
2012-06-01 00:56:13 +01:00
878b67b333
Fix OdeScene.GetTopColliders() to return the top 25 colliders rather than the first 25 that had non-zero collision scores.
...
Also zeros collisions scores on all prims after report collection, not just the top 25.
As before, this collision scores are only reset after a report is requested, which may give unrealistic numbers on the first request.
So to see more realistic scores, ignore the first report and then refresh the request after a couple of seconds or so.
2012-06-01 00:26:11 +01:00
0b02a4d42e
Add an optional mechanism for physics modules to collect and return arbitrary stats.
...
If active, the physics module can return arbitrary stat counters that can be seen via the MonitoringModule
(http://opensimulator.org/wiki/Monitoring_Module )
This is only active in OdeScene if collect_stats = true in [ODEPhysicsSettings].
This patch allows OdeScene to collect elapsed time information for calls to the ODE native collision methods to assess what proportion of time this takes compared to total physics processing.
This data is returned as ODENativeCollisionFrameMS in the monitoring module, updated every 3 seconds.
The performance effect of collecting stats is probably extremely minor, dwarfed by the rest of the physics code.
2012-05-31 01:52:26 +01:00
bf0b8170f7
Add console command "teleport user" to allow teleport from the region console
...
See "help teleport user" on the console for more details
2012-05-29 23:35:20 +01:00
b660c4991b
Fix collision filtering. The filter should be checked on the receiving part!
2012-05-29 18:18:47 +01:00
79f3ce2e9f
refactor: factor out entity transfer state machine into a separate class to make code more analyzable
2012-05-28 23:06:00 +01:00
8f87f55d05
If handling the failure of teleport, move agent state to CleaningUp when we start the handling.
...
Also fixes the log warning from ResetInTransit() if the state is cleared direct from Transferring or ReceiveAtDestination, as pointed out in mantis 5426
2012-05-28 22:16:06 +01:00
7fd38788b4
minor: code formatting from 0b72f773
2012-05-26 02:14:32 +01:00
0b72f773c7
Mantis 6025 llRequestPermissions auto grant for NPCs.
...
If the script requesting permissions is owned by either the NPC or
the NPCs owner (if the NPC is created as owned) then grant any
permissions automatically.
2012-05-26 02:09:22 +01:00
43a6f28620
If restating a region, clean up the physics scene after the main scene has been closed not before.
...
If this is done before then on ODE agent update calls still incoming can fail as they try to use a raycastmanager that has been disposed.
Bullet plugin does nothing on Dispose()
However, I wouldn't be at all surprised if individual region restarting was buggy in lots of other areas.
2012-05-26 01:55:35 +01:00
33b66009e4
One can now get hyoergrid region co-ordinates with llRequestSimulatorData
2012-05-26 01:32:42 +01:00
d6476b6277
Use GetInventoryItem() in LSL_Api.InventoryKey(string name, int type).
...
Also removes small bug where calling this method would add 1 to LPS, evne though all callers already did this.
2012-05-26 01:03:53 +01:00
f2a5fad18f
Use SceneObjectPartInventory.GetInventoryItem() in OSSL.AvatarStopAnimation instead of searching the task inventory manually.
2012-05-26 00:54:00 +01:00
ff53add54d
refactor: replace LSL_Api.InventoryKey(string) largely with SceneObjectPartInventory.GetInventoryItem(string)
...
Also gets llStopAnimation() to call KeyOrName rather than duplicating logic.
2012-05-26 00:36:01 +01:00
120f8145fc
Mantis 6028 osAvatarStopAnimation not stopping animations via UUID
...
Corrected to stop animations using the animation UUID similar to llStopAnimation.
See http://opensimulator.org/wiki/OsAvatarStopAnimation
2012-05-25 23:45:03 +01:00
67ebe80dd9
Resolve some mono compiler warnings.
2012-05-25 04:03:16 +01:00
ab59c0a658
on agent cross, remove from physics scene after its been placed in transit, not before.
2012-05-25 03:39:10 +01:00
888210ea4a
refactor: make ETM.CrossAgentToNewRegionAsync neighbourRegion == null check return earlier to simplify method
2012-05-25 03:06:26 +01:00
9f1fc7ea88
Remove a call stack debugging line accidentally left in from a few days ago at SceneObjectPartInventory.ApplyNextOwnerPermissions().
2012-05-25 02:54:37 +01:00
96cde407ab
Fix bug where a failed QueryAccess to a remove region would always have the reason "Communications failure" no matter what the destination region actually returned
2012-05-25 02:37:22 +01:00
40c78b0624
Stop it being possible for an agent to teleport back to its source region before the source region has finished cleaning up old agent data and structures.
...
If this is allowed, then the client usually gets forcibly logged out and data structures might be put into bad states.
To prevent this, the binary state machine of EMT.m_agentsInTransit is replaced with a 4 state machine (Preparing, Transferring, ReceivedAtDestination, CleaningUp).
This is necessary because the source region needs to know when the destination region has received the user but a teleport back cannot happen until the source region has cleaned up.
Tested on standalone, grid and with v1 and v3 clients.
2012-05-25 02:02:53 +01:00
7cceab1295
In remote QueryAccess, also receive the actual status (true|false) instead of always true no matter what the callee actually returned.
...
This was due to two things
1) SimulationServiceConnector.QueryAccess was always looking to the outer result["success"].
But if a "_Result" map is returned (which is certainly the case right now), then the true success is _Result["success"], result["success"] is always true no matter what
2) If QueryAccess was false at the destination, then AgentHandlers.DoQueryAccess() was never putting this in the result.
The default action of SerializeJsonString() is not to put false booleans in the JSON!!!, so this has to be explicitly set.
2012-05-25 01:41:00 +01:00
93ff27053a
Don't actually proceed on a within-region teleport if another is already taking place, rather than just (falsely) logging that we're not going to proceed.
...
An oversight from recent commit 9ab0c81
2012-05-24 22:59:52 +01:00
cc53d91d2f
On inter-region teleport, only stand the avatar up if the QueryAccess call to the destination scene actually succeeds.
2012-05-24 22:46:45 +01:00
cd225215b1
Now that the EntityTransferModule is per-region, fetch the event queue module once rather than repeatedly via scene presences
2012-05-24 22:40:24 +01:00
5c9086ade6
Fix issue where a dns resolution failure on the final destination might leave the user unable to teleport since the transit flag was not being reset.
...
This moves the 'already in transit' check further up and resets the flag if dns resolution fails and in the new required places.
2012-05-24 22:26:02 +01:00
99cebec4ab
adding status codes from rfc 6585
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-24 12:09:15 -04:00
87f9aa9d08
porting IDE tooltip-friendly documentation tweaks from Aurora-Sim
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-24 12:09:15 -04:00
f4cd4c8e28
Comment out accidentally left in log line that was printing out the control file on OAR save
2012-05-24 04:33:36 +01:00
38ce9d45a5
Make ISimulationScene.GetScene() used the more efficient region id for lookup rather than the region handle.
2012-05-24 01:00:18 +01:00
459c7635af
If an agent is still registered as 'in transit' by the source region, don't allow an immediate teleport back.
...
This is to help relieve a race condition when an agent teleports then immediately attempts to teleport back before the source region has properly cleaned up/demoted the old ScenePresence.
This is rare in viewers but much more possible via scripting or region module.
However, more needs to be done since virtually all clean up happens after the transit flag is cleared .
Possibly need to add a 'cleaning up' state to in transit.
This change required making the EntityTransferModule and HGEntityTransferModule per-region rather than shared, in order to allow separate transit lists.
Changes were also required in LocalSimulationConnector.
Tested in standalone, grid and with local and remote region crossings with attachments.
2012-05-24 00:31:14 +01:00
bc543c1797
Environment Module - allows Environment settings for Viewer3 warning: includes database region store migrations for mssql, mysql, sqlite
...
enable/disable this module:
Cap_EnvironmentSettings = "localhost" (for enable)
Cap_EnvironmentSettings = "" (for disable) at ClientStack.LindenCaps section (OpenSimDefaults.ini file)
or owerwrite in OpenSim.ini
mantis: http://opensimulator.org/mantis/view.php?id=5860
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-23 17:04:19 -04:00
b490050165
Format cleanup
2012-05-23 16:58:04 -04:00
682d4075e3
Fix llGetSimulatorHostname to return configured hostname
2012-05-23 15:08:39 -04:00
4d1986c0e4
minor: Change [OBJECT COMMANDS MODULE] log strings to [REGION COMMANDS MODULE] strings, though all these are currently commented out anyway
2012-05-23 04:20:54 +01:00
ee98b9c394
Add "show scene" command which lists stats for the currently selected console scene(s)
...
This includes prim count, script count, avatar count, etc.
Information is currently the same as "show stats", though show stats can only show one scene at a time because it listens for the latest outgoing stats packet (a bad approach that needs to change).
Might be better to tie this module into the other stats module to display arbitrary stats rather than fetching directly from scene.SimStatsReporter.
Console command is "show scene" because "show region" already exists for the grid service, which is unfortunate.
Might need to make a distinction between "scene" relating to a live scene and "region" relating to more static region data (url, coords, etc.)
2012-05-23 04:10:45 +01:00
8f88c17df9
refactor: Rename ConsoleTableRow and ConsoleTableColumn to ConsoleDisplayTableRow and ConsoleDisplayTableColumn
2012-05-23 03:23:37 +01:00
059a1e90b9
Add ConsoleDisplayList for more consistent formatting of console output in list form.
...
Convert "show region" to use this structure rather than hand-constructing
2012-05-23 03:19:25 +01:00
2222d979cc
refactor: rename ConsoleTable -> ConsoleDisplayTable for clarity
2012-05-23 02:37:38 +01:00
c6ce41bfba
Add missing Y co-ord in "show region" console command information
2012-05-23 02:31:53 +01:00
050007b44d
Lay out "show region" information in an easier to read line by line format
2012-05-23 02:30:16 +01:00
68918d632f
Fetch the dialog module reference in AttachmentsModule in RegionLoaded() not AddRegion()
...
The reference is not guaranteed to be there when AddRegion() is called but will definitely be present at RegionLoaded() if it's going to be present at all.
2012-05-23 02:09:31 +01:00
ec8745cf51
minor: Make log class names in InventoryAccessModule uniform
2012-05-23 02:05:48 +01:00
ff429a259b
Fix bug where an avatar that had an object they owned attached through llAttachToAvatar() or osForceAttachToAvatar() would wrongly have next permissions come into play when they detached that object and rezzed it in scene.
...
This is because the attachments module code was setting the 'object slam' bit by using PermissionMask.All
Solution here is to route the attachment item creation call through the existing inventory code in BasicInventoryAccessModule rather than copy/pasted code in AttachmentsModule itself.
2012-05-23 01:58:10 +01:00
9ab0c81c1d
Setting 'in transit' on a local teleport as well as inter-region teleports.
...
This is to eliminate possible race conditions if two teleport calls are made concurrently, where at least one is a local teleport.
This is pretty much impossible on a manual user teleport but can happen on script-invoked teleports.
2012-05-21 21:33:59 +01:00
7e97f0e898
minor: extend commented out LinkInventoryItem log message for future use
2012-05-21 21:00:22 +01:00
16d303f7cd
Fix bug where outfit folders could not be renamed.
...
Outfit folders are a type of system folder whose details are allowed to change.
2012-05-21 19:38:43 +01:00
0db60eea85
Improve locking of RegionCombinerModule.m_regions
2012-05-19 04:59:36 +01:00
5759313f7f
Add size of region to OAR control file. Megaregions (sw root OARs when saved) will have a size larger than 256x256
...
Not yet read. Do not rely on this information yet, it may change.
2012-05-19 04:56:47 +01:00
824a3a114b
refactor: Add RegionConnection.PosX and PosY to return position in meters rather than copy/pasting the necessary calculations in lots of places.
2012-05-19 04:22:30 +01:00
fb8705dd4d
refactor: Rename connection paramaters from "conn" and "regionConnections" so that it's easy to tell whether they refer to the root region connection or a new region connection
2012-05-19 04:01:05 +01:00
d7f90dee1c
Correct some log messages in RegionCombinerModule about the position of the root region of a megaregion relative to an added region
2012-05-19 03:56:25 +01:00
4e5ac27928
Make the megaregion total area given to the physics module accurate instead of over-inflated.
...
This was previously over-inflated because adding a region to the NE of the root region resulted in double counting of regions already added.
