* Was caused by the lack of a local id. Local ids are now given from the same sequence as prims, rather than a separate one
* I don't believe this will cause any problems, but please revert to a separate sequence if it does
Included patch fixes error: Z and W terms in the quaternion were
swapped (ZERO_ROTATION is <0,0,0,1>, it was checking for <0,0,1,0>).
There is an issue with older prims: it seems their default sit
target was not always set to ZERO_ROTATION;
potential (asset bloat, asset server DOS due to no enforced delay)
Formatting cleanup. Change default permissions on the notecard to
not include "anyone can copy" and "anyone can move", as they are
meaningless on non-prim items.
- fixes IRCBridgeModule's XmlRpc method really paying attention to
region parameter
- cleans up indentation in IRCBridge code
- fixes ConciergeModule exception on client logout
* This should (hopefully) allow TestClient and stuff built on top of it to work again
* Will probably come back later and change variable names to stop this happening again
* Really this should be 1, but I think that this would be too slow compared to a Second Life server until we improve our ability to send textures of variable quality
* This may improve one aspect of sim performance where there are many avatars. However, there are still other performance problems that are unrelated to this change
* Value may be further tuned
* Removed temporary decals since the multipler setting will stick around now
* Inserts proper animation state names into data/avataranimations.xml file so that llGetAnimation() works as one would expect.
* Thanks StrawberryFride!
* This is a partial implementation of llGetAnimation that returns the name of the animation as stored in data/avataranimations.xml but not its state name (since we don't yet
have these).
* Thanks StrawberryFride
This patch allows an object to directly message another object given its
key using the method osMessageObject(key objectUUID,string message).
to communicate with an object it must implement the dataserver listener
method. The dataserver method is passed the key of the calling object
and a string message.
* Now I've had time to analyze this, the Second Life grid doesn't appear to send this to the client (which in principle should know what wearables it has already)
So basically simplifies what a lsl script that detects a avatar sitting on a prim, then stopping the sit animation and playing a custom animation, does.
Also added another ScenePresence.HandleAgentRequestSit() method , that accepts the name of the sit animation. So that modules can override the animation used, when they are doing a server controlled sit.
Started some work on making the stand pose be played as soon as a user logs into a region. Rather than them starting with their arms stretched. This still needs more work
* This should probably be 1, but currently by default it is 8, to reflect what was being eon3 in OpenSim before this revision. So if the client requested a maximum throttle
of 1500 kilobits per second, we would actually send out 1500 kilobytes per second
* Adjusting this multiplier down towards 1 may improve your OpenSim experience, though in other situations it may degrade (e.g. if you're using a standalone over high bandwidth
links)
* This is currently a user setting because adjusting it down may currently reveal other OpenSim bugs.
* The attached patch changes the LSLInteger operator overrides for == and != to return LSLIntegers 1 or 0 instead of a bool and adds similar operator overrides for >, <, >= and
<=
* Thanks idb!
on-/offline updates, calling cards for friends.
This adds methods in the DB layer and changes the MessagingServer, so a full
update (incl. UGAIM) is necessary to get it working. Older regions shouldn't
break, nor should older UGAIM break newer regions, but friends/presence will
only work with all concerned parts (UGAIM, source region and destination
region) at this revision (or later).
I added the DB code for MSSQL, too, but couldn't test that.
BEWARE: May contain bugs.
* This is to avoid repetitive null checks - I'm beginning to think that blasting away the root part on object deletion is actually a bad move. Perhaps we should leave it around
and let the client ignore any superfluous packets (which it may well do anyway), since we're constantly exposing a race condition
with the old Grid Instant Message over OGS1. Refactor the EventManager
to be independent of the rigid module structure design imposed by
the current implementation. Message routing is now done in the destination
module rather than in the event manager. This way, more or less granular
solutions are possible without core changes.
* This may help us detect if mysterious UDP disconnects are happening because of this.
* Shouldn't be any functional change but I would appreciate a buddy check from Teravus if he has time (as for all client stack changes)
* Since the client sets the appearance in the first place (in response to receiving wearables information originally) this seems a little redundant
* But I've realized I didn't actually test this assumption, so I'm going to reinstate it for now
* This is to make things less confusing to users (and maybe a little easier to do future version filtering for grid connections)
* If there's disagreement about this, then please say so (preferably in the opensim-dev mailing list)
* Whilst this does automatically get the client to rebake, on crossing a region border the 'local' assets are left behind
* There may be a cunning solution (such as squirting the assets on region crossing, or having them fetched from the original region) but
instead I'm going to opt for the easy solution of keeping them in the asset database, for now
* And hopefully rebaking all the time should no longer be necessary now
* It turns out that when the client baked the texture, the uploaded asset had the Temporary flag to true (Temporary is actually deprecated).
* It also had the StoreLocal flag set to true, which signifies that the asset should be stored locally. If it disappears we should reply to the asset request with
ImageNotInDatabasePacket
* However, last time this was enabled some clients started crashing. This may well no longer be the case and needs to be tested, but in the mean time we will store
the asset instead.
* This needs to be resolved in a better way, possibly by starting to send the ImageNotInDatabase packet again instead
When the avatar stops flying in mid air, it stays still
while it falls to the ground. Normally, the avatar would
use the falling animation (when it spins its arms and legs
while falling) until it reaches the ground.
The attached patch fixes the bug where when linking in a new set of
prims to an already linked set of objects the prims were placed at the
end of the list rather than just after the root prim. ie. link prim
order result was different on OpenSim compared to an LL server. This
causes a few issues with respect to compatibility of scripts,
especially when using llCreateLink.
* If a change is going to affect a unit test, then please could we change the unit test at the same time? Otherwise this will never get done
* It also seems a bad idea to disable tests which start failing unless there's a very good reason
The following should silently fail when attached,
llBreakAllLinks, llBreakLink, llCreateLink.
The following should be restricted to avatars in the same sim,
llGetAgentInfo, llSameGroup, llGetAgentSize, llGetAnimationList.
Comment added to the following unimplemented functions,
llGetAgentLanguage, llGetAnimation.
llGetBoundingBox is completely unimplemented. The attached
patch contains a partial implementation for single prim
objects and standing, flying and ground sitting avatars.
In the case of an avatar sat on an object or multi-prim
objects only the bounding box of the root prim is returned.
llRezObject and llRezAtRoot ignored any velocity parameter.
The attached patch makes use of it if it is not a zero vector.
Support of strength-slider in latest sl-client (1.21.6)
Added a patch, which includes the support of strength-slider
in latest sl-client (1.21.6) for Raise- and LowerSphere.
* This moves authentication from the client thread (where failure was difficult to detect) to the particular thread handling that packet
* I've kept the authentication outside of the crucial clientCircuits lock (though any delay here is probably swamped by the other delays associated with login)
* Also added more to the unit test to ensure this doesn't regress
* This checks that a client circuit is established when the udp server is given a use client circuit code packet
* And checks that other circuit codes do not exist
* Not sure why things still worked in the presence of this bug - possibly the problem is compensated for later on. If you are having udp session problems this bug fix may help
(though no guarantees).
logic to ConciergeModule. adding XmlRpc method to allow update of
welcome template for a region. documenting [Concierge] "password"
option in OpenSim.ini.example.
