f130e1a86f
Add threads to the watchdog thread list before we start them.
...
Hopefully this wil make "WATCHDOG: Asked to update thread ## which is not being monitored" messages." go away.
2011-11-12 00:24:45 +00:00
25c32061e4
Make log messages on authentication failure more explicit
2011-11-11 23:45:08 +00:00
6adaf1be74
extract common ScenePresence setup code into Init() method for ScenePresenceSitTests
2011-11-11 23:36:35 +00:00
84ad23234b
add SP.PhysicsActor checks to other sit/stand tests
2011-11-11 23:33:55 +00:00
acaf6937c5
add sit and stand on ground test
2011-11-11 23:32:43 +00:00
a3052e40ad
extract ground sit code into SP.HandleAgentSitOnGround() for consistency with other sitting code.
2011-11-11 23:28:32 +00:00
6ce3daff94
Pick up the intended ConsolePrompt from [Startup] instead of console_prompt.
...
Addresses http://opensimulator.org/mantis/view.php?id=5786
2011-11-11 23:15:53 +00:00
2a2cdaa211
As with prim sitting avatars, make an avatar phantom when it sits on the ground and solid again when it stands.
...
This is to avoid http://opensimulator.org/mantis/view.php?id=5783 when a collision with a ground sitting avatar causes that avatar to automatically stand and sometimes not be able to move
A better solution may be to keep gound sitting avatars solid but remove their collision status. However, this requires some physics code work.
2011-11-11 23:10:43 +00:00
ce8441132e
Restore sending of OutPacket() for object kills removed in commit c7dd7b1.
...
OutPacket() must be called within the m_killRecord lock. Otherwise the following event sequence is possible
1) LLClientView.ProcessEntityUpdates() passes the kill record check for a particular part suspends before OutPacket()
2) Another thread calls LLClientView.SendKillObject() to delete the same part and modifies the kill record
3) The same thread places the kill packet on the Task queue.
4) The earlier thread resumes and places the update packet on the Task queue after the kill packet.
This results in a ghost part in the sim that only goes away after client relog.
This commit also removes the unnecessary m_entityUpdates.SyncRoot locking in SendKillObject.
2011-11-11 22:37:57 +00:00
2a7f4e0602
remove unncessary IClientAPI parameter from SP.SendSitResponse()
2011-11-11 21:53:00 +00:00
b1cb4f5b04
As per mailing list last week, remove facility that would automatically move the avatar if prim with no sit target was out of sitting range.
...
Now, no movement occurs.
Note that you can still sit on a prim with an explicit sit target from any distance, as was the case before.
2011-11-11 21:42:58 +00:00
a658bddbcd
Bump warp sit distance up to 10 meters, as discussed on opensim-dev mailing list last week.
...
This means that if the avatar is within 10 meters of the selected target, it sits on it immediately without walking.
Existing autopilot outside this range will be disabled in a later commit
2011-11-11 19:59:12 +00:00
8f4955f6a9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-11 19:40:31 +00:00
dc200d7bb5
Add new ScenePresenceSitTests with a single sit/stand test
2011-11-11 19:38:36 +00:00
10e664eedc
Fix compile error from an earlier commit
2011-11-10 17:37:33 -08:00
7432ca6daf
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 17:21:49 -08:00
96c59156a7
In SOP, replaced many references to private members with the public properties
2011-11-10 17:21:37 -08:00
a5838cf0a6
Prevent linking objects while they are deeded. On unlinking deeded objects,
...
set LastOwnerID properly so the parts cannot be transferred, circumventing
no trans perms
2011-11-11 00:28:12 +00:00
2bd4eaeb19
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-10 23:43:29 +00:00
0daece6f2b
Fix turn left and turn right properly. Works for both built-ins and LSL AOs
2011-11-10 23:42:48 +00:00
8fbaa10ade
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 15:23:16 -08:00
9359293b11
Cleaned UpdatePermissions calls on SOP and SOG to eliminate redundant properties packet sends and so one part is not telling a different part what to do. That should be up to the SOG to manage permissions on its parts and notify clients when one of them changes.
2011-11-10 15:20:21 -08:00
f5abae5ac6
Implement nudging support for strafing motion
2011-11-10 23:03:05 +00:00
c0d280d948
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-10 22:58:24 +00:00
2d4ac6288d
Alter commit 3758306 to allow region name to be substituted within a region console prompt
...
This is to allow broader subsitution in the future. Currently, the only substitions are \R (for region name) and \\ (for a single backslash)
e.g. "Region (\R) " is the current and continuing default prompt
This renames custom_prompt in [Startup] to ConsolePrompt
2011-11-10 22:56:13 +00:00
f3fea81936
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-10 14:09:53 -08:00
18c625bda6
When updating SOG, a physics taint should not override a full update with a terse update
2011-11-10 14:09:35 -08:00
b990914ec4
convert tabs from commit 3758306 to spaces
2011-11-10 21:04:12 +00:00
444b345cdf
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-10 20:54:44 +00:00
48d2300b8a
Fix misaligned sit animation on scripted sit caused by the default sit
...
animation being run after the scripted one.
2011-11-10 20:54:15 +00:00
9cba179dff
launch pCampbot shutdown console comand asynchronously
2011-11-10 20:03:36 +00:00
f31a58bd99
Remove unused index parameter from BotManager.startupBot(). Rename startupBot() => StartBot()
2011-11-10 19:40:45 +00:00
37583063ee
Allow custom setting for the console prompt
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-11-10 06:56:32 -05:00
4f6915bad5
minor: Correct misleading method doc on SOG.UpdateRootRotation()
2011-11-09 21:49:08 +00:00
bbab7b6b4d
Use IsConnected status to determine whether all pCampBots have disconnected, rather than maintaining a separate count
...
Checking IsConnected is more reliable.
2011-11-09 21:23:23 +00:00
674b521fdd
In pCampBot, don't try and pull down Primitive faces or sculpts set to null
2011-11-09 20:21:48 +00:00
7e488cd635
Remove unused avariable in PollServiceRequestManager
2011-11-07 23:24:13 +00:00
39b967e214
Correct test failure in sit position check of TestSitAndStandWithNoTarget()
...
Curiously, a Vector3.ToString() will not display the last two places of the float. In this case, the failure of
the assertion would confusingly report Expected: <0, 0, 0.8454993> But was: <0, 0, 0.8454993> when actual Z figure is 0.845499337
Should fully address http://opensimulator.org/mantis/view.php?id=5779
2011-11-07 22:53:52 +00:00
6d92d65140
That such a trivial change can be so difficult to get right. Fix it this time.
2011-11-07 02:40:35 +00:00
e775b3fc47
Fix build break
2011-11-07 02:03:17 +00:00
67780b00f0
Fix up failing test to compensate for changed sit target offset
2011-11-06 21:47:12 +00:00
559e6e52f5
Make the AsyncSceneObjectDeleter send a list of kills. This will make large
...
marquee-selected deletions of single prims or small link sets nearly
instantaneous
2011-11-06 20:43:49 +00:00
c7dd7b13a2
Convert SendKillObject to take a list of uint rather than sending one
...
packet per prim. More to come as we change to make use of this.
2011-11-06 20:38:07 +00:00
fa992a020c
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-06 20:00:47 +00:00
0bf757e42b
Allow HG and other scene presences not linked to a user account to function.
2011-11-06 20:00:03 +00:00
927561383e
HUD attachments: Removes some more messages sent to wrong clients.
2011-11-06 17:43:39 +01:00
dfbfc9826a
Damaged assets, especially appearance textures, could crash the region server with a fatal exception.
...
Now, such excpetions are caught by an exception handler and just an error message is shown.
This was the kind of exception causing these fatal server crashes:
APPLICATION EXCEPTION DETECTED: System.UnhandledExceptionEventArgs^M
^M
Exception: System.ArgumentOutOfRangeException: Argument is out of range.
Parameter name: offset exceeds the size of buffer
at System.Net.Sockets.NetworkStream.BeginRead (System.Byte[] buffer, Int32 offset, Int32 size, System.AsyncCallback callback, System.Object state) [0x00000] in <filename unknown>:0
at HttpServer.HttpClientContext.OnReceive (IAsyncResult ar) [0x00000] in <filename unknown>:0 ^M
^M
Application is terminating: True^M
2011-11-06 15:05:19 +01:00
bd10d14bbd
Fix build break
2011-11-05 23:12:00 +00:00
bbbcdaa462
Remove spammy autopilot debug
2011-11-05 22:54:47 +00:00
01b6a4b62e
Remove some left over debug and reverse experimental reordering of ifs
2011-11-05 22:46:45 +00:00
4d3926694d
Remove enableprejump config option and associated code as this is now
...
fully functional and cannot be disabled because that would break timings.
2011-11-05 22:43:45 +00:00
71388fc02a
Porting the ScenePresenceAnimator from Avination. Jump and fall anims now work
...
properly.
2011-11-05 22:41:00 +00:00
ac3254a5f5
Change puvlic m_ variable to a getter property
2011-11-05 21:43:35 +00:00
2dc452b4a7
ScenePresence part of the Avination animator fixes.
2011-11-05 21:41:16 +00:00
b6df9e9fe4
Chnaging the sit target adjustment to a more precise approximation of SL. Some small
...
fixes ported from Avination. Some white space fixes.
2011-11-05 21:24:36 +00:00
e182cc198d
Fix avatar height, removes the hip offset hack
...
Author: Mana Janus <mana@mjm-labs.com>
2011-11-05 02:56:52 -07:00
4797ed6edd
Multiple lines in welcome message use '\n' in the welcome message to
...
start a new line.
2011-11-05 02:42:21 -07:00
e3885625a0
Don't rotate child prims, if only the root prim is rotated.
2011-11-05 02:26:25 -07:00
cfce2529ad
refactor: In sit code, compare against Vector3.Zero and Quaternion.Identity instead of individual components of a vector/quat
2011-11-05 02:04:48 +00:00
8105794121
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-05 01:42:20 +00:00
28c4dc9be4
Fix NPC sitting for prims without a sit target.
...
This is to partially address http://opensimulator.org/mantis/view.php?id=5769
We don't need to call SP.HandleAgentSit() again if we are within 10m since the autopilot won't trigger.
By calling it twice, the position of the sitting NPC was wrongly adjusted, ending up near <0,0,0>.
However, this change does mean that NPCs further than 10m away will not attempt to autopilot to the prim, though this code was broken anyway (is actually a different mechanism to normal NPC movmeent).
Hopefully this can be addressed soon.
2011-11-05 01:38:42 +00:00
b199aad037
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-05 00:11:10 +00:00
c803ed28c3
Replacing te linking code with the code from Avination. Link sets prims are now
...
numbered properly even when sets are linked to sets.
2011-11-05 00:09:37 +00:00
f7b8c54c24
Add comment for experimental effect of removing the Thread.Sleep(20) in ODEPrim.changevelocity()
2011-11-04 23:43:17 +00:00
d7815ace4a
On standup, trigger the changed link script event after the avatar has been fully changed.
...
This was meant to help with the script in http://opensimulator.org/mantis/view.php?id=5772 but it doesn't work.
Probably the event is fired before the physics actor has been set up again for the stood avatar.
Fixing that would be much more complicated, but processing the event last of all seems like a good idea in any case.
2011-11-04 23:24:22 +00:00
ccca6ba935
Stop llPushObject() from causing problems by adding force via a taint rather than directly.
...
This isn't a perfect solution since there can be a race between the taint processing and taint setting, as force needs to be reset after processing.
Needs careful locking in the future.
2011-11-04 23:12:01 +00:00
b8d50b10fb
Rename ForEachAvatar back to ForEachScenePresence. The other changes
...
from previous commit which sort out which iterator is used are left
intact. A discussion is needed as to what constitutes an avatar vs a
ScenePresence.
2011-11-03 17:53:51 -07:00
94dc7d07eb
Renamed ForEachRootScenePresence to ForEachAvatar. Cleaned up calls to
...
the 3 iteration functions so more of them are using the correct
iteration for the action they are performing. The 3 iterators that seem
to fit all actions within OpenSim at this time are:
ForEachAvatar: Perform an action on all avatars (root presences)
ForEachClient: Perform an action on all clients (root or child clients)
ForEachRootClient: Perform an action on all clients that have an avatar
There are still a dozen places or so calling the old
ForEachScenePresence that will take a little more refactoring to
eliminate.
2011-11-03 17:06:08 -07:00
69a4057135
remove the pointless check of the face texture struct against null in Bot.Objects_NewPrim()
2011-11-03 22:52:14 +00:00
e4bdf1e78f
actually remove the sleep from PhysicsBehaviour that I shifted to Bot a couple of commits ago
2011-11-03 22:50:40 +00:00
f26fdbd8da
Rename PhysicsBot => Bot since it doesn't just exercise physics anymore
2011-11-03 22:39:06 +00:00
ca2c25ece2
Move one of the old physics sleeps out into the main bot loop, so leaving out PhysicsBehaviour doesn't result in continuous other behaviours
2011-11-03 22:35:21 +00:00
5a67940acc
Add click/grab behaviour to pCampbot, which gets bots to randomly click things.
...
This can be specified on pCampbot.exe by using g in the list of behaviours for the new -behaviours,-b switch
e.g. -b p,g to get both existing physics and grabbing behaviours.
grabbing is primitive, it attempts grabs on random prims whether they're actually signalled as clickable or not.
behaviour is currently primitive overall, behaviours are just executed in a list
2011-11-03 22:31:31 +00:00
3ea379e4cd
Move PhysicsBehaviour into a spearate behaviours folder
2011-11-03 21:25:27 +00:00
66c60c56a0
Separate out physics testing actions into a separate PhysicsBehaviour class
2011-11-03 21:16:24 +00:00
a62ccb5c4c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-03 20:12:10 +00:00
40a1eddfd1
Drop the CopyTo parameter from Int32.MaxValue to 4096. This is a buffer size
...
not a target size. Mono 2.10 appears to try to allocate the full buffer which
immediately crashes. Tested on mono 2.6.7 and 2.10.5
2011-11-02 18:55:54 -07:00
6b4ae4f30c
Revert "fix CopyTo call that was breaking under mono 2.10"
...
This reverts commit d30971fdc2
2011-11-03 00:23:32 +00:00
99a347ee11
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-02 17:11:10 -07:00
d30971fdc2
fix CopyTo call that was breaking under mono 2.10
2011-11-02 17:10:59 -07:00
e746840226
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-11-02 23:51:48 +00:00
08fcf958c2
Port the Avination offline messaging system to Core
2011-11-02 23:50:47 +00:00
a724ebacd7
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-11-02 14:59:34 -07:00
e2c51a977d
Changes UpdateFlag in SOP to an enumeration of NONE, TERSE and FULL.
...
UpdateFlag is now referenced/used only within SOP and SOG. Outsiders are
using ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule on
SOP consistently now. Also started working toward eliminating those
calls to ScheduleFullUpdate, ScheduleTerseUpdate or ClearUpdateSchedule
from outside SOP in favor of just setting properties on SOP and let SOP
decide if an update should be scheduled. This consolidates the update
policy within SOP and the client rather than everywhere that makes
changes to SOP. Some places forget to call update while others call it
multiple times, "just to be sure".
UpdateFlag and Schedule*Update will both be made private shortly.
UpdateFlag is intended to be transient and internal to SOP so it has
been removed from XML serializer for SOPs.
2011-11-02 14:59:00 -07:00
59232a6ea8
Change default say distance to 20m from 30m, the same as on the big grid. This is to improve the migration of scripts that expect a 20m say distance.
...
If you want to keep a 30m say distance then please set this as the say_distance parameter in the [Chat] section of OpenSim.ini.
2011-11-02 20:05:31 +00:00
72923134e9
Get some hopefully more useful exception information when OpenJPEG.EncodeFromImage() fails in VectorRender and DynamicTexture modules
2011-11-02 18:40:49 +00:00
03993d0b14
Fix race condition that would sometimes send or save appearance for the wrong avatar.
...
In AvatarFactoryModule.HandleAppearanceUpdateTimer(), we loop through appearance save and send requests and dispatch via a FireAndForget thread.
If there was more than one request in the save or send queue, then this led to a subtle race condition where the foreach loop would load in the next KeyValuePair before the thread was dispatched.
This gave the thread the wrong avatar ID, leaving some avatar appearance cloudy since appearance data was never sent.
This change loads the fields into local references so that this doesn't happen.
2011-11-02 18:25:03 +00:00
b6873a7b5d
Catch any exceptions exiting the top of the robust console, as we already do for the main simulator.
...
This prevents issues such as transient mono console problems from crashing the server.
2011-11-02 13:16:02 +00:00
c5fb39e21f
Restore the recursive calling of PRIM_LINK_TARGET because the version I made
...
breaks LINK_SET et al.
2011-11-02 12:09:18 +00:00
1b9ae3fb51
Some positioning fixes from AVN trunk
2011-11-02 12:02:44 +00:00
b9e700b60d
Streamline PRIM_LINK_TARGET, eliminating a recursion and a failure scenario
2011-11-02 11:43:16 +00:00
7c8bfac11b
Removed redundant SceneContents property from Scene. It's the same as SceneGraph property.
2011-11-01 17:20:12 -07:00
3bead3eb50
Part 2 of see_into_this_sim_from_neighbor configuration option removal
2011-11-01 17:11:43 -07:00
4b58d4ff95
Removed see_into_this_sim_from_neighbor configuration option.
2011-11-01 16:51:14 -07:00
9456a540c5
Add "appearance send" command to allow manual sending of appearance.
2011-11-01 23:23:45 +00:00
8e2e4c47d9
Add "show status" command to pCambot
2011-11-01 22:09:21 +00:00
40750b44a0
Listen only for non SimShutdown Network.Disconnect firing so that we don't quite the program before all bots have actually logged off.
2011-11-01 21:47:14 +00:00
53f3b76a84
get rid of unused m_verbose field
2011-11-01 21:18:28 +00:00
12bd0ebd34
stop recording the threads on which we happen to start bots. These are pointless since they terminate quickly
2011-11-01 21:15:47 +00:00
9ef5107157
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-11-01 21:02:03 +00:00
87ec8a4ecb
Retain a reference to an action thread rather than starting an infinite loop via a timer, so that we can actually abort the action thread on shutdown
2011-11-01 18:36:29 +00:00
9d214d4903
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-10-31 16:42:50 -07:00
3c55f3015f
Removed unused show commands from Scene.cs and SceneBase.cs. The show modules command in OpenSim.cs now shows both shared modules and region modules.
2011-10-31 16:42:28 -07:00
b951c7fb1e
Make bots share a cache so that asset downloads attempts are only made once instead of once for each bot
2011-10-31 23:22:55 +00:00
210868a832
Remove OpenSim.TestSuite
...
Hasn't been touched since 2009 and wasn't more than another copy of pCampBot
2011-10-31 23:10:10 +00:00
d366a08ebb
Stop individual bots attempting to download the same asset more than once
2011-10-31 22:52:49 +00:00
0c6509098a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-31 22:27:35 +00:00
43e07efbc8
Fix bot disconnection
2011-10-31 22:27:12 +00:00
3a2dcc7298
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-10-31 15:21:39 -07:00
d3153f47fa
Adding green dots to map response should be for root agents only
2011-10-31 15:20:57 -07:00
b1647f6d04
adjust pCampbot so it starts up bots with the name format "<firstname> <lastname>_<bot-number>"
...
e.g. starting up two bots called "Ima Bot" will give them the names "Ima Bot_0" and "Ima Bot_1"
This is necessary since bots with random names can no longer be created, as there's no easy way to turn off account authentication
2011-10-31 22:14:49 +00:00
e3f51df3c2
Stop pCampbot from firing connected event twice, which results in double counting.
2011-10-31 21:33:25 +00:00
a9a24062a5
Plug a security hole in the inventory service
2011-10-31 11:11:36 +00:00
14646f2524
Fix line endings
2011-10-30 23:43:17 -07:00
a85ff884d9
Experimental reorder of Heartbeat loop now simulates physics and sends updates to clients prior to sleep. Existing behavior was to sleep BEFORE sending updates. We found this patch reduced latency to clients by 1-2 heartbeat periods.
2011-10-30 23:39:39 -07:00
6d97545b6b
Remove the SyncRoot locking from Scene which was only being done around the main physics loop and ScenePresence position and velocity setting
...
This is no longer necessary with ODECharacter taints (ODEPrim was already not taking part in this). BSCharacter was already tainting.
2011-10-29 02:42:53 +01:00
9fdd1753fa
Add taint target velocity for ODECharacters as is already done for ODECharacter position and position and velocity for ODEPrims.
...
This is to help stop surprises if the velocity is set in the middle of physics calculations, though this probably isn't a huge problem.
It's more for consistency and for the next step of removing some scene locks
2011-10-29 02:30:33 +01:00
ef8370fb8e
tidy up OdeCharacter so that we just use OpenMetaverse.Vector3 assignment directly where possible, instead of transferring X, Y and Z components separately
...
some of this is probably a hold over from using ODE.Vector3, which is still necessary in some places.
2011-10-29 02:07:28 +01:00
a5ea9f8830
Move position set from taint to logically better position at top of ODECharacter.ProcessTaints() though this makes no practical difference
2011-10-29 01:46:22 +01:00
5ae8de3c00
Stop setting _position as well as m_taint_position in ODECharacter.Position
...
setting position at the same time as taint appears to undermine the whole purpose of taint
testing doesn't reveal any obvious regressions in doing this
2011-10-29 01:39:48 +01:00
61e97ee4c8
Remove completely unused SOG.Rotation parameter
...
We always use SOP.Rotation instead
2011-10-29 00:39:01 +01:00
c2da1c4580
set grp.RootPart.GroupPosition for code consistency (and readability) rather than calling SOP.OffsetForNewRegion
2011-10-28 23:43:31 +01:00
9bf8c3e7b7
Add missing doc to rotation/position methods in SOG
2011-10-28 23:38:57 +01:00
0fe756e42c
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-28 23:16:46 +01:00
7b46506822
fetch SOP.RotationOffset once in UpdateRotation() and compare rather than fetch four separate times.
...
No functional change.
2011-10-28 23:15:51 +01:00
272bf71279
Removed use of 'is' operator and casting to find the root ScenePresence in MessageTransfer modules and Groups module.
2011-10-27 02:26:37 -07:00
06577d7299
Continuation of previous checkin. Found more places where ForEachScenePresence can be changed to ForEachRootScenePresence.
2011-10-27 01:25:12 -07:00
b98613091c
Added new ForEachRootScenePresence to Scene since almost every delegate passed to ForEachScenePresence checks for !IsChildAgent first. It consolidates child and root handling for coming refactors.
2011-10-27 00:42:21 -07:00
40bee97015
For now, comment out error message on new script engine console commands.
...
This causes false positives if a simulator has more than 1 region and the current region is 'root' since this sends the command separately to each region and each region has its own XEngine
2011-10-27 03:01:27 +01:00
76c50d23f2
Comment out inventory folder bulk update code on InventoryAccepted message introduced in commit db91044 on Aug 22 2011
...
This should be unecessary since the folder update is already made at the time of the offer (and moved to trash if not accepted).
This code was also not taking into account the situation where an item was accepted.
Needs more fixing if this results in an aggression elsewhere.
2011-10-27 02:56:08 +01:00
e210d95821
Don't blow our brains out if LLClientView.BulkInventoryUpdate() is wrongly passed a null node reference.
...
Addresses worst aspect of http://opensimulator.org/mantis/view.php?id=5752
2011-10-27 02:50:58 +01:00
2db6a8ce8f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-27 02:06:59 +01:00
820242bc49
Fix a bug I introduced yesterday in ODE physics where prim scripts would only receive the very first collision.
2011-10-27 02:05:59 +01:00
41395d5443
Added optional owner classes to existing OSSL agent Permissions
...
PARCEL_GROUP, PARCEL_OWNER, ESTATE_MANAGER and REGION_OWNER can be combined with the existing agent uuid option to limit ossl functions to agents and owner classes.
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 10:35:50 -04:00
9a28e7a4e0
Implementation of PRIM_OMEGA, but only for setting
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 08:41:07 -04:00
059f4b6a3a
Implementing PRIM_LINK_TARGET, but only for setting params
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-10-26 07:47:44 -04:00
c275c22928
Restart the event queue worker threads that I accidentally disabled earlier today in 8a0a78c.
...
Also adds these to the watchdogs with very large timeouts (should really be infinite)
2011-10-25 23:26:21 +01:00
182908d216
In Watchdog, add ability to specific timeout for a thread.
...
This also changes the point of registration to the StartThread() call rather than the first Update()
2011-10-25 23:16:01 +01:00
e549f2f443
Add m_threads dictionary locking to Watchdog.GetThreads()
2011-10-25 22:51:23 +01:00
6a74a4c12b
Clear OdeCharacter CollisionEventUpdate when we subscribe or unsubscribe from collision events
2011-10-25 22:46:42 +01:00
0f83f87233
Remove unused fields from CollisionEventUpdate
2011-10-25 22:39:08 +01:00
c825c9a945
Get rid of the pointless null checks on collision listeners. Add warning about synchronicity for PhysicsActor.OnCollisionUpdate event doc
2011-10-25 22:35:00 +01:00
b9f106f484
When sending object collision updates, don't null out and recreate the CollisionEventUpdate() if the number of collisions falls to zero. Reuse the existing one instead.
2011-10-25 22:28:40 +01:00
5d37f0471e
For ScenePresence collision events, instead of creating a new CollisionEventsThisFrame every time we need to send some new ones, reuse the existing one instead.
...
This assumes that the listener is using the data synchronously, which is currently the case.
