* Sometimes, null is a valid return value to indicate 'none found'. doh.
* Sometimes, the Grid server does not send simURI - this you need to reconstruct yourself. Euw.
(I believe) this solves mantis issue #3287
- move a couple constants from InventoryArchiveConstants to
ArchiveConstants, now only one of these is needed
- change InventoryArchiveConstants references to ArchiveConstants
- remove InventoryArchive AssetInventoryServer plugin dependency on
OpenSim.Region.CodeModules
- trim trailing whitespace
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
* Finally got to the point where I could pull up the CustomiseResponse function. Major de-duplication.
* Introduced FromRegionInfo on RegionProfileData
* This revision needs both grid and standalone testing galore.
Work in progress!
* A saved archive now immediately expires the data in the asset cache that it used, rather than retaining all the assets (esp textures) in the cache.
* This is an imperfect solution. Ideally we would only expire the assets newly requested for the archive (not existing ones). But doing that would require a lot more
restructuring.
* I don't believe there are any locking issues due to the locking performed by the underlying memory cache, but please report any issues.
There were multiple tests in one test method (T011_Auth_Login). This
test has been refactored into multiple tests. Common setup code was
placed into a SetUp method executed before each test.
Recent changes in the code handling login_to_simulator XMLRPC method
calls caused two tests to fail because not enough parameters were being
supplied with the method call. The parameters added in this patch work,
but I'm not sure whether they are actually correct or even relevant.
Diva, please look over this.
Changed OpenSim.Framework.Communications.Tests.LoginServiceTests to use the LLStandaloneLoginService (from the LLStandaloneLoginModule) rather than LocalLoginService. Really these login tests should most likely be somewhere else as they are testing specific implementations of login services.
Commented out the old LocalLoginService as its no longer used, but want to check there are no problems before it gets deleted.
Added a flag (bool m_autoCreateLindenStack = true) which says if the ClientStack will be autocreated and initialised when creating regions. This helps with moving ClientStacks to Region modules.
Currently this flag is hardcoded to true, as it is only for testing at the moment, so you need to change the value in the code if you want to turn off auto creating.
Also in that plugin it registers the IUserService with all the Scenes (as they are created). So now we can start changing over all uses of IUserService, that currently access it from the CommunicationsManager to accessing it from the Scene.RequestModuleInterface call.
Once that is done we can move the UserService creation out to its own plugin and remove all references to it from the CommunicationsManager. Then we can take the next CommunicationsManager interface and repeat.
Added a ApplicationRegistry to OpenSimBase.
Changed LoadRegionsPlugin so it registers itself to that application registry.
Added a event to LoadRegionsPlugin, that is triggered when it creates a new scene ,although maybe this event should actually be in opensimBase incase other plugins are creating regions (like the RemoteAdminPlugin).
- handle GetUser request for nonexistent user gracefully
- include throttle levels in ClientInfo
- code to save/restore throttles in client stack
- only update/send updates to active clients
- make animation classes serializable
* Moves Entity Updates into a seperate thread, allowing for OpenSim to utilize a computers CPU more effectively in return for potentially greater user and prim capacity.
* Removes an expensive Sqrt call performed during Update on each object. This should lower CPU requirements for high-prim regions with physics enabled.
* MXP Changes: Centers the region around 0,0 for primitives instead of 128,128. Prim display should now look more correct for MXP viewers.
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
* Added estate ban table to migration scripts of all supported databases.
* Added nhibernate mapping for EstateBans property of EstateSettings
* Refactored property accessors for EstateBan object.
* Added comments for EstateBan properties.
* Ensured that NHibernate tests pass with NUnitGUI.
* Ensured that nant test target passes.
This fixes mantis #3210. Thank you, tlaukkan!
* Not locking causes enumeration exceptions as described in this matis
* part.TaskInventory needs to be locked for every access as it's a dictionary
* Extra locking will hopefully not cause any major issues - in places where the enumeration of the dictionary performs other lock or long running operations, the dictionary is
cloned instead
I've changed the extension point name, and the internal references that
used the same string. I also fixed up the messaging around the asset
loader so that it is more explicit.
Known issue: after TP, the self client doesn't see the animations going, but others can see them. So there's a bug there (TPs only, crossings seem to be all fine).
Untested: did not test animation overriders; only tested playing animations from the viewer.
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
The change makes two principal implementation changes:
[1] It removes the hard coded set of possible asset server client
implementations, allowing any arbitrary implementation that has been
identified to the PluginLoader as an appropriate extension. The
extension point for asset server client extension
is /OpenSim/AssetServerClient. All of the old configuration rules have
been preserved, and any of the legacy configuration values will still
work as they did before, except the implementation is now loaded as a
plug-in, rather than as a hard-coded instantiation of a specific class.
The re-hashing of IAssetServer as an extension of IPlugin made upgrading
of the implementation classes a necessity.
Caveat: I have not been able to meaningfully test the crypto-grid
clients. I believe they should work correctly, but the refactoring
necessary to handle plug-in based initialization (vs constructor-based
initialisation) admits the possibility of a problem.
[2] The asset cache implementation, previously introduce as a hard-code
class instantiation is now implemented as an IPlugin. Once again the
previous (configurationless) behavior has been preserved. But now it is
possible for those interested in experimenting with cache technologies
to do so simply by introducing a new extension for the asset cache
extension point (/OpenSim/AssetCache).
