This is to facilitate running Freeswitch in a separate ROBUST shell, as on grid setups there can be quite a lot of traffic flowing between FreeSWITCH and ROBUST. However, running in a spearate shell is not mandatory.
limits because the only ones used now are the defaults (which are overwritten
by the client throttles anyway). Updated the default rates to correspond to
about 350kbps.
Also added a configuration to disable adaptive throttle. The default
is the previous behavior (no adaptation).
This brings it into line with the Windows and Linux libraries.
This is a universal dylib with x86_64, i386 and ppc parts. However, even on a 64 bit Intel machine Mono can only P/INVOKE the i386 version right now. ppc is untested.
The configuration used to compile was
CFLAGS="-g -O2 -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -arch ppc" CXXFLAGS="-g -O2 -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -arch ppc" LDFLAGS="-arch i386 -arch x86_64 -arch ppc" ./configure --enable-old-trimesh --disable-asserts --enable-shared --disable-dependency-tracking --disable-demos --without-x
--disable-demos --without-x is required to build ODE on Mac OS X
CFLAGS, CXXFLAGS and --disable-dependency-tracking are necessary to build the universal dylib (some compilation lines use CFLAGS instead of CXXFLAGS)
The other settings are tweaks for using ODE with OpenSim
This means that Mac OS X users can now use the standard sqlite adaptor instead of the legacy one.
This is SQLite 3.7.5. I configured the build with the line
CFLAGS="-Os -g -isysroot /Developer/SDKs/MacOSX10.6.sdk -arch i386 -arch x86_64 -arch ppc7400 -DSQLITE_ENABLE_COLUMN_METADATA" LDFLAGS="-arch i386 -arch x86_64 -arch ppc7400" ./configure --disable-dependency-tracking
The SQLITE_ENABLE_COLUMN_METADATA flag exports the metadata symbols that modern Mono SQLite adaptors need.
The -Os removes debugging symbols (as per the sqlite3 source pkg README)
The other parts are to cross compile for x86_64, i386 and ppc. On Mac OS X, Mono can actually only P/INVOKE 32-bit libraries even on 64 bit platforms so i386 is being used. The dylib has not been tested on ppc.
Apply the same change to both the 32-bit and 64-bit DLL target paths. This makes the previous addition to the instructions in the README for running on Linux unnecessary.
This version fixes a bug so that MySqlCommand.CommandTimeout = 0 now correctly sets an infinite command timeout. This might help with failures on long-running migrations.
The mysql.data.dll v2 is used from the mysql package (as opposed to v4). The v4 version (probably standing for NET 4.0) does not work under mono 2.6.7, which is still commonly used.
child agents in neighbor regions. This means you can extend
the view on a simulator beyond the default 3x3 regions.
This uses a region default draw distance and should be
replaced at some point by the avatar specified draw distance.
That will require more careful, dynamic recomputation of child
agents every time the draw distance changes.
WARNING: this is experimental and has known instabilities. specifically
all regions "within site" should be running the same default draw distance
or agents will not be closed correctly.
This matches the behaviour for other deletions and stops this operation failing on Windows .NET (though mono is fine with the duplication).
Probably a holdover from copying code from the older legacy adaptor.
Resolves http://opensimulator.org/mantis/view.php?id=5361
This reverts commit e5ce59ff34.
The old module causes a truly massive (double!) rise in connections. Please
put "old guids=true;" back in after this commit
Made FireAndForgetWrapper a singleton class to allow us to drop
dependancy on the BclExtras35 library. BclExtras is broken in
Mono 2.8.2 and we used the library in only one function.
This requires REMOVING the "Old Guids=true" fromt he MYSQL connection strings!
Sorry for the inconvenience, but this version of the DLL is much less buggy
than the new one for production use.
Frontend into a separate region module. Configuration
settings added to the defaults ini file. Others may find
this useful for pushing map tiles to a separate server.
Change the remote Grid region module so that it takes the network connector as a config variable. This allows the region plugin to be reused for both Robust and Simian network connectors.
Configuration option AssetService in section [GridService] must be set to enable this functionality.
Map tiles do currently not show for hyperlinks set in simulators that are connected to grids, see Mantis #5270.
the same thing was actually done for ode.dll a couple of commits ago but I got the commit msg wrong (should have been r1755, not r1754). Damn these fat fingers.
This revision dates from 02 Sep 2010 and has received some testing. This code will be updated in the opensim-libs repository
Updates for libode-x86_64, ode.dll and libode.dylib will follow
WARNING!!! This changes a default. The old default is to allow multiple
presences, the new default disables this. As the feature currently has no users,
this should not present any difficulty and will alleviate the presence
issues somewhat.
This will cause visual params to be persisted along with worn items. With
this, alpha and tattoo laters will be saved. Multiple layers MAY work, but
not tested because I don't use Viewer 2.
Setting this to true avoids a 500ms or so client freeze when the LLUDP server thread is taken up with processing a UseCircuitCode packet synchronously.
Extensive testing on Wright Plaza appeared to show no bad effects and this seems to reduce login lag considerably.
Of course, a lot of login lag is still coming from other sources.
Main reason for upgrade is to revert API change that was introduced in order to support headerless binary LLSD decoding needed for deserialization of the mesh assets, which turned out to be unnecessary as we can transparently decode both kinds.
Adding -logconfig to Robust.exe. will still process the
-logfile option, as before. No options given, the value
"Robust.log" will be written in the ./bin directory
allowing the decoded sculpt map cache path to be defined in
the configuration files.
Use DecodedSculpMapPath in the [Startup] section to set
the path. The default is still ./bin/j2kDecodeCache
* Removed StorageManager
* CONFIG CHANGE: There are no more database settings in OpenSim.ini. Check the config-include configuration files for region store and estate store database settings
Source code is included for reference. This can go away again once Prebuild is updated with a more general mechanism for cleaning up files.
The Prebuild source code here can be built with nant, or regnerated for other tools using the prebuild at {root}/bin/Prebuild.exe
Upgrading Prebuild.exe to correctly construct build solutions
for crossplatform tools such as xbuild, monodevelop and nant.
NOTE: Module prebuild files will need modification to work,
as the prebuild must correctly define the reference path for
all assemblies shipped in the OpenSimulator ./bin directory.