2011-10-25 22:19:17 +01:00
7b6b36cee9
Fix bug where collision event listeners were not removed once the listener had gone away.
...
This was causing continuous use of temporary memory even when all avatars had left the scene.
Memory does leak but it does cause more calls to the garbage collector, which would pause the scene thread for a very short while during collection.
2011-10-25 21:40:51 +01:00
1fbb379536
minor: rename a parameter in OdeScene.Simulate() from actor -> prim since it's an OdePrim
2011-10-25 21:15:37 +01:00
a4d4f54848
minor: add "threads show" as synonym for "show threads" for consistency
2011-10-25 20:59:27 +01:00
968cae6c17
Add "threads abort <thread-id>" simulator console command that allows us to abort a watchdog managed thread.
...
This is for diagnostic purposes.
2011-10-25 20:49:46 +01:00
8a0a78cbcc
Make OpenSim.Framework.Servers.HttpServer rely on OpenSim.Framework instead of the other way around.
...
This is necessary so that code in HttpServer can use framework facilities such as the thread watchdog for monitoring purposes.
Doing this shuffle meant that MainServer was moved into OpenSim/Framework/Servers
Also had to make OpenSim.Framework.Console rely on OpenSim.Framework rather than the other way around since it in turn relies on HttpServer
MainConsole and some new interfaces had to be moved into OpenSim/Framework to allow this. This can be reverted if parts of OpenSim.Framework stop relying on console presence (cheifly RegionInfo)
2011-10-25 20:24:21 +01:00
e14cb45b9b
Drop some unnecessary ContainsKey() checking before Remove() in BaseHttpServer()
...
Remove() presumably does this check anyway since it just returns false if the key is not in the collection.
2011-10-24 23:26:41 +01:00
9ec672c70b
Fix bugs in EventQueueGetModule.ClientClosed() and BaseHttpServer.RemovePollServerHTTPHandler() that stopped existing code in ClientClosed() from actually tearing down the poll handler
...
Actually doing the tear down appear to have no ill effects with region crossing and teleport.
2011-10-24 23:16:03 +01:00
79d5bc9beb
separate out future common setup code from EventQueueTests.AddForClient()
2011-10-24 22:29:13 +01:00
e28e2d24c7
Add new EventQueueTests with basic test to check that adding a client registers an http poll
2011-10-24 22:23:41 +01:00
4c9400e646
Add optional getauthinfo and setauthinfo authentication service calls.
...
These are disabled by default, as before. Please only turn these on in secure grids, since they allow the same facilities as the existing SetPassword call (also disabled by default)
These facilities can be helpful when integrating external systems, in addition to the existing option of adapting an IAuthenticationService or using WebLoginKey
2011-10-24 21:40:36 +01:00
b868328d51
Comment out the uuid gatherer lines that I accidentally left in.
2011-10-23 03:14:32 +01:00
c2272a755f
Fix missing Busy-Mode Response
...
http://opensimulator.org/mantis/view.php?id=5748
2011-10-22 13:17:07 -04:00
3fc47275cf
Add case to Lightshare/Windlight
...
Thanks thomax for a patch to add handling for Sun/Moon pos.
2011-10-22 13:06:34 -04:00
ffdf59a57c
Get UUIDGatherer to scan notecards in the graph for asset uuids.
...
This is to support npc baked texture saving in oars and iars.
May address http://opensimulator.org/mantis/view.php?id=5743
2011-10-22 02:16:46 +01:00
30320505fa
redirect UserInventoryHelpers to use a different CreateNotecardAsset() so we can comment out some inconsistency
2011-10-22 00:58:56 +01:00
bc2da4eaad
correct misleading method doc on CreateNotecardAsset()
2011-10-22 00:55:50 +01:00
c4f8da7359
in AssetHelpers, store the actual text passed in to the method, not the string "data"
2011-10-22 00:45:47 +01:00
5d7eaedbeb
encode notecard assets in proper format for tests, rather than just using whatever string is given
2011-10-22 00:21:45 +01:00
9b3bbedeea
refactor: rename some AssetHelpers.CreateAsset() methods to CreateNotecardAsset()
2011-10-22 00:13:46 +01:00
a1f05a289d
RemoteAdmin - Added optional terrain loading on region create using parameter heightmap_file to specify the terrain file to be loaded
2011-10-21 23:12:01 +01:00
4241ee5dfa
very minor removal of old commented out line of code in OdeScene
2011-10-21 00:04:36 +01:00
30fe66d3ab
remove unnecessary null check on _collisionEventPrim
2011-10-20 20:58:29 +01:00
9c43020876
Get OdeScene to use passed in time step rather than hard-coded 0.089
...
However, I still don't recommend changing MinFrameTime from 0.089, high values do not work well and lower values don't seem to make much difference
2011-10-20 20:48:51 +01:00
6837e44d07
Pass PhysicsScene.Simulate() only the MinFrameTime rather than the useless Math.Max(SinceLastFrame.TotalSeconds, MinFrameTime)
...
SinceLastFrame was calculating the interval between any sleep that had occurred to pad out the frame time and the start of the next frame.
This would usually be below MinFrameTime but occasionally if the sleep was long it would be above, often due to the time required to update the watchdog.
This doesn't appear to play much practical role right now.
ODE was actually ignoring it entirely. Bullet might be helped slightly by receiving a non-varying value.
2011-10-20 19:44:59 +01:00
b63ec987b0
For now, stop passing timeStep into methods where it's not actually used.
2011-10-20 17:54:32 +01:00
f16d125027
Change wording on asset requests.
...
Not all 'notified missing' assets are a problem. Some are invalid references which happen to be buried in other text.
2011-10-19 23:56:17 +01:00
9ab2943abf
Removed redundant NotInTransit function from ScenePresence. IsInTransit=false does the same thing and NotInTransit was not used anywhere.
2011-10-19 15:50:09 -07:00
eac29396d9
Moved HaveNeighbor utility function from ScenePresence to Scene. Fixed line endings from previous commit.
2011-10-19 15:38:25 -07:00
8b20faf06c
Merge branch 'master' of git://opensimulator.org/git/opensim
2011-10-19 14:43:16 -07:00
da794f34a5
Renamed and rearranged AvatarFactoryModule to eliminate redundant lookups of scene presence by client ID.
2011-10-19 14:41:44 -07:00
601dabb1b7
Extend scripts stop/start/suspend/resume console commands to allow action on a single script by giving the script item id (which can be found via scripts show).
...
Not an ideal way to do this on a region with many scripts. Needs refinement later.
2011-10-19 22:30:31 +01:00
32c3faedd6
Add "scripts stop" and "scripts start" console commands.
...
These will stop all running scripts and start all stopped scripts respectively.
A stopped script does not save any events for later processing.
2011-10-19 21:40:28 +01:00
f836710af5
minor: improve command help on scripts suspend/resume
2011-10-19 21:34:55 +01:00
5607fd3af8
Fix resume scripts.
...
On resume, we need to place requeue the script for event processing if there are any events on the queue.
Also need to do this under m_Script lock in order to avoid a race
2011-10-19 21:30:37 +01:00
3cf7fb4eca
Add "scripts suspend" and "scripts resume" commands.
...
These aim currently to suspend and resume all scripts.
However, resume isn't currently working due to what looks like a bug in resume functionality itself.
2011-10-19 20:53:24 +01:00
b45219065c
on log and "show scripts" messages, show script item UUID rather than asset UUID
...
The item ID is the one required for any script manipulation on the command line, so I think it's somewhat more useful to show this bearing in mind the limited space available
2011-10-19 20:26:05 +01:00
116fbe8258
add current script status to "scripts show" command (running, suspended, etc.)
2011-10-19 20:24:07 +01:00
ecad9f9fd5
Add "show scripts" command to show all scripts currently known to the script engine in the current region.
...
Also added synonym of "scripts show"
2011-10-19 20:09:02 +01:00
d9184eceab
Add option to allow remote http calls to setpassword in the AuthenticationService.
...
This is switched on by setting AllowSetPassword = true in the [AuthenticationService] section of Robust.ini or Robust.HG.ini
Default is false as before.
2011-10-19 19:03:17 +01:00
fe484ab331
Slightly change log message in LoadRegionsPlugin
2011-10-19 01:22:07 +01:00
178b8d0926
Region-UUID - can not be zero-uuid
...
http://opensimulator.org/mantis/view.php?id=3426
2011-10-19 01:19:21 +01:00
4cffdf15ba
Make ScopeID optional for http GetAccount and GetAccounts
...
If not specified then it assumes UUID.Zero. as occurs elsewhere in the codebase
2011-10-19 00:34:54 +01:00
9f171041c9
Make PrincipalID a synonym for UserID in GetUserAccount
2011-10-19 00:23:06 +01:00
97c66f8eac
Get new NewUser and SetUserAccount calls to accept PrincipalID instead of UserID for consistency with output
2011-10-19 00:16:53 +01:00
9d59b285bb
Allow an http call to set account details if AllowSetAccount = true in [UserAccountService].
...
As before, default is false to not allow these calls.
2011-10-19 00:06:40 +01:00
c85a780583
Provide an option to allow remote calls to the CreateUser method on the UserAccountService
...
Default is false, as before.
Enabling AllowCreateUser in [UserAccountService] for ROBUST allows avatars to be created via an http call, with viewer 2 appropriate bits and pieces.
Only Ruths can be created at present.
Please don't rely on the config since at some point CreateUser will be moved to a separate co-ordinating service.
2011-10-18 22:51:40 +01:00
581885da75
Temporarily put in log lines to record time taken to set terrain in OdeScene.
2011-10-18 21:21:15 +01:00
03202ada29
Store scene identifier passed in to OdeScene for later debug messages
2011-10-18 21:11:13 +01:00
1d4cd76e8a
Don't bother taking OdeLock during OdeScene construction, since there can be no contention until the object is constructed.
2011-10-18 21:03:41 +01:00
f10a824e47
Remove unnecessary lock of OdeLock in OdePrim.changeadd()
...
This taint can only ever be processed from the OdeScene.Simulate() loop, which already locks OdeLock.
2011-10-18 20:58:59 +01:00
5515c45e3b
minor: method doc to explain a lock of OdeLock
2011-10-18 20:56:11 +01:00
71d221cdc0
Remove the unused CollisionLocker from ODE
...
Despite its name, this wasn't actually being used in any collision checking
2011-10-18 17:35:58 +01:00
aeb4ff0274
Allow an avatar to be explicitly named to the "debug packet" command
2011-10-17 20:58:23 +01:00
120114e96b
refactor: Make IClientAPI.DebugPacketFormat a property rather than a setter without a getter
2011-10-17 20:50:29 +01:00
96ff2c63ed
Add avatar names to debug packet output
2011-10-17 20:37:01 +01:00
62a63f834b
refactor: Use SOP.SitTargetAvatar instead of calling a special GetAvatarOnSitTarget() which returned exactly the same thing
2011-10-17 02:04:20 +01:00
79c13cd997
rename OS_NPC_SIT_IMMEDIATE to OS_NPC_SIT_NOW since it's shorter and more understandable
...
This makes something like osNpcSit(npc, llGetKey(), OS_NPC_IMMEDIATE) now become
osNpcSit(npc, llGetKey(), OS_NPC_SIT_NOW);
This is why it's in development :)
2011-10-17 01:57:23 +01:00
de161585c0
Implement osNpcStand(<npc-id>)
...
Allows you to stand an NPC that has sat.
2011-10-17 01:56:25 +01:00
ddcb88ff53
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-17 01:45:41 +01:00
0c041ce12f
Implement osNpcSit(). This is still in development so don't trust it
...
Format is osNpcSit(<npc-uuid>, <target-uuid>, OS_NPC_SIT_IMMEDIATE)
e.g. osNpcSit(npc, llGetKey(), OS_NPC_SIT_IMMEDIATE);
At the moment, sit only succeeds if the part has a sit target set.
NPC immediately sits on the target even if miles away - they do not walk up to it.
This method is in development - it may change so please don't trust it yet.
Standing will follow shortly since that's kind of important once you're sitting :)
2011-10-17 01:42:31 +01:00
730460169f
Bug fix on the bug fix on UserAccountService.cs
2011-10-16 16:13:24 -07:00
bbd0e68c06
Guard HGAssetService against uninitialized variables and null arguments.
2011-10-15 20:23:26 -07:00
b9930a6305
improve method doc on Scene.OtherRegionUp()
...
this is really just to trigger panda.
2011-10-15 03:17:58 +01:00
ddf54b5537
move see_into_this_sim_from_neighbor [Startup] flag parsing into Scene with the others
2011-10-15 03:03:05 +01:00
528cc8136e
fetch physical_prim switch from [Startup] config from inside scene, as is done for most other scene config params
2011-10-15 02:54:43 +01:00
5ddefc2564
remove now redundant m_physical_prim flag from SOP.ApplyPhysics()
2011-10-15 02:47:27 +01:00
3843efe478
Restore [Startup] physical_prim flag which can stop any prims being subject to physics
...
This had stopped working. However, at the moment it still allows the physics flag to be set even though this has no effect. This needs to be fixed.
Default for this flag is true as previously.
2011-10-15 02:42:43 +01:00
f2889d7ce9
remove redundant PhysActor.IsPhysical call from SOP.UpdatePrimFlags() as its done immediately afterwards in DoPhysicsPropertyUpdate()
2011-10-15 02:12:46 +01:00
732e937379
refactor: Remove redundant code in SOP.UpdatePrimFlags()
2011-10-15 02:07:05 +01:00
c93c9ea072
factor common code out into SOP.RemoveFromPhysics()
2011-10-15 02:02:39 +01:00
978fb3d482
reduce access to ODECharacter methods to make code analysis easier. Eliminate redundant argument on ProcessTaints()
2011-10-15 01:41:39 +01:00
9cc2694776
restrict unnecessary access levels on ODEPrim fields/properties
2011-10-15 01:31:09 +01:00
f2132329a3
refactor: make methods that do not need to be public in ODE private or internal to aid code reading/analysis. Remove some unused method arguments
2011-10-15 01:20:40 +01:00
4bfc2f5cde
Change hardcoded ODE total frame time to match the default total frame time (0.09375 -> 0.089).
...
No apparant ill effects - because the default stepsize is 0.2, there are still 5 physics steps per physics frame.
This is a precursor to using the elapsed value passed in (and now changeable in config).
2011-10-14 21:07:57 +01:00
83c7b9b609
Bug fix -- Test User on first run standalone might not be created properly: let all instances of UserAccountService have all its service references properly initialized, and register console commands on only one.
2011-10-13 18:03:19 -07:00
aa19ccf65c
refactor: rename IClientAPI.SendPrimUpdate() to SendEntityUpdate() since it sends entity updates (including presence ones), not just prims.
2011-10-14 01:45:46 +01:00
77c65951e0
Extract NullPhysicsScene from PhysicsScene to improve code readability
2011-10-14 01:38:14 +01:00
ee84c0589c
Don't execute rest of code in XEngine.RemoveRegion() and Close() if the module is disabled.
2011-10-14 01:06:43 +01:00
4e7d4330c2
Expose minimum frame time and update periods for experimentation.
...
Settings are at bottom of [Startup] in OpenSimDefaults.ini, override in OpenSim.ini to change
Defaults are the same as previously.
More information to come on opensim-dev shortly.
Feel free to tweak but if you do please don't expect any support unless feedback on certain tweaks is explicitly requested.
2011-10-13 23:47:37 +01:00
128d8dfd8b
refactor: Put the frame update period when temporary objects are cleaned up in a field, like all the other update periods
2011-10-13 22:28:42 +01:00
fd274a6688
refactor: chain the two scene constructors together to eliminate more copypasta
2011-10-13 22:21:03 +01:00
a6fa15e8b6
Tie reported FPS correction factor into the minimum frame time rather than setting separately.
...
This makes reported FPS scale as required if min frame time changes
2011-10-13 22:07:55 +01:00
ceb326284e
Move fps stat adjustment factor into field rather than hard-coded.
2011-10-13 21:55:51 +01:00
20da04fd0c
More method doc and formatting changes. Makes DestroyOdeStructures() private
2011-10-13 21:42:24 +01:00
227db07f2f
refactor: move 3x copy/pasted ode structure removal code in ODECharacter into a DestroyOdeStructures() method
...
also adds some method doc
2011-10-13 18:19:13 +01:00
f08664f422
remove some mono compiler warnings
2011-10-12 21:54:25 +01:00
631d5e16ef
Get rid of some traces of the old pre-ROBUST grid architecture config
2011-10-12 21:51:34 +01:00
f5f7ca47ea
Bring LindenUDP.Tests back from the dead. No tests are running.
...
Code drift means that most of this stuff doesn't compile but the structure is still useful.
2011-10-12 21:31:22 +01:00
ea7366ddc6
When shutting down XEngine, log how many scripts are being shutdown so the user knows why they are waiting.
2011-10-12 19:42:04 +01:00
c5826d589a
minor: insert some commented out log lines which are a blunt but useful instrument to see packet expiry and received acks
2011-10-12 19:35:40 +01:00
36e73dbc9b
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-12 19:24:03 +01:00
f9ffd2538f
Improve some method doc for LLUDPClient, LLUDPServer and UnackedPacketCollection
2011-10-12 19:22:30 +01:00
4b7b9e81f7
Make it possible to disable the HG linker. On non-HG systems it spits yellow
...
spam, so it should not load unless HG is desired.
2011-10-12 15:41:59 +01:00
ca74088d94
Change default groups messaging module in hardcode to the empty string.
...
Modules should not assume thet they are the one and only, but only be
enabled when explicitly configured.
2011-10-12 09:21:46 +01:00
fe3594c5ea
Start recording object updates per second statistic (analogue of agent updates per secod) and expose via monitoring module as ObjectUpdatePerSecondMonitor
...
A useful diagnostic to find out how object updates are burdening a scene
2011-10-11 22:17:05 +01:00
f138a2056e
meaningless change to goose panda
2011-10-11 00:29:41 +01:00
28f549bd64
osSetParcelDetails - PARCEL_DETAILS_CLAIMDATE
...
this new flag set parcels claim date
value 0 for this flag set current unixstamp
http://opensimulator.org/mantis/view.php?id=5725
2011-10-11 00:13:26 +01:00
353e7ce873
Allow monitoring of stats by region name
2011-10-10 23:58:27 +01:00
62aad4c18f
Add other region stats (total frame time, physics fps, etc.) currently missing from MonitorModule
...
Unlike the other 3 stats mechanisms, monitor data can be queried per individual region, which makes this useful.
This doesn't affect an of the existing monitored stats.
2011-10-10 23:48:53 +01:00
19096bd391
Convert getLastReportedSimFPS() and getLastReportedSimStats() into more idiomatic LastReportedSimFPS and LastReportedSimStats on SimStatsReporter
2011-10-10 22:23:42 +01:00
8114f895c2
Provide a way to turn the MonitorModule on and off
...
Default is currently on since this is the historical setting
2011-10-10 22:17:29 +01:00
2b290793ab
refactor: have lsl and ossl interrogate scene.StatsReporter directly rather than going through scene
...
I know this goes against the law of demeter but I don't think it's that useful here and I'd rather get rid of nasty little wrapper methods
2011-10-10 21:54:08 +01:00
013bf2775f
remove unused LastAssetID from DynamicTextureUpdaer
2011-10-10 15:19:23 +01:00
156385f48b
Tweak to language of last commit in rejecting UUID.Zero in GridService.RegisterRegion()
...
Allowing regions with UUID.Zero causes problems elsewhere according to http://opensimulator.org/mantis/view.php?id=3426
It's probably a bad idea to allow these in any case.
2011-10-08 02:15:04 +01:00
a6c5e00c45
GridService - Region UUID can not be NULL
...
http://opensimulator.org/mantis/view.php?id=3426
2011-10-08 02:13:18 +01:00
29660fe175
Remove the inconsistently applied now pointless FailIfRemoteAdminDisabled() check on XMLRPC RemoteAdmin handlers.
...
If admin is disabled then the XMLRPC handlers are never registered, which means that they cannot be called anyway.
2011-10-08 02:00:36 +01:00
71d29decc8
replace List used by m_accessIP in RemoteAdminPlugin with the more efficient HashSet
2011-10-08 01:53:10 +01:00
4073cd6ced
Add option to allow only explicitly listed IPs to access RemoteAdmin facilities.
...
Also adds password check to some functions where this was missing and fixes some parameter checking.
This is a patch from http://opensimulator.org/mantis/view.php?id=5715 with a few small unrelated spacing tweaks from me.
Thanks Michelle Argus.
2011-10-08 01:23:26 +01:00
ff80113534
Go back to lying that sim fps is 55 when it's actually locked at a maximum of 11.
...
We're been lying since 2008 so I'm sure another few years can't hurt.
To know the real fps, either divide sim fps by 5 and/or look at the frame time.
2011-10-08 00:15:15 +01:00
f8c06c6114
flip master version up to 0.7.3
2011-10-07 23:41:55 +01:00
1c54817977
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-07 16:36:43 -04:00
a9b3ab0c85
Add note to docs
...
This method is used by externasl/3rd party management tools to
create users and they depend on us to generate the UUID.
2011-10-07 16:34:33 -04:00
e3c522e211
Comment out [SCENE PRESENCE] SendAppearanceToAllOtherAgents: log message
...
As per earlier discussions with dslake
2011-10-07 20:51:26 +01:00
4b46b7a5ad
Fixed line endings from previous commit
2011-10-06 23:20:51 -07:00
f26a966b8e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-06 22:50:03 -07:00
4748c19bdb
Refactored "known child region" in ScenePresence. There were 4 different
...
ways to access the list/dictionary of child regions and locking was
inconsistent. There are now public properties which enforce locks.
Callers are no longer required to create new copies of lists.
2011-10-06 22:47:33 -07:00
1f78dc6504
remove the pointless slashes on the end of the (5!) different server stat retrieval mechanisms.
...
Original request URLs that end with / will still work, but this will allow one to type /simstatus as well as /simstatus/
Can't do this with webstats yet since it does insane things to the path.
2011-10-07 00:30:35 +01:00
4c812884be
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-06 23:47:41 +01:00
95910f03d4
WebStats - Home Link Fix
...
http://opensimulator.org/mantis/view.php?id=4536
2011-10-06 22:30:24 +01:00
9a16e76f51
Simplified IsInTransit property on ScenePresence and removed InTransit() which called IsInTransit=true which called m_inTransit=true. Also removed NotInTransit().
2011-10-06 12:39:19 -07:00
08f264d096
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
...
Conflicts:
OpenSim/Region/Framework/Scenes/ScenePresence.cs
2011-10-06 12:22:15 -07:00
bd9ba904c3
Refactor ScenePresence so gets and sets are through properties. Added private sets when needed. Removed redundant code when methods replicated what the set already does
2011-10-06 12:19:31 -07:00
77b8fb0f86
Added back UserAccount that creates random UUID for new account.
...
This should fix recent issues with 3rd party apps that use the
old interface w/o breaking the new one.
2011-10-05 22:01:12 -04:00
ca83f99332
Instead of adding stat agentMS in all kinds of places, calculate it instead in the main Scene.Update() loop, like the other stats
...
Some of the places where agentMS was added were in separate threads launched by the update loop. I don't believe this is correct, since such threads are no longer contributing to frame time.
Some of the places were also driven by client input rather than the scene loop. I don't believe it's appropriate to add this kind of stuff to scene loop stats.
These changes hopefully have the nice affect of making the broken out frame stats actually add up to the total frame time
2011-10-06 00:45:25 +01:00
7fa1c979cf
rename WebStatsModules.m_scene to m_scenes since it's a list of scenes, not a single one
2011-10-05 23:36:27 +01:00
8a8983b3d4
Add user ID to new estate user prompt, to make it clearer and consistent with the main create user prompts
2011-10-05 23:34:18 +01:00
604708fc96
Change WebStatsModule to check its config properly, instead of catching the ineviable NullReferenceException!
...
Also, tidy up spacing.
2011-10-05 23:31:53 +01:00
9090039324
Remove unused local variable i from OdeScene.Simulate()
2011-10-05 22:15:28 +01:00
7d033187d8
Make reported sim fps more accurate, in line with frame time ms
...
Also remove some unused fields and improve naming on others.
2011-10-05 22:08:56 +01:00
3142982353
Removed redundant scene presence lookups in HGMessageTransferModule
2011-10-05 12:58:24 -07:00
38d205502a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-04 16:59:35 -07:00
146322eb34
Removed redundant IClientAPI calls from TreePopulatorModule. Removing tree objects already triggers objectkill packet to client. No need to send again.
2011-10-04 16:59:05 -07:00
9a49b3b519
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-04 23:53:30 +01:00
b907a66f39
When creating a new user on the comand line, give the option of allowing a UUID to be specified to override the randomly generated one.
...
This can be useful in some migration cases where recreating user accounts with known IDs will preserve region scene object ownership.
2011-10-04 23:48:35 +01:00
413e299045
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-04 15:44:22 -07:00
b229a72a5f
Turn off keepalives when commands are specified
2011-10-04 15:43:41 -07:00
92c88121c7
Removed all refs to IClientAPI from IAttachmentsModule. Separated client handlers for attachments to call public interface and rearranged module file into sections
2011-10-04 14:40:39 -07:00
bfa405e6f7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-03 16:45:04 -07:00
460946ad62
Removed redundant code in AttachmentsModule and simplified interfaces which converted back and forth between ScenePresence and IClientAPI. More to be done still.
2011-10-03 16:44:32 -07:00
c7d0d71666
trival tweak to trigger the continuous integration system
2011-10-04 00:37:02 +01:00
b98442dcec
Animation-States Turning Left, Turning Right implemented/enabled
...
http://opensimulator.org/mantis/view.php?id=3036
2011-10-04 00:27:11 +01:00
a8af0a5ba8
Return NULL_KEY from llGetTexture if a non-existent face is indicated, rather than ""
...