I've tested all of the configuration settings, after applying the patch
to a newly extracted tree, and they seem to work OK.
interface. Shared modules will now only get added once, so the command
handler is called once per module, not once per scene. Removal of scenes
has no adverse effects. Nonshared modules will be called for each scene.
These changes replace all direct references to the AssetCache with
IAssetCache. There is no change to functionality. Everything works as
before.
This is laying the groundwork for making it possible to register
alternative asset caching mechanisms without disrupting other parts of
OpenSim or their dependencies upon AssetCache functionality.
line editing, context sensitive help (press ? at any time), command line
history, a new plugin command system and new appender features thet let you
type while the console is scrolling. Seamlessly integrates the ICommander
interfaces.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
* Typing help will now give a list of these topics at the top (as well as the rest of the current help stuff)
* Typing help <topic> will give information about commands specific to that topic
* This option makes OpenSim use the usual db based asset service in standalone, and the grid based one in grid mode
* The other options can (local, grid, etc) can still be used explicitly as before
* Also change OpenSim.ini.example and the surrounding explanative text
sceneB
* However, I'm not convinced that the actual process in the test completely reflects reality, and a lot of stuff had to be rigged up (which should get resolved over time)
I'll be writing some instructions on its use as part of a more general article on various methods of creating better initial avatars for new users. Which will include some code samples, but as each grid has its own requirements, there will be no out of the box solution included.
* Adds a prototype web stats module which is disabled by default. It's functional with one report right now, however, the database structure may change, so I don't recommend enabling this to keep actual stats right now. I'll let you know when it's safe.
* Adds Prototype for ajaxy web content
* removed a warning or two.
- Introducing synchronous Teleports. Now the receiving region calls back the sending region after the client has been made a root agent there, that is, after client sends CompleteMovement to the destination.
- SendCloseAgent moved from OGS1 Remoting to RESTComms.
* This means that you can now save terrain textures, water height, etc.
* Estate settings are not supported
* Older OAR files without these settings can still be loaded
* This allows configuration of the assetset and library control file paths to be other than ./inventory/Libraries.xml and ./assets/AssetSets.xml
* This is controlled via the LibrariesXMLFile and AssetSetsXMLFile configuration settings in [StandAlone] in OpenSim.ini (in standalone)
and via the user and asset config xml files for grid mode
* Thanks to SirKimba for the patch
* http://www.codeplex.com/webserver/WorkItem/View.aspx?WorkItemId=3110 fix erronious call to beginread that caused an exception which was caught and ignored (increase performance)
* Pass socket into httpclientcontectImp and call the disconnect + reuse method so the socket can be reused quicker (increase performance)
* Ensured that in every error scenario beginAccept is called (stability)
* Fixed header casing (standards compliance)
* Fixed Connection: close handling (standards compliance)
* This facility allows you to save changes to an object that you've rezzed into a region back into their original inventory item without having to take a copy of the rezzed
object.
aggressive at nixing the user out of the cache. We're now relying on NeedSceneCacheClear to decide
whether to nix it or not. All other mods in other files are for better debugging messages.
some of our DNS/dotted decimal issues that plague teleporting.
We are increasing the MajorInterfaceVersion from 1 to 2 in the
gridserver, so sims will need to be updated on various grids.
* This means that UserProfileCacheService no longer needs to know about IClientAPI and can leave it to callers to do their own error logging
* This is also more consistent with the way that item inventory manipulation is handled
* I don't really think Scene.PacketHandlers.cs should be a permanent home for these handlers - this is just for convenience
* This means that LL RAW terrains (one source being the upload/download buttons on the estate dialog in the viewer) are now imported the 'right' way around rather than being
flipped on the y axis
* Existing RAW terrains before this patch will need to be flipped with the "terrain flip y" command from the console after import
* More details on the mailing lists soon.
-This line, and those below, will be ignored--
M OpenSim/Region/Environment/Modules/World/Terrain/FileLoaders/LLRAW.cs
M OpenSim/Framework/Communications/Cache/CachedUserInfo.cs
M OpenSim/Framework/Communications/Cache/UserProfileCacheService.cs
* Disabled by default (see OpenSim.ini.example for how to enable)
* Saves exceptions to a folder on disk (default "crashes") when enabled.
* These reports can then be uploaded or posted to help debug an error.
* However, this is not currently activated since it's not absolutely fully tested and there's a bug lurking in there to do with the sending of the BulkInventoryUpdate packets
prevent adjacent sims from using identical Local IDs for the attachment
Thanks to Mana Janus (Hippo Viewer) for providing the crucial bit of
information, namely that, due to a bug in the viewer, adjacent sims can't
use the same local ids.
Adds a new method to IClientAPI to allow adding message handlers
for GenericMessages (of which "autopilot" is one). Part 2 adds a
specific autopilot handler in ScenePresence.cs.
2) Removing unused variables and functions.
3) Simplifying the navigation logic in ScenePresence.cs. The
original patch was somewhat complex because it included orientation
logic for a future enhancement of orienting the avatar to point
towards the direction being walked. Currently this isn't working,
though, so I removed the orientation code, which leaves just the
smaller and hopefully simpler-to-understand movement code.
mechanism to prevent prim loss. Preserve link order on sim restart
and drag copy. Fix drag-copied prims' inventories. Fix persistence
of child prim inventories.