These include assemblies such as XMLRPC.dll, OpenMetaverse.dll,
Nini.dll, etc. . The entries should follow the form:
<Reference name="Nini" path="../../../bin/"/>
See the distributed prebuild.xml for further examples.
Crossplatform tools: xbuild and monodevelop use the
vs2008 OpenSim.sln and the .csproj files in each namespace.
Changes to the Prebuild.exe are against svn 322 and are included
in a patch attached to the mantis. And the dnpb source are
available@ svn co https://dnpb.svn.sourceforge.net/svnroot/dnpb dnpb
The patches are pending application by the dnpb team. After which,
the un-modified upstream Prebuild.exe will work as expected.
These are appropriately licensed and include plant, tree and miscellaneous textures (face target crosshairs, etc).
Many thanks to Nebadon for sourcing and packaging these.
DisableFacelights option to OpenSim.ini to finally kill those immersion-
breaking, silly vanity lights that destroy nighttime RP. Girls, you look
just fine without them. Guys, you too. Thank you. Melanie has left the building.
DisableFacelights option to OpenSim.ini to finally kill those immersion-
breaking, silly vanity lights that destroy nighttime RP. Girls, you look
just fine without them. Guys, you too. Thank you. Melanie has left the building.
As far as I can determine, r3287 + r3294 patch was the previous update to the OpenMetaverse libraries
This change just adds r3378 to overcome problems storing media textures with certain permission combinations in inventory
This is a limited change in order to isolate moap from any other possible libomv update issues
An update to the forthcoming libomv 0.8.3 is expected in due course to replace this
This commit also deletes OpenMetaverse.Utilities.* as it's unused (on the advice of jhurliman).
refers to prim OWNERS. A new option set, Creators_, is added to allow
selection by script creator. For existing installs, this means no functional
change. The warning from my prior commit doesn't apply anymore.
refers to prim OWNERS. A new option set, Creators_, is added to allow
selection by script creator. For existing installs, this means no functional
change. The warning from my prior commit doesn't apply anymore.
This merges AlexRa's work on migration streamlining. This merge is experimental.
If it causes issues, feel free to back out.
Signed-off-by: Melanie <melanie@t-data.com>
This requires a special XMLRPC call, which has to supply the credentials of
a god user (User level >= 200). Disabled by default. Also Adds a configuration
option to set the initial permitted login level.
This requires a special XMLRPC call, which has to supply the credentials of
a god user (User level >= 200). Disabled by default. Also Adds a configuration
option to set the initial permitted login level.
this seems the least evil way forward since mono 2.6 and later will see increasing usage, and this only works with what was SQLiteNG
MAC USERS WILL NEED TO CHANGE REFERENCES TO "OpenSim.Data.SQLite.dll" to "OpenSim.Data.SQLiteLegacy.dll" in OpenSim.ini and config-include/StandaloneCommon.ini (if using standalone)
See the OpenSim.ini.example and StandaloneCommon.ini.example files for more details
This commit also temporarily changes unsigned ParentEstateID values in the OpenSim.Data.Tests to signed temporarily, since the new plugin enforces creation of signed fields in the database (which is what the SQL actually specifies). And change data columns in sqlite is a pita.
I know this is tough on Mac OSX users (since SQLiteNG requires the export of the sqlite3_column_origin_name symbol and this isn't present for the Mac OSX sqlite3 system library)
Unfortunately, I need to shaft somebody (as it were)
Update information in StandaloneCommon.ini.example to reflect this
Remove ISharedRegionModule interfaces from all SimianGrid connector classes temporarily since this stopped standalone from working (due to absence of AssetURI settings, etc.).
Solution here may be to create separate region module connectors as done by local/grid/hypergrid so that loading can be controlled via include files
Or otherwise work out how to stop these modules from being loaded for all OpenSim invocations
Actually using the one built against Net 2.0 (labelled Newtonsoft.Json.Net20.dll) since the 3.5 build is not compatible with Mono 2.4 (though it is with Mono 2.6)
The root cause of this problem was that multiple ObjectUpdates were being sent on attachment which differed enough to confuse the client.
Sometimes these would eliminate each other and sometimes not, depending on whether the scheduler looked at the queued updates.
The solution here is to only schedule the ObjectUpdate once the attachment code has done all it needs to do.
Backport from head.
The root cause of this problem was that multiple ObjectUpdates were being sent on attachment which differed enough to confuse the client.
Sometimes these would eliminate each other and sometimes not, depending on whether the scheduler looked at the queued updates.
The solution here is to only schedule the ObjectUpdate once the attachment code has done all it needs to do.
* Added different ports (8002 and 8003) to the many services in OpenSim.Server.ini.example
* Added a separate OpenSim.Server.HG.ini.example to make it easier to run
* Handle logout properly. This needed an addition to IClientAPI, because of how the logout packet is currently being handled -- the agent is being removed from the scene before the different event handlers are executed, which is broken.
configurable. Previously, estate managers could enter god mode, but would
not have any powers. Now estate managers can enter god mode only if this
option is true, and then will have real god powers.
This merge was very conflicted. I think I got them all, but I can't be sure.
I had to merge to master or risk divergence to the point of unmergeability.
This switch allows scripts to pass messages to modules via the modSendCommand() function
Modules can then send messages back to scripts via the link_message LSL event through
invoking DispatchReply() on OpenSim.Region.Framework.Interfaces.IScriptModuleComms
* Added the RemoteSimulationConnectorModule, which is the replacement for RESTComms. Scenes is not using this yet, only (standalone) Login uses these region modules for now.
* Completed SimulationServiceConnector and corresponding handlers.
* Adds a configurable maximum object mass before the mass is clamped. Default is 10000.01. Configurable by changing maximum_mass_object in the [ODEPhysicsSettings] section.
* Clamping the mass is important for limiting the amount of CPU an object can consume in physics calculations. Too high, and the object overcomes restitution forces by gravity alone. This generates more collisions potentially leading to 'deep think'.
having this enabled results just in warning messages if no message service is actually available
haivng this disabled results in an unexpected failure if no message service is available
This appears to now give better ODE physics response (less sinking into the ground, etc.)
