number map. Instead, write the map to a file for later use. That is not
yet used, so currently runtime errors after a sim restart will have wrong
line numbers
Attached is a patch which enabled through an OpenSim.ini option the ability
to read long notecard lines. Currently although the data is read from
the notecard it is truncated at 255 characters (same as for the LL servers.
This patch allows the setting of that limit to a different value.
; Maximum length of notecard line read
; Increasing this to large values potentially opens
; up the system to malicious scripters
; NotecardLineReadCharsMax = 255
this allows for save/restore functionality using notecards without
having to worry about very short line length limits.
Attached is a patch which provides osAvatarPlayAnimation() the ability to
also trigger animations contained within the same prim as the script, as
llStartAnimation() does. (It also modifies osAvatarStopAnimation(),
otherwise the script wouldn't be able to stop animations it had started.)
* In most cases, the setting in OpenSim.ini.example is taken as the canonical one since this is the file virtually everyone ends up using
* OpenSim will start up with a blank OpenSim.ini, in which case sqlite is the default database (as before)
It's good practice to isolate unit tests so their outcome (pass/fail)
does not depend on whether another test has been run/passed/failed. A
method is used to populate the DB independently for each test, and a
TearDown method cleans up the database after each test.
Also adding extra comment in C-style comment test.
Also truncate messages that may exceed the limit set by the packet size. The limit in OpenMetaverse is 1100 bytes including a zero byte terminator.
Fixes Mantis #3244
llSetHoverHeight() should not clamp the x/y position of an object the way MoveTo does,
and it should recalculate the absolute height to hover at as an object moves to reflect
the current ground/water height under it.
Correctly implementing required adjusting the Physics interfaces and implementing at
the physics plug-in level. The attached is a patch that correctly implements
llSetHoverHeight() including updates to the ODE physics plug-in.
Changes to IWindModule interface: Change from assuming a single array of
256 Vector2 values to a lookup function that takes region x, y, z and returns a Vector3
* Changed llWind() to use new lookup method of IWindModule
* Moved logic for determining the wind at a given point in the data array from
llWind() to the Wind Module itself.
isn't tested, but it doesn't break anything else. The reason for this
function is to let in world tools be used to coordiante out of world
network services that need access to client ip addresses.
* Added log4net dependency to physxplugin in prebuild.xml.
* Added missing m_log fields to classes.
* Replaced Console.WriteLine with appropriate m_log.Xxxx
* Tested that nant test target runs succesfully.
* Tested that local opensim sandbox starts up without errors.
The built-in default is OpenSim, unless a user server url is given, then
that is used, unless "shard" is also goven, then shard takes precedence.
The defult in OpenSim.ini is "OpenSim" for compatibility.
* Not locking causes enumeration exceptions as described in this matis
* part.TaskInventory needs to be locked for every access as it's a dictionary
* Extra locking will hopefully not cause any major issues - in places where the enumeration of the dictionary performs other lock or long running operations, the dictionary is
cloned instead
The attached patch implements osGetDrawStringSize that looks like:
vector osGetDrawStringSize(string contentType, string text, string
fontName, int fontSize)
in LSL. It is meant to be used in conjunction with the osDraw*
functions. It returns accurate information on the size that a given
string will be rendered given the specified font and font size.
This allows for nicely formatted and positioned text on the generated
image.
and dropped nonths ago, because it is required to get smooth region
crossings with AO running. Without it, in some corner cases, anims will
continue to run in an unstoppable state.
The following patch fixes http://opensimulator.org/mantis/view.php?id=3107
[^] by changing call from setRot to llSetRot, the later handles
child prim being rotated relative to root prim in linked set.
In SL if llAbs() is called with the minimum integer value of -2147483648
it will return that value untouched without error.
this patch replicates the SL functionality.
OpenSim currently throws an overflow exception: number too small under
mono or a "System.OverflowException: Negating the minimum value of a
twos complement number is invalid. " under .NET
NOTHING has been deleted or moved off to forge at this point. what
has happened is that OpenSim.Region.Environment.Modules has been split
in two:
- OpenSim.Region.CoreModules: all those modules that are either
directly or indirectly referenced from other OpenSim packages, or
that provide functionality that the OpenSim developer community
considers core functionality:
CoreModules/Agent/AssetTransaction
CoreModules/Agent/Capabilities
CoreModules/Agent/TextureDownload
CoreModules/Agent/TextureSender
CoreModules/Agent/TextureSender/Tests
CoreModules/Agent/Xfer
CoreModules/Avatar/AvatarFactory
CoreModules/Avatar/Chat/ChatModule
CoreModules/Avatar/Combat
CoreModules/Avatar/Currency/SampleMoney
CoreModules/Avatar/Dialog
CoreModules/Avatar/Friends
CoreModules/Avatar/Gestures
CoreModules/Avatar/Groups
CoreModules/Avatar/InstantMessage
CoreModules/Avatar/Inventory
CoreModules/Avatar/Inventory/Archiver
CoreModules/Avatar/Inventory/Transfer
CoreModules/Avatar/Lure
CoreModules/Avatar/ObjectCaps
CoreModules/Avatar/Profiles
CoreModules/Communications/Local
CoreModules/Communications/REST
CoreModules/Framework/EventQueue
CoreModules/Framework/InterfaceCommander
CoreModules/Hypergrid
CoreModules/InterGrid
CoreModules/Scripting/DynamicTexture
CoreModules/Scripting/EMailModules
CoreModules/Scripting/HttpRequest
CoreModules/Scripting/LoadImageURL
CoreModules/Scripting/VectorRender
CoreModules/Scripting/WorldComm
CoreModules/Scripting/XMLRPC
CoreModules/World/Archiver
CoreModules/World/Archiver/Tests
CoreModules/World/Estate
CoreModules/World/Land
CoreModules/World/Permissions
CoreModules/World/Serialiser
CoreModules/World/Sound
CoreModules/World/Sun
CoreModules/World/Terrain
CoreModules/World/Terrain/DefaultEffects
CoreModules/World/Terrain/DefaultEffects/bin
CoreModules/World/Terrain/DefaultEffects/bin/Debug
CoreModules/World/Terrain/Effects
CoreModules/World/Terrain/FileLoaders
CoreModules/World/Terrain/FloodBrushes
CoreModules/World/Terrain/PaintBrushes
CoreModules/World/Terrain/Tests
CoreModules/World/Vegetation
CoreModules/World/Wind
CoreModules/World/WorldMap
- OpenSim.Region.OptionalModules: all those modules that are not core
modules:
OptionalModules/Avatar/Chat/IRC-stuff
OptionalModules/Avatar/Concierge
OptionalModules/Avatar/Voice/AsterixVoice
OptionalModules/Avatar/Voice/SIPVoice
OptionalModules/ContentManagementSystem
OptionalModules/Grid/Interregion
OptionalModules/Python
OptionalModules/SvnSerialiser
OptionalModules/World/NPC
OptionalModules/World/TreePopulator
Created nunit test for LSL API and example test for
llAngleBetween which was marked untested in wiki.