As per http://wiki.secondlife.com/wiki/LlGetTexture
2011-10-04 00:15:48 +01:00
8a6e6866d9
For llGetTexture(), if the face texture asset is in the inventory, return the inventory name rather than the asset UUID
...
This is as per http://wiki.secondlife.com/wiki/LlGetTexture
Applied patch in http://opensimulator.org/mantis/view.php?id=4552 with an additional break statement if an inventory item is found to exit early.
Thanks Michelle Argus!
2011-10-04 00:07:52 +01:00
34026887fe
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-10-03 23:26:52 +01:00
37ae6451f9
Remove vestigal RegionStatus.SlaveScene.
...
This appears to be code clutter since the code that uses this has long gone.
2011-10-03 23:25:09 +01:00
e77c919290
Remove usage of Linden packet types from inside Attachments Module and interface
2011-10-03 11:55:54 -07:00
56dbab35e1
Remove unimplementated UpdateMovement() methods from SOG, SOP.
...
SP still has an implementation but this is now just a public method on SP rather than an abstract one in EntityBase.
No point making the code more complex until it actually needs to be,
2011-10-01 01:26:50 +01:00
42fe774ad1
Remove OpenSim.Region.Examples.SimpleModule
...
This module is more than 2 years old and at least some of the 'example' code it gives is now misleading.
Even the logs say it say some bits were broken where it was put in!
2011-10-01 01:21:20 +01:00
c7db3df344
llGetLinkKey, llGetLinkName Fix for sitting Avatar
...
when an avatar sits on a prim, we get now his key & name ;-)
http://opensimulator.org/mantis/view.php?id=4476
2011-10-01 00:41:47 +01:00
a1875ec760
Add ability to pass in the permissions option (perm) to save oar via RemoteAdmin
...
Applies patch in http://opensimulator.org/mantis/view.php?id=5686
Thanks Michelle Argus!
2011-10-01 00:19:09 +01:00
246443773a
minor: remove clutter null check from pass in config to AvatarFactoryModule.Initialize()
...
This is never null
2011-10-01 00:15:30 +01:00
e742cffe15
Add Enabled switch in new [Attachments] section in OpenSimDefaults.ini to allow attachments to be temporarily turned off.
...
This is for debugging purposes. Defaults to Attachments Enabled
2011-09-30 01:19:22 +01:00
528fcede6c
llAvatarOnLinkSitTarget Implementation
...
http://wiki.secondlife.com/wiki/LlAvatarOnLinkSitTarget
2011-09-29 01:08:05 +01:00
a3531dec1a
Add en_US culture setting to the async delete to inventory thread, to avoid any issues with float serialization with machines set to non en_US locales.
...
Doing this to see if addresses inventory object deserialization problems in http://opensimulator.org/mantis/view.php?id=5708 , though if it does I'm really surprised not to have seen it before now.
Really need to go through and systematically set the culture for every timer and change all BeginInvoke calls to FireAndForget instead.
But don't want to do something like that this close to a release.
2011-09-26 23:00:16 +01:00
2b2580e3a1
Fix for rezzing and derezzing HUDs (see Mantis #5406 ). From now on updates are only sent to affected clients.
2011-09-25 00:51:43 +02:00
8caf3ed49e
Remove the unimplented "clear assets" command.
...
This was a bizarre relic of a bygone age that had no implementations.
If you're using and want to clear the flotsam asset cache then please use the existing "fcache clear" command
2011-09-24 02:22:47 +01:00
e789ab659c
Removed uncalled region load method.
...
The method LoadRegionsPlugin.LoadRegionFromConfig was no longer being referenced from anywhere, so I removed it. It's function has apparently been taken on by the PostInitialise of that module.
2011-09-24 02:06:34 +01:00
39d7945efc
Added a setting to [Startup] section of config that will allow the simulator to start up with no regions configured.
...
I added the boolean config setting "allow_regionless", defaulting to false. If set to true, opensim will start up ok if no region configurations are found in the specified region_info_source. It will not ask the user to create a region.
2011-09-24 01:59:02 +01:00
c14c4bc1ec
Don't try and resolve user account for authorization if the agent has come in via hypergrid.
...
If a user account isn't available, this just passes on the name given by the agent instead.
I'm not sure this is particularly useful since I believe that agent names could be faked in this context - it might be no more useful than a viewer agent string.
In fact, there might even be an argument that passing on this name provides a false expectation of authenticity. However, I will apply for now.
Patch applied from http://opensimulator.org/mantis/view.php?id=5696
Thanks Michelle Argus.
2011-09-24 01:39:37 +01:00
839c1cdcc4
Improve locking when access queue in EventQueueGetModule
2011-09-24 01:10:23 +01:00
bec0cbe82b
remove unused SOP.Create() method
2011-09-23 22:20:15 +01:00
c8304b7f84
Fix avatar parameter updating for viewer 3 and maybe 2.
...
When a slider parameter is changed, the viewer uploads a new shape (or other asset) and the item is updated to point to it.
Viewer 1 uploaded the data in the initial request itself, so the asset references was almost always correctly updated.
However, viewer 3/2 always uploads data in a subsequent xfer, which exposed a race condition where the viewer would make the item update before the asset had uploaded.
This commit shuffles the order of operations to avoid this race, the item is updated with the new asset id instead of the old one while the upload was still taking place.
A second race had to be fixed where avatar appearance would also be updated with the old asset id rather than the new one.
This was fixed by updating the avatar appearance ids when the appearance was actually saved, rather than when the wearables update was made.
2011-09-23 02:59:33 +01:00
41616cad09
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-22 01:11:19 +01:00
3ccb58c05c
Fix failure to teleport when an agent is lured on the same sim (and probably in neighbouring sims) with HG lure active
...
It turns out that the HG lure module was setting up a pending lure when it intercepted the instant message on its way out to the target avatar.
However, an IM would only be sent if the user was remote, so it would not be set up for users on the same sim or in an immediate neighbour.
We fix this by adding the pending lure when the message goes out and ignoring a duplicate pending lure add if it goes to out via IM.
Hopefully addresses http://opensimulator.org/mantis/view.php?id=5690
2011-09-22 01:08:38 +01:00
28a482a7ee
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-21 16:24:48 -07:00
2c0bb8118d
Commented out new debug statements in ScenePresence
2011-09-21 16:24:19 -07:00
d358125cac
Reinstate option to land an npc when it reaches a target.
...
This is moved into ScenePresence for now as a general facility
2011-09-22 00:16:05 +01:00
241e07d006
Move code which handles NPC movement into Scene so that this can also be used by Autopilot coming from the client side.
...
I thought that I had implemented this but must have accidentally removed it.
Adds a regression test to detect if this happens again.
Temporarily disables automatic landing of NPC at a target. Will be fixed presently.
2011-09-21 23:56:11 +01:00
f9438e7147
Remove unused and never set SP.PreviousRotation
2011-09-21 22:01:57 +01:00
572b680cb0
get rid of an incredibly noisy logging message from the last commit
2011-09-21 20:15:06 +01:00
c9c40343af
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-21 20:05:11 +01:00
8159fd7110
When calling osNpcMoveTo(), rotate the avatar in the direction of travel.
...
This stops the npc walking backwards if the target is directly behind.
This means that the npc no longer returns to its original rotation once movement has finished.
If you want this behaviour, please store and reset the original rotation after movement.
This is somewhat to address http://opensimulator.org/mantis/view.php?id=5678
2011-09-21 19:28:41 +01:00
7ec7a3cf33
Null simulation data must return a non-null region settings or other parts of the simulator expect
2011-09-20 15:35:36 -07:00
7829b7a601
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-20 14:07:41 -07:00
fa9291512a
Make debug statements in ScenePresence consistent and add a few more
2011-09-20 14:07:10 -07:00
aadf7dd91c
Remove vestigal OpenSim.Data mono addins extension points that don't look like they've been active for at least 2 and a half years
2011-09-20 20:56:32 +01:00
1e798136c3
adjust some whitespace to trigger another build, to check the last failure was just a glitch
2011-09-17 01:33:55 +01:00
f950338124
Remove old bullet DotNET and X libraries in preparation for BulletS
...
These weren't working properly anyway.
You will need to rerun prebuild.sh/.bat after this commit, and maybe "nant clean" as well.
2011-09-17 01:09:25 +01:00
385c4a210d
On setting a new avatar appearance, if height hasn't changed then don't set that same height in ScenePresence.
...
This prevents unnecessary work in the ODE module, though possibly that should be checking against same size sets itself
2011-09-17 00:26:53 +01:00
6f542f73d4
Stop the avatar stalling on its first boarder cross when using the ODE plugin
...
When upgrading the previously child agent to a root, the code was setting the Size parameter on the ODECharacter PhysicsActor.
This in turn reset Velocity, which cause the border stall.
I'm fixing this by commenting out the Velocity = Vector3.Zero lines since they don't appear to play a useful purpose
2011-09-16 23:57:16 +01:00
adfe713b43
minor: I was wrong about OffsetPosition - sometimes it genuinely does return offset position!
...
Add method doc to explain this.
2011-09-16 22:55:24 +01:00
b2356340d2
Remove setter from SP.OffsetPosition, since all sets should flow through SP.AbsolutePosition
...
OffsetPosition is also misnamed - it returns the absolute position and never contains an offset.
2011-09-16 22:51:36 +01:00
c695e23dd9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-16 21:06:09 +01:00
903d5c02cb
Updated some variables to be closer to the coding standards (and easier to understand).
...
There were a few variables in LocalConsole with single character names, and the class fields did not use the m_ prefix.
I also removed a redundant variable, h. It was being set to 1 in a couple of places, and incremented in another, but never actually used.
2011-09-16 20:24:47 +01:00
30b6838837
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-09-16 19:56:14 +01:00
a00327d0e5
Fix build errors on Windows by adding missing OpenSim.Services.Base reference
2011-09-16 19:54:23 +01:00
923f2459cf
Passwords could be revealed in console by pressing backspace.
...
Pressing backspace causes hidden input (such as passwords) to be revealed on the console. The echo state was not being taken into account when handling a backspace key press.
2011-09-16 19:25:38 +01:00
d4043c084a
MSSQL Bug fix in user account retrieval, plus migrations for FriendsStore and InventoryStore
2011-09-16 19:09:46 +01:00
1458fab82c
Reattaching a region was failing if the estate name had not changed (issue 5035).
...
Using the RemoteAdmin API to close then recreate a region would fail if the estate name had not changed. If the estate name /was/ changed then the existing estate would be renamed rather than a new one being created. The problem really arose from a lack of distinction in the data storage layer between creating new estates and loading existing ones.
2011-09-16 18:50:25 +01:00
9046651583
Pass any region scope through to the CreateUser() method
2011-09-16 00:36:43 +01:00
4ae4b14b5d
refactor: move estate owner setup code into separate method
2011-09-16 00:24:23 +01:00
522d6261f1
Correctly create a freshly created estate owner's default items and avatar entries on standalone if applicable.
2011-09-16 00:12:12 +01:00
c4efb97d49
Write code to create minimum necessary body parts/clothing and avatar entries to make a newly created user appear as a non-cloud on viewer 2
...
Viewer 2 no longer contains the default avatar assets (i.e. "Ruth") that would appear if the user had insufficient body part/clothing entries.
Instead, avatars always appear as a cloud, which is a very bad experience for out-of-the-box OpenSim.
Default is currently off. My intention is to switch it on for standalone shortly.
This is not particularly flexible as "Ruth" is hardcoded, but this can change in the future, in co-ordination with the existing RemoteAdmin capabilities.
Need to fix creation of suitable entries for users created as estate owners on standalone.
Avatars still appear with spooky empty eyes, need to see if we can address this.
This commit adds a "Default Iris" to the library (thanks to Eirynne Sieyes from http://opensimulator.org/mantis/view.php?id=1461 ) which can be used.
2011-09-15 22:59:29 +01:00
de19dc3024
refactor: rename SOG/SOP.GetProperties() to SendPropertiesToClient() to reflect what it actually does
...
This also makes it consistent with some other methods that send data to the client.
2011-09-15 18:58:58 +01:00
a4cc5f628f
Only bother to create an inventory xfer file if there are any items in a prim inventory
2011-09-15 18:42:10 +01:00
8fb3e71b14
Shuffle order of code in invnetory connector GetFolderContent() calls to avoid a possible race condition
2011-09-15 18:36:22 +01:00
42f1b88eb2
If a prim inventory becomes empty through deletion, send an empty xfer file name rather than one that references a metadata file containing only the folder object.
...
If we do this, then viewer 3 crashes when we try and rez a script directly in an attachment's prim inventory.
Sending an empty file name was already being done if the prim's inventory had never been touched.
Now we always do that if there are no items in that inventory.
Hopefully addresses the remaining point in http://opensimulator.org/mantis/view.php?id=5644
2011-09-15 18:13:36 +01:00
bd991fc95f
Don't try and delete attachments for child agent close
2011-09-13 22:54:50 +01:00
1084d8f6a2
Remove code from DetachSingleAttachmentToInv() that sets group changed on all parts, now that we're performing this check in UpdateKnownItem() for other purposes
2011-09-13 22:39:06 +01:00
61affee814
remove redunant itemID and agentID arguments from UpdateKnownItem().
...
itemID is always taken taken from the group's stored item id, and agentID is never used.
2011-09-13 22:33:15 +01:00
2d62484f11
Remove UpdateKnownItem() from IAttachmentsModule.
...
It's not appropriate for code outside the attachments module to call this.
2011-09-13 22:27:33 +01:00
62b3e74bc5
minor: remove redundant grp != null check from AM.UpdateKnownItem()
2011-09-13 22:24:33 +01:00
8880aea728
Stop attempts to rewear already worn items from removing and reattaching.
...
Viewer 2/3 will sometimes attempt to rewear attachments, even though they have already been attached during the main login process.
This change ignores those attempts.
This stops script failures during login, as the rewearing was racing with the script startup code.
It might also help with attachments being abnormally put into deleted state.
Hopefully resolves some more of http://opensimulator.org/mantis/view.php?id=5644
2011-09-13 22:13:58 +01:00
618277e797
Comment out attachments code in Scene.IncomingCreateObject(UUID userID, UUID itemID) for now
...
As far as I can see, this is only invoked by a PUT request to ObjectHandlers, which is not being used anyway.
Invoking attachments code at this point is probably inappropriate since it would still be invoked when the client entered the scene.
Being commented to simplify analysis of attachments issues. Can be uncommented when in use.
Also, small tweak to lock and log removal of a SOG from the SceneObjectGroupsByLocalPartID collection in SceneGraph.GetGroupByPrim() if an inconsistency is found.
2011-09-13 20:25:32 +01:00
df73833a2c
stop the duplicate remove of the root part ids from the full part and local part indexes in SG.DeleteSceneObject()
...
this is unnecessary because the parts array iterated through contains the root part as well as the non-root parts
2011-09-13 18:11:13 +01:00
f09a90d8a7
extend TestGetSceneObjectByPartLocalId() to test state after scene object deletion
2011-09-13 18:08:05 +01:00
07ba28f1de
In SG.AddSceneObject(), stop unnecessarily adding the root part to object indexes sepearately from the other parts.
...
The SOG.Parts property contains the root part as well as the non-root parts
2011-09-13 17:56:02 +01:00
c14f0a22d4
Add new TestGetSceneObjectByPartLocalId() for retrieving a scene object via the local id of one of its parts
2011-09-13 17:52:10 +01:00
88bd71b978
improve TestAddSceneObject() to test a multi-part object rather than a single-part
2011-09-13 17:40:39 +01:00
306af9934a
In an object return message, send a null-terminated empty string in binary bucket to prevent a viewer 3 crash.
...
This is the message sent to the client when the object is returned.
We were sending byte[0] in the binary bucket. This didn't kill viewer 1 but did terminate viewer 3 (don't know about viewer 2).
So sending "\0" instead.
This is to address http://opensimulator.org/mantis/view.php?id=5683
2011-09-13 17:13:42 +01:00
dea0935361
eliminate redundant SP.m_regionInfo since it always has the scene.
...
We were already referencing through the scene in some places.
2011-09-12 23:00:15 +01:00
62b2450529
remove the unused SP.initializeScenePresence()
2011-09-12 22:54:54 +01:00
56cd7d9685
stop the redundant passing in of RegionInfo to SceneGraph, since the Scene is always passed in at the same time.
2011-09-12 22:51:56 +01:00
00f8946bd4
minor: if the script engine fails to find a prim for a script, also print out that prim's local id in the error message.
2011-09-12 22:44:14 +01:00
294120c9d3
comment out some recent terrain texture logging
2011-09-12 22:26:04 +01:00
ea0f78c971
Start locking entire add/remove operations on an IScenePresence.AttachmentsSyncLock object
...
Attach and detach packets are processed asynchronously when received from a viewer.
Bugs like http://opensimulator.org/mantis/view.php?id=5644 indicate that in some situations (such as attaching/detaching entire folders of objects at once), there are race conditions between these threads.
Since multiple data structures need to be updated on attach/detach, it's not enough to lock the individual collections.
Therefore, this commit introduces a new IScenePresence.AttachmentsSyncLock which add/remove operations lock on.
2011-09-12 21:57:22 +01:00
dab6387bba
lock AvatarAppearance.m_attachments when we use it
...
This is partly to address http://opensimulator.org/mantis/view.php?id=5644 , though something more thorough is needed.
2011-09-12 21:05:26 +01:00
7f318277f1
When creating an OAR, optionally exclude objects according to their permissions
2011-09-12 20:09:24 +01:00
517932722b
minor: put <remarks> tags around some method doc
2011-09-12 20:06:09 +01:00
728fd0b1b8
lock attachments when enumerating through them in ScenePresence.CopyTo().
...
May have some effect on http://opensimulator.org/mantis/view.php?id=5644
2011-09-10 01:09:17 +01:00
9c32b131fd
Add extra log information when attachments fail validation
2011-09-10 00:57:52 +01:00
7531851bec
reinstate the validation logging on teleport. A 'fail' of validation still doesn't prevent the actual teleport.
2011-09-10 00:45:50 +01:00
de28c9cd24
Stop the UserManagementModule logging every user it adds for now
2011-09-10 00:23:52 +01:00
1dd904b78e
Delay loading scripts until the scene has finished loading
2011-09-09 23:01:05 +01:00
7cafc2e46e
Added a check to the CreateRegion method of the RemoteAdmin module that the specified user exists.
...
A meaningful exception message is returned if the user is not found. Previously it was returning "Object not set..."
2011-09-09 22:59:00 +01:00
28961dd1cf
llSetPrimitiveParams Prim type params precision errors
2011-09-09 22:53:45 +01:00
bea2e0f32b
Comment out the part of the load oar code that zeroes out prim sit target orientations and positions.
...
The warning about these causing problems is very old and may no longer apply.
Hopes to fix http://opensimulator.org/mantis/view.php?id=5680
2011-09-09 22:50:54 +01:00
655935db49
Use a copy of the inventory items list to register users in the thread started by GetFolderContent(), to protect ourselves against callers modifying lists
...
Hopefully this addresses http://opensimulator.org/mantis/view.php?id=5681
2011-09-09 19:55:30 +01:00
42790f021f
Fix unit tests from RegionSettings commit
2011-09-09 00:47:23 +01:00
086bf9f15d
Save the default terrain texture UUIDs for a new region instead of leaving them as UUID.Zero.
...
Leaving them at UUID.Zero meant that when a viewer 2 logged into a region that had been freshly created, it received UUID.Zero for these textures, and hence display the land as plain white.
On a simulator restart, the problem would go away since when the database adapators loaded the new region settings, RegionSettings itself has code to use default textures instead of UUID.Zero.
This commit resolves the problem by saving the default texture UUIDs instead of Zero.
However, we currently have to do this in a roundabout way by resaving once the RegionSettings have been created by the database for the first time. This needless complexity should be addressed.
This change will also have the effect of replacing any existing UUID.Zero terrain textures with the default ones.
However, this shouldn't have any effect since the UUID.Zeros were already being replaced in memory with those same UUIDs.
2011-09-09 00:38:04 +01:00
f5eace6781
Fix test failure. Oversight in setting up the tests themselves.
2011-09-08 21:54:40 +01:00
9615292133
Centralize module setup for NPC tests.
...
This is overkill for some tests since they dont' need all the modules, but I think the gain in code readability is worth it
2011-09-08 21:06:10 +01:00
96a3b68086
Remember to set and unset the fire and forget method at the top of the attachment and npc tests
2011-09-08 20:59:52 +01:00
bd5d2cb043
Use scene presence agent id for rezzed object ownership rather than item owner.
...
These should be identical. However, the item isn't available when rezzing npc attachments.
2011-09-08 20:51:52 +01:00
3e7960d161
Increase information in logging for UserAgentServiceConnector.
...
Done for http://opensimulator.org/mantis/view.php?id=5669
2011-09-08 19:52:28 +01:00
08bd16285d
When invoking any of the OSSL teleport functions, do it on a separate thread rather than the script thread.
...
This is to prevent the aborting of attachment script threads on teleport from aborting the one actually doing the teleport.
This allows OSSL teleport functions to work when invoked on scripts in attachments (and huds, I assume)
2011-09-07 23:55:41 +01:00
7cadb89a0f
When a region is added to the HG Inventory Broker, also pass this through to the embedded local inventory connector to prevent an NRE when that connector tries to lookup the UserManager through the scene.
...
This is to address http://opensimulator.org/mantis/view.php?id=5669
However, if this failure was happening I'm kind of surprised that local HG inventory was working at all.....
We probably weren't seeing these exceptions previously because we weren't logging them when the reached the top of a FireAndForget thread.
2011-09-07 23:16:19 +01:00
d7a516d885
Add temporary debugging in HGInventoryBroker and RemoveXInventoryServiceConnector
...
This is for http://opensimulator.org/mantis/view.php?id=5669
If we can't retrieve an IUserManagement module we complain, and we also warn in the log when its manually set in XISC by HGInventoryBroker
2011-09-06 23:16:37 +01:00
e6cd4defdb
Lock m_pendingObjects when calling GetPendingObjectsCount().
...
This is only called by a region console command.
We should also be locking m_partsUpdateQueue when dequeueing the next part, or locking m_pendingObjects in QueuePartForUpdate().
However, I won't do this now since I don't have time to analyze how this would affect liveness.
2011-09-06 22:48:05 +01:00
3d4d3427cd
Comment out SceneViewer.Reset() and stop calling from Close() since this is useless work as a closed scene object is never reset.
...
Strictly speaking, we could also stop bothering to clear the m_updateTimes and m_partsUpdateQueue if we are sure that the whole SceneViewer is shortly to be garbage collected anyway, but we'll leave them around for now.
2011-09-06 22:44:34 +01:00
405a5b097b
Comment out unused ISceneViewer.Reset() to reduce code complexity
2011-09-06 22:39:01 +01:00
4bf3adffb8
In SceneViewer, introduce an IsEnabled flag and perform Close() under an m_pendingObjects lock in order to avoid the race condition seen by danbanner in http://opensimulator.org/mantis/view.php?id=5669
2011-09-06 22:26:28 +01:00
1a8f5b97b9
refactor: Make logic in AM.AttachObject() clearer by not reusing existing variables in different contexts
2011-09-06 02:40:19 +01:00
5beee42809
rename AM.AddSceneObjectAsAttachment() to AddSceneObjectAsNewAttachmentInInv
2011-09-06 02:29:22 +01:00
b903d2ca96
In SetAttachment, if the existing attachment has no asset id then carry on rather than abort.
...
When a user logs in, the attachment item ids are pulled from persistence in the Avatars table. However,
the asset ids are not saved. When the avatar enters a simulator the attachments are set again. If
we simply perform an item check then the asset ids (which are now present) are never set, and NPC attachments
later fail unless the attachment is detached and reattached.
Hopefully resolves part of http://opensimulator.org/mantis/view.php?id=5653
2011-09-06 01:59:21 +01:00
c6ec573d10
Get rid of the confusing version of IAttachmentsModule.RezSingleAttachmentFromInventory() with the updateInventoryStatus switch, since this is never called with false
2011-09-06 00:36:38 +01:00
05a4bedc30
get rid of the unused AttachmentsModule.ShowAttachInUserInventory()
2011-09-06 00:32:52 +01:00
0cb0140a1d
Stop the pointless double setting of every attachment in AvatarAppearance.
...
The second was already being filtered out so this has no user level effect
2011-09-06 00:29:37 +01:00
cf73afec35
Try disabling the inconsistent attachment state check to see if this actually has an impact.
...
The code in question is over three years old and just be catching an inconsistency rather than being wholly necessary.
This commit still carries out the check and prints all the previous log warnings but a 'failure' no longer prevents avatar region crossing or teleport, and it doesn't give the client the error message.
This will have some kind of impact on http://opensimulator.org/mantis/view.php?id=5672
2011-09-05 23:42:37 +01:00
5e579b71fd
Allow the HGInventoryBroker to set the UserManager when it instantiates a RemoteXInventoryServiceConnector for a visiting HG user.
...
Not doing this causes NREs whenever that user tries to access inventory when Hypergrid is turned on since the Remote connector does not have a scene (which is only used to fetch the UserManager)
Aims to address http://opensimulator.org/mantis/view.php?id=5669
2011-09-05 22:55:48 +01:00
5c1fa968ab
Stop NPCs losing attachments when the source avatar takes them off.
...
This was happening because we were using the source avatar's item IDs in the clone appearance.
Switch to using the asset IDs of attachments instead for NPCs.