Please change it back if this is actually a bad idea for some reason
* Fixing a bug where the max burst rate for the state category was being set as unlimited, causing connections to child agents to saturate bandwidth
* Upped the example default drip rates to 1000 bytes/sec, the minimum granularity for the token buckets
* Hip offset should have been added not subtracted (it's a negative offset). This puts avatar feet closer to the ground
* Improved duplicate checking for terse updates. This should reduce bandwidth and walking through walls
* Added contacts_per_collision to the ODE config section. This allows you to reduce the maximum number of contact points ODE will generate per collision and reduce the size of the array that stores contact structures
* Commenting out the MySQL startup sequence that cleans out dropped attachments under the advice that it is no longer relevant. If anything, it could be brought back as a database cleanup console command
* Updated to the latest libomv 0.8.0-pre. UUID.TryParse() will no longer throw and catch exceptions for most failed UUID parses
* Added a new [Startup] config option called use_async_when_possible to signal how to run operations that could be either sync or async
* Changed Scene.ForEachClient to respect use_async_when_possible
* Fixing a potential deadlock in Parallel.ForEach by locking on a temporary object instead of the enumerator (which may be shared across multiple invocations on ForEach). Thank you diva
* Avoid allocating an Action<IClientAPI> object every round of the OutgoingPacketHandler
* Removed unnecessary semi-colon endings from OpenSim.ini.example [InterestManagement] section
* Only initialize Util's SmartThreadPool if it is actually being used
* No longer initializing Util's SmartThreadPool with a custom max stack size. From MSDN: "Avoid using this constructor overload. The default stack size used by the Thread(ThreadStart) constructor overload is the recommended stack size for threads."
* Changed Util.FireAndForget() to use any of five different methods set with async_call_method in the [Startup] section of OpenSim.ini. Look at the example config for possible values
* Replaced calls to ThreadPool.QueueUserWorkItem() with ThreadPool.UnsafeQueueUserWorkItem() since OpenSim does not use Code Access Security sandboxing
* OnQueueEmpty is still called async, but will not be called for a given category if the previous callback for that category is still running. This is the most balanced behavior I could find, and seems to work well
* Added support for the old [ClientStack.LindenUDP] settings (including setting the receive buffer size) and added the new token bucket and global throttle settings
* Added the AssetLoaderEnabled config variable to optionally disable loading assets from XML every startup. This gives a dramatic improvement in startup times for those who don't need the functionality every startup
* Moved all priority queue access to helper functions to improve reliability and readability
* New version of CSJ2K.dll (from libomv source tree) that fixes a JPEG2000 comment decoding bug
* Re-added openjpeg-dotnet files since they are used elsewhere in OpenSim * Updated prebuild.xml with a reference to CSJ2K
* Renamed IJ2KDecoder and J2KDecoder member names to follow standard naming conventions * Removed j2kDecodeCache cruft and replaced it with the OpenSim cache system * Rewrote the default layer boundary algorithm to use percentages instead of an exponent * Switched from an infinite in-memory cache to an expiring cache (10 minute timeout) * Slightly quieted logging errors for failed texture decodes
Replacing openjpeg-dotnet decoding with managed CSJ2K decoding. Should be much more reliable, faster, and use less memory
* Re-added openjpeg-dotnet files since they are used elsewhere in OpenSim * Updated prebuild.xml with a reference to CSJ2K
Http-in and makes the host name for URL generation configurable.
Applied with changes:
llGetSimulatorHostname was not changed, because the change breaks
existing behavior and carries a data exposure risk. That value needs
to be configurable, the proposed fixed change is not acceptable.
sweep every 10 minutes. If any texture data is older than 12 hours, it is
regenerated and the memory cache is refreshed. After each decode, the thread
delays for 5 seconds.
setting the path for it. This commit introduces NEW DEFAULT BEHAVIOR. To
retain the old behavior (eternal cache) you will need to change your OpenSim.ini
and set the timeout to 0.
Fixes cookie handling and header name casing in HttpServer
Currently, cookies are never being processed on incoming HTTP requests. This patch makes sure cookies are parsed and inserted into IHttpRequest.Cookies, and fixes incoming headers to always have lower-case names.
http://opensimulator.org/mantis/view.php?id=4052
Add ability to silence IRC relay of region joins and quits from certain users
This is useful for admins who wish to remain hidden, or service bots.
Thanks RemedyTomm
* Hopefully this allows older mono versions to still work.
* A couple of points of note:
* TimeZoneInfo.. replaced with DateTime.UtcNow - TimeSpan.FromHours(7);
* HashSet<uint> replaced with Dictionary<uint,object>
* Force use of the managed version of ReaderWriterLockSlim (don't use the pre-processor defs)
* If this doesn't melt the Http Server, this will significantly reduce the number of threads in use on regions with many users.
* Adds AddPollServiceHTTPHandler, and RemovePollServiceHTTPHandler to BaseHttpServer
* Generic enough to be used for many long poll services, not only the EventQueue.
* Made various changes to BaseHttpServer to accommodate the new interfaces.
* This version has been significantly re-architected and may fail in unusual and insidious ways.
* Please pay attention to any errors you get and post a Mantis if you can reproduce an issue with the HTTPServer. I'm including the pdb and having the http server compiled in debug for a few weeks so that when an error occurs, it'll print the pertenant data.
* Once again, this is the full C# WebServer, not the lite branch that is included in LibOMV (we need SSL!)
this commit finally adds the VivoxVoiceModule: it supports positional
as well as conference call type voice (currently only per region
server), region and parcel voice, speaker indication (LL client
family), direct avtar-to-avatar voice chat. NOTE: you need to obtain
an customer admin account from Vivox to be able to use this module ---
DON'T ask me about how to about an admin account, i've NO clue, we
just wrote this code.
Set av_capsule_tilted to false in opensim.ini. Default is true, so there is
no change in avatar behavior (and no breaking of existing content which
relies on the tilted capsule).
This commit straightens up the avatar capsule so it behaves consistently
(e.g. same collision behavior against prims regardless of which direction
the avatar is coming from; ability to fit through narrow doorways).
Please note this introduces other side effects which have not been fixed.
In particular:
* The avatar frequently falls through the terrain if it is not flat, though
the avatar behaves pretty well on flat terrain. This requires investigation
of the ode terrain collider.
* The apparent foot position of the avatar with respect to the ground
is changed. This requires investigation of the avatar height/capsule height.
Please consider this as work in progress.
option for LLUDPServer. On windows .NET the default socket receive
buffer size is 8192 bytes, on recent linux systems it's about
111K. both value can be a bit small for an OpenSim instance serving
many clients. The socket receive buffer size can be configured via
an OpenSim.ini config option
- adds a general catch clause to LLUDPServer.OnReceivedData() to
prevent it submerging when an unexpected Exception occurs.