* This is Diva's hypergrid patch, as perviously discussed on the opensim-dev mailing list
* Applied some minor prebuild.xml jiggling to resolve a dependency issue
* Thanks Diva!
from the presence module to the message server, through the user server
and on into the database. This should fix the "Already logged in" issue
that grids see after a sim crashes, or a user crashes out of a sim.
Not yet a 100% solution for friends, but getting there.
This patch adds the option of adding the email when you create
a new user. This works in Gridmode as none Gridmode. This
option is also added to RemoteAdminPlugin. With a new handler
you can create a user with a email.
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
the IM module and makes it into a module of it's own, which can be used by
all other modules. Removes some ugly hacks. Refer to the IM module to see
how it's used. Also fixes the persistence issue (Mantis #2598)
Contains a migration. May contain nuts.
Please back up your inventory data store. This revision changes the interface
version!! No older regions can connect to these new UGAIM, and the new regions
can't connect to the old UGAIM. Fixes a long-standing issue of permissions loss
Currently persisted on MySQL only.
physical center of an avatar, for display purposes. This should keep the
avatar feet above ground visually in most cases. Tweaked for both height
extremes and various leg lengths. Improvements welcome
* Code Cleanliness Fixes in LLClientView
* Using field instead of local variable for handlerUpdatePrimGroupRotation (if you notice any new oddities with prim group rotation after this patch, please mantis)
* This is done by sending a 'major interface version' number on sim registration. Developers must increment this every time they make a change that would make the previous
OpenSim revision failure incompatible with the new one (non-fatal incompatibilities are fine).
* This number resides in OpenSim.Framework.Servers.VersionInfo.MajorInterfaceVersion
* This allows the grid service to stop older, incompatible regions from connecting
* Implements the SendInitiateDownload method in IClientAPI
* Uses the ITerrainModule Interface to write a terrain file to disk then uses a FileStream to read the binary file from the disk and put it in a byte array. and save to the xFer list.
* It then tells the client to download the file and the client initiates an Xfer request.
* Items will now be locally cached for only 24 hours from last access. (Rather than until restart)
* Caveat: Implementing the new caching mechanism means statistics gathering on AssetCache is no longer functional. (Justin - you might want to take a look and see if you can somehow get that back and running if you still need it)
* This patch is highly experimental and may cause clients to not be able to connect, if this is the case, it will be rolled back in approximately 5 minutes.
* Introducing IClientCore - this will be the key replacement for IClientAPI in the long run, it has a very minimal set of methods designed to allow you to access specialist API's.
* See https://lists.berlios.de/pipermail/opensim-dev/2008-September/003049.html for the early discussion on this.
This patch introduces a couple of read-only properties,
so that I can grab the asset server plugin from a region
module. This is needed to set up an http service for
accessing standalone assets remotely.
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* This is to make things less confusing to users (and maybe a little easier to do future version filtering for grid connections)
* If there's disagreement about this, then please say so (preferably in the opensim-dev mailing list)
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
* And hopefully rebaking all the time should no longer be necessary now
* It turns out that when the client baked the texture, the uploaded asset had the Temporary flag to true (Temporary is actually deprecated).
* It also had the StoreLocal flag set to true, which signifies that the asset should be stored locally. If it disappears we should reply to the asset request with
ImageNotInDatabasePacket
* However, last time this was enabled some clients started crashing. This may well no longer be the case and needs to be tested, but in the mean time we will store
the asset instead.
* This needs to be resolved in a better way, possibly by starting to send the ImageNotInDatabase packet again instead
* This moves authentication from the client thread (where failure was difficult to detect) to the particular thread handling that packet
* I've kept the authentication outside of the crucial clientCircuits lock (though any delay here is probably swamped by the other delays associated with login)
* Also added more to the unit test to ensure this doesn't regress
KeepAlive for certain XmlRpc handlers.
Making use of new AddXmlRpcHandler method in RemoteAdminPlugin to
avoid clients waiting indefinitely for response.
taking note of BaseHttpServer parameter in CommunicationsManager
constructor (was passed it but then just ignored so far).
* Unix epoch starts at midnight, not at 8:00am
* All date/time handling should be done in UTC in the server, not in
the local timezone.
* Refactor out repeated computation of a constant value
- Added setting of CreationTime to some places where inventoryitems
are created
This fixes Mantis#2390.
Add rezzing time to objects. Add Object return and traffic fields to land
database. Add plumbing for auto return. Implement auto return.
Contains a migration. May contain nuts.
* This allows multiple user profile providers to be specified in OpenSim.ini separated by commas
* If multiple providers are specified then a request for a user profile will query each in turn until the profile is either found or all have been queried
* Unfortunately I don't believe this order can currently be specified, which if true is something that will need to be fixed.
* Thanks to smeans for the original patch.
- Added two missing caps (UpdateScriptAgent, UpdateScriptTask)
- Added one missing EventQueue event (ScriptRunningReply)
- Changed DNE and XEngine to use this new event
As we only use the mono engine anyway, the "Mono" checkbox is set by
default but doesn't have any function.