The InventoryAccessModule and AttachmentModule had to be changed to allow rezzing of an object without an associated inventory item.
Hopefully goes some way towards resolving http://opensimulator.org/mantis/view.php?id=5653
2011-09-03 01:11:16 +01:00
e6eb0d9a6f
Comment out Scene.CleanDroppedAttachments() and calls.
...
This method wasn't actually doing anything since dropped attachments retain a PCode of 9.
Also, behaviour of dropped attachments in other places appears to be that they persist after avatar logout rather than get deleted.
2011-09-02 23:19:27 +01:00
dbcfb25a52
Remove redundant RootPart.CreatedSelected = true in IAM.RezObject() since this is done through parts iteration
2011-09-02 22:54:03 +01:00
26b471f25a
Go back to resetting the State parameter for all parts of a SOG when SOG.ClearPartAttachmentData() is called.
...
Even though we don't use these on rez they are still present after an unlink, after which selecting them causes various viewers to crash
Hopefully really does address http://opensimulator.org/mantis/view.php?id=5664
2011-09-02 22:28:27 +01:00
af7c6c5f39
stop passing FromUserInventoryItemID right down into the deserializer.
...
the code becomes simpler if this is set from the outside - only one place needs to do this.
2011-09-02 00:50:16 +01:00
9c0a03731d
Move more of IAM.RezObject() into DoPreRezWhenFromItem()
2011-09-02 00:41:21 +01:00
15ea82e925
move more of IAM.RezObject() into DoPreRezWhenFromItem()
2011-09-02 00:25:05 +01:00
01146bb3e3
factor out a section of IAM.RezObject() into DoPreRezWhenFromItem()
2011-09-02 00:04:22 +01:00
3e86064d6b
refactor: factor out DoPostRezWhenFromItem() from IAM.RezObject()
2011-09-01 23:49:38 +01:00
cc8897127b
remove the pointless m_Scene.GetNewRezLocation() call at the top of IAM.RezObject() since its always recalculated later on anyway
2011-09-01 23:37:03 +01:00
712d44635a
refactor: Move sanity checks to the top of IAM.RezObject() to make the code more readable
2011-09-01 23:14:50 +01:00
e30651b931
use group.RootPart in IAM.RezObject() rather than group.GetChildPart(group.UUID);
2011-09-01 23:09:14 +01:00
8b83c4a433
Remove pointless NRE check in IAM.RezObject() since this can never occur
2011-09-01 23:06:57 +01:00
1bf29d60e1
Remove code which was automatically deleting non-root prims from scene objects that had previous been attachments.
...
Looks like this code was accidentally uncommented in e1b5c612http://opensimulator.org/mantis/view.php?id=5664
2011-09-01 22:05:05 +01:00
616e672fce
If the user receiving an inventory folder has left the scene by the time the acceptence message arrives, then don't send them an inventory update.
...
Doing so causes a NullReferenceException
2011-09-01 02:43:17 +01:00
c491cdcb95
refactor: use SOG register target waypoints and rots directly instead of calling through the SOP, which doesn't make conceptual sense anyway.
2011-09-01 02:18:31 +01:00
7eca929686
Eliminate pointless checks of SOG.RootPart != null
...
It's never possible for SOG to have no RootPart, except in the first few picosends of the big bang when it's pulled from region persistence or deserialized
2011-09-01 02:11:00 +01:00
10d883dc88
refactor: use ParentGroup.UUID directly instead of SOP.GetRootPartUUID()
2011-09-01 01:41:53 +01:00
63bf710237
Fix issue with llGetTorque() where it would only ever return a zero vector.
2011-09-01 01:37:35 +01:00
095b3e5756
Remove pointless cluttering SOP.ParentGroup != null checks.
...
The only times when ParentGroup might be null is during regression tests (which might not be a valid thing) and when scene objects are being constructed from the database.
At all other times it's not possible for a SOP not to have a SOG parent.
2011-09-01 01:22:28 +01:00
083ba72b28
Fix a bug where the non-root parts of rezzed objects that had previously been attachments were sending their old attachment values to the client.
...
The root part state is the canonical value, so always send that instead.
Sending conflicting attachments states for non-root parts of a rezzed object is enough to crash the client.
Fixes http://opensimulator.org/mantis/view.php?id=5664 .
Many thanks to mewtwo0641 for some fantastic qa work on this one.
2011-08-31 23:33:01 +01:00
ca9a054bba
Don't set a GridUser entry for NPCs.
...
Resolves http://opensimulator.org/mantis/view.php?id=5665
2011-08-31 18:03:07 +01:00
7d58b5fa15
move common code into AttachmentsModule.DeleteAttachmentsFromScene()
2011-08-31 17:53:58 +01:00
3aa86d22d1
If a FireAndForget thread terminates with an exception, then catch and log rather than letting it terminate the simulator.
...
Exceptions don't appear to do this with the SmartThreadPool but they do with UnsafeQueueUserWorkItem (and maybe others)
2011-08-31 17:38:32 +01:00
e69f246b86
refactor: move multiple class to set avatar height into associated SP.AddToPhysicalScene()
2011-08-31 17:25:18 +01:00
899d109e82
get rid of appearance null checks - this is never null
2011-08-31 17:13:53 +01:00
8c703022c1
In WorldCommModule, replace the useless Attachments == null check with Attachments.Count == 0 instead
2011-08-31 16:50:18 +01:00
d3c03658aa
minor: remove mono compiler warning
2011-08-31 16:48:21 +01:00
54839d28ad
remove pointless m_attachments == null check since this field is never null
2011-08-31 16:46:43 +01:00
5a5206449f
minor: seal up another instance of using the appearance list without locking
2011-08-31 16:41:58 +01:00
32444d98cb
Make SP.Attachments available as sp.GetAttachments() instead.
...
The approach here, as in other parts of OpenSim, is to return a copy of the list rather than the attachments list itself
This prevents callers from forgetting to lock the list when they read it, as was happening in various parts of the codebase.
It also improves liveness.
This might improve attachment anomolies when performing region crossings.
2011-08-31 16:29:51 +01:00
2acfff9f6d
remove pointless ToArray() call in AttachmentsModule.SaveChangedAttachments()
2011-08-30 23:39:26 +01:00
1809aaf74c
minor: remove already processed avatar null check in Scene.RemoveClient()
...
remove some now duplicated method doc
2011-08-30 23:36:45 +01:00
ddc733cd3d
refactor: move SP.SaveChangedAttachments() fully into AttachmentsModule
2011-08-30 23:32:30 +01:00
04bafd2122
refactor: Move ScenePresence.RezAttachments() into AttachmentsModule
...
This adds an incomplete IScenePresence to match ISceneEntity
2011-08-30 23:06:10 +01:00
a90e1cf3aa
add Name property to ISceneEntity
2011-08-30 22:39:16 +01:00
1de68b34d9
refactor: migrate DropObject handling fully into AttachmentsModule from Scene
2011-08-30 22:25:38 +01:00
37a5cf5783
minor: comment out friends number logging from login for now
2011-08-30 22:08:43 +01:00
e7a515bab0
Fix bug where attachments were remaining on the avatar after being dropped.
...
If the inventory service is configured not to allow deletion then these will not disappear from inventory
2011-08-30 22:06:24 +01:00
17dab7245f
Merge branch 'master' into bulletsim
2011-08-30 08:44:28 -07:00
be357f8fee
Fix bug in persisting saved appearances for npcs
...
Assets have to be marked non-local as well as non-temporary to persist. This is now done.
Hopefully addresses http://opensimulator.org/mantis/view.php?id=5660
2011-08-30 01:58:32 +01:00
96dce3e16c
Use GetMeshKey from PrimitiveBaseShape.
2011-08-29 10:10:48 -07:00
648866b597
Merge branch 'master' into bulletsim
2011-08-29 09:55:34 -07:00
18037d41c4
Move GetMeshKey from buried inside Meshmerizer to a public method on PrimitiveBaseShape
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-08-28 16:50:54 -04:00
80a2b81d52
Add level of detail specification to optionally reduce the number of vertices in generated prim meshes
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-08-28 16:49:25 -04:00
795b56e695
Related to #4689 - Adding missing null check for SceneObjectPart
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-08-27 07:45:02 -04:00
d4d894c20f
Stop avatars returning from neighbouring regions from stalling on the border crossing.
...
On making a root agent, we need to reset the ScenePresence.m_movement_flag so that it doesn't remember the
movement registered to the client when it exited the initial region.
If this is remember, then the client avatar movement isn't updated and it appears to stall in mid-air, though this is resolved with a prod/release of any other direction key.
This bug was probably introduced a few weeks ago. Surprised that nobody brought it up.
2011-08-27 01:28:33 +01:00
1615e7d29f
Eliminate duplicate AttachmentPoint properties by always using the one stored in the root part's state field.
2011-08-27 00:33:24 +01:00
b7700428ec
refactor: camel case AttachmentPoint method arg as per code standards
2011-08-27 00:20:15 +01:00
33a894f3d2
refactor: move SOP.IsAttachment and AttachmentPoint up into SOG to avoid pointless duplication of identical values
2011-08-27 00:15:21 +01:00
21708b832b
BulletSim: add mesh representation. Use meshes for static objects and switch to hulls for physical objects.
2011-08-26 15:51:21 -07:00
23f10f1d22
Merge branch 'master' into bulletsim
2011-08-26 15:23:46 -07:00
15a514fcbc
refactor: simplify SOP.AttachedAvatar into SOG.AttachedAvatar
...
This does a tiny bit to reduce code complexity, memory requirement and the cpu time of pointlessly setting this field to the same value in every SOP
2011-08-26 23:06:41 +01:00
5f3ffc195f
refactor: move SOG.DetachToGround() to AttachmentsModule.DetachSceneObjectToGround() and remove redundant code
2011-08-26 22:49:11 +01:00
ae614c1264
refactor: simplify DetachSingleAttachmentToGround() by retrieving the scene object group direct
2011-08-26 22:37:53 +01:00
040ad11e61
refactor: remove common presence set up in attachments tests
2011-08-26 22:24:51 +01:00
dc61bf4b1f
comment out verbose test logging from last commit
2011-08-26 22:17:27 +01:00
1dba047e4d
add regression test for detaching an attachment to the scene
2011-08-26 22:17:05 +01:00
002313bf13
refactor: move sog.DetachToInventoryPrep() into AttachmentsModule.DetachSingleAttachmentToInv()
2011-08-26 22:02:23 +01:00
fcbed6479a
Downgrade warning about not saving unchanged attachment to debug instead, and change text to better indicate what it's saying
2011-08-26 21:46:12 +01:00
6c692d2e21
Fix a very recent regression from llAttachToAvatar() fix where I accidentally stopped normal script state persistence on login/logout and attach/detach
2011-08-26 21:26:29 +01:00
04d42860fe
Merge branch 'master' of /home/opensim/src/opensim
2011-08-25 07:01:57 -04:00
cf42fcd978
llSetPrimitiveParams correct prim hollow for cases where limit should be 70%.
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-08-25 06:50:55 -04:00
4b4c5e69e5
Remove forcing of phantom on ground attached objects - attachments can be both non-phantom and flagged as physical.
...
As per Melanie
2011-08-24 22:45:51 +01:00
d5dc8133fc
remove pointless IsDeleted check on SP.RezAttachments()
...
IsDeleted is never set for an SP, even though it's on EntityBase.
It might be an idea to set it in the future
2011-08-24 22:37:08 +01:00
6d4432f440
refactor: simplify EntityBase.IsDeleted property
2011-08-24 22:34:26 +01:00
21f1b68fdf
extend initial rez regression test to check that attachment is phantom
2011-08-24 22:25:23 +01:00
73d913dad2
Make objects attached from the ground phantom
2011-08-24 22:12:51 +01:00
9ba4511d3e
add SOG helper properties IsPhantom, IsTemporary, etc. to improve code readability
...
use these in some sog methods
2011-08-24 21:53:12 +01:00
801b7f18a7
return InventoryItemBase from AddSceneObjectAsAttachment()
2011-08-24 21:40:36 +01:00
5eeee480d4
refactor: move Scene.Inventory.attachObjectAssetStore() into AttachmentsModule.AddSceneObjectAsAttachment()
2011-08-24 21:35:44 +01:00
274e354006
get rid of pointless grp null check in attachObjectAssetStore()
2011-08-24 21:23:10 +01:00
0e0d40c810
minor: remove hardcoded region numbers with the region size constant and a currently hardcoded offset
2011-08-24 21:18:11 +01:00
ccf07f6ae3
refactor: remove pointless AgentId argument from attachObjectAssetStore()
2011-08-24 21:14:57 +01:00
b9ec625dbf
add TestAddAttachmentFromGround() regression test
2011-08-24 21:07:46 +01:00
cf3ffe5bb4
Fix llAttachToAvatar()
...
Apart from one obvious bug, this was failing because attempting to serialize the script from inside the script (as part of saving the attachment as an inventory asset) was triggering an extremely long delay.
So we now don't do this. The state will be serialized anyway when the avatar normally logs out.
The worst that can happen is that if the client/server crashes, the attachment scripts start without previous state.
2011-08-24 20:49:23 +01:00
97b207240e
rename AttachmentsModule.ShowDetachInUserInventory() to DetachSingleAttachmentToInv() for consistency and to reflect it's actual behaviour
2011-08-23 22:05:22 +01:00
014cd4f8bb
remove mono compiler warnings
2011-08-23 21:41:16 +01:00
805ba268d5
replace TestRemoveAttachments() with a more thorough TestRemoveAttachment()
2011-08-23 21:37:36 +01:00
4a101080ee
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-08-23 21:21:02 +01:00
34aed96a2f
replace old TestAddAttachments() with a more thorough TestAddAttachment()
2011-08-23 21:20:23 +01:00
ce011d7e44
Protect a check for default texture entry when setting alpha values. Apparently
...
if all faces have their own textures then the default texture is null
2011-08-23 10:52:12 -07:00
afd5469eec
Remove pointless contains check in ScenePresence.RemoveAttachment()
2011-08-23 00:08:29 +01:00
1f3ce48be1
If an object failed to attach due to an exception, then try and detach it from the avatar's list of attachments as well as delete it from the scene.
...
This may help with the "Inconsistent attachment state" errors seen on teleport.
See http://opensimulator.org/mantis/view.php?id=5644 and linked reports
2011-08-23 00:04:38 +01:00
d328046efb
If an attachment fails, then start logging the exception for now, in order to help with the inconsistent state bug.
...
This also refactors AttachmentsModules to stop pointlessly refetching the ScenePresence in various methods. However, more of this is required.
2011-08-22 23:59:48 +01:00
2eaadf2dc0
Add warning log message to say which attachment fails validation in order to pin down problems with "Inconsistent Attachment State"
2011-08-22 23:28:37 +01:00
138a5e04b8
minor: remove mono compiler warning
2011-08-22 23:10:43 +01:00
940a248c3d
minor: comment out simulator features log line
2011-08-22 22:44:49 +01:00
7cf4bb5256
Add ISimulatorFeaturesModule so that other modules can register features in addition to the hardcoded ones.
2011-08-22 22:13:07 +01:00
db91044593
Thanks Neil Canham for fixing bulk inventory updates, no sending BulkInventoryUpdate after accepting inventory items.
2011-08-22 14:51:43 +02:00
d74686fd51
read m_rpcHandlersKeepAlive under appropriate lock
2011-08-22 02:25:58 +01:00
c587b0a3a3
oops, fix build break from last commit
2011-08-22 02:10:45 +01:00
9469c62098
improve locking of m_agentHandlers in BaseHttpServer
2011-08-22 02:07:51 +01:00
f9a367e2f6
improve locking of m_HTTPHandlers in BaseHttpServer
2011-08-22 01:59:40 +01:00
5a11cffd23
improve locking of m_streamHandlers in BaseHttpServer
2011-08-22 01:58:50 +01:00
20a4367827
remove necessity to catch a KeyNotFoundException in BaseHttpServer.RemoveLLSDHandler()
2011-08-22 01:58:19 +01:00
8254116dc6
improve locking of m_llsdHandlers in BaseHttpServer
2011-08-22 01:52:08 +01:00
2f1ac1d144
minor: remove mono compiler warning
2011-08-22 01:45:46 +01:00
94a8ab80c8
improve locking of m_rpcHandlers in BaseHttpServer
2011-08-22 01:43:34 +01:00
5e231acdce
Add avatar and attachments to llRegionSay
...
llRegionSay will now message avatars on chan 0
and will message attachments on the avatar that
listen on channels other than 0.
This behavior is consistant with the LL
implementation as tested on regions in Agni
with one exception: this implementation does
not include issue:
https://jira.secondlife.com/browse/SCR-66 ?
2011-08-20 12:36:35 -04:00
2787207aa2
Add llRegionSayTo
...
llRegionSayTo(key target, integer channel, string messasge)
Allows messages to be sent region-wide
to a particular prim.
2011-08-19 18:47:21 -04:00
384cb79a1a
Merge branch 'master' into bulletsim
...
Conflicts:
OpenSim/Region/Framework/Scenes/SceneManager.cs
2011-08-19 14:49:16 -07:00
bb5b396fc5
Fix exception when using BasicPhysics
2011-08-19 00:53:57 +01:00
c9e6b7bd10
Stop NPC's getting hypergrid like names in some circumstances.
...
This meant punching in another AddUser() method in IUserManagement to do a direct name to UUID associated without the account check (since NPCs don't have accounts).
May address http://opensimulator.org/mantis/view.php?id=5645
2011-08-19 00:45:22 +01:00
3146f4bae0
Don't need to try both AssetService.Get and GetCached in GetMesh since Get always calls GetCached and code paths were identical
2011-08-18 23:36:43 +01:00
fef73a1a10
BulletSim: add runtime setting of physics parameters. Update default values.
2011-08-18 14:32:09 -07:00
49258350e8
refactor: fold CreateSceneViewer() back into ScenePresence constructor
2011-08-18 01:22:01 +01:00
8d29d490a1
minor: remove some mono compiler warnings
2011-08-18 01:16:58 +01:00
45c37ef494
refactor: Fold 3 ScenePresence() constructors into one since only one is called.
2011-08-18 01:11:23 +01:00
c1a34cd8da
Don't try to save changed attachment states when an NPC with attachments is removed from the scene.
...
This is done by introducing a PresenceType enum into ScenePresence which currently has two values, User and Npc.
This seems better than a SaveAttachments flag in terms of code comprehension, though I'm still slightly uneasy about introducing these semantics to core objects
2011-08-18 00:53:05 +01:00
d8f886ccdb
comment out noisy attachments logging
2011-08-17 23:41:20 +01:00
eb8b6b7d52
minor: remove mono compiler warning
2011-08-17 23:28:57 +01:00
6b51d8a10e
In the asset service, check that an asset exists before attempting to store it.
2011-08-17 23:24:41 +01:00
4a9b8184f7
For now, supress 'OH NOES' warnings given by HGInventoryBroker.CacheInventoryServiceURL when it tries to cache it for an NPC
...
This concept is meaningless for NPCs. However, it might be better to make NPCism an actual property on ScenePresence and check.
Addresses http://opensimulator.org/mantis/view.php?id=5643
2011-08-17 01:51:58 +01:00
acfdca34fd
Fix issue where loading a new appearance onto an NPC would not remove the previous attachments from the scene.
...
Addresses http://opensimulator.org/mantis/view.php?id=5636
2011-08-17 01:35:33 +01:00
bd5d35ee32
extend test to check that there is one attachment and that it has the right name
2011-08-17 00:42:58 +01:00
696bd44833
Add new regression TestRezAttachmentsOnAvatarEntrance() to do simple attachments check
2011-08-17 00:37:33 +01:00
d73c424078
get rid of logged warnings about lack of some modules - afaik these never occur in real life and just clutter up tests
2011-08-16 23:12:58 +01:00
57e54d84d6
Add new FireAndForgetMethod.None.
...
This executes the callback on the same thread that made the request. Designed for use only by regression tests that rely on a predicable event ordering.
2011-08-16 23:05:08 +01:00
d3c10e609e
Move some previously common code back into separate tests. Remove unused region handle from test.
2011-08-16 22:27:52 +01:00
0bbf7c21d7
Isolate existing incomplete attachments tests rather than have them rely on each other.
...
Much easier to debug this way.
2011-08-16 22:13:32 +01:00
c58b32e7ba
drop number of attachments in test from 3 to 2 to reduce text complexity
2011-08-16 22:09:13 +01:00
601257f8b6
remove setting up of second scene in attachments since it's not currently used
2011-08-16 21:58:52 +01:00
66eb537d0c
relocate AttachmentTests.cs to AttachmentsModuleTests.cs
2011-08-16 21:56:56 +01:00
8d866ae8c3
minor: remove some mono compiler warnings
2011-08-16 21:45:01 +01:00
fd3a7ab70c
minor: change some comment text in flotsam asset cache
2011-08-16 21:31:17 +01:00
8c95c83562
On Flotsam asset cache, go back to moving the file from the temporary location rather than copying.
...
Copying doesn't prevent IOExceptions on Windows due to file locking. (e.g. Mantis 5642, 5630).
So instead go back to moving the file, swallowing IOExceptions that occur just for the move due to competing caching threads or even different opensimulator instances.
2011-08-16 21:03:43 +01:00
0784791a44
Add "shutdown" message to RegionReady
...
Add "shutdown" message when removing region.
From a patch submitted by Michelle Argus.
Thanks Michelle
2011-08-15 16:21:04 -04:00
e8f09cd5f7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-08-15 13:04:02 -04:00
e870442e31
Remove un-needed ATTACH command in migration script.
...
This was causing issues when using specified
paths to database files by using a hard-coded
name.
2011-08-15 12:59:17 -04:00
9a6ad1535e
Added console command "delete object outside" to delete all objects outside region boundaries. This is especiyll useful in cases where physical objects outside regions boundaries cause much physics engine lag.
2011-08-15 17:46:51 +02:00
70ea625447
Added optional Login Service parameter "Currency" to be able to change the currency name shown in the viewer.
2011-08-14 18:20:20 +02:00
e19843a0ee
WorldMap: Added map item for Land-for-Sale. Implemented backlist item timeouts (default 10 minutes; see also new config file setting BlacklistTimeout) and removing backlisted neigboring regions that have been restarted from the blacklist.
2011-08-14 17:45:23 +02:00
b80dfb6572
llGetPrimitiveParams fix prim hollow/hole shape value
2011-08-13 15:34:08 +01:00
dcb4b2de09
Fix a problem in the Flotsam asset cache where assets were being put into the memory cache even when it wasn't enabled.
...
This hopefully addresses http://opensimulator.org/mantis/view.php?id=5634
This is the most probable cause of the memory problems that people have been seeing in the past month.
This bug has been around since commit 5dc785b
2011-08-13 15:21:03 +01:00
90c6fa89be
Fix a bug preventing region modules from creating trees at anything but the default scale.
2011-08-13 00:52:32 +01:00
78ff82bfe9
If a map request to a server fails, always close the outbound connection.
...
This probably doesn't help with the current memory leak.
2011-08-12 23:40:22 +01:00
ed142ead25
minor: change login enable/disable messages in last commit so that they occur after the setting has been made
2011-08-12 22:50:58 +01:00
4b88f04c0a
minor: On "login disable/enable" always tell the user the final login status, rather than remaining silent if it was already on/off
2011-08-12 22:46:42 +01:00
76e0afe83f
tidy up some OSSL NPC parameter names
2011-08-12 02:46:44 +01:00
16ac5413dd
rename position parameter in osNpcMoveToTarget to target
2011-08-12 01:52:12 +01:00
aebd46a434
rename osNpcStopMoveTo() to osNpcStopMoveToTarget()
2011-08-12 01:32:49 +01:00
2169cf04f9
When saving appearance, only save the baked textures, not the other face textures (which are already stored permanently)
2011-08-12 01:24:15 +01:00
65c4b8d37b
Fix kicking of NPCs via "kick user" console command.
...
Needed to hook up the Close() function in the NPCAvatar IClientAPI implementation, which [unfortunately] is still needed
2011-08-12 00:51:05 +01:00
0a1bbc27d2
Allow the osNpcCreate() function to accept a notecard name or asset for initial appearance
2011-08-12 00:14:06 +01:00
d23d37d2aa
implement osNpcGetPos()
2011-08-11 23:36:22 +01:00
a21e98ae1a
implement osNpcGetRot() and osNpcSetRot()
...
Rotation works if done around the z axis. Anything else leads to random results.
2011-08-11 23:28:14 +01:00
b1ae930c6b
Implement osAgentSaveAppearance() to save the appearance of an avatar in the region to a notecard
...
This is separate from osOwnerSaveAppearance() so that owner saves can be allowed without allowing arbitrary avatar saves
2011-08-11 22:26:47 +01:00
50945dd560
add regression test for osNpcCreate when cloning an in-region avatar
2011-08-11 21:43:26 +01:00
83ca5a101d
Split out to-be-common setup stuff from TestOsOwnerSaveAppearance()
2011-08-11 20:56:18 +01:00
b3a4b10531
eliminate redundant ground sitting checks since these are already done in enclosing control structures
2011-08-11 03:16:46 +01:00
3d4cc93a8e
minor: a little bit of log message correction/commenting out
2011-08-11 03:07:41 +01:00
1aa1711893
eliminate the rotation parameter from SP.HandleMoveToTargetUpdate(). This can just use the currently set Rotation
...
looks like I spoke to soon about eliminating jerkiness on "go here"/autopilot. It's still there.
2011-08-11 03:06:38 +01:00
36f7d36fa1
instead of setting avatar rotation twice in SP.HandleAgentUpdate(), eliminate the second setting in AddNewMovement()
2011-08-11 02:54:15 +01:00
29093df1a7
get rid of intermediate local store of body rotation in ScenePresence, this is not used.