This change moves texture send processing out of the main
packet processing loop and moves it to a timer based
processing cycle.
Texture packets are sent to the client consistently over
time. The timer is discontinued whenever there are no
textures to transmit.
The behavior of the texture sending mechanism is controlled
by three variables in the LLCLient section of the config
file:
[1] TextureRequestRate (mS) determines how many times per second
texture send processing will occur. The default is 100mS.
[2] TextureSendLimit determines how many different textures
will be considered on each cycle. Textures are selected
by priority. The old mechanism specified a value of 10 for
this parameter and this is the default
[3] TextureDataLimit determines how many packets will be sent for
each of the selected textures. The old mechanism specified a
value of 5, so this is the default.
So the net effect is that TextureSendLimit*TextureDataLimit
packets will be sent every TextureRequestRate mS.
Once we have gotten a reasonable feeling for how these parameters
affect overall processing, it would be nice to autonmically manage
these values using information about the current status of the
region and network.
Note that this also resolves the pathologcal problem that
previously existed which was that a seated avatar generated very
few in-bound packets (theoretically) and would therefore be the
least able to retrieve the images being displayed by a
projector script.
Several improvements in the connectors themselves.
Several improvements in configurations.
Needed to add a hack in IUserService and UserManagerBase, to be removed when that service is refactored.
See the files: bin/config-include/GridCommon.ini.example and bin/config-include/StandaloneCommon.ini.example to configure and enable this caching method.
See the files: bin/config-include/GridCommon.ini.example and bin/config-include/StandaloneCommon.ini.example to configure and enable this caching method.
exe for each function, rather each function is a connector and the server ini
loads them. If you like your multiple processes, use -inifile with the server.
Otherwise, you get one server process that serves all configured funcions, see
example .ini. The new exe is OpenSim.Server.exe. Clean your bin, loads of names
have changed!
We've encountered problems with textures never fully downloading and
objects not moving or being deleted (from the client's point of view)
even when the bandwidth settings on the client have been set very
low. This can happen over reasonably lossy links (eg you're on the
other side of the world from the server) as the server retries 3 times
and then gives up.
Whilst its possible to set ReliableIsImportant, this forces the server
to keep retrying no matter what which potentially could lead to
problems. This patch allows for the setting of MaxReliableResends
explicitly (is set to 3 normally) in OpenSim.ini so if you know you
will have clients connecting with poor connections you can set it a
bit higher (10-15 works quite well even for very poor connections).
This may break a lot of things, but it needs to go in. It was tested in standalone and the UCI grid, but it needs a lot more testing.
Known problems:
* HG asset transfers are borked for now
* missing texture is missing
* 3 unit tests commented out for now
default but can be enabled in OpenSim.ini. If enabled, things can be sold
for $0. Other amounts will cause the buyer to see a message and the transaction
will fail.
- AssetType isn't InventoryType. Those enums contain different numbers. Use AssetType for the asset type, InventoryType for the inventory type.
- The ToString method (or ToLower) of AssetType/InventoryType doesn't necessarily return the correct LLSD string.
- Replaced several magic numbers by their corresponding enum.
- Fixed the invType for gestures and animations in the library.
This should fix Mantis #3610 and the non-terminating inventory loading
Move json stats to non-published resource name
Remove well-known resource name for json stats,
creating dynamic uris with private keys and add
a user configurable resource name for region owner usage.
Different people using Hippo 0.5.1 report that trying
to send group instant messages crashes the viewer
(Hippo 0.5.1). This is the case even for empty groups
or if all group members are online.
Don't allow packets to be resent before they have actually been sent for the
first time. Switch from serializing a packet to get it's length to the LibOMV
provided Length property. Fix resend timing. Fix the use of dangling references
to Acked packets. Fix the packet handler to play nice with the packet pool.
Fix the packet pool. Add data block recycling to the packet pool. Packet pool
is now ENABLED by default. Add config option to disable packet and data block
reuse. Add ObjectUpdate and ImprovedTerseObjectUpdate to the packets being
recycled.
The attached patch provides the necessary infrastructure to support
security and authentication features of the xmlrpc server.
* Read/Write keys for accessing a Group's xmlrpc service.
* Requiring user session verification for write operations.
- Adds an admin_modify_region call to allow changing of parcel voice
settings and changing of public/private status
- add boolean "public" and boolean "enable_voice" to
admin_create_region XmlRpc call to allow specifying of
public/private status and to allow enabling voice for all parcels;
also added config variables to allow setting of defaults for those
- fixing cut-and-paste artefacts
* Refactors the xmlrpc calls to a single location to
make it easier to debug and include alternative
xmlrpc call mechanisms
* Includes an alternative xmlrpc call mechanism that
sets HTTP Keep-Alive to false which solves nearly all
System.Net exceptions on some windows environments
Added is a patch that adds a rough Groups implementation. This patch allows
the creation, adding and maintaining Groups, Roles and Members. Work has begun
on a very naive implementation of messaging, and minimal support for notifications
{no attachments yet}. Proposals are not yet supported, but are on the to-do list.
This implementation is not active by default, and must be configured in
OpenSim.ini to become active.
* Tweak the LLSetStatus results in the ODEPlugin. Hopefully it's a little less unstable.
* ODEPlugin is using experimental math for LLSetStatus, use with caution! :)
Fixes Mantis #3421
Change the agent/avatar events subscriptions to just OnNewClient. The data only needs to be sent once and keeping track of log ins/movements is not required. This will also send cloud data to child agents so that they can see clouds above neighbouring regions not just regions that they have visited.
- Change several classes to use the new plugin for handling of region-modules
(NOTE: No regionmodule is using this yet)
- Add necessary prebuild parts (don't forget to runprebuild)
Attention: Work in progress. This shouldn't break anything, but you never know...
* It's not ready to try. It doesn't do what you expect in many ways.
* It throws errors and prints jibberish on the console
* Test it out only if you're brave and you've backed up first.
* The opensim.ini line is physics = BulletDotNETPlugin
Added safemode config to Standalone Hypergrid, similar effect to AllowRegionAccessToInventory in Inventory Server. Everyone should have these vars set to their default values except me!
With some support from HomerH, this patch adds support for Wind
Model plugins via the mono.Addin framework.