Attached patch protects against a NullReferenceException
in SceneObjectGroup.stopMoveToTarget (used by LSL function
llStopMoveToTarget). Thanks to M. Igarashi.
welcomes = /path/to/welcome/files/directory
a directory in which you can place welcome templates for concierged
regions (those regions that match the "regions" regexp). you can use
format substitution:
0: will be replaced by avatar name of the avatar entering the region
1: will be replaced by region name
2: will be replaced the name of the concierge
MemberwiseClone() also clones the "already backed up" flag, preventing prims
created by drag-copying from being persisted. If such a prim is made the root
prims of a link set, the entire set will not be persisted. Fixed now.
chat relaying via private channels, and old IRCBridgeModule
behaviour. also cleaning up IRCBridgeModule's OpenSim.ini
configuration variable names (still supporting "old" variable
names). refactored IRCChatModule into IRCConnector and incorporating
watchdog from IRCBridgeModule into IRCConnector.
enabling ChatModule to be used as a super-class and utilizing it in
ConciergeModule.
* Guys, there's an endless loop there *ON PURPOSE*. Please don't try to *fix* it. We must continue to process the UDP stream buffer on clients that disconnected nastily until it ends or the UDP server accept thread will die a horrible death.
* Unix epoch starts at midnight, not at 8:00am
* All date/time handling should be done in UTC in the server, not in
the local timezone.
* Refactor out repeated computation of a constant value
- Added setting of CreationTime to some places where inventoryitems
are created
This fixes Mantis#2390.
Add rezzing time to objects. Add Object return and traffic fields to land
database. Add plumbing for auto return. Implement auto return.
Contains a migration. May contain nuts.
* Implement the linear impulse portion of llPushObject. We should have a lsl compatible implementation of that portion of the push. Angular.. well. still have yet to implement a torque accumulator.
* llPushObject respects the region and parcel settings for Restrict Push, it also respects GodMode as is defined in the LSL spec.
* Regarding an earlier change, I think it would be possible to eliminate the creation of new IPEndPoints on every end receive if we did the client circuit lookup before starting
the next receive. However, this would be a performance trade off and hence not worth trying without performance testing
* This widened what I think is an existing race condition where asynchronous recieves could potentially stomp on each other's end points (though this must occur very rarely, if at
all, in reality)
* This allows multiple user profile providers to be specified in OpenSim.ini separated by commas
* If multiple providers are specified then a request for a user profile will query each in turn until the profile is either found or all have been queried
* Unfortunately I don't believe this order can currently be specified, which if true is something that will need to be fixed.
* Thanks to smeans for the original patch.
* Additionally, you can probably get more physical prim now together.. though, I think this puts us back on par with where we were in the beginning of the year on number of physical objects. Experiment. Make videos. Send Feedback. Enjoy.
- Added two missing caps (UpdateScriptAgent, UpdateScriptTask)
- Added one missing EventQueue event (ScriptRunningReply)
- Changed DNE and XEngine to use this new event
As we only use the mono engine anyway, the "Mono" checkbox is set by
default but doesn't have any function.
* If you are hosting many regions on a single instance, you will probably notice a decrease in region startup time and maybe a slight increase in performance.
* Single regions won't notice anything different
* I believe this is reasonable since code outside the Linden client stack shouldn't be aware of the packet format being used
* I would love to have made the method protected, but the LoadBalancerPlugin is still calling it and resolving that would require more work
* This should fix a long standing issue where you often wouldn't see other people simply turn around without moving at all
* Arguably lastPhysRot (to mirror lastPhysPos) is not a good name, may change variable names later
* This may help http://opensimulator.org/mantis/view.php?id=2377 where large linksets do not always correctly delete - since a lost kill packet to the client could result in
the symptoms described
* Re-enabled the native ODE prim types when possible
* Fixed several invalid assumptions in the prim recycle process.
* Added better message for 'reused a disposed physicsactor'
* Added a way to recover from errors during collision_optimized
* Added a way to recover from an error condition where prim_geom wasn't reset properly
* Calculate an agents height in LLGetAgentSize() from apperance parameters rather than physics avatar numbers
* Another good looking patch from idb - thanks!
* If you're experiencing knee bendiness try the windows settings, as the *nix settings seem to now be incorrect. (this update does that, but you may have your own opensim.ini settings active.
* Mac users, pray to chi11ken to make you a .dylib version
* This is semi-tuned and post teravus hack. (Though I didn't apply the terrain pitting fix hack. I'm still deciding if it's necessary as there was a lot of work over the past several months on the heightfield collider.
* Please use '--enable-shared --disable-demos --disable-asserts' if you are building your own libode in the configure step. Asserts are pretty much useless for use with .NET
* This also updates ODE.NET as, there were some API changes in May that were just added to ODE.NET today.
* Experimenting with the PacketPool mechanism.
* It's still disabled in the code, however there's now a flag to enable it.
* Converted to use Generic Collections vs Hashtables, also now uses a list of 'OK to pool' packets, starting with the high volume PacketAck packet.
* Implemented a proper update thread
* Removed the UpdateLock Mutex as it's no longer needed because updates can only happen one at a time now.
* This should actually improve performance significantly.. But, see the warning on the next line!
* Warning: If there are deadlocks that the threadpool timer method was hiding, this will expose them for all the nastiness they are.
See mantis #2379 for some useful scripts that work with this.
Note that I added another configuration parameter in addition to the patch to allow for legacy behavior in the absence of new configuration settings.
fix for the LandManagementModule. I changed LandSnapshot to use
CachedUserInfo to take a load off the user server. Also, missing owner
profiles are legit, warning removed.
XmlIgnored the SceneObjectPart.SitTargetAvatar property, as (afaik) this is only used to indicate that a avatar is sitting (or about to sit) on the prim.
And there are situations where it might not be cleared, like if a client crashes while sitting on the prim. Which results in that avatar's id getting stored in any xml backup or taking the prim into inventory. And then its always classed as a avatar is sitting on that prim.
* This was not a problem with objects consisting of less than 30 prims, since the extra schedules would be ignored
* However, above approximately 30 prims extra schedules would actually occur.
* For instance, a 140 prim object would end up triggering approximately 2500 ObjectUpdates to every avatar in range rather than 140
* Hopefully, this change will improve client responsiveness on deselect and was one of the reasons that the AgentThrottle restriction started causing problems yesterday.
The average-value of modify.ModifyBlock.Height in LLClientView.cs:4170
seem to be incorrect or it isn't the average? Mhhh...
So the terrain build -> Flaten Sphere is unuseable.
I have put in a patch that contains a workaround while
the main problem is not solved.