An accurate extent will also be necessary for other purposes.
2012-05-19 03:45:58 +01:00
3f2a727b6d
Remove recent IRegionCombinerModule.IsMegaregion(). In theory, there can be more than one megaregion in a simulator, separated by water.
...
Rename IsRootRegion() to IsRootForMegaregion()
2012-05-19 03:17:21 +01:00
26dfcf5395
Add some method doc to RegionCombinerModule. Clean up log messages.
2012-05-19 03:07:24 +01:00
33247c8d85
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-19 02:46:37 +01:00
2b60a5c5d6
Add is_megaregion flag into oar control file. Not currently read - for future use. Please do not rely on this remaining here.
...
An adaptation of part of Garmin's patch from http://opensimulator.org/mantis/view.php?id=5975 , thanks!
Flag only written if the SW corner OAR is saved - this is the only one that captures object data presently (though not land or terrain data).
This adds an IRegionCombinerModule interface and the necessary methods on RegionCombinerModule
2012-05-19 02:45:17 +01:00
247a56593f
Further refinement on properties
2012-05-18 20:02:32 -04:00
e338c15433
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-18 19:34:19 -04:00
895dadbdbd
Cleanup + change properties to set fields with private set : Thanks Justin for the tip.
2012-05-18 19:34:12 -04:00
fc5d274229
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-18 23:56:44 +01:00
896cd45939
Fix issue where a new outfit folder is not created when a new outfit is saved if there are no previous outfits
...
This was because AddFolder() was disallowing these though they are legal.
2012-05-18 23:55:18 +01:00
c05f87b50c
Provide Telehub setting to allow use of landmarks
...
Setting to allow use of landmarks to override telehub routing. Default is off.
2012-05-18 17:51:38 -04:00
0147dc6302
Fix build break. Comment out EQG deregister/register logging.
2012-05-18 03:50:23 +01:00
45af29291a
Add level 2 debug eq logging which logs event queue polls.
...
Refactor: eq message logging into common method.
2012-05-18 03:43:36 +01:00
565c73751c
Invoke log4net configurator in pCampBot.exe in order to get OpenSim sylte logging
2012-05-18 00:49:39 +01:00
6501b1b1bb
refactor: move EventQueueGet path generation into common method. Rename some local variables in line with code conventions. Add commented out EQG log lines for future use.
2012-05-18 00:38:29 +01:00
b18c8c8e78
Don't eagerly clear frame collision events when physics actors subscribe and unsubscribe from collisions, in order to avoid a race condition.
...
Since this is done directly from ScenePresence, it can lead to a race condition with the simulator loop.
There's no real point doing it anyway since the clear will be done very shortly afterwards by the simulate loop and either there are no events (for a new avatar) or events don't matter (for a departing avatar).
This matches existing behaviour in OdePrim
2012-05-17 23:59:43 +01:00
521ad080f1
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-17 23:56:36 +01:00
4d34763f8c
Check agent limit against root agent count rather than both root and child agents
...
From sl docs such as http://community.secondlife.com/t5/English-Knowledge-Base/Managing-Private-Regions/ta-p/700115
agent should apply to avatars only.
This makes sense from a user perspective, and also from a code perspective since child agents with no physics or actions take up a fraction of root agent resources.
As such, the check is now only performed in Scene.QueryAccess() - cross and teleport check this before allowing an agent to translocate.
This also removes an off-by-one error that could occur in certain circumstances on teleport when a new child agent was double counted when a pre-teleport agent update was performed.
This does not affect an existing bug where limits or other QueryAccess() checks are not applied to avatars logging directly into a region.
2012-05-17 23:33:26 +01:00
2af11fea37
Merge branch 'master' of /home/opensim/lib/osgrid/opensim
2012-05-17 00:49:33 -04:00
295bb3227d
Force the default Telehub router if no matches are found in the config.
2012-05-17 00:47:19 -04:00
c45b5a3d1c
minor: improve method doc for TestSameSimulatorSeparatedRegionsCreateAgentFails()
2012-05-17 03:27:05 +01:00
d19fb6fb0c
Add regression TestSameSimulatorSeparatedRegionsCreateAgentFails()
2012-05-17 03:12:31 +01:00
f0c9cb8dc0
Comment out TestSameSimulatorSeparatedRegionsQueryAccessFails() regression test logging accidentally left in
2012-05-17 01:34:04 +01:00
6b6a00a3d5
minor: Remove redundant EstateOwner != UUID.Zero check in IsAdministrator because checking EstateOwner == user
...
Due to an earlier check we already know that user != UUID.Zero so if EstateOwner == UUID.Zero, EstateOwner == user can never be true
2012-05-17 01:30:50 +01:00
bdcf2d1348
Add regression TestSameSimulatorSeparatedRegionsQueryAccessFails()
2012-05-17 01:27:59 +01:00
e444cb9da4
Remove redundant "Teleport failed:" from reason when QueryAccess fails for the destination simulator. This part of the string is already provided by the viewer.
...
Also adds more reason logging for diagnostics when teleports are refused/fail.
2012-05-17 00:33:04 +01:00
23ae24b406
Route OAR SOG loading through the common SceneObjectSerializer.FromXml2Format() rather than the functionally identical but buggy Xml2ToSOG().
...
Remove buggy Xml2ToSOG().
2012-05-16 00:10:42 +01:00
e644e34545
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-15 23:47:42 +01:00
1b5ce8c10e
Fix issue where loading OARs could sometimes result in link numbers being reordered.
...
This was because the parts in scene objects were sometimes not serialized in link order.
This is perfectly fine since the parts still have the right link numbers, but an extra fix to adjust for this
had not been done in the SerialiserModule methods that OAR loading used.
Add regression test for same.
Addresses http://opensimulator.org/mantis/view.php?id=5948 , http://opensimulator.org/mantis/view.php?id=5749
2012-05-15 23:43:59 +01:00
02f3b116c6
Allow use of regular expressions in "show object name", "show part name" and "delete object name" console commands if --regex switch is used.
...
Deleteing objects by name, creator uuid or owner uuid now requires confirmation to avoid accidental deletion.
2012-05-15 23:42:49 +01:00
65e1d7b2d7
Guard against null root part on SQLite. This really needs to be fixed so SQLite
...
loads roots before children like MySQL does.
2012-05-15 03:16:12 +01:00
069bcd45e5
Try to fix sqlite breakage
2012-05-15 02:27:21 +01:00
e7819ce909
Port Avination's collision fixes to core.
2012-05-15 01:02:38 +01:00
52a32878a9
Save the Telehub and its Spawn Points in the OAR
2012-05-14 19:59:45 +01:00
af6c85308a
minor: add explanative comment to 'missing baked texture' logging commonly seen on inter-simulator teleports where avatar baked textures are not available from the asset service.
2012-05-14 18:57:42 +01:00
deeac69312
minor: comment out individual attachment transfer log messages for now
2012-05-14 18:48:40 +01:00
c2aa3b90d9
Set the agent in transit teleport flag at the first available opportunity (i.e. when IsInTransit() was being checked) to close down a race condition.
...
On EntityTransferModule.DoTeleport() there was an IsInTransit() check to prevent multiple simultaneous teleport attempts.
However, the SetInTransit() was only performed later on, which left a window in which multiple threads could pass the IsInTransit() check.
This has been seen in the field and the results aren't pretty.
This commit effectively combines the IsInTransit() and SetInTransit() checks so there is no such window.
More failure cases are made to to call ResetInTransit() to adjust to this move.
2012-05-14 18:36:26 +01:00
42557d7d4c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-14 18:33:20 +01:00
fad557485c
Add more region information to some teleport related logging
2012-05-14 18:06:48 +01:00
171480f235
Merge branch 'master' of /home/opensim/src/OpenSim
2012-05-13 17:40:03 -04:00
b80db81cdd
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-13 17:39:05 -04:00
30a272ba31
Modifications for SMTP in OpenSimulator. Email size limit was fixed (was out of step with documentation at 1024, so boosted to 4096). Added configuration item for maximum email size. Redundant sleep inside email module was fixed (LSL Api was already sleeping). Added sleep time configuration item for snooze between email sending for LSL Api. Added two new configuration items (email_max_size and email_pause_time) into the example OpenSim.ini, plus fixed a spelling error (llimits) and odd tabbing.
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-13 17:34:20 -04:00
7c229c8b81
Add configurable SpawnPointRouting
...
Will use one of three selected methods to route avatar landing
points when using Telehubs. The setting is in [Startup] using
SpawnPointRouting = closest/random/sequence
closest: The default setting. Routes avatar to the nearest SpawnPoint
to the location.
random: Picks random SpawnPoints to land the avatar.
sequence: Follows a sequence to place the avatar on the next available
SpawnPoint location
Conflicts:
OpenSim/Region/Framework/Scenes/Scene.cs
2012-05-13 17:20:54 -04:00
9d66792c2a
Fix mono compiler warning.
...
Last jenkins failure looked like a glitch.
2012-05-12 03:04:47 +01:00
8b958e7e74
Revert "Save the Telehub and its Spawn Points in the OAR"
...
This reverts commit b0b7b45b94
2012-05-12 02:36:56 +01:00
b0b7b45b94
Save the Telehub and its Spawn Points in the OAR
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-05-10 22:56:37 -04:00
480216f50f
Print out more information on connecting bots
2012-05-11 02:38:29 +01:00
f231ac39de
Increase minimum period between bot actions to 3 seconds, so that teleport doesn't fall under the minimum 2 second limits that clients take to process it
2012-05-11 02:23:18 +01:00
9c392f6a68
Stagger multiple bot logins by 5 seconds to make this part of the test more 'realistic'
...
TODO: Need to make this value configurable by a command line parameter to pCampbot
2012-05-11 02:05:32 +01:00
0ddf3c5289
Do bot startup on another thread so console is responsive during this process
2012-05-11 01:56:00 +01:00
93b615c51d
Do each bot shutdown on its own threads to prevent one slow shutdown holding up all the rest.
...
This does increase the aggressiveness of shutdown
Also prevents the bot list being locked for a long period, which was preventing commands such as "show bots" from working during shutdown
2012-05-11 01:37:03 +01:00
dc39ec82fa
Change bot.IsConnected to be ConnectionState with Disconnected, Connecting, Connnected and Disconnecting states
2012-05-11 00:53:21 +01:00
ab4e6a02a5
If a bot is not connected, show region name "(none)" instead of throwing an exception in the "show bots" command of pCampbot
2012-05-11 00:37:20 +01:00
903cff9264
Add ConsoleTable framework class for future uniform formatting of console output tables.
...
Still subject to change - if you use this be prepared to change your output code if/when the methods change.
Make new "attachments show" command use this.
2012-05-10 23:47:39 +01:00
abc029d1f4
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-10 23:43:38 +01:00
bce3e7cb06
Add "attachments" show console command that will show the server's record of which attachments an in-scene avatar has.
...
For debugging purposes.
2012-05-10 22:48:03 +01:00
117c183fde
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-10 14:43:02 -07:00
f374b63ac8
Add even for terrain tainting and synchronize terrain module with physics scene before physics simulation step rather than after
2012-05-10 14:42:46 -07:00
de44734fe9
Saving estate state is really slow (relatively) and it gets
...
completely rewritten every time a region starts up. This
makes the data write only when the data was not already
read from the database.
There is a still a major race condition whenever two regions
share the same estate data, but at least it won't be triggered
on startup.
2012-05-10 09:08:40 -07:00
d8a78374aa
Where necessary, rename OpenSim/Services/Connectors/*.cs files to reflect the actual class names.
...
This is usually because the file name was singular (*Service*) but the class name was plural (*Services*).
This is to make configuration easier rather than having to look in the c# code itself to find the slightly different name of the connector.
This does not affect existing configuration since the files are being renamed rather than the classes.
2012-05-09 23:25:01 +01:00
6987aef38d
Improve logging on the prim inventory script asset request path for future use.
...
This adds name and description of the request handler to http request logging when DebugLevel >= 1
2012-05-09 23:12:30 +01:00
e813f41478
Escape and unescape xml element names if necessary in ServerUtils.BuildXmlData() and ParseElement()
...
If AvatarService appearance data is retrieved over the network, then ServerUtils was attempting to transfer names such as "Wearable 0:0" directly to xml element names, resulting in an exception.
Space is not valid in xml element names. Neither is : in this case since the intention is not to namespace. Using names directly as keys is not a good idea.