* Adds console & OSSL access to Wind Parameters
* Adds plug-in support for custom wind models
* Provides two example Wind Model plug-ins
Documentation for the wind module is temporarily located at http://code.google.com/p/flotsam/wiki/CoreWindModule [^]
-- will move this documentation to http://opensimulator.org [^]
after the patch has been committed.
* Important: HttpServer.dll was changed to HttpServer_OpenSim.dll so that the HttpServer references do not conflict if you've copied the OpenMetaverse.Http.dll and requirements to the OpenSimulator bin folder.
This means that if you reference HttpServer.dll in any projects, you will need to change the reference to HttpServer_OpenSim.dll. It still uses the Same HttpServer namespace though.
Attached is a patch which enabled through an OpenSim.ini option the ability
to read long notecard lines. Currently although the data is read from
the notecard it is truncated at 255 characters (same as for the LL servers.
This patch allows the setting of that limit to a different value.
; Maximum length of notecard line read
; Increasing this to large values potentially opens
; up the system to malicious scripters
; NotecardLineReadCharsMax = 255
this allows for save/restore functionality using notecards without
having to worry about very short line length limits.
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
* Updated code to compile against MXP 0.4 version.
* Cleaned up field naming conventions.
* Added support for logging in with region name.
* Filled in new fields of JoinResponseMEssage.
* Added support for SynchronizationBeginEvent and SynchronizationEndEvent.
* Commented out periodic debug log.
* Added networking startup log messages.
This closes mantis #3277
* Updated MXP to contain extension fragment with prims and updated MXPClientView to fill in the parameters.
* Added google protobuffers dll.
* Update MXP dll.
* Updated MXPClientView to send prim parameters as Perception event extension
* Started OpenSim and connected with IdealistViewer via MXP and ensured from log that parameters are being sent.
* Ensured that nant test target runs succesfully.
This closes mantis #3229. Thanks, tlaukkan!
* Handled via the MXPModule.cs located in OpenSim.Client.MXP namespace.
* Also implements MXPClientView and MXPPacketServer for IClientAPI compatibility.
* No changes were required to Core to implement this - the thing is self contained in OpenSim.Client.MXP.dll.
* Includes reference implementation of MXP as MXP.dll - this is under the Apache 2.0 license.
* Requires OpenSim.ini setting to enable. "[MXP] \n Enabled=true \n Port=1253"
* May break. Highly untested.
The built-in default is OpenSim, unless a user server url is given, then
that is used, unless "shard" is also goven, then shard takes precedence.
The defult in OpenSim.ini is "OpenSim" for compatibility.
* Something that thus needs fixing is the fact that ProjectReferences has to be marked
<ProjectReference>
<Private>False</Private>
</ProjectReference>
but that is not configurable in the upstream Xml Schema. I've hardcoded it in our repo for now.
* Applied upstreams changes to allow for auditing and debugging in our various environments.
* This should, in theory, bring back 'multiple ref dirs'.
* Temporarily Removed xmlns because prebuild-1.7 schema does not allow for multiple solutions per prebuild node (This will be a moot issue once the Prebuild node is moved out of prebuild.xml)
* Autotools target: Various minor fixes
* MonoDevelop Target : No changes.
* Nant Target: Various minor fixes, support for net-3.5 and mono-2.0/3.5 targets
* Sharpdevelop targets: No changes.
* VS Targets: Refactored into using VSGenericTarget, and supports 2.0-3.5
* XCode Target: No changes.
--- Regressions and outstanding issues ---
* The Solution is assigned a random Guid - will lead to unnecessary reloads and loss of user settings.
--- New features of Prebuild 2.0.4 ---
* (Better) support for Web, WinForms and Database Projects and build actions
* Conditional Framework Version compilation support (1.1, 2.0-3.5)
* ArrayList -> List<>, ICollection -> IList
(this means Prebuild can generate 1.1 solutions, but can't itself be built under 1.1 - how very meta)
* Added <?include file="sub_prebuild.xml" ?> preprocessor directive.
I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
AssetInventoryServer with the standard OpenSim license header
- add note about Cable Beach to CONTRIBUTORS.txt
- clean up AssetInventoryServer.ini.example
This changeset add the RegionReady module code. The module sends a
message on a configurable channel when an oar file has finished
loading or if the script engine has emptied its queue for the first
time (eg server startup). Config is something like this:
[RegionReady]
enabled = true
channel_notify = -800
The module also knows if there was an error with startup.
* This adds more explanation for the new proxy settings in OpenSim.ini.example
* Also does some formatting correction
* I did some additional reformatting on top of that
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
* Adding an option to use the tree module to manage the trees in the simulator (grow/reproduce/die)
* Setting it to off by default in an effort to reduce the number of threads in use by default
* You can also turn it on in a 'one off' way with 'tree active true' on the console. To 'one off' turn it off, it's 'tree active false'. The permanent way to do that, however is in the opensim.ini.
* Added Npgsql.dll and Mono.Security.dll which are NpgsqlDriver dlls.
* Added missing field to schema creation scripts: PathTaperY.
* Added schema creation scripts for PostgreSQL.
* Added unit test classes for PostgreSQL.
* Added schema creation script folder to NHibernate project in prebuild.xml
* Added Npgsql.dll to NHibernate test project dependencies in prebuild.xml
* Ensured that build works with both nant and Visual Studio.
* Executed build unit tests with nant and NHibernate unit tests with NUnitGUI
- Couple of region tests fail due to double precission float rounding errors need to sort out how these are handles in unit tests and if higher precission numeric field needs to be used in Postgresql.
* Adds a prototype web stats module which is disabled by default. It's functional with one report right now, however, the database structure may change, so I don't recommend enabling this to keep actual stats right now. I'll let you know when it's safe.
* Adds Prototype for ajaxy web content
* removed a warning or two.
- Adapted code to match the corrected signatures
- Fixes Mantis #2934. Hopefully.
Note: Physics on linked objects still don't work correctly:
It doesn't crash the region anymore, but the example object in
the mentioned mantis now falls through the ground.