* Puts remote requests in a single worker thread
* Worker thread only starts when there are agents to serve
* When there are no agents to serve, it shuts down
* A good example of how to deal with threads in non-shared modules so they don't end up consuming threads per regions
If prim is part of SOG, then ask the SOG to update the
position, rather than asking the part itself.
Ghosted child prims should no longer result from llSetPos.
Not sure if this is the right approach for all cases ,
would appreciate feedback on the patch.
The attached patch fixes mantis bug 2312 (llGetPos() returns incorrect
values for child prims where the root prim is rotated). Regression
tests still pass.
Incidentally AbsolutePosition which was used before looks a little
suspicious to me as its always going to return the wrong value if the
root prim is rotated. GetWorldPosition does take the rotation into
account, but AbsolutePosition is used in a lot of places. Though i
don't understand why there is both GetWorldPosition as well as
AbsolutePosition so I've left the latter alone.
[i also cleaned up some indent problems, --- dr scofield]
Attached is a patch for LLGround which was just plain broken and could
cause a runtime error. It now returns valid data with valid input (ie
the offset does not take the position off the edge of the sim), but a
runtime error will occur if invalid data is given.
On invalid data the LL servers return the ground height based on a
valid point closest to the effective position calculated using the
supplied offset. Is the OpenSim convention to replicate the LL servers
as closely as possible? If so I can submit an additional patch to
replicate the LL behaviour.
If you use load-oar to transfer region data from one sim to another
then currently inventory items can be left with unknown owner
permission which results in them being no-mod/no-copy for
everyone. The attached patch fixes things up so if the owner uuid does
not exist on the destination system then it assigns ownership (and the
creator for completeness) to the master avatar id. This will make it
much more practical to share copies of regions :-)
* I believe this was the cause of the remaining packet_out_of_order messages in the Linden client logs
* There were race conditions where multiple clientstacks would overwrite each other's sequence numbers
* Changing network bandwidth in the preferences will now have a much more noticeable effect - a user may want to increase this if data is being slow to download from opensim
llSetLinkApha is not fully implemented and has not been updated
to use the recently added GetLinkParts and associated implementation
pattern as per llSetLinkColor and llSetLinkPrimitiveParams.
* Fixes 1 too large count in region you're in (Region no longer reports the green dot about yourself to you)
* For all local requests, the region will check itself instead of going to it's web service. (optimization)
Prevent EventAbortException inner exceptions of
TargetInvocationException being re-thrown from
OpenSim.Region.ScriptEngine.Shared.ScriptBase.
Executor.ExecuteEvent
Implementation of llModifyLand() and There is a bug on
permission-check of land-terraforming: x an y-coordinates
are interchanged on function-call ExternalChecksCanTerraformLand.
Correct: x is west, and y is north. 2) Missing check of
"Other allow to terraform-flag" (Parcel.ParcelFlags.AllowTerraform)
Introduce a resend counter on the ack queue. The header "Resent" field is
now obsolete. Implement 3 resends on reliable packets, variable.
Increase default resend timeout to 3000ms and default silence threshold
to 350ms.
* This revision also makes the exception catcher of last resort print to the log instead of just the console
* This means logs should now capture sim crashing exceptions, though not those which are caused by a crash of the virtual machine itself
* Resolve redundancy by removing the OpenSimBase check - if modules are recieve nini config directly they should probably be the ones to do the checking
Addresses llDie issues. The attached patch catches run time
exceptions that occur during method invocation (of type
TargetInvocationException) and exposes the internal exception.
This makes it possible to pass out the SelfDeleteException.
Also added handlers in a couple places to make sure that
exception was being passed out far enough to be handled
correctly. Tested on DNE.
* This patch aims to store look at data when an avatar logs off in grid mode
* However, in my short test it doesn't appear to be working yet - numbers are being stored but they don't look correct
* But this doesn't appear to cause any login problems
* Thanks tyre
instead of the 130s timeout somewhere. Additionally, mark the map-tile as
offline. This partly fixes the TP problems of Mantis 2332; the rest is a viewer
problem (just relogin).
- Added lookup in the data-layer
- MySQL works
- SQLite doesn't have a grid-db, so it won't work there
- I added MSSQL-code to the best of my knowledge; but I don't know MSSQL :-)
- Added the plumbing up to OGS1GridServices. This speaks with the grid-server
via XMLRPC.
- Modified MapSearchModule to use the new data. It's backward compatible; if
used with an old grid-server, it just returns one found region instead of a
list.
- Refactored a bit.
Note: This updates data, grid-server and region code. No new files.
Fix: objects being duplicated inventory on detach. Fix: Mad jumping around of
attachments while editing. Fix: Attachments being persisted to database on
login. Fix: Attachments being persisted when changed by a script like
invisprim refresh. Fix: Attachpoint set, but not reset correctly. Fix: prevent
spurious full updates while editing attachments. Several other fixes
* we appear to both setup a default configuration and provude identical defaults when we later try to read the values - this is probably not really necessary
old way: each region module interested in chat from client had to
- subscribe to scene.EventManager.OnNewClient
- then in its OnNewClient delegate it would subscribe to
client.OnChatFromViewer to capture chat messages coming
new way: ChatModule is the only region module that uses the "old
way" approach but is now forwarding all client chat via
scene.EventManager.OnChatFromClient
- each region module interested in chat from client now only
subscribes to scene.EventManager.OnChatFromClient
this not only simplifies code, but also allows us to substitute
ChatModule with derived classes (ConciergeModule is going to be one
example).
Also, this changeset changes ChatFromViewer to ChatFromClient as it
doesn't necessarily have to be a viewer that is a chat source.
i've taken great care to only comment out those OnNewClient delegates
that were only used for getting at the client chat --- hope it's not
breaking anything.
* Switched it on by default
* Updated OpenSim.ini.example to reflect this
* Caught a UDP Server issue that occurs when the network pipe is saturated
* Still experimental :D
In Second Life's implementation of llParseString2List(), all spacer
strings which occur within the source string are included in the
resulting list. In OpenSim's implementation, any spacers occurring
at the beginning of the string are discarded; furthermore, if multiple
spacers occur between non-spacer elements, or at the end of the source
string, only the first spacer is added to the resulting list;
the remainder are discarded.
Thank you, fusspawn, for an implementation of osGetSimulatorVersion.
This patch removes the llRequestSimulatorData(..., 128) hack and
implements the functionality as an osFunction.
regions in the in-world map. It currently only returns the first region that
matches the search string; in a future version it will return more search
results.
Note: File added; run runprebuild.
* This actually probably doesn't make a huge difference. We still end up resending a massive number of packets in quite a few situations, but it's not easy to consistently
reproduce this.
* Might really need some throttling of packet send to the client on the OpenSim end.
* This is a HUGE update.. and should be considered fraut with peril.
* SSL Mode isn't available *yet* but I'll work on that next.
* DrScofld is still working on a radical new thread pump scheme for this which will be implemented soon.
* This could break the Build! This could break your Grid!