To get around this problem this patch escapes and unescapes the element names as appropriate.
This has no impact on existing xml (since it had to be valid in the first place) but allows AvatarService data to be used over the network.
Setting appearance (from simulator to AvatarService) did not suffer this problem since the values are passed in the query string which is already properly escaped.
2012-05-09 21:11:14 +01:00
61e99bcdcb
Mantis 6015 new LSL function llGetAgentList.
...
Details in the lsl wiki
2012-05-09 00:14:24 +01:00
e5dbb652d5
Remove physics actor related race conditions in SetVehicleFlags() and SetPhysicsAxisRotation()
...
sop.PhysActor can currently become null at any time.
2012-05-09 00:11:10 +01:00
3bc5620d74
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-08 16:06:02 -07:00
20952c75c5
Trigger event when scene presences are updated
2012-05-08 16:05:34 -07:00
c21c9e13ef
Mantis 1456 same region teleport of a sitting avatar.
...
Region to region was fixed some time ago in EntityTransferModule.
This applies the same fix for same region teleports.
2012-05-09 00:02:13 +01:00
ef279c5a62
Add automated TestllBreakLink()
2012-05-08 23:36:23 +01:00
c0658a102e
Add automated TestllCreateLink()
2012-05-08 23:29:51 +01:00
6406d5a5b9
refactor: Eliminate local id parameter from api initialize.
...
This is always available from m_host.LocalId
2012-05-08 23:20:27 +01:00
01b78235db
Instead of constantly looking up unchanging self item in script code, pass in self item on initialization.
2012-05-08 23:05:01 +01:00
abbd050a13
Perform SceneGraph.DuplicateObject() under existing m_updateLock already used for link and delinking, in order to avoid race conditions.
...
DuplicateObject() relies on source object having correct link numbers for the duration of the dupe.
Both link and delink can change link numbers such that they are not consistent for short periods of time.
2012-05-08 21:31:35 +01:00
5d1d47e1f9
Revert "Better error handling if Load OAR or Save OAR fail"
...
This reverts commit 65c88b2ff4
2012-05-07 20:01:17 +01:00
15844da3af
Log the full exception when errors occur in BaseHttpServer
2012-05-07 19:56:00 +01:00
65c88b2ff4
Better error handling if Load OAR or Save OAR fail
2012-05-07 19:07:38 +01:00
a82dc263ab
For osGetGridNick(), osGetGridName(), osGetGridLoginURI() and osGetGridCustom(), try to read from the [GridInfoService] section on standalone rather than [GridInfo]
...
[GridInfoService] is the section that's actually in bin/config-include/StandaloneCommon.ini.example
2012-05-07 19:05:21 +01:00
5053506d88
refactor: Instead of performing a ScenePresence lookup twice over LocateClientObject() and GetClientScene(), do the lookup just once in LocateClientObject()
2012-05-07 18:27:33 +01:00
cdf97ab3a6
Fix a bug in FriendsModule.StatusNotify() where all subsequent friends would not be notified once a non-local friend was found.
2012-05-07 17:21:45 +01:00
4032455332
add a null check for Primitive.Sculpt in PrimitiveBaseShape constructor for OpenMetaverse.Primitive object
2012-05-07 00:33:50 -07:00
4186fa10f0
remove default values from prior commit since mono cant deal with them
2012-05-07 00:08:56 -07:00
b697d0e895
add OS_NPC_RUNNING option to osNpcMoveToTarget() to allow running speed for moving NPCs
2012-05-06 23:54:50 -07:00
b60f51dafc
Stop llSetPos from sending one update per child prim
2012-05-06 19:21:54 +01:00
01b00ad0d5
Fire the scripting changed event with CHANGED_OWNER when an object that has changed owners is rezzed.
...
This needs to occur after the script is resumed rather than before, when the event is just dropped.
Addresses http://opensimulator.org/mantis/view.php?id=5890 and http://opensimulator.org/mantis/view.php?id=5952
2012-05-05 00:29:14 +01:00
e18686528e
Use the more efficient HashSet instead of List for FlotasmAssetCache.m_CurrentlyWriting
2012-05-04 23:03:33 +01:00
dec6ad2933
Don't try and update the access time of a file that is actively being cached.
...
This may cause IOErrors on Windows.
Aims to help with http://opensimulator.org/mantis/view.php?id=6003
2012-05-04 22:57:33 +01:00
da4819a170
Temporarily add debug log lines to lsl url request and release
...
To help with http://opensimulator.org/mantis/view.php?id=5993
2012-05-04 22:11:25 +01:00
c84ef57e52
minor: remove mono compiler warning
2012-05-04 21:04:42 +01:00
92fde6ed26
Mantis 60004 problems with damage and llSetDamage. In damage enabled areas this patch - Deletes any objects that have damage set > 0 that deliver that damage to an avatar Stops Gods receiving damage, Stops volume detect objects causing damage Deletes NPCS when their helth reduces to zero Gradually "heals" damage to an avatar Resets health on going to a non damage area
2012-05-04 21:01:09 +01:00
6096a1f30e
Change LongCallTime on WebUtil to 3000, to match the time where request handling is considered "slow".
...
This may be the wrong thing to do but stops lots of log spam in HG setups now that the monitoring is extended to other outgoing calls.
LongCallTime may need to be made configurable.
2012-05-04 20:53:30 +01:00
e83bc049df
refactor: Rename new DeleteFoldersEx/PurgeFoldersEx methods to DeleteFolders/PurgeFolders overloads as previously discussed with Oren - I think this makes more sense on balance
...
These overloads are not publicly available on core connectors or IInventoryService.
2012-05-04 20:37:21 +01:00
ad23774433
Allow deleting folders even if they're not in the Trash
...
The functions DeleteFolders() and PurgeFolder() still work as before, i.e. they only allow deleting folders that are in the Trash. However, the functions DeleteFoldersEx() and PurgeFolderEx() can now be used to delete any folder.
2012-05-04 20:30:46 +01:00
cccef2e56d
Calculate the Daylight Savings Time information sent to the viewer based on US Pacific Standard Time rather than whatever timezone the login server is set to.
...
This is because the viewer doesn't receive a timezone from the server but bases its displays on Pacific Standard Time.
However, it still expects to receive notification from the server as to whether or not Daylight Savings Time for PST is in operation.
This commit introduces a new DSTZone setting in the [LoginService] config setting that accepts a list of timezone names valid across different platforms to calculate Pacific DST.
If you need the old behaviour of calculating DST based on the local timezone of the server running the login service, then please override DSTZone with "local".
A mailing list announcement will be made later.
Thanks to Olivier Van Helden and Gudule Lapointe for determining this behaviour and providing this patch.
From http://opensimulator.org/mantis/view.php?id=5972
2012-05-04 19:21:43 +01:00
fb99ee6774
minor: Tweak BaseHttpServer message to make it clear that this relates to slow handling of inbound requests.
2012-05-04 01:16:56 +01:00
c9faf0df74
Extend 'slow' request logging to other server outbound requests (forms, rest, async rest) as well as the existing logging on outbound OSD requests.
...
Also prints out the first 100 chars of any slow request data since this can contain useful info (such as agent ID).
2012-05-04 01:12:56 +01:00
c221eaf0b0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-05-03 22:39:04 +01:00
fcd5b0817b
Reinsert a 2000ms delay before closing a no longer required agent on the source region after teleport to resolve Imprudence teleport problems.
...
Viewers 1 and 3 are fine with doing this immediately. However, Imprudence has a small delay (<200ms, >500ms) after receiving the AgentCompleteMovement reply packet on the destination region before regarding that region as the currnet region.
If Imprudence receives a DisableSimulator in this period, it quits.
We are not restoring the full 5000ms delay since this brings back a bug where teleports permanently fail if an avatar tries to teleport back too quickly.
This commit also sends the AgentCompleteMovement packet to the client before telling the source region to release its old agent, in order to further cut down any possibility of the DisableSimulator being recieved before the AgentMovementComplete.
2012-05-03 22:30:36 +01:00
100e4ca67e
Fixes Mantis #5999 . llSetLinkPrimitiveParams with PRIM_BUMP_SHINY did cause a runtime error.
2012-05-03 19:00:09 +02:00
bf5f8b54ae
Remove the somewhat misleading logging of the string length of some unknown requests, as this appeared to be some kind of numbered error code.
...
This brings these messages into line with similar messages that did not do this.
2012-05-03 02:22:06 +01:00
9ffc2c1062
minor: resolve some mono compiler warnings
2012-05-03 01:56:24 +01:00
231a3bf147
Implement optional name and description on http stream handlers so that we can relate a slow request to what the handler actually does and the agent it serves, if applicable.
...
This is most useful for capabilities where the url is not self-describing.
2012-05-03 01:45:49 +01:00
40f3c24562
Comment out the five second sleep in etm.DoTeleport() if the old agent needs to be closed because it is no longer in the child's view distance.
...
This sleep appears unnecessary since a sleep has already occurred in WaitForCallback() whilst waiting for the destination region to notify of teleport success.
There are no async operations between this sleep and the WaitForCallback()
If this sleep is present, then teleporting back to the source region within 5 seconds results in a disconnection.
If this sleep is commented out then teleporting quickly back and forth between two simulators appears to work without issue.
Tested on standalone, local grid and distributed grid.
Please revert if there's something that I've missed.
2012-05-01 23:49:02 +01:00
a29f7f7551
Remove some test code that accidentally crept in with 9d2e1c67
2012-05-01 23:25:30 +01:00
9d2e1c67a8
Add regression test for teleporting between neighbouring regions on the same simulator
...
This adds a non-advertised wait_for_callback option in [EntityTransfer]. Default is always true.
Teleport tests disable the wait for callback from the destination region in order to run within a single thread.
2012-05-01 23:14:12 +01:00
5786521103
Move max teleport distance check down into etm.DoTeleport() since this should apply to all teleport calls, not just those through Teleport()
2012-05-01 18:38:46 +01:00
37dd174697
refactor: Split most of EntityTransferModule.Teleport() into its same region and different region teleport components.
...
DoTeleport() now retrives IEventQueue itself rather than requiring it to be passed in.
2012-05-01 17:52:30 +01:00
b678ea18b2
Create TestHelpers.EnableLogging() and DisableLogging() to turn logging on and off within tests.
...
This makes *.Tests.dll.config files no longer needed, hence deleted.
2012-04-30 18:44:22 +01:00
9c2a73b61e
llGenerateKey implementation. Creates a random UUID I.E: UUID.Random().ToString();
...
Signed-off-by: TBG Renfold <tbg.renfold@g2mv.co.uk>
2012-04-30 17:36:49 +01:00
d0598c63f3
refactor: Simplify by combining SafeSendControlsToScripts() from fe8e835 into SendControlsToScripts() (instead of SendControlToScripts()).
2012-04-30 17:33:08 +01:00
fe8e835bfc
Fixed: scripted controls didn't work if the avatar was sitting down
...
This fixes a bug introduced in 6473674bbf
2012-04-30 17:18:15 +01:00
4ad45934c6
If there are no new prim items to store then don't bother opening the MySqlConnection only to do nothing with it.
2012-04-30 16:00:31 +01:00
522eff6138
Consistently use using() to make sure we dispose of used MySqlCommands where this is not already being done.
2012-04-30 15:54:35 +01:00
8380166251
Comment out debug [ASYNC DELETER] messages for now.
2012-04-28 00:39:40 +01:00
cd755fe598
Remove mono compiler warning. Adjust message log to error from info
2012-04-28 00:31:11 +01:00
133f05dc41
Add text about using double quotes to surround console command arguments containing spaces to "help" text.
...
e.g. show object name "My long object name"
2012-04-28 00:29:08 +01:00
2bad430ed8
Put scene object related console commands into new "Objects" help category rather than "Regions"
2012-04-28 00:08:04 +01:00
ab71779221
Revert "Revert "Implement bulk inventory update over CAPS (not recursive by design,""
...
This reverts commit a90b0e302c
2012-04-27 23:54:45 +01:00
737e177163
Revert "Log the full exception when errors occur in BaseHttpServer"
...
This reverts commit e31e7c68c8
2012-04-27 23:46:46 +01:00
a90b0e302c
Revert "Implement bulk inventory update over CAPS (not recursive by design,"
...