* I believe this is reasonable since code outside the Linden client stack shouldn't be aware of the packet format being used
* I would love to have made the method protected, but the LoadBalancerPlugin is still calling it and resolving that would require more work
* Region registration is enabled by default in the configuration unless the user chooses otherwise
* On the console
* show status - shows grid status
* enable-reg - enables region registration to the grid
* disable-reg - disables region registration
* Enabling or disabling region registration will not affect any other grid functions or regions already on the grid
* Experimenting with the PacketPool mechanism.
* It's still disabled in the code, however there's now a flag to enable it.
* Converted to use Generic Collections vs Hashtables, also now uses a list of 'OK to pool' packets, starting with the high volume PacketAck packet.
fields is GONE (HttpServer does not support that), you can read the
"normal" HTTP headers available via properties, and you can add
headers. also, it is now possible to set a timeout for KeepAlive (for
those clients that pay attention to it).
this also fixes the broken REST inventory/assets/appearance services,
they should be working again.
testcase for OSHttpResponse will follow.
* I believe this was the cause of the remaining packet_out_of_order messages in the Linden client logs
* There were race conditions where multiple clientstacks would overwrite each other's sequence numbers
Implementation of llModifyLand() and There is a bug on
permission-check of land-terraforming: x an y-coordinates
are interchanged on function-call ExternalChecksCanTerraformLand.
Correct: x is west, and y is north. 2) Missing check of
"Other allow to terraform-flag" (Parcel.ParcelFlags.AllowTerraform)
- Added lookup in the data-layer
- MySQL works
- SQLite doesn't have a grid-db, so it won't work there
- I added MSSQL-code to the best of my knowledge; but I don't know MSSQL :-)
- Added the plumbing up to OGS1GridServices. This speaks with the grid-server
via XMLRPC.
- Modified MapSearchModule to use the new data. It's backward compatible; if
used with an old grid-server, it just returns one found region instead of a
list.
- Refactored a bit.
Note: This updates data, grid-server and region code. No new files.
old way: each region module interested in chat from client had to
- subscribe to scene.EventManager.OnNewClient
- then in its OnNewClient delegate it would subscribe to
client.OnChatFromViewer to capture chat messages coming
new way: ChatModule is the only region module that uses the "old
way" approach but is now forwarding all client chat via
scene.EventManager.OnChatFromClient
- each region module interested in chat from client now only
subscribes to scene.EventManager.OnChatFromClient
this not only simplifies code, but also allows us to substitute
ChatModule with derived classes (ConciergeModule is going to be one
example).
Also, this changeset changes ChatFromViewer to ChatFromClient as it
doesn't necessarily have to be a viewer that is a chat source.
i've taken great care to only comment out those OnNewClient delegates
that were only used for getting at the client chat --- hope it's not
breaking anything.
* Switched it on by default
* Updated OpenSim.ini.example to reflect this
* Caught a UDP Server issue that occurs when the network pipe is saturated
* Still experimental :D
required to log in. set_login_params accepts avatar_uuid and password of a
user with god level 200 or more, and allows setting either or both the
login_motd or login_level
* This is a HUGE update.. and should be considered fraut with peril.
* SSL Mode isn't available *yet* but I'll work on that next.
* DrScofld is still working on a radical new thread pump scheme for this which will be implemented soon.
* This could break the Build! This could break your Grid!
* This is an initial basic experimental code for inventory import and export from the region server
* Probably not yet ready for general use
* Thanks Kayne!
Estate/ Manager Owner Uses the Region/Estate Menu Region TAB,
and uses "Teleport Home All Users..." (Action Button), the
action will complete but no one will be teleported and all
users still function in the region ok.
* returns FAKEEVENT instead of the connection returning a 502. It doesn't like our 502's for some reason.. so, in leau of this.. send it a fake event.
* Once again, this is still 'really early' code, so please don't blame us if you have no more threads left.
* This won't function yet as far as the client can tell.. because it doesn't respond to the first query with a 200 message.
* We have to figure out how to encode those binary values in the example code in the module...
* Committing this so we have a start point. Will continue to work on this more today.
* It seems kind of silly to be building a 256x256 array just to use two 16 float blocks.. but for now the layerdata routine requires it so we'll go along with that.
* We only fill a 32x16 area of the 256x256 float array with data.
* We use patches 0,0 and 0,1 for the first and second patch to determine the direction and magnitude of the wind.
Scene. Make the script engines check that the engine name in the
//Engine:language comment is a valid engine and treat it as a normal
comment if it's not.
//DotNetEngine: needs to be written as //ScriptEngine.DotNetEngine: now, since
that is it's real internal name. //XEngine: still works
Check the client dialog box (from top menu) WORLD / REGION ESTATE
/ REGION tab. The client dialog box seems to have a hard limit of
about 32 characters per line available for displaying the region
version number. Our regions are sending a string which is greater
than the limit, causing the client to wrap the text and look ugly.
* A little wind wouldn't hurt anyone, right? This is the 'slightly breezy' setting.. hopefully you won't notice 'much' of a difference.
* It turns out the terrain patch routine is similar enough to the wind version that it can be used to hack together a breeze generator with a few mods.
* Not much configuration.. yet. You only get breeze updates in the general vicinity of your camera now to keep bandwidth usage down.. and we're not talking about 'much' movement at the moment.
* initial version... could use improvement I'm sure.