A number of the deprecated functions had missing parameters
causing compile errors. These included:
llSound, llMakeExplosion, llMakeFountain, llMakeSmoke,
llMakeFire, llPointAt, llXorBase64Strings, llSetPrimURL
OS/SL script conformance, implement llSoundPreload and
llRemoteLoadScript to behave as in SL. In SL
llSoundPreload appears to do nothing. In OS
llRemoteLoadScript shouts an error when invoked
"Deprecated. Please use llRemoteLoadScriptPin instead."
* This is an initial basic experimental code for inventory import and export from the region server
* Probably not yet ready for general use
* Thanks Kayne!
Estate/ Manager Owner Uses the Region/Estate Menu Region TAB,
and uses "Teleport Home All Users..." (Action Button), the
action will complete but no one will be teleported and all
users still function in the region ok.
- Added TeleportFinish event to the event-queue. It works better than
before (you can teleport), but it doesn't work quite right yet (you
start TPing after the TP again).
Beware: Still experimental and non-working.
The current llGetLinkName returns an empty string if a prim
with the given link number is not found in the link set. In
SL an empty string is only returned if the prim name is actually
blank, a NULL_KEY is returned instead with a couple of exceptions.
* If EventQueueGet is enabled, use that instead of a few UDP packets, if it's disabled use the UDP packets like normal.
* We *really* suggest users do not turn on EventQueueGet yet.. as it's highly experimental, broken, and resource intensive
* Updated OpenSim.ini.example
* Testers of EventQueueGet.. in OpenSim.ini, it's in the [Startup] Section.. change EventQueue = false, to EventQueue = true.
* returns FAKEEVENT instead of the connection returning a 502. It doesn't like our 502's for some reason.. so, in leau of this.. send it a fake event.
* Once again, this is still 'really early' code, so please don't blame us if you have no more threads left.
* This won't function yet as far as the client can tell.. because it doesn't respond to the first query with a 200 message.
* We have to figure out how to encode those binary values in the example code in the module...
* Committing this so we have a start point. Will continue to work on this more today.
* This means that saving notecards in prim inventories should now work.
* Not the nicest code in the world - the transactions system is pretty fugly right now
* PLEASE NOTE: Currently, the prim will not repersist until up to 15 seconds after it is unselected.
* What we really need is a proper mechanism so that any prim updates still waiting when the simulator is quit are performed before exit.
DNE and move all of DNE into the DotNetEngine directory. Remove references
that would cause the script runtime to load the entire engine + scene into
each script appdomain. This might help DNE memory consumption.
* It seems kind of silly to be building a 256x256 array just to use two 16 float blocks.. but for now the layerdata routine requires it so we'll go along with that.
* We only fill a 32x16 area of the 256x256 float array with data.
* We use patches 0,0 and 0,1 for the first and second patch to determine the direction and magnitude of the wind.
The binaries are still different, but that is only a small step away now.
The OSSLPrim has been removed. This commit will breal all scripts
using Prim.Scale(), etc, syntax. It was not secure and will have to
be brought back in another form.
Scene. Make the script engines check that the engine name in the
//Engine:language comment is a valid engine and treat it as a normal
comment if it's not.
//DotNetEngine: needs to be written as //ScriptEngine.DotNetEngine: now, since
that is it's real internal name. //XEngine: still works
Check the client dialog box (from top menu) WORLD / REGION ESTATE
/ REGION tab. The client dialog box seems to have a hard limit of
about 32 characters per line available for displaying the region
version number. Our regions are sending a string which is greater
than the limit, causing the client to wrap the text and look ugly.
* A little wind wouldn't hurt anyone, right? This is the 'slightly breezy' setting.. hopefully you won't notice 'much' of a difference.
* It turns out the terrain patch routine is similar enough to the wind version that it can be used to hack together a breeze generator with a few mods.
* Not much configuration.. yet. You only get breeze updates in the general vicinity of your camera now to keep bandwidth usage down.. and we're not talking about 'much' movement at the moment.
* initial version... could use improvement I'm sure.
The entire LSL API is now in the single, shared file
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api_Base.cs
This is for both engines. The OSSL function are still separate.
and makes it use a common set of types in both engine. Fixes the issues with
running both engines and HTTP requests / listens / timers etc..
Also fixes a couple of minor Scene issues and a CTB by nullref.
Active gestures are sent as part of the login-response. Added
fetchActiveGestures to SQLite and MySQL; added an empty one for MSSQL and
NHibernate. Using the empty ones won't cause errors, but doesn't provide
persistence either, of course.
all methods needed outside the API ststic. Async command processing
is now wholly internal to the API. This sets the stage for the next
convergence step.
of the types, located in OpenSim/Region/ScriptEngines/Shared/LSL_Tyoes.cs
Also changes the compiler in DotNetEngine to use that. You _will_ need to
let your region recompile all your scripts!
Thank you, tyre, for a patch that refactors LSL to use a unified set of
method signatures and type names, reorders methods and removes unused
and adds new method stubs.
for inventory REST calls for the time being, as firefox, curl, and
also python's urllib2 cannot authenticate using digest auth.
fix permission checking for prim inventory to be the same as for
normal edit ops.
ordinary region modules and are able to coexist in one instance.
See http://opensimulator.org/wiki/ScriptEngines for details. There were
changes to OpenSim.ini.example, please note DefaultScriptEngine.
Also see the User docs and FAQ on the Wiki. Default is DotNetEngine.
* if a packet was really null it would be caught by the general exception handler at the top of the client thread, which would also provide more information and attempt a clean
shutdown
- Conformance fix: If the notecard can't be found, shout on DEBUG_CHANNEL as the docs state
- Bug fix: Don't let llGetNotecardLine throw an exception on freshly created notecards
* you'd think from all this that I was one of those fanatically tidy people. I can assure you from looking around my bedroom/study that this is not the case :)
* On script rez, XEngine was taking an m_scripts lock and then later on an m_parts lock when looking for a part by local id
* In the meantime, a scene object being deleted would take an m_parts lock and then later on try to take an m_scripts lock when it tried to trigger script removal
* There may be better ways to resolve this, but I believe that in general, we must always take an m_parts lock before an m_scripts lock
* There was a small window where region logins were allowed before modules were loaded - avatars logins that hit this window could have caused bad things to happen.
* A similar change will follow for grid mode sometime soon
* Monitors / for getting the seed cap for rez_avatar/request on application/llsd+xml && application/xml+llsd && !application/xml
* Experimental, this might break LibOMV temporarily.
- Add necessary dummy Dispose-methods where they are missing
- Implement the SQLite Dispose-methods
(currently only used for unit tests, in the next commit)
Correct a condition where a prim is linked before it has been persisted
for the first time and is then persisted through it's former SOG with
a bad offset position.
XEngine: Change a number of methods to use the new link part method.
Fix ALL_SIDES for llSetColor, llSetTexture, llSetAlpha, llSetPrimitiveParams,
llGetPrimitiveParams(PRIM_TEXTURE, PRIM_COLOR).