This reverts commit 6e7f13a72d
2012-04-27 23:46:33 +01:00
d25469f66e
Add flags information (phantom, physics, etc.) to "show object" and "show part" console commands
2012-04-27 23:38:25 +01:00
e31e7c68c8
Log the full exception when errors occur in BaseHttpServer
2012-04-27 21:52:04 +01:00
6473674bbf
Fixed: custom walking animations didn't stop when the avatar stopped walking.
...
This happened because the scripts were notified about control changes (e.g., the user stopped pressing the Forward key) when the animation was still WALK, so the script didn't stop the walking animation. Fixing this required: a) Update the movement animation *before* notifying the script; b) Add locking to prevent clashes with the Heartbeat thread (which also updates the animations); c) Handle the case of a user who stops walking just as the avatar is in the air: the avatar should STAND in that case, not WALK.
This reverts commit feef1dd732
2012-04-27 20:47:02 +01:00
9622e8ac72
If a Grid God teleports then include the Godlike teleport flag. This can affect the starting position in the destination region.
2012-04-27 20:22:35 +01:00
37d770f814
Use DotNetZip to compress OARs and IARs.
...
DotNetZip provides much better compression than standard .NET.
2012-04-27 19:46:31 +01:00
e39e4f6bfb
minor: style adjustments in SensorRepeat, mainly related to patch from stoehr
2012-04-27 19:40:19 +01:00
b35a1d5681
Fixing wrong position of llSensor, SensePoint wasnt following the rotation of the root prim.
2012-04-27 19:31:50 +01:00
9bc94c502a
MapImageService: changed the event at which the map tiles are uploaded, because they were being uploaded before the region was registered with the grid
2012-04-27 11:05:40 -07:00
a9dbe39319
MapImage security issue. Compare strings instead of IPAddresses.
2012-04-27 10:39:20 -07:00
292752bb78
MapImage security issue: better error messages
2012-04-27 10:22:43 -07:00
ac64fe03d8
Amend to last commit: account for the existence of proxies.
2012-04-27 09:59:46 -07:00
2970a18e54
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-27 09:26:14 -07:00
c84f63f4dc
Minor change in error message (HG teleport failures)
2012-04-27 09:24:50 -07:00
e4e754ee93
MapImageService: added an additional security check for OSGrid and other grids like it.
2012-04-27 09:23:56 -07:00
07e62df558
Add regression test for teleporting an agent between separated regions on the same simulator.
...
This involves a large amount of change in test scene setup code to allow test scenes to share shared modules
SetupScene is now an instance method that requires an instantiation of SceneHelpers, though other SceneHelpers methods are still static
May split these out into separate classes in the future.
2012-04-27 00:58:54 +01:00
8a65f5a70d
OSSL: Removed check for CanRunConsoleCommand() in osKickAvatar.
...
OSSL permissions are now controlled in OpenSim.ini.
2012-04-26 22:53:13 +01:00
0da8fe3124
Refactored how asset/inventory types are associated with content types: gathered all the knowledge into a single class. Added the Mesh content type.
2012-04-26 22:49:14 +01:00
ee13d817f1
When creating an OAR, objects where the user is the Creator are always included, regardless of their permissions.
...
The purpose of the permission checks is to prevent the unauthorized copying of assets, but users can always copy assets that they created.
2012-04-26 22:41:31 +01:00
cb6791fb30
Tweak log messages on local region to region teleport path to help with problem resolution.
2012-04-26 22:35:25 +01:00
d19aa9e792
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-26 21:54:50 +01:00
2542ca2a49
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-26 16:40:36 -04:00
fba802bb03
Merge branch 'master' of /home/opensim/var/repo/opensim
2012-04-26 16:13:47 -04:00
b8114d2b67
Add a version of osNpcSay that takes a channel number Mantis 5747
...
osNpcSay(UUID npc, string message) left untouched
New functions:-
osNpcSay(UUID npc, int channel, string message)
osNpcShout(UUID npc, int channel, string message)
osNpcWhisper(UUID npc, int channel, string message)
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-04-26 16:13:29 -04:00
ca228c4770
Comment out old Scene.HandleLogOffUserFromGrid() to reduce client closing analysis complexity
2012-04-26 16:20:53 +01:00
f49912f92a
minor: Add more detail to unauthorized caps client message
2012-04-26 16:10:24 +01:00
b0cbf16c19
minor: Add region name to dropped inbound packet message
2012-04-26 16:04:49 +01:00
4c4ffb9868
Add request verb and url to error messages in WebUtil that lack this.
...
Make exception printing consistent across windows and mono.
2012-04-26 00:43:31 +01:00
e52fe03fff
minor: Add avatar name to removing agent log message
2012-04-26 00:42:37 +01:00
74dbfe6bb5
Comment out avatar move to target message for now.
2012-04-25 23:46:42 +01:00
133370f158
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-25 11:57:29 -07:00
a2d544c938
Add a configuration switch to turn on/off the use of the trash
...
folder when deleting objects from a scene. The use of the trash
folder causes assets to be created and stored everytime you delete
an object from the scene (slows down the delete and adds mostly useless
assets to your database).
Default is on (use the trash folder) which is the standard behavior.
2012-04-25 11:54:57 -07:00
88553bb884
Port Avination link order to make OpenSim behave like SL. Make Primstar scripts work. Fixes Mantis #5990
2012-04-25 19:09:22 +01:00
1afae01311
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-25 09:52:44 -07:00
bec100a662
Add try/catch around Json script method registration to avoild some issues
...
with .NET 3.5 vs 4.0 differences.
See http://opensimulator.org/mantis/view.php?id=5971
2012-04-25 09:51:30 -07:00
7aa25c6762
Slight rewording of output messages.
2012-04-24 22:40:07 -07:00
fd281ded3f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-24 22:17:52 -07:00
cf1c34605b
HG: Moved User-level code down to the HGEntityTransferModule where it belongs.
2012-04-24 22:17:10 -07:00
550ff3b4da
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-04-25 04:01:55 +01:00
3be3189ee0
Commit the avination Teleport() methods (adaptedto justincc's changes)
2012-04-25 04:00:01 +01:00
af86e2939c
zero out SP velocity before calling SP.Teleport(), as the client expects (though this is also effectively done by physics at the moment)
2012-04-25 03:47:26 +01:00
683cfc6f82
refactor: Combine ScenePresence.Teleport() and TeleportWithMomentum()
...
These are identical apart from setting Velocity = zero, which has no practical effect anyway since this is zeroed when the avatar is added back to the physics scene.
2012-04-25 02:07:55 +01:00
a65ca24701
Add regression test TestSameRegionTeleport()
2012-04-25 01:51:40 +01:00
f24289c47f
Comment out AvatarService.SetAvatar debug log line for now
2012-04-25 01:09:23 +01:00
6b299a4287
Comment out some debug ATTACHMENTS log messages for now.
2012-04-25 00:52:33 +01:00
39a6d7cab4
Comment out the noisier AVFACTORY log messages for now.
...
Permanently comment out warnings about ScenePresence not being found - this is entirely expected if the avatar has alraedy logged out or left the scene.
2012-04-25 00:47:32 +01:00
0f470326aa
Improve teleport log debug and error messages to tell us who is teleporting.
2012-04-25 00:19:38 +01:00
54d5ff6774
Go back to always using the local timezone for now - not all machines have US/Pacific or Olsen Amercia/Los_Angeles and this introduces variability that the server operator cannot control
...
Please see http://opensimulator.org/mantis/view.php?id=5972 soon for more comments.
2012-04-24 23:00:50 +01:00
ef1668adb3
Revert "Refactored how asset/inventory types are associated with content types: gathered all the knowledge into a single class. Added the Mesh content type."
...
This reverts commit d3a4d67a20
2012-04-24 21:42:32 +01:00
2f398231ac
Minor improvements to logging
...
Eliminated an extra newline in the console if the log line doesn't contain a category (example of a category: "[ASSETS]").
2012-04-24 21:38:09 +01:00
d3a4d67a20
Refactored how asset/inventory types are associated with content types: gathered all the knowledge into a single class. Added the Mesh content type.
2012-04-24 20:52:18 +01:00
da5fd53702
Fixed problem with MySQL: it was possible for one thread to use an incomplete list of column names if another thread was creating the list at the same time. Now this is thread-safe.
2012-04-24 20:49:28 +01:00
c70e85a327
When reading a region, use null objects to represent NULL fields.
...
Previously NULL fields were converted to an empty string due to the use of ToString(). But if the field was an Int (e.g., "locZ"), then the subsequent attempt to convert an empty string to an int caused an exception. Now the field is null so we don't try to convert it, so there's no exception.
2012-04-24 20:46:31 +01:00
6011bfa5e3
OSSL: fixed the threat level check for osParseJSONNew
2012-04-24 20:41:29 +01:00
cbe889e10b
minor: formatting changes to top of LLLoginResponse.SetDefaultValues(), chiefly some break up of the long line.
2012-04-24 20:30:19 +01:00
0e3053e4c9
DST settings to match client default Pacific Time (mantis #5972 )
2012-04-24 20:22:34 +01:00
c6f30e044b
Restore _parent_scene.actor_name_map[prim_geom] = this; accidentally removed from ODEPrim.SetGeom.
...
This occurred in 7a574be3fdhttp://opensimulator.org/mantis/view.php?id=5988
2012-04-24 20:15:10 +01:00
fd27988978
Changed the Map-related messages from Info to Debug. They're debug messages.
2012-04-23 21:29:18 -07:00
6c21e15cb9
Add online/offline indicator to "friends show" region console command.
...
Improve output table formatting.
2012-04-24 00:32:01 +01:00
40e37d8b78
Add osForceAttachToAvatar() and osForceDetachFromAvatar()
...
These behave identically to llAttachToAvatar() and llDetachFromAvatar() except that they do not enforce the PERMISSION_ATTACH check
Intended for use in completely controlled dedicated environments where these checks are more a UI hinderance than a help.
Threat level high.
2012-04-24 00:03:57 +01:00
b798b32b19
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-23 22:54:11 +01:00
1f8d1bcdcf
Replace common code to fetch self inventory item (as opposed to uuid) with GetSelfInventoryItem()
...
However, at some point it would be far more convenient to receive the TaskInventoryItem in the constructor rather than just the item UUID, so we don't have to constantly refetch our self item.
2012-04-23 22:52:46 +01:00
60065f06b3
refactor: Replace calls to InventorySelf() with existing m_itemID in LSL_Api
...
There's no point look up an item ID that we already have.
2012-04-23 22:23:47 +01:00
679da63da6
Mantis 5977 Corrections to llRegionSayTo
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2012-04-23 07:16:33 -04:00
49ed68e98c
refactor: simply some properties code in BasicPhysicsPlugin
2012-04-22 20:28:12 +01:00
58c890df5d
Make TestSetPhysicsSinglePrim() actually add the object to the scene in order to test more code paths.
2012-04-22 20:03:34 +01:00
8205fe79ce
Fix bug where setting phantom on a prim would result in a server log message rather than setting phantom.
...
This was an oversight when removing some race conditions from PhysicsActor setting recently.
Regression tests extended to probe this code path.
Extending regression tests required implementation of a BasicPhysicsPrim (there was none before). However, BasicPhysics plugin is still of no current practical use other than to fill in as a component for other parts of regression testing.
2012-04-22 19:51:51 +01:00
ae2b8f7007
Comment out spurious Body != IntPtr.Zero code after disableBody(), since disableBody() sets Body == IntPtr.Zero on all code paths.
2012-04-21 03:42:54 +01:00
f609594595
refactor: Simplify ODEPrim.AddChildPrim() by returning early where appropriate.
2012-04-21 03:23:51 +01:00
77a7de87e1
Add test for setting physics in a linkset
2012-04-21 02:45:16 +01:00
d5c724e5b8
Add regression test for prim status when root prim in a new linkset is non-physical
2012-04-21 01:51:57 +01:00
9ac48b2aff
Fix a bug where linking a non-physical prim with a physical prim as root would make the non-physical prim phantom rather than part of the physics object.
...
On region restart, the whole object would become physical as expected.
Observed behaviour from elsewhere is that all prims in a new linkset should take on the status of the root prim.
Add regression test for this behaviour.
2012-04-21 01:43:09 +01:00
17bf2a62db
Add test for correct physics status on linking two physics objects
...
Also fixes last build break.