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
* http://www.codeplex.com/webserver/WorkItem/View.aspx?WorkItemId=3110 fix erronious call to beginread that caused an exception which was caught and ignored (increase performance)
* Pass socket into httpclientcontectImp and call the disconnect + reuse method so the socket can be reused quicker (increase performance)
* Ensured that in every error scenario beginAccept is called (stability)
* Fixed header casing (standards compliance)
* Fixed Connection: close handling (standards compliance)
The attached patch ads an OpenSim.ini option (AutomaticLinkPermission)
which when enabled makes PERMISSION_CHANGE_LINKS to be granted to
scripts by default. When enabled llGetPermissions will always return it
as granted and llCreateLink//llBreakLink will succeed without
doing llRequestPermissions. ONLY ENABLE THIS IN TRUSTED ENVIRONMENTS.
The patch also fixes a minor bug in llCreateLink
related to a potential dereference of a null client object.
* Disabled by default (see OpenSim.ini.example for how to enable)
* Saves exceptions to a folder on disk (default "crashes") when enabled.
* These reports can then be uploaded or posted to help debug an error.
* This patch gets NHibernate working
*** PLEASE NOTE: This patch now requires the libmono-oracle2.0-cil library to be installed on Ubuntu (to stop the System.Data.Oracle missing failure) ***
* Not sure what the dependency is on other distros. Adding this info to http://opensimulator.org/wiki/Build_Instructions would be most welcome
* Adds Castle.* libraries that were missing last time (note, dlls have been added from http://downloads.sourceforge.net/nhibernate/NHibernate-2.0.1.GA-bin.zip)
* This resolves problems on Linux detailed in http://opensimulator.org/mantis/view.php?id=2734 where System.Data.Oracle libraries can't be found
* On a quick look I can't see that these exist on mono 1.9.1
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
* This allows one to override normal OpenSim permissions and prevent non-gods from editing any scripts. This allows edit ability
to be rescinded after it has been given, and prevents the security hole where a single script with liberal perms would allow code changes.
* The default setting remains the existing one of never overruling normal edit permissions.
* These two settings may be enough to stop non-gods entering artbirary script code in a closed grid/standalone configuration.
causes defautlt behavior. "true" now means usable unconditionally, "false"
means disabled, and a list of UUIDs restricts it.
This changes SECURITY! If you used "true" here before, you shoudl review
your setup!
Objects will be persisted now MinimumTimeBeforePersistenceConsidered seconds
after the last change, but latest MaximumTimeBeforePersistenceConsidered after
the first change (both are configurable in OpenSim.ini.example and are set to
60 and 600 as default).
* This doesn't allow complete script lockdown of a sim, many avenues (copying, editing) are still uncloseable at the moment
* Default remains to allow all users to create scripts (subject to existing permissions if enabled)
* Switch default for serverside_object_permissions from false to true - it seems more natural that we enforce permissions by default rather than not!
* Add some explanation in OpenSim.ini.example for serverside_object_permissions
will allow people who don't want megaprims in their sim to prevent them
from being created. Any prim rezzed or pulled across the border will be
clamped to the size specified in OpenSim.ini if this option is set.
regions that XmlRpcCreateRegion will create: if region_limit is != 0
then XmlRpcCreateRegion will only create a new region if the number of
regions already existing is below region_limit.
* Licensed under MPL License.
* Adding to be used in the AssetCache, this cache allows you to do things like specify rules on when cache items should be removed (ie 24 hours since last access, etc).
* No code changed in this commit.
* Really this should be 1, but I think that this would be too slow compared to a Second Life server until we improve our ability to send textures of variable quality
* This may improve one aspect of sim performance where there are many avatars. However, there are still other performance problems that are unrelated to this change
* Value may be further tuned
* Removed temporary decals since the multipler setting will stick around now
* Inserts proper animation state names into data/avataranimations.xml file so that llGetAnimation() works as one would expect.
* Thanks StrawberryFride!
* This should probably be 1, but currently by default it is 8, to reflect what was being eon3 in OpenSim before this revision. So if the client requested a maximum throttle
of 1500 kilobits per second, we would actually send out 1500 kilobytes per second
* Adjusting this multiplier down towards 1 may improve your OpenSim experience, though in other situations it may degrade (e.g. if you're using a standalone over high bandwidth
links)
* This is currently a user setting because adjusting it down may currently reveal other OpenSim bugs.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
logic to ConciergeModule. adding XmlRpc method to allow update of
welcome template for a region. documenting [Concierge] "password"
option in OpenSim.ini.example.
chat relaying via private channels, and old IRCBridgeModule
behaviour. also cleaning up IRCBridgeModule's OpenSim.ini
configuration variable names (still supporting "old" variable
names). refactored IRCChatModule into IRCConnector and incorporating
watchdog from IRCBridgeModule into IRCConnector.
enabling ChatModule to be used as a super-class and utilizing it in
ConciergeModule.
* This allows multiple user profile providers to be specified in OpenSim.ini separated by commas
* If multiple providers are specified then a request for a user profile will query each in turn until the profile is either found or all have been queried
* Unfortunately I don't believe this order can currently be specified, which if true is something that will need to be fixed.
* Thanks to smeans for the original patch.
* If you're experiencing knee bendiness try the windows settings, as the *nix settings seem to now be incorrect. (this update does that, but you may have your own opensim.ini settings active.
* Mac users, pray to chi11ken to make you a .dylib version
* This is semi-tuned and post teravus hack. (Though I didn't apply the terrain pitting fix hack. I'm still deciding if it's necessary as there was a lot of work over the past several months on the heightfield collider.
* Please use '--enable-shared --disable-demos --disable-asserts' if you are building your own libode in the configure step. Asserts are pretty much useless for use with .NET
* This also updates ODE.NET as, there were some API changes in May that were just added to ODE.NET today.
See mantis #2379 for some useful scripts that work with this.
Note that I added another configuration parameter in addition to the patch to allow for legacy behavior in the absence of new configuration settings.
* Switched it on by default
* Updated OpenSim.ini.example to reflect this
* Caught a UDP Server issue that occurs when the network pipe is saturated
* Still experimental :D
* This is a HUGE update.. and should be considered fraut with peril.
* SSL Mode isn't available *yet* but I'll work on that next.
* DrScofld is still working on a radical new thread pump scheme for this which will be implemented soon.
* This could break the Build! This could break your Grid!
* If EventQueueGet is enabled, use that instead of a few UDP packets, if it's disabled use the UDP packets like normal.
* We *really* suggest users do not turn on EventQueueGet yet.. as it's highly experimental, broken, and resource intensive
* Updated OpenSim.ini.example
* Testers of EventQueueGet.. in OpenSim.ini, it's in the [Startup] Section.. change EventQueue = false, to EventQueue = true.