Run new test succesfully with NUnitGUI and nant build.
line editing, context sensitive help (press ? at any time), command line
history, a new plugin command system and new appender features thet let you
type while the console is scrolling. Seamlessly integrates the ICommander
interfaces.
OpenSim.Region.Environment into a "framework" part and a modules only
part. This first changeset refactors OpenSim.Region.Environment.Scenes,
OpenSim.Region.Environment.Interfaces, and OpenSim.Region.Interfaces
into OpenSim.Region.Framework.{Interfaces,Scenes} leaving only region
modules in OpenSim.Region.Environment.
The next step will be to move region modules up from
OpenSim.Region.Environment.Modules to OpenSim.Region.CoreModules and
then sort out which modules are really core modules and which should
move out to forge.
I've been very careful to NOT BREAK anything. i hope i've
succeeded. as this is the work of a whole week i hope i managed to
keep track with the applied patches of the last week --- could any of
you that did check in stuff have a look at whether it survived? thx!
This patch fixes the problem where if an object containing a script is
deleted at the same time as an object containing the same script is
rezzed, it can result in the assembly file being deleted after the
second object script initialisation has found it but not started using
it yet, resulting in the script not starting up.
This changeset fixes a race condition where a script (XEngine run) can
startup before a reference is added to it in all of the required
places in the XEngine class. The effect of this is that a script can
sometimes on startup miss script events. For example a script which
starts up and initialises itself from a notecard may never receive the
dataserver event containing the notecard information.
The patch isn't as clean as I'd like - I've split the constructor of
ScriptInstance up so it does everything it did before except
call Startup and post events like state_entry and on_rez. An Init
function has been added which is called after the ScriptInstance
object has been added to the necessary data structures in XEngine.
Happy to rework it if someone suggests a better way of doing it.
Adding Oarfileloaded and EmptyScriptCompileQueue event support which
allows (with a module) for programmatic notification of when a region
objects and scripts are up and running after a server start or
load-oar.
The attached patch adds the automatic granting of PERMISSION_CONTROL_CAMERA
on request to a script when an avatar is sitting on the object that the script
resides in.
It also automatically removes PERMISSION_TAKE_CONTROLS and PERMISSION_CONTROL_CAMERA
from the scripts when an avatar stands up. It doesn't remove the other automatically
granted permissions but this follows LL server behavior. Removing these two
permissions avoids some potential race conditions (accidentally taking
control after the avatar has stood up) which may be why LL put
them in the first place.
On a call of llVolumeDetect(1) (or any other number !=0) volume
detection is enabled. Together with VD, the phantom flag is set to the GUI.
On a call of llVolumeDetect(0), vd detection is switched of again,
also the phantom state is removed. On a call to llSetState(STATE_PHANTOM,
false) while VD is active, also VD is switched off. The same is true for
unchecking the phantom flag via GUI. This allows to take back VD without
the need to script just by removing the phantom flag.
Things missing in this patch: persistance of the volume-detection flag.
This needs more discussion and will be included in another patch soon.
It is not documented to be applied to llGetTimeOfDay at all and is not appropriate for the other two because dilation does not directly affect script speed in OS.
Fixes Mantis #2783 and #2162
The attached patch ads an OpenSim.ini option (AutomaticLinkPermission)
which when enabled makes PERMISSION_CHANGE_LINKS to be granted to
scripts by default. When enabled llGetPermissions will always return it
as granted and llCreateLink//llBreakLink will succeed without
doing llRequestPermissions. ONLY ENABLE THIS IN TRUSTED ENVIRONMENTS.
The patch also fixes a minor bug in llCreateLink
related to a potential dereference of a null client object.
* Warning! Physics API change. This means that the NBodySimulation needs to be updated!
* PhysicsActor -> void SetVolumeDetect(int) needs to go into classes that use PhysicsActor as their base class.
The attached patch fixes the bug where llCreateLink will cause a null dereference
if the avatar who gave link permission for the object is no longer logged in.
Use height calculation in Basic Physics and Physics of Simplicity so that avatars larger than the default walk with straight legs and shorter walk on the ground.
* Entities should now in theory be lock-free externally.
* Other properties may cause blocking however[?].
* ScenePresence maintains separate locks so isn't fixed by this commit.
* SceneObjectPartInventory.cs isn't a particularly good name but it's probably not got a long life
* A proper inventory interface to follow
* Parallel changes for other inventory partial classes to follow at a later date
release a direct descendant of the stable 7364, with all the features and
none of the issues.
This omits the following patch chain: r7383 r7382 r7381 r7377 r7375 r7373
r7372 r7370 r7369 r7368 r7367 r7366
* This renders RootPart == null checks useless - the replacement is to check SOG.IsDeleted. However, in many cases this will not be necessary since updates to deleted parts
will not be sent to the client
* This should remove any remaining race conditions where an object is deleted while another thread is yet to obtain the root part to perform some operation
* Doing this is probably a necessary prerequisite to moving to a model without a separate SOG and SOP
* Unfortunately it's not possible to eliminate all RootPart == null checks since in some contexts it is currently used to check whether an object was created successfully
causes defautlt behavior. "true" now means usable unconditionally, "false"
means disabled, and a list of UUIDs restricts it.
This changes SECURITY! If you used "true" here before, you shoudl review
your setup!
the IM module and makes it into a module of it's own, which can be used by
all other modules. Removes some ugly hacks. Refer to the IM module to see
how it's used. Also fixes the persistence issue (Mantis #2598)
* This doesn't allow complete script lockdown of a sim, many avenues (copying, editing) are still uncloseable at the moment
* Default remains to allow all users to create scripts (subject to existing permissions if enabled)
This patch makes llAllowInventoryDrop work with the permissions module
enabled. Changes include:
- Enabled PropagatePermissions when permissions module serverside perms
is on
- change ownership of item when item is dropped into an object.
Ownership changes to the owner of the object the item is dropped into
- propagation of permissions if the permissions module enabled (eg
next-owner mask applied)
- CHANGED_ALLOWED_DROP is now passed to the change script event if an
item was allowed to be dropped into the object only because
llAllowInventoryDrop is enabled (instead of CHANGED_INVENTORY being
passed).
- Sets object flags correctly when llAllowInventoryDrop is called so
clients are notified immediately of the change in state. Am not
sure that calling aggregateScriptEvents is the right way to do it,
but it works and seems to be the only way without making further
changes to update LocalFlags
PRIM_TEMP_ON_REZ and PRIM_MATERIAL are not implemented in
llSetPrimitiveParams so support for these is in the patch.