2012-04-21 01:09:42 +01:00
71900968b2
refactor: extract common setup code in SceneObjectStatusTests
2012-04-21 01:01:24 +01:00
ae789f6c16
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-21 00:55:27 +01:00
06552f217e
Add TestSetPhysics() to SOP status tests
2012-04-21 00:54:48 +01:00
7a574be3fd
Remove redundant prim_geom != IntPtr.Zero checks in ODEPrim.
...
prim_geom == IntPtr.Zero only before a new add prim taint is processed (which is the first taint) or in operations such as scale change which are done in taint or under lock.
Therefore, we can remove these checks which were not consistently applied anyway.
If there is a genuine problem, better to see it quickly in a NullReferenceException than hide the bug.
2012-04-21 00:12:07 +01:00
c8307cdf1e
Improve bitmap disposal to do null checks and not to potentially try disposal of uninitialized variables.
...
This issue doesn't cause the mono 2.10.5 compiler to fail but appears to cause the windows compiler to fail.
Resolves http://opensimulator.org/mantis/view.php?id=5973
2012-04-20 23:35:11 +01:00
566327a948
If a physical prim is manually moved (e.g. by a user) then set the geometry position as well as the body position
...
This is necessary to stop the moved prim snapping back to the original position on deselection if moved only once
This resolves http://opensimulator.org/mantis/view.php?id=5966
2012-04-20 23:24:24 +01:00
75f117484b
Always dispose of existing opened bitmap from file in SaveFile(), instead of simply dropping the reference if the existing file didn't contain a bitmap of the same size.
2012-04-20 03:57:22 +01:00
cba64ebc79
Explicitly dispose of bitmaps opened from files in GenericSystemDrawing and JPEG.cs
2012-04-20 03:46:33 +01:00
4ac2f839bd
Remember to dispose of the bitmap opened from a file in GatekeeperServiceConnector.GetMapImage()
2012-04-20 03:32:38 +01:00
63cda3a6d0
concerns GenericSystemDrawing.cs
...
in OpenSim\Region\CoreModules\World\Terrain\FileLoaders\GenericSystemDrawing.cs
Ln 67
Apply Justin's solution
Signed-off-by: Garmin Kawaguichi <garmin.kawaguichi@magalaxie.com>
2012-04-20 03:26:02 +01:00
f3dda2d85d
Add more exception detail to Exception and IOException throws in BaseHttpServer.HandleRequest()
2012-04-20 03:12:25 +01:00
2b98e2f106
Stop teleports from dropping tall avatars through or embedding them in the floor when lured by short avatars.
...
This involves giving the ceiling of the Z-component in a lure rather than the floor.
Ideally we would give the exact float compensating for relative avatar height but it looks like that isn't possible with the parcel id format used in lures
2012-04-20 02:50:36 +01:00
beb7b8d189
Fix a logic error in app domain creation
2012-04-18 23:23:37 +01:00
7a255efdb2
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-04-18 20:07:32 +01:00
ea73a03553
Don't re-add the assembly resolver for each script if not creating the appdomain
2012-04-18 20:01:41 +01:00
c85f9d681a
On "show part" command, show link number.
...
This replaces the Parts count which was rather pointless for a prim (it was either 1 if a child or the number of parts if the root).
This information is still avaliable on the "show object" command.
2012-04-18 00:39:39 +01:00
b430c0162c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-18 00:00:09 +01:00
859646ef5c
minor: Add some method doc. Add warnings since calling SOG link/delink methods directly rather than through Scene may allow race conditions.
2012-04-17 23:54:51 +01:00
84891930aa
clean up some more logging spam in the jsonstore modules
2012-04-17 14:23:43 -07:00
4db518b9a3
Fix the Csharp 3.0 vs 4.0 problem in JsonStore initialization.
...
Cut down on the logging spam.
2012-04-17 14:15:17 -07:00
5ff2bda587
This commit adds a new optional region module, JsonStore, that provides structured
...
storage (dictionaries and arrays of string values) for scripts and region modules.
In addition, there are operations on the storage that enable "real" distributed
computation between scripts through operations similar to those of a tuple space.
Scripts can share task queues, implement shared locks or semaphores, etc.
The structured store is limited to the current region and is not currently
persisted. However, script operations are defined to initialize a store from a notecard
and to serialize the store to a notecard.
Documentation will be posted to the opensim wiki soon.
2012-04-17 13:45:27 -07:00
4bb72c9ffe
make the namespace for the ScriptModuleComms consistent with its file system location
2012-04-17 13:45:03 -07:00
cca6b6bd0d
Add TestGetChildPartPositionAfterObjectRotation()
2012-04-17 02:14:10 +01:00
2f2181683c
Add test TestGetChildPartPosition()
2012-04-17 01:51:13 +01:00
7e1ab216e3
Move some public methods on WebStatsModule to private to reduce some static analysis complexity.
...
There's no obvious reason for these methods to be public.
2012-04-17 01:33:55 +01:00
24a0cc5261
refactor: Rename EstateSettings.IsEstateManager() to EstateSettings.IsEstateManagerOrOwner() to reflect what it actually does.
...
This makes it consistent with other parts of OpenSimulator that are treating ESTATE_MANAGER and ESTATE_OWNER as different entities.
As per opensim-dev mailing list.
2012-04-17 01:25:41 +01:00
5655239f44
Null reference in llGetObjectMass on a seated avatar.
2012-04-17 00:56:46 +01:00
e6ec83125b
Use INSERT OR REPLACE INTO sql in WebStatsModule for session update rather than separate insert and update statements
2012-04-17 00:46:43 +01:00
572440cd23
correct bug where f_invalid was being inserted on a webstats update for an existing session rather than d_world_kb
2012-04-17 00:33:23 +01:00
1bb3873338
Simplify WebStatsModule by removing the uncompleted migrations section.
...
Use "create table if not exists" instead.
Client stats data is transitory data that it is not worth migrating.
2012-04-17 00:19:36 +01:00
f213f55586
Fix bug in WebStatsModule where an exception would always be output on update if the user teleported to another region on that simulator.
...
This was because update was looking for an existing stats record unique in session id, agent id and region id.
But if the user teleports to another region then region id changes.
WebStatsModule promptly doesn't find the existing record and tries to insert a new one, but only session id is the primary key and that's still the same, which makes things go bang.
This makes the update search only on the unique session id.
This is only an issue with simulators that have multiple regions where the webstats module is enabled.
2012-04-17 00:02:58 +01:00
2c74e1bba8
Add GroupPosition and GetWorldPosition() checks to TestGetRootPartPosition()
2012-04-14 01:57:09 +01:00
da342d0b21
minor: make test names consistent
2012-04-14 01:53:40 +01:00
f61b234252
refactor: move common init code into SetUp() in SceneObjectSpatialTests
2012-04-14 01:52:16 +01:00
317aebcce6
refactor: put SOG position test in a separate TestSceneObjectGroupPosition()
2012-04-14 01:47:56 +01:00
40d01fb20b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-14 01:43:57 +01:00
3ae98611f2
Add simple RelativePosition and OffsetPosition checks to TestGetRootPartPosition
2012-04-14 01:43:03 +01:00
4bdd9d51bc
Correct whitespace error introduced by previous commit
2012-04-14 01:04:26 +01:00
4d652c7041
Missing or unimplemented LSL memory functions.
...
Implemented to behave as if scripts were LSO.
Signed-off-by: nebadon <michael@osgrid.org>
2012-04-13 17:08:00 -07:00
eeec1f32c6
Add very basic TestGetRootPartPosition() test
2012-04-14 01:01:28 +01:00
a366c05ae2
Added ability to exclude inventory items or folders when saving IAR files.
2012-04-13 23:31:12 +01:00
eced091689
Change threat level of osNpcStopMoveToTarget from Low to High to match other NPC functions, and change OSSL permissions name to osNpcStopMoveToTarget instead of osNpcStopMoveTo
...
Thanks to Oren Hurvitz for pointing out these mistakes.
2012-04-13 22:52:24 +01:00
1ad3fdb40b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-13 22:34:36 +01:00
ab7c0e7547
Remove hardcoded god requirement from osSetRegionWaterHeight, osSetRegionSunSettings and, osSetEstateSunSettings no matter the threat level.
...
Change threat level on osSetRegionSunSettings and osSetEstateSunSettings from nuisance to high to match similar functions.
If you had enabled these functions but had relied on the hardcoded god check in the code, then please adjust your OSSL permissions config.
Thanks to Oren Hurvitz for pointing this out.
2012-04-13 22:32:33 +01:00
08e509978d
Mantis 55025 Implement script time.
...
Signed-off-by: nebadon <michael@osgrid.org>
2012-04-12 18:44:00 -07:00
8be14095fe
HGFriendsModule: Type casts to fix compile error
2012-04-11 18:56:28 +02:00
1f4d3d3582
HGFriendsModule: Added optional user level based restriction to send friendship invitations to foreign users.
2012-04-11 18:52:07 +02:00
f2ede8c7e0
HGFriendsModule: add the scaffolding for supporting permissions pertaining to HG friendships. Snoopy take it from here.
2012-04-11 08:13:11 -07:00
78fd487a70
New OS scripting functions osSetTerrainTexture and osSetTerrainHeight as originally proposed in SL Jira ( https://jira.secondlife.com/browse/SVC-244 ).
2012-04-10 21:49:43 +02:00
4ab479bf58
Add uri to various log messages when region registration fails. Upgrade some debug log messages to error.
2012-04-10 20:40:59 +01:00
f9dd4ed89c
Do not timeout group member cache entry, as long as there are frequent group membership requests. These are caused by movements within the parcel boundaries.
2012-04-10 15:51:26 +02:00
78c0028179
Mantis5502 implementation of some of the new constants
...
Signed-off-by: Melanie <melanie@t-data.com>
2012-04-09 21:25:22 +01:00
0f277dfa17
Addresses mantis #5846
2012-04-08 17:54:59 -07:00
d4a370a5f2
A few more minor improvements on Suitcase inventory service.
2012-04-07 14:52:15 -07:00
0d566aa385
Better Suitcase Inventory Service.
2012-04-06 21:52:48 -07:00
806082cd6e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-06 20:35:01 -07:00
9637e50956
Moved the inventory manipulation from HGEntityTransferModule to HGInventoryAccessModule where it belongs. They need to exchange some events, so added those to EventManager. Those events (TeleportStart and TeleportFail) are nice to have anyway.
2012-04-06 20:34:31 -07:00
cce760dbfc
Rather than having a FromFolderID property on every single prim and only ever using the root prim one, store on SOG instead.
...
This reduces pointless memory usage.
2012-04-07 00:40:55 +01:00
7d8bb33c5b
Store FromItemID for attachments once on SOG instead of on every SOP and only ever using the root part entry.
...
This eliminates some pointless memory use.
2012-04-07 00:33:02 +01:00
70b5a2dace
refactor: Eliminate unnecessary SOP.m_physActor
2012-04-06 23:49:23 +01:00
33e91f1088
Implement PRIM_POS_LOCAL on llSetPrimitiveParams() and other prim params LSL functions.
...
This is the same as PRIM_POSITION
2012-04-06 23:43:03 +01:00
4a58d4c5a4
refactor: Use clearer part.ParentGroup.IsAttachment in LSL_Api.GetPartLocalPos()
2012-04-06 23:36:13 +01:00
3af1cd65f9
Fix llGetLinkPrimParams for PRIM_POS_LOCAL for child prims whether in scene or attachments.
...
Return relative position to root prim rather than 0,0,0.
Should fix same issue with llGetLocalPos()
http://opensimulator.org/mantis/view.php?id=5951
2012-04-06 22:41:35 +01:00
47108bb351
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-06 21:15:31 +01:00
f2903db390
For llGetMass(), return the mass of the avatar is the object is attached.
...
As per http://lslwiki.net/lslwiki/wakka.php?wakka=llGetMass
This is the mass as used by the physics engine (ODE or Bullet).
2012-04-06 21:14:19 +01:00
c3a8c00ce0
Addition of missing constants for llGetObjectDetails including for Mantis 5502
...
Signed-off-by: nebadon <michael@osgrid.org>
2012-04-06 12:42:46 -07:00
627efc172b
Make llGetMass() return total mass of object when called on root prim.
...
As per http://lslwiki.net/lslwiki/wakka.php?wakka=llGetMass
Aims to resolve http://opensimulator.org/mantis/view.php?id=5954
2012-04-06 20:32:39 +01:00
908cebbea8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-06 20:29:54 +01:00
6a9f36788d
Deleted the unused and commented code from 2 commits ago.