* A little wind wouldn't hurt anyone, right? This is the 'slightly breezy' setting.. hopefully you won't notice 'much' of a difference.
* It turns out the terrain patch routine is similar enough to the wind version that it can be used to hack together a breeze generator with a few mods.
* Not much configuration.. yet. You only get breeze updates in the general vicinity of your camera now to keep bandwidth usage down.. and we're not talking about 'much' movement at the moment.
* initial version... could use improvement I'm sure.
ordinary region modules and are able to coexist in one instance.
See http://opensimulator.org/wiki/ScriptEngines for details. There were
changes to OpenSim.ini.example, please note DefaultScriptEngine.
Also see the User docs and FAQ on the Wiki. Default is DotNetEngine.
* There are still a lot of things that are hard coded to use http. They need to be fixed.
* Also includes directions
* A standard junk PEM file to append to app_settings/CA.pem in the client so SSL will work
* Testers, please try rezzing your inventory on this revision and sending me feedback in mantis.
* Users, it's not time to update yet. The dust still hasn't settled.
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
The option to enable the REST Asset and Inventory plugin is missing
from OpenSim.ini.example. This patch adds the required items without
enabling the plugins.
at 1.0, it allows delays to function as coded. Smaller values will
reduce, larger values will increase the delays. A value of 0 is
permitted and results in on delay being applied.
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
* By default, texture rendering is on. This may be affected by using secure assets since your region hasn't registered with the gridserver before it asks for texture assets. It might also be affected by a slow asset server, so consider this release experimental.
* Defined interface IMapTileTerrainRenderer.
* Extracted "old" shaded maptile terrain rendering into ShadedMapTileRenderer;
streamlined it a bit and added "highlight" rendering to its "shadow"
rendering.
* Added "new" terrain-texture based maptile terrain rendering
(TexturedMapTileRenderer); made TerrainUtil.InterpolatedNoise public
* Adapted MapImageModule to allow switching between those two by configuration
* Added configuration option to OpenSim.ini.example
as those all work with MySQL (and are in fact required it seems);
adds examples as well
- adds region_file_template functionality for the create_region XmlRpc
call of RemoteAdminPlugin
- cleans up and fixes typo in UserProfileData
Reverts the deletion of the entry for "My Site Library" in
bin/assets/AssetSets.xml and replace with with "Open Textures Library"
pointing to "OpenTexturesLibrary/3DDCInventoryItems.xml"/.
I don't think this is the only problem with avatar appearances though, as I've still seen the puffs of smoke even with that texture set correctly. Seems that anytime where before you would have seen a grey ruth, you now get a puff of smoke. So looks like a urgent drive is needed to fix the avatar appearance system.
out everything in the [GridInfo] section :-D Also, not yet LLSD but
XmlRpc, LLSD via GET will follow. OpenSim.ini.example contains sample
values and explanation. Oh, and default values provided are
platform: OpenSim
mode: standalone | grid
have fun.
Add a config option to OpenSim.ini to select between script compilers
in the XEngine without recompile.
Set UseNewCompiler=true in OpenSim.ini and try it out.
Creates the ICodeConverter interface and adapts the new compiler to it.
* It isn't perfect since the blocks are square, however it's pretty good.
* Performance is also pretty good, however, if it takes too long for you, you can disable it in the OpenSim.ini
* You can see how long it takes in milliseconds on the console when it finishes.
a clean interface for Sim broadcasts. Added SimBroadcast support to
ChatModule.
Removing all code from IRCBridgeModule dealing with agent/client directly.
Cleaning up ChatModule.
Polishing IRC messages, adding support for "/me" (both directions).
* This includes if you want to mesh sculpties and the Level of detail on the sculptie meshing for non physical and a separate LOD on physical sculpties.
* The options range from gravity.. to avatar movement speed, to friction management.. to object density.. to update throttling.
the attached patch set adds the (still work-in-progress but already
working) RestPlugin base class and the RestRegionPlugin code. we are using
XML serialization.
currently working:
GET /admin/regions/ -> returns UUID list of known regions
GET /admin/regions/<UUID> -> returns detailed region information
we'll be adding support for POST/DELETE/PUT and also for
/admin/regions/<UUID>/name etc.
* Added shell of new Python scripting engine. Similar in design to the one used by Rex, but will be structured at a region rather than object level, also is a region module.
* Currently if you apply that to only one or two axis you get unpredictable and sometimes explosive results.
* Three axis works well enough to play with it anyway. More work is needed here.
* Fixed an incorrectly named method in ODE.NET
* See OpenSim.ini.example settings for how to use
* Only compatible with svn:// and http:// authentication for the moment (and only using simple authentication). SSL/SSH key support is supported by the library used (SvnDotNet), but is not yet supported in OpenSim.
* Use the command "svn save" to make a copy of your regions to SVN. Presently this is not an automatic process, but such a feature is on the todo list.
* It will in your repository create a subdirectory for each region with the regions UUID, inside there it will create a 'terrain load' compatible 'heightmap.r32', and a load-xml2 compatible 'objects.xml' plus information files.
* Untested on Linux, some compatibility work may be needed by Linux peoples. The dependencies will be the same as for SvnDotNet which is supposedly mono-compatible.
ansgar and i have been working on an asterisk voice module that will allow
us to couple opensim with an asterisk VoIP gateway.
the patch below consists of
* AsteriskVoiceModule region module: alternative to the plain-vanilla
VoiceModule, will make XmlRpc calls out to an asterisk-opensim
frontend
* asterisk-opensim.py frontend, living in share/python/asterisk, takes
XmlRpc calls from the AsteriskVoiceModule
* account_update: to update/create a new SIP account (on
ProvisionVoiceAccountRequest)
* region_update: to update/create a new "region" conference call
(on ParcelVoiceInfo)
* a asterisk-opensim test client, living in share/python/asterisk, to
exercise astersik-opensim.py
this still does not give us voice in OpenSim, but it's another step on
this path...
attached is a patch set that
* adds further robustness checks for the CreateUser and CreateRegion
XmlRpc
* fixes SceneManager.TryGetScene(IPEndPoint, Scene) --- contrary to my
expectation IPEndPoint.Address is not sufficient for a comparision,
IPEndPoint.Address.Address (the long representation) does work
however.