XEngine fixes: prevent queue overruns, prevent spamming when no key
is down. Release controls when conflicting permissions are requested
or permissions are refused later. Release when prim or script are deleted.
Fixes Scene script instance deletion semantics.
New patch (terrainedit2.patch) is attached that passes unit tests (
and in fact supplies the new unit test to pass..:) The previous
failure was due to the change of the brush size to be linear instead
of exponential, and the fact that the test parameters were assuming
the exponentional brush size.
This patch also removes dependency on 'duration' argument for
adjustment step size. This should address the widely differing reports
of instability with terrain editing.
Note: 'doing this right' implies ultimately reading the parameters
from the ini file, which this patch does not do.
* the methods were identical except that the Properties one did a check for the user profile beforehand. However, every caller was doing this already anyway.
fixes the terrain spikes, and is the result of mostly a tuning
operation on the smooth and flatten tools. I dug in and found that the
spikes apparently result from smooth's overly aggressive iteration
steps toward the average curvature, which leads to an instability that
blows up the heights. I introduced a scaling factor to dampen the
'duration' parameter which tames progress and seems to keep things
stable.
* There are still a lot of things that are hard coded to use http. They need to be fixed.
* Also includes directions
* A standard junk PEM file to append to app_settings/CA.pem in the client so SSL will work
Moved intialization of appearance from the SendInitialData
event handler into CompleteMovement handler. That ensures
that m_appearance is initialized before the inventory is
retrieved (so there is a place to check on attachments).
after using llTakeControls my sim receives about 200 messages per second,
l of which get queued , this could be because there is no lag as the viewer
and sim are on the same computer. The patch I have included checks to see if
the "Changed" param is 0 then searches the EventQueue for Control messages
being sent to the same localid, if it finds a message already in the Queue
and Changed==0 then the new message is only notifing you the key is being held,
since there is already a message the new one isnt needed so it isnt added
to the queue.
works. Also makes llGetFreeMemory return the constant 16384.
LLGetFreeMemory is useless in SL, as it never goes up, only down.
So, the only thing it is used for, in practice, is to detect an imminent
stack/heap collision, a danger we don't have.
Remove some unused osFunctions that were left in the LSL function
file from the separation way back when. Inline the osSetParcelMediaURL
code to get rid of the osFunction. Really need to add a way for one API
to call another.
functions return CLI strings, which, in the case of lists, don't
get wrapped. Therefore, the list had to be able to deal with
that CLI type here. The correct fix would be to change all LSL
function returns to LSL types.
* Patch attached that adds the check for uninitialized appearance when inventory items are received and processed. Also attempts to ensure that appearance is initialized even
when the profile cache has not been built.
* This will not fix the race condition, but should at least remove the unhandled exception that is being reported in Mantis 0002126.
* Thanks cmickeyb
* This patch aims to introduce look at direction persistence between logins. It won't be active until the second part of the patch is committed in about two weeks time. At
this point, region servers that haven't upgraded past this revision may run into problems
* This checkin upgrades the user database. As always, we recommend you have backups in case something goes wrong.
* Many thanks to tyre for this patch.
* From looking at the code there shouldn't be any difference, and this appears to speed up prim loading and make a certain failure case (where prims seem to be going out of
bounds on startup) less of a problem.
* However, if I've been bad please revert this patch
couple of debug statements for null items while we
diagnose our interrmittent inventory issues. I looked
at this and it seems helpful to others. We can back it
later if desired.
Thank you, ralphos, for a patch the adapts llSetColor and friends to
a change in the underlying types.
Also, thank you for a much cleaner way of casting types out of
lists, which I will adopt throughout.
Floating text, Rotation, Texture animation, Particle System
This will make "Eye Candy" scripts work without modification in
XEngine. The use of the CHANGED_REGION_RESTART hack is no longer
needed. Implemented in MySQL only, hovertext also in SQLite.
* Please note that this implementation has not been mathematically verified to be correct-as-described, it is probable that this implementation may produce differing results to Linden Lab. Testing (and test data) would be appreciated.
duplicate delivery of state_entry if a region is restarted just after
saving the script. Changes script state saves to no longer abort long-
running event handlers. Queues the save instead. Adds shutdown handler
to save script state on irderly shutdown
* Now it should properly inform the user and stop a login if a region server could not be contacted in order to expect a user (the last commit didn't actually quite work correctly)
* These are different types then the OMV types because changing them causes just about all grid comms to break. If these were the libOMV types, then libOMV couldn't change them ever again after that.. or we'd have a breakage whenever they changed them.
* This might introduce a map issue. Still checking it out.
* Testers, please try rezzing your inventory on this revision and sending me feedback in mantis.
* Users, it's not time to update yet. The dust still hasn't settled.
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
Thank you, openlifegrid, for a patch to move new user connections to
thread pool threads.
Reworked by me to fit current trunk.
I believe that that patch may be beneficial in reducing the cases
in which regions become unresponsive and will no longer accept
new logins.
Types extracted from a LSL_Types.list have to be down-cast initially
to the exact type of value type object that the Object actually is.
This would make for very cumbersome, ugly code when extracting list
parameter items in ll functions where a few implicit conversions
should be applied such as key -> LSLString and LSLInteger -> LSLFloat
(but not LSLFloat -> LSLInteger). This patch adds a set of GetXXXItem
member functions to the LLS_Type.list class, where XXX is the name
of the LSL_Type to be extracted: LSLFLoat, LSLInteger etc. All take
a single, int parameter that is the item number to be extracted.
If the parcel pointed to by the landmark has nothing in the
Description field (of the General tab in About Land...), a
NullReferenceException is thrown and the client is logged out.
I added a check to the calls to Helpers.StringToField() in OpenSim.Region.ClientStack.LindenUDP.SendParcelInfo to avoid
this issue.
Eliminate gretuitious KillObject packets. KillObject is sent to the
viewer for the root part only.
Also prevents the full update on deselect that makes a deleted object
reappear and stay visible until the background deleter got around to it.
We still send 2 KillObject packets for the root prim, that could be
avoided only at a cost in reliability. One packet seems an acceptable
price to pay for consistency.
The attached patch fixes connectivety checking of root- and
child-agents. If an agent's client isn't sending any packets
for some time (not even to StartPingCheck packets), we assume
that we lost connection and try to log them out.
Due to the many problems with not cleaned up child-agents, I thought it
might make sense to be able to see them on the console. 'show users' on
the region-server's console now outputs root- and child-agents (with
"root" or "child" column)
1000 chars to avoid the exception thrown by libomv at 1100 chars.
Change string->int conversion so it copes with non-numeric chars
after the number and no longer uses a float to parse the value.
It wraps constants in new LSLType(x), so that lists with
constant values are processed correctly. Contains changes to
the lsl.parser.cs that are not (yet) reflected in opensim-libs,
since this experimental patch affects XEngine only. Also contains
nuts.
* Unpatched code certainly looks bizarre - attempts to add a new client if we encountered a failure in processing a packet. No apparant ill effects on a sniff test.