2012-04-06 12:28:15 -07:00
4c32f79c10
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-04-06 11:52:38 -07:00
7435582b70
If an AddItem fails, try adding it to the right folder type.
2012-04-06 11:52:05 -07:00
25b3edc21c
WARNING: LOTS OF COMMENTED AND UNUSED CODE IN THIS COMMIT. This is on purpose; it's an historical record of what works and what doesn't wrt manipulating inventory at the viewer. I'll remove the unused code in a subsequent commit, but wanted to place it in history. The uncommented code works.
2012-04-06 11:51:12 -07:00
953fe46811
A few minor tweaks here and there in XInventoryService.
2012-04-06 11:48:41 -07:00
6eaff18961
Finish the implementation of GetUserInventory, even though it's still not used.
2012-04-06 11:38:47 -07:00
8fd86c9156
Packing of folder in SendBulkUpdateInventory always set the folder type to -1. Not sure if there's a reason for it, but I'm changing it to the given folder type.
2012-04-06 11:24:34 -07:00
e324fb2415
Guard against null inventory contents.
2012-04-06 11:22:30 -07:00
cdbe34716f
Thank you, BaseHttpServer, for telling me where things go wrong.
2012-04-06 11:21:27 -07:00
67537f3596
Added missing refresh of group membership client side cache to the groups module. Before memberships of non active groups often were not stored in the cache (n_groupPowers).
2012-04-05 13:03:57 +02:00
8f45eb913c
Revert last commit
2012-04-05 11:10:05 +02:00
e4406c846d
Group based access restrictions to parcels require group membership, but not that this group is active for that user.
2012-04-05 10:25:54 +02:00
600a86bcae
Little bug fix in HasGroupAccess, to properly store the case "true" in the cache.
2012-04-05 10:02:18 +02:00
a5d6b624f6
Simplify group access checks and break them out into a separate method.
...
Use existing cache if the avatar is within the region and use an
ExpiringCache to cache status if the avatar is not in the region. The
30 second delay now applies to scripted objects ony and only when the owner
is not present.
2012-04-05 00:45:58 +01:00
36c8fa16c0
Implements group based access restrictions for parcels of land. Because of caching there can be a delay of up to 30 seconds until the access rights are effectively changed for a user.
2012-04-05 00:53:40 +02:00
9a9923405a
terrain save-tile extensions Signed-off-by: Garmin Kawaguichi <garmin.kawaguichi@magalaxie.com>
...
Signed-off-by: Melanie <melanie@t-data.com>
2012-04-03 20:06:03 +01:00
633f4bb3d8
remove possible PhysActor unexpectedly null race conditions when changing prim collision status
...
factor out common SOP physics scene adding code into a common SOP.AddToPhysics() that is the counterpart to the existing RemoveFromPhysics()
2012-04-03 09:28:17 +01:00
e480e25d8b
Fix more SOP.PhysActor race conditions in LSL_Api
2012-04-03 06:01:05 +01:00
7468299673
Eliminate race condition where many callers would check SOP.PhysicsActor != null then assume it was still not null in later code.
...
Another thread could come and turn off physics for a part (null PhysicsActor) at any point.
Had to turn off localCopy on warp3D CoreModules section in prebuild.xml since on current nant this copies all DLLs in bin/ which can be a very large number with compiled DLLs
No obvious reason for doing that copy - nothing else does it.
2012-04-03 05:51:38 +01:00
6e7f13a72d
Implement bulk inventory update over CAPS (not recursive by design,
...
do NOT CHANGE THIS, needed for HG 2.0)
2012-03-31 02:32:47 +01:00
32a953fed7
refactor: Rename SOG.GetChildPart() to GetPart() since it can also return the 'root' part.
2012-03-31 01:52:06 +01:00
f0406f9fe2
Rename SOG.HasChildPrim(uint) to SOG.ContainsPart(uint) to match existing ContainsPart method and remove method duplication.
...
HasChildPrim is also misleading since the 'root' prim can also be returned.
2012-03-31 01:45:37 +01:00
387d7fdad5
Allow llRegionSayTo() to work on the PUBLIC_CHANNEL, as per http://wiki.secondlife.com/wiki/LlRegionSayTo
...
Addresses http://opensimulator.org/mantis/view.php?id=5950
2012-03-31 01:29:13 +01:00
38d241a317
Add MSSQL login processing fix for servers run on different locales.
...
This may no longer be an issue with better locale enforcement in OpenSimulator but it doesn't hurt to have this patch.
http://opensimulator.org/mantis/view.php?id=4680
Thanks to controlbreak for this
2012-03-31 01:12:04 +01:00
69fc8c4985
minor: small message adjustment and unnecessary code elimination when notifying client of no build permission
2012-03-31 01:07:14 +01:00
874140f950
fix Infinite loading on No Rez http://opensimulator.org/mantis/view.php?id=5932
2012-03-31 01:01:59 +01:00
e5343bccdf
Add Extended flavour option to opensim version information.
...
This flavour is for changes in addition to the 0.7.3-post-fixes branch that are too large to be considered fixes but should be reasonably stable.
This flavour will almost certainly never see a formal release.
2012-03-30 02:11:32 +01:00
269e479cdc
minor: remove some now unneeded code from FriendsCommandsModule
2012-03-30 02:00:01 +01:00
3525c876c8
Make default "show friends" console command show friends fetched from the friends service.
...
There is no a --cache option which will show friends from the local cache if available.
2012-03-30 01:57:38 +01:00
1ef62ca75e
Lock NullFriendsData.m_Data for consistency and against concurrent read/write
2012-03-30 01:23:34 +01:00
bce7964ac2
refactor: Move "friends show cache" console command out into separate FriendsCommandsModule.
...
Expose required methods on IFriendsModule. Rename GetFriends() -> GetFriendsFromCache() for self-documentation
2012-03-30 01:05:29 +01:00
59157d9d63
Add simple login test with online friends. Add IFriendsModule.GrantRights() for granting rights via a module call.
...
Rename IFriendsModule.GetFriendPerms() -> GetRightsGrantedByFriend() to be more self-documenting and consistent with friends module terminology.
Add some method doc.
2012-03-30 00:42:55 +01:00
b8d383da0a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-30 00:38:23 +01:00
30db0ac5e2
Finish up the SuitcaseInventory service.
2012-03-29 16:25:55 -07:00
bf09d6a22b
refactor: Stop passing both IClientAPI and agentID to friend event listeners, these are redundant. Replace a few magic numbers with FriendRights enum already used elsewhere.
2012-03-29 18:31:57 +01:00
012b01f224
Add simple regression test for logging in with offline friends. Don't expect to receive any in this instance.
2012-03-29 03:19:45 +01:00
cd3f3cbdde
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-29 01:29:00 +01:00
22a85b947a
Add back parts of reverted changes that were not concerned with child agent caching.
...
This adds ScenePresence to IClientAPI.SceneAgent earlier on in the add client process so that its information is available to EventManager.OnNewClient() and OnClientLogin()
Also add a code comment as to why we're caching friend information for child agents.
2012-03-29 01:26:30 +01:00
62b1c807c2
Also add OSS header to interface
2012-03-29 01:14:50 +01:00
bd83676d6c
Change namespace on CallingCardModule and correct interface file placemant. Also ass OpenSource header
2012-03-29 01:13:08 +01:00
93ac47f0d3
Revert "Simplify friends caching by only doing this for root agents - no functions require caching for child agents."
...
We need to cache child agents so that friends object edit/delete permissions will work across boarders on regions hosted by different simulators.
This reverts commit d9f7b8549b
2012-03-29 01:08:47 +01:00
a1de9bc33f
Revert "Add comment about setting client.SceneAgent in AddNewClient()"
...
This reverts commit 964cae4f37
2012-03-29 01:08:37 +01:00
c52ff5cf7b
Committing the Avination calling card module
2012-03-29 00:47:09 +01:00
5a82d939e6
Adding the Avination calling card interface
2012-03-29 00:34:28 +01:00
532e3dad26
Pushing the Avination Calling card hooks. Module to follow.
2012-03-29 00:31:11 +01:00
964cae4f37
Add comment about setting client.SceneAgent in AddNewClient()
2012-03-29 00:21:14 +01:00
d9f7b8549b
Simplify friends caching by only doing this for root agents - no functions require caching for child agents.
...
This allows us to avoid unnecessary multiple calls to the friends service.
All friends functions originate from the root agent and only go to other root agents in existing code.
This also allows us to eliminate complex ref counting.
2012-03-28 23:40:25 +01:00
33df0c2efd
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-28 23:36:30 +01:00
6bf4d88397
HG 2.0 Suitcase inventory: proof of concept now working properly with the heavy SendBulkInventoryUpdate message. Waiting for Melanie to finish the light-weight version of that message.
2012-03-28 15:32:19 -07:00
874bf1f8e5
Enable voice by default on parcels to weaken effects of viewer 2/3 ParcelVoiceInfoRequest bug
...
Viewer 2/3 contains a bug where the viewer will constantly retry ParcelVoiceInfoRequest requests on voice-disabled parcels where voice is otherwise available.
Attempts to fix this server-side have not been successful - sending a non-OK http code (e.g. a 404) just makes the viewer request again immediately.
Dropping the request entirely is a bit better but the viewer still retries after a minute.
Estate settings already enabled voice by default so doing the same for parcels. This only has an effect if you have any voice system active at all.
Ultimately, the re-request bug needs to be fixed viewer-side (LL suffers from the same issue!) but it might be worth implementing the drop request hack.
2012-03-28 23:30:28 +01:00
51dc1e709c
HG 2.0: added the beginning of HGSuitcaseInventoryService. Plus moved the hack away from ScenePresence. This is better but it still doesn't restore the inventory upon arrival.
2012-03-28 15:01:37 -07:00
03766c010f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 20:38:02 -07:00
af96b99356
More on switching the root folder from under the viewer. More experiments.
2012-03-27 20:36:54 -07:00
614c404923
Typo fix
2012-03-28 03:45:52 +01:00
4007f62158
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 19:09:03 -07:00
300968e933
HG: Switch root folders from under the viewer. Towards HG 2.0. This is guarded by an obscure config that no one but me should be using at this point.
2012-03-27 19:08:29 -07:00
b24605d526
Fix typos
2012-03-28 02:55:29 +01:00
514a9fdf8e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-28 02:52:11 +01:00
12d3ea3029
Add "friends show cache <first-name> <last-name>" command for debugging purposes.
...
This adds a reverse lookup (name -> ID) to IUserManagement instead of hitting the UserAccountService directly.
2012-03-28 02:51:34 +01:00
a43e804e59
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2012-03-28 02:46:31 +01:00
0463a00d34
Start on Bulk inventory update via CAPS. Not functional yet. HG v2
2012-03-28 02:45:50 +01:00
8c0f1e9058
Add a corresponding method for items. HG v2
2012-03-28 02:10:07 +01:00
710c14fb57
Add SendRemoveInventoryFolders which allows to remove one or more
...
folders from the viewer's inventory view. For HG v2.0. More to come
2012-03-28 01:49:06 +01:00
445e8bc560
minor: Add some documentation to OnNewClient and OnClientClosed events
2012-03-28 01:08:56 +01:00
cb41fb64be
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-28 01:06:18 +01:00
37603ca6da
Reverse a conditional in XInventory that made updating system folder evrsion numbers impossible
2012-03-27 23:11:06 +01:00
db5f46fa23
Let grided simulators retrieve the user's inventory skeleton
2012-03-27 15:24:55 -07:00
b74a89bc12
minor: clean up some code formatting in VivoxVoiceModule.cs
2012-03-27 22:33:42 +01:00
5e07336672
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 14:25:36 -07:00
91950b3147
Amend to previous commit regarding the config name. Bugs bite.
2012-03-27 14:24:59 -07:00
19837ff4dd
Two new scripting functions osInviteToGroup(userID) and osEjectFromGroup(userID) that invite/eject users to/from groups the object containing the script is set to. These functions also work for closed groups.
2012-03-27 22:30:02 +02:00
5d37a31436
Merge branch 'master' of ssh://snoopy@opensimulator.org/var/git/opensim
2012-03-27 22:16:25 +02:00
7223b63563
User level based restrictions for HyperGrid teleports, asset uploads, group creations and getting contacted from other grids. Incoming HyperGrid teleports can also be restricted to local users.