Active gestures are sent as part of the login-response. Added
fetchActiveGestures to SQLite and MySQL; added an empty one for MSSQL and
NHibernate. Using the empty ones won't cause errors, but doesn't provide
persistence either, of course.
* There was a small window where region logins were allowed before modules were loaded - avatars logins that hit this window could have caused bad things to happen.
* A similar change will follow for grid mode sometime soon
* Monitors / for getting the seed cap for rez_avatar/request on application/llsd+xml && application/xml+llsd && !application/xml
* Experimental, this might break LibOMV temporarily.
* the methods were identical except that the Properties one did a check for the user profile beforehand. However, every caller was doing this already anyway.
* There are still a lot of things that are hard coded to use http. They need to be fixed.
* Also includes directions
* A standard junk PEM file to append to app_settings/CA.pem in the client so SSL will work
* This patch aims to introduce look at direction persistence between logins. It won't be active until the second part of the patch is committed in about two weeks time. At
this point, region servers that haven't upgraded past this revision may run into problems
* This checkin upgrades the user database. As always, we recommend you have backups in case something goes wrong.
* Many thanks to tyre for this patch.
patch is attached that replaces the o(n^2) algorithm currently
used to build the inventory cache with an o(n) algorithm using
hash tables. the patch also adds some additional error handling.
Floating text, Rotation, Texture animation, Particle System
This will make "Eye Candy" scripts work without modification in
XEngine. The use of the CHANGED_REGION_RESTART hack is no longer
needed. Implemented in MySQL only, hovertext also in SQLite.
* Now it should properly inform the user and stop a login if a region server could not be contacted in order to expect a user (the last commit didn't actually quite work correctly)
* These are different types then the OMV types because changing them causes just about all grid comms to break. If these were the libOMV types, then libOMV couldn't change them ever again after that.. or we'd have a breakage whenever they changed them.
* This might introduce a map issue. Still checking it out.
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
* You can replace "grid" as the asset system with "file" to save and load all your assets from a directory on your hard disk. Files are serialised to XML and saved in the format "/<dir>/0x/0x/0x/0000-0000-000000-0000-0000.xml"
* Directory <dir> is sharing the Asset Server URL path, use a normal path here instead (ie C:\xyz or /var/assets/).
* This probably wont work well in grid mode unless every sim has access to the same directory. This is mostly intended for standalone usage where quick and convenient access to assets is required.
no OpenSim.ini file found by GridInfoService. GridInfoService now will
just issue a warning that GridInfo will NOT be available to your users
if no OpenSim.ini file is available. due to the static nature of
UserConfig (configuration options hardcoded) i don't think it's currently
an option to move GridInfo into user_server.xml but if anyone wants to
look into this i'd be delighted...
* When OGP is active, disable SSL certificate chain validation. I'll add more options here to come, as well as a way to test against a group of known certificate subjects.
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
This small patch provides the required changes to populate
the columns agentIP and agentPort in table "agents"
Tested with mysql (but should work for all supported db engines)
also enable LSLconformance on some texture functions as well.
Applied the part of the patch in Shared/.
The part for Common/ needs to be reworked to remove the reference
into Shared/
It is now possible to use module interfaces without referencing Scene.
Place those interfaces in OpenSim/Region/Interfaces. They may not
use any refs from OpenSim.Region.Environment as parameters.
This resolves a circular library ref introduced in r5949
as those all work with MySQL (and are in fact required it seems);
adds examples as well
- adds region_file_template functionality for the create_region XmlRpc
call of RemoteAdminPlugin
- cleans up and fixes typo in UserProfileData
the first part of gesture persistence.
----------------------------------------------------------
Attachments no longer vanish on walking crossing. Teleport is still
problematic, but will now be blocked with message "Inconsistent
attachment state" rather than losing the attachment. Detach to be
able to TP in that case.
Change user server to handle attachment assets record properly. Ensure
that attachments are not re-rezzed on region crossing. Persistence
will NOT WORK with earliser UGAI!!
Change region server to match.
* The primary immediate use is to provide a means of temporarily reducing log output on the console when executing console commands
* Changing the log level on the console is not permanent and does not affect the log information being put into OpenSim.log
* This could have been done by putting in a threshold level on the Console appeneder in OpenSim.exe.config and implementing config watching in the code.
* But I think that it's a little more user friendly to make this doable via the console.
Places touched:
- Added two events for in-packets to LLCLientView: RegionHandleRequest and
ParcelInfoRequest
- Added sending of two out-packets to LLCLientView: RegionIDAndHandleReply and
ParcelInfoReply.
- Scene handles the RegionHandleRequest, LandManagementModule the
ParcelInfoRequest
- Added inter-region request for LandData by RegionHandle and local position.
This was implemented as XML-RPC request. The returned LandData isn't
complete, it only contains the data necessary for answering the
ParcelInfoRequest
- Added new CAPS (0009) for RemoteParcelRequest and some methods for LandData
handling to LandManagementModule
- Added methods for fake parcelID creation and parsing to Util
- Fixed missing implementation of interface methods.
- Added new file:
OpenSim/Framework/Communications/Capabilities/LLSDRemoteParcelResponse.cs
NOTE: This is part of the patch, too.
Due to the many places touched, I would consider this patch as experimental.
the database is now intepreted as follows: low byte = user flags.
Next byte, low nibble: Deternines the text (Resident, Lifetime, etc)
shown. No customn text support yet.