2011-08-11 02:36:02 +01:00
ee22569c92
only accept npc UUIDs to osNpc* functions, not names (except for create)
2011-08-11 02:19:13 +01:00
cace6eaa8a
comment out some of the currently less useful debug log messages
2011-08-11 02:06:32 +01:00
4402851b08
Get NPCs to revert to the correct 'resting' animation (e.g. stand or hover) after finishing their movement. This also fixes judder after an avatar has finished "go here"/autopilot movement in a viewer.
...
This meant reseting the SP.AgentControlFlags since the Animator uses these to determine the correct default animation.
2011-08-11 01:56:42 +01:00
951ffad81e
If SP.MoveToTarget has been called with a force walk, begin by landing the avatar.
...
There is a bug here - once an avatar has landed it glides to its new position instead of performing a walk animation
2011-08-11 00:23:54 +01:00
7f499ff3f3
Add a OS_NPC_LAND_AT_TARGET option to osMoveToTarget()
...
Default for this function is now not to automatically land.
This allows better control by scripts when an avatar is going to be landing on a prim rather than the ground.
Stopping the avatar involves faking a collision, to avoid the pid controller making it overshoot.
A better approach would be to gradually slow the avatar as we near the target
2011-08-10 23:56:19 +01:00
fb92678b83
fly and no fly constants for osNpcMoveToTarget()
2011-08-10 22:34:42 +01:00
5d6c9644fa
early code to allow scripts to force npcs not to fly when moving to target
...
this is to allow walking on prims. it will be up to the script writer to be sure that there is a continuous path.
currently implemented in osNpcMoveToTarget(), but none of this is final.
2011-08-10 01:47:37 +01:00
4cb8d6379d
Stop trying to deregister caps or close child agents when an NPC is removed
2011-08-10 00:59:31 +01:00
195c1dc9b8
implement osNpcStopMoveTo() to cancel any current move target
2011-08-10 00:26:38 +01:00
cba54090c7
When an NPC appearance is loaded, rez the attachments too
2011-08-09 23:25:52 +01:00
92e96d394a
When an NPC is created, stop telling neighbouring regions to expect a child agent
2011-08-09 23:11:07 +01:00
795c8e6c22
Add osOwnerSaveAppearance() to help with setting up NPC appearances. Not yet ready for user use.
...
Adds regression test.
2011-08-09 22:05:47 +01:00
e869eeb0bf
Implement first draft functions for saving and loading NPC appearance from storage.
...
This works by serializing and deserializing NPC AvatarAppearance to a notecard in the prim inventory and making the required baked textures permanent.
By using notecards, we avoid lots of awkward, technical and user-unfriendly issues concerning retaining asset references and creating a new asset type.
Notecards also allow different appearances to be swapped and manipulated easily.
This also allows stored NPC appearances to work transparently with OARs/IARs since the UUID scan will pick up and store the necessary references from the notecard text.
This works in my basic test but is not at all ready for user use or bug reporting yet.
2011-08-09 03:51:34 +01:00
3e16a0fbdd
factor out common notecard caching code from 3 methods.
2011-08-09 00:12:41 +01:00
78d8ce3816
refactor: split out generic parts of osMakeNotecard() into a separate. Add method doc. Other minor tidies.
2011-08-08 23:22:47 +01:00
6878049952
get rid of bogus log message
2011-08-06 03:06:05 +01:00
eec54adac5
remove some obsolete tests that are now done elsewhere
2011-08-06 02:38:38 +01:00
e37f8cf902
Add a test to check that ScenePresence and circuit go away when a root agent is closed down
2011-08-06 02:27:25 +01:00
85e07c78fb
refactor: Change SceneHelpers.AddClient() to AddScenePresence().
...
This seems to make more sense as we can get SP.ControllingClient
2011-08-06 02:17:41 +01:00
83ba35a26b
rip out sog generation methods in ScenePresenceAgentTests and use SceneHelpers instead
...
Not that it matters, since these tests are pretty bogus anyway.
Also, renames some test classes for consistency.
2011-08-06 02:01:25 +01:00
2b26d2f1a5
prevent "create region" console command from being able to create a region with the same id as one that already exists.
...
Addresses http://opensimulator.org/mantis/view.php?id=5617
2011-08-06 01:35:01 +01:00
76f46b2545
Do proper locking of m_localScenes list in SceneManager
2011-08-06 01:15:49 +01:00
dad1d6df18
rename TestHelper => TestHelpers for consistency
2011-08-06 00:31:03 +01:00
bda1a4be45
rename test SceneSetupHelpers -> SceneHelpers for consistency
2011-08-06 00:26:37 +01:00
cba40de109
extend phantom flag regression test to toggle back off
2011-08-06 00:22:14 +01:00
c6c91e6599
refactor: Fold most SOP.ScriptSet* methods back into script code. Simplify.
2011-08-06 00:13:08 +01:00
ba89fc3aa1
Add regression test for setting phantom status on a scene object. This is not yet complete.
2011-08-05 23:42:05 +01:00
f18780d0e3
Get "show region" command in GridService to show grid co-ordinates rather than meters co-ord.
...
This makes it consistent with "show regions"
Addresses http://opensimulator.org/mantis/view.php?id=5619
2011-08-05 22:56:53 +01:00
82f41fdcb5
BulletSim: fix problem with not convex hulling large objects by creating unit meshes and always scaling in Bullet
2011-08-05 14:53:39 -07:00
7d35bf8193
refactor: remove a sliver of unnecessary code
2011-08-05 22:45:42 +01:00
1a2518d19b
Instead of moving the file to its final place when FlotsamCache writes to disk, copy it instead.
...
This is to eliminate IOException where two threads compete to cache the same file.
2011-08-05 19:57:47 +01:00
c3f579046c
Merge branch 'master' into bulletsim
2011-08-05 11:13:02 -07:00
7640b5abf6
BulletSim: Parameters settable from ini file. Linksets. Physical property value tuning
2011-08-05 11:01:27 -07:00
94d496cf2b
remove the largely unused copy/pasted HandleAgentRequestSit() method
2011-08-05 00:57:43 +01:00
1918402cb1
if an NPC target is set to a ground location, then automatically land them when they get there.
...
This doesn't help where the target is a prim surface. In these situations, it might be better to provide manual overrides so the script can control whethre an avatar flys there/lands, etc.
2011-08-04 03:08:35 +01:00
54ce029342
if an NPC move to target is above the terrain then make it fly to destination
2011-08-04 02:31:40 +01:00
f999acd095
minor: remove some mono compiler warnings
2011-08-04 01:46:34 +01:00
c678b75d65
if a move to target is set underground, constrain it to the terrain height
2011-08-04 01:45:56 +01:00
61a931490d
move bAllowUpdateMoveToPosition switch outside of HandleMoveToTargetUpdate()
2011-08-04 01:30:37 +01:00
831f933ce6
only call move target code in SP.HandleAgentUpdate() if we're actually in the process of moving to a position
2011-08-04 01:22:01 +01:00
7b2b47530e
move reset code out of HandleMoveToTargetUpdate() so that we only call it where needed instead of passing in a flag
2011-08-04 01:16:24 +01:00
fc64cc2439
Make SIGNIFICANT_MOVEMENT SP constant a top-level property so that other classes can use it.
2011-08-04 01:05:43 +01:00
7f6f100c5a
When the NPC reaches within the SIGNIFICANT_CLIENT_MOVEMENT distance of the target, move it directly to the target.
...
This makes the movement exact. Regression test changed to check avatar reaches exact target.
Also has the nice side effect of making NPC animations continue to work after the first movement (which wasn't working). However, avatar still pauses in mid-stride
2011-08-04 01:00:33 +01:00
ba0c65e028
extend npc move test to check a second movement
2011-08-04 00:25:51 +01:00
6f913e8caf
eliminate pre-existing unused SP.StopMovement()
2011-08-04 00:13:27 +01:00
a2f5b4ac9a
Rename HandleMoveToPositionUpdate() to HandleMoveToTargetUpdate() for consistency. Improve method doc.
2011-08-04 00:10:53 +01:00
0299cb060e
eliminate a reset position flag by using functionally equivalent DCFlagKeyPressed
2011-08-04 00:06:01 +01:00
6ab01b338f
Stop calling the SP.ResetMoveToTarget() code if a target is not actually set
2011-08-03 23:59:13 +01:00
31fb6b2d72
remove move to duck walk compensation - no longer required.
...
extends npc move to regression test to check stop after sufficient sim updates
2011-08-03 23:40:05 +01:00
61d49d4f63
rename NPC.Autopilot to NPC.MoveToTarget internally. Add method doc to INPCModule
2011-08-03 23:20:36 +01:00
31cea17f8e
extend move test to check avatar is moving in the right direction after setting a move target
2011-08-03 23:13:52 +01:00
21d8a6b0e8
extend move test to check one beat of the simulator without actually asking the npc to move.
2011-08-03 23:06:18 +01:00
d78fe44191
Add passing but incomplete NPC move regression test
2011-08-03 22:51:46 +01:00
e0503d397c
stop avatar service being set up in NPC TestCreate() - it's no longer used
2011-08-03 22:45:43 +01:00
a333c60f28
refactor: rename the move to position methods to move to target to be consistent with terminology used by scene object part and elsewhere
2011-08-03 22:34:05 +01:00
2964467708
get rid of vestigal move to parameters
2011-08-03 22:11:05 +01:00
b7a3f36c65
enable the NPC module for its regression test
2011-08-03 04:48:47 +01:00
797def8aa4
Put config to enable disable [NPC] module.
...
Default is disabled. You will need to explicitly enable to toy with this.
2011-08-03 04:33:45 +01:00
6e4ec29722
Do a partial fix/implementation of OSSL osNpcMoveTo()
...
Avatar moves and stops. However, will stop in mid stride.
And if the move to position is in the air, avatar will continue to make vain and quite hilarious attempts to take off (but never doing so).
Clearly more work is needed.
2011-08-03 04:19:19 +01:00
68a5fe0431
Improve z axis move to/autopilot so the avatar does alternative crouch/huzzah when walking along the ground
...
Moving a flying avatar to a ground point doesn't yet land the avatar. This may or may not be the best thing
2011-08-03 02:59:49 +01:00
30e816bfa2
Implement move to/autopilot for z axis movement as well.
...
This is jerky (an artifact of the way it's being done, I think), but it's better than on implementation.
2011-08-03 02:04:38 +01:00
0c23764ce2
get autopilot/go here to work immediately.
...
This works with viewer 1.23.5 and so in theory should work with libopenmetaverse.
2011-08-03 01:12:32 +01:00
1c126e6e22
refactor: Move update_movement_flag and the final check inside the m_allowMovement if in HandleAgentUpdate() since it's logically only ever used there
2011-08-03 00:55:52 +01:00
f9689f5cc9
refactor: move out code from HandleAgentUpdate() which processes updates to move to a set position
...
Also comment out the really spammy log message I accidentally left in on the last commit.
2011-08-03 00:46:46 +01:00
74b23210a7
Fix Flotsam cache so it will use the disk cache if the memory cache is enabled
2011-08-02 23:44:40 +01:00
c122489e09
Partially fix autopilot/go here
...
This now works again except that it requires a click or avatar mvmt to get going
This is because the ScenePresence.HandleAgentUpdate() method doesn't trigger until the client does something significant, at which point autopilot takes over.
Even clicking is enough to trigger.
This will be improved presently.
2011-08-02 23:41:12 +01:00
b7f81d3492
If GetRegionByName can't match something in the local db, then search the hypergrid if that functionality has been enabled.
...
This should fix the problem today where old style HG addresses (e.g. "hg.osgrid.org:80:Vue-6400") stopped working since 8c3eb324c4
2011-08-02 01:06:32 +01:00
d2220da205
remove ancient late 2008 cruft that handles the situation where the GetRegionsByName used to not be implemented/returned null.
...
It's impossible that anybody is still running this since the infrastructure has changed massively since that time.
2011-08-02 00:58:08 +01:00
17e9d61f43
Change GridService.GetRegionByName() to only return info if there is an exact region name match, unlike GetRegionsByName()
...
This should fix the first part of http://opensimulator.org/mantis/view.php?id=5606 , and maybe 5605.
Thanks to Melanie for helping with this.
2011-08-02 00:52:48 +01:00
e6fb9d74ef
Revert "In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code."
...
This reverts commit 8d33a2eaa1
2011-08-02 00:40:23 +01:00
8d33a2eaa1
In GridService, have GetRegionByName() call GetRegionsByName() with a max return of 1 instead of duplicating code.
...
This also fixes the problem where this method would not return a hypergrid region, unlike GetRegionsByName()
2011-08-02 00:26:17 +01:00
b6ac1c46cd
Get rid of AvatarAppearance.Owner to simplify the code.
...
This is not used for anything - appearances are always properties of objects with ids (ScenePresence, AgentCircuitData) and just has the potential to get out of sync when the appearance is cloned.
2011-08-02 00:13:04 +01:00
59f548cda8
Get osNpcCreate appearance working with avatars that are currently in the scene.
...
Had to stop using AvatarService for now since it doesn't store baked texture IDs (which is why this was failing).
Also failing because cloning appearance was also cloning the AvatarApperance.Owner field, which we weren't then changing.
Extended TestCreate() to check this.
2011-08-01 23:41:29 +01:00
05e94ff27e
Move common gemo/agent map name code into CreateGeom()
...
Fix build break.
2011-08-01 07:04:13 +01:00
f9d6a91252
Instead of preserving old name in geom_name_map in change size or shape, use the Name property instead.
...
This is equivalent since the prim 'name' is never changed. In fact, this propery is never used for prims
2011-08-01 06:52:52 +01:00
40a78db182
comment out unused code in OdeScene.TriCallback()
2011-08-01 06:47:45 +01:00
ccb4b76242
On geom removal, remove the name from the OdeScene.geom_name_map too
2011-08-01 06:40:29 +01:00
f79df6f43f
remove the unused ODEPrim.prev_geom field
2011-08-01 06:35:59 +01:00
f32dbef647
When an ODE geom is removed (as when a non-phantom prim is deleted, resized or shape changed, also remove the OdeScene.actor_name_map entry pointing to the phys actor
...
This is to stop a small memory leak over time when prims are deleted or phantom-toggled
2011-08-01 06:32:30 +01:00
6618948ff9
refactor: centralize prim geom removal code from four places to one
2011-08-01 06:15:02 +01:00
509200d5cd
minor: add note to RemovePrimThreadLocked() to the effect that it contrary to the summary, it is being called from within Simulate() lock (OdeLock)
2011-08-01 05:48:27 +01:00
dfa2f7d715
If a prim changes size or shape, add actor to _parent_scene.actor_name_map with new prim_geom key, as the old one becomes invalid.
...
This resolves http://opensimulator.org/mantis/view.php?id=5603 where changing size or shape would stop collision_start being fired in a running script.
In both this and existing code we are not removing old actors from actor_name_map when the existing prim_geom is removed, which leads to a small memory leak over time.
This needs to be fixed.
2011-08-01 05:43:04 +01:00
2102964826
minor: indentation correction
2011-08-01 05:14:16 +01:00
b757583662
Comment out SOP logging message I accidentally left in
2011-07-31 03:41:35 +01:00
aea7007533
refactor: split out ninja joint part of SOP.DoPhysicsPropertyUpdate() so that we don't have to look at it if it's not relevant
2011-07-31 02:50:50 +01:00
450bdb3657
In the packetpool, if we encounter a data block that somehow wasn't retrieved via GetDataBlock() then create a new stack instead of throwing an exception
2011-07-31 02:30:40 +01:00
d041276517
Remove _mesh field since the mesh data no longer needs to be stored after it's initially used.
...
This may improve memory usage for regions using mesh and sculpts, though I suspect that it doesn't address the current memory leak.
2011-07-31 01:03:52 +01:00
bd8f538f80
refactor: Remove argument to pass in an initial mesh to OdePrim since this is no longer required and it prevents removal of the _mesh field (which is only used temporarily)
...
If passing in a mesh becomes important again in the future then this can be reinstated.
2011-07-31 00:49:49 +01:00
196a774b24
minor: correct method doc for last commit
2011-07-31 00:45:20 +01:00
454312f5bc
refactor: rename CreateGeom _mesh argument to mesh, so as to not confuse this with the pre-existing _mesh field
2011-07-31 00:44:23 +01:00
f1ce17071d
minor: method doc
2011-07-31 00:43:02 +01:00
e08be91c84
Refactor: Replace instances of m_isphysical with IsPhysical rather than have some code reference the private var and other the public var without any functionality difference.
...
Add some method doc to IsPhysical
2011-07-30 23:44:47 +01:00
4f4d080461
refactor: Rename ODEPrim.ParentPrim() to AddChildPrim() for code readability
2011-07-30 23:20:43 +01:00
49a3740ee9
minor: remove mono compiler warnings, some code spacing adjustments
2011-07-30 03:56:29 +01:00
9fc59e2bf2
minor: remove some mono compiler warnings
2011-07-30 03:19:00 +01:00
d917010433
minor: Add method doc to collision subscription methods. Change method case to reflect OpenSim standards.
2011-07-30 03:11:36 +01:00
310a685220
refactor: extract method that generates a physics mesh from prim shape data
2011-07-30 02:34:50 +01:00
4197f66052
refactor: extract code which generate points and faces from sculpt data into it's own method.
...
fix build break.
2011-07-30 02:22:05 +01:00
b0eacadeb4
fix bug in previous commit
2011-07-30 02:09:17 +01:00
122e01949d
refactor: move the code that generates physics meshs from prim mesh data into a separate method, in order to make the code more readable.
2011-07-30 02:08:32 +01:00
7791c1fd1e
Replace the generic exception logging in flotsam asset cache with more specific stuff to return more information.
2011-07-30 01:35:22 +01:00
c4c6b457c3
correct misleading "fcache status" text - deep scans are not performed when this command is invoked.
2011-07-30 01:16:10 +01:00
2f5995f5c0
Temporary code to change bad AvatarHeight values in the AvatarService to the default Ruth height.
...
I was persuaded to do this because simulators on osgrid will persist in inserting bad values for an unknown length of time, even after the original simulator bug which was inserting bad values is out in an osgrid distro
This code can be removed at some point in the future, though I think there is an argument for having services police these values in open grids.
2011-07-30 00:58:17 +01:00
6d866ba6d5
Temporarily put in a log line which shows which locale the user is running in.
2011-07-29 23:43:35 +01:00
9a5e0ede7c
For all Util.FireAndForget invocations, set thread to en_US before continuing wtih the invocation.
...
This is to avoid bugs where the locale is not manually set on the thread and bad data values get sent to the database or over the wire.
Lots of code does this manually but as we've seen, a subtle change can hit code which has forgotton to do this.
Since en_US show be used throughout the server at present, setting it at FireAndForget seems reasonable.
Arguably, it would be better to do this where data is sent, but doing it here is much easier.
All the manual BeginInvokes() remaining in the code should probably call FireAndForget instead.
2011-07-29 23:21:57 +01:00
84c68c61bd
When we start the appearance saving thread, make sure we set the culture to En_US so that a different culture doesn't save values with commas as decimal points, etc.
...
This will hopefully stop giants stalking the grid.
See http://opensimulator.org/mantis/view.php?id=5614
2011-07-29 22:27:04 +01:00
5043be13fb
Return null from CreateMeshFromPrimMesher if OpenJPEG decoding of the sculpt data fails.
...
This is to address http://opensimulator.org/mantis/view.php?id=5612
2011-07-29 21:49:23 +01:00
f3c5a5b745
fix extremely minor Ode bug where the _taintedPrimL list would always be cleared on every OdeScene.Simulate() even if it was already empty.
2011-07-29 01:18:42 +01:00
2a39d0cdb0
refactor: Move another chunk of ninja code out of the OdeScene.Simulate() loop for consistency and readability.
2011-07-29 00:51:07 +01:00
3f0d8f3cbf
refactor: Simplify reading OdeScene.Simulate() loop by shunting all the NINJA joints stuff into its own method.
...
Now if ninja joints isn't active (which is the default) don't have to wade through a lot of massively indented irrelevant code.
2011-07-29 00:39:02 +01:00
9c6227da66
refactor: unindent the OdeScene.Simulate() loop to ignore the long commented out ifs and locks
...
This is to make it more readable.
2011-07-29 00:23:42 +01:00
8c3eb324c4
When using osTeleportAgent() and osTeleportAvatar(), only teleport if the region name exactly matches (not near matches)
...
This is to prevent situations where the first name returned by GridService.GetRegionsByName is not one that exactly matches the given region name, even when there is an exact match later on in the list.
Only the above two functions call this teleport method (the map uses a different routine) so this seems safe to change.
Addresses http://opensimulator.org/mantis/view.php?id=5606
2011-07-29 00:00:35 +01:00
c4ffcd4b7d
Ensure that packet headers get parsed correctly
2011-07-27 09:12:00 +01:00
4cdc8806fb
Fix LLTextBox to work with the updated libOMV
2011-07-23 11:40:38 +01:00
504de8bc47
Pass the first name and last name from the agent circuit data to the authorization service rather than from the account.
...
This is to accomodate situations where the authorization service is being used by the hypergrid, where visitors have no user account.
See http://opensimulator.org/mantis/view.php?id=5517 , this code is somewhat adapted/cleaned up from Michelle's patch
I'm a little ambivalent about this since visitors could put anything in firstname/lastname so it's not much of an auth measure.
It's up to the auth service to decide which data it actually uses.
Possibly we should be passing through other info such as agent circuit ip
2011-07-23 03:48:53 +01:00
4eaca4884e
Fixed serverside_object_permission default value confliction
2011-07-23 02:26:13 +01:00
be9b4ad23a
For default everyone permissions on library items, make notecards and scripts non-modifiable (but still copyable, etc).
...
Users should not be given the impression that they can modify these items.
This still does not solve the issue where library items cannot be dragged into prims or user inventory any time after they are initially seen.
Curiously, manually copying and pasting still appears to work.
On the surface, this seems to have something to do with library item caching on the client, since deleting the cache allows drag to work again once
Not sure what the exact problem is.
2011-07-23 02:18:23 +01:00
f0895028e9
Remove manually permissions settings on all current library items so that they use the defaults instead.
...
Some items had completely wrong permissions - this is easier than correcting them all.
The ability to set permissions in xml is retained since there are use cases for this (e.g. to create no-mod library scripts)
2011-07-23 02:13:11 +01:00
fcaa4f6012
Revert "Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default)."
...
There actually are uses for this. I will correct the perms instead since some entries appear to be wrong.
This reverts commit 667b54f5a2
2011-07-23 02:05:51 +01:00
667b54f5a2
Don't load current/next/everyone/base permissions from the library item xml files - always use PermissionMask.All instead (which was the existing default).
...
Library items always need the same permissions, so it doesn't make sense to load them from the xml files. This just opens the door to permissions mistakes.
2011-07-23 01:59:14 +01:00
869883f2dc
BulletSim: fix buoyancy for prims. Start of configurable physics parameters.
2011-07-22 15:23:57 -07:00
aadc4eb3b8
Fix problem where sculpts were not getting physical proxies
...
Fixed this by inspecting Shape.SculptEntry at various places instead of Shape.SculptType. Sculpties actually have a SculptType of Cylinder - only true mesh is SculptType.Mesh
This addresses http://opensimulator.org/mantis/view.php?id=5595
2011-07-22 19:23:38 +01:00
5ffec1cd64
Pass collisions and updates in pinned memory (saves marshaling).
...
Fix folding feet by using collision normals.
Add constraint specification.
2011-07-22 10:23:40 -07:00
4cbc912375
Merge branch 'master' into bulletsim
2011-07-22 09:02:32 -07:00
6ac0bc7259
Thank you, Michelle Argus, for a patch that adds reading the agent limit
...
from XML properly.
2011-07-22 12:36:05 +01:00
02e54c57c4
Generate the initial maptile asynchronously
...
Signed-off-by: Melanie <melanie@t-data.com>
2011-07-22 09:52:21 +01:00
d8228f4374
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-07-21 21:12:50 +01:00
71ef4a8fb3
When an uncached asset is requested multiple times concurrently, only load it once
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:52:56 +01:00
56830bfe07
When handling SetAppearance packet, always save the appearance; not only if the texture was changed
2011-07-21 20:18:36 +01:00
f97278610c
Fixed updating avatar appearance
...
Signed-off-by: root <root@grid00001.t-data.com>
2011-07-21 20:13:32 +01:00
2c11f7fc38
Merge branch 'master' into bulletsim
2011-07-20 15:01:32 -07:00
3270bd560e
Removed unused AddPrimShape methods in PhysicsScene caused by merge conflicts
2011-07-20 14:34:02 -07:00
9fc7d65df7
Apply the localID to the Physics actor to prevent null calls later
2011-07-19 18:26:36 +01:00
51c47677a1
Tidy up a superfluous AddPrimShape override in PhysicsScene
2011-07-19 18:17:19 +01:00
ee829a71c2
On all undo/redo operations, consistently lock the undo object for everything, in order to avoid any deadlock issues.
2011-07-19 06:13:05 +01:00
c50533659a
If we store an undo, wipe anything already present on the redo stack
...
This stops problems when we undo a few steps and start off down another path.
Surprisingly, apart from this now fixed problem, redo appears to be working too.
2011-07-19 06:11:16 +01:00
ec1ecd3633
stop redo throwing an exception if there is nothing to redo
2011-07-19 06:05:23 +01:00
25c532f2ec
refator: simplify UndoState.Compare() code
2011-07-19 05:58:52 +01:00
9dd5a24495
rip out pointless null checks in UndoState where part can never be null
2011-07-19 05:51:19 +01:00
bc3679b67d
Fix undo when changing just the root prim's position in a linkset.