2012-03-27 22:09:58 +02:00
971d32fda3
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 12:51:58 -07:00
0247d738e2
When loading objects from DB, first add to scene, then call TriggerOnSceneObjectLoaded.
2012-03-27 12:50:58 -07:00
de242a29ca
HG: beginning of a more restrictive inventory access procedure (optional). Experimental: we'll try switching the root folder from under the viewer.
2012-03-27 11:54:13 -07:00
2e2634896d
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 10:09:08 -07:00
8131a24cde
Send the config section name up to the service classes themselves (XInventory and Assets).
2012-03-27 10:08:13 -07:00
09c85a6a6c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-27 02:10:02 +01:00
1aa1a9eb3d
In TerrainModule.cs, the command terrain save-tile is modified to remove an unnecessary double argument "minimum Y tile"
2012-03-27 02:05:57 +01:00
872d513daa
BulletSim: make avatar animations update properly.
...
It seems that ODE calls the avatar collision handling routine even
if there are no collisions. This causes the animation to be updated.
So, for instance, going from HOVER to FLY is caused by the physics engine
calling the collision routine each frame with 0 collisions.
2012-03-26 17:36:33 -07:00
ad865ab4fc
Add some more overloads to allow registering overloaded methods and lists
...
of methods.
2012-03-26 16:46:07 +01:00
2fcdecf090
BulletSim: fix typo introducted by previous checkins (git merge sometimes makes mistakes)
2012-03-26 08:57:40 -07:00
f8879e06d2
Merge branch 'bulletsim1'
2012-03-26 08:49:12 -07:00
3810e98474
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
...
Conflicts:
OpenSim/Region/OptionalModules/Scripting/ScriptModuleComms/ScriptModuleCommsModule.cs
2012-03-26 14:21:15 +01:00
7e0936e4b6
Add a hust UUID to the script invocations
2012-03-26 14:19:55 +01:00
055269805d
Fix compile error in ScriptModuelComms and add some debugging into the modInvoke
...
routines to simplify finding method registration issues.
2012-03-25 22:59:06 -07:00
98a6c78943
Fix the omission on the interface declaration
2012-03-26 03:33:39 +01:00
c9c01d5226
Further simplify ScriptComms
2012-03-26 03:20:40 +01:00
ac0f1ff0a6
Dynamically create the delegate type to reduce complexity in the caller
2012-03-26 01:47:20 +01:00
d7cc194e83
Correct the design error I introduced into ScriptComms. Untested but about to
...
be.
2012-03-26 01:47:14 +01:00
cb44808504
Simplify the module invocation registration. The types and method name
...
can be pulled fromt he delegate so we don't need to pass them explicitly
2012-03-25 19:52:38 +01:00
a07fa0395f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-24 22:45:17 -07:00
a14437ad5a
Add support for key, vector, rotation and list types for both
...
arguments and return values to the modInvoke family of functions.
See http://opensimulator.org/wiki/OSSL_Script_Library/ModInvoke
2012-03-24 22:43:42 -07:00
4f17537555
Allow the user to enter help topics in upper or lowercase.
...
Forcing uppercase (e.g. help Assets) is too annoying.
Thanks to WhiteStar for pointing this out.
2012-03-24 03:07:01 +00:00
f03c3c062e
Hack example on to "terrain save-tile" extended help.
...
Thanks to Garmin Kawaguichi for the initially suggested text.
2012-03-24 02:41:45 +00:00
f53c6b2594
Use system provided temporary file in "terrain save-tile" to avoid problems with drive letters on windows
...
Thanks to Garmin Kawaguichi for picking up on this and providing an initial solution (which I adapted).
2012-03-24 02:30:43 +00:00
cf61c74e90
Give feedback when "terrain save-tile" is not successfully invoked.
2012-03-24 02:16:44 +00:00
07388071d4
Merge branch 'bulletsim1' of ssh://island.sciencesim.com/home/sceneapi/radams1/bs-opensim into bulletsim1
...
Conflicts:
OpenSim/Region/Physics/BulletSPlugin/BSScene.cs
2012-03-23 16:20:53 -07:00
ff54b3c366
BulletSim: change default of shouldDisableContactPoolDynamicAllocation from False to True. It seems that collisions don't happen well when it is False (things fall through terrain).
2012-03-23 15:50:32 -07:00
3f53b7bc91
BulletSim: Add new configuration parameters to get and set console commands
2012-03-23 13:15:24 -07:00
142de1d02f
BulletSim: add a bunch of internal Bullet configuration parameters to OpenSimDefaults.ini and the code.
2012-03-23 13:15:23 -07:00
1273f259e4
BulletSim: remove confusion between angularVelocity and rotationalVelocity (there is still confusion in the rest of OpenSim). Enhance some debug statements to include the object ID.
2012-03-23 13:15:22 -07:00
1a738caeca
BulletSim: update TODO list. Rearrange code for readability. Add per object friction and restitution runtime settable parameters.
2012-03-23 13:15:18 -07:00
de24feb275
BulletSim: Add AvatarRestitution parameter. Centralize computation of buoyancy for flying. Tweek avatar default friction and resititution
2012-03-23 13:15:17 -07:00
6ecdadb329
BulletSim: set buoyancy in only one place
2012-03-23 13:15:16 -07:00
b22d040169
BulletSim: add some new runtime setable parameters to match the dll.
2012-03-23 13:15:14 -07:00
975184b3f9
BulletSim: Update list of TODO tasks
2012-03-23 13:15:11 -07:00
164706043d
Have the PhysicsParameters module output console command responses
...
directly to the console rather than logging at INFO (which doesn't
output anything for WARN).
There should really be a WriteLine method on ICommandConsole so all
of the different commands don't have to figure out where the command
output should go.
2012-03-23 13:11:58 -07:00
6b87a29c86
fix yield prolog so it compiles with mono 2.11 there has been a bugzilla
...
report files with mono project in regards to this change, this simply
lets us move forward with using mono 2.11 for now :
https://bugzilla.xamarin.com/show_bug.cgi?id=4052
2012-03-23 02:22:57 -07:00
d4beb2f5bc
Comment out log message about sending periodic appearance updates.
2012-03-23 03:39:39 +00:00
54887bf386
Add experimental SendPeriodicAppearanceUpdates = true/false setting to [Startup] in OpenSim.ini
...
On osgrid and other places, I have observed that manually sending appearance updates from the console often relieves grey avatar syndrome.
Despite hunting high and low, I haven't been able to find where this packet is sometimes being lost - it might be a persistent viewer bug for all I know.
Therefore, this experimental setting resends appearance data for everybody in the scene every 60 seconds. These packets are small and the viewer only fetches texture
data if it doesn't already have it.
Default is false.
2012-03-23 03:33:07 +00:00
4ed833bc9d
Add a scene maintenance thread in parallel to the heartbeat thread. The maintenance thread will end up running regular jobs that don't need to be in the main scene loop.
...
The idea is to make the critical main scene loop as skinny as possible - it doesn't need to run things that aren't time critical and don't depend on update ordering.
This will be done gradually over time to try and uncover any issues. Many non-criticial scene loop activities are being launched on separate threadpool threads anyway.
This may also allow modules to register their own maintenance jobs without having to maintain their own timers and threads.
Currently the maintenance loop runs once a second, as opposed to the 89ms scene loop.
2012-03-23 02:49:29 +00:00
349454ca27
Remove unnecessary shutting down check in Scene.Heartbeat(). Add some method doc. Rename HeartbeatThread, shuttingdown to conform to code standards.
2012-03-23 01:46:11 +00:00
c0672cb7db
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-22 21:27:03 -04:00
176bba4f67
Merge branch 'master' of /home/opensim/src/opensim
2012-03-22 21:26:30 -04:00
18b3f1132e
Rename Scene.StartTimer() to Start() - this method no longer uses a timer. Comment out more effectively unused old heartbeat code.
2012-03-23 01:21:43 +00:00
4ee8b3e23e
Fix build break
2012-03-23 01:11:43 +00:00
a9995ede65
Fix bug in ScenePresenceAnimator.RemoveAnimation() introduced in commit 1a8769e
...
Forgot to uppercase the animation name for default animations, since for some reason we store and use them in upper rather than lowercase.
2012-03-23 01:08:13 +00:00
bc2963d42a
Comment out unused scene loop restart code.
...
This has actually been unused since at least 0.7.2 due to earlier changes.
2012-03-23 01:03:10 +00:00
08b8ebcc7e
Use m_lastFrameTick instead of m_lastUpdate in Scene.GetHealth(). m_lastUpdate is no longer properly updated and is redundant anyway.
2012-03-23 00:55:11 +00:00
c903813e00
RegionReady logging
...
Some maintenance to clean up logging messages
2012-03-22 20:49:45 -04:00
40b9b519b8
Add commented out section on collisions switch in Scene.SetSceneCoreDebug().
...
This was not implemented before the recent changes but should be at some point.
2012-03-23 00:12:14 +00:00
efe61b2481
BulletSim: remove confusion between angularVelocity and rotationalVelocity (there is still confusion in the rest of OpenSim). Enhance some debug statements to include the object ID.
2012-03-22 17:04:06 -07:00
15c2499ccd
Comment out login parameters debug output accidentally included with c4b2d24
2012-03-22 23:31:41 +00:00
c1d064e1ca
Comment out a terrain save-tile debugging message that accidentally crept in with c4b2d24
2012-03-22 23:16:52 +00:00
5bf45b9b98
refactor: simplify code for checks when part.OwnerID != destPart.OwnerID in MoveTaskInventoryItem()
2012-03-22 22:40:38 +00:00
760010d6fb
Fix llGiveInventory() so that it checks the destination part for AllowInventoryDrop, not the source.
...
This allows llAllowInventoryDrop() to work.
Regression test added for this case.
2012-03-22 22:33:37 +00:00
3bcf71c647
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-22 22:33:16 +00:00
c4b2d24f33
Add llGiveInventory() test from object to object where both objects are owned by the same user.
2012-03-22 22:17:07 +00:00
df624c13c9
HG Friends: don't notify if the server isn't there.
2012-03-22 15:08:57 -07:00
6bc1ccf234
Change a false false to be truly true - or is this statement false?
...
Fixes perms boo-boo
2012-03-22 20:39:18 +00:00
b5d0bc2488
Rework Diva's patch to simplify it
2012-03-22 20:25:20 +00:00
45b588cf00
Revert "Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch."
...
This reverts commit 6146e7ef25
2012-03-22 20:10:38 +00:00
6146e7ef25
Simple build permissions feature. NOTE: EXPERIMENTAL, DISABLED BY DEFAULT. Turns out that this can't be expressed by cascading Permission modules, so I did it as per this patch.
2012-03-22 12:57:12 -07:00
9949ac2f9f
refactor: Rename AvatarAnimations -> DefaultAvatarAnimations for code clarity since non-default animations are handled completely separately from this class
2012-03-22 00:10:41 +00:00
71ec84d77f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-22 00:00:05 +00:00
1a8769e6ef
Instead of loading default avatar animations in both SLUtil and AvatarAnimations, load just in AvatarAnimations instead.
...
This lets us remove the dependency of OpenSim.Framework.dll on data/avataranimations.xml, which is not necessary for ROBUST.
This commit also takes care of the odd situation where animations are stored and used internally with uppercase names (e.g. "STAND")
but scripts refer to them with lowercase names (e.g. "sit").
2012-03-21 23:57:39 +00:00
7783c93802
BulletSim: update TODO list. Rearrange code for readability. Add per object friction and restitution runtime settable parameters.
2012-03-21 16:16:47 -07:00
cb2727cf6e
BulletSim: Add AvatarRestitution parameter. Centralize computation of buoyancy for flying. Tweek avatar default friction and resititution
2012-03-21 16:16:46 -07:00
6c55fd93a3
BulletSim: set buoyancy in only one place
2012-03-21 16:16:45 -07:00
898a16802b
BulletSim: add some new runtime setable parameters to match the dll.
2012-03-21 16:16:44 -07:00
eafc3d6c47
BulletSim: Update list of TODO tasks
2012-03-21 16:16:41 -07:00
5170cd7577
Updated the UserAccountsClient a little bit, plus some more sanity checks on the service connector.
2012-03-21 11:22:39 -07:00
4a9ca3ca8f
HG Friends: reroute the status notifications to the HGFriends service, so that they can scale better. They were previously being handled by the UAS; that is still there, but it's now obsolete and will be removed in a future release.