Also two deprecated functions throw errors. They are changed
to behave as in SL: llSetPrimURL - Does nothing except the sleep
(currently commented out) & llRefreshPrimURL shouts
"llRefreshPrimURL - not yet supported" on the error channel
potential (asset bloat, asset server DOS due to no enforced delay)
Formatting cleanup. Change default permissions on the notecard to
not include "anyone can copy" and "anyone can move", as they are
meaningless on non-prim items.
* Inserts proper animation state names into data/avataranimations.xml file so that llGetAnimation() works as one would expect.
* Thanks StrawberryFride!
* This is a partial implementation of llGetAnimation that returns the name of the animation as stored in data/avataranimations.xml but not its state name (since we don't yet
have these).
* Thanks StrawberryFride
This patch allows an object to directly message another object given its
key using the method osMessageObject(key objectUUID,string message).
to communicate with an object it must implement the dataserver listener
method. The dataserver method is passed the key of the calling object
and a string message.
* The attached patch changes the LSLInteger operator overrides for == and != to return LSLIntegers 1 or 0 instead of a bool and adds similar operator overrides for >, <, >= and
<=
* Thanks idb!
The following should silently fail when attached,
llBreakAllLinks, llBreakLink, llCreateLink.
The following should be restricted to avatars in the same sim,
llGetAgentInfo, llSameGroup, llGetAgentSize, llGetAnimationList.
Comment added to the following unimplemented functions,
llGetAgentLanguage, llGetAnimation.
llGetBoundingBox is completely unimplemented. The attached
patch contains a partial implementation for single prim
objects and standing, flying and ground sitting avatars.
In the case of an avatar sat on an object or multi-prim
objects only the bounding box of the root prim is returned.
llRezObject and llRezAtRoot ignored any velocity parameter.
The attached patch makes use of it if it is not a zero vector.
chat relaying via private channels, and old IRCBridgeModule
behaviour. also cleaning up IRCBridgeModule's OpenSim.ini
configuration variable names (still supporting "old" variable
names). refactored IRCChatModule into IRCConnector and incorporating
watchdog from IRCBridgeModule into IRCConnector.
enabling ChatModule to be used as a super-class and utilizing it in
ConciergeModule.
* Implement the linear impulse portion of llPushObject. We should have a lsl compatible implementation of that portion of the push. Angular.. well. still have yet to implement a torque accumulator.
* llPushObject respects the region and parcel settings for Restrict Push, it also respects GodMode as is defined in the LSL spec.
- Added two missing caps (UpdateScriptAgent, UpdateScriptTask)
- Added one missing EventQueue event (ScriptRunningReply)
- Changed DNE and XEngine to use this new event
As we only use the mono engine anyway, the "Mono" checkbox is set by
default but doesn't have any function.
* Calculate an agents height in LLGetAgentSize() from apperance parameters rather than physics avatar numbers
* Another good looking patch from idb - thanks!
If prim is part of SOG, then ask the SOG to update the
position, rather than asking the part itself.
Ghosted child prims should no longer result from llSetPos.
Not sure if this is the right approach for all cases ,
would appreciate feedback on the patch.
The attached patch fixes mantis bug 2312 (llGetPos() returns incorrect
values for child prims where the root prim is rotated). Regression
tests still pass.
Incidentally AbsolutePosition which was used before looks a little
suspicious to me as its always going to return the wrong value if the
root prim is rotated. GetWorldPosition does take the rotation into
account, but AbsolutePosition is used in a lot of places. Though i
don't understand why there is both GetWorldPosition as well as
AbsolutePosition so I've left the latter alone.
[i also cleaned up some indent problems, --- dr scofield]
Attached is a patch for LLGround which was just plain broken and could
cause a runtime error. It now returns valid data with valid input (ie
the offset does not take the position off the edge of the sim), but a
runtime error will occur if invalid data is given.
On invalid data the LL servers return the ground height based on a
valid point closest to the effective position calculated using the
supplied offset. Is the OpenSim convention to replicate the LL servers
as closely as possible? If so I can submit an additional patch to
replicate the LL behaviour.
llSetLinkApha is not fully implemented and has not been updated
to use the recently added GetLinkParts and associated implementation
pattern as per llSetLinkColor and llSetLinkPrimitiveParams.
Prevent EventAbortException inner exceptions of
TargetInvocationException being re-thrown from
OpenSim.Region.ScriptEngine.Shared.ScriptBase.
Executor.ExecuteEvent
Implementation of llModifyLand() and There is a bug on
permission-check of land-terraforming: x an y-coordinates
are interchanged on function-call ExternalChecksCanTerraformLand.
Correct: x is west, and y is north. 2) Missing check of
"Other allow to terraform-flag" (Parcel.ParcelFlags.AllowTerraform)
Addresses llDie issues. The attached patch catches run time
exceptions that occur during method invocation (of type
TargetInvocationException) and exposes the internal exception.
This makes it possible to pass out the SelfDeleteException.
Also added handlers in a couple places to make sure that
exception was being passed out far enough to be handled
correctly. Tested on DNE.
Fix: objects being duplicated inventory on detach. Fix: Mad jumping around of
attachments while editing. Fix: Attachments being persisted to database on
login. Fix: Attachments being persisted when changed by a script like
invisprim refresh. Fix: Attachpoint set, but not reset correctly. Fix: prevent
spurious full updates while editing attachments. Several other fixes
In Second Life's implementation of llParseString2List(), all spacer
strings which occur within the source string are included in the
resulting list. In OpenSim's implementation, any spacers occurring
at the beginning of the string are discarded; furthermore, if multiple
spacers occur between non-spacer elements, or at the end of the source
string, only the first spacer is added to the resulting list;
the remainder are discarded.
Thank you, fusspawn, for an implementation of osGetSimulatorVersion.
This patch removes the llRequestSimulatorData(..., 128) hack and
implements the functionality as an osFunction.
A number of the deprecated functions had missing parameters
causing compile errors. These included:
llSound, llMakeExplosion, llMakeFountain, llMakeSmoke,
llMakeFire, llPointAt, llXorBase64Strings, llSetPrimURL
OS/SL script conformance, implement llSoundPreload and
llRemoteLoadScript to behave as in SL. In SL
llSoundPreload appears to do nothing. In OS
llRemoteLoadScript shouts an error when invoked
"Deprecated. Please use llRemoteLoadScriptPin instead."
The current llGetLinkName returns an empty string if a prim
with the given link number is not found in the link set. In
SL an empty string is only returned if the prim name is actually
blank, a NULL_KEY is returned instead with a couple of exceptions.
DNE and move all of DNE into the DotNetEngine directory. Remove references
that would cause the script runtime to load the entire engine + scene into
each script appdomain. This might help DNE memory consumption.