...
I think (ha ha) this largely fixes undo, except for the fact that rotation a set of prims with 'edit linked parts' selected doesn't quite work properly (though this works fine if the checkbox isn't selected).
Also, the double undo bug for resize is still present.
Redo might be incredibly buggy, haven't even looked at that yet.
2011-07-19 05:46:17 +01:00
0ef29da9b2
refactor: rename UpdatePrimPosition() to UpdatePrimGroupPosition() for consistency
2011-07-19 05:20:04 +01:00
62325829ec
comment out all kinds of debugging guff
2011-07-19 05:14:58 +01:00
1fdb16f1cd
Fix undo for rotation of the root prim in a linkset on its own.
...
The only obviously broken things right now are the undo of the position of just a root prim (stays in place) and the fact that resizes need two undoes.
2011-07-19 05:05:50 +01:00
b2722e984a
Fix undo of rotation of single prims in a linkset
2011-07-19 04:40:02 +01:00
97f1edfd95
Fix undo of prim group rotation.
...
This isn't that great since I think I broke it a few commits earlier.
Undo of rotation of individual prims in a linkset is still broken
2011-07-19 04:15:27 +01:00
4b9ef4f39c
Rename UpdatePrimRotation() to UpdatePrimGroupRotation() since this is what it actually does and is more consistent with other method names.
2011-07-19 03:44:49 +01:00
7c468cda36
Stop undo of just the root prim position in the linkset from shifting the whole linkset.
...
However, what happens now is that undo just doesn't do anything when the root prim is selected on its own. This requires more code than just fiddling with undo states.
2011-07-19 03:38:22 +01:00
c94dc95844
fix undo when resizing of non-root individual prims in a linkset
...
undo resize, rotation and position still needs fixing when only editing root prim of a linkset
2011-07-19 03:27:16 +01:00
430a4aeba8
Fix undo for resizing linksets
...
This involves implementing a boolean in UndoState to signal whether the undo needs to be done for an entire group/linkset or just a single prim
Resizing individual components of linksets is still dodgy.
Resizing still has to be down twice, since for some reason the client is sending two multiobjectupdate packets on every resize except the very first. This applies to single prims and linksets. Need to look into this.
2011-07-19 03:01:54 +01:00
86f45f6fe7
remove undo state storage in a few places where it's pointless
...
no functional effect - existing bugs still remain
2011-07-19 01:24:43 +01:00
6fc74b36d1
Make various tweaks to undo code in an effort to get things working better.
...
Undo rotation and position appear to be working.
Resizing a single prim appears to be working, though the undo has to be done twice.
Resizing a group of prims still does not work properly - possibly because in the UndoState we don't store a knowledge of when we're resizing a whole group rather than individual prims.
This needs to be addressed.
2011-07-18 04:54:21 +01:00
aec3b58a57
use standard sdk stack in terrain model rather than OpenSim.Framework.UndoStack.
...
remove OpenSim.Framework.UndoStack
2011-07-18 02:06:06 +01:00
3f8e571b78
Use a standard generic system stack for the undo/redo stacks instead of our own homebrew.
...
system stack also uses an array, so no performance penalty.
Also exposes undo count and adds a test assertion for correct undo count after resize
2011-07-18 02:01:12 +01:00
bdd340b9fc
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-07-18 01:35:00 +01:00
e9a739f45f
refactor: group all the undo/redo code in SOP into one place for easier code reading
2011-07-18 01:33:57 +01:00
dd2564d7ec
refactor: Pull up Assembly of the SQLite classes as a protected property, so that it can be overwritten in subclasses. That way extensions can decide in which assembly migration resources should be looked up. This is a refactor similar to commit 9923a2ff10 for MySQL -- no functional changes.
2011-07-16 09:49:38 +02:00
f5ddf37112
Replace ifs in SOG.GroupResize() with Math.Min()
...
Also fiddle a bit with undo. This is not currently working properly, though to be fair it also didn't appear to work in 0.7.1.1 either (at least for resize).
Will get some more attention soon.
2011-07-16 05:23:21 +01:00
9a80adf33a
remove now unncessary parts of SceneObjectGroup.Resize()
2011-07-16 04:49:21 +01:00
122745fe1c
refactor: replace scale limiting code with more elegant Math.Min calls
2011-07-16 04:28:49 +01:00
2b68ac4ba3
refactor: Push all part resize code down into SceneObjectPart.Resize()
2011-07-16 04:22:57 +01:00
4b5a6b655b
add test for resizing one part in a group
2011-07-16 03:52:30 +01:00
df2a59d31b
refactor: make SceneObjectGroup.GroupScale() a property rather than a mehod
2011-07-16 03:30:14 +01:00
0f9882db5b
minor: add a log warning if a sculpt/mesh async asset request returns no data
2011-07-16 03:24:36 +01:00
6f9b855719
refactor: remove pointless sender != null tests, etc, in AssetReceived, since the method called always belongs to the object that generated the request
2011-07-16 03:16:24 +01:00
982e71b6b8
eliminate unused and redundant SceneObjectGroup.AssetReceived()
2011-07-16 03:08:28 +01:00
c82f19e41c
fix build break from last commit
2011-07-16 03:06:30 +01:00
3fc12e7224
Eliminate the pointless textured id argument to SculptTextureCallback
2011-07-16 03:02:28 +01:00
2b339b7d2b
minor: remove mono compiler warnings
2011-07-16 02:56:54 +01:00
27fae36a21
remove the need to supply SceneObjectGroup.GroupResize() with a localId.
...
This is utterly pointless scene we already know which sog we're dealing with.
2011-07-16 02:53:36 +01:00
50bd48542c
Add very basic test for resizing a scene object with one prim
2011-07-16 02:44:00 +01:00
6179879308
minor: remove mono compiler warnings
2011-07-16 01:53:25 +01:00
da7340b9fb
If resized shape is a mesh/sculpt, leave it to the mesh asset callback to trigger the physics actor taint.
...
In the last commit, the fix was made by updating all the child prim physics actors with the new size rather than just the root part.
2011-07-16 01:42:56 +01:00
18652eb87e
Fix physics proxy regeneration when a mesh with more than one submesh is resized
...
Addresses http://opensimulator.org/mantis/view.php?id=5584
2011-07-16 01:36:27 +01:00
7247ca1644
use constants in llGetObjectDetails() rather than magic numbers
2011-07-16 00:08:11 +01:00
a9ba9d4a9e
change async parameter name in AddLocalPacketHandler since it becomes a reserved keyword in .net 5
...
Also adds some method doc.
2011-07-15 23:51:55 +01:00
0ee7a5ee81
If object is an attachment, make llGetVel() return the avatar's speed rather than the object's own zero speed.
...
As per http://opensimulator.org/mantis/view.php?id=5575
2011-07-15 23:36:32 +01:00
3e5b2d52ff
minor: method doc for baked texture uploading
2011-07-15 22:58:29 +01:00
e9dbe54ab1
Fix some local id issues in physics glue
2011-07-15 20:07:59 +01:00
b55076990c
fix duplication of physical objects for physics engines that care about the initial value of localID
2011-07-15 11:37:34 -07:00
c7e8529122
minor: remove whitespace
2011-07-13 01:25:17 +01:00
0d64155bb5
Remove an unused 404 checker since on a 404, GetResponse() throws a WebException rather than proceeding.
2011-07-13 01:24:22 +01:00
938b4f8bf8
if a SynchronousRestObjectRequester request fails, then unless it's due to a 404, log the exception for diagnostic purposes
...
This is instead of logging "Invalid XML" for all failures, even if they weren't a result of invalid xml.
A default TReponse is returned in the event of a 404, which is the same behaviour as previously.
2011-07-13 01:19:12 +01:00
e434ba5e8e
Remove the obsoleted SynchronousRestObjectPoster
2011-07-13 00:52:32 +01:00
08dc07dc76
refactor: Move all callers of the obsoleted SychronousRestObjectPoster.BeginPostObject() to the identical SynchronousRestObjectRequester.MakeRequest()
2011-07-13 00:48:36 +01:00
5158ec0913
Add experimental module to check status of services that the simulator is connected to.
...
Currently disabled.
2011-07-13 00:24:55 +01:00
bf1b8397bb
Add a warning to URI config in GridCommon.ini.example not to add a slash to the end.
...
Tidy up GridCommon.ini.example
2011-07-12 23:35:06 +01:00
3e456163dd
Port implementation of llCastRay() from Aurora.
...
I haven't been able to test this since the viewer won't parse the llCastRay() function. Maybe some activation cap is missing. Could wait until it is activated by default in the viewer.
2011-07-12 22:13:15 +01:00
d31e0a67f7
temporarily fix the build break with building the OdePlugin tests assembly.
...
This needs to be fixed properly.
2011-07-12 03:26:22 +01:00
f75f906e35
minor: remove whitespace to trigger another build
2011-07-12 03:13:05 +01:00
df0e5cc9fe
When a mesh object is added to a scene, delay adding the physics actor until the sculpt data has been added to the shape (possibly via an async asset service request)
...
This prevents spurious 'no asset data' for meshes added on startup.
2011-07-12 02:33:09 +01:00
dbd954d701
Fix permissions problem where newly uploaded meshes rezzed from inventory could not be copied by owner.
2011-07-11 22:56:14 +01:00
b9cbe92f30
Merge branch 'master' into bulletsim
2011-07-11 12:23:20 -07:00
24efb021ff
minor Tack the prim name on the end of the "experimental mesh proxy generation" message.
...
Can probably comment out this message soon, once a few other issues are tidied up.
2011-07-11 04:23:30 +01:00
8e44a8e2b9
Properly regenerate physics proxy when a mesh is resized.
...
This is done in SOP.Resize(). More common code from callers needs to be refactored into this method to reduce confusing copy/pasting
2011-07-11 03:47:49 +01:00
0badf3718d
refactor: push the part of SceneObjectGroup.CheckSculptAndLoad() that actually deals with the part into a SceneObjectPart.CheckSculptAndLoad() method
2011-07-11 03:35:29 +01:00
2f3d0e209f
When a sculpt/mesh texture is received by a part on a callback request, don't do the unnecessary work of copying the base shape.
...
Just setting the new base shape is enough to reinsert the sculpt data and set the taint.
Also cleans up a few more left-in debugging messages.
2011-07-11 03:13:59 +01:00
ce85675e70
comment out accidential ProcessTaints physics debug line left in code
2011-07-11 02:29:51 +01:00
6a15464b0a
refactor: Make arguments to SceneGraph.UpdatePrimFlags() more readable
2011-07-11 02:29:19 +01:00
01b98c2e62
refactor: Make arguments for SceneObjectGroup.UpdatePrimFlags() more readable
2011-07-11 02:18:19 +01:00
e68ae44b6b
minor: remove mono compiler warning
2011-07-11 02:11:37 +01:00
c6d4304a04
refactor: very minor space insertion
2011-07-11 02:11:16 +01:00
c964114f7e
refactor: make argument to SOP.UpdatePrimFlags() more readable
2011-07-11 02:09:11 +01:00
457ba9d1a2
refactor: slightly simplify test
2011-07-09 02:27:47 +01:00
59aedbc94b
Rename SceneSetupHelpers.AddRootAgent to AddClient() to better represent its effects and return object
2011-07-09 02:25:40 +01:00
f99b89990c
Add scratch AvatarFactoryModuleTests with one test to do a partial check on AvatarFactoryModule.SetAppearance()
...
Baked texture set not yet checked, nor persistence of data in avatar service
This is a foundation for later npc related tests.
2011-07-09 02:21:56 +01:00
6963b8b046
refactor: Get LSLString(LSLInteger i) constructor to now call LSLString(int i) structure to remove code duplication.
2011-07-09 01:28:27 +01:00
df586c9d25
Raw int numbers (ex.LSL Constants) are displayed like "1.000000" when type cast to string
2011-07-09 01:27:12 +01:00
f680c13495
Fix osMatchString() so that it reports all instance of pattern matches, not just the first one.
...
This is a slight adaptation of the patch in http://opensimulator.org/mantis/view.php?id=4568 which doesn't apply directly since the underlying code was changed by earlier makopoppo patches.
Thanks makopoppo!
2011-07-09 01:24:30 +01:00
52c3671aa0
fix formatting issues from last patch
2011-07-09 01:17:35 +01:00
b983f38e2a
lsGetWindlightScene() returns raw int value, which makes unable to compare to another value with llListFindList()
2011-07-09 01:08:26 +01:00
04f8d0e45d
Made some LSL_Constant or LS_Constant raw int values
2011-07-09 01:08:13 +01:00
e7abf834d1
Instance-types-in-list fix for LSL/OSSL functions. This will fix llListFindList() which always returns -1 when you compare with the list from those functions.
...
*llCSV2List
*llGetAnimationList
*llGetLinkPrimitiveParams
*llGetObjectDetails
*llGetParcelDetails
*llGetParcelPrimOwners
*llGetPrimitiveParams
*GetLinkPrimitiveParamsEx
*osGetAgents
*osMatchString
*osGetLinkPrimitiveParams
*osGetPrimitiveParams
*osGetAvatarList
2011-07-09 00:49:53 +01:00
d79c6c8820
Rename SetSculptData() to SetSculptProperties(), since this is what it does (setting SculptData is done through the property)
2011-07-09 00:42:48 +01:00
5e8900dfd0
minor: code tidy and inserted log lines for future use.
...
Unable to get to the bottom of why resizing a mesh fails to properly reset the physics proxy, when toggling phantom does
After a mesh is generated, the existing sculptdata is set to zero in PrimitiveBaseShape to save memory
When phantom is toggled, the sculptdata is regenerated before remeshing.
But on resize, the sculptdata is not regenerated.
So clearly, resetting sculptdata is possible, but haven't quite been able to pin down how this is being done when phantom is toggled.
2011-07-09 00:35:30 +01:00
c3d82bdcb1
When loading library asset set, only store an asset if it's different from an existing one with the same id.
...
We compare existing and loaded asset by doing an SHA1 on both, so that a changed library asset will still update the store.
This cuts asset library load time from 10 seconds to <1 sec.
Note, a fix on the previous commit revealed a bug where a library script cannot be copied except on the first login after a cache clear.
This is unrelated to this commit and needs to be fixed at some subsequent time.
2011-07-08 22:53:19 +01:00
a048ec3f95
stop the local inventory services connector from logging an error when an item id isn't found.
...
making this query is legitimate and so the log line can cause false positivies. It is up to callers to log an error if appropriate.
2011-07-08 22:34:03 +01:00
192bd1057e
fix bug where opening a library script would fail
2011-07-08 22:32:19 +01:00
5700c582ba
refactor: rename bool returning GetAgentInventoryItem() to CanGetAgentInventoryItem() to improve code readability
2011-07-08 22:28:17 +01:00
e8ad8593b6
refactor: eliminate redundant return statement
2011-07-08 20:58:44 +01:00
40300c886c
refactor: Factor out AddSubMesh() method from long CraeteMeshFromPrimMesher() method
...
Also remove some of the logging spam left in from the last commit.
2011-07-08 20:36:01 +01:00
b18ef976ff
Fix interpretation of physics mesh proxies from mesh data
...
As per http://wiki.secondlife.com/wiki/Mesh/Mesh_Asset_Format , some submesh blocks may just have the flag "NoGeometry" to signal that they provide no mesh data.
If a block contains this, ignore it for meshing purposes rather than suffer a ClassCastException
This fixes physics proxy meshing, so you can now walk through mesh doorways, properly stand on the trailer of mesh trucks, etc.
To get mesh physics proxy, the UseMeshiesPhysicsMesh must be true in a [Mesh] config section in OpenSim.ini (example in OpenSimDefaults.ini).
Convex hull physics not currently supported.
2011-07-08 19:43:22 +01:00
29034bc0e0
minor: code tidy up - remove a couple of Console.WriteLine() accidentally added in the last commit
2011-07-08 18:34:44 +01:00
36df9ae79a
refactor: Separate the OdeScene class into its own file from OdePlugin.cs, to improve code readability
2011-07-08 18:16:48 +01:00
1dcad4ac66
minor: commented out log lines for future use and very small code tidy
2011-07-08 17:58:01 +01:00
3bda7711b3
Switch the MeshUploadFlag CAP module on and off with the existing config AllowMeshUpload flag in [Mesh] (in OpenSimDefaults.ini)
...
Default is on.
2011-07-07 23:49:19 +01:00
2fbc98fa5c
Make MeshUploadFlagModule non-shared rather than shared (since each scene needs its own cap)
2011-07-07 23:37:23 +01:00
e91861fff2
Ensure that the max transfer distance is initialized correctly.
2011-07-07 09:12:57 -07:00
281e80ccf3
add MeshUploadFlag capability fixed mesh upload with latest mesh viewer thank you dahlia and lkalif for helping to make this happen!
2011-07-07 03:30:37 -07:00
af8773d6d0
Add TestClearCache()
2011-07-04 23:05:31 +01:00
cb02fc44f5
add TestExpireAsset()
2011-07-04 23:03:05 +01:00
f58de55c84
refactor: Move test setup code into setup method
2011-07-04 22:59:36 +01:00
bebc51a6e0
Make it possible to disable the file part of the flotsam asset cache
...
This matches the ability to disable the memory part
This is controlled through the FileCacheEnabled parameter in FlotsamCache.ini
Default is true, so existing installations are not affected.
Improved fcache command feedback when various caches are disabled.
Re-enabled test for flotsam cache with file caching disabled.
2011-07-04 22:51:47 +01:00
5dc785bbf2
refactor: Split file cache manipulation code into separate methods, as has already been done for the memory cache
2011-07-04 22:30:18 +01:00
46f5893d55
Add basic flotsam asset cache test for retrieved cached asset.
...
Disabled temporarily since file system caching disrupts subsequent test runs
2011-07-04 21:35:15 +01:00
b8e7258051
If a user has the rights to edit a parcel's properties, then also allow them always to enter that parcel.
...
This is patch http://opensimulator.org/mantis/view.php?id=5567
Thanks Snoopy!
2011-07-02 01:14:29 +01:00
bb4cb16512
Add profile, merge, noassets and skip-assets options for loading/saving oars via RemoteAdmin
...
This is http://opensimulator.org/mantis/view.php?id=5453
Thanks Michelle Argus!
2011-07-02 01:05:03 +01:00
513d63455e
Create a very basic initial test which just creates an 'npc' and tests that the scene presence exists
2011-07-02 01:01:40 +01:00
ed12e38480
refactor: simplify existing npc code by creating them directly rather than indirectly via a timer
...
no obvious reason for doing this asynchonously, especially as the caller was sleeping in order to pick up the response anyway!
2011-07-02 00:18:15 +01:00
fba961c63f
Make default serverside_object_permissions = true since this better matches user expectations.
...
It also matches the default setting in the OpenSim.ini.example file
2011-07-01 23:06:46 +01:00
e765759f50
If OpenSim has been built from a git tree, then include version information automatically by dereferencing .git/HEAD
...
A blank bin/.version file will stop this being displayed.
2011-07-01 22:48:00 +01:00
759e855566
refactor: rename gitCommitFileName to manualVersionFileName since bin/.version doesn't necessary have to be a git hash
2011-07-01 21:47:30 +01:00
e41093635a
fix build break I just introduced
2011-07-01 21:37:03 +01:00
9f72fbcb75
Add an async inventory details sender to respond to FetchInventory packets.
...
If a user with a very large inventory right-clicks on their "My Inventory" folder, viewer 1 code will send a massive number of Fetchinventory requests.
Even though each is handled asynchronously via a pool thread, the sheer frequency of requests overwhelms the pool and freezes inbound packet handling.
This change makes the first Fetchinventory thread also handle subsequent requests, freeing up the other threads.
Further efficiencies could be made by handling all the items in a particular FetchInventory request together, rather than separately.
2011-07-01 21:25:40 +01:00
5c18ebf424
Allow physics proxy generation for meshes using new asset format.
...
Fix an invalid cast exception while decoding new mesh asset format.
2011-06-29 17:36:41 -07:00
c84a1bd99f
Don't follow inventory links of links.
...
This is to avoid problems with corrupt inventories where an inventory link target points back at the source's folder
No viewer has been observed to set these up as of yet. If this ever happens, we will need a more sophisticated solution to track sent folders within the recursion
2011-06-29 01:33:41 +01:00
1b4c08730e
refactor: simplify redundant double containing folder check
2011-06-29 00:56:35 +01:00
3f0b8db0c1
If an inventory link target is in the same folder as the source, then don't recursively request that folder.
...
Currently, this should never actually happen but certainly best to handle this case
2011-06-29 00:54:53 +01:00
22f25fae38
Hack around with the NPC module to get osNpcCreate() partially working again.
...
This now creates an avatar but appearance is always cloudy.
Move doesn't work.
Really, creating an NPC should only involve a ScenePresence rather than doing anything with IClientAPI, since an NPC has no viewer to communicate with!
2011-06-29 00:28:22 +01:00
ee92f22f2a
[PATCH 2/2] [FIX] osGetPrimitiveParams() and osSetPrimitiveParams()
...
crashes throwing System.NullReferenceException
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:29 -04:00
80010f8908
[PATCH] osSetSpeed() will accept float number
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
ffa790d69d
[PATCH] Get osGetWindParam() and osSetWindParam() accessible
...
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
882d5c82b3
[PATCH 1/2] Fixed the function names of some OSSL functions shown as
...
threat-level check error message
Signed-off-by: BlueWall <jamesh@bluewallgroup.com>
2011-06-28 11:48:28 -04:00
36e2054760
minor: temporarily comment out the local status notify friends messages seen on login/logout, since it's a bit noisy on the console.
...
Please uncomment if/when this is still needed.
2011-06-27 23:12:54 +01:00
5daac0584a
Fix bug in reset user password where entering an invalid name would cause an exception. Also, convert this commands log output to console output.
...
Console output is more appropriate for console commands. The log only gets one side of the conversation anyway (since it doesn't necessarily record command inputs).
2011-06-25 00:08:14 +01:00
296774495b
Implement "set user level" console command to set the user level (which determines whether a user has a god account)
...
Adapted from Makopoppo's patch in http://opensimulator.org/mantis/view.php?id=5552 . Thanks!
2011-06-25 00:03:34 +01:00
56dcc51094
Add a command "show account <first-name> <last-Name>" to the user account service that will show the given user details
2011-06-24 23:54:37 +01:00
7545692f32
Changed actual default values of 'ServiceConnectorModule' and 'MessagingModule' in [Groups] section in accordance with OpenSim.ini.example descriptions
2011-06-24 22:40:21 +01:00
0dd3281caf
Optionally, don't delete previously compiled scripts on startup
2011-06-24 22:07:20 +01:00
afb1248e39
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-24 21:57:16 +01:00
1a0a9d2290
Implement the latest mesh mechanism so that rezzing the uploaded mesh now works again.
...
Many thanks to the aurora project for pioneering this.
This code is almost certainly not bug free, but it does at least appear to handle simple meshes (except when the viewer crashes - but it is beta!).
2011-06-24 21:54:01 +01:00
1cad116b1d
Merge branch 'master' of /home/opensim/src/opensim
2011-06-24 16:33:40 -04:00
75199a0d2c
RegionReady Module:
...
Add notification to neighbors when logins are enabled.
2011-06-24 16:20:13 -04:00
37a7c16734
minor: method documentation
2011-06-24 21:01:48 +01:00
de20f0603f
Tell hypergridders when their teleports fail because of the 4096 limit rather than just saying "destination not found"
...
Instead of performing the 4096 check when the region is linked (and subsequently removing the link), leave the link in place and perform the check in the entity transfer module
This allows us to explicitly tell the hypergridder why the teleport failed (region out of range).
It also allows people on regions that are within range (on a large source grid) to teleport.
The Check4096 config parameter in the [GridService] section is replaced by a max_distance paramter in a new [EntityTransfer] section in OpenSimDefaults.ini
Since the parameter is in OpenSimDefaults.ini no action needs to be taken unless you want to increase this limit. It could also be decreased.
The check is being made in the base entity transfer module, since I believe the viewer problem occurs both on extremely large grids and while hypergridding.
2011-06-24 19:49:05 +01:00
302d72701d
BulletSim initial checkin
2011-06-20 17:24:42 -07:00
7819b4a794
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-16 17:15:12 -07:00
409738726d
Added a couple of guards and warnings to the MapImage/MapImageServiceModule.
2011-06-16 17:14:41 -07:00
ad84728aba
Add localID to physical object creation functions.
2011-06-15 11:31:32 -07:00
29da57e380
Add the PhysActor to the correct SOP when duplicating a physical
...
prim. Thanks, MisterBlue
2011-06-15 11:26:45 -07:00
7a4fbdac7c
Added an expiring cache for region information to the
...
RemoteGridService connector. Timeout is currently set at five
minutes. Negative results are not cached.
The result is that operations like send an instant message do
not have to go through the grid service every time.
2011-06-15 11:22:51 -07:00
603dbea190
tweak messages. Make verbose inventory item save message give the item name as well as item id and asset id
2011-06-14 00:51:18 +01:00
822b9e085f
Added SimulatorFeatures capability. Thanks Aurora devs for the bootstrap on the contents of the response.
...
Changed the experimental capability introduced a couple of commits ago: now sending that extra information as part of the response in the SimulatorFeatures cap.
2011-06-13 10:21:29 -07:00
c62ccc75a1
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-13 09:14:17 -07:00
ecb28ae130
V2 map now working in grids too. WARNING: A few visible configuration variables added in order for this to work. See .ini.example changes
2011-06-13 09:13:44 -07:00
ab11835aeb
Same processing of the "/" in the MapImageService Cap as the one in the login service.