2012-03-21 10:35:06 -07:00
d8bcb78b10
HG Friends: pulled sim-bound notification code to HGStatusNotifier, so that we can better manage this traffic.
2012-03-21 09:14:17 -07:00
8ad426f329
Removed extraneous debug message
2012-03-21 08:08:43 -07:00
1089e9b842
Removed extraneous debug message
2012-03-21 08:08:12 -07:00
5abe1b4fce
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-20 21:36:46 -07:00
d49dd5573b
Removed extraneous debug messages. Added a check for UUID.Zero.
2012-03-20 21:36:02 -07:00
54a8a5baba
If "debug scene updates true" then print out to log when a garbage collection occurs.
2012-03-21 02:02:14 +00:00
de53aa32e0
Add Scene.DebugUpdates switch which, if turned on, will print out a warning when a frame updates takes longer than twice the desired time
...
This is controlled via "debug scene updates true|false" on the region console.
Also fix an oversight with "debug scene teleport true|false"
2012-03-21 01:27:09 +00:00
ab243f4a57
Incorporate scene teleporting debugging into "debug scene teleport true|false" command
2012-03-21 01:13:44 +00:00
9671e43497
Replace "scene debug true false true" console command with "scene debug scripting true" or other parameters as appropriate.
...
This is to allow individual switching of scene debug settings and to provide flexibiltiy for additional settings.
2012-03-21 01:02:58 +00:00
7a0d7be44c
Refix the fixed fix!
2012-03-21 00:17:58 +00:00
69a9a6993e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-20 17:33:26 -07:00
91a001d3cf
fix compile error from last commit
2012-03-21 00:31:31 +00:00
9e8b194356
Fixed borkness with map search introduce by my last changes to it.
2012-03-20 17:29:34 -07:00
742acc0a3c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-20 17:26:18 -07:00
f7c61790b7
Fixed borkness with previous merge.
2012-03-20 17:25:52 -07:00
022366a074
refactor: simplify EstateManagementModule.handleEstateDebugRegionRequest()
2012-03-21 00:23:46 +00:00
841b4232f6
Line endings
2012-03-20 17:19:55 -07:00
3fa51f66ec
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
...
Conflicts:
OpenSim/Framework/Util.cs
2012-03-20 17:19:14 -07:00
d08ad6459a
HG Friends: allow the establishment of HG friendships without requiring co-presence in the same sim. Using avatar picker, users can now search for names such as "first.last@grid.com:9000", find them, and request friendship. Friendship requests are stored if target user is offline. TESTED ON STANDALONE ONLY.
2012-03-20 17:14:19 -07:00
7bf628ab31
Add ability to log warn if a frame takes longer than twice the expected time. Currently commented out.
2012-03-21 00:02:08 +00:00
4c41b53a4b
Add prim name to "[MESH]: No recognized physics mesh..." log message
2012-03-20 23:35:50 +00:00
02f9caf6ce
remove some mono compiler warnings
2012-03-20 23:34:10 +00:00
3701f893d3
remove unnecessary tmpFrameMS, use maintc instead for frame time calculation
2012-03-20 23:31:57 +00:00
c39fba8f9d
minor: remove some mono compiler warnings
2012-03-20 23:19:11 +00:00
8bdd38b804
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-20 23:14:15 +00:00
30b2a8c778
Move frame loop entirely within Scene.Update() for better future performance analysis and stat accuracy.
...
Update() now accepts a frames parameter which can control the number of frames updated.
-1 will update until shutdown.
The watchdog updating moves above the maintc recalculation for any required sleep since it should be accounted for within the frame.
2012-03-20 23:12:21 +00:00
bd1f848bf6
slight increase in jump power to make running jump slightly better.
2012-03-20 14:17:15 -07:00
9ed3532c1b
reduce avatar verticle jump from the absurd 5 meter jump to a less
...
absurd 3m vertical jump to better match what you would see in Second
Life and be more in line with what users would expect.
2012-03-20 13:45:38 -07:00
86bd287b53
refactor: precalculate the fixed movement factor for avatar tilting (sqrt(2)) rather than doing it multiple times on every move.
2012-03-20 20:39:33 +00:00
5f2a65c976
refactor: Eliminate unnecessary duplicate avCapsuleTilted
2012-03-20 20:28:58 +00:00
a3abd65e3d
Remove pointless ThreadAbortException catching in a test that isn't run anyway.
2012-03-20 01:41:32 +00:00
8c911ddaf0
Remove some pointless catching/throwing in the scene loop.
2012-03-20 01:39:19 +00:00
4cbaf053cf
Fix small typo
2012-03-20 00:53:33 +00:00
1c0f3a1f21
Fix crash where two scene loop threads could changes m_MeshToTriMeshMap at the same time.
...
Have to lock m_MeshToTriMeshMap as property is static and with more than one region two scene loops could try to manipulate at the same time.
2012-03-20 00:40:03 +00:00
e9271ec653
Add some doc about the EventManager.OnLoginsEnabled event.
2012-03-19 22:48:26 +00:00
e2b1c569da
Fix a bug where logins to standalones would fail if the RegionReady module was not active
...
Unfortunately, the OnLoginsEnabled event is currently only guaranteed to fire if the RegionReady module is active.
However, we can instantiate the AuthorizationService in the module RegionLoaded method since by this time all other modules will have been loaded
2012-03-19 22:45:03 +00:00
437f18bc41
Stop console command "xengine status" throwing an exception if there are no scripts in a region.
...
Addresses http://opensimulator.org/mantis/view.php?id=5940
2012-03-19 21:43:23 +00:00
ab54ce1907
Fix configuration problems where XAssetDatabasePlugin was picked up accidentally.
...
The asset data plugin now implements IXAssetData rather than IAssetData so the ordinary AssetService should no longer pick it up.
This replaces the changes in 92b1ade
2012-03-19 00:18:04 +00:00
d1256536b5
Added GetUUID(first, last) on UserAgentsService so that we can finally make direct user connections.
2012-03-17 21:27:28 -07:00
441ef301a3
Amend to previous commit: normalize strings ToLower.
2012-03-17 19:41:47 -07:00
7dfa0309c6
More on HG access control. This commit splits the UserManagementModule into the Basic one and the HG one, so that we can do everything that needs to be done for HG ACLs to work without interfering with the vanilla opensim. For the moment, it finds foreign users who have left a trace in the region, e.g. an object. This makes it possible to ban/IM/etc these users using the regular avatar picker. TODO: contact the UAS directly given a name of the form First.Last @foo.com.
2012-03-17 15:36:20 -07:00
1a4fdd2666
Moved HandleAvatarPickerRequest from the generic Scene.PacketHandlers to the UserManagementModule where it belongs. No functional changes.
2012-03-17 10:48:22 -07:00
d87a5758fb
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-17 10:00:43 -07:00
33c14cb107
Region access control! Region operators can now specify things like DisallowForeigners (means what it says) and DisallowResidents (means that only admins and managers can get into the region). This puts the never-completed AuthorizationService to good use. Note that I didn't implement a grid-wide Authorization service; this service implementation is done entirely locally on the simulator. This can be changed as usual by pluging in a different AuthorizationServicesConnector.
2012-03-17 10:00:11 -07:00
4a57112f19
Add osGetInventoryDesc() as per http://opensimulator.org/mantis/view.php?id=5927
...
This allows one to get description data for a given prim inventory item.
Thanks MarcelEdward and GuduleLapointe!
2012-03-17 04:02:23 +00:00
1e4180fc93
Clean up "save iar" help
2012-03-17 02:54:19 +00:00
a4dca88a57
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-16 13:08:27 -07:00
a2009ffe2e
Terrain: added [Terrain] section with an option to load an initial flat terrain. Default is still pinhead island. I much rather have a flat land in the beginning.
2012-03-16 13:08:05 -07:00
59b6f6a6e0
minor: reuse threadpool count we just fetched instead of fetching it again
2012-03-16 03:56:56 +00:00
bece2023e7
Add total scripts count to "show threads"
...
However, this returns 0 on Mono (at least on 2.6.7)! So not showing if it is zero.
2012-03-16 03:52:13 +00:00
9497a7c7bd
refactor: separate out console and status report generation parts of XEngine
2012-03-16 03:32:14 +00:00
922d8c9312
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-16 03:28:17 +00:00
6e8f80f1ab
Improve threadpool reporting to "show threads" console command (also gets printed out periodically)
2012-03-16 03:26:47 +00:00
05bb2e4275
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-15 20:22:59 -07:00
05a1493fff
More on map search: send extra messages to the user regarding the region being found or not, because the UI is horribly confusing -- places profile is always "loading..." whether the region exists or not.
2012-03-15 20:22:26 -07:00
421b562a04
Add process working memory to "show stats" memory statistics.
...
This shows the actual amount of RAM being taken up by OpenSimulator (objects + vm overhead)
2012-03-16 02:43:33 +00:00
aa881e8065
Allow comments to appear in command scripts (e.g. shutdown_commands.txt).
...
These can start with ; # or //
2012-03-16 02:07:26 +00:00
8550a4a07e
In Top Scripts report, don't show scripts with no or less than 1 microsecond of execution time.
...
This is to make the report clearer and less confusing.
2012-03-16 01:46:21 +00:00
c386b68373
Aggregate script execution times by linksets rather than individual prims.
...
This is for the top scripts report.
2012-03-16 01:31:53 +00:00
7df4a544fe
Fix owner name display in "Top Colliders" and "Top Script" region reports.
2012-03-16 00:53:36 +00:00
a4b01ef38a
Replace script-lines-per-second with the script execution time scaled by its measurement period and an idealised frame time.
...
The previous lines-per-second measurement used for top scripts report was inaccurate, since lines executed does not reflect time taken to execute.
Also, every fetch of the report would reset all the numbers limiting its usefulness and we weren't even guaranteed to see the top 100.
The actual measurement value should be script execution time per frame but XEngine does not work this way.
Therefore, we use actual script execution time scaled by the measurement period and an idealised frame time.
This is still not ideal but gives reasonable results and allows scripts to be compared.
This commit moves script execution time calculations from SceneGraph into IScriptModule implementations.
2012-03-16 00:34:30 +00:00
0548eeb571
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-15 16:03:33 -07:00
18d1d6d3b4
More on SLURLs and V3. This is hacky, but it works. Basically, we have to redefine the encoding of HG URLs because the viewer messes them up. Examples of what works and doesn't work:
...
- secondlife://ucigrid00.nacs.uci.edu|8002/128/128 <-- works throughout the viewer
- secondlife://http|!!ucigrid00.nacs.uci.edu|8002+Test+Zone+1/128/128 <-- works throughout the viewer
- secondlife://http|!!grid.sciencesim.com!grid!hypergrid.php+Yellowstone01+74/128/128 <-- works throughout
- secondlife://http%3A%2F%2Fucigrid00.nacs.uci.edu%3A8002%20UCI%20Central%201/128/128 <-- works in chat, but not as URLs in the webkit
2012-03-15 16:03:09 -07:00
df144eb9e2
Revert "Revert "More hacking around viewer bug""
...
This reverts commit e5612553ce
2012-03-15 14:55:25 -07:00
f52917288a
These SLURLs are very confusing! -- reverting the revert. Hack is, indeed, needed.
...
Revert "Revert "Hack around https://jira.secondlife.com/browse/VWR-28570 ""
This reverts commit 5a9560db28
2012-03-15 14:54:25 -07:00
5a9560db28
Revert "Hack around https://jira.secondlife.com/browse/VWR-28570 "
...
This reverts commit 697ac7fd9d
2012-03-15 14:36:48 -07:00
e5612553ce
Revert "More hacking around viewer bug"
...
This reverts commit 10731732b4
2012-03-15 14:36:29 -07:00
8b5298a62e
Protect the scriptmodulecomms interface.
2012-03-15 13:37:43 -07:00
402ff75d78
Adds a new script command 'modInvoke' to invoke registered functions
...
from region modules. The LSL translator is extended to generate the
modInvoke format of commands for directly inlined function calls.
A region module can register a function Test() with the name "Test".
LSL code can call that function as "Test()". The compiler will translate
that invocation into modInvoke("Test", ...)
2012-03-15 13:16:02 -07:00
fd4ad82367
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2012-03-15 11:06:08 -07:00
10731732b4
More hacking around viewer bug
2012-03-15 11:05:43 -07:00
Justin Clark-Casey (justincc)