The binaries are still different, but that is only a small step away now.
The OSSLPrim has been removed. This commit will breal all scripts
using Prim.Scale(), etc, syntax. It was not secure and will have to
be brought back in another form.
Scene. Make the script engines check that the engine name in the
//Engine:language comment is a valid engine and treat it as a normal
comment if it's not.
//DotNetEngine: needs to be written as //ScriptEngine.DotNetEngine: now, since
that is it's real internal name. //XEngine: still works
Check the client dialog box (from top menu) WORLD / REGION ESTATE
/ REGION tab. The client dialog box seems to have a hard limit of
about 32 characters per line available for displaying the region
version number. Our regions are sending a string which is greater
than the limit, causing the client to wrap the text and look ugly.
The entire LSL API is now in the single, shared file
OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api_Base.cs
This is for both engines. The OSSL function are still separate.
and makes it use a common set of types in both engine. Fixes the issues with
running both engines and HTTP requests / listens / timers etc..
Also fixes a couple of minor Scene issues and a CTB by nullref.
all methods needed outside the API ststic. Async command processing
is now wholly internal to the API. This sets the stage for the next
convergence step.
of the types, located in OpenSim/Region/ScriptEngines/Shared/LSL_Tyoes.cs
Also changes the compiler in DotNetEngine to use that. You _will_ need to
let your region recompile all your scripts!
Thank you, tyre, for a patch that refactors LSL to use a unified set of
method signatures and type names, reorders methods and removes unused
and adds new method stubs.
ordinary region modules and are able to coexist in one instance.
See http://opensimulator.org/wiki/ScriptEngines for details. There were
changes to OpenSim.ini.example, please note DefaultScriptEngine.
Also see the User docs and FAQ on the Wiki. Default is DotNetEngine.
- Conformance fix: If the notecard can't be found, shout on DEBUG_CHANNEL as the docs state
- Bug fix: Don't let llGetNotecardLine throw an exception on freshly created notecards
* On script rez, XEngine was taking an m_scripts lock and then later on an m_parts lock when looking for a part by local id
* In the meantime, a scene object being deleted would take an m_parts lock and then later on try to take an m_scripts lock when it tried to trigger script removal
* There may be better ways to resolve this, but I believe that in general, we must always take an m_parts lock before an m_scripts lock
Correct a condition where a prim is linked before it has been persisted
for the first time and is then persisted through it's former SOG with
a bad offset position.
XEngine: Change a number of methods to use the new link part method.
Fix ALL_SIDES for llSetColor, llSetTexture, llSetAlpha, llSetPrimitiveParams,
llGetPrimitiveParams(PRIM_TEXTURE, PRIM_COLOR).
XEngine fixes: prevent queue overruns, prevent spamming when no key
is down. Release controls when conflicting permissions are requested
or permissions are refused later. Release when prim or script are deleted.
Fixes Scene script instance deletion semantics.
after using llTakeControls my sim receives about 200 messages per second,
l of which get queued , this could be because there is no lag as the viewer
and sim are on the same computer. The patch I have included checks to see if
the "Changed" param is 0 then searches the EventQueue for Control messages
being sent to the same localid, if it finds a message already in the Queue
and Changed==0 then the new message is only notifing you the key is being held,
since there is already a message the new one isnt needed so it isnt added
to the queue.
works. Also makes llGetFreeMemory return the constant 16384.
LLGetFreeMemory is useless in SL, as it never goes up, only down.
So, the only thing it is used for, in practice, is to detect an imminent
stack/heap collision, a danger we don't have.
Remove some unused osFunctions that were left in the LSL function
file from the separation way back when. Inline the osSetParcelMediaURL
code to get rid of the osFunction. Really need to add a way for one API
to call another.
functions return CLI strings, which, in the case of lists, don't
get wrapped. Therefore, the list had to be able to deal with
that CLI type here. The correct fix would be to change all LSL
function returns to LSL types.
Thank you, ralphos, for a patch the adapts llSetColor and friends to
a change in the underlying types.
Also, thank you for a much cleaner way of casting types out of
lists, which I will adopt throughout.
Floating text, Rotation, Texture animation, Particle System
This will make "Eye Candy" scripts work without modification in
XEngine. The use of the CHANGED_REGION_RESTART hack is no longer
needed. Implemented in MySQL only, hovertext also in SQLite.
* Please note that this implementation has not been mathematically verified to be correct-as-described, it is probable that this implementation may produce differing results to Linden Lab. Testing (and test data) would be appreciated.
duplicate delivery of state_entry if a region is restarted just after
saving the script. Changes script state saves to no longer abort long-
running event handlers. Queues the save instead. Adds shutdown handler
to save script state on irderly shutdown
* This is a HUGE OMG update and will definitely have unknown side effects.. so this is really only for the strong hearted at this point. Regular people should let the dust settle.
* This has been tested to work with most basic functions. However.. make sure you back up 'everything' before using this. It's that big!
* Essentially we're back at square 1 in the testing phase.. so lets identify things that broke.
Types extracted from a LSL_Types.list have to be down-cast initially
to the exact type of value type object that the Object actually is.
This would make for very cumbersome, ugly code when extracting list
parameter items in ll functions where a few implicit conversions
should be applied such as key -> LSLString and LSLInteger -> LSLFloat
(but not LSLFloat -> LSLInteger). This patch adds a set of GetXXXItem
member functions to the LLS_Type.list class, where XXX is the name
of the LSL_Type to be extracted: LSLFLoat, LSLInteger etc. All take
a single, int parameter that is the item number to be extracted.
1000 chars to avoid the exception thrown by libomv at 1100 chars.
Change string->int conversion so it copes with non-numeric chars
after the number and no longer uses a float to parse the value.
It wraps constants in new LSLType(x), so that lists with
constant values are processed correctly. Contains changes to
the lsl.parser.cs that are not (yet) reflected in opensim-libs,
since this experimental patch affects XEngine only. Also contains
nuts.
which is a thin wrapper around a IWorkItemResult from the SmartThreadPool.
However, it is very easy to reimplement on top of basic threading and therefore
makes the IScriptInstance class independent of the specific threading
implementation.
engines that want to use the XEngine's instance handling and state
persistence can do so. IScriptInstance is optional, but it does
require the SmartThreadPool if it is used.
This patch adds even more LSL compatibility to llSetPos() As stated in the
wiki http://wiki.secondlife.com/wiki/LlSetPos, [^] movement should also be
capped to 10m per call for unattached root prims.
Beside this issue the attached patch adds (hopefully) all known LSL script
delays (as ScriptSleep(), but still commented out) to LSL_BuiltIn_Commands.cs
and LSL_Api.cs and a lot of format cleanup.
at 1.0, it allows delays to function as coded. Smaller values will
reduce, larger values will increase the delays. A value of 0 is
permitted and results in on delay being applied.