2011-06-13 07:59:28 -07:00
0e4db3ca39
Added experimental new capability URL called MapImageService meant to work with Kokua viewer if devs are willing to do it.
2011-06-13 07:56:52 -07:00
dc978d02a7
match water color for warp3d map tiler and adjust lighting
2011-06-13 12:37:43 +01:00
4b9de140ab
Add credit and link to SimianGrid project. Thanks, guys!
2011-06-12 22:25:30 -07:00
95e050130c
People are bound to forget the '/' at the end of MapTileURL, so let's correct that from the inside.
2011-06-12 22:10:16 -07:00
2e77518c6d
bit depth: 24!!! begeez! -- zoom levels work now.
2011-06-12 21:51:26 -07:00
78c16da544
A few bug fixes on map V2. Zoom level weirdness still there.
2011-06-12 17:05:45 -07:00
fd57c91b4a
First pass at making the V2 map work. Standalones only for now. There are some issues with the zoom level -- TBD.
2011-06-12 15:37:42 -07:00
06e254c392
A few more cleanups on the way to close http://opensimulator.org/mantis/view.php?id=5516 once and for all. Moral of the story: don't send AgentOnline/Offline to viewers with a zero-length array.
2011-06-11 17:48:19 -07:00
e1ca77a0db
Only send AgentOnline to the client if the friendsOnline list has elements. Also, increased the timeout on UserAgentServiceConnector, StatusNotification again.
2011-06-11 17:22:35 -07:00
d992779397
Switched order of SQL statements in Friends migration -- resulted in the wrong key
2011-06-11 09:36:57 -07:00
e07d71d298
Added a Sleep in between each site call, to slow the xml-rpc requests down.
2011-06-10 21:17:34 -07:00
5f311c91c7
More tweaking on the UserAgentServiceConnector: add constructor that does not do DNS lookup, and use that for friends notification.
2011-06-10 21:07:50 -07:00
0ae022d688
Decreased timeout of HG StatusNotification to 4secs. http://opensimulator.org/mantis/view.php?id=5516
2011-06-10 20:59:57 -07:00
487cb51f69
3rd way of reseting the HG Map. This time, don't use the grid service; instead keep track of which map blocks each client has seen in the region, and reset exactly those when the client closes.
2011-06-10 17:22:17 -07:00
9a62bfab0e
If the flotsam asset cache console command "fcache clear" is specified on its own, clear both memory and file caches
2011-06-11 00:50:20 +01:00
b13b54c526
Make the internal flotsam asset cache defaults match config-include/FlotsamCache.ini.example. Enable the flotsam console commands even if FlotsamCache.ini isn't present.
...
For the most part, defaults are made to match those already in FlotsamCache.ini.example.
The one exception is that the 48 hour file timeout from the code is used instead of the 0 hours that was in the example file. This can be tweaked if necessary.
Most importantly, the default cache directory is now ./assetcache (as in FlotsamCache.ini.example) rather than ./FlotsamAssetCache (as was the internal code default).
Therefore, if you were using flotasm without using the config file, then please rename your cache directory or start using the ini file and change the default there if you want to keep using your existing cache.
2011-06-11 00:04:21 +01:00
fc7e17baf7
When serializing objects, stop accidentally using the green text colour value for alpha
...
This addresses http://opensimulator.org/mantis/view.php?id=5111
2011-06-10 21:49:25 +01:00
c7bdb66a1f
Added missing "Old Guids=true" to ConnectionString
2011-06-10 21:10:37 +01:00
804fe2d9b0
Save the sun's position in OARs
2011-06-10 20:55:58 +01:00
08db3c5a8e
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 20:42:15 +01:00
b5518dc906
minor: Add some commented out destructor logging messages for potential future use.
...
At the moment, client and scene objects are being garbage collected as expected, at least in simple scenarios.
2011-06-10 20:40:14 +01:00
eeac2275c9
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 09:17:06 -07:00
98d1e7768a
New method for resetting the map on HG: do it only once upon changing grids, and reset only exactly the map blocks that had regions in them. WARNING: this fetches all the regions from the Grid service, so there is a chance that this is a really bad idea in large grids. Pushing it for testing.
2011-06-10 09:16:43 -07:00
387b228d68
partial update for new mesh asset format - handle both old and new formats for physics mesh
2011-06-10 00:38:38 -07:00
9149ef6c89
For MySQL, migrate region tables to the MyISAM storage engine rather than InnoDB
...
Using MyISAM proves vastly faster for persisting scene objects.
For instance, a scene object that took 9 seconds to persist before now takes 1. This also improves the experience of loading large OARs.
We don't use any of the transactional features of InnoDB.
The only thing that may have an impact is that InnoDB does row locking on inserts while MyISAM does table locking.
However, field reports say there is no noticeable difference.
2011-06-10 02:33:50 +01:00
d780500c58
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-10 02:29:30 +01:00
2bc8dcfdbd
minor: add method doc to make it clear that click action is fired when the click action is changed, not when a prim is clicked
2011-06-10 02:27:45 +01:00
8d3a8a0a81
The map breakage is actually at 2048!
2011-06-09 16:51:47 -07:00
e3e1f6308d
Change the name of the newest command to "show names" so that it doesn't conflict with the existing "show users"
2011-06-09 16:11:47 -07:00
4cf60c5d9d
Removing special casing on failures. This may also fix reports of this issue:
...
22:07:53 - [USER AGENT CONNECTOR]: remote call to http://hg.osgrid.org:80/ returned an error: Requested method [locate_user] from 127.0.0.1 threw exception: Object reference not set to an instance of an object at OpenSim.Services.HypergridService.UserAgentService.LocateUser (UUID userID) [0x00000] in <filename unknown>:0
2011-06-08 19:51:48 -07:00
49e4e53928
Consistency fix on the last commit.
2011-06-08 16:41:58 -07:00
2a46f756d6
Fixed a compilation problem. Also added a lengthy comment on the Map hack, so that it never goes unnoticed again.
2011-06-08 16:38:25 -07:00
1bd712c541
Reverting the [HG]MapModule to its buggy behavior above 4096. Ppl seem to prefer the color blue, and I have given up trying to make things work above 4096.
...
Revert "Improved reuse on the WorldMap/WorldMapModule.cs"
This reverts commit d473d9975e
2011-06-08 16:12:47 -07:00
80fc607d75
Fixed "Unknown User" listed as creator/owner on prims created with the Build button by foreign visitors. Added command to the UserManagementModule to list all the known bindings between user UUIDs and their names: show user-names.
2011-06-08 16:01:33 -07:00
9759b2a4bb
Added EventManager.OnPrimsLoaded, an event that modules can hook up onto so that they know when the scene's objects have been loaded from the DB.
2011-06-08 15:18:14 -07:00
90f657d77d
Deleted wrong debug message.
2011-06-08 13:45:38 -07:00
61f1c2b2c5
Write estate errors on startup to the log
2011-06-07 20:20:04 -07:00
39323055bd
When a plugin fails to load because a DLL is missing, log which DLL it is
2011-06-07 20:17:49 -07:00
eabfc9ca15
Added error message to help understand http://opensimulator.org/mantis/view.php?id=5527
2011-06-07 20:05:24 -07:00
3307db5d4a
This hopefully fixes all issues with online/offline notifications across grids. http://opensimulator.org/mantis/view.php?id=5528
2011-06-07 19:36:04 -07:00
02b40670be
This makes the display names work better for foreigners
2011-06-07 12:10:57 -07:00
41627bdf8a
Remove scary error message
2011-06-07 12:09:32 -07:00
f5d82350bb
This fixes the crash reported in http://opensimulator.org/mantis/view.php?id=5529 related to sending IMs to foreign friends who are offline. Hopefully.
2011-06-07 10:51:12 -07:00
1a23d322ac
More on the hunt for the slow down on HGFriendsModule. - Don't requests the online friends on foreign grids. If this works, there's another way of getting that info.
2011-06-06 19:52:50 -07:00
dce0e46eaa
Moved the Mono Addins declaration of the HGFriendsModule to where the one for FriendModule is -- CoreModulePlugin.addin.xml (trying to hunt down the slowness reported by Nebadon related to HGFriends)
2011-06-06 18:20:02 -07:00
e77ca65e57
This should make offline IMs work again. It should work for incoming foreign IMs where the local recipient is offline. I can't test any of this, because I don't run an offline IM server.
2011-06-06 17:46:34 -07:00
6861606b6d
Narrow down the exception catching to exactly the exception of interest. This may decrease the time of processing prims with broken user data.
2011-06-05 19:46:29 -07:00
205b2f7ea4
Remove the unmaintained 'CMS' framework, which was really a 'source-control' experiment from 2008.
...
This hasn't been touched for about 2 years and I haven't being using it. If this is wrong then please let me know.
2011-06-04 03:01:52 +01:00
fe471b6424
Extend TestGiveInventoryFolder() to test giving back the freshly received folder
2011-06-04 02:44:53 +01:00
12b1cbf8bf
Fix give inventory tests to use different users rather than (accidentally) the same user. Extend TestGiveInventoryItem() to test giving back the same item.
2011-06-04 02:39:26 +01:00
fe890554fb
insert an InventoryArchiveUtils.FindItemsByPath() to return multiple items rather than just the first one
2011-06-04 01:37:01 +01:00
896f039513
create TestGetInventoryItem()
2011-06-04 00:51:49 +01:00
1543fd7fff
extend TestGiveInventoryFolder() to check for the receipt by user 2
2011-06-04 00:20:54 +01:00
66004a9375
If an llSensor() is in an attachment, make the detection cone face in the direction of the avatar, not the relative rotation of the attachment towards the avatar.
...
This is effectively a copy/paste from 459323a
2011-06-03 23:43:09 +01:00
d09210da86
minor: add in method print out to new test
2011-06-03 23:15:31 +01:00
527e10a04e
add stub UserInventoryTests.GiveInventoryFolder(). Not yet complete
2011-06-03 23:13:05 +01:00
cf86ba5559
Added prefix HG to the name of the landmark item in inventory, as a soft reminder that the landmark belongs to a place in another grid. People can change the name, but that's their decision.
2011-06-03 11:48:24 -07:00
623706d988
HG Landmarks bug fix: pull landmark asset data from user's asset server when user is traveling.
2011-06-03 11:33:44 -07:00
fde3e704d3
oops
2011-06-03 10:50:55 -07:00
e33cedfd42
HG Landmarks now working.
2011-06-03 10:26:58 -07:00
995b893e4c
HG Landmarks being created. WARNING: new config var under [HGInventoryAccessModule], Gatekeeper.
2011-06-03 09:04:34 -07:00
76c60f1f99
Moved CreateNewInventoryItem to the InventoryAccessModule in preparation for supporting HG landmarks.
2011-06-03 08:27:01 -07:00
2a12d143c2
HG IM: increase the timeout value
2011-06-02 10:44:10 -07:00
6312eea459
HG IM bug fix: grid_instant_message was being placed in the default port instead of the specified one.
2011-06-02 10:14:26 -07:00
65c71050cc
Extra debug message
2011-06-02 09:39:29 -07:00
3c15c0b264
Added test IM client.
2011-06-02 09:39:09 -07:00
4696a9c95e
Bug fix on HG IM.
2011-06-02 08:13:54 -07:00
f2f30a7890
HG Friends bug fix: connector was shrinking principalID to UUID.
2011-06-02 07:26:40 -07:00
c13acdf5a1
This is the better solution: make the combined key be only on the first 36 characters of each field -- that's the UUIDs. Thanks coyled. WARNING: Again, people who have gone through this migration and failed need to run it manually.
2011-06-01 20:19:22 -07:00
43ecc46a22
It looks like there's a better solution for that problem.
...
Revert "Changed Friends table to have 165-sized varchars on PrincipalID and FriendID. The reason for this number is the following: there is a combined key of these 2 fields; apparently MySql can't handle keys larger than 1000 bytes; when the table is created with utf8 encoding, this combined key is bigger than 1000 bytes, and the migration fails. WARNING: this is not a new migration! People who have gone through this migration and failed should update the sizes of these fields manually."
This reverts commit 3fa54a156a
2011-06-01 20:09:59 -07:00
3fa54a156a
Changed Friends table to have 165-sized varchars on PrincipalID and FriendID. The reason for this number is the following: there is a combined key of these 2 fields; apparently MySql can't handle keys larger than 1000 bytes; when the table is created with utf8 encoding, this combined key is bigger than 1000 bytes, and the migration fails. WARNING: this is not a new migration! People who have gone through this migration and failed should update the sizes of these fields manually.
2011-06-01 20:02:26 -07:00
46cdd442a8
[Profiles] --> [Profile]
2011-06-01 18:18:31 -07:00
777f57d946
Re-Apply Use current TravelingAgent if the the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady""
...
This reverts commit 0a430bbffb
2011-06-01 18:47:06 -04:00
0a430bbffb
Revert "Use current TravelingAgent if the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady"
...
This reverts commit 4b9e446c62
2011-06-01 18:10:56 -04:00
ac4d080aaf
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-06-01 17:01:40 -04:00
984b801dd9
Merge branch 'master' of /home/opensim/src/opensim
2011-06-01 17:01:08 -04:00
4b9e446c62
Use current TravelingAgent if the login failure reason is "Logins Disabled" to fix NullReferenceException, allowing agent to login to fallback region when logins are disabled by "StartDisabled = true" or when logins are disabled by RegionReady
2011-06-01 16:57:01 -04:00
b0ed0e63dc
Adding boolean alias for commandline switches like -save_crashes=yes
2011-06-01 21:14:16 +01:00
54096db30b
Fix: The command line switches 'save_crashes' and 'crash_dir' haven't actually worked
2011-06-01 21:06:43 +01:00
5fb0455e92
Updates to MSSQL to most recent compatibility, also included Windlight support. Needs plenty of testing but clean install and migration from 0.6.9 have been tested and work, a few indexes still need to be added for performance.
2011-06-01 21:01:04 +01:00
a3e0895f12
a few minor formatting tweaks
2011-06-01 20:55:03 +01:00
c43ad8a0e7
A final couple of tweaks to GroupsModule.cs. Remove unneeded delegate, and prettify codeing style/formatting
2011-06-01 20:51:52 +01:00
8bacf56e46
revert the prematurely included groups patch, yet again
2011-06-01 20:51:38 +01:00
929bdba346
Merge branch 'master' of /home/opensim/src/opensim
2011-06-01 13:47:38 -04:00
aed6e74080
Add alternate region handling for url based logins as found in login to "home" or "last"
2011-06-01 13:44:20 -04:00
5711ada5c9
Fix dumb sql mistake in MSSQLGenericTableHandler.Delete()
2011-05-31 22:42:18 +01:00
c67fa72d56
When sending an LLUDP MoneyBalanceReply message, fill out the transaction item description even though there is none.
...
This is to deal with a problem in libomv where calling ToBytes() without this crashes because of an ItemDescription.Lnegth dereference.
2011-05-31 19:57:08 +01:00
8129e64e2a
Fill in the new OwnerData field in the LLUDP ScriptDialog message.
...
If we don't do this then viewer 2.8 crashes.
Resolves http://opensimulator.org/mantis/view.php?id=5510
2011-05-31 19:25:01 +01:00
392d270264
revert the patch that accidentally got added in the last commit
2011-05-31 18:49:38 +01:00
c4b265aeae
update libomv libraries to 0.9.0
...
this is a prerequisite to fixing llDialog issues for the latest Linden viewers, since they are now making use of a new OwnerData field in the ScriptDialog message
2011-05-31 18:47:13 +01:00
44371118a2
Made GetMapImage public in the Hyperlinker
2011-05-30 20:23:45 -07:00
b81a304baa
Made the GatekeeperConnector a public property.
2011-05-30 20:12:05 -07:00
e14b7ec9e1
HGWorldMap: don't send map blocks of hyperlinks that are farther than 4096 cells from the current region.
2011-05-30 17:19:46 -07:00
d473d9975e
Improved reuse on the WorldMap/WorldMapModule.cs
2011-05-30 17:15:55 -07:00
5cb7d8bc71
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-28 13:52:27 -07:00
d5326197ac
Fixed an issue with the response of CreateAgent over the SimulationConnector.
2011-05-28 13:52:06 -07:00
3326e417b4
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 16:21:30 -04:00
c7e18f9017
Adding an event to signal that logins are enabled
...
Added an event to signal the eabling of logins and added an alert to send to a configured service.
2011-05-28 16:20:10 -04:00
d2c2a4301b
Merge branch 'master' of /home/opensim/src/opensim
2011-05-28 00:39:21 -04:00
99f42c0a6e
Add option to disable logins
...
This just covers script loading for now. More to come.
2011-05-28 00:35:06 -04:00
6f4a2685cf
minor: remove mono compiler warning
2011-05-27 23:43:31 +01:00
28cd03cda5
fix bug where generic sqlite table delete wasn't working.
...
this would have caused dupe links bugs when using the sqlite adaptor
2011-05-27 22:54:59 +01:00
b0c9696de0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-27 21:21:01 +01:00
e9988a3728
Make sure culture is en-US when saving archive related xml.
...
This might resolve http://opensimulator.org/mantis/view.php?id=5475
2011-05-27 21:19:20 +01:00
fcef4688a8
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-27 13:07:39 -07:00
76525be7b2
HG lures working! Friends can offer friends HG teleports via the profile. WARNING: additional configuration for HG inis -- see *Common.ini.example
2011-05-27 13:07:18 -07:00
4e4db749eb
If parsing fails in the primitive base shape (which prints out a debug log message), also print out the name and uuid of the part containing this shape.
...
This is to help in diagnosing parsing failures.
2011-05-27 20:59:35 +01:00
0af5bb239f
When saving an iar, don't chase down link asset IDs (since these points to other items rather than real assets)
...
This bug had no practical effect other than to make "save iar" misreport the number of missing assets
2011-05-27 19:39:03 +01:00
4087a453dc
Avoid a scary warning message about null replies from the user agent service.
2011-05-27 08:53:26 -07:00
d60f525baa
HG inventory transfers over the profile working.
2011-05-27 08:19:40 -07:00
36f9d55c36
Added a BasicProfilemodule so that the profile-based actions (like give inventory, etc) work. This is just a mock profile, the same for all users, and with no DB backend behind it -- meaning that nothing will be saved. For serious profiles, use 3rd party implementations.
2011-05-27 07:00:36 -07:00
0d29f73916
Commented a few extra debug messages.
2011-05-26 19:13:03 -07:00
b17afe43c4
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-26 15:52:34 -07:00
0c58a9e680
HG IM in grid mode working fairly well. Unknown target user references looked back in source user's User Agent service.
2011-05-26 10:04:48 -07:00
91ec1a572a
improve help information for "appearance show"
...
at the moment, this just performs a baked avatar check for everybody in the region. If the check returns 'corrupt' then a baked texture is missing and other avatars will continue to see the gas ball.
2011-05-26 02:48:47 +01:00
3270f4353e
Add --noassets option for "save iar"
...
Like "save oar", this saves an iar without assets
This can be useful for backup when you know the required assets will still be present (e.g. you're backing up the assets db separately).
This also bumps the iar format version to 0.3 and 1.2 respectively.
0.3 is backward compatible with previous opensim versions
1.2 is used if the --profile switch is specified. It is only compatible with 0.7.1 presently.
2011-05-26 02:22:52 +01:00
c7e46e8a51
Bump OAR file format version up to 0.7 for this development cycle.
...
This adds a <assets_included>true|false</assets_included> element to the oar control file, though this is not used on reloading at this time.
This addition is backward compatible with previous opensim releases
2011-05-26 01:37:15 +01:00
ab855e6f8d
fix bug where outfit folder links could not be deleted
2011-05-26 01:32:36 +01:00
d9889ae2e7
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-26 01:28:48 +01:00
6f4d079fc5
Add a --noassets option to "save oar".
...
This switch stops any assets being saved in the oar.
This can be useful if you're using OAR to backup regions and you know you'll always have the original asset database available.
2011-05-26 01:27:01 +01:00
587b17e23b
HG: Renamed, shuffled some interfaces around. Move them all to IHypergridServices.
2011-05-25 12:37:37 -07:00
5c2168cae7
HG: Instant Message working. Tested on HG standalones only. Needs a lot more testing.
2011-05-25 12:32:21 -07:00
e398c33648
Add PayPrice to serialization format Xml2
2011-05-25 12:17:46 +01:00
ef3f6b4e63
Revert "Make client event handlers for money only work on root agents"
...
This reverts commit a8913141c0
2011-05-24 16:33:51 -04:00
a8913141c0
Make client event handlers for money only work on root agents
2011-05-24 16:07:48 -04:00
e19031849e
Added necessary code to drop inventory on hg friends using the profile window, but can't test because this mechanism doesn't seem to work without a profile service.
2011-05-24 09:38:03 -07:00
28c25d8477
Allow disabling the legacy backup mechanism to avoid the object clone if
...
backup is not used.
2011-05-24 04:03:51 +01:00
24f28d3534
HG friends: Status notifications working. Also initial logins get the online friends in other grids.
2011-05-23 19:45:39 -07:00
61d4291da5
Create a method to force the script engine to save state from outside
2011-05-24 03:17:12 +01:00
178d541dca
Add an event for an orderly region shutdown that fires once per region before
...
the SceneGraph is torn down.
2011-05-24 01:19:48 +01:00
24c00acedc
Fix Mantis #4429 : Allow llGiveInventory to work across sim borders.
2011-05-23 02:52:28 +01:00
336665e035
More on HG Friends. Added Delete(string, string) across the board. Added security to friendship identifiers so that they can safely be deleted across worlds. Had to change Get(string) to use LIKE because the secret in the identifier is not always known -- affects only HG visitors. BOTTOM LINE SO FAR: HG friendships established and deleted safely across grids, local rights working but not (yet?) being transmitted back.
2011-05-22 16:51:03 -07:00
fed3cc630e
File to be removed
2011-05-22 15:35:40 -07:00
dc95e38e42
Add stubs for unimplemented lsl functions
2011-05-22 14:59:18 -04:00
58c53c41de
Fixed permissions bug related to friends in PermissionsModule. Added FriendsData[] GetFriends(string principalID) to IFriendsData and FriendInfo[] GetFriends(string PrincipalID) to IFriendsService. Refactored some more in the FriendsModule. Made client get notification of local friends permissions upon HGLogin. HG Friends object permissions work.
2011-05-21 16:48:00 -07:00
80457111e0
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-21 14:07:30 -07:00
bb9b317f15
Get rid of OpenSim.Tests.Common.Setup subpackage in favour of just OpenSim.Tests.Common instead
2011-05-21 01:05:20 +01:00
4073f10133
rename test helpers enclosing package from Setup to Helpers
2011-05-21 00:51:34 +01:00
94553d4753
rename UserInventoryTestsUtils -> UserInventoryHelpers for consistency
2011-05-21 00:48:01 +01:00
156cc1418b
test helper rename for consistency
2011-05-21 00:44:58 +01:00
d7e5b76d73
refactor: rename AddSceneObjectItem to AddSceneObject
2011-05-21 00:39:42 +01:00
084059319c
refactor: move scene object item creation code into TaskInventoryHelpers
2011-05-21 00:37:20 +01:00
9103fe84d5
move test task inventory notecard item creation into a new TastInventoryHelpers class
2011-05-21 00:25:58 +01:00
0050bb438c
refactor: use SceneSetupHelpers.CreateSceneObject()
2011-05-21 00:15:22 +01:00
534ee52a12
rename UserProfileTestUtils to UserAccountHelpers to be consistent with other test helper names
2011-05-21 00:11:52 +01:00
3fed61a5d5
refactor: in TaskInventoryTests, use UserProfileTestUtils.CreateUserWithInvetory()
2011-05-21 00:07:24 +01:00
bc43cef581
minor: remove mono compiler warning
2011-05-21 00:05:00 +01:00
90567a9eaa
refactor Scene.RezObject() to use AddNewSceneObject() rather than copy/pasting code with small differences
2011-05-21 00:02:53 +01:00
f2095ea279
refactor TestRezObjectFromInventoryItem()
2011-05-20 23:45:39 +01:00
4b0fc4faef
implement Scene.GetSceneObjectGroup(string name) to match the equivalent GetSOP method
2011-05-20 23:41:14 +01:00
91a9f30b16
implement Scene.GetSceneObjectGroup(UUID fullID) using existing index
2011-05-20 23:34:34 +01:00
7ed419217f
add test for rezzing an object from a prim item
2011-05-20 23:22:27 +01:00
9fc29e1595
Implement llGetLinKNumberOfSides().
...
Based on code in http://opensimulator.org/mantis/view.php?id=5489 Thanks onesong.
2011-05-20 20:19:32 +01:00
6e7b588235
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-20 20:06:51 +01:00
a2c19847b4
ScriptEngine/Shared: Fix bug 5473 (v2).
2011-05-20 20:00:55 +01:00
d21e9c755f
HG Friends working to some extent: friendships offered and accepted correctly handled. Friends list showing correct foreign names. TODO: GrantRights.
2011-05-19 16:54:46 -07:00
584bce36ac
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-19 01:35:11 -04:00
926a100652
Add stub for llGetLinkNumberOfSides(integer link)
2011-05-19 01:34:11 -04:00
bdd7849094
Allow item links to be deleted even when other deletes and purges are disabled.
...
If these links are not deleted, then they will build up in the player's inventory until they can no longer log in.
Accidental deletion of links due to bugs or other causes is potentially inconvenient but on a par with items being
accidentally moved. When a link is deleted, the target of the link is never touched.
This is a general solution that accounts for the use of links anywhere in the user's inventory.