Binary distributions of OpenSim are not able to get the version info because they lack the ../.svn/entries file. This file exists in the ./bin./svn directory, which would be in a binary distribution. The included patch changes the path from ../.svn/entries to .svn/entries, which allows the version information to be show in "help/about"
* This is being done by preventing close from being called twice on child agent closure (nres which would have been thrown are being swallowed).
* However, it should be possible to do much better cleanup on this code in the future
occasionally, but are fixed on restart (issue 1919).
This patch introduces the following changes:
1. when a user teleports out of Region A, remove that user's profile
from the Region A user profile cache
2. when a user crosses between regions out of Region A, remove that
user's profile from the Region A user profile cache
3. the user profile cache's session ID member can now be set (written),
and is updated each time a connection with a new avatar is established (ie: a
new avatar enters the region)
4. when a region server looks up a user profile and a cache miss
occurs, fetch the user profile from the user server first instead of
immediately returning null
Adds the new access semantics and the new flag (allow only age verified)
Plumbs in the abuse email address from sim to viewer. The other way around,
libomv appears to be lacking support for the data field in the packet.
Includes a migration, run prebuild!
* May resolves inventory problems that occur when the user moves between two regions`
* e.g. if the user moves to a second region, adds an inventory item, moves back to the original region then tries to manipulate that item
* Not yet implemented for teleport
- LLSDLoginMethod should error out in similar way to XMLRPC login for already logged in condition
- Have LLSDLoginMethod mirror the sequence of the XMLRPC for easier side by side compare
- Log messages report which process XML or LLSD generated them for easier debugging
NOTE: this code is work-in-progress, it's not live. it's so far
harmless and just wants to play. it should not bite anyone (yeah,
that's what they all say, i know...)
resending, timeouts, packet discarding. Add notification event for
packet discarding. Add priority scheduling for packet queues.
Add outgoing duplicate detection facility. Correct packet sequencing.
Make provisions for automatic server side throttle adjustments (comes
in next installment)
Add a test event handler (which would fire after a minute if a terrain packet hadn't been acked) to scene to handle the OnUnackedTerrain event, which currently just resends the terrain patch.
The idea of this packet tracking is for the region level application to be able to know if the client stack gave up on sending a packet.
* warning was:
OpenSim/Framework/EstateSettings.cs(277): warning CS0472: The result of comparing `libsecondlife.LLUUID' against null is always `false'. This operation is undocumented and it is temporary supported for compatibility reasons only
* coding style: space before flow control statements please! http://blogs.msdn.com/brada/articles/361363.aspx
Makes the estate dialog fully functional. Implements all client facing functionality. Moves estate data from estate_settings.xml, which is used to provide defaults, to the region data store. Creates one estate for each region, and places the region in it. Converts all region bans to estate bans.
HTTP method matching support. adapting OSHttpXmlRpcHandler
accordingly. dropping OSHttpXmlProcessor delegate in favour of good
old XmlRpcMethodHandler delegate (was the same signature).
* Potentially useful for diagnostics without needing to log in a client
* Packet queue statistics commented out for now pending a better way to cope with the information overload
Patch 7 of the region patches. Finish off the region parts of the estate dialog. Full user functionality. Terrain textures, heights, water, avatar counts, prim bonus, debug settings and region toggles can now be set from the dialog on a per-region basis. Estate stuff defaults to sane values where there are no defaults, to estate_settings.xml otherwise. Sun still b0rked :(
Make all of the toggles go live. Utilizes the new database table for almost everything. Remove lots of now unneeded settings from the EstateSettings class
Patch 5 in the region settings series. Adds a migration to ensure corrupted
data is purged and re-read from defaults. Some changes. Still no full
functionality
Changes the permissions module to make scripts permissive only when intended
Adds security checks to asset transfers to prevent hacked clients fron
requesting script sources.
Adds security checks to llClientView to verify all aspects of ownership
and permissions for inventory based script retrieval.
* This will work as long as those servers are actually registering any threads they use (does not include stuff plucked from the thread pool)
* command is now "show threads" rather than threads
The attached patch tries to read the SVN revision from local file
"svn_revision" before checking "../.svn/entries".
This allows simulators not running from the source tree to properly
display the SVN revision, if the installer generates the
"svn_revision" file.
UserManager.UpdateUserProfile(UserProfileData).
Adding UpdateUserProfile(UserProfileData) to IUserService interface.
Adding RemoteAdminPlugin.XmlRpcUpdateUserAccountMethod(...) to provide
a remote update capability.
* Migration should be automatic on sqlite and mysql
* Migration is not automatic on mssql, you will need to drop the invType column manually
* Migration should be fine, but as for any db change, I would recommend making sure you have backups before moving past this revision
And reverted CachedUserInfo back to revision 5262.
I don't think most of the inventory problems that people are reporting are due to these, but its easier to deal with one set of potential problems at a time, and I'm not going to get any time in the week to work on this anyway.
The Login service should now read/create new inventory on the inventory server that is set in a users profile.
Also added "Add-InventoryHost" console command to add a support for a new server to a region.
So it would be good if someone could test this. Set up the grid as normal, but then also run extra inventory server on a different computer (well actually it just has to be on a different network hostname, so one using "http://localhost:8004" and one using "http://127.0.0.1:8005" should work) then you need to manually edit the user profile database to set the new servers url in a user's "userInventoryURI" field.