Thank you, salahzar, for a patch that corrects the behavior
of PRIM_TYPE in llGetPrimitiveParams() and improves LSL
conformance in llGetNumberOfSides();
The version of llSetLinkPrimitiveParams in LSL_BuiltIn_Commands.cs
has not been kept in sync with the additional functionality made
recently to the llSetLinkPrimitiveParams implementation in
LSL_Api.cs which includes support for setting glow, full bright and
other privative parameters. A patch to LSL_BuiltIn_Commands.cs is
provided the incorperates this functionality (duplicated).
also enable LSLconformance on some texture functions as well.
Applied the part of the patch in Shared/.
The part for Common/ needs to be reworked to remove the reference
into Shared/
It is now possible to use module interfaces without referencing Scene.
Place those interfaces in OpenSim/Region/Interfaces. They may not
use any refs from OpenSim.Region.Environment as parameters.
This resolves a circular library ref introduced in r5949
This patch improves LSL conformance by inserting a 0.2 second delay
into llSetPos/llSetRot, as the function specification states.
Thanks to M. Igarashi for the patch.
* Yield Prolog 1.0.1 Released : it passes all but 9 of the
421 tests in the ISO Prolog test suite (97.8%) .
* support dynamic predicates and rules.
* support 'import' to use external static functions
improves connection to C# functions
* Matches Yield Prolog r831
llRezObject changed to llRezAtRoot. llRezObject implemented
to call llRezAtRoot until I can figure out how to calculate
a bounding box. Partial implementation of llPushObject
(no angular impulse applied)
In case you run the server with mono --debug OpenSim.exe
line numbers are reported as <filename>:<linenumber>, so no
"at line" is found. That led to an exception, which is caught
since r5766. The attached patch fixes this for mono;
* From the logs, I'm guessing probable cause is that an exception generated by a bad index given to substring error line number conversion stopped the script being killed, leading to continuous events that filled up the log (maybe)
* Someone will need to go back and fix this properly
used in scripts
-cast from bool to LSL{Integer,Float,String} so functions such as `integer
isZero(integer x) { return (x == 0); }` work
-progress on issue 1863
Changes erroneous return value of llGetLinkname() to "" for nonexistent
prims. Corrects an issue where the root prim of a linked set, upon
delink, retains the part number 1.
I found a problem trying to get s value directly from a quaternion q.
Compiling a script which directly access to q.s value, caused the
following error:
CS0103: 'The . symbol cannot be used in LSL except in float values
or vector components'. Detected around: q.s
I did a small change to allow alphabetic letter "s" to be interpretated
as valid identifier. This solves the problem.
llAxes2Rot now implemented. Important note: quaternion <x,y,z,s>
is equal to <-x,-y,-z,-s>. The result may be different from LSL
output, but it is correct. A problem of rounding caused an error
of square rooting of zero as negative number, corrected by squaring
again. Function tested 360° along 3 axes. Vector fwd, left and up
have to be normalized.
Implements additional unlink modes (unlink root prim from link set, some
multi-set operations). Linking (single and mutiple) fully implemented.
Consistent numbering of links while in world. Link/delink with predictable
link numbering. Correct link numbers in LSL.
Not all multi-set ops implemented. Link numbers still change when taken and
re-rezzed.
llRot2Left and llRot2Up functions modified, using fast algebric
calculations instead of vectors and quaternions products.
The accuracy is the same. Normalization is now implemented.
llRot2Fwd function modified, using fast algebric calculations
instead of vectors and quaternions products. The accuracy is
the same. Normalization is now implemented.
The previous implementation of llEuler2Rot was not mathematically
incorrect, but it was an awkward way of posing the problem that
led to a few degenerate cases which were not handled correctly -
for example, PI rotations around X and Z axes were wrong. I put
some comments in the source about how I arrived at the current
implementation, which I think is easier to read, and gives
results that match SL.
When using math operators +,-,*,/ in an LSL script with an LSLFloat
and an integer literal the wrong result is returned. This patch
adds operators to the LSLFloat type to handle this case.
I needed to apply the patch a little better then last night
for: Dot product operator in LSL_Types.cs incorrectly returns
a component-wise vector multiplication; it should return a
scalar dot product. Thanks to M. Igarashi for the patch.
Dot product operator in LSL_Types.cs incorrectly returns a
component-wise vector multiplication; it should return a scalar
dot product. Thanks to M. Igarashi for the patch.
Patch 7 of the region patches. Finish off the region parts of the estate dialog. Full user functionality. Terrain textures, heights, water, avatar counts, prim bonus, debug settings and region toggles can now be set from the dialog on a per-region basis. Estate stuff defaults to sane values where there are no defaults, to estate_settings.xml otherwise. Sun still b0rked :(
Add a config option to OpenSim.ini to select between script compilers
in the XEngine without recompile.
Set UseNewCompiler=true in OpenSim.ini and try it out.
Creates the ICodeConverter interface and adapts the new compiler to it.
This patch limits the maximum size of prims that can be created using libsl bots
or modified clients to 65536mper side. It also limits LSL functions to that size.
If a prim is already physical, the enforced constraint is 10m.
A prim that is larger than 10m cannot be turned physical, either via script or UI.
Linksets are handled correctly, so scaling of physical linksets is constrained by
the size of it's largest component prim. Also, turning linksets physical is based
on the size of it's largest ptim.
LSLInteger + literal integer is not an LSLInteger.
The included patch fixes the issue: LSLInteger + literal
integer is not an LSLInteger (also fixed for -,*,/)
added void osSetParcelMediaTime(double time) command to script engines.
which sets the position of the media that is playing. Time is in seconds.
Doesn't do any security checking (should be checking that the object/script is owned by the parcel owner). So could be abused, if it is then we should remove it, or add the security.
Only tested in dotnet scripting engine, but should work in XEngine too.
In LSL, the state command should have an immediate effect.
The OpenSim script engine seems to wait until the function
ends to process the state transition.
This patch adds the ability to set the prim type using llSetPrimitiveParams().
Seems to work ok, but there are a staggering number of cases to test,
so I have not yet tested them all.
It would appear that calling llResetScript() in state_entry() causes deadlock of region.
Probably due to llResetScript calling state_entry again. llResetScript should see who called it,
and not recall state_entry() after a state/variable reset. Once this script is in a prim,
the region/world/debug/script window shows it consuming the server (from 2,400 to 800,000 milliseconds).
Another new OSSL function for returning the name of the script engine
currently running, osGetScriptEngineName, added to both DotNet and XEngine
OSSL API.
* This means that we will no longer pointlessly repersist all the prims in the scene when OpenSim first starts up
* This also means that force-update on the console will not trigger repersistence.