* add [RemoteAdmin] section to OpenSim.ini.example
* fixes XML doc comments
good night,
dirk
* A few things for testing.
* This makes a modification to the region registration with the grid server so that the region can send it a chosen password to identify itself. It will not cause any errors, if either one are not updated.
* Several people have asked for a way to limit uploads, so I've decided to show people how to do this in the BetaGridLikeMoneyModule.
* Configure it in OpenSim.ini using the [Economy] header. See the bottom of the OpenSim.ini.example for more information.
* This also fleshes out the Economy API a bit more.
* This patch removes voice code into a region module. This required the implementation of events and other code to allow region modules to register their own caps handlers, and should allow different voice module implementations.
* CAVEAT: This does not provide complete voice support, it merely provides the hooks so that it can be plugged in.
* (and Ansgar/Ansi)
* Fleshes out the voice stubs to better interact with the viewer CAPS requests - no actual voice support yet!
* In his own words
"the attached patch enhances the existing voice support by returning a proper voice account user and password and is preparing the config file so that we can specify a SIP server (not yet working). currently the SIP is hardcoded. the next step is to refactor voice support into a region module. working on that. "
* Added the new mapper to the mapper factory
* Made choice of mapper configurable
* This means, in hteory, that we can persist avatar appearance on MSSQL as well
* If you compile your own libraries, be sure to follow the updated directions on http://opensimulator.org/wiki/PhysicsEngines
* The previous libs are now -debug for people who wish to work on the ODELibrary and want the feedback.
* See OpenSim.ini.example for more details
* The old sqlite/mssql settings were redundant and effectively ignored anyway. Hence, there's no need for you to change your current settings, which will still work
* In fact, asset_database should probably be moved to [Network] since it's meaningless for standalone installations
* Added the DataBlockExtended From the Message Template Data Block to the Media Update Request manually.
* Set TickCount public from internal (whenever LibSL regenerates _packets_.cs this needs to be done)
Changed the public IsAdministrator back to protected,
now checks Config to see whether it is allowed to run or not.
Defaults to false (not allowed).
To use add the following to OpenSim.ini
[LL-Functions]
AllowosConsoleCommand=true
Added some info to failure on GridServices listening port so people can see what actually went wrong.
Moved most of the function/event execution module to a baseclass so other execution methods (instead of reflection) can be used with custom script modules run by ScriptEngine.Common.
+ some accumulated patches
* Patch 1 stops OpenSim.32BitLaunch.exe and ScriptEngines/Default.lsl being deleted on nant clean
* Patch 2 resolves a building problem with pCampBot
* This will require a prebuild rerun
* Made regions table name configurable (MSSQL only)
* Added a note in ini.example pointing out that the sql resources have to change if you change table names
* Removed duplicate picker method from GridData interface
[Provided by openlifegrid.com]
* Updated the ode.dll for windows with a more reasonable stack space reserve. Linux users will need to type ulimit -s 262144 before starting up OpenSimulator if using Physical Prim to protect against stack collisions. or run the included ./bin/opensim-ode.sh to start up OpenSimulator in ODE mode.
* Added internal collision score and am keeping track of 'high usage' prim.
* Tweaked collisions some more
* Tested up to 460 physical prim in extremely close quarters (which was previously impossible in OpenSim). After 460 in tight quarters, physics slows down enough to make it hard to do any moving, however.. non physics things still work, such as logging on to the simulator, etc.
To use, see the appearance section in opensim.ini.example, set "persist = true", then add the correct connection string for your database.(see mysql-AvatarAppearance.sql in share folder for a example of the table mysql table structure).
This could possible be used in a very small grid, but would mean each region server would need to connect to the same mysql database.
But the work to move the code to one of the grid servers shouldn't be too much.
CONFIG SET section key value value value
CONFIG GET section key
CONFIG SAVE (it saves, but does it save correctly?:)
ScriptEngine will react correctly to any config change made while it is running.
Added option to try alternate UDP ports if the one configured is in use.
UDP packets are now bound to the actual outside IP address and hopefully won't "randomly" select IP on multihomed systems.
OpenSim.32BitLaunch.exe is a 32-bit application that loads OpenSim.exe using .Net framework, hence it is JIT-compiled to 32-bit.
Use this app to start OpenSim on 64-bit systems (works great on Vista 64 :))
Added VISUAL BASIC.NET-support
//cs, //lsl and //vb as first characters of script will determine what compiler is used.
Compile warnings are no longer treated as errors. Script will still run.
Added a few useless and useful config options:
Write script source to harddisk for debug, Default compile language, Allowed compilers (languages), compile in release or debug mode, clean up old scripts on startup
Loads of warnings for incorrect config
Added comments and regions, restructured code
Changed a lot of AppDomain junk from console from using Console.Write to Log.Verbose and set it to #if DEBUG
All modules should now refresh their configuration runtime
Made all logging in ScriptEngine.Common get script name from actual engine
Renamed LSLLongCmdHandler to AsyncLSLCommandManager
Added auto-recover with 5 sec throttle for new MaintenanceThread
Bugfix: Scripts exceeding max and set to be killed were not killed, only removed.
Added ability to re-read configuration while OpenSim is running
All regions now sharing one MaintenanceThread
New MaintenanceThread:
- checks for script execution timeout
- re-reads config
- starts/stops threads if thread active count becomes too high/low compared to config
Speed increase on event execution:
- Reuse of try{}catch{} blocks
- Time calculation on event execution
* Persistence of things apart from scripts will be implemented later on - I at least want to do some work with asset server stats so loading can be monitored first.
* No MSSQL implementation as of yet
* Progress can be followed at http://opensimulator.org/wiki/OpenSim:Prim_Inventory_Persistence
* Please let me know if you see issues resulting from this change.
* Don't forget, you need -loginuri *and* -loginpage
* Ex: -loginpage http://10.1.1.2:8002/?method=login -loginuri http://10.1.1.2:8002/
* The ?method=login is important, don't forget to add it
* If you customize your http_loginform.html file, be sure to keep the form post address as is.
namespace to mirror what is done with MySQL. This will require a
configuration change for people using SQLite for prims which is given
as an example in OpenSim.ini.example
* Added the web_login_key to the users table
* Added happy configurable http error message pages
* This update is large enough to have 'awe' value.. so backup your users or weep.
* Not tested on MSSQL, even though I added code to update the tables!