Then on a region server, use the Add-InventoryHost to add the new server url (always include the full url, including http, but don't add a final /)
Login with that account and see if the inventory works.
Of course these needs to be made more user friendly.
TODO next is to make the login server read/write a users inventory from the correct server (the inventory url set in a userprofile)
On the region side, although not tested with multiple servers it should work if that inventory url was set, and the inventory servers urls have been added to the CommunicationsManager, using CommunicationsManager.AddInventoryService(string hostUrl)
* commented out [Obsolete(....)] attributes where no replacement feature
was available: if we want to attribute code that we think needs to be
reworked, we should define a new attribute and use that instead
(together with a little tool to retrieve all the attributed code then)
* commenting out unused variables
Currently module loading is done ad-hoc. I propose creating a simple
loader class that leverages Mono.Addins (and perhaps the new .NET
addins when they become available in mono). Attached is a basic
patch for review that compiles into HEAD, but doesn't yet replace
any existing ad-hoc loaders.
Fixes:
- Wearable icon and name sreset to default on copy/paste
- Cache is not updated when renaming/moving folders
- Partial refactor to make inventory less dependen on AssetBase having a "Name" field
- Add llGiveInventoryList() function
Add util functions to compress and uncompress strings.
Fixed a couple of modules so they use SceneCommunicationService rather than directly call functions on the CommsManager.
In function "ReadInExtraParamsBytes", parameter "data" is used without a boundary check.
if data.Length==0, an "out of index" exception will be thrown.
* Enables regular jpeg map images to be served directly from the region.
* EX: http://192.168.1.127:9000/index.php?method=regionImagecc4583cd269b41bfa525dd198e19a5c5
* This is actually HTTP server address + port + index.php?method=regionImage<REGIONUUID, no dashes>
* The Webmap image location gets printed on the console when the simulator starts up.
* JPEG data is cached so we only create the webjpeg once.
* This currently has various bugs which are more to do with the way its been hacked together than the feature itself (e.g. on save-oar, ghost prims will appear of the saved
contained items). These will be found and eliminated in subsequent patches.
* Not yet ready for use
* Only generates a new maptile after a refresh interval
* Maptile names have the UnixTimeSinceEpoch that they were generated and the regionUUID they're from, so you can know which ones are no longer necessary.
* Updates RegionInfo, so backup your /bin/Region/*.xml files.
* Implemented a hack so regions beyond the 10,000m range will show the map without having to click on the map before they'll start to show. The hack shows regions around the one you're in, but it won't show the one you're in.. you still need to click on the map to get that (not sure why yet). Additionally, the map still only shows pictures for regions that are hosted on the same instance (no change).
* Please feel free to comment if the periodic logging is causing you problems in some way - I'm loathe to add yet another switch to OpenSim.ini but will if it proves necessary
* This is the GC.GetTotalMemory() method, which I'm guessing does not include memory used by the VM (hence the memory usage reported in top on linux would be much higher)
* Unfortunately, there's some kludges with the Async manager and the llDetected functions that I have yet to decipher... so llDetected functions don't work with collision events at the moment....
having reached the intermediate level of .NET's XmlSudoku, i've
now figured out how to do deserialization using different
XmlSerializers (this stuff begins to grow on me, sigh).
[still not used code, work-in-progress]
* adding convenience property on OSHttpRequest.cs (from awebb)
having spent the last couple of days wrestling with .NET XmlSerializer
and trying to get it to do what is required by XMPP (RFC 3920 & 3921)
this is the preliminary result of that wrestling (you should see the
other guy!): XmppSerializer allows us to serialize Xmpp stanza (and
theoretically deserialize [or reify] them), XmppWriter helps avoiding
various gratuitous crap added in by off-the-shelf XmlSerializer.
this is currently not used anywhere but the plan is to use it for
at least an XMPPBridgeModule.
* You'll need to start-up the MessageingServer and set it up. It sets up like any of the other grid servers.
* All user presence data is kept in memory for speed, while the agent is online. That means if you shutdown the messaging server or the messaging server crashes, it forgets who's online/offline.
* Occasionally the region-cache will get stale if regions move around a lot. if it gets stale, run clear-cache on the messaging server console to clear the region cache.
* User tries to log-in but is already logged in. Userserver will send message to simulator user was in to log the user out there.
* From the UserServer, admin types 'logoff-user firstname lastname message'.
* Some regions may not get the message because they're not updated yet.
* Looks up UUIDNames for script time and colliders in a separate thread.
* Hopefully this'll allow you to look at top scripts on a region that has a lot of scripts without crashing your client thread.
llLoopSound sends out one packet to clients in view, so it doesn't work anymore
when clients enter later on, or the prim is modified in any way.
Solution: Stored sound data on prim, send full update instead.
llStartSound and llLoopSound now accept both LLUUIDs to a sound as well as object
inventory sound names. llStopSound clears prim data and sends full update.
If a request is made for an asset which is not in the cache yet,
but has already been requested by something else, queue up the
callbacks on that requester instead of swamping the asset server
with multiple requests for the same asset.
There's some oddness with the parcel counts, but if you can get past the oddness, you can return objects under an owner that you have permission to return.