* Also, in other places persistence is no longer done where it wasn't actually necessary
* I think I changed the code for all instances correctly, but it's not possible that I missed some and some things which did persist properly have stopped
* Please patch or mantis if this is the case
Fixes:
- Wearable icon and name sreset to default on copy/paste
- Cache is not updated when renaming/moving folders
- Partial refactor to make inventory less dependen on AssetBase having a "Name" field
- Add llGiveInventoryList() function
"First stage in a major Script Engine refactor, that will result in the LSL implementaions ebing reconverged. Not there yet, but one major part is done."
Thank you, Melanie!
Currently LSL code such as below does not compile on OpenSim, but compiles fine in Second Life:
list mylist = [];
mylist += [1, 2, 3];
mylist += "four";
list newlist = mylist + 5.0;
The problem is that the LSL_Types.list class does not have an operator for adding a string to a list.
I am including a patch which implements adding a string, integer or float to a list.
I am also including tests. The file LSL_TypesTestList.cs belongs in
OpenSim/Tests/OpenSim/Region/ScriptEngine/Common/.
The attatched patch makes the changed() event fire properly and
lets scripts run properly.
NOTE: All existing state files must be deleted:
rm ScriptEngines/*/*.state
Adds full implementation of all llDetected* functions for sensors,
collisions and touches. Adds changed(CHANGED_REGION_RESTART) event
to allow restarting of eye-candy functionality not currently
persisted with the prim.
the function that reports errors in event handling is not computing the
line numbers correctly for windows paths (and probably linux paths).
As a result, the conversion to int throws an exception.
note... i'm not sure why we extract the line number, convert it to an int,
then convert it back to a string... but hey... :-)
LSL scripts in which a float type is cast to a string or a string type
is cast to a float do not compile. When the script is translated from
LSL to C#, the LSL float type is translated into double. There is no
string <-> double cast in C#, so compilation fails.
There is a LSLFloat type, however it seems unfinished and is not used.
I am attaching a patch that implements the LSLFloat type. I have also
added two methods to the LSLString type to facilitate float <-> string casts.
* Unfortunately, there's some kludges with the Async manager and the llDetected functions that I have yet to decipher... so llDetected functions don't work with collision events at the moment....
llKey2Name fix to show avatar name instead of "Basic Entity"
One line fix. Replaces "presence.Name" =>
"presence.ControllingClient.Name" to return avatar's name.
This patch adds the prolog interperter helper object ONLY for YP code,
and not every script compiled.
Mirrors the other languages like JS and VB more closely.
to every script in most environments). This will break prolog
support. Prolog code needs to generate it's template script more like
how javascript does.
I have added everything *except* the patch to
.../LSL/Compiler.cs. The Compiler.cs patch has a
namespace issue. Lets make a second patch to close
the gap.
- volume doesn't change with a new llLoopSound(same sound, new volume);
- SendFullUpdateToClients sends 0's in all sound related fields when
there's no sound on the prim, thereby improving the amount of data being
sent out on these prims (fixes zeropack)
- Removed some code duplication between llStartSound, llLoopSound and llParticleSystem() calls
There appears to be a problem with the mapping of scripts when an llHTTPRequest completes.
CheckHttpRequests() looks for a function that maps to the localID associated with the http
request. However, the only context in which it looks is that of the first region. That is,
m_CmdManager.m_ScriptEngine.m_ScriptManager is the same no matter where the script executed
that initiated the llHTTPRequest. Since scripts appear to be loaded into a region specific
scriptmanager on startup, the event handler is only found for requests coming from the first region.
Attached is an initial implementation of llGetNotecardLine and
llGetNumberOfNotecardLines. I decided to go ahead an send these out for
comment while I continue to work on the second part of the proper
implementation. These functions work and return the values requested, as
initially defined in the code, but should be properly implemented to return
the requested information via a dataserver event. This
event will be added and these functions fixed and included in a second
patch shortly.
llLoopSound sends out one packet to clients in view, so it doesn't work anymore
when clients enter later on, or the prim is modified in any way.
Solution: Stored sound data on prim, send full update instead.
llStartSound and llLoopSound now accept both LLUUIDs to a sound as well as object
inventory sound names. llStopSound clears prim data and sends full update.
This patch proposes a new function : osOpenRemoteDataChannel(key channeID)
that allow to open an XMLRPC channel for remote_data event. The difference
is that the channelID can be customized instead of being randomly generated.
Copying, reseting, dragging scripts cause unnecessary recompilation,
slowing down the simulator and filling up the ScriptEngines directory
with compiled .dll and misc. files.
This patch keeps track of compiled assets since the last simulator restarts,
and only recompiles new assets. (editing a script generates a new asset,
so no problems there).
* small patch that fixes a compiler warning (struct comparison against
null again, my favourites) in LSL_BuiltIn_Commands. LSL_Types.key has a
Boolean operator that can be used here.
* Added shell of new Python scripting engine. Similar in design to the one used by Rex, but will be structured at a region rather than object level, also is a region module.
* Moved script errors to the debug channel.
* Typing '/2147483647 OK' results in a debug_channel message.
* Expanded the available parameters that are send-able through IClientAPI
* Currently if you apply that to only one or two axis you get unpredictable and sometimes explosive results.
* Three axis works well enough to play with it anyway. More work is needed here.
* Fixed an incorrectly named method in ODE.NET
Attached is a patch for adding the llGetSunDirection functionality. It was implemented by adding a parameter to estate settings for storing the sun position. The sun position is calculated and stored via the sun module everytime the client's sun position is updated. It was tested with several different srcipts on Linux and Windows
* I expanded upon his patch just a bit to incorporate the following.
* if the avatar is sitting on this object, then we can unsit them.
* If the object owner also owns the parcel or if the land is group owned and the object is group owned by the same group or if the object is owned by a person with estate access, then we can unsit them.
* All objects are not touchable by default now
* When a script listens for one of the touch events in the state, an object becomes touchable.
* All LSL scripts report which events they consume now
** This uses semi-complicated Regex to discover the events, stick them in a dictionary, and then write a method call into each script state's state_entry() event.
** Tedd may figure out a better way to do this in the future. For now, this works for LSL.
Robust implementations of GetSubString, InsertString, and
DeleteSubstring. The existing implementations only worked for arguments
consistent with the underlying .Net implementation and did not
accomodate LL's negative indices.
Implements llGetInventoryKey with perms checking.
Adds perms checking to llGetTexture, adds type checking to llStartSound,
allows llSetTexture to reference textures by name
This provides fixed implementations for llListReplaceList and llList2CSV.
llListReplaceList was broken except for simple indices. llList2CSV did not handle processing of an empty list.