* Thanks openlifegrid
* a couple more remain that preferably the original coders should look at in more detail (obsolete warnings in the ogp module and not overriding warnings in the script
engine)
* TimeStamp field of the AgentMovementCompletePacket in LLClientView.MoveAgentIntoRegion contained a fixed number. The attached patch changes this to a current
timestamp.
* Thanks HomerHorwitz
* You can replace "grid" as the asset system with "file" to save and load all your assets from a directory on your hard disk. Files are serialised to XML and saved in the format "/<dir>/0x/0x/0x/0000-0000-000000-0000-0000.xml"
* Directory <dir> is sharing the Asset Server URL path, use a normal path here instead (ie C:\xyz or /var/assets/).
* This probably wont work well in grid mode unless every sim has access to the same directory. This is mostly intended for standalone usage where quick and convenient access to assets is required.
Addresses the problem of ghost avatars. The problem was child-agents
sending data. Due to symmetry reasons, I considered that wrong.
Whenever an avatar A1 in region R1 looks at avatar A2 in adjacent
region R2, we have two possibilities to communicate: A2-root sends
to A1-child (both in region R2), or A2-child sends to A1-root
(both in region R1). Currently, the children send data in some cases,
and I guess the viewer gets puzzled about that and switches the child
to root as consequence (at least partly), so it becomes visible.
Found that during my ghost-hunt: Add some logging and you see that the
counting down happens twice (once at the place that is removed by the
patch, and once caused by the actual removal of the root-/child-agent
during LLClientView.Close). With the patch applied, I end up with correct
numbers, i.e. with 0 roots and 0 children after everyone has logged out.
which is a thin wrapper around a IWorkItemResult from the SmartThreadPool.
However, it is very easy to reimplement on top of basic threading and therefore
makes the IScriptInstance class independent of the specific threading
implementation.
engines that want to use the XEngine's instance handling and state
persistence can do so. IScriptInstance is optional, but it does
require the SmartThreadPool if it is used.
Issue is caused by the terrain height not being queried before
teleporting within the region. Teleporting between regions is
correct. Adding the neccessary checking to intra-region TP code.
* When OGP is active, disable SSL certificate chain validation. I'll add more options here to come, as well as a way to test against a group of known certificate subjects.
* The purpose of the check was to ensure that your home region was sent to your client properly when you connected. However, the desired result is that if the home region is down, but the destination region is online, the user should still get in.
* Changes: if the home region isn't available, set the message to the client so that the home region is the destination region.
This patch adds even more LSL compatibility to llSetPos() As stated in the
wiki http://wiki.secondlife.com/wiki/LlSetPos, [^] movement should also be
capped to 10m per call for unattached root prims.
Beside this issue the attached patch adds (hopefully) all known LSL script
delays (as ScriptSleep(), but still commented out) to LSL_BuiltIn_Commands.cs
and LSL_Api.cs and a lot of format cleanup.
at 1.0, it allows delays to function as coded. Smaller values will
reduce, larger values will increase the delays. A value of 0 is
permitted and results in on delay being applied.
Thank you, salahzar, for a patch that corrects the behavior
of PRIM_TYPE in llGetPrimitiveParams() and improves LSL
conformance in llGetNumberOfSides();
* There are a lot of changes and this is quite experimental. It's off by default, but you can turn it on by examining the bottom of the opensim.ini.example for the proper OpenSim.ini settings. Remember, you still need an agent domain..
* Furthermore, it isn't quite right when it comes to teleporting to remote regions (place_avatar)
The version of llSetLinkPrimitiveParams in LSL_BuiltIn_Commands.cs
has not been kept in sync with the additional functionality made
recently to the llSetLinkPrimitiveParams implementation in
LSL_Api.cs which includes support for setting glow, full bright and
other privative parameters. A patch to LSL_BuiltIn_Commands.cs is
provided the incorperates this functionality (duplicated).
animation, target omega, looped sound, script access pin, allowed
drop state and sale data. Loads it, too. Not all tested.
Code: No Nuts. Data: Cannot Guarantee Nut Free.
also enable LSLconformance on some texture functions as well.
Applied the part of the patch in Shared/.
The part for Common/ needs to be reworked to remove the reference
into Shared/
It is now possible to use module interfaces without referencing Scene.
Place those interfaces in OpenSim/Region/Interfaces. They may not
use any refs from OpenSim.Region.Environment as parameters.
This resolves a circular library ref introduced in r5949
* By default, texture rendering is on. This may be affected by using secure assets since your region hasn't registered with the gridserver before it asks for texture assets. It might also be affected by a slow asset server, so consider this release experimental.
* Defined interface IMapTileTerrainRenderer.
* Extracted "old" shaded maptile terrain rendering into ShadedMapTileRenderer;
streamlined it a bit and added "highlight" rendering to its "shadow"
rendering.
* Added "new" terrain-texture based maptile terrain rendering
(TexturedMapTileRenderer); made TerrainUtil.InterpolatedNoise public
* Adapted MapImageModule to allow switching between those two by configuration
* Added configuration option to OpenSim.ini.example
This patch improves LSL conformance by inserting a 0.2 second delay
into llSetPos/llSetRot, as the function specification states.
Thanks to M. Igarashi for the patch.
the first part of gesture persistence.
----------------------------------------------------------
Attachments no longer vanish on walking crossing. Teleport is still
problematic, but will now be blocked with message "Inconsistent
attachment state" rather than losing the attachment. Detach to be
able to TP in that case.
Change user server to handle attachment assets record properly. Ensure
that attachments are not re-rezzed on region crossing. Persistence
will NOT WORK with earliser UGAI!!
Change region server to match.
* Refactored a few things in Scene to make maptile saving easier to understand.
* Added comments to describe the 'clever code' assetcache update without the gridasset being updated so as to lessen possible confusion in patches in the future.
* If the MapImageModule isn't loaded, default to the code in Scene still.
* The primary immediate use is to provide a means of temporarily reducing log output on the console when executing console commands
* Changing the log level on the console is not permanent and does not affect the log information being put into OpenSim.log
* This could have been done by putting in a threshold level on the Console appeneder in OpenSim.exe.config and implementing config watching in the code.
* But I think that it's a little more user friendly to make this doable via the console.
Type casting the normalized vector 'lookat' to int results to <0,0,0>.
This patch also adds an overload to RequestNeighbourInfo (currently unused)
that will come handy for some features I'm working on.
Places touched:
- Added two events for in-packets to LLCLientView: RegionHandleRequest and
ParcelInfoRequest
- Added sending of two out-packets to LLCLientView: RegionIDAndHandleReply and
ParcelInfoReply.
- Scene handles the RegionHandleRequest, LandManagementModule the
ParcelInfoRequest
- Added inter-region request for LandData by RegionHandle and local position.