Nothing huge, but the new button code for producing
a new script does well, but the script will not allow
for name change once created. It reverts back to new script.
i've added the OSHttpStatusCodes enumeration of HTTP status codes, have adapted
BaseHttpServer to use those.
then RestPlugin now has proper Failure handling returning proper HTTP status
codes. Regions/POSTHandler is work-in-progress.
* If a caller attempts to set PrimitiveBaseShape.ProfileCurve with a HollowShape or ProfileShape component which is not a valid enum, a warning is spat out and a default shape
subtituted
* This does not solve any underlying problem if we're missing some enum values (though it's not obvious what these are), but it should allow save-xml2/load-xml2 to be used
without causing invalid enum value related exceptions. The checks will also guard against badly behaved clients.
* This change alters the order of shape values in the xml, since it appears properties are serialized after fields (at least this is the case in mono). .net native
deserialization can cope with this it appears, though people manipulating xml manually may need to adapt (if there are any).
* This may be a good argument against relying on .net [de]serialization for our xml format.
provide OSHttpRequest and OSHttpResponse to our REST handler.
also, this adds proper RestPlugin.IsGod() checking against the X-OpenSim-Godkey
HTTP request header.
last, i added XML doc comments to RestPlugin.cs
the "if (request.UserAgent != null)" branch in the wrong place: as a result BaseHttpServer would not do
anything if the user agent header field was present....ARGH! BAAAAAAD.
You sure can. This change set restores pants (and the rest of the
default appearance) in grid mode. The
root issue had to do with serializing multi-faced textures to the
grid server. This also restores the lookup path through the avatar
factory module, as that seems the reasonable place to have it live.
Some clean up patches are coming later as well, plus testing on
standalone, but this should be in a good kicking around state for
grid users.
Fixes a bug in BaseRequestHandler.
If the length of the patter is equal to, or greater than, the length of
the actual request path, then an exception is thrown. System using is
added to support use of String.Empty. Exception is used to ensure most
efficient operation on (assumed to be most common) successful case.
This patch adds an additional handler to the existing BaseHttpServer.
It does not affect any of the existing behaviors except insofar as the
new handler may be selected.
It is selected first because its Agent-oriented nature means that it
should not be pre-empted. The new handler type is defined by IHttpAgentHandler
in Framework/Servers and has two interface methods: Match and Handle.
The Match function returns a boolean result based upon examination of
information presented in the User-Agent header.
The Handle function expects to get the request and response instances
associated with the flow. The handler is responsible for ALL activity
associated with the request except in the event of an unhandled exception,
in which case the HandleAgentRequest routine will generate a 500 status
message and close the stream.
There are two immediateley apparent (and VERY easy to implement)
improvements that could be made:
1. The Match call could be allowed to operate over the entire
request context., rather than just agent identity.
2. The Handler could return a boolean indication of whether or not
the request was actually handled, and if not, the remaining handler
mechanism could take a shot at it. This would eliminate issues
arising from pre-empted streams.
enhancing IStreamHandler and IStreamedHandler interfaces so that OSHttp{Request,Response} get passed in,
allowing RestHandlers to set response status code, redirections, etc.
* In theory, this should be a somewhat useless statistic since the user server will already have tried to use the inventory service to retrieve the avatar's skeleton. If this
fails, login is halted completely.
* Nonetheless I'm recording it anyway just to see whether it happens (yes, I'm too lazy to scan the logs...)
the attached patch set adds the (still work-in-progress but already
working) RestPlugin base class and the RestRegionPlugin code. we are using
XML serialization.
currently working:
GET /admin/regions/ -> returns UUID list of known regions
GET /admin/regions/<UUID> -> returns detailed region information
we'll be adding support for POST/DELETE/PUT and also for
/admin/regions/<UUID>/name etc.
* If the status cannot be retrieved, then the region startup will terminate.
* The aim of this is for earlier detection of situations where the region can send messages out but cannot accept incoming requests (often due to firewall issues)
* This is currently an extremely simplistic check which completely trusts whatever http uri is given by the region
* This contact may be problematic, though since the user service needs to be able to contact the region http uri, it doesn't seem unreasonable for the grid to have to be able to do so too at this stage
* This change will require a prebuild
* This is not functional anywhere, but is a incomplete proposed replacement class for IClientAPI. Assistance filling this out would be appreciated. Use IClientAPI.cs as a reference, but make sure not to copy it - instead rewrite and abstract.
This patch just tightens up console handling in BasOpenSimServer
and removes (or redirects) a couple of messages that were being issued
using Console.Writeline.
* Added back a sleep to the kick routine so users get a 'you have been logged off message' when they get kicked from the simulator for various reasons (like 'the simulator is going down')
* Linden client 1.19.1.4 appears to be happy using UDP for this request again, and Linden's own servers (1.21) don't appear to be supplying the CAPS version currently
* This should for now fix the bug where texture selection in the edit window both shows only already open textures, and later stops subsequent inventory requests from working.
The attached patch moves the sun module incrementally nearer where it
needs to be. Default behavior, i.e. no overriding configuration is to
match Second Life's diurnal/nocturnal rhythm.
All designated values are now sent to the client.There remain a couple
of unanswered questions about how this SHOULD be implemented though.
* Moved script errors to the debug channel.
* Typing '/2147483647 OK' results in a debug_channel message.
* Expanded the available parameters that are send-able through IClientAPI
lbsa71