* Yet more script function cleanup - Patch fixes many different script functions: NotImplemented that weren't there at all, redundant or unneeded m_host.AddScriptLPS, etc
* Re-applied Tedd's patch that got overwritten.
* Replaced (state)\s+([^;\n\r]+)([\r\n\s];) with (state)\s+([^;\n\r]+)(;[\r\n\s])
* Added a state(string) method to BuiltIn_Commands_BaseClass
and llDetectedOwner is called on the script, the current implementation attempts to
find the detected avatar as a SceneObjectPart and return the owner of that part.
* Renamed plugin console message, to send a message to a plugin, use either "plugin <message>", or any unrecognised message will be sent ("plugin" sends explicitly) This replaces the old "script <message>".
* Terrain commands - "terrain <command>" now works again. "Script terrain <command>" does not. Many of the commands have now been reimplemented, eg load-tile. However some have new syntax.
* New console command handler, you can now use things like "terrain help" or "terrain save help". See TerrainModule.cs for an example of how to use the new "Commander" class.
* Commander class - advanced processing of console input and also enables a script API to be generated from registered console commands.
This patch implements llMessageLinked.
I had to make a change to llGetLinkNumber to return m_host.LinkNum + 1 for
link sets of more than 1 prim, or 0 for a single object, since according
to:
http://rpgstats.com/wiki/index.php?title=LlMessageLinked
linksets with 2 or more prims start the link numbering at 1, but a single
prims link number is 0.
* It doesn't generate at_target events, because they don't exist yet in the script engine.
* The Tau is different, however, compatible with scripts I tested.
* Not perfect... but pretty good.
* We should not be using ASCII anywhere except for legacy compatibility reasons.
* A large number of UTF8 Encoders are being used in places where we should be using Util.StringToField instead. These have been tagged with // ENCODING FAULT
* This should fix Mantis#799 - Japanese Profile Text does not work.
structs (such as LLUUID) are considered values by mono. comparing them against null makes no sense and the mono compiler will flag that as evaluating to always false --- except if "cleverly" disguised. the attached patch fixes such an occurrence in OpenSim/Region/ScriptEngine/Common/ScriptEngineBase/AsyncCommandPlugins/SensorRepeat.cs.
[yes, i'm on a crusade against comparing structs against null, go ask jradford from libsl ;-)]
Here's a diff of the changes I have made in support of the following LSL
script functions.
llSetScriptState
llGetScriptState
llCSV2List
llListRandomize
llList2ListStrided
llListFindList
llResetOtherScript
llGetScriptName
It was necessary to modify ExecutorBase in support of the ScriptState
implementations.
I also modified SceneObjectPart and SceneObjectPart.Inventory to
corrects a quoting mismatch in the commentary that through off live
parsing of the files.
I also simplified the State definition at the start of BuiltinCommands.
* Added osSetPrimFloatOnWater(BOOL) to make Physical prim float at the water level.
* osSetPrimFloatOnWater(TRUE); or osSetPrimFloatOnWater(FALSE);
* By default, prim do not float at the water level.
* More work is needed on the floating, but it's a start.
Also added osSetDynamicTextureDataBlend and osSetDynamicTextureURLBlend that will allow the various textures to be blended together, but currently there are still a few bugs in them. So not ready for use yet.
* Enabled new TerrainModule. (The king is dead, long live the king!)
* Use the console command: "script terrain save file.r32" / "script terrain load file.r32" to load/save terrain. Now uses the extension to determine file format.
* MANY of the old terrain features do not have a replacement function in the new module yet, this needs to be corrected, but has not been done so far. This being said, the new module is faster and more efficient and should be a good replacement.
* Impelements llInstantMessage
* Reimplements llOwnerSay as llInstantMessage(llGetOWner(),msg).
* Try's to better identify the "True Name" of objects in llDetectedName
by checking for avatar name, scene Object Part name and entity name.
* Uses similar logic in the llSensor and llSensorRepeat functions.
This patch is intended to implement the following functions:
llIntegerToBase64
llBase64ToInteger
llParseStringKeepNulls
None of these functions are dependent upon state elsewhere in the SIM,
so they are appropriately self-contained. I've tested them out of
context, and from a script attached to an object in my test region.
* Speeding up ScriptEngine shutdown
* Sharing threads so that minimum total thread count for any amount of regions will be 2. (1 maintenance, 1 script execution)
You can choose more script exec threads if you want of course.
In this commit: Sharing maintenance thread between all regions.
In his own words:
If a prim becomes a listener or remote channel and the script is deleted, it cannot become a listener or channel again with a new script.
This patch fixes that.
Changed the public IsAdministrator back to protected,
now checks Config to see whether it is allowed to run or not.
Defaults to false (not allowed).
To use add the following to OpenSim.ini
[LL-Functions]
AllowosConsoleCommand=true
Added some info to failure on GridServices listening port so people can see what actually went wrong.
Moved most of the function/event execution module to a baseclass so other execution methods (instead of reflection) can be used with custom script modules run by ScriptEngine.Common.
+ some accumulated patches
* Converted all instances of "256" spotted to use RegionSize instead. Some approximations used for border crossings (ie 255.9f) are still using that value, but should be updated to use something based on RegionSize.
* Moving Terrain to a RegionModule, implemented ITerrainChannel and TerrainModule - nonfunctional, but will be soon.
Replaced (?<s1>(?![a-zA-Z_]+)\s*)" + @"([a-zA-Z_]+)(?<s2>[^a-zA-Z_\(\)]*){ with (?<s1>(?![a-zA-Z_]+)\s*)" + @"(state\s+)?([a-zA-Z_]+)(?<s2>[^a-zA-Z_\(\)]*){
Lets see what happens now... :)
The ScriptDialogReply packet handler is a bit of a hack job. It is currently handled similar to ChatFromViewer, which will trigger the listen() event, however this is not exactly how LL's implementation works and will/can be fixed up later.
CONFIG SET section key value value value
CONFIG GET section key
CONFIG SAVE (it saves, but does it save correctly?:)
ScriptEngine will react correctly to any config change made while it is running.
OpenSim.32BitLaunch.exe is a 32-bit application that loads OpenSim.exe using .Net framework, hence it is JIT-compiled to 32-bit.
Use this app to start OpenSim on 64-bit systems (works great on Vista 64 :))
Added VISUAL BASIC.NET-support
//cs, //lsl and //vb as first characters of script will determine what compiler is used.
Compile warnings are no longer treated as errors. Script will still run.
Added a few useless and useful config options:
Write script source to harddisk for debug, Default compile language, Allowed compilers (languages), compile in release or debug mode, clean up old scripts on startup
Loads of warnings for incorrect config
Added comments and regions, restructured code
Changed a lot of AppDomain junk from console from using Console.Write to Log.Verbose and set it to #if DEBUG
All modules should now refresh their configuration runtime
Made all logging in ScriptEngine.Common get script name from actual engine
Renamed LSLLongCmdHandler to AsyncLSLCommandManager
Added auto-recover with 5 sec throttle for new MaintenanceThread
Bugfix: Scripts exceeding max and set to be killed were not killed, only removed.