2011-05-19 00:51:14 +01:00
6dcc87b1ad
Accidentally committed too early
...
Revert "Allow item links to be deleted even when other deletes and purges are disabled."
This reverts commit 491279f99a
2011-05-18 00:23:35 +01:00
c562b9ef19
correct small mistake in "delete object name <name>" usage summary
2011-05-18 00:22:09 +01:00
491279f99a
Allow item links to be deleted even when other deletes and purges are disabled.
...
If these links are not deleted, then they will build up in the player's inventory until they can no longer log in.
Accidental deletion of links due to bugs or other causes is potentially inconvenient but on a par with items being
accidentally moved. When a link is deleted, the target of the link is never touched.
This is a general solution that accounts for the use of links anywhere in the user's inventory.
2011-05-17 22:31:16 +01:00
784f70f704
don't throw a null reference if an inventory link target doesn't exist when we're inspecting in order to send the required inventory folders
2011-05-17 02:25:05 +01:00
467d7060ca
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-17 01:58:51 +01:00
4232b1a89b
convert tabs to spaces
2011-05-17 01:57:18 +01:00
901448a8eb
Fixup documentation for AutoBackupModule.
2011-05-17 01:55:54 +01:00
a2f034c554
Changed yet more Warns to Debugs.
2011-05-14 13:36:55 -07:00
be6feff331
Also changed a couple of messages in WebUtil from Wanr/Info to Debug.
2011-05-14 13:09:59 -07:00
082a9ecd31
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-14 12:57:34 -07:00
a3aa839d75
Stop spamming Nebadon's console when assets aren't found in the asset server.
2011-05-14 12:56:50 -07:00
e3b8d42bbc
refactor: improve PrimLimitsModule to call ILandObject.GetSimulatorMaxPrimCount() rather than use copy/pasted code
2011-05-14 02:51:29 +01:00
340e3ccf16
refactor: remove thisObject argument from ILandObject.Get*MaxPrimCount() instance methods since it didn't make sense to use anything other than the instance themselves.
2011-05-14 02:42:47 +01:00
bef1ffa7db
simplify code in llGetParcelMaxPrims() to use existing code in LandObject rather than duping the algo
2011-05-14 02:34:46 +01:00
1d86079141
Correct llGetParcelMaxPrims() to use the same calculation as used elsewhere instead of the old 0.22 prims/meter squared fudge factor.
...
Thanks to tglion for this.
2011-05-14 01:26:04 +01:00
26ce1d27d0
Minor doc change to see if this provokes a good panda build
2011-05-14 01:07:06 +01:00
64d868fb64
When loading an OAR that doesn't have parcels, create a default parcel
2011-05-14 00:41:32 +01:00
cb6cd3714e
The get_grid_info REST call now encodes XML Entities
2011-05-14 00:31:54 +01:00
7a54638b57
Swapped the two restart command descriptions each other
2011-05-14 00:25:31 +01:00
5573fcfa93
Fix adding/removing/replacing outfits in viewer 2
...
To get this to work, I had to disable the dupe link check I put in a couple of commits ago.
When the viewer adds wearables to an existing outfit, it first requests deletes of all the existing links before creating a new set.
Since these messages are async, the creates were being received before the deletes had a chance to complete, resulting in missing current outfit links.
However, the dupe check shouldn't be as important now that broken links have been fixed - it was the broken links that were causing the client to create dupes.
Tested on kokua 0.1.0 WIP and SL 2.6.3. I now have no problems managing outfits on my standalone.
2011-05-14 00:10:27 +01:00
59d8588ae1
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-05-13 12:03:16 +01:00
eceedba23b
Fix the cert validation handler so that it will not block other parts of
...
the server doing ssl successfully.
2011-05-13 12:02:49 +01:00
e39dec6f37
Hopefully this fixes offline messages. The problem was: the server is not setting the ContentLength of the response. That comes up to OpenSim as ContentLength=-1, which made the existing test fail.
2011-05-12 20:48:24 -07:00
1cc70df3b4
One more thing printed out. #OfflineIM
2011-05-12 20:20:08 -07:00
84f2a779b2
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-12 19:57:15 -07:00
301321c853
Instrument the heck out of offline messages. THIS IS VERY VERBOSE.
2011-05-12 19:56:59 -07:00
5f9edd195c
Fix broken inventory links on viewer 2.
...
It appears that if the viewer requests a folder containing links, we must also send the folders that contain the link targets first.
This was tested with Kokua 0.1.0 WIP though I predict it will also work with other viewer 2s
2011-05-13 03:24:19 +01:00
691283c44e
One more debug message for offline IMs.
2011-05-12 19:10:44 -07:00
9e310a0c0f
Sequencing the using and try clauses as they were before, but this shows that that obsolete function is not catching 404's as it should...
2011-05-12 18:53:22 -07:00
42bfab84b8
Bummer, can't print the data I wanted to see. Printing just the context.
2011-05-12 18:47:14 -07:00
f54a36bd59
Tracking a problem with offline IMs coming in as null list.
2011-05-12 17:34:26 -07:00
e9e4c009b4
This makes compression of fatpacks actually work. Previously they always failed. See comment in WebUtil.
2011-05-11 20:44:03 -07:00
9988bff9e3
Add a smidgen of method doc about the fact that item links reuse the asset id item slot
2011-05-12 03:18:53 +01:00
ac12ace6f1
Prevent viewer 2 from creating a duplicate outfit inventory links.
...
I believe this is safe since there is a 1-1 correspondence between link item and worn item (i.e. you can't be wearing the same item at two spots simultaneously in one outfit).
This should stop lots of duplicate links being created when viewer 2 is used.
However, this doesn't prevent broken inventory links, which I believe is timing related since the effect is not consistent (e.g. keep relogging and the viewer should end up seeing them correctly) . I think we actually see this problem on viewer 1 as well.
It might be easier just to implement the Fetch*2 inventory caps which are documented at http://wiki.secondlife.com/wiki/Inventory_API . WebFetch* has been deprecated by Linden Lab since viewer 2.5.1 and according to the sl wiki, "has numerous bugs".
2011-05-12 02:46:13 +01:00
7fa2489a6e
Revert "Functional improvement: close the stream. Non-functional: add debug messages to find out why updates are getting an error. WARNING: MASSIVE CONSOLE SPAM ON TPs."
...
This reverts commit 5548f83750
2011-05-11 13:15:27 -07:00
af2e12d2b4
One more debug message. Don't use this unless your name is nebadon.
2011-05-11 10:43:50 -07:00
5548f83750
Functional improvement: close the stream. Non-functional: add debug messages to find out why updates are getting an error. WARNING: MASSIVE CONSOLE SPAM ON TPs.
2011-05-11 10:21:42 -07:00
47735468d2
Somewhat reverting the last commit. The viewer ignores 255's on tiles that were previously on, so we need to send 254 (offline) explicitly. Also removing the +/-4 for HGMap, because it makes the map flicker.
2011-05-10 09:02:25 -07:00
e1a4a8d857
Changed the Access flag on HGMap to 255 (does not exist) and clarified the other value 254 too. Meanings taken from libomv.
2011-05-09 18:28:16 -07:00
7e2b35bbb3
Fixes gray tiles around +/-4 when user clicks on an empty tile. Affects regions above 4096 primarily.
2011-05-09 11:35:41 -07:00
8a5f6dc7a5
Fixes gray tiles on map search for viewers 1.
2011-05-09 10:25:42 -07:00
c0a69bfaab
The map is seriously broken. This doesn't fix it, but at least provides one more piece of data that seems to be required -- agent flags, which seem to be different in Viewer 2. WARNING: changes IClientAPI.
2011-05-08 22:50:04 -07:00
fd66903f74
Convert the prim count module into a permissionsmodule
2011-05-09 03:16:01 +01:00
527b4e7c7e
Incremental - Just did some cleanup of comments and class name change to clean up from using BareBonesNonShared as a template.
2011-05-09 03:14:54 +01:00
279ed08de1
Incremental patch to add config options to enable/disable the prim limits module to OpenSim.ini. EnforcePrimLimits is set to false by default to emulate the current behavior.
2011-05-09 03:14:48 +01:00
65d595597d
Adds an optional module to enforce prim limits on a given parcel Takes into account acculmitive prim allowance when multiple parcels are owned by the same avatar on the same region. Does not handle prims that are moved by a script or account for temporary objects at the time of creation. other wise handles all tested cases including: Creating a new object from the build menu Moving an object from another parcel duplicating an object via shift move rezing an object from a script
2011-05-09 03:14:41 +01:00
2b88d8f93f
Add commands to delete objects by name, UUID, creator or owner
2011-05-09 01:28:23 +01:00
00f10c900a
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-08 16:51:41 -07:00
3a5e841b0b
Fix content-type to be application/x-www-form-urlencoded
2011-05-08 16:51:04 -07:00
a650c74d23
Comment verbose debug message in GetTexture
2011-05-08 16:50:36 -07:00
c8b9558039
Also compress the actual fatpacks
2011-05-08 23:52:31 +01:00
e345f03895
Remove a spammy debug I left in. Disable TP cancel button at the point
...
of no return.
2011-05-08 22:05:33 +01:00
1be67914fa
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-05-08 20:20:40 +01:00
9688db2f68
Enable compressed (gzip) fatpack transfers.
2011-05-08 20:20:00 +01:00
25809caaeb
Mantis #5472
2011-05-08 09:28:15 -07:00
72fb0d5b93
Mantis #5470 -- add forgotten MSSQL's GridUserStore. Thank you MrMonkE
2011-05-07 14:56:59 -07:00
d4fcba08af
Add module with "appearance show" command.
...
At the moment, this command just asks the AvatarFactory to perform the existing baked texture check for each avatar in the simulator and returns "OK" or "corrupt".
This is for debugging purposes
2011-05-07 01:06:55 +01:00
737add1683
Removed SimpleRegionInfo, which was obsolete and not used anywhere.
2011-05-06 17:02:46 -07:00
eaa33cf478
adjust avatar terse update packet filter distance error threshold based on avatar speed
2011-05-06 16:56:54 -07:00
b140aef87a
refactor: simplify ConfigSettings
2011-05-06 22:51:36 +01:00
04ecd748d9
remove further mono compiler warnings
2011-05-06 22:47:41 +01:00
3d095e84d6
minor: remove mono compiler warnings
2011-05-06 22:45:03 +01:00
f5ec332474
remove obsolete [StandAlone] config section parsing, none of which was actually used since being superseded by the connector architecture in 0.7
2011-05-06 22:41:07 +01:00
913e6b70c6
minor: slightly shorten "show digest" printing code
2011-05-06 22:13:56 +01:00
621279e498
on asset "show digest" command, print out the asset type name (e.g. texture) as well as its number
2011-05-06 22:04:26 +01:00
9ff94a3a44
Say which filename an asset has been dumped to on a successful dump
2011-05-06 21:58:41 +01:00
2ef8e03773
Change command help text for "show capabilities" to "show caps", as this is the actual command that has to be typed on the console.
...
Thanks to makopoppo for the patch - http://opensimulator.org/mantis/view.php?id=5467
2011-05-06 21:21:02 +01:00
7c3e8a106b
Merge branch 'master' of https://github.com/allquixotic/opensim-autobackup
2011-05-06 20:51:55 +01:00
74e981e796
One more bug fix concerning library items that weren't being copied to user's inventory. Also commented verbose debug message.
2011-05-06 09:56:27 -07:00
50c0069f7d
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-06 09:09:13 -07:00
eafc01cf8f
Bug fix: iars under Library weren't being loaded.
2011-05-06 09:08:24 -07:00
68bb0f81e2
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-05-05 20:07:19 -04:00
fd44540c02
add descriptive explanations for region restart functionality
2011-05-06 01:06:28 +01:00
e4e95706d5
Add support for llRequestSecureURL() if ssl is enabled
2011-05-05 19:57:10 -04:00
8ca7938753
Adding ssl support
...
Adding ssl support for "Out of Band" applications such as the remote
admin module or Robust services
2011-05-05 19:56:54 -04:00
8755a48cde
fix command display for debugging 'emergency-monitoring'
2011-05-06 00:34:04 +01:00
46baadbb65
remove the NDesk.Options using since didn't end up needing it
2011-05-06 00:22:19 +01:00
bc49a0bc5d
Add "dump asset" command to the asset service for debugging purposes.
...
This command dumps the asset with the given id to a file with the same name.
2011-05-06 00:09:08 +01:00
f5bb6edd85
Squish a warning
2011-05-05 13:01:46 +01:00
e8944d6c31
Test m_Enabled on RemoveRegion.
2011-05-04 20:40:25 -07:00
6d34932775
Merge branch 'master' into caps
2011-05-04 20:30:33 -07:00
6c503e75ac
Put the previous state back in the attachments in case the agent transfer fails.
2011-05-04 12:04:35 -07:00
df7dacd004
Fixes mantis #5461 .
2011-05-04 11:34:18 -07:00
a0f3b23065
Merge branch 'master' into caps
2011-05-04 07:31:32 -07:00
4c59d57596
use getters instead of member variables in velocity network filter code and add some more descriptive comments.
2011-05-04 03:29:06 -07:00
13ab00e45a
adjust terse avatar update filtering to send updates when distance traveled does not match expected distance, rather than at a fixed time period. this should smooth avatar motion somewhat when moving in a straight line and velocity is constant.
2011-05-03 19:47:50 -07:00
98b84802e4
Changed the defaults, so that it behaves exactly is it has been behaving (no WebFetch cap by default).
2011-05-02 20:19:36 -07:00
ac9697edbe
Fixed: EventQueueGet and other caps were being wrongly deregistered. Also CapabilitiesModule was being instantiated twice (damn Mono.Addins).
2011-05-02 19:45:47 -07:00
6b52c1d6cd
Fix the GetTexture path to /CAPS/GetTexture for now until we have real capabilities.
2011-05-02 16:16:10 -07:00
883f21dd02
WebFetchInventoryDescendents working. Tested with robust.
2011-05-02 14:33:34 -07:00
2d403d5b18
Merge branch 'master' into caps
2011-05-02 11:56:51 -07:00
aba9ffdbd0
Refactored the GetMesh module into a handler and a module, to be the same as GetTexture.
2011-05-02 11:56:40 -07:00
f7d3720126
Increased timeout for fat UpdateAgent to 200secs. Nebadon's 3800-prim alien avatar takes 6secs to transfer between sims on the same machine...
2011-05-02 09:20:08 -07:00
51d0b8b4e9
Oops, forgot this one.
2011-05-02 09:06:21 -07:00
8cc547c277
Turns out that it's a bad idea to let Agent position updates linger for a long time on certain versions of mono. It's better to abort them if they take too long. So timeout is now an argument. Currently: 20secs for CreateAgent, 100secs for UpdateAgent (fat), 10 secs for UpdateAgent (Position); all of these divided by 4, for ReadWrite, as Mic had before.
2011-05-02 09:04:34 -07:00
10180760b7
Works!
2011-05-02 08:48:55 -07:00
0995fedcac
AutoBackupModule: Implement per-region settings in Regions.ini.
2011-05-02 04:32:31 -04:00
fffd42f5cb
Merge git://opensimulator.org/git/opensim
2011-05-02 02:23:18 -04:00
2aab033aaa
First pass at fixing justincc's feedback v2 ( http://opensimulator.org/mantis/view.php?id=5440 )
...
Fixing everything here (I think) except the per-region config. That's next.
2011-05-02 02:20:50 -04:00
2d21052fa3
Start to drill down on GetTexture. Read the config and do different things.
2011-05-01 19:09:08 -07:00
f79400e94c
Broke down Caps.cs into a generic Caps object that simply registers/unregisters capabilities and a specific bunch of capability implementations in Linden space called BunchOfCaps.
...
Renamed a few methods that were misnomers.
Compiles but doesn't work.
2011-05-01 18:22:53 -07:00
275046cf02
Change GetTextureModule.cs to conform to the new IRegion module interface. NOTHING OF THIS WORKS. Compiles.
2011-05-01 12:03:00 -07:00
126d2adeba
Move CapabilitiesModule back to CoreModules. This one belongs there.
2011-05-01 12:02:07 -07:00
f10666c7ba
How this might look like from a configuration perspective. Changes OpenSimDefaults.ini.
2011-05-01 10:07:54 -07:00
8cc9d22b89
Merge branch 'master' into caps
2011-05-01 09:31:26 -07:00
bbe41c75e1
Fixed confusing OSDMap that comes as the response of QueryAccess in the case it fails.
2011-05-01 09:30:23 -07:00
f0bf64b6de
Merge branch 'master' into caps
2011-05-01 09:11:16 -07:00
6b2b036387
Added OpenSim.Capabilities.Handlers. For the moment it has only the GetTexture handler. The region module in Linden space uses it. WARNING: nothing of this works yet, it just compiles.
2011-05-01 09:08:18 -07:00
d4323dd753
Increased Timeout to 30 secs.
2011-04-30 18:08:48 -07:00
91a604d4b6
Removed XXX Debug. Increased ReadWriteTimeout on ServiceOSDRequest, because it was _way_ too low and is probably making writes abort in the middle.
2011-04-30 17:40:21 -07:00
56df746133
XXX DEBUGGING!
2011-04-30 16:53:43 -07:00
00e94b0ba8
Check for RegionID instead of RegionHandle. Other minor tweaks
2011-04-30 16:53:11 -07:00
e3c27d8527
Nope, that didn't feel right. Moving all those modules to Linden space.
2011-04-30 13:24:25 -07:00
c062138dad
Moved several cap-based-service-providing modules from where they were into a newly created CoreModules/Caps. Not all.
2011-04-30 12:23:40 -07:00
3e79842312
Renamed OpenSim.Framework.Capabilities.dll to OpenSim.Capabilities.dll
2011-04-30 11:03:22 -07:00
d8ee0cbe1c
First stab at cleaning up Caps. Compiles. Untested.
2011-04-30 09:24:15 -07:00
99b35d3ca6
When coming in from a legacy region without fatpacks, start scripts the
...
usual way
2011-04-30 16:20:20 +01:00
4d5d6222f7
Delaying starting the scripts on TPs and crossings until the agent is root.
2011-04-29 17:09:48 -07:00
412503b216
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-04-29 15:52:40 -07:00
0d49611f6d
Remove the scripts of the attachments in the departing region and recreate them if fail.
2011-04-29 15:52:06 -07:00
8f14c3f04f
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-04-29 15:49:49 -07:00
d565041e16
Fix crash when [Mesh] section is missing from configuration files
2011-04-29 15:49:10 -07:00
73caa4e94a
Minor correction to yesterday's changes. Make normal prim crossing (no attach) work well again.
2011-04-29 08:42:51 -07:00
e462b926ac
Minor improvement in version checking (Simulation service)
2011-04-29 08:01:44 -07:00
97790075fe
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-04-28 20:47:34 -07:00
9892e115cc
Fatpack message on agent transfers: 1 message only (UpdateAgent) containing the agent and all attachments. Preserves backwards compatibility -- older sims get passed attachments one by one. Meaning that I finally introduced versioning in the simulation service.
2011-04-28 20:19:54 -07:00
5e578c9755
Merge branch 'master' of ssh://opensimulator.org/var/git/opensim
2011-04-28 23:43:42 +01:00
cd7517ccb9
Stop CHANGED_INVENTORY firing twice if a notecard is edited in prim.
...
Addresses http://opensimulator.org/mantis/view.php?id=5444
Fix is to stop the asset transaction calling UpdateInventoryItem() since the caller is doing it anyway, which is more correct.
This did not effect scripts.
2011-04-28 22:59:12 +01:00
35f190cc92
One less [Serializable] -- ClientInfo.
2011-04-28 09:06:57 -07:00
549dc5aeb9
Eliminated sAgentCircuitData, a data structure that has been obsolete for quite some time.
2011-04-28 08:58:04 -07:00
7ecf689584
Thank you MrMonkE for a patch that seems to bring the MSSQL data layer up to speed with 0.7.x.
2011-04-28 07:28:29 -07:00
50aa93137d
Fix a bug where physical objects rezzed with an initial velocity by script do not receive this velocity.
...
This is a minimal fix for the 0.7.1 release, pending a non copy/paste solution.
This hopefully addresses http://opensimulator.org/mantis/view.php?id=5457
The bug was introduced in commit 3ba5eeb
2011-04-28 00:59:21 +01:00
e0576b56d3
Thank you Snoopy for a patch that adds some filtering to client versions allowed at login and HG-login times. NOTE: additional (optional) configuration variables in [LoginService] and [GatekeeperService]. See .examples.
2011-04-27 07:02:37 -07:00
16f6f55f2d
network traffic reduction - decrease update frequency for moving avatars when velocity is unchanged
2011-04-26 16:22:44 -07:00
1505fbb647
Add back the high prioritization for other avatars in the
...
BestAvatarResponsiveness prioritizer.
2011-04-26 08:54:05 -07:00
587aa91e36
Merge git://opensimulator.org/git/opensim
2011-04-26 11:45:38 -04:00
36fef21e52
Merge branch 'master' into queuetest
2011-04-26 08:42:21 -07:00
c82c7e6ed9
Wait for OnOarFileSaved event callback before executing script
...
We want to execute the (optional) user script after I/O is done on the oar.
I wasn't aware that ArchiveRegion is asynchronous -- now I am.
Should fully resolve comment 0018290 at
http://opensimulator.org/mantis/view.php?id=5440
2011-04-26 11:42:06 -04:00
e579a990b4
Removed stale client components: MXP and VWoHTTP.
2011-04-25 18:59:01 -07:00
037373b825
recover from unhandled exception from bad rotation data while processing entity updates in LLClientView.cs
2011-04-25 17:11:54 -07:00
b9bca893ef
Removed debug message in the token bucket code
2011-04-25 16:13:16 -07:00
13f141a4d5
Fix the totals shown by show throttle
2011-04-25 15:36:59 -07:00
b7eda288bf
Merge branch 'master' into queuetest
2011-04-25 15:12:53 -07:00
77ab7ce084
Fixed the transmission of throttles from root agent to child
...
agents. Child throttles are based on the number of child agents
known to the root and at least 1/4 of the throttle given to
the root.
2011-04-25 15:11:29 -07:00
ef4f1fc4ba
Made things consistent between LocalInventoryServiceConnector and RemoteXInventoryServiceConnector on GetFolderContent.
2011-04-25 11:00:48 -07:00
2fefb7adee
Merge branch 'master' into queuetest
2011-04-25 10:55:19 -07:00
024c12abc3
Cleaned up various configuration options. Removed the category throttle
...
limits because the only ones used now are the defaults (which are overwritten
by the client throttles anyway). Updated the default rates to correspond to
about 350kbps.
Also added a configuration to disable adaptive throttle. The default
is the previous behavior (no adaptation).
2011-04-25 10:44:41 -07:00
3a38bd8854
Addresses mantis #5449 -- crashing exception in SendInventoryFolderDetails.
2011-04-25 08:53:48 -07:00
1d7c83c39f
Merge branch 'master' into queuetest
2011-04-25 08:41:21 -07:00
507f0e9ffd
Upped VERSION_NUMBER in master to 0.7.2.
2011-04-24 16:21:01 -07:00
e3c3d626fb
Commented verbose debug message.
2011-04-24 16:14:24 -07:00
d287e0ac68
Merge git://opensimulator.org/git/opensim
2011-04-23 18:33:08 -04:00
440d54a521
AutoBackup: Removed unneeded imports.
2011-04-23 18:32:08 -04:00
082fad6dd2
Fix most issues raised by justincc: http://opensimulator.org/mantis/view.php?id=5440
2011-04-23 18:29:13 -04:00
e2c6ed236d
Fix a bug looping through the priority queues. This should fix the problem
...
of not all prims being sent without reprioritization.
2011-04-23 12:17:10 -07:00
44e43d9d24
Added MaxAgents configuration option to RegionConfig.ini allowing region hosters to setup regions maintaining more control over system resources.
2011-04-23 00:40:08 +01:00
d5256094d9
print invalid command message to the console, not the log
2011-04-23 00:16:55 +01:00
a3bd769cb3
Added a second immediate queue to be used for the BestAvatar policy
...
and currently used for all of an avatars attachments by the other
policies. Also changed the way items are pulled from the update queues
to bias close objects even more.
2011-04-22 14:55:23 -07:00
08e58e7ca6
Set the initial rate for the adaptive throttle to 160Kpbs
...
or about 15 packets per second.
2011-04-22 14:02:34 -07:00
3534f4492a
Various clean ups. Removed some debugging code. Added a new "show pqueues"
...
command to look at the entity update priority queue. Added a "name" parameter
to show queues, show pqueues and show throttles to look at data for a specific
user.
2011-04-22 14:01:12 -07:00
cbe49ed917
Merge branch 'master' of /home/opensim/var/repo/opensim
2011-04-21 19:08:31 -04:00
b8e282324e
fix merge conflicts with OpenSimDefaults.ini
2011-04-21 19:06:54 -04:00
e0002f6b64
some mesh config asthetics
2011-04-21 19:04:41 -04:00
0897647709
Merge branch 'queuetest' of ssh://opensimulator.org/var/git/opensim into queuetest
2011-04-21 15:41:15 -07:00
c5159ad8d0
Add some locking on the child list for the token bucket
...
hiearchy. A few other cosmetic changes.
2011-04-21 15:40:38 -07:00
7f28dd4b31
Refactor UnackedPacketCollection so ProcessQueues will handle Adds, Acks, and Removes in that order.
2011-04-21 15:40:32 -07:00
398bb2149a
Merge branch 'master' of melanie@opensimulator.org:/var/git/opensim
2011-04-21 23:04:01 +01:00
Justin Clark-Casey (justincc)