This was implemented as XML-RPC request. The returned LandData isn't
complete, it only contains the data necessary for answering the
ParcelInfoRequest
- Added new CAPS (0009) for RemoteParcelRequest and some methods for LandData
handling to LandManagementModule
- Added methods for fake parcelID creation and parsing to Util
- Fixed missing implementation of interface methods.
- Added new file:
OpenSim/Framework/Communications/Capabilities/LLSDRemoteParcelResponse.cs
NOTE: This is part of the patch, too.
Due to the many places touched, I would consider this patch as experimental.
the database is now intepreted as follows: low byte = user flags.
Next byte, low nibble: Deternines the text (Resident, Lifetime, etc)
shown. No customn text support yet.
hierarchical rights structure. MasterAvatar: Owner of the region server
(may be null), net gods (users with GodLevel 200), Estate owner
(from database). Look at Opensim.ini.example to enable net gods.
Estate owner will default to master avatar.
The following patch makes some enhancements to loading/saving the Xml2
format.
- Add streamed version of functionality for saving prims to Xml2
format. The streamed version (optionally) allows for saving the
prims whose positions appear within a particular bounding box.
- Expose stream versions of LoadPrimsFromXml2 and SavePrimsToXml2 in
the Scene class
- Extend loading from Xml2 (the streamed version) to optionally start
scripts for the loaded scene objects)
* Yield Prolog 1.0.1 Released : it passes all but 9 of the
421 tests in the ISO Prolog test suite (97.8%) .
* support dynamic predicates and rules.
* support 'import' to use external static functions
improves connection to C# functions
* Matches Yield Prolog r831
* This is being done by preventing close from being called twice on child agent closure (nres which would have been thrown are being swallowed).
* However, it should be possible to do much better cleanup on this code in the future
occasionally, but are fixed on restart (issue 1919).
This patch introduces the following changes:
1. when a user teleports out of Region A, remove that user's profile
from the Region A user profile cache
2. when a user crosses between regions out of Region A, remove that
user's profile from the Region A user profile cache
3. the user profile cache's session ID member can now be set (written),
and is updated each time a connection with a new avatar is established (ie: a
new avatar enters the region)
4. when a region server looks up a user profile and a cache miss
occurs, fetch the user profile from the user server first instead of
immediately returning null
ScenePresence. Pace prim delivery to about 200 updates/s max. Break
a long-held lock that caused the notorious MapBlockQuery XMLRPC timeout
on agent login. Eliminate 60 second timeout at "Waiting for region handshake".
Fix region crossing/teleport response. Fix appearance in primmy regions.
llRezObject changed to llRezAtRoot. llRezObject implemented
to call llRezAtRoot until I can figure out how to calculate
a bounding box. Partial implementation of llPushObject
(no angular impulse applied)
In case you run the server with mono --debug OpenSim.exe
line numbers are reported as <filename>:<linenumber>, so no
"at line" is found. That led to an exception, which is caught
since r5766. The attached patch fixes this for mono;
Bringing in an old private patch, increasing region registration timeout
to 90 seconds. That allows regions witj > 10000 prims to register
successfully. Running them.... well, YMMV
* If there's a Socket.AlreadyInProgress, just silently ignore this one
* Tried to refactor the Reset and BeginRecieve logic into something a little more readable, little less duplicated
Increase GetUserProfile timeout from 6 to 30 seconds. Because
the worker thread fo the XMLRPC data pump sits on a lock
while the system starts, regions with upwards of 6000 prims
throw and exception when that thread gets blocked for more
than 6 seconds, due to this timeout, and won't start.
When a region is re-registered (e.g. because of region restart),
it is removed from m_regions. If I understood that correctly,
the old entry should be replaced, instead.
This fixes a sitting problem which popped up on loading regions from
archive and turned out to be caused by the fact that the archiving
mechanisms all preserve the sit-target information that is set in the
object at the time the image is captured. This caused the new region
to pick a sit-target prim that did not correspond to the prim on which
the script was running, so the script's changed event is driven with
an invalid avatar UUID.
I have modified the ArchiveReadRequest class so that any sit information
that survives the archiving process is deleted before the object is
instantiated. This change has just been checked in.
* From the logs, I'm guessing probable cause is that an exception generated by a bad index given to substring error line number conversion stopped the script being killed, leading to continuous events that filled up the log (maybe)
* Someone will need to go back and fix this properly
* If a text string is too long we actually need to truncate to 254 chars rather than 255, since the Helpers.StringToField conversion will stick a \0 on the end
Forces the landmark and menu flags to be always set, like in previous
releases. This will cause the parcel based restriction on setting
landmarks to have no effect, until it is implemented properly
Adds the new access semantics and the new flag (allow only age verified)
Plumbs in the abuse email address from sim to viewer. The other way around,
libomv appears to be lacking support for the data field in the packet.
Includes a migration, run prebuild!
* May resolves inventory problems that occur when the user moves between two regions`
* e.g. if the user moves to a second region, adds an inventory item, moves back to the original region then tries to manipulate that item
* Not yet implemented for teleport
used in scripts
-cast from bool to LSL{Integer,Float,String} so functions such as `integer
isZero(integer x) { return (x == 0); }` work
-progress on issue 1863
The following is a patch that causes the ensuing http_response event (after
an llHTTPRequest) to include the HTTP status code returned from the server
(if available). The patch also sets the body parameter for the
http_response event to be set as the status description returned by the
server.
Changes erroneous return value of llGetLinkname() to "" for nonexistent
prims. Corrects an issue where the root prim of a linked set, upon
delink, retains the part number 1.
* This should stop the problem where linked prims loaded via an archive did not survive server restart
* It may address mantis 1819 though the symptoms don't look consistent
The LL Server sets the CreateSelected flag for a prim when sending a
property update when objects are linked. The following patch
gets OpenSim to do the same.
The problem I noticed is that when child prims are selected unlike
the Linden server, OpenSim does not return property information - it
only searches the root prims for matches.
What I'm not sure about is whether the parcel prim count taint should
be set or if the root prim should be set as selected (doesn't
seem possible to set the child prim as selected). It does
however fix the problem of the property information
not being sent, so its an improvement (I think!).
resending, timeouts, packet discarding. Add notification event for
packet discarding. Add priority scheduling for packet queues.
Add outgoing duplicate detection facility. Correct packet sequencing.
Make provisions for automatic server side throttle adjustments (comes
in next installment)
* This should allow multiple copies of an archive to be loaded into different regions on the same region server
* This shouldn't affect existing operations.
Terrain revert using the PaintBrushes appears to work OK,
however when using 'apply to selection' the RevertArea
FloodEffect calculates the revert height incorrectly
unless the strength passed in from the viewer is 1.0
Attaching a patch to correctly reset the selected area
to the heights in the revertmap.
Add a test event handler (which would fire after a minute if a terrain packet hadn't been acked) to scene to handle the OnUnackedTerrain event, which currently just resends the terrain patch.
The idea of this packet tracking is for the region level application to be able to know if the client stack gave up on sending a packet.
I found a problem trying to get s value directly from a quaternion q.