Added ability to re-read configuration while OpenSim is running
All regions now sharing one MaintenanceThread
New MaintenanceThread:
- checks for script execution timeout
- re-reads config
- starts/stops threads if thread active count becomes too high/low compared to config
Speed increase on event execution:
- Reuse of try{}catch{} blocks
- Time calculation on event execution
* We still need to set the 'default particle' texture as, a particle system with no texture set doesn't work.
* The particle System Flags don't seem to be quite right yet as some flags don't seem to have an effect. So no alpha in/out, color change, affected by the wind, etc.. yet
* Thanks to Alondria for some massive work here. This update just tweaks a few things that she did.
* An example changed event syntax is at: http://opensimulator.org/wiki/Changed_Event_Example
* You can use this to trigger actions in your script if someone sits on your object_rez
* You can use this to figure out all of the CHANGED_ constants except for CHANGED_REGION, CHANGED_TELEPORT, and CHANGED_ALLOW_DROP
* Cleaned up copyright notices in AssemblyInfo.cs's
* Added Copyright headers to a bunch of files missing them
* Replaced several common string instances with a static constant to prevent reallocation of the same strings thousands of times. "" -> String.Empty is the first such candidate.
from the c# implementations of string.SubString(start,len) and string.Remove(start,len).
Especially since negative indexing and exclusion are included in the LSL versions.
This patch is closer to the LSL version. Maybe an osSubString and osRemoveString
would be appropriate?
Loads of things has been put into interfaces instead of the specific class.
We are now one step closer to ScriptServer, and its very easy to implement new script languages. Just a few lines required to make them a OpenSim script module with all its glory.
* PrimitiveBaseShape: The textures are now exposed as a 'TextureEntry Textures'; all serialization still using the 'byte[] TextureEntry' for backwards compatibility.
* Scene: Re-added AddTree, since the Tree type isn't gone from libsl, merely relocated.
* added Util.Clip(value, min, max)
* modified asset cache's numPackets calculation to use max packet size (600) instead of 1000
* removed a few magic numbers
llSetLinkColor() and a temp place holder for llOwnerSay() since many example scripts that are copy/pasted from outside sources have llOwnerSay() and its obnoxious to change in scripts each time.
The list type and a bunch of support functions to LSL
Added/ReImplmented: llGetListLength(), llList2Integer(), osList2Double() (note rename),
llList2Float(), llList2String(), llList2Key(), llList2Vector(), llList2Rot(),
llList2List(), llDeleteSubList(), llGetListEntryType(), llList2CSV(), llCSV2List(),
llListInsertList(), llDumpList2String(),
Borked Still: llListSort(), llListRandomize(), llList2ListStrided(), llListFindList(),
Changed: llHTTPRequest() (Made wrapper of LSL_Types.list->List<string>)
rot * rot, vec / rot, == and != overriders for Rotations and Vectors.
Also: llRotBetween(), llGetRegionTimeDilation(). And fixing:
Error in LSL2CSConverter that botched a variable with a type name in it (ex: rotationCenter)
Fixed: Error in LSL2CSConverter that parsed which() loops incorrectly.
Fixed: Changed definition of Quaternion to <x, y, z, r> from <x, y, z, t> (As per LSL)
Finished: llEuler2Rot()
This patch makes some enhancements to the llRemoteData functions. The
module is now a shared module, and allows remote data channels to be
created among multiple regions in the same sim. The port is controlled
from the remoteDataPort property under the [Network] section in
OpenSim.ini. If this setting is not present or = 0, the module is
disabled and no port is opened. llRemoteData commands have not effect
when module is disabled.
This patch implements the llHttpRequest function via a region module,
HttpScriptsRequest. There were bits and peices in LSLLong_cmd_handler,
which I moved into the region module, and just check for completed
requests and dispatch the http_response callback event instead.
works for me as of r2674
llResetScript() is now functional. With this patch, Kan-script 0000003 should run.
Noted the llListen(0,"","","") errored due to "" != UUID - patched to set to
NULL_KEY which then works to listen to everything.
float * vector, vector * float, vector / float, vector + vector,
vector - vector, vector * vector, vector % vector and changing
x, y, z, (and r) parts of vector and rotation to be lower case
(similar to LL's LSL vectors/rots). With these changes we should
expect to run kan-ed#1, kan-ed#2 and most of kan-ed#3.
llFrand, llSetColor, llGetColor, llSetTexture, llGetTexture,
llSetAlpha, llGetAlpha, llRotateTexture, llScaleTexture,
llOffsetTexture, llGetTextureOffset, llGetTextureScale, llGetTextureRot.
With these changes the "kan-ed" script #2 should be working.
Note this has lead to a big flat project, but I think a lot of the files we most likely don't even use any longer. And others belong in other projects/namespaces anyway.
Bugs 449, 454, 408, 244, 197
implemented InformClientOfNeighbours as an asynchroneous process, handling timeouts without blocking the main thread.
Improved logging of errors, removed catch all in try catch
* Introduced ModuleLoader.PickupModules that currently picks up IRegionModule:s from /bin
* Made LogBase thread-safe (or at least not thread-ignorant)
* Ignored some genned files
* There's no libsl reply packet field for it, I guess other channels than 0 makes no sense sending back to clients.
* We do not currently support objects listening, so there's really no way of actually using this feature.
So; somebody please wire chat all the way to the scripts.
Removed the reference to OpenJpeg in the DynamicTextureModule, to see if that was causing the build problem someone is having.
Added a Temporary fix for the "existing connection was forcibly closed by the remote host" exception on windows when a user logs out of a multiregion instance.
Some early work to prepare for improving the way clients are updated (about prims etc).
Some more modules templates classes (hoping that someone will pick some of these and work on implementing them).
Early version of the "Dynamic Texture Module", although currently there are no render modules included (so not really functional without them).
Added osSetDynamicTextureURL script function, for attaching a dynamic texture to a prim.
Some work on the console command handling. Added "change-region <regionname>" and "exit-region" so that after the use of change-region, the commands entered will apply to that region only. Then use exit-region to return to the top level (so commands then function as they did before and either apply to all regions or to the first region) (Note: this hasn't been tested very much)
Changed "ObjectID" in ScriptEngine to IScriptHost reference. Events will now be queued based on IScriptHost reference instead of string ID of object. Removed "root" object reference in script.
* Changed how Script accesses World
* Implemented llSay, llWhisper and llShout
* Added SetText() to IScriptHost, implemented llText
* Minor renamings to conform with code conventions
Melanie Thielker