Compiling a script which directly access to q.s value, caused the
following error:
CS0103: 'The . symbol cannot be used in LSL except in float values
or vector components'. Detected around: q.s
I did a small change to allow alphabetic letter "s" to be interpretated
as valid identifier. This solves the problem.
* refactored some member names for readability and ccc (code convention conformance)
* took away two refs from Rest.Inventory since
* System.IO is part of System
* System.Xml.Serialization is part of System.Xml
llAxes2Rot now implemented. Important note: quaternion <x,y,z,s>
is equal to <-x,-y,-z,-s>. The result may be different from LSL
output, but it is correct. A problem of rounding caused an error
of square rooting of zero as negative number, corrected by squaring
again. Function tested 360° along 3 axes. Vector fwd, left and up
have to be normalized.
crossing is also a sim crossing. Prevents the CAPS handler from being set
up for a banned user,making them redmap out.
Dirty hack, temporary until I can work out how to do it right.
Implements additional unlink modes (unlink root prim from link set, some
multi-set operations). Linking (single and mutiple) fully implemented.
Consistent numbering of links while in world. Link/delink with predictable
link numbering. Correct link numbers in LSL.
Not all multi-set ops implemented. Link numbers still change when taken and
re-rezzed.
llRot2Left and llRot2Up functions modified, using fast algebric
calculations instead of vectors and quaternions products.
The accuracy is the same. Normalization is now implemented.
Returns true whenever the LLUUID references a user who is either an EM or
the region owner.
Please note that ownership is region-scoped, while EM is estate-scoped.
Makes the estate dialog fully functional. Implements all client facing functionality. Moves estate data from estate_settings.xml, which is used to provide defaults, to the region data store. Creates one estate for each region, and places the region in it. Converts all region bans to estate bans.
llRot2Fwd function modified, using fast algebric calculations
instead of vectors and quaternions products. The accuracy is
the same. Normalization is now implemented.
The previous implementation of llEuler2Rot was not mathematically
incorrect, but it was an awkward way of posing the problem that
led to a few degenerate cases which were not handled correctly -
for example, PI rotations around X and Z axes were wrong. I put
some comments in the source about how I arrived at the current
implementation, which I think is easier to read, and gives
results that match SL.
When using math operators +,-,*,/ in an LSL script with an LSLFloat
and an integer literal the wrong result is returned. This patch
adds operators to the LSLFloat type to handle this case.
I needed to apply the patch a little better then last night
for: Dot product operator in LSL_Types.cs incorrectly returns
a component-wise vector multiplication; it should return a
scalar dot product. Thanks to M. Igarashi for the patch.
* Potentially useful for diagnostics without needing to log in a client
* Packet queue statistics commented out for now pending a better way to cope with the information overload
Dot product operator in LSL_Types.cs incorrectly returns a
component-wise vector multiplication; it should return a scalar
dot product. Thanks to M. Igarashi for the patch.
* See http://opensimulator.org/wiki/OpenSim_Archives for more details.
* These commands can now be used on an experimental basis. save-oar saves the entire current region (prim data, assets, prim inventory items, terrain) to a single tar.gz file.
* load-oar loads an opensim archive and entirely replaces the current region (at the moment).
Patch 7 of the region patches. Finish off the region parts of the estate dialog. Full user functionality. Terrain textures, heights, water, avatar counts, prim bonus, debug settings and region toggles can now be set from the dialog on a per-region basis. Estate stuff defaults to sane values where there are no defaults, to estate_settings.xml otherwise. Sun still b0rked :(
Make all of the toggles go live. Utilizes the new database table for almost everything. Remove lots of now unneeded settings from the EstateSettings class
Changes the permissions module to make scripts permissive only when intended
Adds security checks to asset transfers to prevent hacked clients fron
requesting script sources.
Adds security checks to llClientView to verify all aspects of ownership
and permissions for inventory based script retrieval.
Small prims now get a full mesh if they are physical
Fixed a logic bug that was preventing many prim meshes from having excess memory cleaned up
Switched to more conservative method of vertex and triangle list trimming to prevent possible crash
Add a config option to OpenSim.ini to select between script compilers
in the XEngine without recompile.
Set UseNewCompiler=true in OpenSim.ini and try it out.
Creates the ICodeConverter interface and adapts the new compiler to it.
* This will work as long as those servers are actually registering any threads they use (does not include stuff plucked from the thread pool)
* command is now "show threads" rather than threads
This patch limits the maximum size of prims that can be created using libsl bots
or modified clients to 65536mper side. It also limits LSL functions to that size.
If a prim is already physical, the enforced constraint is 10m.
A prim that is larger than 10m cannot be turned physical, either via script or UI.
Linksets are handled correctly, so scaling of physical linksets is constrained by
the size of it's largest component prim. Also, turning linksets physical is based
on the size of it's largest ptim.
LSLInteger + literal integer is not an LSLInteger.
The included patch fixes the issue: LSLInteger + literal
integer is not an LSLInteger (also fixed for -,*,/)
added void osSetParcelMediaTime(double time) command to script engines.
which sets the position of the media that is playing. Time is in seconds.
Doesn't do any security checking (should be checking that the object/script is owned by the parcel owner). So could be abused, if it is then we should remove it, or add the security.
Only tested in dotnet scripting engine, but should work in XEngine too.
UserManager.UpdateUserProfile(UserProfileData).
Adding UpdateUserProfile(UserProfileData) to IUserService interface.
Adding RemoteAdminPlugin.XmlRpcUpdateUserAccountMethod(...) to provide
a remote update capability.
In LSL, the state command should have an immediate effect.
The OpenSim script engine seems to wait until the function
ends to process the state transition.
* Certain terrains which are fine went patches are sent singly cause a libsecondlife failure when patches are sent in batches
* See http://opensimulator.org/mantis/view.php?id=1662 for more details
up the sit target usage until the sit target fix patch goes in, but it should
be cleaned.
Get prims table mappings to the point where nhibernate likes them enough
to start.
Remove field from asset mapping so it will start
This patch adds the ability to set the prim type using llSetPrimitiveParams().
Seems to work ok, but there are a staggering number of cases to test,
so I have not yet tested them all.
* Migration should be automatic on sqlite and mysql
* Migration is not automatic on mssql, you will need to drop the invType column manually
* Migration should be fine, but as for any db change, I would recommend making sure you have backups before moving past this revision
It would appear that calling llResetScript() in state_entry() causes deadlock of region.
Probably due to llResetScript calling state_entry again. llResetScript should see who called it,
and not recall state_entry() after a state/variable reset. Once this script is in a prim,
the region/world/debug/script window shows it consuming the server (from 2,400 to 800,000 milliseconds).
The 1st "GetAvatarAppearance" *always* fails and returns default
avatarappearance. Avatarappearance seems to be working well because
the 2nd "GetAvatarAppearance" gets the right appearance.
Another new OSSL function for returning the name of the script engine
currently running, osGetScriptEngineName, added to both DotNet and XEngine
OSSL API.
Justin Clarke Casey